SLE-RMON-MIB
170 objects
This MIB contains all needed informations about rmon and all supported sle rmon features.
Imported Objects
| DASAN-SMI | sleMgmt |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.9 | IdentitysleRmon | This MIB contains all needed informations about rmon and all supported sle rmon features. | ||
| 1.3.6.1.4.1.6296.101.9.1 | NodesleHistory | |||
| 1.3.6.1.4.1.6296.101.9.1.1 | TablesleHistoryTable | not-accessible | current | A list of history control entries. |
| 1.3.6.1.4.1.6296.101.9.1.1.1 | RowsleHistoryEntry | not-accessible | current | A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the sleHistoryControlInterval object might be named sleHistor… |
| 1.3.6.1.4.1.6296.101.9.1.1.1.1 | ColumnsleHistoryIndex | read-only | current | An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on t… |
| 1.3.6.1.4.1.6296.101.9.1.1.1.2 | ColumnsleHistoryDataSource | read-only | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntr… |
| 1.3.6.1.4.1.6296.101.9.1.1.1.3 | ColumnsleHistoryBucketsRequested | read-only | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry… |
| 1.3.6.1.4.1.6296.101.9.1.1.1.4 | ColumnsleHistoryBucketsGranted | read-only | current | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry. When… |
| 1.3.6.1.4.1.6296.101.9.1.1.1.5 | ColumnsleHistoryInterval | read-only | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This i… |
| 1.3.6.1.4.1.6296.101.9.1.1.1.6 | ColumnsleHistoryOwner | read-only | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.6296.101.9.1.1.1.7 | ColumnsleHistoryStatus | read-only | current | The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if thi… |
| 1.3.6.1.4.1.6296.101.9.1.2 | NodesleHistoryControl | |||
| 1.3.6.1.4.1.6296.101.9.1.2.1 | ScalarsleHistoryControlRequest | read-write | current | createHistory: sleHistoryControlIndex sleHistoryControlDataSource sleHistoryControlBucketsRequested sleHistoryControlInterval sleHistoryControlOwner sleHistory… |
| 1.3.6.1.4.1.6296.101.9.1.2.2 | ScalarsleHistoryControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.9.1.2.3 | ScalarsleHistoryControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.9.1.2.4 | ScalarsleHistoryControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.9.1.2.5 | ScalarsleHistoryControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.9.1.2.6 | ScalarsleHistoryControlIndex | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.9.1.2.7 | ScalarsleHistoryControlDataSource | read-write | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntr… |
| 1.3.6.1.4.1.6296.101.9.1.2.8 | ScalarsleHistoryControlBucketsRequested | read-write | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry… |
| 1.3.6.1.4.1.6296.101.9.1.2.9 | ScalarsleHistoryControlInterval | read-write | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This i… |
| 1.3.6.1.4.1.6296.101.9.1.2.10 | ScalarsleHistoryControlOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.6296.101.9.1.2.11 | ScalarsleHistoryControlSts | read-write | current | The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if thi… |
| 1.3.6.1.4.1.6296.101.9.1.3 | NodesleHistoryNotification | |||
| 1.3.6.1.4.1.6296.101.9.1.3.1 | NotificationsleHistoryCreated | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.1.3.2 | NotificationsleHistoryDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.1.3.3 | NotificationsleHistoryProfileChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.2 | NodesleAlarm | |||
| 1.3.6.1.4.1.6296.101.9.2.1 | TablesleAlarmTable | not-accessible | current | A list of alarm entries. |
| 1.3.6.1.4.1.6296.101.9.2.1.1 | RowsleAlarmEntry | not-accessible | current | A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the sleAlarmValue object might be named sleAlarmValue.8 |
| 1.3.6.1.4.1.6296.101.9.2.1.1.1 | ColumnsleAlarmIndex | read-only | current | An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. |
| 1.3.6.1.4.1.6296.101.9.2.1.1.2 | ColumnsleAlarmInterval | read-only | current | The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in… |
| 1.3.6.1.4.1.6296.101.9.2.1.1.3 | ColumnsleAlarmVariable | read-only | current | The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or … |
| 1.3.6.1.4.1.6296.101.9.2.1.1.4 | ColumnsleAlarmSampleType | read-only | current | The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), … |
| 1.3.6.1.4.1.6296.101.9.2.1.1.5 | ColumnsleAlarmValue | read-only | current | The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the sample… |
| 1.3.6.1.4.1.6296.101.9.2.1.1.6 | ColumnsleAlarmStartupAlarm | read-only | current | The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre… |
| 1.3.6.1.4.1.6296.101.9.2.1.1.7 | ColumnsleAlarmRisingThreshold | read-only | current | A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w… |
| 1.3.6.1.4.1.6296.101.9.2.1.1.8 | ColumnsleAlarmFallingThreshold | read-only | current | A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was … |
| 1.3.6.1.4.1.6296.101.9.2.1.1.9 | ColumnsleAlarmRisingEventIndex | read-only | current | The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident… |
| 1.3.6.1.4.1.6296.101.9.2.1.1.10 | ColumnsleAlarmFallingEventIndex | read-only | current | The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden… |
| 1.3.6.1.4.1.6296.101.9.2.1.1.11 | ColumnsleAlarmOwner | read-only | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.6296.101.9.2.1.1.12 | ColumnsleAlarmStatus | read-only | current | The status of this alarm entry. |
| 1.3.6.1.4.1.6296.101.9.2.2 | NodesleAlarmControl | |||
| 1.3.6.1.4.1.6296.101.9.2.2.1 | ScalarsleAlarmControlRequest | read-write | current | createAlarm: (sleAlarmControlIndex) sleAlarmInterval sleAlarmControlVariable sleAlarmControlSampleType sleAlarmControlStartupAlarm sleAlarmControlRisingThresho… |
| 1.3.6.1.4.1.6296.101.9.2.2.2 | ScalarsleAlarmControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.9.2.2.3 | ScalarsleAlarmControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.9.2.2.4 | ScalarsleAlarmControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.9.2.2.5 | ScalarsleAlarmControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.9.2.2.6 | ScalarsleAlarmControlIndex | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.9.2.2.7 | ScalarsleAlarmControlInterval | read-write | current | The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in… |
| 1.3.6.1.4.1.6296.101.9.2.2.8 | ScalarsleAlarmControlVariable | read-write | current | The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or … |
| 1.3.6.1.4.1.6296.101.9.2.2.9 | ScalarsleAlarmControlSampleType | read-write | current | The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), … |
| 1.3.6.1.4.1.6296.101.9.2.2.10 | ScalarsleAlarmControlStartupAlarm | read-write | current | The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre… |
| 1.3.6.1.4.1.6296.101.9.2.2.11 | ScalarsleAlarmControlRisingThreshold | read-write | current | A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w… |
| 1.3.6.1.4.1.6296.101.9.2.2.12 | ScalarsleAlarmControlFallingThreshold | read-write | current | A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was … |
| 1.3.6.1.4.1.6296.101.9.2.2.13 | ScalarsleAlarmControlRisingEventIndex | read-write | current | The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident… |
| 1.3.6.1.4.1.6296.101.9.2.2.14 | ScalarsleAlarmControlFallingEventIndex | read-write | current | The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden… |
| 1.3.6.1.4.1.6296.101.9.2.2.15 | ScalarsleAlarmControlOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.6296.101.9.2.2.16 | ScalarsleAlarmControlSts | read-write | current | The status of this alarm entry. |
| 1.3.6.1.4.1.6296.101.9.2.3 | NodesleAlarmNotification | |||
| 1.3.6.1.4.1.6296.101.9.2.3.1 | NotificationsleAlarmCreated | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.2.3.2 | NotificationsleAlarmDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.2.3.3 | NotificationsleAlarmProfileChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.3 | NodesleEvent | |||
| 1.3.6.1.4.1.6296.101.9.3.1 | TablesleEventTable | not-accessible | current | A list of events to be generated. |
| 1.3.6.1.4.1.6296.101.9.3.1.1 | RowsleEventEntry | not-accessible | current | A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the sleEventLastTimeSent object might… |
| 1.3.6.1.4.1.6296.101.9.3.1.1.1 | ColumnsleEventIndex | read-only | current | An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur. |
| 1.3.6.1.4.1.6296.101.9.3.1.1.2 | ColumnsleEventDescription | read-only | current | A comment describing this event entry. |
| 1.3.6.1.4.1.6296.101.9.3.1.1.3 | ColumnsleEventType | read-only | current | The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-t… |
| 1.3.6.1.4.1.6296.101.9.3.1.1.4 | ColumnsleEventCommunity | read-only | current | If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the p… |
| 1.3.6.1.4.1.6296.101.9.3.1.1.5 | ColumnsleEventLastTimeSent | read-only | current | The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero. |
| 1.3.6.1.4.1.6296.101.9.3.1.1.6 | ColumnsleEventOwner | read-only | current | The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has ass… |
| 1.3.6.1.4.1.6296.101.9.3.1.1.7 | ColumnsleEventStatus | read-only | current | The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent. |
| 1.3.6.1.4.1.6296.101.9.3.2 | NodesleEventControl | |||
| 1.3.6.1.4.1.6296.101.9.3.2.1 | ScalarsleEventControlRequest | read-write | current | createEvent: (sleEventControlIndex) sleEventControlDescription sleEventControlType sleEventControlCommunity sleEventControlOwner sleEventControlSts destroyEven… |
| 1.3.6.1.4.1.6296.101.9.3.2.2 | ScalarsleEventControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.9.3.2.3 | ScalarsleEventControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.9.3.2.4 | ScalarsleEventControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.9.3.2.5 | ScalarsleEventControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.9.3.2.6 | ScalarsleEventControlIndex | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.9.3.2.7 | ScalarsleEventControlDescription | read-write | current | A comment describing this event entry. |
| 1.3.6.1.4.1.6296.101.9.3.2.8 | ScalarsleEventControlType | read-write | current | The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-t… |
| 1.3.6.1.4.1.6296.101.9.3.2.9 | ScalarsleEventControlCommunity | read-write | current | If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the p… |
| 1.3.6.1.4.1.6296.101.9.3.2.10 | ScalarsleEventControlOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has ass… |
| 1.3.6.1.4.1.6296.101.9.3.2.11 | ScalarsleEventControlSts | read-write | current | The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent. |
| 1.3.6.1.4.1.6296.101.9.3.3 | NodesleEventNotification | |||
| 1.3.6.1.4.1.6296.101.9.3.3.1 | NotificationsleEventCreated | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.3.3.2 | NotificationsleEventDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.3.3.3 | NotificationsleEventProfileChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.4 | NodesleStatistics | |||
| 1.3.6.1.4.1.6296.101.9.4.1 | NodesleEtherStats | |||
| 1.3.6.1.4.1.6296.101.9.4.1.1 | TablesleEtherStatsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1 | RowsleEtherStatsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.1 | ColumnsleEtherStatsIndex | read-only | current | The value of this object uniquely identifies this sleEtherStats entry |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.2 | ColumnsleEtherStatsDataSource | read-only | current | This object identifies the source of the data that this sleEtherStats entry is configured to analyze. This source can be any ethernet interface on this device.… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.3 | ColumnsleEtherStatsDropEvents | read-only | current | The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets … |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.4 | ColumnsleEtherStatsOctets | read-only | current | The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can … |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.5 | ColumnsleEtherStatsPkts | read-only | current | The total number of packets (including bad packets, broadcast packets, and multicast packets) received. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.6 | ColumnsleEtherStatsBroadcastPkts | read-only | current | The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.7 | ColumnsleEtherStatsMulticastPkts | read-only | current | The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.8 | ColumnsleEtherStatsCRCAlignErrors | read-only | current | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.9 | ColumnsleEtherStatsUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.10 | ColumnsleEtherStatsOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.11 | ColumnsleEtherStatsFragments | read-only | current | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.12 | ColumnsleEtherStatsJabbers | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.13 | ColumnsleEtherStatsCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.14 | ColumnsleEtherStatsPkts64Octets | read-only | current | The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.15 | ColumnsleEtherStatsPkts65to127Octets | read-only | current | The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.16 | ColumnsleEtherStatsPkts128to255Octets | read-only | current | The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.17 | ColumnsleEtherStatsPkts256to511Octets | read-only | current | The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.18 | ColumnsleEtherStatsPkts512to1023Octets | read-only | current | The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.19 | ColumnsleEtherStatsPkts1024to1518Octets | read-only | current | The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.20 | ColumnsleEtherStatsOwner | read-only | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.21 | ColumnsleEtherStatsStatus | read-only | current | The status of this etherStats entry. |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.22 | ColumnsleEtherStatsClearedTime | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.9.4.1.2 | NodesleEtherStatsControl | |||
| 1.3.6.1.4.1.6296.101.9.4.1.2.1 | ScalarsleEtherStatsControlRequest | read-write | current | createEvent: (sleEventControlIndex) sleEventControlDescription sleEventControlType sleEventControlCommunity sleEventControlOwner sleEventControlSts destroyEven… |
| 1.3.6.1.4.1.6296.101.9.4.1.2.2 | ScalarsleEtherStatsControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.9.4.1.2.3 | ScalarsleEtherStatsControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.9.4.1.2.4 | ScalarsleEtherStatsControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.9.4.1.2.5 | ScalarsleEtherStatsControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.9.4.1.2.6 | ScalarsleEtherStatsControlIfIndex | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.9.5 | NodesleRmonSimple | |||
| 1.3.6.1.4.1.6296.101.9.5.1 | TablesleRmonSimpleTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.9.5.1.1 | RowsleRmonSimpleEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.9.5.1.1.1 | ColumnsleRmonSimplePortIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.6296.101.9.5.1.1.2 | ColumnsleRmonSimpleSampleVariable | read-only | current | The sample variable type. |
| 1.3.6.1.4.1.6296.101.9.5.1.1.3 | ColumnsleRmonSimpleSampleInterval | read-only | current | The sample interval. (10: minimum) |
| 1.3.6.1.4.1.6296.101.9.5.1.1.4 | ColumnsleRmonSimpleRisingThreshold | read-only | current | The rising threshold. |
| 1.3.6.1.4.1.6296.101.9.5.1.1.5 | ColumnsleRmonSimpleFallingThreshold | read-only | current | The falling threshold. |
| 1.3.6.1.4.1.6296.101.9.5.2 | NodesleRmonSimpleControl | |||
| 1.3.6.1.4.1.6296.101.9.5.2.1 | ScalarsleRmonSimpleControlRequest | read-write | current | Description |
| 1.3.6.1.4.1.6296.101.9.5.2.2 | ScalarsleRmonSimpleControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.9.5.2.3 | ScalarsleRmonSimpleControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.9.5.2.4 | ScalarsleRmonSimpleControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.9.5.2.5 | ScalarsleRmonSimpleControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.9.5.2.6 | ScalarsleRmonSimpleControlPortIndex | read-write | current | The port index. |
| 1.3.6.1.4.1.6296.101.9.5.2.7 | ScalarsleRmonSimpleControlSampleVariable | read-write | current | The sample variable type. (255: set all sample variable types) |
| 1.3.6.1.4.1.6296.101.9.5.2.8 | ScalarsleRmonSimpleControlSampleInterval | read-write | current | The sample interval.(10: minimum) |
| 1.3.6.1.4.1.6296.101.9.5.2.9 | ScalarsleRmonSimpleControlRisingThreshold | read-write | current | The rising threshold. |
| 1.3.6.1.4.1.6296.101.9.5.2.10 | ScalarsleRmonSimpleControlFallingThreshold | read-write | current | The falling threshold. |
| 1.3.6.1.4.1.6296.101.9.5.3 | NodesleRmonSimpleNotification | |||
| 1.3.6.1.4.1.6296.101.9.5.3.1 | NotificationsleRmonSimpleCreated | current | createRmonSimple | |
| 1.3.6.1.4.1.6296.101.9.5.3.2 | NotificationsleRmonSimpleDeleted | current | delRmonSimple | |
| 1.3.6.1.4.1.6296.101.9.6 | NodesleRmonSimpleQueue | |||
| 1.3.6.1.4.1.6296.101.9.6.1 | TablesleRmonSimpleQueueTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.9.6.1.1 | RowsleRmonSimpleQueueEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.9.6.1.1.1 | ColumnsleRmonSimpleQueuePortIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.6296.101.9.6.1.1.2 | ColumnsleRmonSimpleQueueSampleVariable | read-only | current | The sample variable type. |
| 1.3.6.1.4.1.6296.101.9.6.1.1.3 | ColumnsleRmonSimpleQueueQueueNumber | read-only | current | The queue number 0~7 |
| 1.3.6.1.4.1.6296.101.9.6.1.1.4 | ColumnsleRmonSimpleQueueSampleInterval | read-only | current | The sample interval. (10: minimum) |
| 1.3.6.1.4.1.6296.101.9.6.1.1.5 | ColumnsleRmonSimpleQueueRisingThreshold | read-only | current | The rising threshold. |
| 1.3.6.1.4.1.6296.101.9.6.1.1.6 | ColumnsleRmonSimpleQueueFallingThreshold | read-only | current | The falling threshold. |
| 1.3.6.1.4.1.6296.101.9.6.2 | NodesleRmonSimpleQueueControl | |||
| 1.3.6.1.4.1.6296.101.9.6.2.1 | ScalarsleRmonSimpleQueueControlRequest | read-write | current | Description |
| 1.3.6.1.4.1.6296.101.9.6.2.2 | ScalarsleRmonSimpleQueueControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.9.6.2.3 | ScalarsleRmonSimpleQueueControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.9.6.2.4 | ScalarsleRmonSimpleQueueControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.9.6.2.5 | ScalarsleRmonSimpleQueueControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.9.6.2.6 | ScalarsleRmonSimpleQueueControlPortIndex | read-write | current | The port index. |
| 1.3.6.1.4.1.6296.101.9.6.2.7 | ScalarsleRmonSimpleQueueControlSampleVariable | read-write | current | The sample variable type. |
| 1.3.6.1.4.1.6296.101.9.6.2.8 | ScalarsleRmonSimpleQueueControlQueueNumber | read-write | current | The queue number 0~7 |
| 1.3.6.1.4.1.6296.101.9.6.2.9 | ScalarsleRmonSimpleQueueControlSampleInterval | read-write | current | The sample interval. (10: minimum) |
| 1.3.6.1.4.1.6296.101.9.6.2.10 | ScalarsleRmonSimpleQueueControlRisingThreshold | read-write | current | The rising threshold. |
| 1.3.6.1.4.1.6296.101.9.6.2.11 | ScalarsleRmonSimpleQueueControlFallingThreshold | read-write | current | The falling threshold. |
| 1.3.6.1.4.1.6296.101.9.6.3 | NodesleRmonSimpleQueueNotification | |||
| 1.3.6.1.4.1.6296.101.9.6.3.1 | NotificationsleRmonSimpleQueueCreated | current | createRmonSimpleQueue | |
| 1.3.6.1.4.1.6296.101.9.6.3.2 | NotificationsleRmonSimpleQueueDeleted | current | createRmonSimpleQueue | |
| 1.3.6.1.4.1.6296.101.9.7 | GroupsleRmonGroup | current | Description. | |
| 1.3.6.1.4.1.6296.101.9.8 | GroupsleRmonNotificationGroup | current | Description. |