SLEV2-Security-MIB
441 objects
slev2 security
Imported Objects
| DASAN-SMI | sleV2Mgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | BITS Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.102.7 | IdentitysleV2Security | slev2 security | ||
| 1.3.6.1.4.1.6296.102.7.1 | NodesleV2SecurityBase | |||
| 1.3.6.1.4.1.6296.102.7.2 | NodesleVSecurity4 | |||
| 1.3.6.1.4.1.6296.102.7.2.5 | NodesleV2SecurityACL | |||
| 1.3.6.1.4.1.6296.102.7.2.5.1 | NodesleV2Security4ACLBase | |||
| 1.3.6.1.4.1.6296.102.7.2.5.2 | NodesleV2Security4ACLFlow | |||
| 1.3.6.1.4.1.6296.102.7.2.5.2.1 | NodesleV2Security4ACLFlowInfo | |||
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1 | TablesleV2Security4ACLFlowTable | not-accessible | current | ACL flow table. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1 | RowsleV2Security4ACLFlowEntry | not-accessible | current | key: sleV2Security4ACLFlowIndex |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.1 | ColumnsleV2Security4ACLFlowIndex | read-only | current | The index of flow |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.2 | ColumnsleV2Security4ACLFlowName | read-only | current | The name of flow |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.3 | ColumnsleV2Security4ACLFlowSrcIpAddr | read-only | current | The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.4 | ColumnsleV2Security4ACLFlowSrcIpAddrMask | read-only | current | The mask of source IP address The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.5 | ColumnsleV2Security4ACLFlowDstIpAddr | read-only | current | The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.6 | ColumnsleV2Security4ACLFlowDstIpAddrMask | read-only | current | The mask of destination IP address The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.7 | ColumnsleV2Security4ACLFlowProtocolType | read-only | current | The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpS… |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.8 | ColumnsleV2Security4ACLFlowTcpSrcStartPort | read-only | current | The start source port in range of source port in TCP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.9 | ColumnsleV2Security4ACLFlowTcpSrcEndPort | read-only | current | The end source port in range of source port in TCP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.10 | ColumnsleV2Security4ACLFlowTcpDstStartPort | read-only | current | The start destination port in range of source port in TCP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.11 | ColumnsleV2Security4ACLFlowTcpDstEndPort | read-only | current | The end destination port in range of destination port in TCP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.12 | ColumnsleV2Security4ACLFlowTcpFlag | read-only | current | The flag in TCP packet |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.13 | ColumnsleV2Security4ACLFlowUdpSrcStartPort | read-only | current | The start source port in range of source port in UDP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.14 | ColumnsleV2Security4ACLFlowUdpSrcEndPort | read-only | current | The end source port in range of source port in UDP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.15 | ColumnsleV2Security4ACLFlowUdpDstStartPort | read-only | current | The start destination port in range of destination port in UDP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.16 | ColumnsleV2Security4ACLFlowUdpDstEndPort | read-only | current | The end destination port in range of destination port in UDP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.17 | ColumnsleV2Security4ACLFlowIcmpType | read-only | current | The type of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.18 | ColumnsleV2Security4ACLFlowIcmpCode | read-only | current | The code of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.19 | ColumnsleV2Security4ACLFlowHdrlen | read-only | current | The IP header length. The value of 0 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.20 | ColumnsleV2Security4ACLFlowIpFlag | read-only | current | The any flag of IP address. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.21 | ColumnsleV2SecurityACLFlowInetAddrType | read-only | current | IP address type |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.22 | ColumnsleV2SecurityACLFlowSrcInetAddr | read-only | current | The IP address to match against the packet��s source IP address. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.23 | ColumnsleV2SecurityACLFlowDstInetAddr | read-only | current | The IP address to match against the packet��s destination IP address. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.24 | ColumnsleV2SecurityACLFlowSrcInetAddrLen | read-only | current | The prefix length of source IP address |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.25 | ColumnsleV2SecurityACLFlowDstInetAddrLen | read-only | current | The prefix length of destination IP address |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2 | NodesleV2Security4ACLFlowControl | |||
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.1 | ScalarsleV2Security4ACLFlowControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.2 | ScalarsleV2Security4ACLFlowControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.3 | ScalarsleV2Security4ACLFlowControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.4 | ScalarsleV2Security4ACLFlowControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.5 | ScalarsleV2Security4ACLFlowControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.6 | ScalarsleV2Security4ACLFlowControlIndex | read-write | current | The index of flow |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.7 | ScalarsleV2Security4ACLFlowControlName | read-write | current | The name of flow |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.8 | ScalarsleV2Security4ACLFlowControlSrcIpAddr | read-write | current | The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.9 | ScalarsleV2Security4ACLFlowControlSrcIpAddrMask | read-write | current | The mask of source IP address The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.10 | ScalarsleV2Security4ACLFlowControlDstIpAddr | read-write | current | The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.11 | ScalarsleV2Security4ACLFlowControlDstIpAddrMask | read-write | current | The mask of destination IP address The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.12 | ScalarsleV2Security4ACLFlowControlProtocolType | read-write | current | The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowCont… |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.13 | ScalarsleV2Security4ACLFlowControlTcpSrcStartPort | read-write | current | The start source port in range of source port in TCP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.14 | ScalarsleV2Security4ACLFlowControlTcpSrcEndPort | read-write | current | The end source port in range of source port in TCP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.15 | ScalarsleV2Security4ACLFlowControlTcpDstStartPort | read-write | current | The start destination port in range of source port in TCP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.16 | ScalarsleV2Security4ACLFlowControlTcpDstEndPort | read-write | current | The end destination port in range of destination port in TCP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.17 | ScalarsleV2Security4ACLFlowControlTcpFlag | read-write | current | The flag in TCP packet |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.18 | ScalarsleV2Security4ACLFlowControlUdpSrcStartPort | read-write | current | The start source port in range of source port in UDP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.19 | ScalarsleV2Security4ACLFlowControlUdpSrcEndPort | read-write | current | The end source port in range of source port in UDP packet The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.20 | ScalarsleV2Security4ACLFlowControlUdpDstStartPort | read-write | current | The start destination port in range of destination port in UDP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.21 | ScalarsleV2Security4ACLFlowControlUdpDstEndPort | read-write | current | The end destination port in range of destination port in UDP packet. The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.22 | ScalarsleV2Security4ACLFlowControlIcmpType | read-write | current | The type of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.23 | ScalarsleV2Security4ACLFlowControlIcmpCode | read-write | current | The code of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.24 | ScalarsleV2Security4ACLFlowControlHdrlen | read-write | current | The IP header length The value of 0 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.25 | ScalarsleV2Security4ACLFlowControlIpFlag | read-write | current | The any flag of IP address. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.26 | ScalarsleV2SecurityACLFlowControlInetAddrType | read-write | current | IP address type |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.27 | ScalarsleV2SecurityACLFlowControlSrcInetAddr | read-write | current | The IP address to match against the packet��s source IP address. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.28 | ScalarsleV2SecurityACLFlowControlDstInetAddr | read-write | current | The IP address to match against the packet��s destination IP address. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.29 | ScalarsleV2SecurityACLFlowControlSrcInetAddrLen | read-write | current | The prefix length of source IP address |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.30 | ScalarsleV2SecurityACLFlowControlDstInetAddrLen | read-write | current | The prefix length of destination IP address |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.3 | NodesleV2Security4ACLFlowNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1 | NotificationsleACLFlowCreated | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2 | NotificationsleACLFlowChanged | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3 | NotificationsleACLFlowDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4 | NotificationsleACLFlowAllDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5 | NotificationsleACLFlowExCreated | current | createACLFlowEx | |
| 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6 | NotificationsleACLFlowExChanged | current | setACLFlowEx | |
| 1.3.6.1.4.1.6296.102.7.2.5.2.2 | NodesleV2Security4ACLFlowClass | |||
| 1.3.6.1.4.1.6296.102.7.2.5.2.2.1 | TablesleV2Security4ACLFlowClassTable | not-accessible | current | ACL flow class table. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1 | RowsleV2Security4ACLFlowClassEntry | not-accessible | current | key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex |
| 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.1 | ColumnsleV2Security4ACLFlowClassIndex | read-only | current | The index of the class for the flow |
| 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.2 | ColumnsleV2Security4ACLFlowClassID | read-only | current | The identifier of the class |
| 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.3 | ColumnsleV2Security4ACLFlowClassName | read-only | current | The name of the class |
| 1.3.6.1.4.1.6296.102.7.2.5.2.3 | NodesleV2Security4ACLFlowPolicy | |||
| 1.3.6.1.4.1.6296.102.7.2.5.2.3.1 | TablesleV2QoS4ACLFlowPolicyTable | not-accessible | current | ACL flow policy table. |
| 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1 | RowsleV2QoS4ACLFlowPolicyEntry | not-accessible | current | key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex |
| 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.1 | ColumnsleV2Security4ACLFlowPolicyIndex | read-only | current | The index of the policy for the flow |
| 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.2 | ColumnsleV2Security4ACLFlowPolicyID | read-only | current | The identifier of the policy |
| 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.3 | ColumnsleV2Security4ACLFlowPolicyName | read-only | current | The name of the policy |
| 1.3.6.1.4.1.6296.102.7.2.5.3 | NodesleV2Security4ACLClass | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.1 | NodesleV2Security4ACLClassInfo | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.1 | TablesleV2Security4ACLClassTable | not-accessible | current | ACL class table. |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1 | RowsleV2Security4ACLClassEntry | not-accessible | current | key: sleV2Security4ACLClassIndex |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.1 | ColumnsleV2Security4ACLClassIndex | read-only | current | The index of class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.2 | ColumnsleV2Security4ACLClassName | read-only | current | The name of class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.3 | ColumnsleV2Security4ACLClassFlowCnt | read-only | current | The counter of flow in class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2 | NodesleV2Security4ACLClassControl | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.1 | ScalarsleV2Security4ACLClassControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.2 | ScalarsleV2Security4ACLClassControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.3 | ScalarsleV2Security4ACLClassControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.4 | ScalarsleV2Security4ACLClassControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.5 | ScalarsleV2Security4ACLClassControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.6 | ScalarsleV2Security4ACLClassControlIndex | read-write | current | The index of class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.7 | ScalarsleV2Security4ACLClassControlName | read-write | current | The name of class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.3 | NodesleV2Security4ACLClassNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1 | NotificationsleACLClassCreated | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2 | NotificationsleACLClassDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3 | NotificationsleACLClassAllDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2 | NodesleV2Security4ACLClassFlow | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.1 | TablesleV2Security4ACLClassFlowTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1 | RowsleV2Security4ACLClassFlowEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.1 | ColumnsleV2Security4ACLClassFlowIndex | read-only | current | The index of flow in class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.2 | ColumnsleV2Security4ACLClassFlowID | read-only | current | The identifier of flow |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.3 | ColumnsleV2Security4ACLClassFlowName | read-only | current | The name of the flow |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.4 | ColumnsleV2Security4ACLClassFlowClassName | read-only | current | The class name of the Classflow |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2 | NodesleV2Security4ACLClassFlowControl | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.1 | ScalarsleV2Security4ACLClassFlowControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.2 | ScalarsleV2Security4ACLClassFlowControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.3 | ScalarsleV2Security4ACLClassFlowControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.4 | ScalarsleV2Security4ACLClassFlowControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.5 | ScalarsleV2Security4ACLClassFlowControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.6 | ScalarsleV2Security4ACLClassFlowControlClassIndex | read-write | current | The index of class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.7 | ScalarsleV2Security4ACLClassFlowControlFlowIndex | read-write | current | The index of flow in this class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.8 | ScalarsleV2Security4ACLClassFlowControlFlowID | read-write | current | The index of flow Refer to sleV2QoS4FlowIndex |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.9 | ScalarsleV2Security4ACLClassFlowControlClassName | read-write | current | The class name of classFlow |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.3 | NodesleV2Security4ACLClassFlowNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1 | NotificationsleACLClassFlowAdded | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2 | NotificationsleACLClassFlowDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3 | NotificationsleACLClassFlowAllDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.3.3 | NodesleV2Security4ACLClassPolicy | |||
| 1.3.6.1.4.1.6296.102.7.2.5.3.3.1 | TablesleV2Security4ACLClassPolicyTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1 | RowsleV2Security4ACLClassPolicyEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.1 | ColumnsleV2Security4ACLClassPolicyIndex | read-only | current | The index of the policy for the class |
| 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.2 | ColumnsleV2Security4ACLClassPolicyID | read-only | current | The identifier of the policy |
| 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.3 | ColumnsleV2Security4ACLClassPolicyName | read-only | current | The name of the policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4 | NodesleV2Security4ACLPolicy | |||
| 1.3.6.1.4.1.6296.102.7.2.5.4.1 | NodesleV2Security4ACLPolicyInfo | |||
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1 | TablesleV2Security4ACLPolicyTable | not-accessible | current | ACL policy table. |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1 | RowsleV2Security4ACLPolicyEntry | not-accessible | current | key: sleV2Security4ACLPolicyIndex |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.1 | ColumnsleV2Security4ACLPolicyIndex | read-only | current | The index of policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.2 | ColumnsleV2Security4ACLPolicyName | read-only | current | The name of policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.3 | ColumnsleV2Security4ACLPolicyFlowCnt | read-only | current | The counter of flow that was included to policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.4 | ColumnsleV2Security4ACLPolicyClassCnt | read-only | current | The counter of class that was included to policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.5 | ColumnsleV2Security4ACLPolicyPriority | read-only | current | The priority of the policy low : default value |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.6 | ColumnsleV2Security4ACLPolicyMatchFlag | read-only | current | The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS… |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.7 | ColumnsleV2Security4ACLPolicyNomatchFlag | read-only | current | The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to… |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2 | NodesleV2Security4ACLPolicyControl | |||
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.1 | ScalarsleV2Security4ACLPolicyControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.2 | ScalarsleV2Security4ACLPolicyControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.3 | ScalarsleV2Security4ACLPolicyControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.4 | ScalarsleV2Security4ACLPolicyControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.5 | ScalarsleV2Security4ACLPolicyControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.6 | ScalarsleV2Security4ACLPolicyControlIndex | read-write | current | The index of policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.7 | ScalarsleV2Security4ACLPolicyControlName | read-write | current | The name of policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.8 | ScalarsleV2Security4ACLPolicyControlPriority | read-write | current | The priority of the policy low : default |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.9 | ScalarsleV2Security4ACLPolicyControlMatchFlag | read-write | current | The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS… |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.10 | ScalarsleV2Security4ACLPolicyControlNomatchFlag | read-write | current | The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to… |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.11 | ScalarsleV2Security4ACLPolicyControlFlowID | read-write | current | The index of flow |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.12 | ScalarsleV2Security4ACLPolicyControlClassID | read-write | current | The index of class |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.3 | NodesleV2Security4ACLPolicyNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1 | NotificationsleACLPolicyCreated | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2 | NotificationsleACLPolicyInfoChanged | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3 | NotificationsleACLPolicyMatchActionChanged | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4 | NotificationsleACLPolicyNomatchActionChanged | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5 | NotificationsleACLPolicyDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2 | NodesleV2Security4ACLPolicyFlowClass | |||
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.1 | TablesleV2Security4ACLPolicyFlowClassTable | not-accessible | current | ACL policy flow class table. |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1 | RowsleV2Security4ACLPolicyFlowClassEntry | not-accessible | current | key: sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.1 | ColumnsleV2Security4ACLPolicyFlowClassIndex | read-only | current | The index of flow or class in policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.2 | ColumnsleV2Security4ACLPolicyFlowClassType | read-only | current | The flag about flow or class |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.3 | ColumnsleV2Security4ACLPolicyFlowClassID | read-only | current | The identifier of class or flow |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.4 | ColumnsleV2Security4ACLPolicyFlowClassName | read-only | current | The name of class or flow |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2 | NodesleV2Security4ACLPolicyFlowClassControl | |||
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.1 | ScalarsleV2Security4ACLPolicyFlowClassControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.2 | ScalarsleV2Security4ACLPolicyFlowClassControlStatus | read-write | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.3 | ScalarsleV2Security4ACLPolicyFlowClassControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.4 | ScalarsleV2Security4ACLPolicyFlowClassControlTimeStamp | read-write | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.5 | ScalarsleV2Security4ACLPolicyFlowClassControlReqResult | read-write | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.6 | ScalarsleV2Security4ACLPolicyFlowClassControlPolicyIndex | read-write | current | The index of Policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.7 | ScalarsleV2Security4ACLPolicyFlowClassControlIndex | read-write | current | The index of flow or class in this policy |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.8 | ScalarsleV2Security4ACLPolicyFlowClassControlType | read-write | current | The type of flow or class |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.9 | ScalarsleV2Security4ACLPolicyFlowClassControlFlowID | read-write | current | The index of flow Available according to sleV2QoS4PolicyFlowClassControlType. |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.10 | ScalarsleV2Security4ACLPolicyFlowClassControlClassID | read-write | current | The index of class Available according to sleV2QoS4PolicyFlowClassControlType. |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.3 | NodesleV2Security4ACLPolicyFlowClassNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1 | NotificationsleACLPolicyFlowAdded | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2 | NotificationsleACLPolicyFlowDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3 | NotificationsleACLPolicyAllFlowDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4 | NotificationsleACLPolicyAllClassDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5 | NotificationsleACLPolicyAllFlowClassDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.5.5 | NodesleV2Security4ACLGroup | |||
| 1.3.6.1.4.1.6296.102.7.2.5.5.1 | NodesleV2Security4ACLGroupIf | |||
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.1 | TablesleV2Security4ACLGroupIfTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1 | RowsleV2Security4ACLGroupIfEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.1 | ColumnsleV2Security4ACLGroupIfindex | read-only | current | interface index |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.2 | ColumnsleV2Security4ACLGroupIfType | read-only | current | The access-list type |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.3 | ColumnsleV2Security4ACLGroupIfName | read-only | current | The access-list name |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.4 | ColumnsleV2Security4ACLGroupIfPriority | read-only | current | The policy priority |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2 | NodesleV2Security4ACLGroupIfControl | |||
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.1 | ScalarsleV2Security4ACLGroupIfControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.2 | ScalarsleV2Security4ACLGroupIfControlStatus | read-write | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.3 | ScalarsleV2Security4ACLGroupIfControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.4 | ScalarsleV2Security4ACLGroupIfControlReqResult | read-write | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.5 | ScalarsleV2Security4ACLGroupIfControlTimeStamp | read-write | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.6 | ScalarsleV2Security4ACLGroupIfConrolIndex | read-write | current | interface index |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.7 | ScalarsleV2Security4ACLGroupIfControlType | read-write | current | The access-list type |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.8 | ScalarsleV2Security4ACLGroupIfControlName | read-write | current | The access-list name |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.9 | ScalarsleV2Security4ACLGroupIfControlPriority | read-write | current | Integer 1: low(1) 2: medium(2) 3: high(3) 4: highest(4) The policy priority |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.3 | NodesleV2SecurityACLGroupIfNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1 | NotificationsleV2Security4ACLGroupIfProfileAdd | current | setSecurityACLGroupIfProfile | |
| 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2 | NotificationsleV2Security4ACLGroupIfProfileDelete | current | delSecurityACLGroupIfProfile | |
| 1.3.6.1.4.1.6296.102.7.2.6 | NodesleV2SecuritySACL | |||
| 1.3.6.1.4.1.6296.102.7.2.6.1 | TablesleV2SecuritySACLTable | not-accessible | current | ACL table. |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1 | RowsleV2SecuritySACLEntry | not-accessible | current | key: sleV2SecuritySACLName |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.1 | ColumnsleV2SecuritySACLName | read-only | current | Name of this ACL rule |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.2 | ColumnsleV2SecuritySACLSrcIpaddr | read-only | current | The IP address to match against the packet��s source IP address |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.3 | ColumnsleV2SecuritySACLSrcPrefixLength | read-only | current | Subnet mask. |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.4 | ColumnsleV2SecuritySACLDstIpAddr | read-only | current | The IP address to match against the packet��s destination IP address |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.5 | ColumnsleV2SecuritySACLDstPrefixLength | read-only | current | Subnet mask. |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.6 | ColumnsleV2SecuritySACLProtocolType | read-only | current | The type of IP protocol The flat internet protocol is from sleV2SecuritySACLTcpflag to sleV2SecuritySACLIcmpCode If the value is tcp(6) or udp(17), From sleV2S… |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.7 | ColumnsleV2SecuritySACLTcpflag | read-only | current | TCP flag |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.8 | ColumnsleV2SecuritySACLSrcL4Port | read-only | current | The source service port number (only valid for TCP or UDP packet).. |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.9 | ColumnsleV2SecuritySACLDstL4Port | read-only | current | The destination service port number (only valid for TCP or UDP packet). |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.10 | ColumnsleV2SecuritySACLIcmpType | read-only | current | The Type of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.11 | ColumnsleV2SecuritySACLIcmpCode | read-only | current | The code of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.12 | ColumnsleV2SecuritySACLPriority | read-only | current | The type of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.13 | ColumnsleV2SecuritySACLMatchAction | read-only | current | Action for packets that match against this ACL rule. |
| 1.3.6.1.4.1.6296.102.7.2.6.1.1.14 | ColumnsleV2SecuritySACLNomatchAction | read-only | current | Action for packets that don��t match against this ACL rule. |
| 1.3.6.1.4.1.6296.102.7.2.6.2 | NodesleV2SecuritySACLControl | |||
| 1.3.6.1.4.1.6296.102.7.2.6.2.1 | ScalarsleV2SecuritySACLControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.6.2.2 | ScalarsleV2SecuritySACLControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.6.2.3 | ScalarsleV2SecuritySACLControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.6.2.4 | ScalarsleV2SecuritySACLControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.6.2.5 | ScalarsleV2SecuritySACLControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.6.2.6 | ScalarsleV2SecuritySACLControlName | read-write | current | Name of this ACL rule |
| 1.3.6.1.4.1.6296.102.7.2.6.2.7 | ScalarsleV2SecuritySACLControlSrcIpaddr | read-write | current | The IP address to match against the packet��s source IP address |
| 1.3.6.1.4.1.6296.102.7.2.6.2.8 | ScalarsleV2SecuritySACLControlSrcPrefixLength | read-write | current | Subnet mask. |
| 1.3.6.1.4.1.6296.102.7.2.6.2.9 | ScalarsleV2SecuritySACLControlDstIpaddr | read-write | current | The IP address to match against the packet��s destination IP address |
| 1.3.6.1.4.1.6296.102.7.2.6.2.10 | ScalarsleV2SecuritySACLControlDstPrefixLength | read-write | current | Subnet mask. |
| 1.3.6.1.4.1.6296.102.7.2.6.2.11 | ScalarsleV2SecuritySACLControlProtocolType | read-write | current | The IP protocol type value |
| 1.3.6.1.4.1.6296.102.7.2.6.2.12 | ScalarsleV2SecuritySACLControlTcpflag | read-write | current | TCP flag |
| 1.3.6.1.4.1.6296.102.7.2.6.2.13 | ScalarsleV2SecuritySACLControlSrcL4Port | read-write | current | The source service port number (only valid for TCP or UDP packet).. |
| 1.3.6.1.4.1.6296.102.7.2.6.2.14 | ScalarsleV2SecuritySACLControlDstL4Port | read-write | current | The destination service port number (only valid for TCP or UDP packet). |
| 1.3.6.1.4.1.6296.102.7.2.6.2.15 | ScalarsleV2SecuritySACLControlIcmpType | read-write | current | The type of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.6.2.16 | ScalarsleV2SecuritySACLControlIcmpCode | read-write | current | The code of ICMP message The value of -1 means any(not set) |
| 1.3.6.1.4.1.6296.102.7.2.6.2.17 | ScalarsleV2SecuritySACLControlPriority | read-write | current | The Priority of this ACL rule) |
| 1.3.6.1.4.1.6296.102.7.2.6.2.18 | ScalarsleV2SecuritySACLControlMatchAction | read-write | current | Action for packets that match against this ACL rule. |
| 1.3.6.1.4.1.6296.102.7.2.6.2.19 | ScalarsleV2SecuritySACLControlNomatchAction | read-write | current | Action for packets that don��t match against this ACL rule. |
| 1.3.6.1.4.1.6296.102.7.2.6.3 | NodesleV2SecuritySACLNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.6.3.1 | NotificationsleSACLCreated | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.6.3.2 | NotificationsleSACLDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.6.3.3 | NotificationsleSACLAllDestroyed | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.7 | NodesleV2SecurityACLStatistics | |||
| 1.3.6.1.4.1.6296.102.7.2.7.1 | NodesleV2SecurityACLStatisticsBase | |||
| 1.3.6.1.4.1.6296.102.7.2.7.1.1 | NodesleV2SecurityACLStatisticsBaseInfo | |||
| 1.3.6.1.4.1.6296.102.7.2.7.1.1.1 | ScalarsleV2SecurityACLStatisticsSyslogStatus | read-only | current | ACL statistics syslog status |
| 1.3.6.1.4.1.6296.102.7.2.7.1.2 | NodesleV2SecurityACLStatisticsBaseControl | |||
| 1.3.6.1.4.1.6296.102.7.2.7.1.2.1 | ScalarsleV2SecurityACLStatisticsBaseControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.7.1.2.2 | ScalarsleV2SecurityACLStatisticsBaseControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.7.1.2.3 | ScalarsleV2SecurityACLStatisticsBaseControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.7.1.2.4 | ScalarsleV2SecurityACLStatisticsBaseControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.7.1.2.5 | ScalarsleV2SecurityACLStatisticsBaseControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.7.1.2.6 | ScalarsleV2SecurityACLStatisticsBaseControlSyslogMode | read-write | current | The ACL statistics syslog mode |
| 1.3.6.1.4.1.6296.102.7.2.7.1.3 | NodesleV2SecurityACLStatisticsBaseNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.7.1.3.1 | NotificationsleV2SecurityACLStatisticsSyslogModeChanged | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.7.2 | NodesleV2SecurityACLStatisticsPacketHistory | |||
| 1.3.6.1.4.1.6296.102.7.2.7.2.1 | TablesleV2SecurityACLPacketCountTable | not-accessible | current | ACL packet count table. |
| 1.3.6.1.4.1.6296.102.7.2.7.2.1.1 | RowsleV2SecurityACLPacketCountEntry | not-accessible | current | key: sleV2SecuritySACLName |
| 1.3.6.1.4.1.6296.102.7.2.7.2.1.1.1 | ColumnsleV2SecurityACLTotalPacket | read-only | current | ACL total packet |
| 1.3.6.1.4.1.6296.102.7.2.7.2.2 | TablesleV2SecurityACLSrcHistoryTable | not-accessible | current | ACL source history table. |
| 1.3.6.1.4.1.6296.102.7.2.7.2.2.1 | RowsleV2SecurityACLSrcHistoryEntry | not-accessible | current | key: sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex |
| 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.1 | ColumnsleV2SecurityACLSrcHistoryIndex | read-only | current | The ACL index. |
| 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.2 | ColumnsleV2SecurityACLSrcHistoryIpAddr | read-only | current | The ACl IP address |
| 1.3.6.1.4.1.6296.102.7.2.7.2.3 | NodesleV2SecurityACLStatisticsControl | |||
| 1.3.6.1.4.1.6296.102.7.2.7.2.3.1 | ScalarsleV2SecurityACLStatisticsControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.7.2.3.2 | ScalarsleV2SecurityACLStatisticsControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.7.2.3.3 | ScalarsleV2SecurityACLStatisticsControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.7.2.3.4 | ScalarsleV2SecurityACLStatisticsControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.7.2.3.5 | ScalarsleV2SecurityACLStatisticsControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.7.2.3.6 | ScalarsleV2SecurityACLStatisticsControlName | read-write | current | The ACL statistics name |
| 1.3.6.1.4.1.6296.102.7.2.7.2.4 | NodesleV2SecurityACLStatisticsNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.7.2.4.1 | NotificationsleV2SecurityACLStatisticsCleared | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.8 | NodesleV2CpuPacketFilter | |||
| 1.3.6.1.4.1.6296.102.7.2.8.1 | TablesleV2CpuPacketFilterTable | not-accessible | current | cpu packet filter table. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1 | RowsleV2CpuPacketFilterEntry | not-accessible | current | key: sleV2CpuPacketFilterIndex |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.1 | ColumnsleV2CpuPacketFilterIndex | read-only | current | The index of cpu packet filter |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.2 | ColumnsleV2CpuPacketFilterName | read-only | current | The name of cpu packet filter |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.3 | ColumnsleV2CpuPacketFilterCreationTime | read-only | current | The creation time. (unit : sec) |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.4 | ColumnsleV2CpuPacketFilterElapsedtimeAfterClear | read-only | current | The elapsed time after clear (unit : sec) |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.5 | ColumnsleV2CpuPacketFilterStage | read-only | current | The stage of cpu packet filter. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.6 | ColumnsleV2CpuPacketFilterPriority | read-only | current | The priority of cpu packet filter. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.7 | ColumnsleV2CpuPacketFilterAction | read-only | current | The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.8 | ColumnsleV2CpuPacketFilterActionRateLimit | read-only | current | The allowed-packet count per second. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.9 | ColumnsleV2CpuPacketFilterActionBurstSize | read-only | current | The burst-allowed-packet count. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.10 | ColumnsleV2CpuPacketFilterActionTpid | read-only | current | The Action TPID The value 65535(0xffff) means any. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.11 | ColumnsleV2CpuPacketFilterActionPcp | read-only | current | The Action PCP. The value 255(0xff) means any. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.12 | ColumnsleV2CpuPacketFilterActionVid | read-only | current | The Action VID The value 65535(0xffff) means any. |
| 1.3.6.1.4.1.6296.102.7.2.8.1.1.13 | ColumnsleV2CpuPacketFilterActionTagPosition | read-only | current | The Action tag position. 1 s-vlan 2 c-vlan |
| 1.3.6.1.4.1.6296.102.7.2.8.2 | TablesleV2CpuPacketFilterMatchTable | not-accessible | current | cpu packet filter match table. |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1 | RowsleV2CpuPacketFilterMatchEntry | not-accessible | current | key: sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.1 | ColumnsleV2CpuPacketFilterMatchIndex | read-only | current | The match entry Index |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.2 | ColumnsleV2CpuPacketFilterMatchType | read-only | current | The match classifiter type. |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.3 | ColumnsleV2CpuPacketFilterMatchCos | read-only | current | The matched CoS Queue. |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.4 | ColumnsleV2CpuPacketFilterMatchPort | read-only | current | The matched port index. |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.5 | ColumnsleV2CpuPacketFilterMatchVidmap | read-only | current | The matched VID. |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.6 | ColumnsleV2CpuPacketFilterMatchTagPosition | read-only | current | The matched tag position. |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.7 | ColumnsleV2CpuPacketFilterMatchTpid | read-only | current | The matched TPID. |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.8 | ColumnsleV2CpuPacketFilterMatchPcp | read-only | current | The matched PCP |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.9 | ColumnsleV2CpuPacketFilterMatchVid | read-only | current | The matched VID |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.10 | ColumnsleV2CpuPacketFilterMatchOffset | read-only | current | The matched offset |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.11 | ColumnsleV2CpuPacketFilterMatchLength | read-only | current | The matched Length |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.12 | ColumnsleV2CpuPacketFilterMatchData | read-only | current | The matched data. (HEX string) |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.13 | ColumnsleV2CpuPacketFilterMatchMask | read-only | current | The matched mask. (HEX string) |
| 1.3.6.1.4.1.6296.102.7.2.8.2.1.14 | ColumnsleV2CpuPacketFilterMatchDesc | read-only | current | The matched Description |
| 1.3.6.1.4.1.6296.102.7.2.8.3 | NodesleV2CpuPacketFilterControl | |||
| 1.3.6.1.4.1.6296.102.7.2.8.3.1 | ScalarsleV2CpuPacketFilterControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.8.3.2 | ScalarsleV2CpuPacketFilterControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.8.3.3 | ScalarsleV2CpuPacketFilterControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.8.3.4 | ScalarsleV2CpuPacketFilterControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.8.3.5 | ScalarsleV2CpuPacketFilterControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.8.3.6 | ScalarsleV2CpuPacketFilterControlIndex | read-write | current | The match entry Index |
| 1.3.6.1.4.1.6296.102.7.2.8.3.7 | ScalarsleV2CpuPacketFilterControlName | read-write | current | Cpu packet filter name. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.8 | ScalarsleV2CpuPacketFilterControlStage | read-write | current | The stage of cpu packet filter. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.9 | ScalarsleV2CpuPacketFilterControlPriority | read-write | current | The priority of cpu packet filter. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.10 | ScalarsleV2CpuPacketFilterControlAction | read-write | current | The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove |
| 1.3.6.1.4.1.6296.102.7.2.8.3.11 | ScalarsleV2CpuPacketFilterControlActionRateLimit | read-write | current | The allowed-packet count per second. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.12 | ScalarsleV2CpuPacketFilterControlActionBurstSize | read-write | current | The burst-allowed-packet count. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.13 | ScalarsleV2CpuPacketFilterControlActionTpid | read-write | current | The Action TPID The value 65535(0xffff) means any. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.14 | ScalarsleV2CpuPacketFilterControlActionPcp | read-write | current | The Action PCP. The value 255(0xff) means any. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.15 | ScalarsleV2CpuPacketFilterControlActionVid | read-write | current | The Action VID The value 65535(0xffff) means any. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.16 | ScalarsleV2CpuPacketFilterControlActionTagPosition | read-write | current | The Action tag position. 1: S-vlan 2: C-vlan M2200 uses only 1 and 2. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.17 | ScalarsleV2CpuPacketFilterControlMatchType | read-write | current | The match classifiter type. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.18 | ScalarsleV2CpuPacketFilterControlMatchCos | read-write | current | The matched CoS Queue. M2200 doesn't use |
| 1.3.6.1.4.1.6296.102.7.2.8.3.19 | ScalarsleV2CpuPacketFilterControlMatchPort | read-write | current | The matched port index. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.20 | ScalarsleV2CpuPacketFilterControlMatchVidmap | read-write | current | The matched VID M2200 doesn't use |
| 1.3.6.1.4.1.6296.102.7.2.8.3.21 | ScalarsleV2CpuPacketFilterControlMatchTagPosition | read-write | current | The matched tag position M2200 doesn't use |
| 1.3.6.1.4.1.6296.102.7.2.8.3.22 | ScalarsleV2CpuPacketFilterControlMatchTpid | read-write | current | The matched TPID. |
| 1.3.6.1.4.1.6296.102.7.2.8.3.23 | ScalarsleV2CpuPacketFilterControlMatchPcp | read-write | current | The matched PCP |
| 1.3.6.1.4.1.6296.102.7.2.8.3.24 | ScalarsleV2CpuPacketFilterControlMatchVid | read-write | current | The matched VID |
| 1.3.6.1.4.1.6296.102.7.2.8.3.25 | ScalarsleV2CpuPacketFilterControlMatchOffset | read-write | current | The matched offset |
| 1.3.6.1.4.1.6296.102.7.2.8.3.26 | ScalarsleV2CpuPacketFilterControlMatchLength | read-write | current | The matched Length |
| 1.3.6.1.4.1.6296.102.7.2.8.3.27 | ScalarsleV2CpuPacketFilterControlMatchData | read-write | current | he matched data. (HEX string) |
| 1.3.6.1.4.1.6296.102.7.2.8.3.28 | ScalarsleV2CpuPacketFilterControlMatchMask | read-write | current | The matched mask. (HEX string) |
| 1.3.6.1.4.1.6296.102.7.2.8.3.29 | ScalarsleV2CpuPacketFilterControlMatchDesc | read-write | current | The matched Description |
| 1.3.6.1.4.1.6296.102.7.2.8.4 | NodesleV2CpuPacketFilterNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.8.4.1 | NotificationsleV2CpuPacketFilterAdded | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.8.4.2 | NotificationsleV2CpuPacketFilterDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.8.4.3 | NotificationsleV2CpuPacketFilterActionChanged | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.8.4.4 | NotificationsleV2CpuPacketFilterMatchChanged | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.2.9 | NodesleV2VlanOperation | |||
| 1.3.6.1.4.1.6296.102.7.2.9.1 | TablesleV2VlanOperationTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1 | RowsleV2VlanOperationEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.1 | ColumnsleV2VlanOperationIndex | read-only | current | The vlan operation index. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.2 | ColumnsleV2VlanOperationName | read-only | current | The vlan operation name |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.3 | ColumnsleV2VlanOperationStage | read-only | current | The vlan operation stage. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.4 | ColumnsleV2VlanOperationProiroty | read-only | current | The vlan operation priority. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.5 | ColumnsleV2VlanOperationPort | read-only | current | The vlan operation ports |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.6 | ColumnsleV2VlanOperationOuterVlan | read-only | current | The Outer vlan. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.7 | ColumnsleV2VlanOperationInnerVlan | read-only | current | The inner Vlan. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.8 | ColumnsleV2VlanOperationEtherType | read-only | current | The vlan operation ether-type. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.9 | ColumnsleV2VlanOperationIpProtocol | read-only | current | The vlan operation IP Protocol |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.10 | ColumnsleV2VlanOperationArpSip | read-only | current | The vlan operation source-IPaddress. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.11 | ColumnsleV2VlanOperationArpSipPfxLen | read-only | current | The vlan operation source-IPAddress prefix-length. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.12 | ColumnsleV2VlanOperationSip | read-only | current | The vlan operation Source-IPaddress. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.13 | ColumnsleV2VlanOperationSipPfxLen | read-only | current | The vlan operation Source-IPAddress prefix-length. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.14 | ColumnsleV2VlanOperationDip | read-only | current | The vlan operation Destination-IPaddress. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.15 | ColumnsleV2VlanOperationDipPfxLen | read-only | current | The vlan operation Destination-IPAddress prefix-length. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.16 | ColumnsleV2VlanOperationAction | read-only | current | The vlan-operation action types. |
| 1.3.6.1.4.1.6296.102.7.2.9.1.1.17 | ColumnsleV2VlanOperationActionVid | read-only | current | The vlan operation action-vid. |
| 1.3.6.1.4.1.6296.102.7.2.9.2 | NodesleV2VlanOperationControl | |||
| 1.3.6.1.4.1.6296.102.7.2.9.2.1 | ScalarsleV2VlanOperationControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.9.2.2 | ScalarsleV2VlanOperationControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.9.2.3 | ScalarsleV2VlanOperationControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.9.2.4 | ScalarsleV2VlanOperationControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.9.2.5 | ScalarsleV2VlanOperationControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.9.2.6 | ScalarsleV2VlanOperationControlIndex | read-write | current | The vlan operation index. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.7 | ScalarsleV2VlanOperationControlName | read-write | current | The vlan operation name |
| 1.3.6.1.4.1.6296.102.7.2.9.2.8 | ScalarsleV2VlanOperationControlStage | read-write | current | The vlan operation stage. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.9 | ScalarsleV2VlanOperationControlProiroty | read-write | current | The vlan operation priority. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.10 | ScalarsleV2VlanOperationControlPort | read-write | current | The vlan operation ports |
| 1.3.6.1.4.1.6296.102.7.2.9.2.11 | ScalarsleV2VlanOperationControlOuterVlan | read-write | current | The Outer vlan. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.12 | ScalarsleV2VlanOperationControlInnerVlan | read-write | current | The Inner vlan. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.13 | ScalarsleV2VlanOperationControlEtherType | read-write | current | The vlan operation ether-type. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.14 | ScalarsleV2VlanOperationControlIpProtocol | read-write | current | The vlan operation IP Protocol |
| 1.3.6.1.4.1.6296.102.7.2.9.2.15 | ScalarsleV2VlanOperationControlArpSip | read-write | current | The vlan operation source-IPaddress. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.16 | ScalarsleV2VlanOperationControlArpSipPfxLen | read-write | current | The vlan operation source-IPAddress prefix-length. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.17 | ScalarsleV2VlanOperationControlSip | read-write | current | The vlan operation Source-IPaddress. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.18 | ScalarsleV2VlanOperationControlSipPfxLen | read-write | current | The vlan operation Source-IPAddress prefix-length. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.19 | ScalarsleV2VlanOperationControlDip | read-write | current | The vlan operation Destination-IPaddress. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.20 | ScalarsleV2VlanOperationControlDipPfxLen | read-write | current | The vlan operation Destination-IPAddress prefix-length. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.21 | ScalarsleV2VlanOperationControlAction | read-write | current | The vlan-operation action types. |
| 1.3.6.1.4.1.6296.102.7.2.9.2.22 | ScalarsleV2VlanOperationControlActionVid | read-write | current | The vlan operation action-vid. |
| 1.3.6.1.4.1.6296.102.7.2.9.3 | NodesleV2VlanOperationNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.9.3.1 | NotificationsleV2VlanOperationCreated | current | addVlanOperation | |
| 1.3.6.1.4.1.6296.102.7.2.9.3.2 | NotificationsleV2VlanOperationDeleted | current | delVlanOperation | |
| 1.3.6.1.4.1.6296.102.7.2.10 | NodesleV2EthernetService | |||
| 1.3.6.1.4.1.6296.102.7.2.10.1 | NodesleV2EthernetServiceBase | |||
| 1.3.6.1.4.1.6296.102.7.2.10.1.1 | ScalarsleV2EthernetServiceEnableStatus | read-only | current | The ethernet service mode status. |
| 1.3.6.1.4.1.6296.102.7.2.10.1.2 | ScalarsleV2EthernetServiceEnableManagement | read-only | current | The global management access status ( only in RT mode ) |
| 1.3.6.1.4.1.6296.102.7.2.10.1.3 | ScalarsleV2EthernetServiceHealthCheckPort | read-only | current | The health check port of uplink. ( only in COT mode ) |
| 1.3.6.1.4.1.6296.102.7.2.10.1.4 | ScalarsleV2EthernetServiceHealthCheckVid | read-only | current | The health check vid of uplink. ( only in COT mode ) |
| 1.3.6.1.4.1.6296.102.7.2.10.2 | TablesleV2EthernetServiceTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1 | RowsleV2EthernetServiceEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.1 | ColumnsleV2EthernetServiceSid | read-only | current | The unique number is given by service identifier. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.2 | ColumnsleV2EthernetServiceType | read-only | current | The ethernet service type 1: unicast 2: multicast |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.3 | ColumnsleV2EthernetServiceRtCustomerPort | read-only | current | The Configuring service's customer port for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.4 | ColumnsleV2EthernetServiceRtCustomerVid | read-only | current | The Configuring service's customer vid for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.5 | ColumnsleV2EthernetServiceRtNetworkPort | read-only | current | The Configuring service's network port for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.6 | ColumnsleV2EthernetServiceRtNetworkVid | read-only | current | The Configuring service's network vid for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.7 | ColumnsleV2EthernetServiceRtEnableManagement | read-only | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.8 | ColumnsleV2EthernetServiceCotExternalPort | read-only | current | The Configuring service's external port for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.9 | ColumnsleV2EthernetServiceCotExternalVid | read-only | current | The Configuring service's external vid for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.10 | ColumnsleV2EthernetServiceCotInternalPort | read-only | current | The Configuring service's internal port for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.2.1.11 | ColumnsleV2EthernetServiceCotInternalVid | read-only | current | The Configuring service's internal vid for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3 | NodesleV2EthernetServiceControl | |||
| 1.3.6.1.4.1.6296.102.7.2.10.3.1 | ScalarsleV2EthernetServiceControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.102.7.2.10.3.2 | ScalarsleV2EthernetServiceControlStatus | read-only | current | The status of user command |
| 1.3.6.1.4.1.6296.102.7.2.10.3.3 | ScalarsleV2EthernetServiceControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.102.7.2.10.3.4 | ScalarsleV2EthernetServiceControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.102.7.2.10.3.5 | ScalarsleV2EthernetServiceControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.102.7.2.10.3.6 | ScalarsleV2EthernetServiceControlEnableStatus | read-write | current | The ethernet service mode status. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.7 | ScalarsleV2EthernetServiceControlEnableManagement | read-write | current | The local management access status ( only in RT mode ) |
| 1.3.6.1.4.1.6296.102.7.2.10.3.8 | ScalarsleV2EthernetServiceControlHealthCheckPort | read-write | current | The health check port of uplink. ( only in COT mode ) |
| 1.3.6.1.4.1.6296.102.7.2.10.3.9 | ScalarsleV2EthernetServiceControlHealthCheckVid | read-write | current | The health check vid of uplink. ( only in COT mode ) |
| 1.3.6.1.4.1.6296.102.7.2.10.3.10 | ScalarsleV2EthernetServiceControlSid | read-write | current | The unique number is given by service identifier. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.11 | ScalarsleV2EthernetServiceControlType | read-write | current | The ethernet service type 1: unicast 2: multicast |
| 1.3.6.1.4.1.6296.102.7.2.10.3.12 | ScalarsleV2EthernetServiceControlRtCustomerPort | read-write | current | The Configuring service's customer port for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.13 | ScalarsleV2EthernetServiceControlRtCustomerVid | read-write | current | The Configuring service's customer vid for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.14 | ScalarsleV2EthernetServiceControlRtNetworkPort | read-write | current | The Configuring service's network port for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.15 | ScalarsleV2EthernetServiceControlRtNetworkVid | read-write | current | The Configuring service's network vid for RT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.16 | ScalarsleV2EthernetServiceControlRtEnableManagement | read-write | current | Description. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.17 | ScalarsleV2EthernetServiceControlCotExternalPort | read-write | current | The Configuring service's external port for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.18 | ScalarsleV2EthernetServiceControlCotExternalVid | read-write | current | The Configuring service's external vid for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.19 | ScalarsleV2EthernetServiceControlCotInternalPort | read-write | current | The Configuring service's internal port for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.3.20 | ScalarsleV2EthernetServiceControlCotInternalVid | read-write | current | The Configuring service's internal vid for COT mode. |
| 1.3.6.1.4.1.6296.102.7.2.10.4 | NodesleV2EthernetServiceNotification | |||
| 1.3.6.1.4.1.6296.102.7.2.10.4.1 | NotificationsleV2EthernetServiceEnableStatusChanged | current | setEnableStatus | |
| 1.3.6.1.4.1.6296.102.7.2.10.4.2 | NotificationsleV2EthernetServiceEnableManagementChanged | current | setEnableManagement | |
| 1.3.6.1.4.1.6296.102.7.2.10.4.3 | NotificationsleV2EthernetServiceHealthCheckChanged | current | setHealthCheck | |
| 1.3.6.1.4.1.6296.102.7.2.10.4.4 | NotificationsleV2EthernetServiceHealthCheckDeleted | current | delHealthCheck | |
| 1.3.6.1.4.1.6296.102.7.2.10.4.5 | NotificationsleV2EthernetServiceSidForRtModeCreated | current | setSidForRT | |
| 1.3.6.1.4.1.6296.102.7.2.10.4.6 | NotificationsleV2EthernetServiceSidForCotModeCreated | current | setSidForCOT | |
| 1.3.6.1.4.1.6296.102.7.2.10.4.7 | NotificationsleV2EthernetServiceSidDeleted | current | delService | |
| 1.3.6.1.4.1.6296.102.7.3 | NodesleV2Security6 | |||
| 1.3.6.1.4.1.6296.102.7.4 | GroupsleV2SecurityGroup | current | Description. | |
| 1.3.6.1.4.1.6296.102.7.5 | GroupsleV2SecurityNotificationGroup | current | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddressMask | OCTET STRING (SIZE (6)) | current | Represents Mac address Mask. |