SLEV2-QOS-MIB

645 objects

sleV2QoS

Imported Objects

DASAN-SMI	sleV2Mgmt
IF-MIB	InterfaceIndex
INET-ADDRESS-MIB	InetAddress InetAddressPrefixLength InetAddressType
SLE-TC-MIB	SleControlRequestResultType SleControlStatusType
SNMPv2-CONF	NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	BITS Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TC	MacAddress TEXTUAL-CONVENTION

OID	Name	Access	Status	Description
1.3.6.1.4.1.6296.102.10	IdentitysleV2QoS			sleV2QoS
1.3.6.1.4.1.6296.102.10.1	NodesleV2QoSBase
1.3.6.1.4.1.6296.102.10.2	NodesleV2QoS4
1.3.6.1.4.1.6296.102.10.2.1	NodesleV2QoS4Base
1.3.6.1.4.1.6296.102.10.2.1.1	NodesleV2QoS4BaseInfo
1.3.6.1.4.1.6296.102.10.2.1.1.1	ScalarsleV2QoS4BaseFlowMode	read-only	current	flow mode default : double mode, extension : triple mode
1.3.6.1.4.1.6296.102.10.2.1.2	NodesleV2QoS4BaseControl
1.3.6.1.4.1.6296.102.10.2.1.2.1	ScalarsleV2QoS4BaseControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.1.2.2	ScalarsleV2QoS4BaseControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.1.2.3	ScalarsleV2QoS4BaseControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.1.2.4	ScalarsleV2QoS4BaseControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.1.2.5	ScalarsleV2QoS4BaseControlResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.1.2.6	ScalarsleV2QoS4BaseControlFlowMode	read-write	current	flow mode default : double mode, extension : triple
1.3.6.1.4.1.6296.102.10.2.1.3	NodesleV2QoS4BaseNotification
1.3.6.1.4.1.6296.102.10.2.1.3.1	NotificationsleV2QoS4BaseFlowModeChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.2	NodesleV2QoS4Flow
1.3.6.1.4.1.6296.102.10.2.2.1	NodesleV2QoS4FlowInfo
1.3.6.1.4.1.6296.102.10.2.2.1.1	TablesleV2QoS4FlowTable	not-accessible	current	flow table.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1	RowsleV2QoS4FlowEntry	not-accessible	current	key: sleV2QoS4FlowIndex
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.1	ColumnsleV2QoS4FlowIndex	read-only	current	The index of flow
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.2	ColumnsleV2QoS4FlowName	read-only	current	The name of flow
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.3	ColumnsleV2QoS4FlowEthernetType	read-only	current	The ethernet type value in incoming frames The value of -1 means any(not set).
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.4	ColumnsleV2QoS4FlowSrcMacAddr	read-only	current	The source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.5	ColumnsleV2QoS4FlowSrcMacAddrMask	read-only	current	The mask of the source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.6	ColumnsleV2QoS4FlowDstMacAddr	read-only	current	The destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.7	ColumnsleV2QoS4FlowDstMacAddrMask	read-only	current	The mask of the destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.8	ColumnsleV2QoS4Flow8021p	read-only	current	The value of the IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.9	ColumnsleV2QoS4FlowSrcIpAddr	read-only	current	The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.10	ColumnsleV2QoS4FlowSrcIpAddrMask	read-only	current	The mask of source IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.11	ColumnsleV2QoS4FlowDstIpAddr	read-only	current	The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.12	ColumnsleV2QoS4FlowDstIpAddrMask	read-only	current	The mask of destination IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.13	ColumnsleV2QoS4FlowIpPktPriorityType	read-only	current	The Priority type of incoming IP packet (specify a type of sleUserFlowIpPktPriority)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.14	ColumnsleV2QoS4FlowIpPktPriority	read-only	current	The Priority value of incoming IP packet If type is 1, this value's range is 0-7. If type is 2, this value's range is 0-63. If type is 3, this value's range is…
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.15	ColumnsleV2QoS4FlowPktLen	read-only	current	The packet length of the incoming packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.16	ColumnsleV2QoS4FlowProtocolType	read-only	current	The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpS…
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.17	ColumnsleV2QoS4FlowTcpSrcStartPort	read-only	current	The start source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.18	ColumnsleV2QoS4FlowTcpSrcEndPort	read-only	current	The end source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.19	ColumnsleV2QoS4FlowTcpDstStartPort	read-only	current	The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.20	ColumnsleV2QoS4FlowTcpDstEndPort	read-only	current	The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.21	ColumnsleV2QoS4FlowTcpFlag	read-only	current	The flag in TCP packet
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.22	ColumnsleV2QoS4FlowUdpSrcStartPort	read-only	current	The start source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.23	ColumnsleV2QoS4FlowUdpSrcEndPort	read-only	current	The end source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.24	ColumnsleV2QoS4FlowUdpDstStartPort	read-only	current	The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.25	ColumnsleV2QoS4FlowUdpDstEndPort	read-only	current	The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.26	ColumnsleV2QoS4FlowIcmpType	read-only	current	The type of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.27	ColumnsleV2QoS4FlowIcmpCode	read-only	current	The code of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.28	ColumnsleV2QoS4FlowHdrlen	read-only	current	The IP header length. The value of 0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.29	ColumnsleV2QoS4FlowHdrError	read-only	current	The IP header error check
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.30	ColumnsleV2QoS4FlowInnerVlan	read-only	current	The index of inner vlan. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.31	ColumnsleV2QoS4FlowInner8021p	read-only	current	The value of the Inner IEEE802.1p priority in the packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.32	ColumnsleV2QoS4FlowMacFlag	read-only	current	The any flag of mac address
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.33	ColumnsleV2QoS4FlowIpFlag	read-only	current	The any flag of IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.34	ColumnsleV2QoS4FlowMacDlf	read-only	current	The destination mac address is found or not.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.35	ColumnsleV2QoS4FlowTagType	read-only	current	The packet tag type
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.36	ColumnsleV2QoS4FlowInPktTagVid	read-only	current	VID, 4095 : any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.37	ColumnsleV2QoS4FlowInPktTagCfi	read-only	current	CFI, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.38	ColumnsleV2QoS4FlowInPktTagCoS	read-only	current	802.1p, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.39	ColumnsleV2QoS4FlowOutPktTagVid	read-only	current	VID, 4095 : any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.40	ColumnsleV2QoS4FlowOutPktTagCfi	read-only	current	CFI, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.41	ColumnsleV2QoS4FlowOutPktTagCoS	read-only	current	802.1p, 255:any
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.42	ColumnsleV2QoS4FlowFlowAlias	read-only	current	flow alias
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.43	ColumnsleV2QoSFlowInetAddrType	read-only	current	IP address type
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.44	ColumnsleV2QoSFlowSrcInetAddr	read-only	current	The IP address to match against the packet��s source IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.45	ColumnsleV2QoSFlowDstInetAddr	read-only	current	The IP address to match against the packet��s destination IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.46	ColumnsleV2QoSFlowSrcInetAddrLen	read-only	current	The prefix length of source IP address
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.47	ColumnsleV2QoSFlowDstInetAddrLen	read-only	current	The prefix length of destination IP address
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.48	ColumnsleV2QoSFlowTrafficClass	read-only	current	The traffic class of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.49	ColumnsleV2QoSFlowFlowLabel	read-only	current	The flow label of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.50	ColumnsleV2QoS4FlowOuterVlan	read-only	current	The index of outer vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.51	ColumnsleV2QoS4FlowOuter8021p	read-only	current	The value of the outer IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.1.1.52	ColumnsleV2QoS4FlowOnuCircuitId	read-only	current	The value of the Onu Circuit-id The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2	NodesleV2QoS4FlowControl
1.3.6.1.4.1.6296.102.10.2.2.1.2.1	ScalarsleV2QoS4FlowControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.2	ScalarsleV2QoS4FlowControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.3	ScalarsleV2QoS4FlowControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.4	ScalarsleV2QoS4FlowControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.2.1.2.5	ScalarsleV2QoS4FlowControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.2.1.2.6	ScalarsleV2QoS4FlowControlIndex	read-write	current	The index of flow
1.3.6.1.4.1.6296.102.10.2.2.1.2.7	ScalarsleV2QoS4FlowControlName	read-write	current	The name of flow
1.3.6.1.4.1.6296.102.10.2.2.1.2.8	ScalarsleV2QoS4FlowControlEthernetType	read-write	current	The ethernet type value in incoming frames The value of -1 means any(not set).
1.3.6.1.4.1.6296.102.10.2.2.1.2.9	ScalarsleV2QoS4FlowControlSrcMacAddr	read-write	current	The source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.10	ScalarsleV2QoS4FlowControlSrcMacAddrMask	read-write	current	The mask of the source mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.11	ScalarsleV2QoS4FlowControlDstMacAddr	read-write	current	The destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.12	ScalarsleV2QoS4FlowControlDstMacAddrMask	read-write	current	The mask of the destination mac address The value of 00:00:00:00:00:00 is any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.13	ScalarsleV2QoS4FlowControl8021p	read-write	current	The value of the IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.14	ScalarsleV2QoS4FlowControlSrcIpAddr	read-write	current	The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.15	ScalarsleV2QoS4FlowControlSrcIpAddrMask	read-write	current	The mask of source IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.16	ScalarsleV2QoS4FlowControlDstIpAddr	read-write	current	The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.17	ScalarsleV2QoS4FlowControlDstIpAddrMask	read-write	current	The mask of destination IP address The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.18	ScalarsleV2QoS4FlowControlIpPktPriorityType	read-write	current	The Priority type of incoming IP packet (specify a type of sleUserFlowIpPktPriority) The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.19	ScalarsleV2QoS4FlowControlIpPktPriority	read-write	current	The Priority value of incoming IP packet If type is 1, this value's range is 0-7. If type is 2, this value's range is 0-63. If type is 3, this value's range is…
1.3.6.1.4.1.6296.102.10.2.2.1.2.20	ScalarsleV2QoS4FlowControlPktLen	read-write	current	The packet length of the incoming packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.21	ScalarsleV2QoS4FlowControlProtocolType	read-write	current	The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowCont…
1.3.6.1.4.1.6296.102.10.2.2.1.2.22	ScalarsleV2QoS4FlowControlTcpSrcStartPort	read-write	current	The start source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.23	ScalarsleV2QoS4FlowControlTcpSrcEndPort	read-write	current	The end source port in range of source port in TCP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.24	ScalarsleV2QoS4FlowControlTcpDstStartPort	read-write	current	The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.25	ScalarsleV2QoS4FlowControlTcpDstEndPort	read-write	current	The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.26	ScalarsleV2QoS4FlowControlTcpFlag	read-write	current	The flag in TCP packet
1.3.6.1.4.1.6296.102.10.2.2.1.2.27	ScalarsleV2QoS4FlowControlUdpSrcStartPort	read-write	current	The start source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.28	ScalarsleV2QoS4FlowControlUdpSrcEndPort	read-write	current	The end source port in range of source port in UDP packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.29	ScalarsleV2QoS4FlowControlUdpDstStartPort	read-write	current	The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.30	ScalarsleV2QoS4FlowControlUdpDstEndPort	read-write	current	The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.31	ScalarsleV2QoS4FlowControlIcmpType	read-write	current	The type of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.32	ScalarsleV2QoS4FlowControlIcmpCode	read-write	current	The code of ICMP message The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.33	ScalarsleV2QoS4FlowControlHdrlen	read-write	current	The IP header error check
1.3.6.1.4.1.6296.102.10.2.2.1.2.34	ScalarsleV2QoS4FlowControlHdrError	read-write	current	The IP header error check
1.3.6.1.4.1.6296.102.10.2.2.1.2.35	ScalarsleV2QoS4FlowControlInnerVlan	read-write	current	The index of inner vlan. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.36	ScalarsleV2QoS4FlowControlInner8021p	read-write	current	The value of the Inner IEEE802.1p priority in the packet. The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.37	ScalarsleV2QoS4FlowControlMacFlag	read-write	current	The any flag of mac address
1.3.6.1.4.1.6296.102.10.2.2.1.2.38	ScalarsleV2QoS4FlowControlIpFlag	read-write	current	The any flag of IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.2.39	ScalarsleV2QoS4FlowControlMacDlf	read-write	current	The destination MAC address found or not
1.3.6.1.4.1.6296.102.10.2.2.1.2.40	ScalarsleV2QoS4FlowControlTagType	read-write	current	The packet tag type
1.3.6.1.4.1.6296.102.10.2.2.1.2.41	ScalarsleV2QoS4FlowControlPktTagVid	read-only	current	VID, 4095 : any All VID, CFI, CoS are -1 : clear command
1.3.6.1.4.1.6296.102.10.2.2.1.2.42	ScalarsleV2QoS4FlowControlPktTagCfi	read-only	current	CFI, 255:any All VID, CFI, CoS are -1 : clear command
1.3.6.1.4.1.6296.102.10.2.2.1.2.43	ScalarsleV2QoS4FlowControlPktTagCoS	read-only	current	802.1p, 255:any All VID, CFI, CoS are -1 : clear command
1.3.6.1.4.1.6296.102.10.2.2.1.2.44	ScalarsleV2QoS4FlowControlFlowAlias	read-only	current	flow alias
1.3.6.1.4.1.6296.102.10.2.2.1.2.45	ScalarsleV2QoSFlowControlInetAddrType	read-only	current	IP address type
1.3.6.1.4.1.6296.102.10.2.2.1.2.46	ScalarsleV2QoSFlowControlSrcInetAddr	read-only	current	The IP address to match against the packet��s source IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.2.47	ScalarsleV2QoSFlowControlDstInetAddr	read-only	current	The IP address to match against the packet��s destination IP address.
1.3.6.1.4.1.6296.102.10.2.2.1.2.48	ScalarsleV2QoSFlowControlSrcInetAddrLen	read-only	current	The prefix length of source IP address
1.3.6.1.4.1.6296.102.10.2.2.1.2.49	ScalarsleV2QoSFlowControlDstInetAddrLen	read-only	current	The prefix length of destination IP address
1.3.6.1.4.1.6296.102.10.2.2.1.2.50	ScalarsleV2QoSFlowControlTrafficClass	read-write	current	The traffic class of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.51	ScalarsleV2QoSFlowControlFlowLabel	read-write	current	The flow label of IPv6 header The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.52	ScalarsleV2QoS4FlowControlOuterVlan	read-write	current	The index of outer vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.53	ScalarsleV2QoS4FlowControlOuter8021p	read-write	current	The value of the outer IEEE802.1p priority in the packet The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.2.54	ScalarsleV2QoS4FlowControlOnuCircuitId	read-write	current	The value of the Onu Circuit-id The value of -1 means any(not set)
1.3.6.1.4.1.6296.102.10.2.2.1.3	NodesleV2QoS4FlowNotification
1.3.6.1.4.1.6296.102.10.2.2.1.3.1	NotificationsleFlowCreated		current	Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.2	NotificationsleFlowChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.3	NotificationsleFlowDestroyed		current	Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.4	NotificationsleFlowAllDestroyed		current	Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.5	NotificationsleFlowInPktTagChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.2.1.3.6	NotificationsleFlowOutPktTagChanged		current	setOutPktTag
1.3.6.1.4.1.6296.102.10.2.2.1.3.7	NotificationsleFlowAliasChanged		current	setFlowAlias
1.3.6.1.4.1.6296.102.10.2.2.1.3.8	NotificationsleFlowExCreated		current	createFlowEx
1.3.6.1.4.1.6296.102.10.2.2.1.3.9	NotificationsleFlowExChanged		current	setFlowEx
1.3.6.1.4.1.6296.102.10.2.2.2	NodesleV2QoS4FlowClass
1.3.6.1.4.1.6296.102.10.2.2.2.1	TablesleV2QoS4FlowClassTable	not-accessible	current	flow class table.
1.3.6.1.4.1.6296.102.10.2.2.2.1.1	RowsleV2QoS4FlowClassEntry	not-accessible	current	key: sleV2QoS4FlowIndex, sleV2QoS4FlowClassIndex
1.3.6.1.4.1.6296.102.10.2.2.2.1.1.1	ColumnsleV2QoS4FlowClassIndex	read-only	current	The index of the class for the flow
1.3.6.1.4.1.6296.102.10.2.2.2.1.1.2	ColumnsleV2QoS4FlowClassID	read-only	current	The identifier of the class
1.3.6.1.4.1.6296.102.10.2.2.2.1.1.3	ColumnsleV2QoS4FlowClassName	read-only	current	The name of the class
1.3.6.1.4.1.6296.102.10.2.2.3	NodesleV2QoS4FlowPolicy
1.3.6.1.4.1.6296.102.10.2.2.3.1	TablesleV2QoS4FlowPolicyTable	not-accessible	current	flow policy table.
1.3.6.1.4.1.6296.102.10.2.2.3.1.1	RowsleV2QoS4FlowPolicyEntry	not-accessible	current	key: sleV2QoS4FlowIndex, sleV2QoS4FlowPolicyIndex
1.3.6.1.4.1.6296.102.10.2.2.3.1.1.1	ColumnsleV2QoS4FlowPolicyIndex	read-only	current	The index of the policy for the flow
1.3.6.1.4.1.6296.102.10.2.2.3.1.1.2	ColumnsleV2QoS4FlowPolicyID	read-only	current	The identifier of the policy
1.3.6.1.4.1.6296.102.10.2.2.3.1.1.3	ColumnsleV2QoS4FlowPolicyName	read-only	current	The name of the policy
1.3.6.1.4.1.6296.102.10.2.3	NodesleV2QoS4Class
1.3.6.1.4.1.6296.102.10.2.3.1	NodesleV2QoS4ClassInfo
1.3.6.1.4.1.6296.102.10.2.3.1.1	TablesleV2QoS4ClassTable	not-accessible	current	class table.
1.3.6.1.4.1.6296.102.10.2.3.1.1.1	RowsleV2QoS4ClassEntry	not-accessible	current	key: sleV2QoS4ClassIndex
1.3.6.1.4.1.6296.102.10.2.3.1.1.1.1	ColumnsleV2QoS4ClassIndex	read-only	current	The index of class
1.3.6.1.4.1.6296.102.10.2.3.1.1.1.2	ColumnsleV2QoS4ClassName	read-only	current	The name of class
1.3.6.1.4.1.6296.102.10.2.3.1.1.1.3	ColumnsleV2QoS4ClassFlowCnt	read-only	current	The counter of flow in class
1.3.6.1.4.1.6296.102.10.2.3.1.2	NodesleV2QoS4ClassControl
1.3.6.1.4.1.6296.102.10.2.3.1.2.1	ScalarsleV2QoS4ClassControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.2	ScalarsleV2QoS4ClassControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.3	ScalarsleV2QoS4ClassControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.4	ScalarsleV2QoS4ClassControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.3.1.2.5	ScalarsleV2QoS4ClassControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.3.1.2.6	ScalarsleV2QoS4ClassControlIndex	read-write	current	The index of class
1.3.6.1.4.1.6296.102.10.2.3.1.2.7	ScalarsleV2QoS4ClassControlName	read-write	current	The name of class
1.3.6.1.4.1.6296.102.10.2.3.1.3	NodesleV2QoS4ClassNotification
1.3.6.1.4.1.6296.102.10.2.3.1.3.1	NotificationsleClassCreated		current	Description.
1.3.6.1.4.1.6296.102.10.2.3.1.3.2	NotificationsleClassDestroyed		current	Description.
1.3.6.1.4.1.6296.102.10.2.3.1.3.3	NotificationsleClassAllDestroyed		current	Description.
1.3.6.1.4.1.6296.102.10.2.3.2	NodesleV2QoS4ClassFlow
1.3.6.1.4.1.6296.102.10.2.3.2.1	TablesleV2QoS4ClassFlowTable	not-accessible	current	class flow table.
1.3.6.1.4.1.6296.102.10.2.3.2.1.1	RowsleV2QoS4ClassFlowEntry	not-accessible	current	key: sleV2QoS4ClassIndex, sleV2QoS4ClassFlowIndex
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.1	ColumnsleV2QoS4ClassFlowIndex	read-only	current	The index of flow in class
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.2	ColumnsleV2QoS4ClassFlowID	read-only	current	The identifier of flow
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.3	ColumnsleV2QoS4ClassFlowName	read-only	current	The name of the flow
1.3.6.1.4.1.6296.102.10.2.3.2.1.1.4	ColumnsleV2QoS4ClassFlowClassName	read-only	current	The class name of the flow
1.3.6.1.4.1.6296.102.10.2.3.2.2	NodesleV2QoS4ClassFlowControl
1.3.6.1.4.1.6296.102.10.2.3.2.2.1	ScalarsleV2QoS4ClassFlowControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.2	ScalarsleV2QoS4ClassFlowControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.3	ScalarsleV2QoS4ClassFlowControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.4	ScalarsleV2QoS4ClassFlowControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.3.2.2.5	ScalarsleV2QoS4ClassFlowControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.3.2.2.6	ScalarsleV2QoS4ClassFlowControlClassIndex	read-write	current	The index of class
1.3.6.1.4.1.6296.102.10.2.3.2.2.7	ScalarsleV2QoS4ClassFlowControlFlowIndex	read-write	current	The index of flow in this class
1.3.6.1.4.1.6296.102.10.2.3.2.2.8	ScalarsleV2QoS4ClassFlowControlFlowID	read-write	current	The index of flow Refer to sleV2QoS4FlowIndex
1.3.6.1.4.1.6296.102.10.2.3.2.2.9	ScalarsleV2QoS4ClassFlowControlClassName	read-write	current	The class name of class-flow
1.3.6.1.4.1.6296.102.10.2.3.2.3	NodesleV2QoS4ClassFlowNotification
1.3.6.1.4.1.6296.102.10.2.3.2.3.1	NotificationsleClassFlowAdded		current	Description.
1.3.6.1.4.1.6296.102.10.2.3.2.3.2	NotificationsleClassFlowDeleted		current	Description.
1.3.6.1.4.1.6296.102.10.2.3.2.3.3	NotificationsleClassFlowAllDeleted		current	Description.
1.3.6.1.4.1.6296.102.10.2.3.3	NodesleV2QoS4ClassPolicy
1.3.6.1.4.1.6296.102.10.2.3.3.1	TablesleV2QoS4ClassPolicyTable	not-accessible	current	class policy table.
1.3.6.1.4.1.6296.102.10.2.3.3.1.1	RowsleV2QoS4ClassPolicyEntry	not-accessible	current	key: sleV2QoS4ClassIndex, sleV2QoS4ClassPolicyIndex
1.3.6.1.4.1.6296.102.10.2.3.3.1.1.1	ColumnsleV2QoS4ClassPolicyIndex	read-only	current	The index of the policy for the class
1.3.6.1.4.1.6296.102.10.2.3.3.1.1.2	ColumnsleV2QoS4ClassPolicyID	read-only	current	The identifier of the policy
1.3.6.1.4.1.6296.102.10.2.3.3.1.1.3	ColumnsleV2QoS4ClassPolicyName	read-only	current	The name of the policy
1.3.6.1.4.1.6296.102.10.2.4	NodesleV2QoS4Policer
1.3.6.1.4.1.6296.102.10.2.4.1	NodesleV2QoS4PolicerInfo
1.3.6.1.4.1.6296.102.10.2.4.1.1	TablesleV2QoS4PolicerTable	not-accessible	current	policer table.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1	RowsleV2QoS4PolicerEntry	not-accessible	current	key: sleV2QoS4PolicerIndex
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.1	ColumnsleV2QoS4PolicerIndex	read-only	current	The index of policer
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.2	ColumnsleV2QoS4PolicerName	read-only	current	The name of policer
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.3	ColumnsleV2QoS4PolicerMeterMode	read-only	current	The meter mode. *) According to this value, rate-limit, color-marking and min-max-bandwidth exclusively activated. The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.4	ColumnsleV2QoS4PolicerRateLimit	read-write	current	The packet rate limit The value of -1 unlimit(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.5	ColumnsleV2QoS4PolicerColorType	read-only	current	Color marking type Available Value : srTCM or trTCM srTCM = Single Rate Three Color Marking trTCM = Two Rate Three Color Marking The value of -1 means nothing(…
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.6	ColumnsleV2QoS4PolicerColorMode	read-only	current	Color marking mode. The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.7	ColumnsleV2QoS4PolicerColorAwareMode	read-only	current	Color marking aware mode *) Used only when sleV2QoS4PolicerColorMode is aware The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.8	ColumnsleV2QoS4PolicerColorCIR	read-only	current	Committed Information Rate. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.9	ColumnsleV2QoS4PolicerColorCBS	read-only	current	Committed Burst Size. The value is in unit for square of 2 bits The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.10	ColumnsleV2QoS4PolicerColorPIR	read-only	current	Peak Information Rate. *) Used only when sleV2QoS4PolicerColorType is trTCM. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.11	ColumnsleV2QoS4PolicerColorPBS	read-only	current	Peak Burst Size. *) Used only when sleV2QoS4PolicerColorType is trTCM. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.12	ColumnsleV2QoS4PolicerColorEBS	read-only	current	Excess Burst Size. *) Used only when sleV2QoS4PolicerColorType is srTCM. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.13	ColumnsleV2QoS4PolicerColorRedAction	read-only	current	The action to be apply when incoming packet is colored in red. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.14	ColumnsleV2QoS4PolicerColorYellowAction	read-only	current	The action to be apply when incoming packet is colored in yellow. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.15	ColumnsleV2QoS4PolicerColorGreenAction	read-only	current	The action to be apply when incoming packet is colored in green. (not supported) The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.16	ColumnsleV2QoS4PolicerRemarkLayerMode	read-only	current	The remark mode 0 : Layer3 1 : Layer2
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.17	ColumnsleV2QoS4PolicerRemarkMode	read-only	current	This value is available when sleV2QoS4PolicerRemarkLayerMode bit was checked(one or more) 0 : remark Queue 1 : remark External CoS
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.18	ColumnsleV2QoS4PolicerCounterMode	read-only	current	The counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.19	ColumnsleV2QoS4PolicerAvrgCounterMode	read-only	current	The average counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.20	ColumnsleV2QoS4PolicerMinBandwidth	read-only	current	The minium bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.21	ColumnsleV2QoS4PolicerMaxBandwidth	read-only	current	The maximum bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.22	ColumnsleV2QoS4PolicerColorRedDscp	read-only	current	The desc value to be apply when incoming packet is colored in red. Default : 30(0x1e)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.23	ColumnsleV2QoS4PolicerColorYellowDscp	read-only	current	The desc value to be apply when incoming packet is colored in yellow. Default : 28(0x1c)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.24	ColumnsleV2QoS4PolicerColorGreenDscp	read-only	current	The desc value to be apply when incoming packet is colored in green. Default : 30(0x1a)
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.25	ColumnsleV2QoS4PolicerColorRedCosType	read-only	current	The CoS type colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.26	ColumnsleV2QoS4PolicerColorRedCos	read-only	current	The CoS colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.27	ColumnsleV2QoS4PolicerColorYellowCosType	read-only	current	The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.28	ColumnsleV2QoS4PolicerColorYellowCos	read-only	current	The CoS colored in yellow.
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.29	ColumnsleV2QoS4PolicerColorGreenCosType	read-only	current	The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.1.1.30	ColumnsleV2QoS4PolicerColorGreenCos	read-only	current	The CoS colored in green.
1.3.6.1.4.1.6296.102.10.2.4.1.2	NodesleV2QoS4PolicerControl
1.3.6.1.4.1.6296.102.10.2.4.1.2.1	ScalarsleV2QoS4PolicerControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.2	ScalarsleV2QoS4PolicerControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.3	ScalarsleV2QoS4PolicerControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.4	ScalarsleV2QoS4PolicerControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.4.1.2.5	ScalarsleV2QoS4PolicerControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.4.1.2.6	ScalarsleV2QoS4PolicerControlIndex	read-write	current	The index of policer
1.3.6.1.4.1.6296.102.10.2.4.1.2.7	ScalarsleV2QoS4PolicerControlName	read-write	current	The name of policer
1.3.6.1.4.1.6296.102.10.2.4.1.2.8	ScalarsleV2QoS4PolicerControlMeterMode	read-write	current	The meter mode. *) According to this value, rate-limit and color-marking exclusively activated. The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.9	ScalarsleV2QoS4PolicerControlRateLimit	read-write	current	The packet rate limit The value of -1 unlimit(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.10	ScalarsleV2QoS4PolicerControlColorType	read-write	current	Color marking type Available Value : srTCM or trTCM srTCM = Single Rate Three Color Marking trTCM = Two Rate Three Color Marking The value of -1 is nothing(not…
1.3.6.1.4.1.6296.102.10.2.4.1.2.11	ScalarsleV2QoS4PolicerControlColorMode	read-write	current	Color marking mode. *) Used only when sleColorMarkingMode is aware The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.12	ScalarsleV2QoS4PolicerControlColorAwareMode	read-write	current	Color marking aware mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.13	ScalarsleV2QoS4PolicerControlColorCIR	read-write	current	Committed Information Rate. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.14	ScalarsleV2QoS4PolicerControlColorCBS	read-write	current	Committed Burst Size. The value is in unit for square of 2 bits The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.15	ScalarsleV2QoS4PolicerControlColorPIR	read-write	current	Peak Information Rate. *) Used only when sleV2QoS4PolicerColorMode is Aware. The value is in unit for 64 kbps. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.16	ScalarsleV2QoS4PolicerControlColorPBS	read-write	current	Peak Burst Size. *) Used only when sleV2QoS4PolicerColorMode is Aware. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.17	ScalarsleV2QoS4PolicerControlColorEBS	read-write	current	Excess Burst Size. *) Used only when sleV2QoS4PolicerColorMode is Blind. The value is in unit for square of 2 bits. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.18	ScalarsleV2QoS4PolicerControlColorRedAction	read-write	current	The action to be apply when incoming packet is colored in red. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.19	ScalarsleV2QoS4PolicerControlColorYellowAction	read-write	current	The action to be apply when incoming packet is colored in yellow. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.20	ScalarsleV2QoS4PolicerControlColorGreenAction	read-write	current	The action to be apply when incoming packet is colored in green. (not supported) The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.21	ScalarsleV2QoS4PolicerControlRemarkLayerMode	read-write	current	The remark mode 0 : Layer3 1 : Layer2
1.3.6.1.4.1.6296.102.10.2.4.1.2.22	ScalarsleV2QoS4PolicerControlRemarkMode	read-only	current	This value is available when sleV2QoS4PolicerControlRemarkLayerMode bit was checked(one or more) 0 : remark to Queue 1 : remark to External CoS
1.3.6.1.4.1.6296.102.10.2.4.1.2.23	ScalarsleV2QoS4PolicerControlCounterMode	read-write	current	The counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.24	ScalarsleV2QoS4PolicerControlAvrgCounterMode	read-write	current	The average counter mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.4.1.2.25	ScalarsleV2QoS4PolicerControlMinBandwidth	read-write	current	The minimum bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.2.26	ScalarsleV2QoS4PolicerControlMaxBandwidth	read-write	current	The maximum bandwidth
1.3.6.1.4.1.6296.102.10.2.4.1.2.27	ScalarsleV2QoS4PolicerControlColorRedDscp	read-write	current	The dscp value to be apply when incoming packet is colored in red
1.3.6.1.4.1.6296.102.10.2.4.1.2.28	ScalarsleV2QoS4PolicerControlColorYellowDscp	read-write	current	The dscp value to be apply when incoming packet is colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.2.29	ScalarsleV2QoS4PolicerControlColorGreenDscp	read-write	current	The dscp value to be apply when incoming packet is colored in green
1.3.6.1.4.1.6296.102.10.2.4.1.2.30	ScalarsleV2QoS4PolicerControlColorRedCosType	read-write	current	The CoS type colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.2.31	ScalarsleV2QoS4PolicerControlColorRedCos	read-write	current	The CoS colored in red.
1.3.6.1.4.1.6296.102.10.2.4.1.2.32	ScalarsleV2QoS4PolicerControlColorYellowCosType	read-write	current	The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.2.33	ScalarsleV2QoS4PolicerControlColorYellowCos	read-write	current	The CoS colored in yellow.
1.3.6.1.4.1.6296.102.10.2.4.1.2.34	ScalarsleV2QoS4PolicerControlColorGreenCosType	read-write	current	The CoS type colored in yellow
1.3.6.1.4.1.6296.102.10.2.4.1.2.35	ScalarsleV2QoS4PolicerControlColorGreenCos	read-write	current	The CoS colored in green.
1.3.6.1.4.1.6296.102.10.2.4.1.3	NodesleV2QoS4PolicerNotification
1.3.6.1.4.1.6296.102.10.2.4.1.3.1	NotificationslePolicerCreated		current	Description.
1.3.6.1.4.1.6296.102.10.2.4.1.3.2	NotificationslePolicerChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.4.1.3.3	NotificationslePolicerDestroyed		current	Description.
1.3.6.1.4.1.6296.102.10.2.4.2	NodesleV2QoS4PolicerMatchCounter
1.3.6.1.4.1.6296.102.10.2.4.2.1	TablesleV2QoS4PolicerMatchCounterTable	not-accessible	current	policer match counter table.
1.3.6.1.4.1.6296.102.10.2.4.2.1.1	RowsleV2QoS4PolicerMatchCounterEntry	not-accessible	current	key: sleV2QoS4PolicerMatchCounterName
1.3.6.1.4.1.6296.102.10.2.4.2.1.1.1	ColumnsleV2QoS4PolicerMatchCounterName	read-only	current	The rule-counter policer name
1.3.6.1.4.1.6296.102.10.2.4.2.1.1.2	ColumnsleV2QoS4PolicerMatchCounterDesc	read-only	current	The rule-counter policer description.
1.3.6.1.4.1.6296.102.10.2.4.2.1.1.3	ColumnsleV2QoS4PolicerMatchCounterValue	read-only	current	The counter-value of matched policer.
1.3.6.1.4.1.6296.102.10.2.5	NodesleV2QoS4Policy
1.3.6.1.4.1.6296.102.10.2.5.1	NodesleV2QoS4PolicyInfo
1.3.6.1.4.1.6296.102.10.2.5.1.1	TablesleV2QoS4PolicyTable	not-accessible	current	policy table.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1	RowsleV2QoS4PolicyEntry	not-accessible	current	key: sleV2QoS4PolicyIndex
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.1	ColumnsleV2QoS4PolicyIndex	read-only	current	The index of policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.2	ColumnsleV2QoS4PolicyName	read-only	current	The name of policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.3	ColumnsleV2QoS4PolicyFlowCnt	read-only	current	The counter of flow that was included to policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.4	ColumnsleV2QoS4PolicyClassCnt	read-only	current	The counter of class that was included to policy
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.5	ColumnsleV2QoS4PolicyPolicerIndex	read-only	current	The index of policer 0: no policer
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.6	ColumnsleV2QoS4PolicyPriority	read-only	current	The priority of the policy low : default value
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.7	ColumnsleV2QoS4PolicyIngressPorts	read-only	current	The ingress port map
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.8	ColumnsleV2QoS4PolicyEgressPorts	read-only	current	The egress port map
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.9	ColumnsleV2QoS4PolicyVlan	read-only	current	The index of vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.10	ColumnsleV2QoS4PolicyMatchFlag	read-write	current	The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS…
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.11	ColumnsleV2QoS4PolicyMatchVlan	read-only	current	The vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.12	ColumnsleV2QoS4PolicyMatchRedirectVlan	read-only	current	If the value of sleV2QoS4PolicyMatchRedirectVlan is set the value of sleV2QoS4PolicyMatchRedirectPort must be set.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.13	ColumnsleV2QoS4PolicyMatchRedirectPort	read-only	current	If the value of sleV2QoS4PolicyMatchRedirectPort is set the value of sleV2QoS4PolicyMatchRedirectVlan must be set.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.14	ColumnsleV2QoS4PolicyMatchMarkMode	read-only	current	The match mark mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.15	ColumnsleV2QoS4PolicyMatchQueue	read-only	current	The queue value to be apply for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.16	ColumnsleV2QoS4PolicyMatchDp	read-only	current	The drop precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.17	ColumnsleV2QoS4PolicyMatchCoS	read-only	current	The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.18	ColumnsleV2QoS4PolicyMatchDscp	read-only	current	The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.19	ColumnsleV2QoS4PolicyMatchIpPrecedence	read-only	current	The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.20	ColumnsleV2QoS4PolicyMatchDstMacOrEgressPorts	read-only	current	If the value is nothing, sleV2QoS4PolicyMatchDstMac and sleV2QoS4PolicyMatchEgressPorts value is not available If the value is dstMac, the value of sleV2QoS4Po…
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.21	ColumnsleV2QoS4PolicyMatchDstMac	read-only	current	Destination MAC Address of the matched packets The value of 00:00:00:00:00:00 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.22	ColumnsleV2QoS4PolicyMatchEgressPorts	read-only	current	The egress port map of the matched packets
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.23	ColumnsleV2QoS4PolicyNomatchFlag	read-only	current	The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to…
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.24	ColumnsleV2QoS4PolicyNomatchRedirectPort	read-only	current	The port to redirect to a nomatched packet. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.25	ColumnsleV2QoS4PolicyNomatchCoS	read-only	current	The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.26	ColumnsleV2QoS4PolicyNomatchDscp	read-only	current	The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.27	ColumnsleV2QoS4PolicyNomatchIpPrecedence	read-write	current	The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.28	ColumnsleV2QoS4PolicyCounterValue	read-only	current	The value of the counter Packet count or bytes according to policer's counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.29	ColumnsleV2QoS4PolicyCounterGreenBytes	read-only	current	The value of the octet counter for green-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.30	ColumnsleV2QoS4PolicyCounterYellowBytes	read-only	current	The value of the octet counter for yellow-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.31	ColumnsleV2QoS4PolicyCounterRedBytes	read-only	current	The value of the octet counter for red-marked packets. Available only when sleV2QoS4PolicerMeterMode's value is color. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.32	ColumnsleV2QoS4PolicyRedirBlackhole	read-only	current	The packet discard
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.33	ColumnsleV2QoS4PolicyAvrg5SecCounterValue	read-only	current	The value of the average counter of 5 second. The bytes according to policer��s average counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.34	ColumnsleV2QoS4PolicyAvrg1minCounterValue	read-only	current	The value of the average counter of 1 minute. The bytes according to policer��s average counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.35	ColumnsleV2QoS4PolicyAvrg10minCounterValue	read-only	current	The value of the average counter of 10 minute. The bytes according to policer��s average counter mode. The value of 0 is no matched count.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.36	ColumnsleV2QoS4PolicyIngressTunnelIfIndex	read-only	current	Ingress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.37	ColumnsleV2QoS4PolicyEgressTunnelIfIndex	read-only	current	Egress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.38	ColumnsleV2QoS4PolicyCounterElapsedTimeAfterClear	read-only	current	The elapsed time after clearing counter.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.39	ColumnsleV2QoS4PolicyMatchPbrNextHop	read-only	current	The PBR(Policy-Based_routing) nexthop address.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.40	ColumnsleV2QoS4PolicyStage	read-only	current	The rule-policy-stage.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.41	ColumnsleV2QoS4PolicyIngressPortsFlag	read-only	current	The interface-binding ingress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.42	ColumnsleV2QoS4PolicyEgressPortsFlag	read-only	current	The interface-binding egress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.43	ColumnsleV2QoS4PolicyInnerVlanAction	read-only	current	The InnerVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.44	ColumnsleV2QoS4PolicyOuterVlanAction	read-only	current	The OuterVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.45	ColumnsleV2QoS4PolicyInnerVlan	read-only	current	The inner vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.46	ColumnsleV2QoS4PolicyOuterVlan	read-only	current	The outer vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.47	ColumnsleV2QoS4PolicyMatchPbrNextHopSecondary	read-only	current	The PBR(Policy-Based_routing) nexthop secondary address.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.48	ColumnsleV2QoS4PolicyMatchPbrNextHopVerifyReach	read-only	current	The PBR(Policy-Based_routing) Verify-Reachability.
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.49	ColumnsleV2QoS4PolicyMatchFlowAlias	read-only	current	The action match flowAlias
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.50	ColumnsleV2QoS4PolicyMatchInnerVlanCosReplace	read-only	current	The inner vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.51	ColumnsleV2QoS4PolicyMatchInnerVlanCfiReplace	read-only	current	The inner vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.52	ColumnsleV2QoS4PolicyMatchOuterVlanCosReplace	read-only	current	The outer vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.1.1.53	ColumnsleV2QoS4PolicyMatchOuterVlanCfiReplace	read-only	current	The outer vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2	NodesleV2QoS4PolicyControl
1.3.6.1.4.1.6296.102.10.2.5.1.2.1	ScalarsleV2QoS4PolicyControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.2	ScalarsleV2QoS4PolicyControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.3	ScalarsleV2QoS4PolicyControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.4	ScalarsleV2QoS4PolicyControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.5.1.2.5	ScalarsleV2QoS4PolicyControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.5.1.2.6	ScalarsleV2QoS4PolicyControlIndex	read-write	current	The index of policy
1.3.6.1.4.1.6296.102.10.2.5.1.2.7	ScalarsleV2QoS4PolicyControlName	read-write	current	The name of policy
1.3.6.1.4.1.6296.102.10.2.5.1.2.8	ScalarsleV2QoS4PolicyControlPolicerIndex	read-write	current	The index of policer 0: no policer
1.3.6.1.4.1.6296.102.10.2.5.1.2.9	ScalarsleV2QoS4PolicyControlPriority	read-write	current	The priority of the policy low : default
1.3.6.1.4.1.6296.102.10.2.5.1.2.10	ScalarsleV2QoS4PolicyControlIngressPorts	read-write	current	The ingress port map
1.3.6.1.4.1.6296.102.10.2.5.1.2.11	ScalarsleV2QoS4PolicyControlEgressPorts	read-write	current	The egress port map
1.3.6.1.4.1.6296.102.10.2.5.1.2.12	ScalarsleV2QoS4PolicyControlVlan	read-write	current	The index of vlan The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.13	ScalarsleV2QoS4PolicyControlMatchFlag	read-write	current	The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS…
1.3.6.1.4.1.6296.102.10.2.5.1.2.14	ScalarsleV2QoS4PolicyControlMatchVlan	read-write	current	The vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.15	ScalarsleV2QoS4PolicyControlMatchRedirectVlan	read-write	current	The valn id to redirect to a matched packet If the value of sleV2QoS4PolicyMatchRedirectVlan is set the value of sleV2QoS4PolicyMatchRedirectPort must be set. …
1.3.6.1.4.1.6296.102.10.2.5.1.2.16	ScalarsleV2QoS4PolicyControlMatchRedirectPort	read-write	current	The port to redirect to a matched packet. If the value of sleV2QoS4PolicyMatchRedirectPort is set the value of sleV2QoS4PolicyMatchRedirectVlan must be set. Th…
1.3.6.1.4.1.6296.102.10.2.5.1.2.17	ScalarsleV2QoS4PolicyControlMatchMarkMode	read-write	current	The match mark mode The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.18	ScalarsleV2QoS4PolicyControlMatchQueue	read-write	current	The queue value to be apply for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.19	ScalarsleV2QoS4PolicyControlMatchDp	read-write	current	The drop precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.20	ScalarsleV2QoS4PolicyControlMatchCoS	read-write	current	The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.21	ScalarsleV2QoS4PolicyControlMatchDscp	read-write	current	The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.22	ScalarsleV2QoS4PolicyControlMatchIpPrecedence	read-write	current	The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.23	ScalarsleV2QoS4PolicyControlMatchDstMacOrEgressPorts	read-write	current	If the value is nothing, sleV2QoS4PolicyControlMatchDstMac and sleV2QoS4PolicyControlMatchEgressPorts value is not available If the value is dstMac, the value …
1.3.6.1.4.1.6296.102.10.2.5.1.2.24	ScalarsleV2QoS4PolicyControlMatchDstMac	read-write	current	Destination MAC Address of the matched packets The value of 00:00:00:00:00:00 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.25	ScalarsleV2QoS4PolicyControlMatchEgressPorts	read-write	current	The egress port map of the matched packets
1.3.6.1.4.1.6296.102.10.2.5.1.2.26	ScalarsleV2QoS4PolicyControlNomatchFlag	read-write	current	The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to…
1.3.6.1.4.1.6296.102.10.2.5.1.2.27	ScalarsleV2QoS4PolicyControlNomatchRedirectPort	read-write	current	The port to redirect to a nomatched packet. The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.28	ScalarsleV2QoS4PolicyControlNomatchCoS	read-write	current	The Class of Service The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.29	ScalarsleV2QoS4PolicyControlNomatchDscp	read-write	current	The DSCP The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.30	ScalarsleV2QoS4PolicyControlNomatchIpPrecedence	read-write	current	The IP precedence The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.31	ScalarsleV2QoS4PolicyControlMatchRedirBlackhole	read-write	current	The packet discard
1.3.6.1.4.1.6296.102.10.2.5.1.2.32	ScalarsleV2QoS4PolicyControlIngressTunnelIfIndex	read-write	current	Ingress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.2.33	ScalarsleV2Qo4SPolicyControlEgressTunnelIfIndex	read-write	current	Egress tunnel interface index.
1.3.6.1.4.1.6296.102.10.2.5.1.2.34	ScalarsleV2QoS4PolicyControlMatchPbrNextHop	read-write	current	The PBR(Policy-Based_routing) nexthop address.
1.3.6.1.4.1.6296.102.10.2.5.1.2.35	ScalarsleV2QoS4PolicyControlStage	read-write	current	The rule-policy-stage.
1.3.6.1.4.1.6296.102.10.2.5.1.2.36	ScalarsleV2QoS4PolicyControlIngressPortsFlag	read-write	current	The interface-binding ingress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.2.37	ScalarsleV2QoS4PolicyControlEgressPortsFlag	read-write	current	The interface-binding egress-port flag of policy.
1.3.6.1.4.1.6296.102.10.2.5.1.2.38	ScalarsleV2QoS4PolicyControlInnerVlanAction	read-write	current	The InnerVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.39	ScalarsleV2QoS4PolicyControlOuterVlanAction	read-write	current	The OuterVlan Action Mode The Value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.40	ScalarsleV2QoS4PolicyControlInnerVlan	read-write	current	The inner vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.41	ScalarsleV2QoS4PolicyControlOuterVlan	read-write	current	The outer vlan id to be assigned for the matched packets The value of -1 is nothing(not set)
1.3.6.1.4.1.6296.102.10.2.5.1.2.42	ScalarsleV2QoS4PolicyControlMatchPbrNextHopSecondary	read-write	current	The PBR(Policy-Based_routing) nexthop secondary address.
1.3.6.1.4.1.6296.102.10.2.5.1.2.43	ScalarsleV2QoS4PolicyControlMatchPbrNextHopVerifyReach	read-write	current	The PBR(Policy-Based_routing) Verify-Reachability.
1.3.6.1.4.1.6296.102.10.2.5.1.2.44	ScalarsleV2QoS4PolicyControlMatchFlowAlias	read-only	current	The action match flowAlias
1.3.6.1.4.1.6296.102.10.2.5.1.2.45	ScalarsleV2QoS4PolicyControlMatchInnerVlanCosReplace	read-write	current	The inner vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2.46	ScalarsleV2QoS4PolicyControlMatchInnerVlanCfiReplace	read-write	current	The inner vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2.47	ScalarsleV2QoS4PolicyControlMatchOuterVlanCosReplace	read-write	current	The outer vlan COS replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.2.48	ScalarsleV2QoS4PolicyControlMatchOuterVlanCfiReplace	read-write	current	The outer vlan CFI replace (-1: delete)
1.3.6.1.4.1.6296.102.10.2.5.1.3	NodesleV2QoSPolicyNotification
1.3.6.1.4.1.6296.102.10.2.5.1.3.1	NotificationslePolicyCreated		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.2	NotificationslePolicyInfoChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.3	NotificationslePolicyMatchActionChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.4	NotificationslePolicyNomatchActionChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.5	NotificationslePolicyDestroyed		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.6	NotificationslePolicyCounterCleared		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.7	NotificationslePolicyEmptyCreated		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.8	NotificationslePolicyIngressTunnelSet		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.9	NotificationslePolicyIngressTunnelUnset		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.10	NotificationslePolicyEgressTunnelSet		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.11	NotificationslePolicyEgressTunnelUnset		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.1.3.12	NotificationslePolicyActionMatchFlowAliasChanged		current	setMatchActionFlowAlias
1.3.6.1.4.1.6296.102.10.2.5.1.3.13	NotificationslePolicyMatchInnerVlanCosReplaceChanged		current	setMatchInnerVlanCosReplace
1.3.6.1.4.1.6296.102.10.2.5.1.3.14	NotificationslePolicyMatchInnerVlanCfiReplaceChanged		current	setMatchInnerVlanCfiReplace
1.3.6.1.4.1.6296.102.10.2.5.1.3.15	NotificationslePolicyMatchOuterVlanCosReplaceChanged		current	setMatchOuterVlanCosReplace
1.3.6.1.4.1.6296.102.10.2.5.1.3.16	NotificationslePolicyMatchOuterVlanCfiReplaceChanged		current	setMatchOuterVlanCfiReplace
1.3.6.1.4.1.6296.102.10.2.5.2	NodesleV2QoS4PolicyFlowClass
1.3.6.1.4.1.6296.102.10.2.5.2.1	TablesleV2QoS4PolicyFlowClassTable	not-accessible	current	flow class table.
1.3.6.1.4.1.6296.102.10.2.5.2.1.1	RowsleV2QoS4PolicyFlowClassEntry	not-accessible	current	key: sleV2QoS4PolicyIndex, sleV2QoS4PolicyFlowClassIndex
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.1	ColumnsleV2QoS4PolicyFlowClassIndex	read-only	current	The index of flow or class in policy
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.2	ColumnsleV2QoS4PolicyFlowClassType	read-only	current	The flag about flow or class
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.3	ColumnsleV2QoS4PolicyFlowClassID	read-only	current	The identifier of class or flow
1.3.6.1.4.1.6296.102.10.2.5.2.1.1.4	ColumnsleV2QoS4PolicyFlowClassName	read-only	current	The name of class or flow
1.3.6.1.4.1.6296.102.10.2.5.2.2	NodesleV2QoS4PolicyFlowClassControl
1.3.6.1.4.1.6296.102.10.2.5.2.2.1	ScalarsleV2QoS4PolicyFlowClassControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.2	ScalarsleV2QoS4PolicyFlowClassControlStatus	read-write	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.3	ScalarsleV2QoS4PolicyFlowClassControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.4	ScalarsleV2QoS4PolicyFlowClassControlTimeStamp	read-write	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.5.2.2.5	ScalarsleV2QoS4PolicyFlowClassControlReqResult	read-write	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.5.2.2.6	ScalarsleV2QoS4PolicyFlowClassControlPolicyIndex	read-write	current	The index of Policy
1.3.6.1.4.1.6296.102.10.2.5.2.2.7	ScalarsleV2QoS4PolicyFlowClassControlIndex	read-write	current	The index of flow or class in this policy
1.3.6.1.4.1.6296.102.10.2.5.2.2.8	ScalarsleV2QoS4PolicyFlowClassControlType	read-write	current	The type of flow or class
1.3.6.1.4.1.6296.102.10.2.5.2.2.9	ScalarsleV2QoS4PolicyFlowClassControlFlowID	read-write	current	The index of flow Available according to sleV2QoS4PolicyFlowClassControlType.
1.3.6.1.4.1.6296.102.10.2.5.2.2.10	ScalarsleV2QoS4PolicyFlowClassControlClassID	read-write	current	The index of class Available according to sleV2QoS4PolicyFlowClassControlType.
1.3.6.1.4.1.6296.102.10.2.5.2.3	NodesleV2QoS4PolicyFlowClassNotification
1.3.6.1.4.1.6296.102.10.2.5.2.3.1	NotificationslePolicyFlowAdded		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.2	NotificationslePolicyFlowDeleted		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.3	NotificationslePolicyAllFlowDeleted		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.4	NotificationslePolicyAllClassDeleted		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.2.3.5	NotificationslePolicyAllFlowClassDeleted		current	Description.
1.3.6.1.4.1.6296.102.10.2.5.3	NodesleV2QoS4PolicyIF
1.3.6.1.4.1.6296.102.10.2.5.3.1	TablesleV2QoS4PolicyIFTable	not-accessible	current	Description.
1.3.6.1.4.1.6296.102.10.2.5.3.1.1	RowsleV2QoS4PolicyIFEntry	not-accessible	current	Description.
1.3.6.1.4.1.6296.102.10.2.5.3.1.1.1	ColumnsleV2QoS4PolicyIFDirection	read-only	current	Packet input/output direction
1.3.6.1.4.1.6296.102.10.2.5.3.2	NodesleV2QoS4PolicyIFControl
1.3.6.1.4.1.6296.102.10.2.5.3.2.1	ScalarsleV2QoS4PolicyIFControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.2	ScalarsleV2QoS4PolicyIFControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.3	ScalarsleV2QoS4PolicyIFControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.4	ScalarsleV2QoS4PolicyIFControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.5.3.2.5	ScalarsleV2QoS4PolicyIFControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.5.3.2.6	ScalarsleV2QoS4PolicyIFControlIfindex	read-write	current	The interface index.
1.3.6.1.4.1.6296.102.10.2.5.3.2.7	ScalarsleV2QoS4PolicyIFControlPolicyIndex	read-write	current	The Policy index.
1.3.6.1.4.1.6296.102.10.2.5.3.2.8	ScalarsleV2QoS4PolicyIFControlDirection	read-write	current	Packet input/output direction
1.3.6.1.4.1.6296.102.10.2.5.3.3	NodesleV2QoS4PolicyIFNotification
1.3.6.1.4.1.6296.102.10.2.5.3.3.1	NotificationsleV2QosPolicyIFServicePolicyChanged		current	setServicePolicy
1.3.6.1.4.1.6296.102.10.2.5.3.3.2	NotificationsleV2QosPolicyIFServicePolicyCleared		current	setServicePolicy
1.3.6.1.4.1.6296.102.10.2.6	NodesleV2QoS4Remark
1.3.6.1.4.1.6296.102.10.2.6.1	NodesleV2QoS4RemarkBase
1.3.6.1.4.1.6296.102.10.2.6.1.1	NodesleV2QoS4RemarkInfo
1.3.6.1.4.1.6296.102.10.2.6.1.1.1	ScalarsleV2QoS4RemarkLayer2Mode	read-only	current	The layer2 remark mode 1 : remark based on queue (default) 2 : remark based on 802.1p priority
1.3.6.1.4.1.6296.102.10.2.6.1.1.2	ScalarsleV2QoS4RemarkMode	read-only	current	The remark mode 0 : enable 801.1p-remark for IP packets 1 : enable 801.1p-remark for Non-IP packets
1.3.6.1.4.1.6296.102.10.2.6.1.2	NodesleV2QoS4RemarkControl
1.3.6.1.4.1.6296.102.10.2.6.1.2.1	ScalarsleV2QoS4RemarkControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.2	ScalarsleV2QoS4RemarkControlStatus	read-write	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.3	ScalarsleV2QoS4RemarkControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.4	ScalarsleV2QoS4RemarkControlTimStamp	read-write	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.6.1.2.5	ScalarsleV2QoS4RemarkControlReqResult	read-write	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.6.1.2.6	ScalarsleV2QoS4RemarkControlLayer2Mode	read-write	current	The layer2 remark mode -1: default (remarkByQueue) 1 : remark by queue 2 : remark by priority
1.3.6.1.4.1.6296.102.10.2.6.1.2.7	ScalarsleV2QoS4RemarkControlMode	read-write	current	The remark mode 0 : enable 801.1p-remark for IP packets 1 : enable 801.1p-remark for Non-IP packets
1.3.6.1.4.1.6296.102.10.2.6.1.3	NodesleV2QoS4RemarkNotification
1.3.6.1.4.1.6296.102.10.2.6.1.3.1	NotificationsleRemarkChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.6.2	NodesleV2QoS4RemarkL3
1.3.6.1.4.1.6296.102.10.2.6.2.1	TablesleV2QoS4RemarkL3Table	not-accessible	current	remark L3 table.
1.3.6.1.4.1.6296.102.10.2.6.2.1.1	RowsleV2QoS4RemarkL3Entry	not-accessible	current	key: sleV2QoS4RemarkL3ColorIndex, sleV2QoS4RemarkL3DSCPIndex
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.1	ColumnsleV2QoS4RemarkL3ColorIndex	read-only	current	The index of color
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.2	ColumnsleV2QoS4RemarkL3DSCPIndex	read-only	current	The index of DSCP The index value of 1~ 64 mean 0 ~ 63 of the DSCP
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.3	ColumnsleV2QoS4RemarkL3Queue	read-only	current	This is remarking to queue by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.4	ColumnsleV2QoS4RemarkL3Dp	read-only	current	This is remarking to drop precednece by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.5	ColumnsleV2QoS4RemarkL3CoS	read-only	current	This is remarking to CoS by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.1.1.6	ColumnsleV2QoS4RemarkL3Dscp	read-only	current	This is remarking to DSCP by Color and DSCP 0 : default
1.3.6.1.4.1.6296.102.10.2.6.2.2	NodesleV2QoS4RemarkL3Control
1.3.6.1.4.1.6296.102.10.2.6.2.2.1	ScalarsleV2QoS4RemarkL3ControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.2	ScalarsleV2QoS4RemarkL3ControlStatus	read-write	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.3	ScalarsleV2QoS4RemarkL3ControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.4	ScalarsleV2QoS4RemarkL3ControlTimeStamp	read-write	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.6.2.2.5	ScalarsleV2QoS4RemarkL3ControlReqResult	read-write	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.6.2.2.6	ScalarsleV2QoS4RemarkL3ControlColorIndex	read-write	current	The index of color marking
1.3.6.1.4.1.6296.102.10.2.6.2.2.7	ScalarsleV2QoS4RemarkL3ControlDSCPIndex	read-write	current	The index of DSCP The index value of 1~ 64 mean 0 ~ 63 of the DSCP
1.3.6.1.4.1.6296.102.10.2.6.2.2.8	ScalarsleV2QoS4RemarkL3ControlQueue	read-write	current	This is remarking to queue by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.2.9	ScalarsleV2QoS4RemarkL3ControlDp	read-write	current	This is remarking to drop precednece by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.2.10	ScalarsleV2QoS4RemarkL3ControlCoS	read-write	current	This is remarking to CoS by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.2.11	ScalarsleV2QoS4RemarkL3ControlDscp	read-write	current	This is remarking to DSCP by Color and DSCP The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.2.3	NodesleV2QoS4RemarkL3Notification
1.3.6.1.4.1.6296.102.10.2.6.2.3.1	NotificationsleRemarkL3Changed		current	Description.
1.3.6.1.4.1.6296.102.10.2.6.3	NodesleV2QoS4RemarkL2
1.3.6.1.4.1.6296.102.10.2.6.3.1	TablesleV2QoS4RemarkL2Table	not-accessible	current	remark L2 table.
1.3.6.1.4.1.6296.102.10.2.6.3.1.1	RowsleV2QoS4RemarkL2Entry	not-accessible	current	key: sleV2QoS4RemarkL2ColorIndex, sleV2QoS4RemarkL2QueueCoSIndex
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.1	ColumnsleV2QoS4RemarkL2ColorIndex	read-only	current	The index of color marking
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.2	ColumnsleV2QoS4RemarkL2QueueCoSIndex	read-only	current	The index of queue or CoS The index value of 1~ 8 mean 0 ~ 7 of the queue and CoS Refer to sleV2QoS4RemarkLayer2Mode
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.3	ColumnsleV2QoS4RemarkL2Queue	read-only	current	This is remarking to queue by Color and L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.4	ColumnsleV2QoS4RemarkL2Dp	read-only	current	This is remarking to drop precednece by L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.5	ColumnsleV2QoS4RemarkL2CoS	read-only	current	This is remarking to CoS by Color and L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.1.1.6	ColumnsleV2QoS4RemarkL2Dscp	read-only	current	This is remarking to DSCP by Color and L2(queue or CoS) 0 : default
1.3.6.1.4.1.6296.102.10.2.6.3.2	NodesleV2QoS4RemarkL2Control
1.3.6.1.4.1.6296.102.10.2.6.3.2.1	ScalarsleV2QoS4RemarkL2ControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.2	ScalarsleV2QoS4RemarkL2ControlStatus	read-write	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.3	ScalarsleV2QoS4RemarkL2ControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.4	ScalarsleV2QoS4RemarkL2ControlTimeStamp	read-write	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.6.3.2.5	ScalarsleV2QoS4RemarkL2ControlReqResult	read-write	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.6.3.2.6	ScalarsleV2QoS4RemarkL2ControlColorIndex	read-write	current	The index of color marking
1.3.6.1.4.1.6296.102.10.2.6.3.2.7	ScalarsleV2QoS4RemarkL2ControlQueueCoSIndex	read-write	current	The index of queue or CoS The index value of 1~ 8 mean 0 ~ 7 of the queue and CoS Refer to sleV2QoS4RemarkLayer2Mod
1.3.6.1.4.1.6296.102.10.2.6.3.2.8	ScalarsleV2QoS4RemarkL2ControlQueue	read-write	current	This is remarking to queue by Color and L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.2.9	ScalarsleV2QoS4RemarkL2ControlDp	read-write	current	This is remarking to drop precednece by L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.2.10	ScalarsleV2QoS4RemarkL2ControlCoS	read-write	current	This is remarking to CoS by Color and L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.2.11	ScalarsleV2QoS4RemarkL2ControlDscp	read-write	current	This is remarking to DSCP by Color and L2(queue or CoS) The value of -1 means nothing(not set)
1.3.6.1.4.1.6296.102.10.2.6.3.3	NodesleV2QoS4RemarkL2Notification
1.3.6.1.4.1.6296.102.10.2.6.3.3.1	NotificationsleRemarkL2Changed		current	Description.
1.3.6.1.4.1.6296.102.10.2.7	NodesleV2QoS4RED
1.3.6.1.4.1.6296.102.10.2.7.1	NodesleV2QoS4REDProfile
1.3.6.1.4.1.6296.102.10.2.7.1.1	TablesleV2QoS4REDProfileTable	not-accessible	current	redundancy profile table.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1	RowsleV2QoS4REDProfileEntry	not-accessible	current	key: sleV2QoS4REDProfileId, sleV2QoS4REDProfileQueueId
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.1	ColumnsleV2QoS4REDProfileId	read-only	current	The index of RED profile. Marvell : (1..4), BCM : number of ports.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.2	ColumnsleV2QoS4REDProfileQueueId	read-only	current	The index of queue.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.3	ColumnsleV2QoS4REDProfileDp0MinThres	read-only	current	DP0 min threshold. In case RED, used as RED min threshold. Marvell : (1..65535), BCM : (0..127)
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.4	ColumnsleV2QoS4REDProfileDp0MaxThres	read-only	current	DP0 max threshold. Used only in case WRED. Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.5	ColumnsleV2QoS4REDProfileDp0Prob	read-only	current	DP0 drop probability. In case RED, used as RED prob
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.6	ColumnsleV2QoS4REDProfileDp1MinThres	read-only	current	DP1 min threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.7	ColumnsleV2QoS4REDProfileDp1MaxThres	read-only	current	DP1 max threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.8	ColumnsleV2QoS4REDProfileDp1Prob	read-only	current	DP1 drop probability.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.9	ColumnsleV2QoS4REDProfileDp2MinThres	read-only	current	DP2 min threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.10	ColumnsleV2QoS4REDProfileDp2MaxThres	read-only	current	DP2 max threshold. Used only in case WRED Marvell : (1..65535), BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.11	ColumnsleV2QoS4REDProfileDp2Prob	read-only	current	DP2 drop probability.
1.3.6.1.4.1.6296.102.10.2.7.1.1.1.12	ColumnsleV2QoS4REDProfileWeight	read-only	current	Drop weight, Used only in case WRED. BCM : not supported.
1.3.6.1.4.1.6296.102.10.2.7.1.2	NodesleV2QoS4REDProfileControl
1.3.6.1.4.1.6296.102.10.2.7.1.2.1	ScalarsleV2QoS4REDProfileControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.2	ScalarsleV2QoS4REDProfileControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.3	ScalarsleV2QoS4REDProfileControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.4	ScalarsleV2QoS4REDProfileControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.7.1.2.5	ScalarsleV2QoS4REDProfileControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.7.1.2.6	ScalarsleV2QoS4REDProfileControlId	read-write	current	The index of RED profile. Marvell (1..4), BCM : number of ports
1.3.6.1.4.1.6296.102.10.2.7.1.2.7	ScalarsleV2QoS4REDProfileControlQueueId	read-write	current	The index of queues
1.3.6.1.4.1.6296.102.10.2.7.1.2.8	ScalarsleV2QoS4REDProfileControlDp0MinThres	read-write	current	DP0 min threshold. In case RED, used as RED min threshold. Marvell (1..65535), BCM (0..127)
1.3.6.1.4.1.6296.102.10.2.7.1.2.9	ScalarsleV2QoS4REDProfileControlDp0MaxThres	read-write	current	DP0 max threshold. Used only in case WRED. Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.10	ScalarsleV2QoS4REDProfileControlDp0Prob	read-write	current	DP0 Drop Probability In case RED, used as RED prob.
1.3.6.1.4.1.6296.102.10.2.7.1.2.11	ScalarsleV2QoS4REDProfileControlDp1MinThres	read-write	current	DP1 min threshold. Used only in case WRED. Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.12	ScalarsleV2QoS4REDProfileControlDp1MaxThres	read-write	current	DP1 max threshold. Used only in case WRED Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.13	ScalarsleV2QoS4REDProfileControlDp1Prob	read-write	current	DP1 Drop Probability. Used only in case WRED. BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.14	ScalarsleV2QoS4REDProfileControlDp2MinThres	read-write	current	DP2 min threshold. Used only in case WRED Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.15	ScalarsleV2QoS4REDProfileControlDp2MaxThres	read-write	current	DP2 max threshold. Marvell (1..65535), BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.16	ScalarsleV2QoS4REDProfileControlDp2Prob	read-write	current	DP2 Drop Probability. Used only in case WRED. BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.2.17	ScalarsleV2QoS4REDProfileControlWeight	read-write	current	Drop weight. Used only in case WRED. BCM: not supported
1.3.6.1.4.1.6296.102.10.2.7.1.3	NodesleV2QoS4REDProfileNotification
1.3.6.1.4.1.6296.102.10.2.7.1.3.1	NotificationsleV2QS4REDProfileChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.7.1.3.2	NotificationsleV2QS4REDProfileCleared		current	Description.
1.3.6.1.4.1.6296.102.10.2.7.2	NodesleV2QoS4PortREDInfo
1.3.6.1.4.1.6296.102.10.2.7.2.1	TablesleV2QoS4PortREDInfoTable	not-accessible	current	port redundancy info table.
1.3.6.1.4.1.6296.102.10.2.7.2.1.1	RowsleV2QoS4PortREDInfoEntry	not-accessible	current	key: sleV2QoS4PortREDInfoInterfaceIndex
1.3.6.1.4.1.6296.102.10.2.7.2.1.1.1	ColumnsleV2QoS4PortREDInfoInterfaceIndex	read-only	current	Inrterface Index
1.3.6.1.4.1.6296.102.10.2.7.2.1.1.2	ColumnsleV2QoS4PortREDInfoEnable	read-only	current	RED/WRED enable flag BCM: only available RED, Marvell: only available WRED
1.3.6.1.4.1.6296.102.10.2.7.2.1.1.3	ColumnsleV2QoS4PortREDInfoProfileId	read-only	current	RED profile index. In case sleV2QoS4PortREDInfoEnable == disable, invalid Marvell : (1..4), BCM : number of ports In case BCM, this value is equal to port inde…
1.3.6.1.4.1.6296.102.10.2.7.2.2	NodesleV2QoS4PortREDInfoControl
1.3.6.1.4.1.6296.102.10.2.7.2.2.1	ScalarsleV2QoS4PortREDInfoControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.2	ScalarsleV2QoS4PortREDInfoControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.3	ScalarsleV2QoS4PortREDInfoControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.4	ScalarsleV2QoS4PortREDInfoControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.7.2.2.5	ScalarsleV2QoS4PortREDInfoControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.7.2.2.6	ScalarsleV2QoS4PortREDInfoControlInterfaceIndex	read-write	current	Inrterface Index
1.3.6.1.4.1.6296.102.10.2.7.2.2.7	ScalarsleV2QoS4PortREDInfoControlEnable	read-write	current	RED/WRED enable flag
1.3.6.1.4.1.6296.102.10.2.7.2.2.8	ScalarsleV2QoS4PortREDInfoControlProfileId	read-write	current	RED profile index. This value is valid only when sleV2QoS4PortREDInfoEnable is equal to RED or WRED only, valid. Marvell : (1..4), BCM : number of ports In cas…
1.3.6.1.4.1.6296.102.10.2.7.2.3	NodesleV2QoS4PortREDInfoNotification
1.3.6.1.4.1.6296.102.10.2.7.2.3.1	NotificationsleV2QoS4PortREDInfoChanged		current	setPortREDInfo
1.3.6.1.4.1.6296.102.10.2.8	NodesleV2QoS4Queue
1.3.6.1.4.1.6296.102.10.2.8.1	NodesleV2QoS4QueueInfo
1.3.6.1.4.1.6296.102.10.2.8.1.1	TablesleV2QoS4QueueInfoTable	not-accessible	current	queue info table.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1	RowsleV2QoS4QueueInfoEntry	not-accessible	current	key: sleV2QoS4QueueInfoInterfaceIndex, sleV2QoS4QueueInfoId
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.1	ColumnsleV2QoS4QueueInfoInterfaceIndex	read-only	current	Inrterface Index
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.2	ColumnsleV2QoS4QueueInfoId	read-only	current	The index of queue
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.3	ColumnsleV2QoS4QueueInfoScheduleMode	read-only	current	Schedule mode of queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.4	ColumnsleV2QoS4QueueInfoDWRRGroup	read-only	current	Queue dwrr group
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.5	ColumnsleV2QoS4QueueInfoMinBandwidth	read-only	current	Min bandwidth of queue
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.6	ColumnsleV2QoS4QueueInfoMaxBandwidth	read-only	current	Max bandwidth of queue
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.7	ColumnsleV2QoS4QueueInfoWeight	read-only	current	Weight of queue BCM (1..15), Marvell (6..255)
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.8	ColumnsleV2QoS4QueueMappedCoS	read-only	current	Mapped cos
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.9	ColumnsleV2QoS4QueueInfoBufferEgressMinLimitUnicast	read-only	current	Buffer Egress Min Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.10	ColumnsleV2QoS4QueueInfoBufferEgressMaxLimitPolicyUnicast	read-only	current	Policy to Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.11	ColumnsleV2QoS4QueueInfoBufferEgressMaxLimitUnicast	read-only	current	Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.12	ColumnsleV2QoS4QueueInfoBufferEgressMinLimitNonUnicast	read-only	current	Buffer Egress Min Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.13	ColumnsleV2QoS4QueueInfoBufferEgressMaxLimitPolicyNonUnicast	read-only	current	Policy to Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.1.1.14	ColumnsleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicast	read-only	current	Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2	NodesleV2QoS4QueueInfoControl
1.3.6.1.4.1.6296.102.10.2.8.1.2.1	ScalarsleV2QoS4QueueInfoControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.2	ScalarsleV2QoS4QueueInfoControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.3	ScalarsleV2QoS4QueueInfoControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.4	ScalarsleV2QoS4QueueInfoControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.8.1.2.5	ScalarsleV2QoS4QueueInfoControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.8.1.2.6	ScalarsleV2QoS4QueueInfoControlInterfaceIndex	read-write	current	Inrterface Index
1.3.6.1.4.1.6296.102.10.2.8.1.2.7	ScalarsleV2QoS4QueueInfoControlId	read-write	current	The index of queue
1.3.6.1.4.1.6296.102.10.2.8.1.2.8	ScalarsleV2QoS4QueueInfoControlScheduleMode	read-write	current	Schedule mode of queue. ( V5524 : sp, wrr, wfq, V5212G : sp, wrr, V5424G : sp, wrr, drr V6424 : sp, dwrr )
1.3.6.1.4.1.6296.102.10.2.8.1.2.9	ScalarsleV2QoS4QueueInfoControlDWRRGroup	read-write	current	Queue dwrr group ( V6424 )
1.3.6.1.4.1.6296.102.10.2.8.1.2.10	ScalarsleV2QoS4QueueInfoControlMinBandwidth	read-write	current	Min bandwidth of queue. ( V5524 : wfq, V5424G : drr, V6424 : dwrr )
1.3.6.1.4.1.6296.102.10.2.8.1.2.11	ScalarsleV2QoS4QueueInfoControlMaxBandwidth	read-write	current	Max bandwidth of queue
1.3.6.1.4.1.6296.102.10.2.8.1.2.12	ScalarsleV2QoS4QueueInfoControlWeight	read-write	current	Weight of queue BCM (1..15), Marvell (6..255) ( V5524, V5212G, V5424G : wrr, V6424 : dwrr )
1.3.6.1.4.1.6296.102.10.2.8.1.2.13	ScalarsleV2QoS4QueueInfoControlMappedCoS	read-write	current	Mapped cos
1.3.6.1.4.1.6296.102.10.2.8.1.2.14	ScalarsleV2QoS4QueueInfoControlBufferEgressMinLimitUnicast	read-write	current	Buffer Egress Min Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.15	ScalarsleV2QoS4QueueInfoControlBufferEgressMaxLimitPolicyUnicast	read-write	current	Policy to Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.16	ScalarsleV2QoS4QueueInfoControlBufferEgressMaxLimitUnicast	read-write	current	Buffer Egress Max Limit for unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.17	ScalarsleV2QoS4QueueInfoControlBufferEgressMinLimitNonUnicast	read-write	current	Buffer Egress Min Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.18	ScalarsleV2QoS4QueueInfoControlBufferEgressMaxLimitPolicyNonUnicast	read-write	current	Policy to Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.2.19	ScalarsleV2QoS4QueueInfoControlBufferEgressMaxLimitNonUnicast	read-write	current	Buffer Egress Max Limit for non-unicast Queue.
1.3.6.1.4.1.6296.102.10.2.8.1.3	NodesleV2QoS4QueueInfoNotification
1.3.6.1.4.1.6296.102.10.2.8.1.3.1	NotificationsleV2QoS4QueueInfoChanged		current	setQueueInfo
1.3.6.1.4.1.6296.102.10.2.8.1.3.2	NotificationsleV2QoS4QueueInfoScheduleModeChanged		current	setScheduleMode
1.3.6.1.4.1.6296.102.10.2.8.1.3.3	NotificationsleV2QoS4QueueInfoMaxBandwidthChanged		current	setMaxBandwidth
1.3.6.1.4.1.6296.102.10.2.8.1.3.4	NotificationsleV2QoS4QueueInfoMinBandwidthChanged		current	setMinBandwidth
1.3.6.1.4.1.6296.102.10.2.8.1.3.5	NotificationsleV2QoS4QueueInfoWeightChanged		current	setWeight
1.3.6.1.4.1.6296.102.10.2.8.1.3.6	NotificationsleV2QoS4QueueInfoBufferEgressMinLimitUnicastChanged		current	setBufferEgressMinLimitUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.7	NotificationsleV2QoS4QueueInfoBufferEgressMinLimitUnicastCleared		current	Description.
1.3.6.1.4.1.6296.102.10.2.8.1.3.8	NotificationsleV2QoS4QueueInfoBufferEgressMaxLimitUnicastChanged		current	setBufferEgressMaxLimitUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.9	NotificationsleV2QoS4QueueInfoBufferEgressMaxLimitUnicastCleared		current	clearBufferEgressMaxLimitUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.10	NotificationsleV2QoS4QueueInfoBufferEgressMinLimitNonUnicastChanged		current	setBufferEgressMinLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.11	NotificationsleV2QoS4QueueInfoBufferEgressMinLimitNonUnicastCleared		current	clearBufferEgressMinLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.12	NotificationsleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicastChanged		current	setBufferEgressMaxLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.8.1.3.13	NotificationsleV2QoS4QueueInfoBufferEgressMaxLimitNonUnicastCleared		current	clearBufferEgressMaxLimitNonUnicast
1.3.6.1.4.1.6296.102.10.2.9	NodesleV2QoS4DscpMap
1.3.6.1.4.1.6296.102.10.2.9.1	NodesleV2QoS4DscpMapIngress
1.3.6.1.4.1.6296.102.10.2.9.1.1	TablesleV2QoS4DscpMapIngressTable	not-accessible	current	DSCP map ingress table.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1	RowsleV2QoS4DscpMapIngressEntry	not-accessible	current	key: sleV2QoS4DscpMapIngressDscpIndex
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.1	ColumnsleV2QoS4DscpMapIngressDscpIndex	read-only	current	Ingress DSCP mapping index. The index value of 1~ 64 mean 0 ~ 63 of the DSCP.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.2	ColumnsleV2QoS4DscpMapIngressDscp	read-only	current	DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.3	ColumnsleV2QoS4DscpMapIngressCos	read-only	current	The Class of Service.
1.3.6.1.4.1.6296.102.10.2.9.1.1.1.4	ColumnsleV2QoS4DscpMapIngressColor	read-only	current	Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.1.2	NodesleV2QoS4DscpMapIngressControl
1.3.6.1.4.1.6296.102.10.2.9.1.2.1	ScalarsleV2QoS4DscpMapIngressControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.2	ScalarsleV2QoS4DscpMapIngressControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.3	ScalarsleV2QoS4DscpMapIngressControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.4	ScalarsleV2QoS4DscpMapIngressControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.9.1.2.5	ScalarsleV2QoS4DscpMapIngressControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.9.1.2.6	ScalarsleV2QoS4DscpMapIngressControlDscpIndex	read-write	current	Ingress DSCP mapping index. The index value of 1~ 64 mean 0 ~ 63 of the DSCP.
1.3.6.1.4.1.6296.102.10.2.9.1.2.7	ScalarsleV2QoS4DscpMapIngressControlDscp	read-write	current	DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.1.2.8	ScalarsleV2QoS4DscpMapIngressControlCos	read-write	current	The Class of Service.
1.3.6.1.4.1.6296.102.10.2.9.1.2.9	ScalarsleV2QoS4DscpMapIngressControlColor	read-write	current	Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.1.3	NodesleV2QoS4DscpMapIngressNotification
1.3.6.1.4.1.6296.102.10.2.9.1.3.1	NotificationsleV2QoS4DscpMapIngressChanged		current	Description.
1.3.6.1.4.1.6296.102.10.2.9.2	NodesleV2QoS4DscpMapTunnel
1.3.6.1.4.1.6296.102.10.2.9.2.1	TablesleV2QoS4DscpMapTunnelTable	not-accessible	current	DSCP map tunnel table.
1.3.6.1.4.1.6296.102.10.2.9.2.1.1	RowsleV2QoS4DscpMapTunnelEntry	not-accessible	current	key: sleV2QoS4DscpMapTunnelPriority, sleV2QoS4DscpMapTunnelColor
1.3.6.1.4.1.6296.102.10.2.9.2.1.1.1	ColumnsleV2QoS4DscpMapTunnelPriority	read-only	current	Internal packet priority. The index value of 1 ~ 8 mean 0 ~ 7 of the priority.
1.3.6.1.4.1.6296.102.10.2.9.2.1.1.2	ColumnsleV2QoS4DscpMapTunnelColor	read-only	current	Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.2.1.1.3	ColumnsleV2QoS4DscpMapTunnelDscp	read-only	current	DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.2.2	NodesleV2QoS4DscpMapTunnelControl
1.3.6.1.4.1.6296.102.10.2.9.2.2.1	ScalarsleV2QoS4DscpMapTunnelControlRequest	read-write	current	The request of a user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.2	ScalarsleV2QoS4DscpMapTunnelControlStatus	read-only	current	The status of user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.3	ScalarsleV2QoS4DscpMapTunnelControlTimer	read-write	current	The maximum time for the manager for a long running user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.4	ScalarsleV2QoS4DscpMapTunnelControlTimeStamp	read-only	current	The time stamp of the last command(end of command)
1.3.6.1.4.1.6296.102.10.2.9.2.2.5	ScalarsleV2QoS4DscpMapTunnelControlReqResult	read-only	current	The result of the last user command
1.3.6.1.4.1.6296.102.10.2.9.2.2.6	ScalarsleV2QoS4DscpMapTunnelControlPriority	read-write	current	Internal packet priority. The index value of 1 ~ 8 mean 0 ~ 7 of the priority.
1.3.6.1.4.1.6296.102.10.2.9.2.2.7	ScalarsleV2QoS4DscpMapTunnelControlColor	read-write	current	Specify color by Internal DP.
1.3.6.1.4.1.6296.102.10.2.9.2.2.8	ScalarsleV2QoS4DscpMapTunnelControlDscp	read-write	current	DSCP value.
1.3.6.1.4.1.6296.102.10.2.9.2.3	NodesleV2QoS4DscpMapTunnelNotification
1.3.6.1.4.1.6296.102.10.2.9.2.3.1	NotificationsleV2QoS4DscpMapTunnelChanged		current	Description.
1.3.6.1.4.1.6296.102.10.3	NodesleV2QoS6
1.3.6.1.4.1.6296.102.10.4	GroupsleV2QoSGroup		current	Description.
1.3.6.1.4.1.6296.102.10.5	GroupsleV2QoSNotificationGroup		current	Description.

Type Definitions

Name	Syntax	Status	Description
MacAddressMask	OCTET STRING (SIZE (6))	current	Represents Mac address Mask.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SLEV2-QOS-MIB