SMC-AGENT-MIB
34 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.202 | Nodesmc | |||
| 1.3.6.1.4.1.202.2 | NodesmcDosWs | |||
| 1.3.6.1.4.1.202.2.1 | ScalarsmcDosWsPcTyp | read-only | mandatory | Make and model of the PC. This may have to be entered in the configuration disk file. It may or may not be detectable via signature strings in the BIOS. |
| 1.3.6.1.4.1.202.2.2 | ScalarsmcDosWsPcProc | read-only | mandatory | This is a text string showing the processor type and indicating whether a math coprocessor exists, e.g. '80286 w/math coprocessor'. |
| 1.3.6.1.4.1.202.2.3 | ScalarsmcDosWsPcBios | read-only | mandatory | This is a text signature string identifying the PC bios, e.g. 'Phoenix 80386SX ROM BIOS PLUS Version 1.10'. |
| 1.3.6.1.4.1.202.2.4 | ScalarsmcDosWsPcRam | read-only | mandatory | This is a text string listing the PC's ram configuration, base, EMS, XMS, e.g. '640K base, 1024K EMS, 3072K XMS'. |
| 1.3.6.1.4.1.202.2.5 | ScalarsmcDosWsPcDisk | read-only | mandatory | This is a text string listing the PC's disk configuration, number and size of drives, e.g. '1.25M Fpy, 1.44M Fpy, 79M HD'. |
| 1.3.6.1.4.1.202.2.6 | ScalarsmcDosWsPcVideo | read-only | mandatory | This is a text string listing the PC's video interface type and monitor type, e.g. 'VGA Color'. |
| 1.3.6.1.4.1.202.2.7 | ScalarsmcDosWsPcIo | read-only | mandatory | This is a text string listing the parallel and serial ports installed on the PC, e.g. 'LPT1, COM1, COM2'. |
| 1.3.6.1.4.1.202.2.8 | ScalarsmcDosWsDosVer | read-only | mandatory | This is a text string listing the version of DOS, e.g. 'DOS 3.3'. |
| 1.3.6.1.4.1.202.2.9 | ScalarsmcDosWsDrvId | read-only | mandatory | This is the signature string from the network driver. It is similar to the string that is displayed by the NetWare server MONITOR nlm. |
| 1.3.6.1.4.1.202.2.10 | ScalarsmcDosWsNicBasIo | read-only | mandatory | This is the I/O base address of the adapter card. |
| 1.3.6.1.4.1.202.2.11 | ScalarsmcDosWsNicIrq | read-only | mandatory | This is the adapter IRQ number. |
| 1.3.6.1.4.1.202.2.12 | ScalarsmcDosWsNicRam | read-only | mandatory | This is the adapter card packet ram address. |
| 1.3.6.1.4.1.202.2.13 | ScalarsmcDosWsNodId | read-only | mandatory | This is the adapter card 48 bit node ID. |
| 1.3.6.1.4.1.202.2.14 | ScalarsmcDosWsIpAdr | read-only | mandatory | This is the IP address of the PC. The agent takes this information from a configuration disk file. If the PC is also running a TCP/IP stack, it is up to the in… |
| 1.3.6.1.4.1.202.2.15 | ScalarsmcDosWsComment | read-write | mandatory | This is a text string which is set from a configuration disk file that contains comments about the PC that the network manager feels is meaningful. For example… |
| 1.3.6.1.4.1.202.2.16 | ScalarsmcDosWsPcDate | read-only | mandatory | This shows the current date set into the PC to alert the network manager of potential problems with software that decides configuration currency based on file … |
| 1.3.6.1.4.1.202.2.17 | ScalarsmcDosWsPcTime | read-only | mandatory | This shows the current time set into the PC to alert the network manager of potential problems with software that decides configuration currency based on file … |
| 1.3.6.1.4.1.202.2.18 | ScalarsmcDosWsRst | read-write | mandatory | This variable always reports value = 1. Setting it to 2 results in an adapter reset, after which it will contain value = 1 again. |
| 1.3.6.1.4.1.202.2.19 | ScalarsmcDosWsProtoMix | read-only | mandatory | This text string reports the most frequent transport protocols and their approximate percentages of traffic load. |
| 1.3.6.1.4.1.202.2.20 | ScalarsmcDosWsRcvPkts | read-only | mandatory | Number of packets received by the workstation |
| 1.3.6.1.4.1.202.2.21 | ScalarsmcDosWsXmtPkts | read-only | mandatory | Number of packets sent by the workstation |
| 1.3.6.1.4.1.202.2.22 | TablesmcDosWsDrvSpcTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.202.2.22.1 | RowsmcDosWsDrvSpcEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.202.2.22.1.1 | ColumnsmcDosWsDrvSpcId | read-only | mandatory | Number of Driver Specific entry. 1 for first entry, 2 for second entry, etc. |
| 1.3.6.1.4.1.202.2.22.1.2 | ColumnsmcDosWsDrvSpcTxt | read-only | mandatory | Textual name of driver specific diagnostic counter |
| 1.3.6.1.4.1.202.2.22.1.3 | ColumnsmcDosWsDrvSpcCnt | read-only | mandatory | Numeric value of driver specific diagnostic counter |
| 1.3.6.1.4.1.202.2.23 | TablesmcDosWsTrapDestTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.202.2.23.1 | RowsmcDosWsTrapDestEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.202.2.23.1.1 | ColumnsmcDosWsTrapId | read-only | mandatory | Number of Trap Destination entry. 1 for first entry, 2 for second entry, etc. |
| 1.3.6.1.4.1.202.2.23.1.2 | ColumnsmcDosWsTrapDstAdr | read-write | mandatory | This is an IP address to which alerts (traps) should be sent when significant events occur. |
| 1.3.6.1.4.1.202.2.23.1.3 | ColumnsmcDosWsTrapDstPro | read-write | mandatory | This is a code indicating the protocol to use when sending alerts. 1 means disabled, i.e. the corresponding smcDosWsTrapDstAdr variable is not really intended … |
| 1.3.6.1.4.1.202.2.24 | ScalarsmcDosWsApiTrap | read-only | mandatory | This is a string set by external applications which use the PC Agent API to send an SNMP trap |