SN-MSPS-SCW-MIB
2605 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.4329 | Nodesiemens | |||
| 1.3.6.1.4.1.4329.20 | NodeindustrialComProducts | |||
| 1.3.6.1.4.1.4329.20.1 | NodeiComPlatforms | |||
| 1.3.6.1.4.1.4329.20.1.1 | NodesimaticNet | |||
| 1.3.6.1.4.1.4329.20.1.1.1 | NodesnMsps | |||
| 1.3.6.1.4.1.4329.20.1.1.1.0 | NodesnMspsTrapPrefix | |||
| 1.3.6.1.4.1.4329.20.1.1.1.0.251 | NotificationsnMspsTrapMSTPNewRootbridgeDetected | current | (M)STP new Rootbridge detected. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.252 | NotificationsnMspsTrapMSTPTopChange | current | (M)STP Topologychange detected. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1751 | NotificationsnMspsTrapWlanGeneric | current | The trap is sent whenever a generic WLAN event occurs. This trap can be disabled by setting all those snMspsReportEventTrap objects to false whose snMspsReport… | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1752 | NotificationsnMspsTrapWlanNewOverlapAp | current | New Overlap-AP found | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1753 | NotificationsnMspsTrapWlanOverlapApAgedOut | current | Overlap-AP aged out | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1754 | NotificationsnMspsTrapWlanWdsUp | current | WDS interface is up | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1755 | NotificationsnMspsTrapWlanWdsDown | current | WDS interface is down | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1756 | NotificationsnMspsTrapWlanRadarDetected | current | DFS radar interference event occured | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1757 | NotificationsnMspsTrapWlanRadarAgedOut | current | DFS channel aged out | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1758 | NotificationsnMspsTrapWlanRadiusAccessAccepted | current | RADIUS: access from a client accepted | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1759 | NotificationsnMspsTrapWlanRadiusAccessRejected | current | RADIUS: access request from a client rejected | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1761 | NotificationsnMspsTrapWlanAuthToAPFailed | current | Client: Authentication on AP failed | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1763 | NotificationsnMspsTrapWlanAssociatedToAP | current | Client: successfully associated to AP | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1764 | NotificationsnMspsTrapWlanAssociationToAPFailed | current | Client: Association failed | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1765 | NotificationsnMspsTrapWlanDisassociatedFromAP | current | Client: disassociated from AP | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1766 | NotificationsnMspsTrapWlanDisassociationFromAPFailed | current | Client: Disassotiation failed | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1767 | NotificationsnMspsTrapWlanAuthenticationFromClientFailed | current | AP: Client authentication failed | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1768 | NotificationsnMspsTrapWlanClientDeauthenticated | current | Client: deauthenticated from AP | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1769 | NotificationsnMspsTrapWlanClientAuthenticated | current | Client: authenticated to AP | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1770 | NotificationsnMspsTrapWlanClientAssociated | current | Client: associated to AP | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1771 | NotificationsnMspsTrapWlanAssociationFromClientFailed | current | AP: Client association failed | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1772 | NotificationsnMspsTrapWlanClientDisassociated | current | Client: disassociated from AP | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1773 | NotificationsnMspsTrapWlanDisassociationFromClientFailed | current | AP: Client disassociation failed | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1774 | NotificationsnMspsTrapWlanForcedRoaming | current | Forced Roaming event occured | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1781 | NotificationsnMspsTrapWlanIPCFMaxSta | current | iPCF: number of wireless clients too big for the cycle time | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1782 | NotificationsnMspsTrapWlanIPCFMaxCycleTime | current | iPCF: Max. PROFINET cycle time exceeded | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1783 | NotificationsnMspsTrapWlanIPCFMaxCyclicPollSize | current | Max. size of PROFINET cyclic poll exceeded (too many PROFINET devices) | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1851 | NotificationsnMspsTrapPowerLine1Down | current | Power down on line L1. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1852 | NotificationsnMspsTrapPowerLine1Up | current | Power up on line L1. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1853 | NotificationsnMspsTrapPowerLine2Down | current | Power down on line L2. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1854 | NotificationsnMspsTrapPowerLine2Up | current | Power up on line L2. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1855 | NotificationsnMspsTrapChangedFaultState | current | Device changed fault state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1856 | NotificationsnMspsTrapPoEDown | current | Power down on line L3 (PoE). | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1857 | NotificationsnMspsTrapPoEUp | current | Power up on line L3 (PoE). | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1860 | NotificationsnMspsTrapEnvData | current | EnvData Warnings. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1861 | NotificationsnMspsTrapServiceInformation | current | Serivce Information. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1862 | NotificationsnMspsTrapCLIScriptFileStatus | current | This trap is generated when a CLI script file was successfully loaded via TFTP and the file transfer was triggered through DHCP Options 66/67 | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1863 | NotificationsnMspsTrapConfigurationChange | current | Informs user when configuration is changed | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2101 | NotificationsnMspsTrapNTPInvalidConfiguration | current | Invalid NTP Configuration. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2102 | NotificationsnMspsTrapNTPWrongPacketLength | current | Received NTP Packet with wrong length. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2103 | NotificationsnMspsTrapNTPWrongSourceAddress | current | Received NTP Packet from wrong Source Address. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2104 | NotificationsnMspsTrapNTPWrongKeyId | current | Received NTP Packet with wrong or missing Key Id. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2105 | NotificationsnMspsTrapNTPAddAuthFail | current | Secure NTP failed to add authentication. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2106 | NotificationsnMspsTrapNTPVerifyAuthFail | current | Received NTP Packet failed authentication. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2107 | NotificationsnMspsTrapNTPKeyUpdate | current | SecureNTP Keys were updated. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1 | NodesnMspsCommon | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1 | NodesnMspsConfig | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.1 | ScalarsnMspsConfigLoginAuthentication | read-write | current | Configures the mechanism by which the user login has to be authenticated for accessing the GUI to manage the switch. Authentication is done either locally or i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2 | TablesnMspsConfigCtrlTable | not-accessible | current | A table to control device features like egress traffic control, stats collection, etc. either for the entire switch or for each interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1 | RowsnMspsConfigCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. In addition to that an entry with index '0' is created in this table by default. If 'snMspsCon… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.1 | ColumnsnMspsConfigCtrlIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. If any configuration is made in this table for the index '0', that configuration… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.2 | ColumnsnMspsConfigCtrlEgressStatus | read-write | current | Controls the transmission of egress traffic over this interface. This value for entry '0' controls the egress traffic over all interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.3 | ColumnsnMspsConfigCtrlStatsCollection | read-write | current | Enables or disables statistics collection for this interface. This value for entry '0' controls the stats collection for all interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.4 | ColumnsnMspsConfigCtrlStatus | read-write | current | Speficies the validity of the entry. If the 'Config Control Status' for entry '0' is made 'valid', then global control is chosen in the system. It signifies th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3 | TablesnMspsConfigRateCtrlTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1 | RowsnMspsConfigRateCtrlEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.1 | ColumnsnMspsConfigRateCtrlIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.2 | ColumnsnMspsConfigRateCtrlDLFLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf data that can be transmitted per second over this interface. The unit of data is given by … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.3 | ColumnsnMspsConfigRateCtrlBCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast data that can be transmitted per second over this interface. The unit of data is giv… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.4 | ColumnsnMspsConfigRateCtrlMCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast data that can be transmitted per second over this interface. The unit of data is giv… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.5 | ColumnsnMspsConfigRateCtrlPortRateLimit | read-write | current | Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.6 | ColumnsnMspsConfigRateCtrlPortBurstSize | read-write | current | Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.7 | ColumnsnMspsConfigRateCtrlUCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of unicast data that can be transmitted per second over this interface. The unit of data is given… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4 | TablesnMspsConfigAclRateCtrlTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. Chip-Dependent! |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1 | RowsnMspsConfigAclRateCtrlEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.1 | ColumnsnMspsConfigAclRateCtrlIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.2 | ColumnsnMspsConfigAclRateCtrlDLFLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf packets that can be transmitted per second over this interface. Setting this object to the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.3 | ColumnsnMspsConfigAclRateCtrlBCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.4 | ColumnsnMspsConfigAclRateCtrlMCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.5 | ColumnsnMspsConfigAclRateCtrlPortRateLimit | read-write | current | Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.6 | ColumnsnMspsConfigAclRateCtrlPortBurstSize | read-write | current | Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5 | TablesnMspsConfigPortCtrlTable | not-accessible | current | A table to control the port specific parameters of the device like speed, duplex mode, etc. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1 | RowsnMspsConfigPortCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.1 | ColumnsnMspsConfigPortCtrlIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.2 | ColumnsnMspsConfigPortCtrlMode | read-write | current | Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.3 | ColumnsnMspsConfigPortCtrlDuplex | read-write | current | Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'Por… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.4 | ColumnsnMspsConfigPortCtrlSpeed | read-write | current | Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.5 | ColumnsnMspsConfigPortCtrlFlowControl | read-write | current | Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.6 | ColumnsnMspsConfigPortCtrlRenegotiate | read-write | current | When configured as 'true', restarts autonegotiation on the interface. Once autonegotiation is restarted, the value of this object reverts to 'false'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.7 | ColumnsnMspsConfigPortCtrlMaxMacAddr | read-write | current | Specifies the maximum number of new MAC addresses that can be learnt over the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.8 | ColumnsnMspsConfigPortCtrlMaxMacAction | read-write | current | Specifies the action to be taken when the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'drop', the p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.9 | ColumnsnMspsConfigPortHOLBlockPrevention | read-write | current | Enables or disables Head-Of-Line Blocking prevention on a port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6 | NodesnMspsConfigMirror | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.1 | ScalarsnMspsConfigMirrorStatus | read-write | current | This object is used to enable/disable mirroring feature in hardware. When set to 'disabled (1)', all mirroring configurations will be removed from hardware. Wh… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.2 | ScalarsnMspsConfigMirrorToPort | read-write | current | Specifies the port to which the active mirrored traffic controlled by snMspsConfigMirrorCtrlTable is to be copied. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3 | TablesnMspsConfigMirrorCtrlTable | not-accessible | current | A table to control mirroring features for each interface in the switch. Parameters in this table are valid only when the 'snMspsConfigMirrorStatus' for the swi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1 | RowsnMspsConfigMirrorCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.1 | ColumnsnMspsConfigMirrorCtrlIndex | not-accessible | current | The interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.2 | ColumnsnMspsConfigMirrorCtrlIngressMirroring | read-write | current | Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.3 | ColumnsnMspsConfigMirrorCtrlEgressMirroring | read-write | current | Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.4 | ColumnsnMspsConfigMirrorCtrlStatus | read-write | current | Specifies the validity of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6 | TablesnMspsConfigMirrorCtrlExtnTable | not-accessible | current | This Table is used to configure advanced mirroring features like - Port Based Mirroring: - flow based mirroring - vlan based mirroring Following are the config… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1 | RowsnMspsConfigMirrorCtrlExtnEntry | not-accessible | current | An entry appears in this table for each session in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.1 | ColumnsnMspsConfigMirrorCtrlExtnSessionIndex | not-accessible | current | The index of the mirroring session for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.2 | ColumnsnMspsConfigMirrorCtrlExtnMirrType | read-write | current | This object tells the type of mirroring this session supports. This object needs to be set before doing any configuration for a mirroring session |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.3 | ColumnsnMspsConfigMirrorCtrlExtnRSpanStatus | read-write | current | This object indicates session is enabled or disabled for Remote monitoring. If set as 'source-rspan-vlanid' indicates that the session is enabled for Remote mo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.4 | ColumnsnMspsConfigMirrorCtrlExtnRSpanVlanId | read-write | current | Vlan Id used for Remote monitoring for this session. If snMspsConfigMirrorCtrlExtnRSpanStatus is set to disabled, then this object will have an invalid value (… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.5 | ColumnsnMspsConfigMirrorCtrlExtnRSpanContext | read-write | current | Specifies the Context Id to which the RSpan Vlan belongs. Value '0' mean this object is not considered for this mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.6 | ColumnsnMspsConfigMirrorCtrlExtnStatus | read-create | current | This object indicates the status of the entry. The entry can be made active only if snMspsConfigMirrorCtrlExtnMirrType is configured and source and destination… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.7 | ColumnsnMspsConfigMirrorCtrlExtnHardwareIndex | read-only | current | Specifies the Hardware Index associated with this mirroring session. Value '0' mean this object is not applicable for this mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.8 | ColumnsnMspsConfigMirrorCtrlExtnERTMDestIp | read-create | current | This object indicates the destination IP address of the encapsulated ERTM packet. In case of ERTM Mirroring the mirrored packet will be encapsulated. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7 | TablesnMspsConfigMirrorCtrlExtnSrcTable | not-accessible | current | A table to configure list of source entities for mirroring sessions |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1 | RowsnMspsConfigMirrorCtrlExtnSrcEntry | not-accessible | current | An entry appears in this table for each mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1.1 | ColumnsnMspsConfigMirrorCtrlExtnSrcId | not-accessible | current | Specifies the source id which participates in a mirroring session. For Port based mirroring this object can be port IfIndex. To mirror Tunnel and Trunk ports t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1.2 | ColumnsnMspsConfigMirrorCtrlExtnSrcCfg | read-write | current | This object is used to create/delete a source entry for a session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1.3 | ColumnsnMspsConfigMirrorCtrlExtnSrcMode | read-write | current | Provides control to set the mode of mirroring. It can be ingerss,Egress or Both. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8 | TablesnMspsConfigMirrorCtrlExtnSrcVlanTable | not-accessible | current | A table to configure list of vlan source entities for mirroring sessions |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1 | RowsnMspsConfigMirrorCtrlExtnSrcVlanEntry | not-accessible | current | An entry appears in this table for each mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.1 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanContext | not-accessible | current | Specifies the Context Id to which the source entity belongs, this is used in case of specifying vlan as source. Value '-1' mean this object is not considered f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.2 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanId | not-accessible | current | Specifies the Vlan id which participates in a mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.3 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanCfg | read-write | current | This object is used to create/delete a vlan entry for a session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.4 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanMode | read-write | current | Provides control to set the mode of mirroring. It can be ingerss,Egress or Both. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9 | TablesnMspsConfigMirrorCtrlExtnDestinationTable | not-accessible | current | A table to configure list of destination entities |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9.1 | RowsnMspsConfigMirrorCtrlExtnDestinationEntry | not-accessible | current | An entry appears in this table for each destination entity in a mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9.1.1 | ColumnsnMspsConfigMirrorCtrlExtnDestination | not-accessible | current | Specifies the destination port id which participates in a mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9.1.2 | ColumnsnMspsConfigMirrorCtrlExtnDestCfg | read-write | current | This object is used to create/delete a destination entry for a session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7 | NodesnMspsConfigNetwork | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1 | TablesnMspsConfigL2FilterTable | not-accessible | current | A table to configure L2 filter rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1 | RowsnMspsConfigL2FilterEntry | not-accessible | current | Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.1 | ColumnsnMspsConfigL2FilterNo | not-accessible | current | L2 Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.2 | ColumnsnMspsConfigL2FilterPriority | read-write | current | The priority of the L2 filter can be used to decide which filter rule is applicable when Higher value of 'filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.3 | ColumnsnMspsConfigL2FilterEtherType | read-write | current | The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.4 | ColumnsnMspsConfigL2FilterProtocolType | read-write | current | Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.5 | ColumnsnMspsConfigL2FilterDstMacAddr | read-write | current | Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.6 | ColumnsnMspsConfigL2FilterSrcMacAddr | read-write | current | Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.7 | ColumnsnMspsConfigL2FilterVlanId | read-write | current | Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.8 | ColumnsnMspsConfigL2FilterInPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.9 | ColumnsnMspsConfigL2FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.10 | ColumnsnMspsConfigL2FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.11 | ColumnsnMspsConfigL2FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.12 | ColumnsnMspsConfigL2FilterOutPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets egress at Ports in this list. If the Out port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.13 | ColumnsnMspsConfigL2FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2 | TablesnMspsConfigL4SwitchingFilterTable | not-accessible | current | A table to L4 Switching rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1 | RowsnMspsConfigL4SwitchingFilterEntry | not-accessible | current | Each entry in this table is a L4 Switching rule. Index to the table is L4 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.1 | ColumnsnMspsConfigL4SwitchingFilterNo | not-accessible | current | L4 Switching Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.2 | ColumnsnMspsConfigL4SwitchingProtocol | read-write | current | The type of protocol to be checked against the packet. The default value is 255. If the value is 255, it means that the protocol type can be anything and it wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.3 | ColumnsnMspsConfigL4SwitchingPortNo | read-write | current | The Layer 4 port no. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.4 | ColumnsnMspsConfigL4SwitchingCopyToPort | read-write | current | This object is Port to which the packet would be switched |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.5 | ColumnsnMspsConfigL4SwitchingFilterStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3 | TablesnMspsConfigIpAuthMgrTable | not-accessible | current | A table to configure IP authorized managers in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1 | RowsnMspsConfigIpAuthMgrEntry | not-accessible | current | IP Authorized managers, which restricts configuration from specific workstations only, provides additional security. Each entry in this table represents rules … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.1 | ColumnsnMspsConfigIpAuthMgrIpAddr | not-accessible | current | Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.2 | ColumnsnMspsConfigIpAuthMgrIpMask | not-accessible | current | Specifies the IP address mask to be applied on snMspsConfigIpAuthMgrIpAddr. Value 0.0.0.0 indicates mask for 'Any Manager'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.3 | ColumnsnMspsConfigIpAuthMgrPortList | read-write | current | Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch throug… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.4 | ColumnsnMspsConfigIpAuthMgrVlanList | read-write | current | Specifies the Vlan's in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.5 | ColumnsnMspsConfigIpAuthMgrOOBPort | read-write | current | Specifies whether the authorized manager can access the switch through OOB Port By default the manager is denied access to reside on OOB Interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.6 | ColumnsnMspsConfigIpAuthMgrAllowedServices | read-write | current | Specifies the allowed services through which the authorized manager can access the switch. This object takes bit mask values. The services represented by each … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.7 | ColumnsnMspsConfigIpAuthMgrRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.8 | ColumnsnMspsConfigIpAuthMgrCreationOrder | read-write | current | Specifies creation order of the rules |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.4 | ScalarsnMspsConfigIpAuthMgrEnabled | read-write | current | Enable/Disable Ip Authorized Manager. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.5 | ScalarsnMspsConfigResetTopologyChgCounter | read-write | current | Reset topology change counters for RSTP and MSTP depending on the stack running. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10 | TablesnMspsConfigIpvxAuthMgrTable | not-accessible | current | A table to configure Ipvx(ipv4 and ipv6) authorized managers in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1 | RowsnMspsConfigIpvxAuthMgrEntry | not-accessible | current | Ipvx Authorized managers, which restricts configuration from specific workstations only, provides additional security. Each entry in this table represents rule… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.1 | ColumnsnMspsConfigIpvxAuthMgrAddrType | not-accessible | current | The IP address type of SnMspsConfigIpvxAuthMgrEntry. This value determines the type for snMspsConfigIpvxAuthMgrAddr and snMspsConfigIpvxAuthMgrAddrLen. ipv4(1)… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.2 | ColumnsnMspsConfigIpvxAuthMgrAddr | not-accessible | current | Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 or :: indicates 'Any Manager'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.3 | ColumnsnMspsConfigIpvxAuthMgrAddrLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the snMspsConfigIpvxAuthMgrAddr before being compared to the value in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.4 | ColumnsnMspsConfigIpvxAuthMgrPortList | read-write | current | Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch throug… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.5 | ColumnsnMspsConfigIpvxAuthMgrVlanList | read-write | current | Specifies the Vlan's in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.6 | ColumnsnMspsConfigIpvxAuthMgrOOBPort | read-write | current | Specifies whether the authorized manager can access the switch through OOB Port By default the manager is denied access to reside on OOB Interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.7 | ColumnsnMspsConfigIpvxAuthMgrAllowedServices | read-write | current | Specifies the allowed services through which the authorized manager can access the switch. This object takes bit mask values. The services represented by each … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.8 | ColumnsnMspsConfigIpvxAuthMgrCreationOrder | read-write | current | Specifies creation order of the rules |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.9 | ColumnsnMspsConfigIpvxAuthMgrRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.8 | ScalarsnMspsConfigIpVlanId | read-write | current | Inband ports VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned for the agent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.9 | ScalarsnMspsConfigAgentReceiveOnAllKnownVLANs | read-write | current | Setting AgentReceiveOnAllKnownVLANs to Enable(1) enables the reception of IP traffic for the agent on all VLANs. This means the agent accepts incoming connecti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.10 | ScalarsnMspsConfigVlan0Aware | read-write | current | The VLAN ID of VLAN which is to be in transparent mode. Zero (0) indicates that no VLAN is in transparent mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.11 | ScalarsnMspsConfigBootIntegrityCheck | read-write | current | Enable / Disable the boot integrity check at the start up. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12 | TablesnMspsConfigPortCtrlConfigurationTable | not-accessible | current | A table to control the port specific parameters of the device like speed, duplex mode, etc. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1 | RowsnMspsConfigPortCtrlConfigurationEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.1 | ColumnsnMspsConfigPortCtrlConfigurationIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.2 | ColumnsnMspsConfigPortCtrlConfigurationMode | read-write | current | Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.3 | ColumnsnMspsConfigPortCtrlConfigurationDuplex | read-write | current | Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'Por… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.4 | ColumnsnMspsConfigPortCtrlConfigurationSpeed | read-write | current | Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.5 | ColumnsnMspsConfigPortCtrlConfigurationFlowControl | read-write | current | Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.6 | ColumnsnMspsConfigPortCtrlConfigurationRenegotiate | read-write | current | When configured as 'true', restarts autonegotiation on the interface. Once autonegotiation is restarted, the value of this object reverts to 'false'. The curre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.7 | ColumnsnMspsConfigPortCtrlConfigurationMaxMacAddr | read-write | current | Specifies the maximum number of new MAC addresses that can be learnt over the interface. The current value of this MIB object represents only configuration sta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.8 | ColumnsnMspsConfigPortCtrlConfigurationMaxMacAction | read-write | current | Specifies the action to be taken when the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'drop', the p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.9 | ColumnsnMspsConfigPortCtrlConfigurationHOLBlockPrevention | read-write | current | Enables or disables Head-Of-Line Blocking prevention on a port. The current value of this MIB object represents only configuration state. The real state of thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15 | TablesnMspsConfigRateCtrlLimitTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15.1 | RowsnMspsConfigRateCtrlLimitEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15.1.1 | ColumnsnMspsConfigRateCtrlLimitIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15.1.2 | ColumnsnMspsConfigRateCtrlLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf, multicast and broadcast data that can be transmitted per second over this interface. The … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.16 | ScalarsnMspsConfigRateCtrlUnit | read-only | current | Defines unit of rate limiting values in corresponding entry from snMspsConfigRateCtrlTable. It can be treated either in packet per second or kilobit per second. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.20 | ScalarsnMspsConfigSwitchAgingEnable | read-write | current | Enable/Disable auto-aging functionality of the learning table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.25 | ScalarsnMspsConfigSwitchSnifferBarrierEnable | read-write | current | Enable/Disable Monitor Barrier functionality. If disabled the mirror destination port is also part of the switching engine |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.27 | ScalarsnMspsConfigSwitchTime | read-write | current | Show/Set -MM/DD/YYYY hh:mm:ss- date and time of the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.28 | ScalarsnMspsConfigurationSaveMode | read-write | current | When set to 'autosave(2)', all nonvolatile configuration parameters are saved automaticly to flash after configuration changes. In 'trialmode (1)' save must be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.29 | ScalarsnMspsInitiateConfigSave | read-write | current | When set as 'true' switch configurations save operation is initiated. As soon as the configuration save operation is completed, the value of this object revert… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.30 | ScalarsnMspsConfigLastSynchronisationTime | read-only | current | MM/DD/YYYY hh:mm:ss- This is the time when the system time is last synchronized. It return zero length value if the system time is not yet synchronized. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.31 | ScalarsnMspsConfigChangesSaved | read-only | current | Value 'true' means there are no configuration changes that are not saved. Otherwise it will have the value 'false'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.32 | ScalarsnMspsConfigurationAutoRestartTimer | read-write | current | When setting to time interval in seconds, device will perform restart automatically after the time interval is expired. Setting 0 will cancel any timer, which … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.33 | ScalarsnMspsConfigurationAutoRestartBackup | read-write | current | Configure a configuration backup which will be restored before scheduled restart performed. 0 means no backup selected |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.34 | ScalarsnMspsConfigMinimumFileVersion | read-write | current | Scalance Configuration File contains one of the following items to ensure integrity based on the version. v1.0 - 4 bytes of (non-encrypted) checksum. v2.0 - En… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.35 | ScalarsnMspsEnhancedPassiveListeningCompatibility | read-write | current | Enables or disables Enhance Passive Listening Compatibility mode on this device. If port wise configuration is supported, the port specific object <snMspsPortE… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.41 | ScalarsnMspsConfigVrrpAcceptPing | read-write | current | Enable/disable ability to accept pings to associated ip addresses |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.60 | ScalarsnMspsOperLoginPasswordPolicy | read-only | current | Shows the password policy which is enforced to users when determining their password. Low - password should contain minimum 6 characters, Medium - not supporte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.61 | ScalarsnMspsConfigLoginPasswordPolicy | read-write | current | Sets the password policy which is enforced to users when determining their password. Low - password should contain minimum 6 characters, Medium - not supported… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.62 | NodesnMspsConfigCustomLoginPasswordPolicy | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.62.2 | ScalarsnMspsLoginMinimumPasswordLength | read-write | current | Minimum Password Length that can be set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.62.5 | ScalarsnMspsLoginPasswordNumericCharacters | read-write | current | Minimum Numeric Characters that a password contains |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.62.10 | ScalarsnMspsLoginPasswordSpecialCharacters | read-write | current | Minimum Special Characters that a password contains |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.62.13 | ScalarsnMspsLoginPasswordUpperCaseLetter | read-write | current | Minimum Uppercase Letters that a password contains |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.62.16 | ScalarsnMspsLoginPasswordLowerCaseLetter | read-write | current | Minimum Lowercase Letters that a password contains |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65 | NodesnMspsLoginUsers | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5 | TablesnMspsLoginUsersTable | not-accessible | current | This table contains the login usernames and privileges, which are currently created. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1 | RowsnMspsLoginUsersTableEntry | not-accessible | current | user table entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1.1 | ColumnsnMspsLoginUserName | not-accessible | current | User Name which is used as index of the snMspsLoginUserTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1.2 | ColumnsnMspsLoginUserPrivilege | read-only | current | User Privilege |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1.3 | ColumnsnMspsLoginUserRemoteAccess | read-only | current | Remote Access Filter . Value 0 means its allowed to access. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100 | NodesnMspsConfigBackup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10 | TablesnMspsConfigBackupTable | not-accessible | current | A table to display and to control the configuration pack backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1 | RowsnMspsConfigBackupEntry | not-accessible | current | An entry appears in this table for each configuration pack. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.1 | ColumnsnMspsConfigBackupIndex | not-accessible | current | The auxiliary number of corresponding entry representing settings of each config backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.4 | ColumnsnMspsConfigBackupFileName | read-create | current | The file name of configuration backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.7 | ColumnsnMspsConfigBackupFileSize | read-only | current | The file size in kilobytes of configuration backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.50 | ColumnsnMspsConfigBackupOperation | read-write | current | This is a trigger and status variable. Write access using restore(1), initiates restore of corresponding backup configuration. After the operation is completed… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.100 | ColumnsnMspsConfigBackupStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row in snMspsConfigBackupTable. The new row cannot be activated as long as snMspsConf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.101 | ScalarsnMspsConfigSourceIpVlanId | read-write | current | Configures the LoopBack IP interface VLAN ID (1 to 4094). Non-Zero IPv4/IPv6 Address of this LoopBack interface will be used as Source Address for management c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.105 | ScalarsnMspsConfigUniqueVlanIfMacAddress | read-write | current | when enabled the MAC address of the VLAN interface depends from the first port of the VLAN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.201 | ScalarsnMspsConfigNetworkFiltering | read-write | current | Enable/disable ability to identify and temporarily filter source mac-addresses of the incoming network traffic that cause CPU congestion. Traffic from identifi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.202 | TablesnMspsConfigNetworkFilterWhiteListTable | not-accessible | current | White List entries for which Source MAC-Address blocking will not be done during CPU congestion. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.202.1 | RowsnMspsConfigNetworkFilterWhiteListEntry | not-accessible | current | White List entries for which Source MAC-Address blocking will not be done during CPU congestion. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.202.1.1 | ColumnsnMspsConfigNetworkFilterWhiteListMac | read-only | current | The source MAC address in a frame for which blocking should not be done during CPU congestion. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.202.1.5 | ColumnsnMspsConfigNetworkFilterWhiteListRowStatus | read-write | current | The row status of the entry. active (1)- indicates that the conceptual row with all columns is available for use by the managed device. notInService (2) - indi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.301 | ScalarsnMspsStartupConfigChecksum | read-only | current | The checksum value of the startup configuration |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.302 | ScalarsnMspsConfigSerialConsoleAccess | read-write | current | Enable/disable Serial Console Access. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2 | NodesnMspsGeneral | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.5 | ScalarsnMspsGeneralDeviceType | read-only | current | Device Type of current product. This value is the part of fully-qualified domain name, which is stored in sys-Name. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.10 | ScalarsnMspsGeneralDeviceGroup | read-only | current | The group name of the device, which is used as a part of the cplug device's identification data |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20 | TablesnMspsGeneralHwVersionTable | not-accessible | current | This table contains version informations of all hardware (basic device and extension cards), which are currently available on the device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1 | RowsnMspsGeneralHwVersionEntry | not-accessible | current | An entry appears in this table for each hardware in the system, which has a MLFB number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.1 | ColumnsnMspsGeneralHwVersionTableIndex | not-accessible | current | This index correlates with entPhysicalIndex from entPhysicalTable (ENTITY-MIB). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.2 | ColumnsnMspsGeneralHwType | read-only | current | The type of hardware in readable format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.3 | ColumnsnMspsGeneralHwName | read-only | current | The name of hardware in readable format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.4 | ColumnsnMspsGeneralHwRevision | read-only | current | The number of hardware revision. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.5 | ColumnsnMspsGeneralHwOrderId | read-only | current | Order ID of hardware. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25 | TablesnMspsGeneralSwVersionTable | not-accessible | current | This table contains version informations of software, which is currently running on relevant hardware (basic device and extension cards). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1 | RowsnMspsGeneralSwVersionEntry | not-accessible | current | An entry appears in this table for each software running in the system. Since the same kinds of software could run on different hardware, which is available on… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.1 | ColumnsnMspsGeneralSwVersionTableIndex | not-accessible | current | The numerical index of software, which is available on relevant hardware. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.2 | ColumnsnMspsGeneralSwType | read-only | current | The type of software in readable format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.3 | ColumnsnMspsGeneralSwRevision | read-only | current | The number of software revision. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.4 | ColumnsnMspsGeneralSwDate | read-only | current | The revision date of software. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.5 | ColumnsnMspsGeneralSwDescription | read-only | current | The description of software. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3 | NodesnMspsVlan | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4 | TablesnMspsDot1qTpGroupTable | not-accessible | current | A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of po… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1 | RowsnMspsDot1qTpGroupEntry | not-accessible | current | Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and conta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1.1 | ColumnsnMspsDot1qTpGroupAddress | not-accessible | current | The destination Group MAC address in a frame to which this entry's filtering information applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1.2 | ColumnsnMspsDot1qTpPort | not-accessible | current | The port number of the port for which this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1.3 | ColumnsnMspsDot1qTpGroupIsLearnt | read-only | current | Indicates whether the port is statically configured or a dynamic member of the Group address learnt through GMRP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.8 | TablesnMspsDot1qVlanStaticPortConfigTable | not-accessible | current | A table containing the information of tagged, untagged and forbidden ports for each VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.8.1 | RowsnMspsDot1qVlanStaticPortConfigEntry | not-accessible | current | Forwarding information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.8.1.1 | ColumnsnMspsDot1qVlanStaticPort | read-write | current | Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addTagged' - to add the port in the tagged portlist.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.9 | TablesnMspsDot1qStaticAllowedToGoTable | not-accessible | current | A table containing the information of AllowedToGoTo ports for each static unicast entry. This table maintains context ID as one more index to support Multiple … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.9.1 | RowsnMspsDot1qStaticAllowedToGoEntry | not-accessible | current | Information about a port, Whether it is an AllowedToGoTo member or not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.9.1.1 | ColumnsnMspsDot1qStaticAllowedIsMember | read-write | current | Indicates whether the port is an allowedToGoTo member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.10 | TablesnMspsMIDot1qStaticUnicastExtnTable | not-accessible | current | A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management spe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.10.1 | RowsnMspsMIDot1qStaticUnicastExtnEntry | not-accessible | current | Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.10.1.1 | ColumnsnMspsMIDot1qStaticConnectionIdentifier | read-write | current | This object is to associate the backbone MAC address of the peer backbone edge bridge with customer Mac addresses that can be reached through the peer backbone… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.11 | TablesnMspsDot1qForwardAllStatusTable | not-accessible | current | This table is used to maintain the status of static and forbidden portlist required in ForwardAll table for VLAN. This table maintains context ID as one more i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.11.1 | RowsnMspsDot1qForwardAllStatusEntry | not-accessible | current | An entry to specify the status of static and forbidden portlist in ForwardAll Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.11.1.1 | ColumnsnMspsDot1qForwardAllRowStatus | read-create | current | This object indicates the status of the PortLists (Static, Forbidden) used in the forwarding information of a VLAN (ForwardAll). To fill the static and forbidd… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.12 | TablesnMspsDot1qForwardAllPortConfigTable | not-accessible | current | A table containing the forwarding information of static ports and forbidden ports for each VLAN. This table maintains context ID as one more index to support M… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.12.1 | RowsnMspsDot1qForwardAllPortConfigEntry | not-accessible | current | Forwarding information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.12.1.1 | ColumnsnMspsDot1qForwardAllPort | read-write | current | Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addMember' - to add the port in the static member-li… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.15 | TablesnMspsDot1qForwardUnregStatusTable | not-accessible | current | This table is used to maintain the status of static and forbidden portlist required in ForwardUnreg table for VLAN. This table maintains context ID as one more… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.15.1 | RowsnMspsDot1qForwardUnregStatusEntry | not-accessible | current | An entry to specify the status of static and forbidden portlist in ForwardUnreg table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.15.1.1 | ColumnsnMspsDot1qForwardUnregRowStatus | read-create | current | This object indicates the status of the PortLists (Static, Forbidden) used in the forwarding information of a VLAN (ForwardUnreg). To fill the static and forbi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.16 | TablesnMspsDot1qForwardUnregPortConfigTable | not-accessible | current | A table containing the information of static ports and forbidden ports to which forwarding of multicast group-addressed frames for which there is no more speci… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.16.1 | RowsnMspsDot1qForwardUnregPortConfigEntry | not-accessible | current | Forwarding information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.16.1.1 | ColumnsnMspsDot1qForwardUnregPort | read-write | current | Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addMember' - to add the port in the static member-li… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.18 | TablesnMspsDot1qStaticMcastPortTable | not-accessible | current | A table containing egress and forbidden ports for static multicast entry. This table maintains context ID as one more index to support Multiple Instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.18.1 | RowsnMspsDot1qStaticMcastPortEntry | not-accessible | current | Information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.18.1.1 | ColumnsnMspsDot1qStaticMcastPort | read-write | current | Indicates whether the port is a member or a forbidden member in the static multicast entry. 'addMember' - to add the port in the egress member-list. 'addForbid… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19 | TablesnMspsDot1qVlanWildCardTable | not-accessible | current | Wild card vlan (Id : 0xFFF) static filtering information will be used for all Vlans for which there is no specific Static filtering exists in dot1qStaticUnicas… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1 | RowsnMspsDot1qVlanWildCardEntry | not-accessible | current | WildCard vlan filtering Information configured into device by management to which frames received from any port and for any vlan containing this wild card mac … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1.1 | ColumnsnMspsDot1qVlanWildCardMacAddress | not-accessible | current | The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Unicast, Multicast or Broadcas… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1.2 | ColumnsnMspsDot1qVlanWildCardEgressPorts | read-write | current | The set of ports to which frames received from a specific port and destined for dot1qFutureVlanWildCardMacAddress address must be forwarded, if there is no spe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1.3 | ColumnsnMspsDot1qVlanWildCardRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.20 | TablesnMspsMIDot1qVlanWildCardPortTable | not-accessible | current | A Table containing ports to which frames received from a specific port and destined for snMspsMIDot1qVlanWildCardMacAddress must be forwarded, if there is no s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.20.1 | RowsnMspsMIDot1qVlanWildCardPortEntry | not-accessible | current | WildCard vlan filtering Information configured into device by management specifying set of ports to which frames received from any port and for any vlan contai… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.20.1.1 | ColumnsnMspsMIDot1qVlanIsWildCardEgressPort | read-write | current | Indicates whether the port is an egress port of wildcard entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.25 | ScalarsnMspsDot1qVlanStatus | read-write | current | The administrative status requested by management for the Vlan feature. The value enabled(1) indicates that Vlan should be enabled in the device on all ports. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.26 | ScalarsnMspsDot1qVlanMacBasedOnAllPorts | read-write | current | This object is only used to enable/disable the mac based type on all ports of dot1qVlanPortMacBasedClassification |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.27 | ScalarsnMspsDot1qVlanPortProtoBasedOnAllPorts | read-write | current | This object is only used to enable/disable the port protocol based type on all ports of snMspsDot1qVlanPortPortProtoBasedClassification |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.29 | ScalarsnMspsDot1qVlanShutdownStatus | read-write | current | The administrative shutdown status requested by management for Vlan The value true(1) indicates that Vlan should be shutdown in the device on all ports. All me… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.30 | ScalarsnMspsDot1qVlanBaseBridgeMode | read-write | current | This object indicates base bridge mode of the device. Setting the value to transparent mode will make switch behave according to IEEE 802.1D implementation. Se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.33 | ScalarsnMspsDot1qVlanLearningMode | read-write | current | The Type of VLAN learning mode. When the object value is modified, the static fid-vlan mappings and static unicast entries need to be reconfigured. Static unic… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.34 | ScalarsnMspsDot1qVlanHybridTypeDefault | read-write | current | The default learning mode of the switch if dot1qVlanLearningMode is hvl (3). When the object value is modified, the static fid-vlan mappings and static unicast… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.35 | ScalarsnMspsDot1qVlanOperStatus | read-only | current | The operational status of the Vlan module. The value enabled(1) indicates that Vlan module is currently enabled in the device. The value disabled(2) indicates … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.36 | ScalarsnMspsDot1qGvrpOperStatus | read-only | current | The operational status of the GVRP module. The value enabled(1) indicates that GVRP module is currently enabled in the device. The value disabled(2) indicates … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.37 | ScalarsnMspsDot1qGmrpOperStatus | read-only | current | The operational status of the GMRP module. The value enabled(1) indicates that GMRP module is currently enabled in the device. The value disabled(2) indicates … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41 | TablesnMspsDot1qVlanPortTable | not-accessible | current | Table containing the port type information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1 | RowsnMspsDot1qVlanPortEntry | not-accessible | current | Entry indicating the type of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.1 | ColumnsnMspsDot1qVlanPort | not-accessible | current | The port number of the port for which this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.2 | ColumnsnMspsDot1qVlanPortType | read-write | current | The type of the port is by default hybrid port. When configured as access port, the port can accept and send only untagged frames. When configured as a trunk p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.3 | ColumnsnMspsDot1qVlanPortMacBasedClassification | read-write | current | Object to expilicitly enable/disable the Mac based Classification on port. This can be independently set without any dependency in available configuration of s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.4 | ColumnsnMspsDot1qVlanPortPortProtoBasedClassification | read-write | current | Object to expilicitly enable/disable the port and protocol Classification on port. This can be independently set without any dependency in available configurat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.5 | ColumnsnMspsDot1qVlanFilteringUtilityCriteria | read-write | current | Based on this object, learning on a port is decided. If default filtering utility Criteria is selected on a port, then learning of source mac from a received p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.6 | ColumnsnMspsDot1qVlanPortProtected | read-write | current | The Split Horizon property of the port. If set to true, frames that are received on any other port that has the same property set to true, will not be forwarde… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.7 | ColumnsnMspsDot1qVlanPortSubnetBasedClassification | read-write | current | Object to expilicitly enable/disable the Subnet based Vlan Classification on port. This can be independently set without any dependency in available configurat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42 | TablesnMspsDot1qVlanPortMacMapTable | not-accessible | current | A table that contains information on Vlan-MAC address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1 | RowsnMspsDot1qVlanPortMacMapEntry | not-accessible | current | Entry that contains Vlan-MAC address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.1 | ColumnsnMspsDot1qVlanPortMacMapAddr | not-accessible | current | The Mac address for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.2 | ColumnsnMspsDot1qVlanPortMacMapVid | read-write | current | The Vlan to which the mac address of this entry is mapped to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.3 | ColumnsnMspsDot1qVlanPortMacMapName | read-write | current | The name given to the mac-vlan entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.4 | ColumnsnMspsDot1qVlanPortMacMapMcastBcastOption | read-write | current | Configurable option for discarding/allowing Multicast/Broadcast Untagged frames. The value allow (1) indicates that Multicast/Broadcast frames with source Mac … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.5 | ColumnsnMspsDot1qVlanPortMacMapRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43 | TablesnMspsDot1qVlanFidMapTable | not-accessible | current | This table contains information about the Filtering database identifier (FID) used by vlan's to make forwarding decisions. Vlan's can be mapped to use the same… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43.1 | RowsnMspsDot1qVlanFidMapEntry | not-accessible | current | Entry mapping VlanId to Filtering database id. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43.1.1 | ColumnsnMspsDot1qVlanIndex | read-only | current | VLAN ID for which filtering database information is available. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43.1.2 | ColumnsnMspsDot1qVlanFid | read-write | current | The Filtering database id (FID) that will be used by the vlan. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44 | TablesnMspsDot1qVlanCounterTable | not-accessible | current | The table contains the statistics on a per VLAN basis. It contains number of unicast, broadcast and unknown unicast packets flooded per VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1 | RowsnMspsDot1qVlanCounterEntry | not-accessible | current | The entry contains the VLAN statistics |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.1 | ColumnsnMspsDot1qVlanCounterRxUcast | read-only | current | Number of unicast packets received in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.2 | ColumnsnMspsDot1qVlanCounterRxMcastBcast | read-only | current | Number of multicast/broadcast packets received in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.3 | ColumnsnMspsDot1qVlanCounterTxUnknUcast | read-only | current | Number of unknown unicast packets flooded in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.4 | ColumnsnMspsDot1qVlanCounterTxUcast | read-only | current | Number of known unicast packets forwarded in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.5 | ColumnsnMspsDot1qVlanCounterTxBcast | read-only | current | Number of broadcast packets forwarded in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45 | TablesnMspsDot1qVlanUnicastMacControlTable | not-accessible | current | A table containing per VLAN Unicast MAC address control information. The control information includes the status of unicast MAC address learning as well as res… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1 | RowsnMspsDot1qVlanUnicastMacControlEntry | not-accessible | current | Information controlling the number of distinct unicast MAC addresses that can be learnt by a VLAN depending on whether learning is enabled or disabled for the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1.1 | ColumnsnMspsDot1qVlanUnicastMacLimit | read-write | current | The Limiting value on the number of distinct unicast MAC addresses learnt in a VLAN. The lower limit and upper limit value that can be SET for this object is d… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1.2 | ColumnsnMspsDot1qVlanAdminMacLearningStatus | read-write | current | A Truth value used to configure the unicast MAC learning Admin status for the VLAN to either be enabled (1) or disabled (2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1.3 | ColumnsnMspsDot1qVlanOperMacLearningStatus | read-only | current | A Truth value indicating the unicast MAC learning enabled/disabled Operational status for the specified VLAN. If the VLAN does not have any member port, then t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46 | TablesnMspsDot1qVlanTpFdbTable | not-accessible | current | An extention to the dot1qTpFdbTable contains information about unicast entries only learned via pseudowire for which the device has forwarding and/or filtering… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1 | RowsnMspsDot1qVlanTpFdbEntry | not-accessible | current | Information about the pseudowire on which MAC address was learned |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1.1 | ColumnsnMspsDot1qVlanTpFdbPw | read-only | current | Either the value '0', or the pseudowire number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress h… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1.2 | ColumnsnMspsDot1qTpOldFdbPort | read-only | current | This object is useful for generating the source relearning trap. When a get is performed on this object, it returns the value of Zero(0), so that the device wa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1.3 | ColumnsnMspsDot1qConnectionIdentifier | read-only | current | This object is to associate the backbone MAC address of the peer backbone edge brige with customer Mac addresses that can be reached through the peer backbone … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47 | TablesnMspsDot1qVlanPriorityTable | not-accessible | current | A table to configure VLAN priorization |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1 | RowsnMspsDot1qVlanPriorityEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1.1 | ColumnsnMspsDot1qVlanPriorityVid | not-accessible | current | VLAN-ID |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1.4 | ColumnsnMspsDot1qVlanPriorityEnabled | read-write | current | Enable/Disable forcing of a given priority for all frames received on a certain VLAN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1.7 | ColumnsnMspsDot1qVlanPriority | read-write | current | Priority that is forced for all frames received on a certain VLAN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1.11 | ColumnsnMspsDot1qVlanPriorityUpdateTagPriority | read-write | current | Enable/Disable changing VLAN tag priority field with the value 'snMspsDot1qVlanPriority' on egress packet for all frames received on a certain VLAN only if 'sn… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48 | NodesnMspsDot1qVlanExt | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20 | TablesnMspsDot1qStVlanExtTable | not-accessible | current | An extension to dot1qVlanStaticTable VLAN table. This table contains the extended Vlan Specific features, Private Vlan (PVLAN) and Vlan-0-Tunnel related config… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1 | RowsnMspsDot1qStVlanExtEntry | not-accessible | current | Each entry specifies the extended Vlan feature configuration done for a given Vlan. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1.1 | ColumnsnMspsDot1qStVlanPVlanType | read-write | current | This object identifies the Private vlan type for this vlan. normal - Vlan does not belong to any Private VLAN domain. primary - Primary vlan in a Private VLAN … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1.2 | ColumnsnMspsDot1qStVlanPrimaryVid | read-write | current | This object identifies the primary vlan assoicated with this vlan. For primary and normal vlans, this object will have the value zero and configuring this obje… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1.5 | ColumnsnMspsDot1qVlan0Tunnel | read-write | current | Indicates whether Vlan-0 Tunnelling is enabled or disabled on this VLAN. snMspsDot1qVlan0Tunnel if set to `enabled`, then VLAN-0 tag received will be sent out … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1.11 | ColumnsnMspsDot1qStVlanDHCPOption82Fwd | read-write | current | This object is enabled, it appends the DHCP RAI Option on packet forwarding on this vlan. Only considered if device supports corresponding functionality, other… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49 | NodesnMspsDot1vObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1 | TablesnMspsDot1vProtocolGroupTable | not-accessible | current | A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1 | RowsnMspsDot1vProtocolGroupEntry | not-accessible | current | A mapping from a Protocol Template to a Protocol Group Identifier. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.1 | ColumnsnMspsDot1vProtocolTemplateFrameType | not-accessible | current | The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.2 | ColumnsnMspsDot1vProtocolTemplateProtocolValue | not-accessible | current | The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the followi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.3 | ColumnsnMspsDot1vProtocolGroupId | not-accessible | current | Represents a group of protocols that are associated together when assigning a VID to a frame. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.4 | ColumnsnMspsDot1vProtocolGroupRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51 | NodesnMspsVlanTunnelObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.1 | ScalarsnMspsVlanTunnelBpduPri | read-write | current | Specifies the default User Priority for all the tunneled Layer 2 BPDU's received on tunnel ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.2 | ScalarsnMspsVlanTunnelStpAddress | read-write | current | The MAC address to be used for Customer STP BPDUs tunneling. When STP tunneling is enabled on a port, this MAC address will be used as the the destination MAC … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.3 | ScalarsnMspsVlanTunnelLacpAddress | read-write | current | The MAC address to be used for LACP packets tunneling . When LACP tunneling is enabled on a port, this MAC address will be used as the the destination MAC addr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.4 | ScalarsnMspsVlanTunnelDot1xAddress | read-write | current | The MAC address to be used for Dot1x packets tunneling. When Dot1x tunneling is enabled on a port, this MAC address will be used as the the destination MAC add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.5 | ScalarsnMspsVlanTunnelGvrpAddress | read-write | current | The MAC address to be used for GVRP PDUs tunneling. When GVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.6 | ScalarsnMspsVlanTunnelGmrpAddress | read-write | current | The MAC address to be used for GMRP PDUs tunneling. When GMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7 | TablesnMspsVlanTunnelTable | not-accessible | current | This table contains information about the tunnel ports. A walk on this table will show only those interfaces that are configured for tunneling. This table is s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7.1 | RowsnMspsVlanTunnelEntry | not-accessible | current | Entry indicating the tunnel information of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7.1.1 | ColumnsnMspsVlanPort | not-accessible | current | The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7.1.2 | ColumnsnMspsVlanTunnelStatus | read-write | current | Indicates whether Tunnelling is enabled or disabled on this port. snMspsVlanTunnelStatus can be set to `enabled` if and only if the Bridge mode is set to be `P… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8 | TablesnMspsVlanTunnelProtocolTable | not-accessible | current | This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/ IGMP/MVRP and MMRP) inside a … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1 | RowsnMspsVlanTunnelProtocolEntry | not-accessible | current | Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port. Tunnel Status cannot be se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.1 | ColumnsnMspsVlanTunnelProtocolDot1x | read-write | current | The object to specify whether to peer/tunnel/discard the Dot1x packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.2 | ColumnsnMspsVlanTunnelProtocolLacp | read-write | current | The object to specify whether to peer/tunnel/discard the LACP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.3 | ColumnsnMspsVlanTunnelProtocolStp | read-write | current | The object to specify whether to peer/tunnel/discard the STP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.4 | ColumnsnMspsVlanTunnelProtocolGvrp | read-write | current | The object to specify whether to peer/tunnel/discard the GVRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.5 | ColumnsnMspsVlanTunnelProtocolGmrp | read-write | current | The object to specify whether to peer/tunnel/discard the GMRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.6 | ColumnsnMspsVlanTunnelProtocolIgmp | read-write | current | The object to specify whether to peer/tunnel/discard the IGMP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.7 | ColumnsnMspsVlanTunnelProtocolMvrp | read-write | current | The object to specify whether to peer/tunnel/discard the MVRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.8 | ColumnsnMspsVlanTunnelProtocolMmrp | read-write | current | The object to specify whether to peer/tunnel/discard the MMRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9 | TablesnMspsVlanTunnelProtocolStatsTable | not-accessible | current | This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) received and transmitted over a p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1 | RowsnMspsVlanTunnelProtocolStatsEntry | not-accessible | current | Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.1 | ColumnsnMspsVlanTunnelProtocolDot1xPktsRecvd | read-only | current | The number of tunneled Dot1x Packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.2 | ColumnsnMspsVlanTunnelProtocolDot1xPktsSent | read-only | current | The number of tunneled Dot1x Packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.3 | ColumnsnMspsVlanTunnelProtocolLacpPktsRecvd | read-only | current | The number of tunneled LACP Packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.4 | ColumnsnMspsVlanTunnelProtocolLacpPktsSent | read-only | current | The number of tunneled LACP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.5 | ColumnsnMspsVlanTunnelProtocolStpPDUsRecvd | read-only | current | The number of tunneled STP PDUs received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.6 | ColumnsnMspsVlanTunnelProtocolStpPDUsSent | read-only | current | The number of tunneled STP PDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.7 | ColumnsnMspsVlanTunnelProtocolGvrpPDUsRecvd | read-only | current | The number of tunneled GVRP PDUs received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.8 | ColumnsnMspsVlanTunnelProtocolGvrpPDUsSent | read-only | current | The number of tunneled GVRP PDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.9 | ColumnsnMspsVlanTunnelProtocolGmrpPktsRecvd | read-only | current | The number of tunneled GMRP PDUs packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.10 | ColumnsnMspsVlanTunnelProtocolGmrpPktsSent | read-only | current | The number of tunneled GMRP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.11 | ColumnsnMspsVlanTunnelProtocolIgmpPktsRecvd | read-only | current | The number of tunneled IGMP packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.12 | ColumnsnMspsVlanTunnelProtocolIgmpPktsSent | read-only | current | The number of tunneled IGMP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.13 | ColumnsnMspsVlanTunnelProtocolMvrpPktsRecvd | read-only | current | The number of MVRPDUs received on a port for which the MVRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.14 | ColumnsnMspsVlanTunnelProtocolMvrpPktsSent | read-only | current | The number of MVRPDUs transmitted on a port on which the MVRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.15 | ColumnsnMspsVlanTunnelProtocolMmrpPktsRecvd | read-only | current | The number of MMRPDUs received on a port for which the MMRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.16 | ColumnsnMspsVlanTunnelProtocolMmrpPktsSent | read-only | current | The number of MMRPDUs transmitted on a port on which the MMRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.10 | ScalarsnMspsVlanTunnelMvrpAddress | read-write | current | The MAC address to be used for MVRP PDUs tunneling. When MVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.11 | ScalarsnMspsVlanTunnelMmrpAddress | read-write | current | The MAC address to be used for MMRP PDUs tunneling. When MMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.12 | ScalarsnMspsVlanTunnelIgmpAddress | read-write | current | The MAC address to be used for IGMP packets tunneling . When IGMP tunneling is enabled on a port, this MAC address will be used as the the destination MAC addr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52 | NodesnMspsVlanDiscardObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1 | TablesnMspsVlanDiscardStatsTable | not-accessible | current | This table contains statistics information about the L2 protocol packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on reception and transmission … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1 | RowsnMspsVlanDiscardStatsEntry | not-accessible | current | Entry indicating the Discard statistics for L2 protocol packets. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.1 | ColumnsnMspsVlanDiscardDot1xPktsRx | read-only | current | The number of Dot1x packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.2 | ColumnsnMspsVlanDiscardDot1xPktsTx | read-only | current | The number of Dot1x packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.3 | ColumnsnMspsVlanDiscardLacpPktsRx | read-only | current | The number of LACP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.4 | ColumnsnMspsVlanDiscardLacpPktsTx | read-only | current | The number of LACP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.5 | ColumnsnMspsVlanDiscardStpPDUsRx | read-only | current | The number of STP BPDUs discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.6 | ColumnsnMspsVlanDiscardStpPDUsTx | read-only | current | The number of STP BPDUs discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.7 | ColumnsnMspsVlanDiscardGvrpPktsRx | read-only | current | The number of GVRP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.8 | ColumnsnMspsVlanDiscardGvrpPktsTx | read-only | current | The number of GVRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.9 | ColumnsnMspsVlanDiscardGmrpPktsRx | read-only | current | The number of GMRP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.10 | ColumnsnMspsVlanDiscardGmrpPktsTx | read-only | current | The number of GMRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.11 | ColumnsnMspsVlanDiscardIgmpPktsRx | read-only | current | The number of IGMP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.12 | ColumnsnMspsVlanDiscardIgmpPktsTx | read-only | current | The number of IGMP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.13 | ColumnsnMspsVlanDiscardMvrpPktsRx | read-only | current | The number of MVRP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.14 | ColumnsnMspsVlanDiscardMvrpPktsTx | read-only | current | The number of MVRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.15 | ColumnsnMspsVlanDiscardMmrpPktsRx | read-only | current | The number of MMRP packets discarded on the receiption side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.16 | ColumnsnMspsVlanDiscardMmrpPktsTx | read-only | current | The number of MMRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.56 | ScalarsnMspsVlanBridgeMode | read-write | current | This object indicates the Bridge mode of the switch. Setting this to 'customerBridge' means that the switch will operate as a 802.1Q VLAN Bridge. Setting this … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57 | TablesnMspsDot1qVlanPortSubnetMapTable | not-accessible | current | Subnet based VLAN classification - The source IP-subnet address in the incoming packets is used to classify VLAN membership. Subnet based VLAN is applied only … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1 | RowsnMspsDot1qVlanPortSubnetMapEntry | not-accessible | current | Entry that contains Vlan-Subnet address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.1 | ColumnsnMspsDot1qVlanPortSubnetMapAddr | not-accessible | current | The Source IP-Subnet address for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.2 | ColumnsnMspsDot1qVlanPortSubnetMapVid | read-write | current | The Vlan to which the Source IP-Subnet address of this entry is mapped to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.3 | ColumnsnMspsDot1qVlanPortSubnetMapARPOption | read-write | current | Configurable option for discarding/allowing ARP Untagged frames on the vlan. The value allow (1) indicates that ARP frames with source IP-subnet address matchi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.4 | ColumnsnMspsDot1qVlanPortSubnetMapRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.5 | ColumnsnMspsDot1qVlanPortSubnetMapSubnetMask | read-write | current | The Source IP-Subnet Mask for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.58 | ScalarsnMspsDot1qVlanSubnetBasedOnAllPorts | read-write | current | This object is used to enable/disable the subnet based VLAN Classification on all ports of snMspsDot1qVlanPortSubnetBasedClassification. On setting this object… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59 | TablesnMspsDot1qVlanPortIpv6PrefixMapTable | not-accessible | current | Ipv6 prefix based VLAN classification - The source Ipv6-prefix address in the incoming packets is used to classify VLAN membership. prefix based VLAN is applie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1 | RowsnMspsDot1qVlanPortIpv6PrefixMapEntry | not-accessible | current | Entry that contains Vlan-Ipv6 prefix address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.1 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapAddr | not-accessible | current | The Source Ipv6-prefix address for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.2 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapAddrLength | read-write | current | The Source Ipv6-prefix length for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.3 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapVid | read-write | current | The Vlan to which the Source Ipv6-prefix address of this entry is mapped to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.4 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.65 | ScalarsnMspsDot1qVlanAltMgmtAccessVlanList | read-write | current | Specifies the Vlan's in which the Mgmt Ip address can be accessed. By default the access is not allowed to reside in any vlan. This entry will only be applicab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4 | NodesnMspsSnmp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1 | IdentitysnMspsSnmpObjects | current | This MIB module defines MIB objects which provide mechanisms to remotely configure the attributes used by an MSPS hosted SNMP entity to control data exchange w… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1 | IdentitysnMspsSnmpAgentAttributes | current | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.1 | ScalarsnMspsSnmpAgentControl | read-write | current | This object is used to enable or disable the SNMP agent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.2 | ScalarsnMspsSnmpAllowedPduVersions | read-write | current | This object is used to control whether the agent will reply to PDUs of a specific SNMP framework version. If the PDU version of an incoming request does not ma… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.3 | ScalarsnMspsSnmpMinimumSecurityRequired | read-write | current | This object is used to control whether the agent will reply to PDUs of a specific SNMP security level. If the PDU version of an incoming request does not match… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.4 | ScalarsnMspsSnmpColdStartTrapControl | read-write | current | This object is used to control whether the agent will send a cold start trap. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.5 | ScalarsnMspsSnmpV1V2cPduReadOnly | read-write | current | This object is used to control whether the agent will restrict SNMPv1 and SNMPv2c PDUs to read-only access. Enabling this object overrides any other administra… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.6 | ScalarsnMspsSnmpV1TrapControl | read-write | current | This object is used to control whether the agent will generate SNMPv1 Trap PDUs. The administrative state of this object is checked additionally to any setting… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.10 | ScalarsnMspsSNMPV3UserMigration | read-write | current | This object is used to control whether the Engine ID to be migrated or not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.15 | ScalarsnMspsSnmpListenAgentPort | read-write | current | SNMP agent service's listening port. Allowed values are default port and ports in the user(1024-49151), dynamic(49500-65535) port ranges. Get operation return … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.2 | IdentitysnMspsSnmpv3SetupAttributes | current | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.2.1 | ScalarsnMspsSnmpv3ChangeSetupPassword | read-create | current | Change password of the SNMPv3 setup user. Only Setup user can set the password. Device specific policies may be imposed on the password. The secret must not be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.2.2 | ScalarsnMspsSnmpv3PublicKey | read-only | current | Public key used for secure communication |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.5 | IdentitysnMspsSnmpStdExt | current | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.5.10 | TablesnMspsSnmpTargetAddrExtTable | not-accessible | current | This table is an extension to standard MIB associated with the snmpTargetAddrTable. The snMspsSnmpTargetAddrExtTable augments the snmpTargetAddrTable with a en… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.5.10.1 | RowsnMspsSnmpTargetAddrExtEntry | not-accessible | current | Information about the target EngineID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.5.10.1.1 | ColumnsnMspsSnmpTargetEngineId | read-write | current | An SNMP engine's administratively-unique identifier. In a simple agent, this value is always that agent's own snmpEngineID value. This object take the value of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6 | NodesnMspsMstp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.1 | ScalarsnMspsMstSystemControl | read-write | current | The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all po… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.4 | ScalarsnMspsMstModuleStatus | read-write | current | The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. Th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.5 | ScalarsnMspsMstMaxMstInstanceNumber | read-write | current | The Maximun number of spanning trees to be allowed. An user may limit the number of Spanning Tree instances to be allowed in the Bridge. The value reflects the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.6 | ScalarsnMspsMstNoOfMstiSupported | read-only | current | Indicates Maximum number of spanning tree Instances supported. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.7 | ScalarsnMspsMstMaxHopCount | read-write | current | Indicates the Maximum Hop Count value. One-hundredth of the configured value will be set as Max Hop Count. An agent may return a badValue error if a set is att… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.8 | ScalarsnMspsMstBrgAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.9 | ScalarsnMspsMstCistRoot | read-only | current | The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the C… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.10 | ScalarsnMspsMstCistRegionalRoot | read-only | current | The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.11 | ScalarsnMspsMstCistRootCost | read-only | current | The Cost of the path to the CIST Root as seen from this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.12 | ScalarsnMspsMstCistRegionalRootCost | read-only | current | The Cost of the path to the CIST Regional Root as seen from this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.13 | ScalarsnMspsMstCistRootPort | read-only | current | The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.14 | ScalarsnMspsMstCistBridgePriority | read-write | current | The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.15 | ScalarsnMspsMstCistBridgeMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may retur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.16 | ScalarsnMspsMstCistBridgeForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.17 | ScalarsnMspsMstCistHoldTime | read-only | current | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.18 | ScalarsnMspsMstCistMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.19 | ScalarsnMspsMstCistForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.20 | ScalarsnMspsMstMstpUpCount | read-only | current | The number of times MSTP Module has been enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.21 | ScalarsnMspsMstMstpDownCount | read-only | current | The number of times MSTP Module has been disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.25 | ScalarsnMspsMstForceProtocolVersion | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.26 | ScalarsnMspsMstTxHoldCount | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.27 | ScalarsnMspsMstMstiConfigIdSel | read-write | current | The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.28 | ScalarsnMspsMstMstiRegionName | read-write | current | The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.29 | ScalarsnMspsMstMstiRegionVersion | read-write | current | Version of the MST Region. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.30 | ScalarsnMspsMstMstiConfigDigest | read-only | current | The Configuration Digest value for this Region. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.31 | ScalarsnMspsMstBufferOverFlowCount | read-only | current | The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.32 | ScalarsnMspsMstMemAllocFailureCount | read-only | current | The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.33 | ScalarsnMspsMstRegionConfigChangeCount | read-only | current | The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.34 | ScalarsnMspsMstCistBridgeRoleSelectionSemState | read-only | current | Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.35 | ScalarsnMspsMstCistTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.36 | ScalarsnMspsMstCistTopChanges | read-only | current | The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.37 | ScalarsnMspsMstCistNewRootBridgeCount | read-only | current | The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.38 | ScalarsnMspsMstCistHelloTime | read-only | current | This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.39 | ScalarsnMspsMstCistBridgeHelloTime | read-write | current | The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.40 | ScalarsnMspsMstRstpPlusStatus | read-write | current | The administrative module status requested by management for the RSTP+ Module. This enables or disables RSTP+ feature in the system. A value of 'enabled' (1) i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.41 | ScalarsnMspsMstRstpPlusMrpInterconDomainId | read-write | current | This object represents RstpPlus MRP Interconnection domain Id for the RSTP and MRP ring coupling, which is equivalent to MRP Interconnection domain Id 'snMspsM… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.45 | ScalarsnMspsMstCistDynamicPathcostCalculation | read-write | current | This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.46 | ScalarsnMspsMstCalcPortPathCostOnSpeedChg | read-write | current | This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47 | TablesnMspsMstVlanInstanceMappingTable | not-accessible | current | This table contains one entry for each instance of MSTP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1 | RowsnMspsMstVlanInstanceMappingEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.1 | ColumnsnMspsMstInstanceIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance. In a Bridge that supports PBB-TE, the sp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.2 | ColumnsnMspsMstMapVlanIndex | read-write | current | The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.3 | ColumnsnMspsMstUnMapVlanIndex | read-write | current | The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.4 | ColumnsnMspsMstSetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.5 | ColumnsnMspsMstResetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.6 | ColumnsnMspsMstInstanceVlanMapped | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.7 | ColumnsnMspsMstInstanceVlanMapped2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1025 through 2048. The first octet corresponds to VLANs with VlanIndex values 10… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.8 | ColumnsnMspsMstInstanceVlanMapped3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2049 through 3072. The first octet corresponds to VLANs with VlanIndex values of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.9 | ColumnsnMspsMstInstanceVlanMapped4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3073 through 4095. The first octet corresponds to VLANs with VlanIndex values 30… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.48 | ScalarsnMspsMstSetTraps | read-write | current | This object is used to enable and disable specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol u… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.49 | ScalarsnMspsMstGenTrapType | read-only | current | The general events like none - none of the below values up - protocol UP, down - protocol DOWN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.50 | ScalarsnMspsMstTCProtectionBackoff | read-write | current | MSTP Topology Change Protection Backoff time in seconds. 0 - this feature is disable or not supported. 1..60 - delay in seconds, only for the Topology Change t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60 | TablesnMspsMstMstiBridgeTable | not-accessible | current | Table containing Bridge Information specific to Spanning Tree Instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1 | RowsnMspsMstMstiBridgeEntry | not-accessible | current | Entry indicating the Bridge Information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.1 | ColumnsnMspsMstMstiInstanceIndex | not-accessible | current | Spanning Tree Instance to which the information belongs. The special MSTID of 4094, known as the PTETID, identifies VIDs that are used by Ethernet Switched Pat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.2 | ColumnsnMspsMstMstiBridgeRegionalRoot | read-only | current | MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs origin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.3 | ColumnsnMspsMstMstiBridgePriority | read-write | current | The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.4 | ColumnsnMspsMstMstiRootCost | read-only | current | The Cost of the path to the MSTI Regional Root as seen by this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.5 | ColumnsnMspsMstMstiRootPort | read-only | current | The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.6 | ColumnsnMspsMstMstiTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.7 | ColumnsnMspsMstMstiTopChanges | read-only | current | The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.8 | ColumnsnMspsMstMstiNewRootBridgeCount | read-only | current | The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.9 | ColumnsnMspsMstMstiBridgeRoleSelectionSemState | read-only | current | Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.10 | ColumnsnMspsMstInstanceUpCount | read-only | current | The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.11 | ColumnsnMspsMstInstanceDownCount | read-only | current | The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.12 | ColumnsnMspsMstOldDesignatedRoot | read-only | current | The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63 | TablesnMspsMstCistPortTable | not-accessible | current | This table contains Common Spanning Tree Port Information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1 | RowsnMspsMstCistPortEntry | not-accessible | current | A list of information maintained by every port for Common Spanning tree. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.1 | ColumnsnMspsMstCistPort | not-accessible | current | The Port number of the port for which this entry contains spanning tree information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.2 | ColumnsnMspsMstCistPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the CIST Root which include this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.3 | ColumnsnMspsMstCistPortPriority | read-write | current | The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.4 | ColumnsnMspsMstCistPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.5 | ColumnsnMspsMstCistPortDesignatedBridge | read-only | current | The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.6 | ColumnsnMspsMstCistPortDesignatedPort | read-only | current | The Port identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.7 | ColumnsnMspsMstCistPortAdminP2P | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.8 | ColumnsnMspsMstCistPortOperP2P | read-only | current | The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.9 | ColumnsnMspsMstCistPortAdminEdgeStatus | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.10 | ColumnsnMspsMstCistPortOperEdgeStatus | read-only | current | The operational value of the Edge Port parameter. The object is initialized to the value of snMspsMstCistPortAdminEdgeStatus and is set FALSE on reception of a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.11 | ColumnsnMspsMstCistPortProtocolMigration | read-write | current | This object represents the protocol migration state event machine variable 'mcheck' for this port. When operating in RSTP/MSTP (version >= 2) mode, writing TRU… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.12 | ColumnsnMspsMstCistPortState | read-only | current | Current state of the Port as defined by the Common spanning tree protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.13 | ColumnsnMspsMstCistForcePortState | read-write | current | Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's stat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.14 | ColumnsnMspsMstCistPortForwardTransitions | read-only | current | Number of times this port has transitioned to the Forwarding State. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.15 | ColumnsnMspsMstCistPortRxMstBpduCount | read-only | current | Number of MST BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.16 | ColumnsnMspsMstCistPortRxRstBpduCount | read-only | current | Number of RST BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.17 | ColumnsnMspsMstCistPortRxConfigBpduCount | read-only | current | Number of Configuration BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.18 | ColumnsnMspsMstCistPortRxTcnBpduCount | read-only | current | Number of TCN BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.19 | ColumnsnMspsMstCistPortTxMstBpduCount | read-only | current | Number of MST BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.20 | ColumnsnMspsMstCistPortTxRstBpduCount | read-only | current | Number of RST BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.21 | ColumnsnMspsMstCistPortTxConfigBpduCount | read-only | current | Number of Configuration BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.22 | ColumnsnMspsMstCistPortTxTcnBpduCount | read-only | current | Number of TCN BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.23 | ColumnsnMspsMstCistPortInvalidMstBpduRxCount | read-only | current | Number of Invalid MST BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.24 | ColumnsnMspsMstCistPortInvalidRstBpduRxCount | read-only | current | Number of Invalid RST BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.25 | ColumnsnMspsMstCistPortInvalidConfigBpduRxCount | read-only | current | Number of Invalid Configuration BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.26 | ColumnsnMspsMstCistPortInvalidTcnBpduRxCount | read-only | current | Number of Invalid TCN BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.27 | ColumnsnMspsMstCistPortTransmitSemState | read-only | current | Indicates current State of the Port Transmit state machine. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.28 | ColumnsnMspsMstCistPortReceiveSemState | read-only | current | Indicates current State of the Port Receive state machine. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.29 | ColumnsnMspsMstCistPortProtMigrationSemState | read-only | current | Indicates current State of the Port Protocol Migration State machine. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.30 | ColumnsnMspsMstCistProtocolMigrationCount | read-only | current | The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/MSTP. A Trap is generat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.31 | ColumnsnMspsMstCistPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.32 | ColumnsnMspsMstCistPortRegionalRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.33 | ColumnsnMspsMstCistPortRegionalPathCost | read-only | current | The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.34 | ColumnsnMspsMstCistSelectedPortRole | read-only | current | Selected Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.35 | ColumnsnMspsMstCistCurrentPortRole | read-only | current | Current Port Role of the port for this spanning tree instance. It returns role 'rstpPlus', if the port is ring port and spanning tree is enabled on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.36 | ColumnsnMspsMstCistPortInfoSemState | read-only | current | Current state of the Port Information State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.37 | ColumnsnMspsMstCistPortRoleTransitionSemState | read-only | current | Current state of the Port Role Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.38 | ColumnsnMspsMstCistPortStateTransitionSemState | read-only | current | Current state of the Port State Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.39 | ColumnsnMspsMstCistPortTopologyChangeSemState | read-only | current | Current state of the Topology Change State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.40 | ColumnsnMspsMstCistPortHelloTime | read-write | current | The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.41 | ColumnsnMspsMstCistPortOperVersion | read-only | current | This indicates whether the Port is operationally in the Mstp mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting MST BPDUs, RST B… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.42 | ColumnsnMspsMstCistPortEffectivePortState | read-only | current | The effective operational state of the port for CIST. This will TRUE only when the port is operationally up in the Interface level and Protocol level for CIST.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.43 | ColumnsnMspsMstCistPortAutoEdgeStatus | read-write | current | This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.44 | ColumnsnMspsMstCistPortRestrictedRole | read-write | current | A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priorit… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.45 | ColumnsnMspsMstCistPortRestrictedTCN | read-write | current | A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This pa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.46 | ColumnsnMspsMstCistPortAdminPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.47 | ColumnsnMspsMstCistPortEnableBPDURx | read-write | current | A Boolean value set by management. If FALSE, the BPDUs received on the port are ignored. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.48 | ColumnsnMspsMstCistPortEnableBPDUTx | read-write | current | A Boolean value set by management. If FALSE, no BPDUs are transmitted by this port. This variable should be FALSE before configuring port as a Layer Two Gatewa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.49 | ColumnsnMspsMstCistPortPseudoRootId | read-write | current | In MSTP Bridge, the snMspsMstCistPortPseudoRootId parameter value by default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.50 | ColumnsnMspsMstCistPortIsL2Gp | read-write | current | A Boolean value set by management. If TRUE, then port is functioning as a Layer Two Gateway Port. The snMspsMstCistPortEnableBPDUTx should be FALSE to set snMs… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.51 | ColumnsnMspsMstCistPortLoopGuard | read-write | current | A Boolean value set by management. If TRUE, then it will not age out the information even if the peer does not send information. If the port continues to recei… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.52 | ColumnsnMspsMstCistPortLimitedTCN | read-write | current | RSTP+ both the received and the detected (self-produced) TCs are accepted but not forwarded. It comes into effect only if RSTP+ feature is enabled and snMspsMs… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.53 | ColumnsnMspsMstCistPortBpduGuard | read-write | current | A Boolean value set by management. If TRUE, then it will power down the port if BPDU is received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64 | TablesnMspsMstMstiPortTable | not-accessible | current | This table contains Spanning Tree Instance Specific Port Information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1 | RowsnMspsMstMstiPortEntry | not-accessible | current | A list of information maintained by every port for each and every spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.1 | ColumnsnMspsMstMstiPort | not-accessible | current | The Port number of the port for which this entry contains spanning tree information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.2 | ColumnsnMspsMstMstiPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the MSTI Root which include this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.3 | ColumnsnMspsMstMstiPortPriority | read-write | current | The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supporte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.4 | ColumnsnMspsMstMstiPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.5 | ColumnsnMspsMstMstiPortDesignatedBridge | read-only | current | The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.6 | ColumnsnMspsMstMstiPortDesignatedPort | read-only | current | The Port identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.7 | ColumnsnMspsMstMstiPortState | read-only | current | Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) sta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.8 | ColumnsnMspsMstMstiForcePortState | read-write | current | Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.9 | ColumnsnMspsMstMstiPortForwardTransitions | read-only | current | Number of times this port has transitioned to the Forwarding State for specific instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.10 | ColumnsnMspsMstMstiPortReceivedBPDUs | read-only | current | Number of BPDUs received by this port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.11 | ColumnsnMspsMstMstiPortTransmittedBPDUs | read-only | current | Number of BPDUs transmitted on this port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.12 | ColumnsnMspsMstMstiPortInvalidBPDUsRcvd | read-only | current | Number of Invalid BPDUs received on this Port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.13 | ColumnsnMspsMstMstiPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.14 | ColumnsnMspsMstMstiSelectedPortRole | read-only | current | Selected Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.15 | ColumnsnMspsMstMstiCurrentPortRole | read-only | current | Current Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.16 | ColumnsnMspsMstMstiPortInfoSemState | read-only | current | Current state of the Port Information State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.17 | ColumnsnMspsMstMstiPortRoleTransitionSemState | read-only | current | Current state of the Port Role Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.18 | ColumnsnMspsMstMstiPortStateTransitionSemState | read-only | current | Current state of the Port State Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.19 | ColumnsnMspsMstMstiPortTopologyChangeSemState | read-only | current | Current state of the Topology Change State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.20 | ColumnsnMspsMstMstiPortEffectivePortState | read-only | current | The effective operational stae of the port for specific instance. This is will be TRUE only when the port is operationally up in the interface level and Protoc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.21 | ColumnsnMspsMstMstiPortAdminPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.22 | ColumnsnMspsMstMstiPortPseudoRootId | read-write | current | In MSTP Bridge, the snMspsMstMstiPortPseudoRootId parameter value by default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11 | NodesnMspsRadius | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2 | NodesnMspsRadiusServer | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.2 | ScalarsnMspsRadExtMaxNoOfUserEntries | read-write | current | Maximum of No of User entries stored. The value of this object will be stored for the MemPool Initialization. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.3 | ScalarsnMspsRadExtPrimaryServerAddressType | read-write | current | The address type of active server.This can be Ipv4 or Ipv6. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.4 | ScalarsnMspsRadExtPrimaryServer | read-write | current | A maximum of 5 RADIUS servers (IPv4 or IPv6) can be configured in snMspsRadExtServerEntry. This object indicates the primary server among those 5 servers. The … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5 | TablesnMspsRadExtServerTable | not-accessible | current | The (conceptual) table that lists the RADIUS servers with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1 | RowsnMspsRadExtServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS server with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.1 | ColumnsnMspsRadExtServerIndex | not-accessible | current | This object enumerates the order in which the server should be contacted.Index 1 is contacted first if the primary server specified by snMspsRadExtPrimaryServe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.2 | ColumnsnMspsRadExtServerAddrType | read-create | current | The type of IP address to be configured for the RADIUS server. While other types of addresses are defined in the InetAddressType textual convention, like DNS n… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.3 | ColumnsnMspsRadExtServerAddress | read-write | current | The IP address(Ipv4 or Ipv6) of the RADIUS server referred to in snMspsRadExtServerTable entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.4 | ColumnsnMspsRadExtServerType | read-write | current | The RADIUS server type (Authentication or Accounting or Both). For creating a server entry, the Server Type should be set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.5 | ColumnsnMspsRadExtServerSharedSecret | read-write | current | The secret string which is shared between the Server and the Client |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.6 | ColumnsnMspsRadExtServerEnabled | read-write | current | This object informs whether the server is active or inactive |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.7 | ColumnsnMspsRadExtServerResponseTime | read-write | current | The maximum time within which the server has to respond for a request from the client. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.8 | ColumnsnMspsRadExtServerMaximumRetransmission | read-write | current | The allowed maximum number of trials to be tried by a client to get the response from the server for a request |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.9 | ColumnsnMspsRadExtServerEntryStatus | read-write | current | The status of the entry can be used as specified in the SNMP V2 standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6 | TablesnMspsRadExtAuthServerTable | not-accessible | current | The (conceptual) table taht lists the RADIUS authentication servers with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1 | RowsnMspsRadExtAuthServerEntry | not-accessible | current | An entry (conceptual row) that represents a RADIUS authentication server with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.1 | ColumnsnMspsRadExtAuthServerIndex | not-accessible | current | A number that uniquely idenfifies each RADIUS Authentication server with which the client communicates. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.2 | ColumnsnMspsRadExtAuthServerAddressType | read-only | current | The address type (IPv4 or IPv6) of the RADIUS authentication server referred to in the snMspsRadExtAuthServerTable entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.3 | ColumnsnMspsRadExtAuthServerAddress | read-only | current | The IP address (Ipv4 or Ipv6) of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.4 | ColumnsnMspsRadExtAuthClientServerPortNumber | read-write | current | The UDP port that the client uses to send requests to this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.5 | ColumnsnMspsRadExtAuthClientRoundTripTime | read-only | current | The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that that matches with the Access-Re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.6 | ColumnsnMspsRadExtAuthClientAccessRequests | read-only | current | The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.7 | ColumnsnMspsRadExtAuthClientAccessRetransmissions | read-only | current | The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.8 | ColumnsnMspsRadExtAuthClientAccessAccepts | read-only | current | The number of RADIUS Access-Accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.9 | ColumnsnMspsRadExtAuthClientAccessRejects | read-only | current | The number of RADIUS Access-Reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.10 | ColumnsnMspsRadExtAuthClientAccessChallenges | read-only | current | The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.11 | ColumnsnMspsRadExtAuthClientMalformedAccessResponses | read-only | current | The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.12 | ColumnsnMspsRadExtAuthClientBadAuthenticators | read-only | current | The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.13 | ColumnsnMspsRadExtAuthClientPendingRequests | read-only | current | The number of RADIUS Access-Request packets destined for this server, which have not yet timed out or received a response. This variable is incremented when an… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.14 | ColumnsnMspsRadExtAuthClientTimeouts | read-only | current | The number of authentication timeouts to this server. After the entry timeout the client may retry to the same server, send to a different server, or give up. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.15 | ColumnsnMspsRadExtAuthClientUnknownTypes | read-only | current | The number of RADIUS packets of unknown type, which were received from this server on the authentication port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.16 | ColumnsnMspsRadExtAuthClientPacketsDropped | read-only | current | The number of RADIUS packets, which were received from this server on the authentication port and dropped for some other reason. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.17 | ColumnsnMspsRadExtAuthServerType | read-write | current | The RADIUS Authentication server type (login or pnac or Both). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.20 | ColumnsnMspsRadExtAuthServerTls | read-write | current | This object is for enabling or disabling the Transport Layer Security(TLS) option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.22 | ColumnsnMspsRadExtAuthServerForceMessageAuthAttr | read-write | current | This object is for forcing Client to accept only the packets from server which have Message-Authenticator Attribute. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.25 | ColumnsnMspsRadExtAuthServerRadSec | read-write | current | Enable or disable the use of the RadSec protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.28 | ColumnsnMspsRadExtAuthServerCaCertFilename | read-write | current | CA certificate filename for the RadSec protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.31 | ColumnsnMspsRadExtAuthServerClientCertFilename | read-write | current | Client certificate filename for the RadSec protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.10 | ScalarsnMspsRadAuthorizationMode | read-write | current | The object used to parse the RADIUS accept/reject packet by standard mode or vendor-specific mode to get the User Management Access Control (UMAC) value (user … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.11 | ScalarsnMspsRadDisconnectPacketAllowStatus | read-write | current | This object used to enable or disable RADIUS disconnect packets process. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12 | NodesnMspsRmon | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.3 | ScalarsnMspsRmonEnableStatus | read-write | current | This object defines the rmonenable flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.4 | ScalarsnMspsRmonHwStatsSupp | read-write | current | This object defines the flag for whether HW supports Etherstatistics or not |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.5 | ScalarsnMspsRmonHwHistorySupp | read-write | current | This object defines the enabled HWhistorysupp flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.6 | ScalarsnMspsRmonHwAlarmSupp | read-write | current | This object defines the enabled HWAlarmsupp flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.10 | ScalarsnMspsRmonHwEventSupp | read-write | current | This object defines the enabled HWEvent flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.11 | ScalarsnMspsRmon2AdminStatus | read-write | current | This object defines the admin status for rmon2. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.12 | ScalarsnMspsDsmonAdminStatus | read-write | current | This object defines the admin status for dsmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.20 | ScalarsnMspsRmonHistoryPreset | read-write | current | When enabled, rmon history entries are reset with default values |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13 | NodesnMspsIp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1 | NodesnMspsIpIp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.1 | ScalarsnMspsIpInLengthErrors | read-only | current | Total number of packets received by IP with length less than IP header length. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.2 | ScalarsnMspsIpInCksumErrors | read-only | current | Total Number of received packets those failed to pass checksum verification. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.3 | ScalarsnMspsIpInVersionErrors | read-only | current | Total number of received packets with different IP version from this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.4 | ScalarsnMspsIpInTTLErrors | read-only | current | Number of IP packets received at this entity with 'Time to Live' field equal to ZERO |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.5 | ScalarsnMspsIpInOptionErrors | read-only | current | Number of IP packets received with improper options. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.6 | ScalarsnMspsIpInBroadCasts | read-only | current | Total number of IP broadcast packets received at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.7 | ScalarsnMspsIpOutGenErrors | read-only | current | Number of outgoing IP packets rejected due to general problems like interface down, forwarding disabled etc. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.9 | ScalarsnMspsIpOptProcEnable | read-write | current | Indication as to if Option processing is active. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.10 | ScalarsnMspsIpNumMultipath | read-write | current | The number of multi-paths in the routing table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.11 | ScalarsnMspsIpLoadShareEnable | read-write | current | Enabling this will distribute the load among available equal cost multi-paths. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.12 | ScalarsnMspsIpEnablePMTUD | read-write | current | This Object Enables or Disables PMTU-D on all paths globally. This MIB Object overrides the route-based and application-level requests for PMTU-D. When this ob… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.13 | ScalarsnMspsIpPmtuEntryAge | read-write | current | This object specifies the timeout in minutes, after which the estimate of a PMTU is considered stale. After the configured minutes the estimate of the PMTU is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18 | TablesnMspsIpAddressTable | not-accessible | current | The table of IP addresses on every Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1 | RowsnMspsIpAddressEntry | not-accessible | current | The individual entry in the above table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.1 | ColumnsnMspsIpAddrTabIfaceId | read-only | current | The interface number to which the IP address belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.2 | ColumnsnMspsIpAddrTabAddress | not-accessible | current | One of the router's IP addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.3 | ColumnsnMspsIpAddrTabAdvertise | read-write | current | A flag indicating whether or not the address is to be advertised. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.4 | ColumnsnMspsIpAddrTabPreflevel | read-write | current | The preferability of the address as a default router address, relative to other router addresses on the same subnet. A 32-bit, signed, twos-complement integer,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.5 | ColumnsnMspsIpAddrTabStatus | read-only | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19 | TablesnMspsIpRtrLstTable | not-accessible | current | List of default router addresses. Used when system functions as a host.Maintained as per RFC 1122. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1 | RowsnMspsIpRtrLstEntry | not-accessible | current | The individual entry in the above table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.1 | ColumnsnMspsIpRtrLstIface | read-write | current | The interface via which the router could be reached. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.2 | ColumnsnMspsIpRtrLstAddress | not-accessible | current | An IP address of a default router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.3 | ColumnsnMspsIpRtrLstPreflevel | read-write | current | The preferability of the RouterAddress as a default router address, relative to other router addresses on the same subnet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.4 | ColumnsnMspsIpRtrLstStatic | read-only | current | This entry states how the default router address was learned. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.5 | ColumnsnMspsIpRtrLstStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23 | TablesnMspsIpifTable | not-accessible | current | IP interface table which maintains the interface specific configurable parameters of IP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1 | RowsnMspsIpifEntry | not-accessible | current | A particular interface specific IP information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.1 | ColumnsnMspsIpifIndex | not-accessible | current | The index value which identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same inte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.2 | ColumnsnMspsIpifMaxReasmSize | read-write | current | The maximum size of the fragmented IP datagram received on this interface that can be considered for reassembly. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.3 | ColumnsnMspsIpifIcmpRedirectEnable | read-write | current | Enabling or Diabling of the ICMP redirect messages on an interface basis. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.4 | ColumnsnMspsIpifDrtBcastFwdingEnable | read-write | current | Enabling of Directed broadcast forwarding on that interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.5 | ColumnsnMspsIpifProxyArpAdminStatus | read-write | current | Enables or Disables Proxy ARP Feature for that interface. By default, this object should have the value disabled(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.25 | ScalarsnMspsIpProxyArpClient | read-write | current | Enables or disables Proxy ARP Client Feature. By default, this object should have the value disabled(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.30 | ScalarsnMspsDcp | read-write | current | The value dcp-read-write (1) will automatically run DCP (Detection & Configuration Protocoll). The value dcp-read-only (2) allows DCP only to read parameters. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.31 | ScalarsnMspsAgentReceiveOnAllKnownVLANs | read-write | current | Setting AgentReceiveOnAllKnownVLANs to Enable(1) enables the reception of IP traffic for the agent on all VLANs. This means the agent accepts incoming connecti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32 | TablesnMspsInetStaticRouteTable | not-accessible | current | This entity's IP Static Routing table. This table displays both active and inactive static routes |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1 | RowsnMspsInetStaticRouteEntry | not-accessible | current | A particular route to a particular destination, under a particular policy (as reflected in the snMspsInetStaticRoutePolicy object). Implementers need to be awa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.1 | ColumnsnMspsInetStaticRouteDestType | not-accessible | current | The type of the snMspsInetStaticRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.2 | ColumnsnMspsInetStaticRouteDest | not-accessible | current | The destination IP address of this route. The type of this address is determined by the value of the snMspsInetStaticRouteDestType object. IPv4 and IPv6 Static… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.3 | ColumnsnMspsInetStaticRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the snMspsIn… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.4 | ColumnsnMspsInetStaticRoutePolicy | not-accessible | current | This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.5 | ColumnsnMspsInetStaticRouteNextHopType | not-accessible | current | The type of the snMspsInetStaticRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those ad… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.6 | ColumnsnMspsInetStaticRouteNextHop | not-accessible | current | On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.7 | ColumnsnMspsInetStaticRouteIfIndex | read-create | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. For active static routes this object will hav… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.8 | ColumnsnMspsInetStaticRouteType | read-create | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.9 | ColumnsnMspsInetStaticRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.10 | ColumnsnMspsInetStaticRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except throu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.11 | ColumnsnMspsInetStaticRouteNextHopAS | read-create | current | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's snMspsInetStaticRou… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.12 | ColumnsnMspsInetStaticRouteMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsInetStaticRouteP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.13 | ColumnsnMspsInetStaticRouteStatus | read-create | current | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.33 | ScalarsnMspsRcdpMode | read-write | current | The value rcdp-read-write(2) allows RCDP to read and write parameters. The value rcdp-read-only(1) allows RCDP only read parameters. The value rcdp-off(0) will… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40 | TablesnMspsTraceRouteConfigTable | not-accessible | current | TraceRoute Configuration Table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1 | RowsnMspsTraceRouteConfigEntry | not-accessible | current | This table Contains the configuration information about a particular traceroute operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.1 | ColumnsnMspsTraceRouteConfigDestType | not-accessible | current | Address Type of trace route destination specified in snMspsTraceRouteConfigDest |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.2 | ColumnsnMspsTraceRouteConfigDest | not-accessible | current | The destination address to which the route has to be traced. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.3 | ColumnsnMspsTraceRouteConfigOperStatus | read-only | current | Current Status for the traceroute operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.4 | ColumnsnMspsTraceRouteConfigError | read-only | current | Error Status after completion of traceroute operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.5 | ColumnsnMspsTraceRouteConfigRowStatus | read-create | current | Creates and Initiates the traceroute operation for the destination snMspsTraceRouteConfigDest. Log for the traceroute operation can be viewed in snMspsTraceRou… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43 | TablesnMspsTraceRouteTable | not-accessible | current | Table containing Trace route result for the destination specified in snMspsTraceRouteConfigTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1 | RowsnMspsTraceRouteEntry | not-accessible | current | This table contains the information about the intermediate nodes on the way to the destination specified in snMspsTraceRouteConfigTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.1 | ColumnsnMspsTraceRouteDestType | not-accessible | current | Address Type of trace route destination specified in snMspsTraceRouteDest |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.2 | ColumnsnMspsTraceRouteDest | not-accessible | current | The destination address to which the route has to be traced. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.3 | ColumnsnMspsTraceRouteHopCount | not-accessible | current | Count of the Number of Hops required to reach the intermediate node snMspsTraceRouteIntermHop. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.4 | ColumnsnMspsTraceRouteIntermHopType | read-only | current | Address type for the snMspsTraceRouteIntermHop |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.5 | ColumnsnMspsTraceRouteIntermHop | read-only | current | Address of the intermediate node or the end destination snMspsTraceRouteDest. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.6 | ColumnsnMspsTraceReachTime1 | read-only | current | The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop. The value of '-1' denotes that the response was not received from… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.7 | ColumnsnMspsTraceReachTime2 | read-only | current | The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop for the second time. The value of '-1' denotes that the response w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.8 | ColumnsnMspsTraceReachTime3 | read-only | current | The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop for the third time. The value of '-1' denotes that the response wa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.50 | ScalarsnMspsIpNextHopArpKeepAliveStatus | read-write | current | Setting of Value enabled(1), enables dynamic ARP Resolution for all the nexthop gateway addresses of the best routes present in the system and prevents ARP Tab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.51 | ScalarsnMspsIpNextHopArpKeepAliveTime | read-write | current | Time after which the dynamic ARP resolution will be triggered if snMspsIpNextHopArpKeepAliveStatus is true. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.52 | ScalarsnMspsIpSingleHopInterVlanRouting | read-write | current | Status of the SingleHopInterVlanRouting - which enables routing in between connected/local routes even if the routing is not enabled/supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62 | NodesnMspsIpIpPbr | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.1 | ScalarsnMspsIpIpPbrForwarding | read-write | current | The indication of whether this entity is acting as an IPv4 router in respect to the forwarding of datagrams received by based on policy based routing, but not … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16 | TablesnMspsIpIpPbrPolicyTable | not-accessible | current | A table to configure Ip Policy Based Routing's Policy in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1 | RowsnMspsIpIpPbrPolicyEntry | not-accessible | current | Each entry in this table is a Ip Policy Based Routing Policy entries. Index to the table is Ip Policy Based Routing Policy number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.1 | ColumnsnMspsIpIpPbrPolicyNo | not-accessible | current | Ip Policy Based Routing (BRB) Policy rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.2 | ColumnsnMspsIpIpPbrPolicyPriority | read-write | current | The priority of the Policy Based Routing rule can be used to decide which rule is applicable when Higher value of 'Ip Policy Based Routing Policy priority' imp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.3 | ColumnsnMspsIpIpPbrPolicyRefCount | read-only | current | Number of times this rule is mapped. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.6 | ColumnsnMspsIpIpPbrPolicyMask | read-write | current | The maks give the validity of policy objects for this rule. Set opertion of this object returns inconsistentValue, If the system not support given mask. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.7 | ColumnsnMspsIpIpPbrPolicyInPhyIfIndex | read-write | current | The physical interface index of the rule or zero. The validity of this object dependants on 'snMspsIpIpPbrPolicyMask'. Set opertion of this object returns inco… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.8 | ColumnsnMspsIpIpPbrPolicyInVlanIfIndex | read-write | current | The Vlan interface index of the rule or zero. The validity of this object dependants on 'snMspsIpIpPbrPolicyMask'. Set opertion of this object returns inconsis… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.9 | ColumnsnMspsIpIpPbrPolicySrcType | read-create | current | The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a cl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.10 | ColumnsnMspsIpIpPbrPolicySrc | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. snMspsIpIpPbrPolicySrcIpAddrPref… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.11 | ColumnsnMspsIpIpPbrPolicySrcPfxLen | read-create | current | The length of the CIDR Prefix carried in snMspsIpIpPbrPolicySrcIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indica… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.12 | ColumnsnMspsIpIpPbrPolicyProtocol | read-write | current | The type of protocol to be checked against the packet. The default value is 0. The validity of this object dependants on 'snMspsIpIpPbrPolicyMask'. Set opertio… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.16.1.25 | ColumnsnMspsIpIpPbrPolicyStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21 | TablesnMspsIpIpPbrRouteTable | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1 | RowsnMspsIpIpPbrRouteEntry | not-accessible | current | A particular route to a particular destination, under a particular policy (as reflected in the snMspsIpIpPbrPolicyTable object). Dynamically created rows will … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.1 | ColumnsnMspsIpIpPbrRouteDestType | not-accessible | current | The type of the snMspsIpIpPbrRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.2 | ColumnsnMspsIpIpPbrRouteDest | not-accessible | current | The destination IP address of this route. The type of this address is determined by the value of the snMspsIpIpPbrRouteDestType object. The values for the inde… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.3 | ColumnsnMspsIpIpPbrRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the snMspsIp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.4 | ColumnsnMspsIpIpPbrRoutePolicy | not-accessible | current | This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.5 | ColumnsnMspsIpIpPbrRouteNextHopType | not-accessible | current | The type of the snMspsIpIpPbrRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those addre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.6 | ColumnsnMspsIpIpPbrRouteNextHop | not-accessible | current | On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.7 | ColumnsnMspsIpIpPbrRouteIfIndex | read-create | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.8 | ColumnsnMspsIpIpPbrRouteType | read-create | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.9 | ColumnsnMspsIpIpPbrRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.10 | ColumnsnMspsIpIpPbrRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except throu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.11 | ColumnsnMspsIpIpPbrRouteNextHopAS | read-create | current | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's snMspsIpIpPbrRouteP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.12 | ColumnsnMspsIpIpPbrRouteMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsIpIpPbrRouteProt… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.13 | ColumnsnMspsIpIpPbrRouteMetric2 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsIpIpPbrRoutePro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.14 | ColumnsnMspsIpIpPbrRouteMetric3 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsIpIpPbrRoutePro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.15 | ColumnsnMspsIpIpPbrRouteMetric4 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsIpIpPbrRoutePro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.16 | ColumnsnMspsIpIpPbrRouteMetric5 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsIpIpPbrRoutePro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.17 | ColumnsnMspsIpIpPbrRouteFlags | read-only | current | The object give more info about the route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.62.21.1.25 | ColumnsnMspsIpIpPbrRouteStatus | read-create | current | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2 | NodesnMspsIpArp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.1 | ScalarsnMspsArpCacheTimeout | read-write | current | Time after which the entry in cache is deleted |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.2 | ScalarsnMspsArpCachePendTime | read-write | current | Time for which an unresolved entry will be held until response is received |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.3 | ScalarsnMspsArpMaxRetries | read-write | current | Maximum number of retry attempts before aborting resolving |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.4 | ScalarsnMspsArpTableScanType | read-write | current | value of zero(0) disable arp table scan |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3 | NodesnMspsIpIcmp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.1 | ScalarsnMspsIcmpSendRedirectEnable | read-write | current | Allow sending ICMP Redirect Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.2 | ScalarsnMspsIcmpSendUnreachableEnable | read-write | current | Allow sending ICMP Unreachable Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.3 | ScalarsnMspsIcmpSendEchoReplyEnable | read-write | current | Allow sending ICMP Echo Reply Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.4 | ScalarsnMspsIcmpNetMaskReplyEnable | read-write | current | Allow sending ICMP Net Mask Reply Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.5 | ScalarsnMspsIcmpTimeStampReplyEnable | read-write | current | Allow sending ICMP Time stamp reply Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.6 | ScalarsnMspsIcmpInDomainNameRequests | read-only | current | The number of ICMP Domain Name Requests received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.7 | ScalarsnMspsIcmpInDomainNameReply | read-only | current | The number of ICMP Domain Name Replies received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.8 | ScalarsnMspsIcmpOutDomainNameRequests | read-only | current | The number of ICMP Domain Name Requests send. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.9 | ScalarsnMspsIcmpOutDomainNameReply | read-only | current | The number of ICMP Domain Name Replies send. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.10 | ScalarsnMspsIcmpDirectQueryEnable | read-write | current | DNS Direct Query will be enabled or disabled accordingly |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.11 | ScalarsnMspsDomainName | read-write | current | Domain Name of the system, used to send when replies to DNS Direct Query. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.12 | ScalarsnMspsTimeToLive | read-write | current | The number of seconds untill which the name can be cached. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.13 | ScalarsnMspsIcmpInSecurityFailures | read-only | current | The number of ICMP Security Failure messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.14 | ScalarsnMspsIcmpOutSecurityFailures | read-only | current | The number of ICMP Security Failure messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.15 | ScalarsnMspsIcmpSendSecurityFailuresEnable | read-write | current | Allow sending Security Failure messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.16 | ScalarsnMspsIcmpRecvSecurityFailuresEnable | read-write | current | Allow Recieving Security Failure messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17 | NodesnMspsDhcp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1 | NodesnMspsDhcpClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.1 | ScalarsnMspsDhcpClientControl | read-write | current | The value enabled(1) will run DHCP Client. The value disabled(2) will inhibit DHCP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.2 | ScalarsnMspsDhcpClientMode | read-write | current | The value enabled-via-mac-address(1) sets DHCP Client Mode with option MAC Address as ClientId, enabled-via-client-id(2) runs DHCP Client Mode with option Clie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.3 | ScalarsnMspsDhcpClientConfigFileRequest | read-write | current | If enabled(1) DHCP client requests option 66/67 . |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.4 | ScalarsnMspsDhcpClientId | read-write | current | An administratively-assigned name for this DHCP client. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.5 | ScalarsnMspsDhcpClientIPAddrKeepAlive | read-write | current | If enabled (1) DHCP client will retain the ip address from server accordingly to MSPS requirements. If disabled(2) DHCP client reset the ip address to 0.0.0.0 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10 | NodesnMspsDhcpClientDUID | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.1 | ScalarsnMspsDhcpClientDuidType | read-write | current | This Object contains the type of DUID. Client sends the Client Identifier TLV in the client sending messages. The value dtLlt(1) indicates that DHCP client wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.2 | ScalarsnMspsDhcpClientDuidLltValue | read-only | current | This Object contains the value of Link-layer Address plus Time DUID. This DUID value is used by client if dtLlt is selected in snMspsDhcpClientDuidType. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.3 | ScalarsnMspsDhcpClientDuidEnValue | read-only | current | This object contains the value of vendor-assigned unique ID based on Enterprise Number DUID. This DUID value is used by client if dtEn is selected in snMspsDhc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.4 | ScalarsnMspsDhcpClientDuidLlValue | read-only | current | This Object contains the value of Link-layer address DUID. This DUID value is used by client if dtLl is selected in snMspsDhcpClientDuidType. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.5 | ScalarsnMspsDhcpClientDuidConfigStatus | read-write | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.15 | TablesnMspsDhcpClientOptTable | not-accessible | current | The dhcp options which are to be requested to server will be added as entries in this table. While sending out discover message, the options entries which are … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.15.1 | RowsnMspsDhcpClientOptEntry | not-accessible | current | An entry containing requested dhcp options and its values at a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.15.1.1 | ColumnsnMspsDhcpClientOptIfIndex | not-accessible | current | A unique identifier for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.15.1.2 | ColumnsnMspsDhcpClientOptType | not-accessible | current | The object identifies the option, this is the tag octet of the DHCP option. This option is one of the index in the snMspsDhcpClientOptTable. Option 0 denotes p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.15.1.3 | ColumnsnMspsDhcpClientOptLen | read-write | current | This object specifies the length of the DHCP Client Option. This length does not include the two octets specifiying the tag and length. This object has read-wr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.15.1.4 | ColumnsnMspsDhcpClientOptVal | read-write | current | This object specifies the octets of data, for the length specified by snMspsDhcpClientOptLen. This object has read-write support only for option 60. This value… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.15.1.5 | ColumnsnMspsDhcpClientOptRowStatus | read-create | current | The RowStatus variable is for addition and deletion of snMspsDhcpClientOptEntry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2 | NodesnMspsDhcpServer | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1 | IdentitysnMspsDhcpServerObjects | current | The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4 | IdentitysnMspsDhcpV4ServerObjects | current | The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1 | IdentitysnMspsDhcpV4SrvConfig | current | The MIB objects in this group define the Management Information Base objects with systemic scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1.1 | ScalarsnMspsDhcpV4SrvActivated | read-write | current | This is a control variable. It is written by the remote management entity. global DHCP server enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1.2 | ScalarsnMspsDhcpV4SrvIcmpEchoProbeActivated | read-write | current | This is a control variable. It is written by the remote management entity. When set to to true, the DHCP server will probe an IP address whether it is already … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1.12 | ScalarsnMspsDhcpV4SrvBootpClientsSupported | read-write | current | Indicates whether bootp clients are suppored by the dhcp server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1.16 | ScalarsnMspsDhcpV4SrvBootpAutomaticAddressEnabled | read-write | current | Indicates whether automatic address allocation to bootp clients is supported. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2 | TablesnMspsDhcpV4SrvSubnetPoolTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1 | RowsnMspsDhcpV4SrvSubnetPoolEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.1 | ColumnsnMspsDhcpV4SrvSubnetPoolIndex | not-accessible | current | An auxiliary index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.2 | ColumnsnMspsDhcpV4SrvSubnetPoolIfIndex | read-create | current | The ifIndex of the bound interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.3 | ColumnsnMspsDhcpV4SrvSubnetPoolSubnetAddr | read-create | current | The subnet address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.4 | ColumnsnMspsDhcpV4SrvSubnetPoolPrfxLength | read-create | current | The prefix length. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.5 | ColumnsnMspsDhcpV4SrvSubnetPoolLowerAddress | read-create | current | The lower IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.6 | ColumnsnMspsDhcpV4SrvSubnetPoolUpperAddress | read-create | current | The upper IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.7 | ColumnsnMspsDhcpV4SrvSubnetPoolLeaseTime | read-create | current | The lease time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.8 | ColumnsnMspsDhcpV4SrvSubnetPoolPortList | read-create | current | The Subnet Pool Port List. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.9 | ColumnsnMspsDhcpV4SrvSubnetPoolName | read-create | current | Name for the subnet pool.Null terminated string. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.12 | ColumnsnMspsDhcpV4SrvSubnetPoolRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3 | TablesnMspsDhcpV4SrvSubnetOptTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1 | RowsnMspsDhcpV4SrvSubnetOptEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.1 | ColumnsnMspsDhcpV4SrvSubnetOptCode | not-accessible | current | This is a control variable. It is written by the remote management entity. The DHCP option tag code. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.2 | ColumnsnMspsDhcpV4SrvSubnetOptUseIfIp | read-write | current | This is a control variable. It is written by the remote management entity. Use the interface's IP address from the subnet specified by the pool if applicable t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.3 | ColumnsnMspsDhcpV4SrvSubnetOptLength | read-create | current | This is a control variable. It is written by the remote management entity. The length of the options's data part not including the two octets specifying the ta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.4 | ColumnsnMspsDhcpV4SrvSubnetOptValue | read-create | current | This is a control variable. It is written by the remote management entity. The data part of the DHCP option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.7 | ColumnsnMspsDhcpV4SrvSubnetOptRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4 | TablesnMspsDhcpV4SrvHostTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1 | RowsnMspsDhcpV4SrvHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.1 | ColumnsnMspsDhcpV4SrvHostHwType | not-accessible | current | The hardware type as defined in STD 2. E.g. a value of 1 means Ethernet, and a value 0 denotes a c a non-HW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.2 | ColumnsnMspsDhcpV4SrvHostClientId | not-accessible | current | This is a control variable. It is written by the remote management entity. The data part of the DHCP option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.3 | ColumnsnMspsDhcpV4SrvHostAddress | read-create | current | The desired IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.11 | ColumnsnMspsDhcpV4SrvHostComment | read-write | current | The object represents the comment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.12 | ColumnsnMspsDhcpV4SrvHostRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7 | TablesnMspsDhcpV4SrvBindTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1 | RowsnMspsDhcpV4SrvBindEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.1 | ColumnsnMspsDhcpV4SrvBindIpAddress | not-accessible | current | IpAddress associated with the binding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.4 | ColumnsnMspsDhcpV4SrvBindHwType | read-only | current | Hardware address type of the binding. Value 0, Indicates client identifier. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.7 | ColumnsnMspsDhcpV4SrvBindHwAddress | read-only | current | Hardware address of the binding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.10 | ColumnsnMspsDhcpV4SrvBindExpireTime | read-only | current | Indicates time remaining for the binding. Negative Values indicate already expired binding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.13 | ColumnsnMspsDhcpV4SrvBindAllocMethod | read-only | current | Indicates the binding is for statically assigned ip-address or automatically assigned from the pool. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.16 | ColumnsnMspsDhcpV4SrvBindState | read-only | current | State of the binding. In offered state offer has been sent, but no req has been received from the client.In assigned state the address is assigned to the clien… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.19 | ColumnsnMspsDhcpV4SrvBindXid | read-only | current | Transaction ID, a random number chosen by the client, used by the client and server to associate messages and responses between a client and a server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.22 | ColumnsnMspsDhcpV4SrvBindPoolID | read-only | current | ID of pool containing the automatically assigned IpAddress. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.30 | ColumnsnMspsDhcpV4SrvBindOptionCode82RemoteIdValue | read-only | current | Remote ID value. Empty, if Option 82 is not supported by device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.31 | ColumnsnMspsDhcpV4SrvBindOptionCode82CircuitIdValue | read-only | current | Circuit ID value. Empty, if Option 82 is not supported by device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.45 | ColumnsnMspsDhcpV4SrvBindRowStatus | read-write | current | Binding entry status. Only DESTROY (6) is the allowed configurable value. If the entry is present value will be ACTIVE. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12 | TablesnMspsDhcpV4SrvSubnetOptionCode82Table | not-accessible | current | DHCP subnet option code 82 table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1 | RowsnMspsDhcpV4SrvSubnetOptionCode82Entry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.1 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex | not-accessible | current | Auxilary Index of snMspsDhcpV4SrvSubnetOptionCode82Table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.2 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue | read-write | current | Remote ID value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.3 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue | read-write | current | Remote ID value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.10 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82RowStatus | read-create | current | This object is the status of the row |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13 | TablesnMspsDhcpV4SrvHostOptTable | not-accessible | current | This table contains the host specific options that are to be used by the server on response to a DHCP DISCOVER message in a DHCP OFFER message. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1 | RowsnMspsDhcpV4SrvHostOptEntry | not-accessible | current | The various option objects common to all DHCP offer messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.1 | ColumnsnMspsDhcpV4SrvHostType | not-accessible | current | This object identifies the type of host identifier, whether this host specific entry is based on hardware or non-hardware of the client. This option is one of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.2 | ColumnsnMspsDhcpV4SrvHostId | not-accessible | current | The object identifies the host.This id is an index to this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.3 | ColumnsnMspsDhcpV4SrvHostOptType | not-accessible | current | The object identifies the option, this is the tag octet of the DHCP option. This option is the index in the snMspsDhcpV4SrvSubnetOptTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.4 | ColumnsnMspsDhcpV4SrvHostOptLen | read-write | current | This object identifies the length of the option indicated by the option type. This length does not include the two octets specifiying the tag and length. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.5 | ColumnsnMspsDhcpV4SrvHostOptVal | read-write | current | This object identifies the octets of data, of length specified by snMspsDhcpV4SrvHostOptLen for that entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.10 | ColumnsnMspsDhcpV4SrvHostOptRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.6 | IdentitysnMspsDhcpV6ServerObjects | current | The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4 | NodesnMspsDhcpClient6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0 | NodesnMspsDhcpClient6Config | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1 | TablesnMspsDhcpClient6IfTable | not-accessible | current | This table contains the config info of DHCPv6 Client on each interface. using this table user can enable or disable DHCPv6 client(statefull or stateless or pre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1 | RowsnMspsDhcpClient6IfEntry | not-accessible | current | Entries of the snMspsDhcpClient6CounterTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.1 | ColumnsnMspsDhcpClient6IfIndex | not-accessible | current | Index of one entry in snMspsDhcpClient6IfTable.and indicates interface index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.2 | ColumnsnMspsDhcpClient6IfMode | read-write | current | Currently 3 different DHCP client types available. 1.Statefull dhcp(sf-dhcp) client.Using sf-dhcp client node will get address and other information from serve… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.3 | ColumnsnMspsDhcpClient6IfRapidCommitMode | read-write | current | The Rapid Commit mode is used to signal the use of the two message exchange for address or prefix assignment.if user set this option to true(1) then client wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.4 | ColumnsnMspsDhcpClient6IfSrvAddress | read-only | current | The object indicates the IP Address of the current DHCP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.5 | ColumnsnMspsDhcpClient6IfDuidType | read-write | current | This Object contains the type of DUID. Client sends the Client Identifier TLV in the client sending messages. The value dtLlt(1) indicates that DHCP client wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.6 | ColumnsnMspsDhcpClient6IfDuid | read-only | current | This Object contains the value of DUID used as client ID. Depending upon the snMspsDhcpClient6ClientIdType this will return the current value of the DUID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.7 | ColumnsnMspsDhcpClient6IfDuidIfIndex | read-write | current | Interface which will be used for formation of DUID Based on Link-layer Address plus Time and DUID based on Link-layer Address, if not specified then an arbitra… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.8 | ColumnsnMspsDhcpClient6IfMinRefreshTime | read-write | current | This objects specifies the minimum acceptable information refresh time. If the server sends an information refresh time option of less than the configured mini… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.9 | ColumnsnMspsDhcpClient6IfCurrRefreshTime | read-only | current | This objects specifies the current information refresh time. The value of current refresh timer will be the minimum value of snMspsDhcpClient6IfMinRefreshTime … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.10 | ColumnsnMspsDhcpClient6IfRealmName | read-write | current | This object contains the unique name of the container for the HMAC-MD5 authentication key. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.11 | ColumnsnMspsDhcpClient6IfKey | read-write | current | This object indicates the HMAC-MD5 key string which will be used to authenticate the client sending messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.12 | ColumnsnMspsDhcpClient6IfKeyId | read-write | current | This object indentifies the key-ID to be used with snMspsDhcpClient6AuthKey object and is transmitted as part of authentication information in client sending m… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.13 | ColumnsnMspsDhcpClient6IfPrefixName | read-write | current | The object indicates IPv6 Prefix name for prefix assigned by dhcpv6 server. This obeject should be set if snMspsDhcpClient6IfMode object is set to pd(3). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.14 | ColumnsnMspsDhcpClient6IfIataOptStatus | read-write | current | The object indicates IATA opt enable or disable status.if user set this option to true(1) then client will get Temporary Addresses from server. If user set thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.15 | ColumnsnMspsDhcpClient6IfPdExcludePrefix | read-only | current | The object indicates the IPv6 exclude prefix from the DHCPv6 server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.16 | ColumnsnMspsDhcpClient6IfPdExcludePrefixLen | read-only | current | The length of the excluded prefix in bits. The prefix-len MUST be between 'OPTION_IAPREFIX prefix-length'+1 and 128. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.17 | ColumnsnMspsDhcpClient6IfReconfigAcceptMode | read-write | current | A client uses the Reconfigure Accept option to announce to the server whether the client is willing to accept Reconfigure messages, and a server uses this opti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.18 | ColumnsnMspsDhcpClient6IfRowStatus | read-write | current | This object is used to create/delete a row in the interface table. when the interface is deleted from the system the corresponding row from this table will als… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2 | TablesnMspsDhcpClient6OptionTable | not-accessible | current | The Dhcpv6 options which are to be requested to server will be added as entries in this table. While sending out client sending messages(ex:solicit,information… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1 | RowsnMspsDhcpClient6OptionEntry | not-accessible | current | The Client Option Table entry. This entry is not lost upon reboot. It is backed up by stable storage. Each entry in this table contains the required attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.1 | ColumnsnMspsDhcpClient6OptionType | not-accessible | current | The object identifies the option, this is the tag octet of the DHCP option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.2 | ColumnsnMspsDhcpClient6OptionLength | read-write | current | This object identifies the length of the option indicated by the option type. This length does not include the octets specifying the type and length. This obje… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.3 | ColumnsnMspsDhcpClient6OptionValue | read-write | current | This object identifies the octets of data, of length specified by snMspsDhcpClient6OptionLength for that entry. This object has read-write support only for som… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.4 | ColumnsnMspsDhcpClient6OptionRowStatus | read-write | current | The RowStatus variable is for addition and deletion of snMspsDhcpClient6OptionEntry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3 | TablesnMspsDhcpClient6IfIaOptTable | not-accessible | current | This table maintains the interface Ia option information got from server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1 | RowsnMspsDhcpClient6IfIaOptEntry | not-accessible | current | The client Ia Opt Table entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.1 | ColumnsnMspsDhcpClient6IfIaOptType | not-accessible | current | Index of the Ia option info.this obj contains IANA(3) or IATA(4) or IAPD(25) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.2 | ColumnsnMspsDhcpClient6IfIaOptIaid | read-only | current | The object indicates the Ia option of IAID value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.3 | ColumnsnMspsDhcpClient6IfIaOptRenewTime | read-only | current | This objects specifies the prefix/address renew time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.4 | ColumnsnMspsDhcpClient6IfIaOptRebindTime | read-only | current | This objects specifies the prefix/address rebind time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.5 | ColumnsnMspsDhcpClient6IfIaOptPrefixAddress | read-only | current | The object indicates the IPv6 Prefix or address from the DHCPv6 server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.6 | ColumnsnMspsDhcpClient6IfIaOptPrefixLen | read-only | current | The length of the prefix or address (in bits). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.7 | ColumnsnMspsDhcpClient6IfIaOptPreferedLifeTime | read-only | current | This object specifies the Prefix or address preferred lifetime in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.8 | ColumnsnMspsDhcpClient6IfIaOptValidLifeTime | read-only | current | This object specifies the Prefix or address valid lifetime in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4 | TablesnMspsDhcpClient6PdSubClntIfTable | not-accessible | current | This table maintains the ipv6 address configuration information using PD client Prefix got from server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1 | RowsnMspsDhcpClient6PdSubClntIfEntry | not-accessible | current | The PD sub client Table entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.1 | ColumnsnMspsDhcpClient6PdSubClntIfIndex | not-accessible | current | Index of the interface to configure ipv6 address using PD client got prefix from server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.2 | ColumnsnMspsDhcpClient6PdSubClntIfPrefixName | not-accessible | current | The object indicates the IPv6 PD Prefix name assigned by user using snMspsDhcpClient6IfPrefixName object. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.3 | ColumnsnMspsDhcpClient6PdSubClntIfPrefix | not-accessible | current | The object indicates the IPv6 Prefix to configure address using snMspsDhcpClient6PdSubClntIfPrefixName.This is a binary string of up to 16 octets in network by… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.4 | ColumnsnMspsDhcpClient6PdSubClntIfPrefixLength | not-accessible | current | The length of the prefix (in bits).and should be greater than snMspsDhcpClient6PrefixLength. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.5 | ColumnsnMspsDhcpClient6PdSubClntIfPrefixAddress | read-only | current | The object indicates the IPv6 complete address configure to interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.6 | ColumnsnMspsDhcpClient6PdSubClntIfRowStatus | read-write | current | The RowStatus variable is for addition and deletion of snMspsDhcpClient6PdSubClntIfEntry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1 | NodesnMspsDhcpClient6Counters | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1 | TablesnMspsDhcpClient6IfCounterTable | not-accessible | current | This table contains the statistics of DHCPv6 Client on each interface. It will give the no of messages sent and received at any time |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1 | RowsnMspsDhcpClient6IfCounterEntry | not-accessible | current | Entries of the dhcpClientCounterTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.1 | ColumnsnMspsDhcpClient6IfSolicitSendCount | read-only | current | The number of Solicit packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.2 | ColumnsnMspsDhcpClient6IfAdvertiseRcvCount | read-only | current | The number of advertise packets received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.3 | ColumnsnMspsDhcpClient6IfRequestSendCount | read-only | current | The number of request packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.4 | ColumnsnMspsDhcpClient6IfConformSendCount | read-only | current | The number of conform packets transmitted from the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.5 | ColumnsnMspsDhcpClient6IfRenewSendCount | read-only | current | The number of renew packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.6 | ColumnsnMspsDhcpClient6IfRebindSendCount | read-only | current | The number of rebind packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.7 | ColumnsnMspsDhcpClient6IfReplyRcvCount | read-only | current | The number of reply packets received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.8 | ColumnsnMspsDhcpClient6IfReleaseSendCount | read-only | current | The number of release packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.9 | ColumnsnMspsDhcpClient6IfDeclineSendCount | read-only | current | The number of decline packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.10 | ColumnsnMspsDhcpClient6IfReconfigureRcvCount | read-only | current | The number of reconfigure packets received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.11 | ColumnsnMspsDhcpClient6IfInformSendCount | read-only | current | The number of information packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.12 | ColumnsnMspsDhcpClient6IfInvalidPktRcvCount | read-only | current | The number of Invalid packet received on the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.13 | ColumnsnMspsDhcpClient6IfHmacFailCount | read-only | current | This object identifies the number of unauthenticated messages received on the interface. This counter increment only when Authentication TLV is present in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.14 | ColumnsnMspsDhcpClient6IfCounterReset | read-write | current | This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'.This … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19 | NodesnMspsSntp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1 | NodesnMspsSntpClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.1 | ScalarsnMspsSntpAdminStatus | read-write | current | To enable or disable the sntp client module. All configuration will be acitve only when the SNTP module is enabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.2 | ScalarsnMspsSntpClientVersion | read-write | current | The SNTP client module can run in any one version 1, version 2, version 3 or version 4. All the SNTP requests are sent out with the current configured version … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.3 | ScalarsnMspsSntpClientAddressingMode | read-write | current | unicast: - SNTP client operates in a point-to-point fashion. A unicast client sends a request to a designated server at its unicast address and expects a reply… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.4 | ScalarsnMspsSntpClientPort | read-write | current | The SNTP client module by default listens on well-know port number 123. When required, the Administrator can change the SNTP Client port value to non-default. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.5 | ScalarsnMspsSntpTimeDisplayFormat | read-write | current | The administrator can view the system time in 12 hr AM/PM or 24 hours format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.6 | ScalarsnMspsSntpAuthKeyId | read-write | current | Key Identifier is an integer identifying the cryptographic key used to generate the message-authentication code |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.7 | ScalarsnMspsSntpAuthAlgorithm | read-write | current | When the NTP authentication scheme is implemented, the Key Identifier and Message Digest fields contain the message authentication code (MAC) information. Mess… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.8 | ScalarsnMspsSntpAuthKey | read-write | current | Authentication key is cryptographic key that is used to implement NTP Authentication |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.9 | ScalarsnMspsSntpTimeZone | read-write | current | To set the system time zone with respect to UTC. ie plus indicates forward time zone ( ahead of UTC Time eg: +05:30) and minus indicates backward time zone (be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.10 | ScalarsnMspsSntpDSTStartTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.11 | ScalarsnMspsSntpDSTEndTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.12 | ScalarsnMspsSntpServerAutoDiscovery | read-write | current | The SNTP servers can be configured or discovered. When Auto Discover is disabled, the SNTP client gets the time from the configured servers. When Auto Discover… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.13 | ScalarsnMspsSntpUnicastPollInterval | read-write | current | The number of seconds between successive SNTP request transmissions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.14 | ScalarsnMspsSntpUnicastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out' |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.15 | ScalarsnMspsSntpUnicastPollRetry | read-write | current | The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16 | TablesnMspsSntpUnicastServerTable | not-accessible | current | The table contains configured SNTP/NTP servers in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1 | RowsnMspsSntpUnicastServerEntry | not-accessible | current | Each entry in the table contains necessary information to send SNTP request to the servers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.1 | ColumnsnMspsSntpUnicastServerAddrType | not-accessible | current | The Address type of the unicast server in the Unicast Addressing mode. It can be IPv4 or IPv6 unicast address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.2 | ColumnsnMspsSntpUnicastServerAddr | not-accessible | current | The unicast IPv4/IPv6 server address in the Unicast Addressing mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.3 | ColumnsnMspsSntpUnicastServerVersion | read-write | current | the sntp version supported by the server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.4 | ColumnsnMspsSntpUnicastServerPort | read-write | current | the sntp port on which the server is UP |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.5 | ColumnsnMspsSntpUnicastServerType | read-write | current | In Unicast addressing mode, we can have primary and secondary servers. This flag is to distinguish between primary and secondary server. SNTP client sends requ… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.6 | ColumnsnMspsSntpUnicastServerLastUpdateTime | read-only | current | The local time when the system time was successful |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.7 | ColumnsnMspsSntpUnicastServerTxRequests | read-only | current | The number of SNTP request sent in the Unicast addressing mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.8 | ColumnsnMspsSntpUnicastServerRowStatus | read-write | current | The activation of a row adds server entry. The destruction of a row removes server entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.17 | ScalarsnMspsSntpSendRequestInBcastMode | read-write | current | when enabled the sntp request will be sent to the broadcast server to calculate the dealy time. This is valid only in broadcast addressing mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.18 | ScalarsnMspsSntpPollTimeoutInBcastMode | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This is valid only in broadcast addressing … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.19 | ScalarsnMspsSntpDelayTimeInBcastMode | read-write | current | The broadcast server may send reply for the request. When the SNTP client does get response from the boradcast server, this value is taken as delay time |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.23 | ScalarsnMspsSntpSendRequestInMcastMode | read-write | current | when enabled the sntp request will be sent to the multicast server to calculate the dealy time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.24 | ScalarsnMspsSntpPollTimeoutInMcastMode | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out' |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.25 | ScalarsnMspsSntpDelayTimeInMcastMode | read-write | current | this is taken as delay time when there is no response from the multicast server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.26 | ScalarsnMspsSntpGrpAddrTypeInMcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.27 | ScalarsnMspsSntpGrpAddrInMcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.33 | ScalarsnMspsSntpAnycastPollInterval | read-write | current | The number of seconds between successive SNTP request transmissions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.34 | ScalarsnMspsSntpAnycastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.35 | ScalarsnMspsSntpAnycastPollRetry | read-write | current | The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.36 | ScalarsnMspsSntpServerTypeInAcastMode | read-write | current | To set the type of servers to be used in Anycast addressing mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.37 | ScalarsnMspsSntpGrpAddrTypeInAcastMode | read-write | current | The address type of the server configured by the administrator |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.38 | ScalarsnMspsSntpGrpAddrInAcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20 | NodesnMspsHttp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.1 | ScalarsnMspsHttpRedirectionStatus | read-write | current | The status of the HTTP redirection |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.2 | ScalarsnMspsHttpToHttpsRedirectionStatus | read-write | current | The status of the HTTP to HTTPS redirection. If device do not support this feature, the value of this MIB object can not be set to true. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4 | TablesnMspsHttpRedirectionTable | not-accessible | current | The (conceptual) table listing the Redirection related objects |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1 | RowsnMspsHttpRedirectionEntry | not-accessible | current | An entry (conceptual row) in the snMspsHttpRedirectionTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.1 | ColumnsnMspsHttpRedirectionURL | not-accessible | current | The URL which has to be redirected |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.2 | ColumnsnMspsHttpRedirectedSrvAddrType | read-write | current | The Address type of HTTP server to which URL has to be redirected |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.3 | ColumnsnMspsHttpRedirectedSrvIP | read-write | current | The IP address of the HTTP Server to which redirect has to be done interface belongs to |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.4 | ColumnsnMspsHttpRedirectedSrvDomainName | read-write | current | The domain name of the HTTP server to which the URL has to be has to redirected |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.5 | ColumnsnMspsHttpRedirectionEntryStatus | read-create | current | The status of HTTP redirection table entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.7 | ScalarsnMspsWBMTimeOut | read-write | current | Time out for the Web-Based-Management in seconds. Range 60s to 3600s. If value is 0, timeout is disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.8 | ScalarsnMspsWBMDefaultLoginPage | read-write | current | Default login page for the Web-Based-Management. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.9 | ScalarsnMspsWBMDefaultStartPage | read-write | current | Start page for the Web-Based-Management. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.10 | ScalarsnMspsHttpPort | read-write | current | The port to be used by the hosts/PC to configure the device using the Web Interface Allowed values are default port and ports in the user(1024-49151), dynamic(… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.11 | ScalarsnMspsHttpStatus | read-write | current | This object is for enabling or disabling HTTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.15 | ScalarsnMspsHttpSslSecureHttpMinTlsVersion | read-write | current | This object holds the configuration of the minimum Tls Version for secure HTTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.16 | ScalarsnMspsHttpSslSecureHttpStatus | read-write | current | This object is for enabling or disabling secure HTTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.17 | ScalarsnMspsHttpSslPort | read-write | current | This object is to configure the SSL port. Allowed values are default port and ports in the user(1024-49151), dynamic(49500-65535) port ranges. Get operation re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.18 | ScalarsnMspsHttpSshStatus | read-write | current | This object is for enabling or disabling ssh in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.19 | ScalarsnMspsHttpSshPort | read-write | current | SSh service's server listening port. Allowed values are default port and ports in the user(1024-49151), dynamic(49500-65535) port ranges. Get operation return … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.20 | ScalarsnMspsHttpSshKexAlgorithmLevel | read-write | current | This object holds the configuration of the ssh key exchange algorithm level in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.23 | ScalarsnMspsHttpTelnetPort | read-write | current | Telnet service's server listening port. Allowed values are default port and ports in the user(1024-49151), dynamic(49500-65535) port ranges. Get operation retu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.26 | ScalarsnMspsHttpTlsCertFilename | read-write | current | TLS certificate filename for HTTPS. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.29 | ScalarsnMspsHttpTlsRootCaCertFilename | read-write | current | TLS Root-CA certificate filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.32 | ScalarsnMspsHttpTlsCrlFilename | read-write | current | TLS certificate revocation list filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.35 | ScalarsnMspsHttpSshPrivKeyEcdsaFilename | read-write | current | SSH Private Key (ECDSA) filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.38 | ScalarsnMspsHttpSshPrivKeyRsaFilename | read-write | current | SSH Private Key (RSA) filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21 | NodesnMspsSyslog | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1 | NodesnMspsSyslogClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.2 | ScalarsnMspsSyslogTimeStamp | read-write | deprecated | Currently this object is not used. Timestamp is a mandatory field in Syslog Message format |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.3 | ScalarsnMspsSyslogConsoleLog | read-write | current | This object is for enabling or disabling the console log option. When enabled, the messages (log and email alert messages) sent to the server will be displayed… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.4 | ScalarsnMspsSyslogSysBuffers | read-write | current | Number of log buffers to be allocated in the system |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.5 | ScalarsnMspsSyslogSmtpPort | read-write | current | Specifies the mail server Port to be used for sending email alerts. By default the the port is 25 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6 | TablesnMspsSyslogConfigTable | not-accessible | current | A table for configuring module specific log levels. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6.1 | RowsnMspsSyslogConfigEntry | not-accessible | current | An entry containing logging level options for a particular module. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6.1.1 | ColumnsnMspsSyslogConfigModule | not-accessible | current | Specifies the module for which the log level option has to be configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6.1.2 | ColumnsnMspsSyslogConfigLogLevel | read-write | current | Specifies the log level option to be set for a specific module. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.7 | ScalarsnMspsSyslogFacility | read-write | current | The Syslog standard facilities. The facility to be used when sending Syslog messages to this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.8 | ScalarsnMspsSyslogRole | read-write | current | Syslog supports two type of roles one is Device and other is Relay Device can generate and forward the syslog message Relay can receive , generate and forward … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.9 | ScalarsnMspsSyslogLogFile | read-write | current | Syslog supports storing of syslog messages in the file as configured by admin This object is used to enable or disable the syslog local storage By default the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.10 | ScalarsnMspsSyslogMail | read-write | current | Syslog supports sending syslog message to any mail-id as configured by the admin This object is used to enable or disable the syslog mail storage By default th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.11 | ScalarsnMspsSyslogProfile | read-write | current | Beep supports two types of profile. One is raw other is cooked profile. This object is used to set the profile for beep By default the beep profile is raw. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.12 | ScalarsnMspsSyslogRelayPort | read-write | current | This object is used to configure port in which the relay listens Irrespective of the transport type, the relay opens the socket and listen on the port configur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.13 | ScalarsnMspsSyslogRelayTransType | read-write | current | Relay supports UDP and TCP transport type.When the transport type is configured as UDP, relay receives syslog messages via UDP socket.When the transport type i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.14 | ScalarsnMspsSyslogFileNameOne | read-write | current | Syslog can store the messages locally in three different files.This scalar is to get the file name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.15 | ScalarsnMspsSyslogFileNameTwo | read-write | current | Syslog can store the messages locally in three different files.This scalar is to get the file name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.16 | ScalarsnMspsSyslogFileNameThree | read-write | current | Syslog can store the messages locally in three different files.This scalar is to get the file name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17 | TablesnMspsSyslogFileTable | not-accessible | current | A table containing entries of priority and filename. Both priority and file name is considered as index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1 | RowsnMspsSyslogFileEntry | not-accessible | current | A table containing entries of priority,file name. Both priority and file name is considered as index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1.1 | ColumnsnMspsSyslogFilePriority | not-accessible | current | This Object specifies the priority for which it should be written in file. Priority value ranges from 0 to 191 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1.2 | ColumnsnMspsSyslogFileName | not-accessible | current | This object specifies the file name to which syslog message is written. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1.3 | ColumnsnMspsSyslogFileRowStatus | read-write | current | This object specifies the Status of the File Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.18 | ScalarsnMspsSyslogLogSrvAddr | read-write | deprecated | Currently this object is is not used. Instead snMspsSyslogFwdServerIP is used for configuring syslog server IP for remote logging. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20 | TablesnMspsSyslogFwdTable | not-accessible | current | A table containing entries of priority, server address type, server address, port, transport type, and TLS support for each configured server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1 | RowsnMspsSyslogFwdEntry | not-accessible | current | A table containing index as priority , server address type and server address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.1 | ColumnsnMspsSyslogFwdPriority | not-accessible | current | Specifies the priority which is to be forwarded to the desired server. Priority can take the value from 0 to 191. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.2 | ColumnsnMspsSyslogFwdAddressType | not-accessible | current | Specifies the Address type of server.Address type shall be ipv4 or ipv6. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.3 | ColumnsnMspsSyslogFwdServerIP | not-accessible | current | Specifies the ServerIP to which the syslog shall be forwarded. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.4 | ColumnsnMspsSyslogFwdPort | read-write | current | Specifies the Port through which it can send the syslog message. By default the the port is 514 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.5 | ColumnsnMspsSyslogFwdTransType | read-write | current | Specifies the Transport type using which it can send syslog message. By default the tranport type is udp |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.6 | ColumnsnMspsSyslogFwdRowStatus | read-write | current | The Status of the Fwd Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.7 | ColumnsnMspsSyslogFwdTlsSupport | read-write | current | This object is for enabling or disabling the Transport Layer Security(TLS) option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.10 | ColumnsnMspsSyslogFwdTlsRootCaCert | read-write | current | TLS Root-CA certificate filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.13 | ColumnsnMspsSyslogFwdTlsCrl | read-write | current | TLS certificate revocation list filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.21 | ScalarsnMspsSyslogSmtpSrvAddr | read-write | deprecated | Currently this object is not used. snMspsSyslogMailServAdd is used for specifing the mail server IP to be used for sending email alerts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.22 | ScalarsnMspsSyslogSmtpRcvrMailId | read-write | deprecated | Currently this object is not used. snMspsSyslogRxMailId is used for specifing the receiver mail ID for email alerts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.23 | ScalarsnMspsSyslogSmtpSenderMailId | read-write | current | Specifies the sender mail ID for email alerts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24 | TablesnMspsSyslogMailTable | not-accessible | current | A table containing entries of priority,mail server address type,mail server address and receiver mail id |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1 | RowsnMspsSyslogMailEntry | not-accessible | current | Mail Table contains index as priority , mail server address type and mail server address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.1 | ColumnsnMspsSyslogMailPriority | not-accessible | current | Specifies the priority which is to be mailed. Priority can be in the range 0 to 191 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.2 | ColumnsnMspsSyslogMailServAddType | not-accessible | current | Specifies the Mail Server Address Type. Address type can be ipv4 or ipv6 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.3 | ColumnsnMspsSyslogMailServAdd | not-accessible | current | Specifies the Mail Server ip. Server Address can be ipv4 or ipv6 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.4 | ColumnsnMspsSyslogRxMailId | read-write | current | Currently this object is not used. snMspsSyslogMailReceiverTable is used for specifing the receiver mail ID for email alerts |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.5 | ColumnsnMspsSyslogMailRowStatus | read-write | current | Specifies RowStatus of the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.8 | ColumnsnMspsSyslogMailPort | read-write | current | Specifies the port of the Mail Entry. By default the port is 25 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.11 | ColumnsnMspsSyslogMailSender | read-write | current | Specifies the sender mail ID for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.14 | ColumnsnMspsSyslogMailUsername | read-write | current | Specifies the username for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.17 | ColumnsnMspsSyslogMailPassword | read-write | current | Specifies the password for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.20 | ColumnsnMspsSyslogMailSecurity | read-write | current | Specifies the security for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.23 | ColumnsnMspsSyslogMailTlsRootCaCert | read-write | current | TLS Root-CA certificate filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.26 | ColumnsnMspsSyslogMailTlsCrl | read-write | current | TLS certificate revocation list filename. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25 | TablesnMspsSyslogMailReceiverTable | not-accessible | current | A table containing receiver entries for mail service |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1 | RowsnMspsSyslogMailReceiverEntry | not-accessible | current | Mail receiver table contains index as priority , mail server address type, mail server address and Index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.1 | ColumnsnMspsSyslogMailReceiverServerPriority | not-accessible | current | This object represents snMspsSyslogMailPriority |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.2 | ColumnsnMspsSyslogMailReceiverServerAddressType | not-accessible | current | This object represents snMspsSyslogMailServAddType |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.3 | ColumnsnMspsSyslogMailReceiverServerAddress | not-accessible | current | This object represents snMspsSyslogMailServAdd |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.4 | ColumnsnMspsSyslogMailReceiverIndex | not-accessible | current | Index variable of snMspsSyslogMailReceiverTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.5 | ColumnsnMspsSyslogMailReceiverMailAddress | read-write | current | This object is used for specifing the receiver mail ID for email alerts |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.6 | ColumnsnMspsSyslogMailReceiverEnabled | read-write | current | This object informs whether the entry is active or inactive |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.100 | ColumnsnMspsSyslogMailReceiverRowStatus | read-write | current | Specifies RowStatus of the Receiver Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23 | NodesnMspsCplug | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.1 | ScalarsnMspsCplugState | read-only | current | Current status of the C-Plug. 1 - C-PLUG is not present 4 - C-PLUG is not accepted 5 - C-PLUG is accepted 6 - C-PLUG is in factory state 7 - C-PLUG is not pres… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.5 | ScalarsnMspsCplugDeviceGroup | read-only | current | Device Group string, which is currently stored on C-Plug |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.6 | ScalarsnMspsCplugDeviceType | read-only | current | Device Type string, which is currently stored on C-Plug |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.10 | ScalarsnMspsCplugInfo | read-only | current | Information about the C-PLUG as null terminated string |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.11 | ScalarsnMspsCplugErrNum | read-only | current | It displays the number of the last error. Following error codes are defined: 0 - C-PLUG has no Error 1 - C-PLUG is damaged 3 - C-PLUG can't be read 4 - C-PLUG … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.12 | ScalarsnMspsCplugFileSystem | read-only | current | The type of file system used on C-PLUG. Following file system types are defined: 0 - No file system found 1 - TFSS DOS 2 - IECP 3 - File system is not valid 4 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.13 | ScalarsnMspsCplugFileSystemSize | read-only | current | The total size of file system memory in bytes on C-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.14 | ScalarsnMspsCplugFileSystemUsage | read-only | current | The size of file system memory in bytes on C-PLUG, which is currently allocated |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.15 | ScalarsnMspsCplugConfRevision | read-only | current | The revision number of configuration, which is currently stored on the C-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.18 | ScalarsnMspsCplugFwOnPlugStatus | read-only | current | This status variable represents current state of feature 'Firmware on PLUG': 0 - The feature is not supported on device. 1 - Firmware file is present on PLUG. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.19 | ScalarsnMspsCplugFwOnPlugEnable | read-write | current | This control variable enables support of firmware file synchronization with PLUG. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.20 | ScalarsnMspsCplugFormat | read-write | current | Write access using factoryclean(1) initiates erasing the complete C-PLUG to factory default. Write access using write(2) initiates a factory clean and write of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25 | NodesnMspsSinema | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.1 | ScalarsnMspsSinemaInterfaceState | read-write | current | diagnose object for SINEMA interface state. It can be set to (1) Parameters Active, (2) New Parameters Loaded, (3) Activating Loaded Parameters , (4) Activatin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.2 | ScalarsnMspsSinemaAdminStatus | read-write | current | This object is for enabling / disabling availability of SCALANCE configuration interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.3 | ScalarsnMspsSinemaResult | read-write | current | Result of Configuration Event (CE) received from Sinema |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.4 | ScalarsnMspsSinemaErrorStatus | read-write | current | Status of the error received with respect to position of SNMP variables in TLV package |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.5 | ScalarsnMspsSinemaErrorIndex | read-write | current | Location of the error received with respect to position of SNMP variables in TLV package |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.10 | ScalarsnMspsSinemaFileUseStatus | read-write | current | This object is for enabling / disabling loading/saving SINEMA files via WBM |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.20 | TablesnMspsSinemaConfigSetTable | not-accessible | current | A list of SINEMA delta download config sets. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.20.1 | RowsnMspsSinemaConfigSetEntry | not-accessible | current | Each entry represents a delta download config set. Entry creation/deletion by user not possible |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.20.1.1 | ColumnsnMspsSinemaConfigSetIndex | not-accessible | current | Name of config set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.20.1.2 | ColumnsnMspsSinemaConfigSetHash | read-write | current | Hash of config set as recevied from engineering system |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.20.1.5 | ColumnsnMspsSinemaConfigSetState | read-write | current | State of config set. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26 | NodesnMspsLoadSave | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.1 | ScalarsnMspsLoadSaveRestartRequired | read-only | current | Represents current state of the device according to file transfer activities, which are done for files registered by Load & Save component. If the current stat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.2 | ScalarsnMspsLoadSaveCacheWriteCycleTime | read-write | current | cache buffer handling: defines how long(in seconds) changed values hold in temp buffer befor written to flash file. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5 | NodesnMspsLoadSavePasswords | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10 | TablesnMspsLoadSaveFilePasswordTable | not-accessible | current | Contains files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1 | RowsnMspsLoadSaveFilePasswordEntry | not-accessible | current | The row in the snMspsLoadSaveFilePasswordTable representing password settings of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.1 | ColumnsnMspsLoadSaveFileIndex | not-accessible | current | The unique string representing file type ID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.2 | ColumnsnMspsLoadSaveFileType | read-only | current | The file type ID of registered file. This string is identical to snMspsLoadSaveFileIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.5 | ColumnsnMspsLoadSaveFileEnablePassword | read-write | current | Set 'true' if this file type needs a configured password. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.10 | ColumnsnMspsLoadSaveFilePassword | read-write | current | The encrypted password value, which is used when accessing registered file. This value has to be entered by user. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.15 | ColumnsnMspsLoadSaveFilePasswordStatus | read-only | current | Current validation status of entered password. 0 - The password value is not considered by the file type. 1 - The password value stored in snMspsLoadSaveFilePa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10 | NodesnMspsLoadSaveTftp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.1 | ScalarsnMspsLoadSaveTftpServerAddress | read-write | deprecated | The IP address of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.2 | ScalarsnMspsLoadSaveTftpServerPort | read-write | current | The port number of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.5 | ScalarsnMspsLoadSaveTftpServerInetAddress | read-write | current | The Inet address of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.6 | ScalarsnMspsLoadSaveTftpServerInetAddressType | read-write | current | The Inet address type of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10 | TablesnMspsLoadSaveTftpFileTable | not-accessible | current | A list of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1 | RowsnMspsLoadSaveTftpFileEntry | not-accessible | current | The row in the snMspsLoadSaveTftpFileTable representing settings of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.1 | ColumnsnMspsLoadSaveTftpFileIndex | not-accessible | current | The unique string representing file type ID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.2 | ColumnsnMspsLoadSaveTftpFileType | read-only | current | The file type ID of registered file. This string is identical to snMspsLoadSaveTftpFileIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.3 | ColumnsnMspsLoadSaveTftpFileName | read-write | current | The file name of registered file. The file name can also contain the relative path starting from root folder of TFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.4 | ColumnsnMspsLoadSaveTftpFilePresent | read-only | current | Availability of the registered file on the device. 0 - the registered file is currently not present on device 1 - the registered file can be downloaded from de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.10 | ColumnsnMspsLoadSaveTftpFileLoadSupported | read-only | current | Represents whether the Load functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.11 | ColumnsnMspsLoadSaveTftpFileSaveSupported | read-only | current | Represents whether the Save functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.12 | ColumnsnMspsLoadSaveTftpFileDeleteSupported | read-only | current | Represents whether the Delete functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11 | TablesnMspsLoadSaveTftpFileTransferTable | not-accessible | current | This conceptual table is an extension of snMspsLoadSaveTftpFileTable and contains file triggers for initiate file operations with files registered by Load & Sa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1 | RowsnMspsLoadSaveTftpFileTransferEntry | not-accessible | current | The row in the snMspsLoadSaveTftpFileTransferTable representing file triggers of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1.1 | ColumnsnMspsLoadSaveTftpFileLoad | read-write | current | Write access using activate(2) initiates transfer of registered file from TFTP server to device, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1.2 | ColumnsnMspsLoadSaveTftpFileSave | read-write | current | Write access using activate(2) initiates transfer of registered file from device to TFTP server, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1.3 | ColumnsnMspsLoadSaveTftpFileDelete | read-write | current | Write access using activate(2) initiates deletion of registered file on TFTP server, if this functionality is supported for this file type. The support of func… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11 | NodesnMspsLoadSaveSftp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.1 | ScalarsnMspsLoadSaveSftpServerInetAddress | read-write | current | The IP address of SFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.2 | ScalarsnMspsLoadSaveSftpServerInetAddressType | read-write | current | The Inet address type of SFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.3 | ScalarsnMspsLoadSaveSftpServerPort | read-write | current | The port number of SFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.6 | ScalarsnMspsLoadSaveSftpServerUser | read-write | current | The user ID, which has to be allowed for login to SFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.7 | ScalarsnMspsLoadSaveSftpServerPassword | read-write | current | The user password, which has to be valid for login with user ID defined in snMspsLoadSaveSftpServerUser to SFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.8 | ScalarsnMspsLoadSaveSftpServerFingerprint | read-write | current | Hostkey fingerprint which has to be valid while establishing the ssh session with SFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10 | TablesnMspsLoadSaveSftpFileTable | not-accessible | current | A list of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1 | RowsnMspsLoadSaveSftpFileEntry | not-accessible | current | The row in the snMspsLoadSaveSftpFileTable representing settings of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.1 | ColumnsnMspsLoadSaveSftpFileIndex | not-accessible | current | The unique string representing file type ID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.2 | ColumnsnMspsLoadSaveSftpFileType | read-only | current | The file type ID of registered file. This string is identical to snMspsLoadSaveSftpFileIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.3 | ColumnsnMspsLoadSaveSftpFileName | read-write | current | The file name of registered file. The file name can also contain the relative path starting from root folder of SFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.4 | ColumnsnMspsLoadSaveSftpFilePresent | read-only | current | Availability of the registered file on the device. 0 - the registered file is currently not present on device 1 - the registered file can be downloaded from de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.10 | ColumnsnMspsLoadSaveSftpFileLoadSupported | read-only | current | Represents whether the Load functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.11 | ColumnsnMspsLoadSaveSftpFileSaveSupported | read-only | current | Represents whether the Save functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.12 | ColumnsnMspsLoadSaveSftpFileDeleteSupported | read-only | current | Represents whether the Delete functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11 | TablesnMspsLoadSaveSftpFileTransferTable | not-accessible | current | This conceptual table is an extension of snMspsLoadSaveSftpFileTable and contains file triggers for initiate file operations with files registered by Load & Sa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1 | RowsnMspsLoadSaveSftpFileTransferEntry | not-accessible | current | The row in the snMspsLoadSaveSftpFileTransferTable representing file triggers of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1.1 | ColumnsnMspsLoadSaveSftpFileLoad | read-write | current | Write access using activate(2) initiates transfer of registered file from SFTP server to device, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1.2 | ColumnsnMspsLoadSaveSftpFileSave | read-write | current | Write access using activate(2) initiates transfer of registered file from device to SFTP server, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1.3 | ColumnsnMspsLoadSaveSftpFileDelete | read-write | current | Write access using activate(2) initiates deletion of registered file on SFTP server, if this functionality is supported for this file type. The support of func… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27 | NodesnMspsWlan | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1 | IdentitysnMspsWlanObjects | current | The MIB objects in this group extend the definitions of the standard IEEEdot11-MIB. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1 | IdentitysnMspsWlanSmt | current | The objects in this group extend the Station ManagemenT attributes defined in the IEEEdot11-MIB. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1 | TablesnMspsWlanStationConfigTable | not-accessible | current | This table represents attributes that control the operation of a radio interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1.1 | RowsnMspsWlanStationConfigEntry | not-accessible | current | An entry in the snMspsWlanStationConfigTable, representing a radio's logic configuration attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1.1.1 | ColumnsnMspsWlanRadioMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1.1.2 | ColumnsnMspsWlanForceRoaming | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1.1.3 | ColumnsnMspsWlanPowerConstraintInfoRequired | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1.1.9 | ColumnsnMspsWlanMultiRadarDetectionEnabled | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This parameter can … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1.1.10 | ColumnsnMspsWlanPreferConfiguredDFSChannel | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This parameter can … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.1.1.15 | ColumnsnMspsWlanDynamicTransmitAntennaSelection | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This parameter enab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2 | IdentitysnMspsWlanSsid | current | The objects in this group define attributes that control association with a service set based on the SSID. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.1 | TablesnMspsWlanSsidConfigTable | not-accessible | current | This table represents attributes that control association behaviour of a station with a service set. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.1.1 | RowsnMspsWlanSsidConfigEntry | not-accessible | current | An entry in the snMspsWlanSsidConfigTable, representing the station's desired behaviour when associating with a service set. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.1.1.1 | ColumnsnMspsWlanSsidConfigAny | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.2 | TablesnMspsWlanSsidTable | not-accessible | current | This table represents attributes that control the set of SSID a station may interact with. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.2.1 | RowsnMspsWlanSsidEntry | not-accessible | current | An entry in the snMspsWlanSsidTable, representing a station's list of predefined SSIDs it may use. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.2.1.1 | ColumnsnMspsWlanSsidConfigIndex | not-accessible | current | This is an auxiliary index object which is used to identify instances of the columnar objects in the snMspsWlanSsidEntry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.2.1.2 | ColumnsnMspsWlanSsidConfigSsid | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object contains… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.2.1.3 | ColumnsnMspsWlanSsidConfigEnabled | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.2.2.1.6 | ColumnsnMspsWlanSsidSecurityContextID | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. Represents assignme… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.3 | TablesnMspsWlanAllowedChannelsConfigTable | not-accessible | current | This table represents the list of radio channels the station is administratively allowed to select during operation in order to control and restrict channel us… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.3.1 | RowsnMspsWlanAllowedChannelsConfigEntry | not-accessible | current | An entry in the snMspsWlanAllowedChannelsConfigTable, representing the administrative properties of a single channel. ifIndex - Each IEEE 802.11 interface is r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.3.1.1 | ColumnsnMspsWlanAllowedChannelsConfigFrequency | not-accessible | current | This is an index object which is used to identify instances of the columnar objects in the snMspsWlanAllowedChannelsConfigTable. The object represents the chan… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.3.1.2 | ColumnsnMspsWlanAllowedChannelsConfigChannelNumber | read-only | current | This is an auxiliary object. This object represents the channel frequency as a dimensionless (and possibly ambiguous) number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.3.1.3 | ColumnsnMspsWlanAllowedChannelsConfigAvailable | read-only | current | This is a control variable. It is written by the SME whenever the regulatory domain, the operating mode of the PHY, or any setting that affects the radiated po… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.3.1.4 | ColumnsnMspsWlanAllowedChannelsConfigEnabled | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This attribute, whe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4 | TablesnMspsWlanRoamingConfigTable | not-accessible | current | This table represents attributes that control a station's desired roaming behaviour. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1 | RowsnMspsWlanRoamingConfigEntry | not-accessible | current | An entry in the snMspsWlanRoamingConfigTable, representing a station's roaming attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.1 | ColumnsnMspsWlanRoamingThreshold | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.2 | ColumnsnMspsWlanBackgroundScanMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.3 | ColumnsnMspsWlanBackgroundScanInterval | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.4 | ColumnsnMspsWlanBackgroundScanThreshold | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.6 | ColumnsnMspsWlanScanCancel | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.7 | ColumnsnMspsWlanScanTimePerChannel | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.8 | ColumnsnMspsWlanDhcpRenew | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.11 | ColumnsnMspsWlanMinApSignalStrength | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.14 | ColumnsnMspsWlanForceHandover | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. Setting 'force-hand… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.4.1.17 | ColumnsnMspsWlanNextApChannelList | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object enables … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5 | TablesnMspsWlanHtStationConfigTable | not-accessible | current | This table represents attributes that control the operation of a high- throuput (HT, a.k.a. IEEE802.11n or MIMO) radio interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1 | RowsnMspsWlanHtStationConfigEntry | not-accessible | current | An entry in the snMspsWlanHtStationConfigTable, representing a radio's HT configuration attributes. A conceptual row will be created for those ifIndex values t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.1 | ColumnsnMspsWlanHtStationConfigAmpdu | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.2 | ColumnsnMspsWlanHtStationConfigAmpduFrames | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.3 | ColumnsnMspsWlanHtStationConfigAmpduBytes | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.4 | ColumnsnMspsWlanHtStationConfigChannelWidthDirection | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.5 | ColumnsnMspsWlanHtStationConfigVhtOperationMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This attribute conf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.6 | ColumnsnMspsWlanHtStationConfigHeOperationMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This attribute conf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.8 | ColumnsnMspsWlanHtStationConfigAmsdu | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.5.1.9 | ColumnsnMspsWlanHtStationConfigAmsduPktSize | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6 | IdentitysnMspsWlanSecurity | current | The objects in this group define attributes that control the security mechanisms a station employs to ensure the station's authenticity and a connection's priv… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.1 | TablesnMspsWlanStaSecurityTable | not-accessible | current | This table represents attributes that control the basic security mechanisms employed by a station. This table is not available in Client mode. Corresponding se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.1.1 | RowsnMspsWlanStaSecurityEntry | not-accessible | current | An entry in the snMspsWlanStaSecurityTable, representing a stations's security configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.1.1.1 | ColumnsnMspsWlanStaSecurityAuthType | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. An attempt to set t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.1.1.2 | ColumnsnMspsWlanStaSecurityCipher | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.1.1.3 | ColumnsnMspsWlanStaPSKPassPhrase | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. An alternative mann… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.1.1.6 | ColumnsnMspsWlanStaGroupRekeyTime | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The time in seconds… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2 | IdentitysnMspsWlanStaDot1x | current | The objects in this group define attributes that control IEEE 802.1x related configuration settings. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.1 | ScalarsnMspsWlanAuthenticatorReauthMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object determin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.2 | ScalarsnMspsWlanAuthenticatorReauthInterval | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object determin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.3 | ScalarsnMspsWlanAuthenticatorPrimaryAddrType | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.4 | ScalarsnMspsWlanAuthenticatorPrimaryAddress | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object determin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.6 | ScalarsnMspsWlanRadiusMinTlsVersion | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This object holds t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.7 | ScalarsnMspsWlanRadiusLegacyServerSupport | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This object provide… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10 | TablesnMspsWlanAuthenticatorTable | not-accessible | current | This table represents attributes that provide the authenticator with a set of authentication servers that it will contact in order to allow or deny a supplican… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1 | RowsnMspsWlanAuthenticatorEntry | not-accessible | current | An entry in the snMspsWlanAuthenticatorTable, representing a single authentication server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1.1 | ColumnsnMspsWlanAuthenticatorIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsWlanStaAuthenticatorTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1.2 | ColumnsnMspsWlanAuthenticatorAddrType | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1.3 | ColumnsnMspsWlanAuthenticatorAddress | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1.4 | ColumnsnMspsWlanAuthenticatorPortNumber | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1.5 | ColumnsnMspsWlanAuthenticatorSharedSecret | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1.8 | ColumnsnMspsWlanAuthenticatorMaximumRetransmission | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.10.1.9 | ColumnsnMspsWlanAuthenticatorRowStatus | read-create | current | This is a control variable. It is written by an external management entity. The object indicates the status of a conceptual row. To create a row in this table,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.12 | TablesnMspsWlanStaSupplicantTable | not-accessible | deprecated | This table represents attributes that provide a supplicant with the credentials necessary to authenticate itself. This table is deprecated and is not available… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.12.1 | RowsnMspsWlanStaSupplicantEntry | not-accessible | deprecated | An entry in the snMspsWlanStaSupplicantTable, representing the credentials used by the supplicant. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.12.1.1 | ColumnsnMspsWlanStaSupplicantCheckDot1xServerCertificate | read-write | deprecated | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.12.1.2 | ColumnsnMspsWlanStaSupplicantDot1xUsername | read-write | deprecated | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.12.1.3 | ColumnsnMspsWlanStaSupplicantDot1xPassword | read-write | deprecated | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.12.1.4 | ColumnsnMspsWlanStaSupplicantDot1xEapTypes | read-write | deprecated | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13 | TablesnMspsWlanRadiusSupplicantTable | not-accessible | current | This table represents attributes that provide a supplicant with the credentials necessary to authenticate itself. A conceptual row will internally be created f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1 | RowsnMspsWlanRadiusSupplicantEntry | not-accessible | current | An entry in the snMspsWlanRadiusSupplicantTable, representing the credentials used by the supplicant. This table augments snMspsWlanClientSecurityTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1.1 | ColumnsnMspsWlanRadiusSupplicantSecurityContextID | not-accessible | current | This is the augmented index from snMspsWlanClientSecurityTable. Represents assignment of corresponding RADIUS supplicant settings to relevant WLAN security con… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1.5 | ColumnsnMspsWlanRadiusSupplicantCheckDot1xServerCertificate | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1.10 | ColumnsnMspsWlanRadiusSupplicantDot1xUsername | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1.15 | ColumnsnMspsWlanRadiusSupplicantDot1xPassword | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1.20 | ColumnsnMspsWlanRadiusSupplicantDot1xEapTypes | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1.25 | ColumnsnMspsWlanRadiusSupplicantDot1xUserCert | read-write | current | This is a control variable. It is written by the local management entity. The distinguished name of a user certificate authority. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.2.13.1.28 | ColumnsnMspsWlanRadiusSupplicantDot1xServerCert | read-write | current | This is a control variable. It is written by the local management entity. The distinguished name of a server certificate authority. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.3 | TablesnMspsWlanVapCommunicationTable | not-accessible | current | This table represents attributes that control the communication paths available to all stations attached to a single service set. A conceptual row will be crea… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.3.1 | RowsnMspsWlanVapCommunicationEntry | not-accessible | current | An entry in the snMspsWlanVapCommunicationTable, representing a service set's allowed communition paths for connected stations. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.3.1.1 | ColumnsnMspsWlanVapCommunicationWithinOwnVap | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.3.1.2 | ColumnsnMspsWlanVapCommunicationWithOtherVap | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. All stations within… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.3.1.3 | ColumnsnMspsWlanVapCommunicationWithEthernet | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10 | TablesnMspsWlanClientSecurityTable | not-accessible | current | This table represents attributes that control the basic security mechanisms per context employed by a station in Client mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1 | RowsnMspsWlanClientSecurityEntry | not-accessible | current | An entry in the snMspsWlanClientSecurityTable, representing a security context configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.1 | ColumnsnMspsWlanClientSecurityContextID | not-accessible | current | The number of corresponding entry representing WLAN security settings within of relevant context |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.4 | ColumnsnMspsWlanClientSecurityAuthType | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. An attempt to set t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.7 | ColumnsnMspsWlanClientSecurityCipher | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.10 | ColumnsnMspsWlanClientSecurityPSKPassPhrase | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. An alternative mann… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.13 | ColumnsnMspsWlanClientSecurityEncryption | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When this attribute… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.16 | ColumnsnMspsWlanClientSecurityWEPKeyID | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This attribute indi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.19 | ColumnsnMspsWlanClientSecurityProtectedManagementFrames | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. With this setting, … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.10.1.30 | ColumnsnMspsWlanClientSecurityRowStatus | read-write | current | This is a control variable. It controls the instantiation of a conceptual row in snMspsWlanClientSecurityTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.13 | TablesnMspsWlanClientSecurityWEPKeyTable | not-accessible | current | This table is only available in Client mode. Conceptual table for WEP default keys. This table contains the four WEP default secret key values corresponding to… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.13.1 | RowsnMspsWlanClientSecurityWEPKeyEntry | not-accessible | current | An entry in the snMspsWlanClientSecurityWEPKeyTable, representing the conceptual row with security WEPKey related attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.13.1.1 | ColumnsnMspsWlanClientSecurityWEPKeyIndex | not-accessible | current | The auxiliary variable used to identify instances of the columnar objects in the snMspsWlanClientSecurityWEPKeyTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.13.1.5 | ColumnsnMspsWlanClientSecurityWEPKeyValue | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. A WEP default secre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.6.13.1.10 | ColumnsnMspsWlanClientSecurityWEPKeyAESCapable | read-only | current | This is a status variable. It is written by the SME when the corresponding instance's value in the keys table changes. When the attribute is true, then the val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7 | TablesnMspsWlanVapConfigTable | not-accessible | current | This table represents attributes that control the operation of a single service set. A conceptual row will be created for those ifIndex values that represent a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7.1 | RowsnMspsWlanVapConfigEntry | not-accessible | current | An entry in the snMspsWlanVapConfigTable, representing a service set's operational attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7.1.1 | ColumnsnMspsWlanVapConfigBroadcastSsid | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7.1.2 | ColumnsnMspsWlanVapConfigWdsId | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7.1.3 | ColumnsnMspsWlanVapConfigWdsOnly | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7.1.10 | ColumnsnMspsWlanVapConfigClientLimiter | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7.1.11 | ColumnsnMspsWlanVapConfigMaxClients | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.7.1.15 | ColumnsnMspsWlanVapConfigNextApChannelList | read-write | current | This is a control variable. It is written by the local management entity. Specifies the list of channel numbers which will be given to connected clients. The c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8 | IdentitysnMspsWlanWds | current | The objects in this group define attributes that control the behaviour of the Wireless Distribution System (WDS) the station participates in. A WDS consists of… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.1 | TablesnMspsWlanWdsConfigTable | not-accessible | current | This table represents attributes that control the operation of a single wireless distribution system endpoint. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.1.1 | RowsnMspsWlanWdsConfigEntry | not-accessible | current | An entry in the snMspsWlanWdsConfigTable, representing a WDS endpoint's configuration attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.1.1.1 | ColumnsnMspsWlanWdsConfigConnectionOverVap | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.1.1.2 | ColumnsnMspsWlanWdsConfigPartnerIdType | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object selects … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.1.1.3 | ColumnsnMspsWlanWdsConfigPartnerMacAddress | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.1.1.4 | ColumnsnMspsWlanWdsConfigPartnerWdsId | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2 | TablesnMspsWlanWdsTable | not-accessible | current | This table represents attributes that allow for the diagnosis of the actual connections between the WDS endpoints. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1 | RowsnMspsWlanWdsEntry | not-accessible | current | An entry in the snMspsWlanWdsTable, representing a single WDS connection's current operational parameters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.1 | ColumnsnMspsWlanWdsPartnerMacAddress | read-only | current | This is a status variable. It is written by the SME when a WDS connection is established. The object represents the MAC address of a WDS partner. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.2 | ColumnsnMspsWlanWdsPartnerWdsId | read-only | current | This is a status variable. It is written by the SME when a WDS connection is established. The object represents the WDS-ID of a partner if any is transmitted i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.3 | ColumnsnMspsWlanWdsChannelNumber | read-only | current | This is a status variable. It is written by the SME when a WDS connection is established. The object represents the channel on which the WDS connection was est… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.4 | ColumnsnMspsWlanWdsSignalStrength | read-only | current | This is a status variable. It is written by the MAC when a frame from a WDS connection partner is received. The object represents the received signal strength … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.5 | ColumnsnMspsWlanWdsSignalPercentage | read-only | current | This is a status variable. It is written by the MAC when a frame from a WDS connection partner is received. The object represents the received signal strength … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.6 | ColumnsnMspsWlanWdsConnectionState | read-only | current | This is a status variable. It is written by the SME when a WDS connection is established. The object represents the status of the WDS connection. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.8 | ColumnsnMspsWlanWdsDataRate | read-only | current | This is a status variable. It is written by the SME when a WDS partner connects to the AP. The object represents the data rate of the WDS partner in bits per s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.8.2.1.9 | ColumnsnMspsWlanWdsIREFAntennaConnector | read-only | current | This is a status variable. It is written by the SME when a WDS partner connects to the AP. If iREF feature is enabled, this object represents the antenna socke… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9 | IdentitysnMspsWlanOverlapAp | current | The objects in this group define attributes that facilitate detection of spatial and operational collisions with other access points pperating on the same freq… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.1 | TablesnMspsWlanOverlapApConfigTable | not-accessible | current | This table represents attributes that control the operation of the diagnostic service of a single station. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.1.1 | RowsnMspsWlanOverlapApConfigEntry | not-accessible | current | An entry in the snMspsWlanOverlapApConfigTable, representing the configuration of a station's diagnostic service for the detection of overlapping access points. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.1.1.1 | ColumnsnMspsWlanStationOverlapApConfigAging | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2 | TablesnMspsWlanOverlapApTable | not-accessible | current | This table represents attributes that allow for the diagnosis of the overlapping access points. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1 | RowsnMspsWlanOverlapApEntry | not-accessible | current | An entry in the snMspsWlanOverlapApTable, representing a single over- lapping access point's operational characteristics. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.1 | ColumnsnMspsWlanOverlapApMac | not-accessible | current | This is an index variable. This object represents the MAC address of an overlapping AP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.2 | ColumnsnMspsWlanOverlapApSysname | read-only | current | This is a status variable. It is written by the SME when an overlapping AP is detected. The object represents the value of the sysName if any is transmitted in… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.3 | ColumnsnMspsWlanOverlapApChannelNumber | read-only | current | This is a status variable. It is written by the SME when an overlapping AP is detected. The object represents the channel on which the overlapping AP's beacon … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.4 | ColumnsnMspsWlanOverlapApSignalStrength | read-only | current | This is a status variable. It is written by the MAC when a beacon frame from an overlapping AP is received. The object represents the received signal strength … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.5 | ColumnsnMspsWlanOverlapApSignalPercentage | read-only | current | This is a status variable. It is written by the MAC when a beacon frame from an overlapping AP is received. The object represents the received signal strength … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.6 | ColumnsnMspsWlanOverlapApAgingInterval | read-only | current | This is a status variable. It is written by the MAC when a beacon frame from an overlapping AP is received. The object represents the amount of time passed sin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.7 | ColumnsnMspsWlanOverlapApSsid | read-only | current | This is a status variable. It is written by the SME when an overlapping AP is detected. The object represents the value of the SSID if any is transmitted in th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.8 | ColumnsnMspsWlanOverlapApSecurityLevel | read-only | current | This is a status variable. It is written by the SME when an overlapping AP is detected. The object represents the security level employed by the overlapping AP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.9 | ColumnsnMspsWlanOverlapApType | read-only | current | This is a status variable. It is written by the SME when an overlapping AP is detected. The object represents the type of the overlapping AP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.9.2.1.12 | ColumnsnMspsWlanOverlapApMode | read-only | current | This is a status variable. It is written by the SME when an overlapping AP is detected. The object represents the current WLAN mode of the overlapping AP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10 | TablesnMspsWlanClientTable | not-accessible | current | This table represents attributes that allow for the diagnosis of the clients associated to an access point. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1 | RowsnMspsWlanClientEntry | not-accessible | current | An entry in the snMspsWlanClientTable, representing a single client's current operational parameters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.1 | ColumnsnMspsWlanClientMacAddress | not-accessible | current | This is an index variable. This object represents the MAC address of a non-AP-station. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.2 | ColumnsnMspsWlanClientSysname | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. The object represents the value of the sysName if any is transmitted in … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.3 | ColumnsnMspsWlanClientChannelNumber | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. The object represents the channel on which the station's MLME request wa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.4 | ColumnsnMspsWlanClientSignalStrength | read-only | current | This is a status variable. It is written by the MAC when an AP receives a frame from a station. The object represents the received signal strength in dBm. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.5 | ColumnsnMspsWlanClientSignalPercentage | read-only | current | This is a status variable. It is written by the MAC when an AP receives a frame from a station. The object represents the received signal strength in percentil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.6 | ColumnsnMspsWlanClientAge | read-only | current | This is a status variable. It is written by the MAC when an AP receives a frame from a station. The object represents the amount of time passed since the last … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.7 | ColumnsnMspsWlanClientConnectionState | read-only | current | This is a status variable. It is written by the MAC when an AP receives a frame from a station. The object represents the status of the connection with a stati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.8 | ColumnsnMspsWlanClientType | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. The object represents the type of the non-AP-station. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.10 | ColumnsnMspsWlanClientAID | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. The object represents the association identifier of the non-AP-station. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.12 | ColumnsnMspsWlanClientPhyOperationMode | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. The object represents the PHY operation mode of the non-AP-station. Depe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.13 | ColumnsnMspsWlanClientDataRate | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. The object represents the data rate of the non-AP-station in bits per se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.15 | ColumnsnMspsWlanClientIREFAntennaConnector | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. If iREF feature is enabled, this object represents the antenna socket, w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.10.1.20 | ColumnsnMspsWlanClientSecurityLevel | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. The object represents the security level of the non-AP-station. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11 | TablesnMspsWlanAvailableApTable | not-accessible | current | This table represents attributes that allow for the diagnosis of the APs available to a client station. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1 | RowsnMspsWlanAvailableApEntry | not-accessible | current | An entry in the snMspsWlanAvailableApTable, representing a single AP's current operational parameters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.1 | ColumnsnMspsWlanAvailableApMacAddress | not-accessible | current | This is an index variable. This object represents the MAC address of an AP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.2 | ColumnsnMspsWlanAvailableApSysname | read-only | current | This is a status variable. It is written by the SME when an AP is detected. The object represents the value of the sysName if any is transmitted in the beacon … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.3 | ColumnsnMspsWlanAvailableApChannelNumber | read-only | current | This is a status variable. It is written by the SME when an AP is detected. The object represents the channel on which the AP's beacon frame was received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.4 | ColumnsnMspsWlanAvailableApSignalStrength | read-only | current | This is a status variable. It is written by the MAC when a station receives a frame from the AP. The object represents the received signal strength in dBm. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.5 | ColumnsnMspsWlanAvailableApSignalPercentage | read-only | current | This is a status variable. It is written by the MAC when a station receives a frame from the AP. The object represents the received signal strength in percenti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.6 | ColumnsnMspsWlanAvailableApSsid | read-only | current | This is a status variable. It is written by the SME when an AP is detected. The object represents the value of the SSID if any is transmitted in the beacon fra… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.7 | ColumnsnMspsWlanAvailableApSecurityLevel | read-only | current | This is a status variable. It is written by the SME when an AP is detected. The object represents the security level employed by the AP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.8 | ColumnsnMspsWlanAvailableApConnectionState | read-only | current | This is a status variable. It is written by the MAC when a station receives a frame from an AP. The object represents the status of the connection with an AP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.9 | ColumnsnMspsWlanAvailableApFortyMHzOperationAnnounced | read-only | current | This is a diagnostic variable. The object indicates whether the station's beacon announce that 40 MHz operation is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.10 | ColumnsnMspsWlanAvailableApHTChannelWidthDirection | read-only | current | This is a diagnostic variable. The object indicates whether the base channel is extended to 40 MHz with either the upper or the lower adjacent channel. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.13 | ColumnsnMspsWlanAvailableApMode | read-only | current | This is a diagnostic variable. The object indicates current WLAN mode employed by the AP |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.15 | ColumnsnMspsWlanAvailableApType | read-only | current | This is a diagnostic variable. The object indicates AP type |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.17 | ColumnsnMspsWlanAvailableApDataRate | read-only | current | This is a diagnostic variable. The object indicates data rate in bits per second employed by the AP Before evaluation of data rate 0 is returned. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.18 | ColumnsnMspsWlanAvailableApRxAntennaSignalStrengthList | read-only | current | This is a diagnostic variable. The object indicates list of received signal strength on corresponding antenna connector. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.20 | ColumnsnMspsWlanAvailableApSecurityContext | read-only | current | This is a diagnostic variable. If the connection to an AP is established, the object indicates security context ID, which settings are currently used . In AP m… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.25 | ColumnsnMspsWlanAvailableApDTAS | read-only | current | This is a diagnostic variable. The object indicates the result of evaluation of antenna connector with the best transmit performance to corresponding AP (evalu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.11.1.30 | ColumnsnMspsWlanAvailableApFastTransition | read-only | current | This is a diagnostic variable. The object indicates whether the corresponding AP supports Fast BSS Transition according to IEEE 802.11r standard. 0 - Fast BSS … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.15 | TablesnMspsWlanIpMappingTable | not-accessible | current | The table with the assignment of MAC address and IP address for sending incoming IP frames to the correct MAC address. This table is only available in Client m… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.15.1 | RowsnMspsWlanIpMappingEntry | not-accessible | current | An entry in the snMspsWlanIpMappingTable, representing mapping IP address to MAC address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.15.1.1 | ColumnsnMspsWlanIpMappingIpAddress | not-accessible | current | This is an index variable. This object represents the source IP address in the mapping entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.15.1.3 | ColumnsnMspsWlanIpMappingMacAddress | read-only | current | This object represents the destination MAC address in the mapping entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.17 | TablesnMspsWlanVapInformationTable | not-accessible | current | This table represents attributes that allow for the diagnosis of the actual connections on VAP interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.17.1 | RowsnMspsWlanVapInformationEntry | not-accessible | current | An entry in the snMspsWlanVapInformationTable, representing a single VAP connection's current operational parameters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.17.1.1 | ColumnsnMspsWlanVapInformationConnectedClients | read-only | current | This is a status variable. It is written by the SME. When the attribute snMspsWlanVapCommunicationClientLimiter is true, the value of this object represents cu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20 | IdentitysnMspsWlanForceRoamingOnIpDown | current | The objects in this group define attributes that relate to the feature 'Force Roaming on IP down' (FROID) | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10 | TablesnMspsWlanFROIDConfigTable | not-accessible | current | This feature is only available in AP mode. The MIB table configures list of server addresses and defines criteria for detecting their non-availability. If the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1 | RowsnMspsWlanFROIDConfigEntry | not-accessible | current | An entry in the snMspsWlanFROIDConfigTable, representing assignment of the feature configuration to corresponding VAP interfaces. An entry (conceptual row) wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.1 | ColumnsnMspsWlanFROIDConfigServerIndex | not-accessible | current | This is an auxiliary index variable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.4 | ColumnsnMspsWlanFROIDConfigAddressType | read-create | current | This is a control variable. It is written by the local management entity. Destination Address Type of corresponding entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.5 | ColumnsnMspsWlanFROIDConfigServerAddress | read-create | current | This is a control variable. It is written by the local management entity. Network Address of corresponding entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.10 | ColumnsnMspsWlanFROIDConfigServerCheckInterval | read-create | current | This is a control variable. It is written by the local management entity. Specifies time interval between connection tries to corresponding server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.13 | ColumnsnMspsWlanFROIDConfigServerMaxLostPackets | read-create | current | This is a control variable. It is written by the local management entity. Specifies the max. number of network packets, which may get lost before the correspon… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.16 | ColumnsnMspsWlanFROIDConfigServerPortList | read-create | current | This is a control variable. It is written by the local management entity. Specifies the assignment of VAP ports to corresponding server entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.45 | ColumnsnMspsWlanFROIDConfigServerAvailability | read-only | current | This is a status variable. It indicates availability of corresponding server, evaluated from last connection attempt. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.10.1.50 | ColumnsnMspsWlanFROIDConfigServerRowStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.20 | TablesnMspsWlanFROIDInfoTable | not-accessible | current | This feature is only available in AP mode. The MIB table shows the state of feature 'Force roaming on IP down' on corresponding VAP interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.20.1 | RowsnMspsWlanFROIDInfoEntry | not-accessible | current | An entry in the snMspsWlanFROIDInfoTable referenced by VAP ifIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.20.20.1.10 | ColumnsnMspsWlanFROIDInfoStatus | read-only | current | This is a status variable. Represents current state of 'Force Roaming on IP down' on corresponding VAP interface: 1 - 'Force Roaming on IP down' is active on c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23 | IdentitysnMspsWlanRoamingProfile | current | The objects in this group define attributes that relate to the wireless-specific Roaming Profile configuration | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10 | TablesnMspsWlanRoamingProfileTable | not-accessible | current | This feature is only available in Client mode and only on supported devices. The MIB table configures list of settings for roaming profiles in a non-AP station. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1 | RowsnMspsWlanRoamingProfileEntry | not-accessible | current | An entry in the snMspsWlanRoamingProfileTable, representing feature configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1.1 | ColumnsnMspsWlanRoamingProfileIndex | not-accessible | current | This is an auxiliary index variable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1.2 | ColumnsnMspsWlanRoamingProfileType | read-write | current | This is a control variable. It is written by the local management entity (is allowed in current implementation). Each parameter will set corresponding paramete… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1.6 | ColumnsnMspsWlanRoamingProfileThreshold | read-write | current | This is a control variable. It is written by the local management entity Specifies threshold in dB of the new AP's signal strength for roaming. This setting ta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1.8 | ColumnsnMspsWlanRoamingProfileBeaconMissThreshold | read-write | current | This is a control variable. It is written by the local management entity Specifies number of beacons loss, before roaming. This value also depends on current v… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1.10 | ColumnsnMspsWlanRoamingProfilePacketLossThreshold | read-write | current | This is a control variable. It is written by the local management entity Specifies number of packet loss (without acknowledgement), before roaming. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1.12 | ColumnsnMspsWlanRoamingProfileSignalThreshold | read-write | current | This is a control variable. It is written by the local management entity Client disconnects from access point when the receive signal falls below the configure… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.23.10.1.50 | ColumnsnMspsWlanRoamingProfileRowStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row. The number of max. allowed entries depends on feature availability in correspond… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.30 | IdentitysnMspsWlanIpv6 | current | The objects in this group define attributes that relate to the wireless-specific IPv6 configuration | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.1.30.5 | ScalarsnMspsWlanIpv6TransparentMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When set to true(1)… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2 | IdentitysnMspsWlanMac | current | The objects in this group define attributes that relate to the MAC service. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.1 | TablesnMspsWlanOperationTable | not-accessible | current | This table represents attributes that control the operation of a radio interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.1.1 | RowsnMspsWlanOperationEntry | not-accessible | current | An entry in the snMspsWlanOperationTable, representing a radio's configuration attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.1.1.2 | ColumnsnMspsWlanOperationHwRetries | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.3 | TablesnMspsWlanMacAddrConfigTable | not-accessible | current | This table represents attributes that control the MAC address configuration of a radio interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.3.1 | RowsnMspsWlanMacAddrConfigEntry | not-accessible | current | An entry in the snMspsWlanMacAddrConfigTable, representing a radio's configuration attributes with respect to the MAC address used. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.3.1.1 | ColumnsnMspsWlanMacAddrConfigMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.3.1.2 | ColumnsnMspsWlanMacAddrConfigAddress | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.2.3.1.3 | ColumnsnMspsWlanMacAddrCurrentAddress | read-only | current | This is a control variable. It is written by the SME whenever the radio interface changes the MAC address. The object represents the MAC address currently in u… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4 | IdentitysnMspsWlanPhy | current | The objects in this group define attributes that relate to the PHY service. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1 | TablesnMspsWlanPhyOperationTable | not-accessible | current | This table represents attributes that control the operation of a radio interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1 | RowsnMspsWlanPhyOperationEntry | not-accessible | current | An entry in the snMspsWlanPhyOperationTable, representing a radio's physical configuration attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.1 | ColumnsnMspsWlanPhyOperationFrequencyBand | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.2 | ColumnsnMspsWlanPhyOperationMode2GHz | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.3 | ColumnsnMspsWlanPhyOperationMode5GHz | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.6 | ColumnsnMspsWlanPhyOperationShortPreamble | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.7 | ColumnsnMspsWlanPhyOperationOutdoor | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.8 | ColumnsnMspsWlanPhyOperationCurrentTxPower | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.9 | ColumnsnMspsWlanPhyOperationChannel | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.10 | ColumnsnMspsWlanPhyOperationAlternativeChannel | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.1.1.11 | ColumnsnMspsWlanPhyOperationAllowedChannelSelect | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2 | IdentitysnMspsWlanPhyAntennaConfiguration | current | The objects in this group define attributes that indicate the actual antenna configuration. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1 | TablesnMspsWlanPhyAntennaTypeTable | not-accessible | current | This table represents the antenna configuration physically attached to a device. It is used to verify whether the EIRP limits imposed by a regulatory domain ar… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1 | RowsnMspsWlanPhyAntennaTypeEntry | not-accessible | current | An entry in the snMspsWlanPhyAntennaTypeTable, representing the physical antenna configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.1 | ColumnsnMspsWlanPhyAntennaTypeIndex | not-accessible | current | This auxiliary variable represents an unique index which is used to identify instances of the columnar objects in the snMspsWlanPhyAntennaTypeTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.2 | ColumnsnMspsWlanPhyAntennaTypeConnectorName | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object contains the name of the antenna connector. If the device has e… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.3 | ColumnsnMspsWlanPhyAntennaTypeCurrentState | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object reflects… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.4 | ColumnsnMspsWlanPhyAntennaTypeCurrentIndex | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object contains… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.5 | ColumnsnMspsWlanPhyAntennaTypeCableLength | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.6 | ColumnsnMspsWlanPhyAntennaTypeAttenuation | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.7 | ColumnsnMspsWlanPhyAntennaTypeGain2GHz | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object reflects… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.8 | ColumnsnMspsWlanPhyAntennaTypeGain5GHz | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object reflects… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.9 | ColumnsnMspsWlanPhyAntennaTypeOperationMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object reflects… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.15 | ColumnsnMspsWlanPhyAntennaChannelNoiseFloor | read-only | current | This is a status variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The returned value r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.1.1.16 | ColumnsnMspsWlanPhyAntennaExtChannelNoiseFloor | read-only | current | This is a status variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The returned value r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2 | TablesnMspsWlanPhyAntennasRangeTable | not-accessible | current | This table represents the range of antennas preconfigured for use with a device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1 | RowsnMspsWlanPhyAntennasRangeEntry | not-accessible | current | An entry in the snMspsWlanPhyAntennasRangeTable, representing the characteristic properties of an antenna. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.1 | ColumnsnMspsWlanPhyAntennasRangeIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsWlanPhyAntennasRangeTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.2 | ColumnsnMspsWlanPhyAntennasRangeName | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object contains the product name of an antenna. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.3 | ColumnsnMspsWlanPhyAntennasRangeOrderNumber | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object contains the type identifier or order number of an antenna. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.4 | ColumnsnMspsWlanPhyAntennasRangeMaxGain2GHz | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object indicates the maximum antenna gain in the 2.4 GHz frequency band… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.5 | ColumnsnMspsWlanPhyAntennasRangeGain2GHzTableSize | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object reflects the number of corresponding conceptual rows in the snMs… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.6 | ColumnsnMspsWlanPhyAntennasRangeMaxGain5GHz | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object indicates the maximum antenna gain in the 5 GHz frequency band t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.7 | ColumnsnMspsWlanPhyAntennasRangeGain5GHzTableSize | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object reflects the number of corresponding conceptual rows in the snMs… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.2.1.10 | ColumnsnMspsWlanPhyAntennasRangeCharacteristic | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object reflects the characteristic of corresponding antenna. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.3 | TablesnMspsWlanPhyAntennaGain2GhzTable | not-accessible | current | This table represents the variation of the gain value as a function of frequency in the 2.4 GHz band. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.3.1 | RowsnMspsWlanPhyAntennaGain2GhzEntry | not-accessible | current | An entry in the snMspsWlanPhyAntennaGain2GhzTable, representing the gain properties of an antenna depending on the frequency. snMspsWlanPhyAntennasRangeIndex -… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.3.1.1 | ColumnsnMspsWlanPhyAntennaGain2GhzIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsWlanPhyAntennasRangeTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.3.1.2 | ColumnsnMspsWlanPhyAntennaGain2GhzLowerFrequency | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents a channel frequency in MHz that marks the lower end … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.3.1.3 | ColumnsnMspsWlanPhyAntennaGain2GhzUpperFrequency | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents a channel frequency in MHz that marks the upper end … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.3.1.4 | ColumnsnMspsWlanPhyAntennaGain2GhzValue | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents the antenna gain in dBi that is typical for an anten… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.4 | TablesnMspsWlanPhyAntennaGain5GhzTable | not-accessible | current | This table represents the variation of the gain value as a function of frequency in the 5 GHz band. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.4.1 | RowsnMspsWlanPhyAntennaGain5GhzEntry | not-accessible | current | An entry in the snMspsWlanPhyAntennaGain5GhzTable, representing the gain properties of an antenna depending on the frequency. snMspsWlanPhyAntennasRangeIndex -… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.4.1.1 | ColumnsnMspsWlanPhyAntennaGain5GhzIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsWlanPhyAntennasRangeTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.4.1.2 | ColumnsnMspsWlanPhyAntennaGain5GhzLowerFrequency | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents a channel frequency in MHz that marks the lower end … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.4.1.3 | ColumnsnMspsWlanPhyAntennaGain5GhzUpperFrequency | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents a channel frequency in MHz that marks the upper end … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.2.4.1.4 | ColumnsnMspsWlanPhyAntennaGain5GhzValue | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents the antenna gain in dBi that is characteristic for a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3 | IdentitysnMspsWlanPhyDiagnostics | current | The objects in this group define attributes that are relevant to PHY level diagnostics. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1 | TablesnMspsWlanBssDiagTable | not-accessible | current | This table represents attributes that allow for the diagnosis of a Basic Service Set (BSS) the station is part of. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1 | RowsnMspsWlanBssDiagEntry | not-accessible | current | An entry in the snMspsWlanBssDiagTable, representing the characteristics of a single Basic Service Set. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1.1 | ColumnsnMspsWlanCurrentFrequency | read-only | current | This is a status variable. It is written by the SME when WLAN operation is started. The object represents the frequency the radio interface currently uses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1.2 | ColumnsnMspsWlanCurrentChannelNumber | read-only | current | This is a status variable. It is written by the SME when WLAN operation is started. The object represents the channel number the radio interface currently uses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1.3 | ColumnsnMspsWlanCurrentConnectionsCta | read-only | current | This is a status variable. It is written by the SME when WLAN operation is started. The object represents the total number of active wireless connections. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1.4 | ColumnsnMspsWlanCurrentConnectionMacAddress | read-only | current | This is a status variable. It is written by the SME when WLAN operation is started. From client point of view, this object represents the MAC address of connec… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1.6 | ColumnsnMspsWlanCurrentMaxDataRate | read-only | current | This is a status variable. It is written by the SME when WLAN operation is started. The object represents the max data rate of active wireless connection. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1.7 | ColumnsnMspsWlanCurrentDataRate | read-only | current | This is a status variable. It is written by the SME when WLAN operation is started. The object represents the current data rate in bits per second of active wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.3.1.1.10 | ColumnsnMspsWlanCurrentHtChWidth | read-only | current | This is a status variable. It is written by the SME when WLAN operation is started. The object represents the current channel width on active wireless connecti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7 | IdentitysnMspsWlanDataRates | current | The objects in this group define attributes that control data rate settings. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.5 | TablesnMspsWlanDataRatesSelectTable | not-accessible | current | This table specifies whether a WLAN interface shall employ a custom data rate parameterization. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.5.1 | RowsnMspsWlanDataRatesSelectEntry | not-accessible | current | An entry in the snMspsWlanDataRatesSelectTable, representing the administrative parameterization with respect to custom data rates per WLAN radio interface. A … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.5.1.1 | ColumnsnMspsWlanDataRates11abgSelect | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.5.1.2 | ColumnsnMspsWlanDataRates11nSelect | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.5.1.5 | ColumnsnMspsWlanDataRates11axSelect | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.5.1.6 | ColumnsnMspsWlanDataRates11axSingleStreamRatesOnly | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.10 | TablesnMspsWlanDataRates11abgDomainTable | not-accessible | current | This table represents the data rates a device is capable of employing in the IEEE 802.11a/b/g mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.10.1 | RowsnMspsWlanDataRates11abgDomainEntry | not-accessible | current | An entry in the snMspsWlanDataRates11abgDomainTable, representing a single data rate. snMspsWlanDataRates11abgIndex - The entries are identified by a value cor… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.10.1.2 | ColumnsnMspsWlanDataRates11abgIndex | not-accessible | current | This is an index variable. It is written by the SME when the device is initialized. The object represents a data rate in a unit of 0.5 Mega bits per second tha… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.10.1.4 | ColumnsnMspsWlanDataRates11abgModulationType | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object represents a modulation type associated with a data rate. As suc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.10.1.8 | ColumnsnMspsWlanDataRates11abgDataRate | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object represents a data rate in a human readable textual format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.20 | TablesnMspsWlanDataRates11abgConfigTable | not-accessible | current | This table represents the data rates which shall be employed by a WLAN radio interface in IEEE 802.11a/b/g mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.20.1 | RowsnMspsWlanDataRates11abgConfigEntry | not-accessible | current | An entry in the snMspsWlanDataRates11abgConfigTable, representing the administrative parameterization with respect to data rates per WLAN radio interface. An e… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.20.1.5 | ColumnsnMspsWlanDataRates11abgDataRateEnabled | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.20.1.10 | ColumnsnMspsWlanDataRates11abgDataRateBasic | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.30 | TablesnMspsWlanDataRates11nDomainTable | not-accessible | current | This table represents the data rates a device is capable of employing in IEEE 802.11n (HT) mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.30.1 | RowsnMspsWlanDataRates11nDomainEntry | not-accessible | current | An entry in the snMspsWlanDataRates11nDomainTable, representing a single mapping of a data rate to a MCS index, Guard Interval and Channel Width tuple. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.30.1.1 | ColumnsnMspsWlanMcsIndex | not-accessible | current | This is an index variable. Its value is determined by device capabilities. The object represents a reference to a Modulation and Coding Scheme (MCS). The objec… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.30.1.2 | ColumnsnMspsWlanGuardIntervalIndex | not-accessible | current | This is an index variable. Its value is determined by device capabilities. The object's value represents the duration of the Guard Interval. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.30.1.3 | ColumnsnMspsWlanHtChWidthIndex | not-accessible | current | This is an index variable. Its value is determined by device capabilities. The object's value represents the High Throughput channel width. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.30.1.7 | ColumnsnMspsWlanDataRates11nSupportedStreams | read-only | current | This is a capability variable. Its value is determined by device capabilities. The object's value represents the number of supported spatial streams. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.30.1.9 | ColumnsnMspsWlanDataRates11nDataRate | read-only | current | This is a status variable. It is written by the SME when the device is initialized. The object represents a data rate in a human readable textual format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.40 | TablesnMspsWlanDataRates11nConfigTable | not-accessible | current | This table represents the data rates which shall be employed by a WLAN radio interface in IEEE 802.11n mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.40.1 | RowsnMspsWlanDataRates11nConfigEntry | not-accessible | current | An entry in the snMspsWlanDataRates11nConfigTable, representing the administrative parameterization with respect to data rates per WLAN interface. An entry (co… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.40.1.5 | ColumnsnMspsWlanDataRates11nDataRateEnabled | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.50 | TablesnMspsWlanDataRates11axConfigTable | not-accessible | current | This table represents the data rates which shall be employed by a WLAN radio interface in IEEE 802.11ax mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.50.1 | RowsnMspsWlanDataRates11axConfigEntry | not-accessible | current | An entry in the snMspsWlanDataRates11axConfigTable, representing the administrative parameterization with respect to data rates per WLAN interface. An entry (c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.4.7.50.1.5 | ColumnsnMspsWlanDataRates11axDataRateEnabled | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. When the attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5 | IdentitysnMspsWlanSys | current | The objects in this group define attributes that control all parameters with a device-wide scope, as opposed to parameters with limited scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.1 | ScalarsnMspsWlanSystemCommitMode | read-write | current | This is a control variable. It is written by an external management entity. The object specifies whether configuration changes shalle be committed to the SME a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.2 | ScalarsnMspsWlanSystemCommitSettings | read-write | current | This is a control variable. It is written by an external management entity. The object enables a management entity to explicitly control if and when changes to… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.3 | ScalarsnMspsWlanSystemCountryCode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.9 | ScalarsnMspsWlanSystemFrequencyBandConfigurationMode | read-write | current | This is a control variable. It is written by the SME. The object is only implemented on devices with fixed frequency band on WLAN interface and represents curr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.10 | ScalarsnMspsWlanSystemDeviceMode | read-only | current | This is a status variable. It is written by the SME when at least one snMspsWlanRadioMode object changes. The object provides a convenient facade to the otherw… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.11 | ScalarsnMspsWlanSystemRadioModulesCount | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object counts the number of radio modules fitted into the device, rega… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12 | IdentitysnMspsWlanSystemRegulatoryApproval | current | This node contains objects that detail the regulatory domains and the regulatory approvals implemented by this device. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.1 | TablesnMspsWlanCountriesTable | not-accessible | current | This table represents the list of countries the device is granted requlatory approval for radio operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.1.1 | RowsnMspsWlanCountriesEntry | not-accessible | current | An entry in the snMspsWlanCountriesTable, representing a single regulatory domain, i.e. an entire country or a sub-domain or area of application therein. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.1.1.1 | ColumnsnMspsWlanCountryIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsWlanCountriesTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.1.1.2 | ColumnsnMspsWlanCountryISOName | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents an ISO 3166-1 conformant short country name. It may … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.1.1.3 | ColumnsnMspsWlanCountryISONumber | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents an ISO 3166-1 three-digit country number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.1.1.4 | ColumnsnMspsWlanCountryISOCode | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents an ISO 3166-1 alpha-2 country code tag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.1.1.5 | ColumnsnMspsWlanCountryDFSDomain | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object indicates whether dynamic frequency selection (DFS) is required… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2 | TablesnMspsWlanDomainTable | not-accessible | current | This table represents the list regulatory approvals met by the device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1 | RowsnMspsWlanDomainEntry | not-accessible | current | An entry in the snMspsWlanDomainTable, representing the properties of a single variant of a frequency in a country. snMspsWlanCountryIndex - The entries share … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.1 | ColumnsnMspsWlanDomainFrequency | not-accessible | current | This is an index object which is used to identify instances of the columnar objects in the snMspsWlanDomainTable. The object represents the channel frequency i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.2 | ColumnsnMspsWlanDomainVariantIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsWlanDomainTable. If a domain entry c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.3 | ColumnsnMspsWlanDomainChannelNumber | read-only | current | This is an auxiliary object. This object represents the channel frequency as a dimensionless (and possibly ambiguous) number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.4 | ColumnsnMspsWlanDomainMaxRadiatedPower | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents the maximum radiated power level (EIRP) in dBm that … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.5 | ColumnsnMspsWlanDomainMaxConductedPower | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents the maximum conducted power level at the antenna con… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.6 | ColumnsnMspsWlanDomainMaxAntennaGain | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents the maximum antenna gain in dBi that is conformant w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.7 | ColumnsnMspsWlanDomainDFSRequired | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object indicates whether dynamic frequency selection (DFS) is required… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.8 | ColumnsnMspsWlanDomainOutdoorAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that the channel represented by snMsps… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.10 | ColumnsnMspsWlanDomainCCKAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates whether a CCK modulation scheme is all… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.11 | ColumnsnMspsWlanDomainOFDMAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates whether a OFDM modulation scheme is al… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.12 | ColumnsnMspsWlanDomainHT20Allowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a MIMO OFDM modulation scheme is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.13 | ColumnsnMspsWlanDomainHT40PlusAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a HT20 channel may be extended wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.14 | ColumnsnMspsWlanDomainHT40MinusAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a HT20 channel may be extended wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.15 | ColumnsnMspsWlanDomainApprovalStatus | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The attribute indicates the channel's status of regulatory approval. 1 - R… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.20 | ColumnsnMspsWlanDomainVHT20Allowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a MIMO OFDM modulation scheme is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.21 | ColumnsnMspsWlanDomainVHT40PlusAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a VHT20 channel may be extended w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.22 | ColumnsnMspsWlanDomainVHT40MinusAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a HT20 channel may be extended wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.23 | ColumnsnMspsWlanDomainVHT80Allowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a MIMO OFDM modulation scheme is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.26 | ColumnsnMspsWlanDomainVHT160Allowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a MIMO OFDM modulation scheme is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.30 | ColumnsnMspsWlanDomainHE20Allowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a MIMO OFDM modulation scheme is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.33 | ColumnsnMspsWlanDomainHE40PlusAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a HE20 channel may be extended wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.35 | ColumnsnMspsWlanDomainHE40MinusAllowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a HE20 channel may be extended wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.2.1.37 | ColumnsnMspsWlanDomainHE80Allowed | read-only | current | This is a control variable. It is written by the SME when the device is initialized. When true, this attribute indicates that a MIMO OFDM modulation scheme is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.3 | TablesnMspsWlanAntennaApprovalTable | not-accessible | current | This table represents the list of antennas approved in a regulatory domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.3.1 | RowsnMspsWlanAntennaApprovalEntry | not-accessible | current | An entry in the snMspsWlanAntennaApprovalTable, representing the approval status of a single anntenna in a regulatory domain. snMspsWlanCountryIndex - The entr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.3.1.1 | ColumnsnMspsWlanAntennaDomainTableSize | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object reflects the number of corresponding conceptual rows in the snM… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.4 | TablesnMspsWlanAntennaDomainTable | not-accessible | current | This table represents the list of frequencies an antenna is approved for in a regulatory domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.4.1 | RowsnMspsWlanAntennaDomainEntry | not-accessible | current | An entry in the snMspsWlanAntennaDomainTable, representing the frequency bands an anntenna is approved for in a regulatory domain. snMspsWlanCountryIndex - The… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.4.1.1 | ColumnsnMspsWlanAntennaDomainIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsWlanAntennaDomainTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.4.1.2 | ColumnsnMspsWlanAntennaDomainLowerFrequency | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents a channel frequency in MHz that marks the lower end … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.12.4.1.3 | ColumnsnMspsWlanAntennaDomainUpperFrequency | read-only | current | This is a control variable. It is written by the SME when the device is initialized. The object represents a channel frequency in MHz that marks the upper end … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15 | IdentitysnMspsWlanSystemAuthLog | current | This node contains objects that detail the logging functionality implemented by this device. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.1 | ScalarsnMspsWlanAuthLogMaxEntries | read-only | current | Maximum number of authentication events that can be kept in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.2 | ScalarsnMspsWlanAuthLogCurrentEntries | read-only | current | Number of authentication events that are currently present in the log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.4 | ScalarsnMspsWlanAuthLogClear | read-write | current | Setting this object to start-clear(2) value, clears the authentication events that are kept in Non-Volatile Memory. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10 | TablesnMspsWlanAuthLogTable | not-accessible | current | The table contains the last authentication events that occurred in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1 | RowsnMspsWlanAuthLogEntry | not-accessible | current | The description of an authentication event that occurred in the system, and was stored in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1.1 | ColumnsnMspsWlanAuthLogEntryIdx | read-only | current | Log book ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1.2 | ColumnsnMspsWlanAuthLogEntryId | read-only | current | Log book internal ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1.3 | ColumnsnMspsWlanAuthLogRestart | read-only | current | Log book entrys restart number |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1.4 | ColumnsnMspsWlanAuthLogSysUpTime | read-only | current | System up time of entry in ASCII |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1.5 | ColumnsnMspsWlanAuthLogDescr | read-only | current | ASCII description of the event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1.6 | ColumnsnMspsWlanAuthLogSeverity | read-only | current | Severity level of the authentication log event |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.15.10.1.7 | ColumnsnMspsWlanAuthLogSysTime | read-only | current | System time information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20 | IdentitysnMspsWlanSystemStatistic | current | This node contains objects that represent WLAN statistic functionality implemented by this device. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.5 | ScalarsnMspsWlanStatisticClear | read-write | current | Setting this object to start-clear(2) value, clears the WLAN statisticts data that is kept in non-volatile memory. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10 | TablesnMspsWlanStatisticErrorsTable | not-accessible | current | The table contains the information about errors that occurred related to corresponding WLAN interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1 | RowsnMspsWlanStatisticErrorsEntry | not-accessible | current | The table contains the information about errors that occurred related to corresponding WLAN interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.5 | ColumnsnMspsWlanStatisticErrorsTxCount | read-only | current | This object represents the sum of the following counters: - Tx retry counter - Queue errors - Filtered frames - Frames with bad rates. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.6 | ColumnsnMspsWlanStatisticErrorsTxDroppedFrames | read-only | current | Number of frames that the interface was not able to send. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.7 | ColumnsnMspsWlanStatisticErrorsTxRetry | read-only | current | This counter will be incremented when the driver makes retries to send a frame. The counter will increment only if a retransmission is started, regardless of t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.12 | ColumnsnMspsWlanStatisticErrorsRxCount | read-only | current | Number of faulty received frames on WLAN interface (only incremented while AP-Client connection exists). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.13 | ColumnsnMspsWlanStatisticErrorsRxDuplicatedFrames | read-only | current | Number of data duplicated frames that have been received. The QOS is not considered in this counter |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.14 | ColumnsnMspsWlanStatisticErrorsRxDecryption | read-only | current | Number of frames that have decryption error |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.15 | ColumnsnMspsWlanStatisticErrorsRxFcs | read-only | current | Nounter of received frames that have a wrong CRC checksum. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.10.1.20 | ColumnsnMspsWlanStatisticErrorsRxCountTotal | read-only | current | Total number of all faulty received frames on WLAN interface (independent of AP-Client connection). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15 | TablesnMspsWlanStatisticTrafficTable | not-accessible | current | Traffic statistics are provided per VAP. Herewith this table contains data only in AP mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1 | RowsnMspsWlanStatisticTrafficEntry | not-accessible | current | Traffic statistics, provided per VAP interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.5 | ColumnsnMspsWlanStatisticTrafficRxAverageRate | read-only | current | Average rate of received data frames in kbps. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.8 | ColumnsnMspsWlanStatisticTrafficRxDataFrames | read-only | current | Number of data frames that the transceiver has successfully processed in its RX-part. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.11 | ColumnsnMspsWlanStatisticTrafficRxUnicast | read-only | current | Number of data frames that are received as unicast. It is the difference between data frame count and multicast/broadcast frames count. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.14 | ColumnsnMspsWlanStatisticTrafficRxMBCast | read-only | current | Number of broadcast and multicast of data frames that are successfully received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.17 | ColumnsnMspsWlanStatisticTrafficRxMgmtFrames | read-only | current | Number of received management frames. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.20 | ColumnsnMspsWlanStatisticTrafficAssocRequestRx | read-only | current | Number of received association requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.21 | ColumnsnMspsWlanStatisticTrafficAssocResponseRx | read-only | current | Number of received responses due to association requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.22 | ColumnsnMspsWlanStatisticTrafficDisassocRequestRx | read-only | current | Number of received disassociation requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.23 | ColumnsnMspsWlanStatisticTrafficDisassocResponseRx | read-only | current | Number of received responses due to disassociation requests |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.24 | ColumnsnMspsWlanStatisticTrafficAuthRequestRx | read-only | current | Number of received authentication requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.25 | ColumnsnMspsWlanStatisticTrafficAuthResponseRx | read-only | current | Number of received responses due to authentication requests |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.26 | ColumnsnMspsWlanStatisticTrafficDeauthRequestRx | read-only | current | Number of received deauthentication requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.27 | ColumnsnMspsWlanStatisticTrafficDeauthResponseRx | read-only | current | Number of received responses due to deauthentication requests |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.35 | ColumnsnMspsWlanStatisticTrafficTxAverageRate | read-only | current | Average rate of data frames in kbps. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.38 | ColumnsnMspsWlanStatisticTrafficTxDataFrames | read-only | current | Number of data frames that the transceiver has successfully processed in its TX-part. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.41 | ColumnsnMspsWlanStatisticTrafficTxUnicast | read-only | current | Number of data frames that are sent as unicast. It is the difference between data frame count and multicast/broadcast frames count. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.44 | ColumnsnMspsWlanStatisticTrafficTxMBCast | read-only | current | Number of broadcast and multicast of data frames that are successfully transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.47 | ColumnsnMspsWlanStatisticTrafficTxMgmtFrames | read-only | current | Number of sent management frames. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.50 | ColumnsnMspsWlanStatisticTrafficAssocRequestTx | read-only | current | Number of transmitted association requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.51 | ColumnsnMspsWlanStatisticTrafficAssocResponseTx | read-only | current | Number of transmitted responses due to association requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.52 | ColumnsnMspsWlanStatisticTrafficDisassocRequestTx | read-only | current | Number of transmitted disassociation requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.53 | ColumnsnMspsWlanStatisticTrafficDisassocResponseTx | read-only | current | Number of transmitted responses due to disassociation requests |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.54 | ColumnsnMspsWlanStatisticTrafficAuthRequestTx | read-only | current | Number of transmitted authentication requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.55 | ColumnsnMspsWlanStatisticTrafficAuthResponseTx | read-only | current | Number of transmitted responses due to authentication requests |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.56 | ColumnsnMspsWlanStatisticTrafficDeauthRequestTx | read-only | current | Number of transmitted deauthentication requests. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.20.15.1.57 | ColumnsnMspsWlanStatisticTrafficDeauthResponseTx | read-only | current | Number of transmitted responses due to deauthentication requests |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25 | IdentitysnMspsWlanSystemSignalRecorder | current | This node contains objects that detail the signal recorder functionality implemented by this device (Client only). | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25.15 | TablesnMspsWlanSystemSignalRecorderMgmtTable | not-accessible | current | This table represents settings for a signal recording operating mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25.15.1 | RowsnMspsWlanSystemSignalRecorderMgmtEntry | not-accessible | current | An entry in the snMspsWlanSystemSignalRecorderMgmtTable, representing the signal recorder configuration attributes for an iWLAN radio interface. An entry (conc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25.15.1.3 | ColumnsnMspsWlanSystemSignalRecorderTimeInterval | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25.15.1.6 | ColumnsnMspsWlanSystemSignalRecorderSampleNumber | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25.15.1.7 | ColumnsnMspsWlanSystemSignalRecorderSamplesRecorded | read-only | current | This is a status variable. The object represents the number of samples, which were written in the last session (or which are currently written in the running s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25.15.1.9 | ColumnsnMspsWlanSystemSignalRecorderBidirectional | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.25.15.1.10 | ColumnsnMspsWlanSystemSignalRecorderStatus | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.30 | IdentitysnMspsWlanSystemSpectrumAnalyzer | current | This node contains objects that detail the spectrum analyzer functionality implemented by this device (AP only). | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.30.10 | IdentitysnMspsWlanSystemSpectrumAnalyzerMgmt | current | This node contains configuration parameters of spectrum analyzer | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.30.10.15 | TablesnMspsWlanSystemSpectrumAnalyzerMgmtTable | not-accessible | current | This table represents settings for a spectrum analyzer operating mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.30.10.15.1 | RowsnMspsWlanSystemSpectrumAnalyzerMgmtEntry | not-accessible | current | An entry in the snMspsWlanSystemSpectrumAnalyzerMgmtTable, representing the spectrum analyzer configuration attributes for a WLAN radio interface. An entry (co… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.30.10.15.1.6 | ColumnsnMspsWlanSystemSpectrumAnalyzerCenterFrequency | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.5.30.10.15.1.100 | ColumnsnMspsWlanSystemSpectrumAnalyzerStatus | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10 | IdentitysnMspsWlanIFeatures | current | The objects in this group define attributes that control the settings of I-Features. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3 | IdentitysnMspsWlanIPCF | current | The objects in this group define attributes that control the settings of the Industrial Point Coordination Function (iPCF) for iWLAN. iPCF enables high data th… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1 | TablesnMspsWlanIPCFTable | not-accessible | current | This table represents settings for an iPCF operating mode that is optimized for use in RCoax installations. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1 | RowsnMspsWlanIPCFEntry | not-accessible | current | An entry in the snMspsWlanIPCFTable, representing the iPCF configuration attributes for an iWLAN radio interface. An entry (conceptual row) will be created for… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1.2 | ColumnsnMspsWlanIPCFEnable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1.3 | ColumnsnMspsWlanIPCFLegacyFree | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. If enabled, iPCF co… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1.6 | ColumnsnMspsWlanIPCFPnioSupport | read-write | deprecated | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1.7 | ColumnsnMspsWlanIPCFProtocolSupport | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1.8 | ColumnsnMspsWlanIPCFCycleTime | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1.10 | ColumnsnMspsWlanIPCFScanningMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.1.1.12 | ColumnsnMspsWlanIPCFSignalQualityThreshold | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.5 | TablesnMspsWlanIPCFCapableWEPDefaultKeysTable | not-accessible | current | This table augments the dot11WEPDefaultKeysTable. This table is not available in Client mode. Corresponding security configuration will be handled in snMspsWla… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.5.1 | RowsnMspsWlanIPCFCapableWEPDefaultKeysEntry | not-accessible | current | An entry in the snMspsWlanIPCFCapableWEPDefaultKeysTable, representing an augmentation of the conceptual row with iPCF related attributes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.5.1.1 | ColumnsnMspsWlanWEPDefaultKeyIPCFCapable | read-only | current | This is a status variable. It is written by the SME when the corresponding instance's value in the keys table changes. When the attribute is true, then the val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20 | IdentitysnMspsWlanIPCFDebugStatistic | current | The objects in this group define attributes that represents debug statistic functionality of the Industrial Point Coordination Function (iPCF) for iWLAN. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3 | IdentitysnMspsWlanIPCFDebugStatisticAP | current | The objects in this group define attributes that represents debug statistic functionality of the Industrial Point Coordination Function (iPCF) for iWLAN relate… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.3 | TablesnMspsWlanIPCFDebugStatCycleTimeTable | not-accessible | current | This table represents statistic values of Cycle Time in iPCF operating mode, which could be evaluated for debug purposes. This is only available on APs. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.3.1 | RowsnMspsWlanIPCFDebugStatCycleTimeEntry | not-accessible | current | An entry in the snMspsWlanIPCFDebugStatCycleTimeTable, representing statistic values of Cycle Time on an iWLAN radio interface. An entry (conceptual row) will … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.3.1.3 | ColumnsnMspsWlanIPCFDebugStatCycleTimeLast | read-only | current | This is a status variable. The value represents the last measured time in microseconds, in which all connected clients were polled. This is only available on A… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.3.1.4 | ColumnsnMspsWlanIPCFDebugStatCycleTimeMin | read-only | current | This is a status variable. The value represents the minimum measured time in microseconds, in which all connected clients were polled. This is only available o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.3.1.5 | ColumnsnMspsWlanIPCFDebugStatCycleTimeMax | read-only | current | This is a status variable. The value represents the maximum measured time in microseconds, in which all connected clients were polled. This is only available o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.3.1.6 | ColumnsnMspsWlanIPCFDebugStatCycleTimeAverage | read-only | current | This is a status variable. The value represents the average of measured time in microseconds, in which all connected clients were polled. This is only availabl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.6 | TablesnMspsWlanIPCFDebugStatRoundTripTimeTable | not-accessible | current | This table represents statistic values of Round Trip Time in iPCF operating mode, which could be evaluated for debug purposes. This is only available on APs. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.6.1 | RowsnMspsWlanIPCFDebugStatRoundTripTimeEntry | not-accessible | current | An entry in the snMspsWlanIPCFDebugStatRoundTripTimeTable, representing statistic values of iPCF Round Trip Time on an iWLAN radio interface. An entry (concept… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.6.1.3 | ColumnsnMspsWlanIPCFDebugStatRoundTripTimeLast | read-only | current | This is a status variable. The value represents the last measured time of a poll requests to a client and received response in microseconds. This is only avail… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.6.1.4 | ColumnsnMspsWlanIPCFDebugStatRoundTripTimeMin | read-only | current | This is a status variable. The value represents the minimum of the measured time of a poll requests to a client and received response in microseconds. This is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.6.1.5 | ColumnsnMspsWlanIPCFDebugStatRoundTripTimeMax | read-only | current | This is a status variable. The value represents the maximum of the measured time of a poll requests to a client and received response in microseconds. This is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.3.6.1.6 | ColumnsnMspsWlanIPCFDebugStatRoundTripTimeAverage | read-only | current | This is a status variable. The value represents the average of the measured time of all poll requests to a client and received response in microseconds. This i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.6 | IdentitysnMspsWlanIPCFDebugStatisticClient | current | The objects in this group define attributes that represents debug statistic functionality of the Industrial Point Coordination Function (iPCF) for iWLAN relate… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.6.3 | TablesnMspsWlanIPCFDebugStatHandoverTimeTable | not-accessible | current | This table represents statistic values of Handover Time in iPCF operating mode, which could be evaluated for debug purposes. This is only available on Clients. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.6.3.1 | RowsnMspsWlanIPCFDebugStatHandoverTimeEntry | not-accessible | current | An entry in the snMspsWlanIPCFDebugStatHandoverTimeTable, representing statistic values of iPCF Client Handover Time on an iWLAN radio interface. An entry (con… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.6.3.1.3 | ColumnsnMspsWlanIPCFDebugStatHandoverTimeLast | read-only | current | This is a status variable. The object represents the last measured time of a handover in microseconds. This is only available on Clients. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.6.3.1.4 | ColumnsnMspsWlanIPCFDebugStatHandoverTimeMin | read-only | current | This is a status variable. The object represents the minimum of measured time of a handover in microseconds. This is only available on Clients. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.6.3.1.5 | ColumnsnMspsWlanIPCFDebugStatHandoverTimeMax | read-only | current | This is a status variable. The object represents the maximum of measured time of a handover in microseconds. This is only available on Clients. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.3.20.6.3.1.6 | ColumnsnMspsWlanIPCFDebugStatHandoverTimeAverage | read-only | current | This is a status variable. The object represents the average of measured time of all handovers in microseconds. This is only available on Clients. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4 | IdentitysnMspsWlanIPCFHT | current | The objects in this group define attributes that represents functionality of the industrial Point Coordination Function Version 2 (iPCF-HT) for iWLAN. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4.10 | TablesnMspsWlanIPCFHTTable | not-accessible | current | This table represents settings for an iPCF-HT operating mode that is optimized for use in RCoax installations. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4.10.1 | RowsnMspsWlanIPCFHTEntry | not-accessible | current | An entry in the snMspsWlanIPCFHTTable, representing the iPCF-HT configuration attributes for an iWLAN radio interface. An entry (conceptual row) will be create… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4.10.1.2 | ColumnsnMspsWlanIPCFHTEnable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4.10.1.5 | ColumnsnMspsWlanIPCFHTProtocolSupport | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4.10.1.8 | ColumnsnMspsWlanIPCFHTCycleTime | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4.10.1.11 | ColumnsnMspsWlanIPCFHTScanningMode | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.4.10.1.13 | ColumnsnMspsWlanIPCFHTSignalQualityThreshold | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5 | IdentitysnMspsWlanIPCFMC | current | The objects in this group define attributes that control the settings of the Industrial Point Coordination Function - Management Channel (iPCF-MC) for iWLAN. T… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.2 | ScalarsnMspsWlanIPCFMCEnable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.3 | ScalarsnMspsWlanIPCFMCLegacyFree | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. If enabled, iPCF-MC… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.5 | ScalarsnMspsWlanIPCFMCMgmtScanPeriod | read-write | current | This parameter specifies the time between two client scans of one management channel (specified in iPCF cycles). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.7 | ScalarsnMspsWlanIPCFMCCycleTime | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.8 | ScalarsnMspsWlanIPCFMCProtocolSupport | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.9 | ScalarsnMspsWlanIPCFMCDataInterface | read-only | current | This is a status variable. The value represents the ifIndex of corresponding radio interface, which is currently used for transferring useful data. Value 0 mea… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.12 | ScalarsnMspsWlanIPCFMCMgmtInterface | read-only | current | This is a status variable. The value represents the ifIndex of corresponding radio interface, which is currently used for sending beacons. Value 0 means that i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.5.20 | ScalarsnMspsWlanIPCFMCRoamingFilter | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. If not disabled (0)… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.7 | IdentitysnMspsWlanIPCF2 | current | The objects in this group define attributes that control the settings of the Industrial Point Coordination Function 2 (iPCF2) for iWLAN. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.7.1 | TablesnMspsWlanIPCF2Table | not-accessible | current | This table represents settings for an iPCF2 operating mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.7.1.1 | RowsnMspsWlanIPCF2Entry | not-accessible | current | An entry in the snMspsWlanIPCF2Table, representing the iPCF2 configuration attributes for an iWLAN radio interface. An entry (conceptual row) will be created f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.7.1.1.2 | ColumnsnMspsWlanIPCF2Enable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.10 | IdentitysnMspsWlanIREF | current | The objects in this group define attributes that control the settings of the industrial Range Extension Function (iREF) for iWLAN. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.10.1 | TablesnMspsWlanIREFTable | not-accessible | current | This table represents settings for an iREF operating mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.10.1.1 | RowsnMspsWlanIREFEntry | not-accessible | current | An entry in the snMspsWlanIREFTable, representing the iREF configuration attributes for an iWLAN radio interface. An entry (conceptual row) will be created for… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.10.1.1.2 | ColumnsnMspsWlanIREFEnable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13 | IdentitysnMspsWlanAeroscout | current | The objects in this group define attributes that control the settings of the Aeroscout functionality for iWLAN. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.3 | ScalarsnMspsWlanAeroscoutState | read-only | current | This is a status variable. It is written by an local management entity. The object represents the current state of the Aeroscout module. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.5 | ScalarsnMspsWlanAeroscoutTagInformationForwarding | read-only | current | This is a status variable. It is written by an local management entity. The object represents the current state of the Aeroscout information tag forwarding to … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.8 | ScalarsnMspsWlanAeroscoutEnginePort | read-only | current | This is a status variable. It is written by an local management entity. The object represents the current port number of the engine |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.10 | ScalarsnMspsWlanAeroscoutResponsePort | read-only | current | This is a status variable. It is written by an local management entity. The object represents the port number, which will be used for the response to the engin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.12 | ScalarsnMspsWlanAeroscoutResponseIp | read-only | current | This is a status variable. It is written by an local management entity. The object represents the IP address, which will be used for the response to the engine. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.14 | ScalarsnMspsWlanAeroscoutMulticastAddress | read-only | current | This is a status variable. It is written by an local management entity. The object represents the multicast address, which will be used for the response to the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.16 | ScalarsnMspsWlanAeroscoutAckSent | read-only | current | This is a status variable. It is written by an local management entity. The object represents the cumulated number of Aeroscout acknowledges, which were sent b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.18 | ScalarsnMspsWlanAeroscoutMsgDrop | read-only | current | This is a status variable. It is written by an local management entity. The object represents the cumulated number of dropped Aeroscout messages, which were re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.40 | TablesnMspsWlanAeroscoutConfigTable | not-accessible | current | This table represents settings for an Aeroscout operating mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.40.1 | RowsnMspsWlanAeroscoutEntry | not-accessible | current | An entry in the snMspsWlanAeroscoutTable, representing the Aeroscout configuration attributes for an iWLAN radio interface. An entry (conceptual row) will be c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.13.40.1.2 | ColumnsnMspsWlanAeroscoutEnable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16 | IdentitysnMspsWlanInterAPBlocking | current | The objects in this group define attributes that control the settings of the Inter AP Blocking functionality for iWLAN. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.10 | TablesnMspsWlanInterAPBlockingConfigTable | not-accessible | current | This table represents global settings for Inter AP Blocking on corresponding VAP interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.10.1 | RowsnMspsWlanInterAPBlockingConfigEntry | not-accessible | current | An entry in the snMspsWlanInterAPBlockingConfigTable, representing the Inter AP Blocking configuration attributes for a VAP interface. An entry (conceptual row… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.10.1.2 | ColumnsnMspsWlanInterAPBlockingConfigEnable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.10.1.5 | ColumnsnMspsWlanInterAPBlockingConfigGratuitousARPStatus | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.10.1.8 | ColumnsnMspsWlanInterAPBlockingConfigAccFrameType | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.17 | ScalarsnMspsWlanInterAPBlockingRefreshInterval | read-write | current | This is a status variable. It is written by an local management entity. The object represents the time interval in seconds for refreshing state of entries in s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20 | TablesnMspsWlanInterAPBlockingAddressTable | not-accessible | current | This table represents attributes about allowed adresses on corresponding VAP interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1 | RowsnMspsWlanInterAPBlockingAddressEntry | not-accessible | current | An entry in the snMspsWlanInterAPBlockingAddressTable, representing the configuration attributes of an allowed addresses on corresponding VAP interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1.1 | ColumnsnMspsWlanInterAPBlockingAddressIndex | not-accessible | current | This is an auxiliary index variable. It is written by the local management entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1.4 | ColumnsnMspsWlanInterAPBlockingAddressType | read-create | current | This is a control variable. It is written by the local management entity. Destination Address Type of corresponding entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1.5 | ColumnsnMspsWlanInterAPBlockingAddress | read-create | current | This is a control variable. It is written by the local management entity. Address of corresponding entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1.6 | ColumnsnMspsWlanInterAPBlockingResolverAddressType | read-create | current | This is a control variable. It is written by the local management entity. Resolver Address Type of corresponding entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1.7 | ColumnsnMspsWlanInterAPBlockingResolverAddress | read-create | current | This is a control variable. It is written by the local management entity. Resolver Address of corresponding entry. In order to have allowed IPs in different su… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1.8 | ColumnsnMspsWlanInterAPBlockingMac | read-only | current | This is a status variable. It is written by the local management entity. MAC address, which is currently operating on the IP address in the configured entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.16.20.1.25 | ColumnsnMspsWlanInterAPBlockingAddressRowStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19 | IdentitysnMspsWlanIPRP | current | The objects in this group define attributes that control the settings of the industrial Parallel Redundancy Protocol (iPRP) functionality for iWLAN. This featu… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.3 | ScalarsnMspsWlanIPRPEthernetInterface | read-write | current | This is a control variable. It is written by the local management entity. The object represents the interface index of Ethernet port, which will be used for iP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.7 | TablesnMspsWlanIPRPNetworkConfigTable | not-accessible | current | This table represents global settings for the iPRP configuration attributes for PRP network |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.7.1 | RowsnMspsWlanIPRPNetworkConfigEntry | not-accessible | current | An entry in the snMspsWlanIPRPNetworkConfigTable, representing the iPRP configuration attributes for PRP network An entry (conceptual row) will be created for … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.7.1.1 | ColumnsnMspsWlanIPRPNetworkIndex | not-accessible | current | This is an auxiliary index object which is used to identify instances of the columnar objects in the snMspsWlanIPRPNetworkConfigEntry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.7.1.5 | ColumnsnMspsWlanIPRPNetworkConfigLanA | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.7.1.6 | ColumnsnMspsWlanIPRPNetworkConfigLanB | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.10 | TablesnMspsWlanIPRPIfConfigTable | not-accessible | current | This table represents global settings for the iPRP configuration attributes on corresponding interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.10.1 | RowsnMspsWlanIPRPIfConfigEntry | not-accessible | current | An entry in the snMspsWlanIPRPIfConfigTable, representing the iPRP configuration attributes for corresponding interface An entry (conceptual row) will be creat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.10.1.5 | ColumnsnMspsWlanIPRPIfConfigPRPNetwork | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.10.1.9 | ColumnsnMspsWlanIPRPIfApRedundancy | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. If radio-redundancy… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.10.1.10 | ColumnsnMspsWlanIPRPIfConfigEnable | read-write | current | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. The object represen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15 | TablesnMspsWlanIPRPInfoTable | not-accessible | current | This table represents attributes that allow for the diagnosis of the clients associated to an access point using iPRP. The ifIndex represents the wireless radi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1 | RowsnMspsWlanIPRPInfoEntry | not-accessible | current | An entry in the snMspsWlanIPRPInfoTable, representing a single client's current operational parameters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.2 | ColumnsnMspsWlanIPRPInfoClientMacAddress | not-accessible | current | This is an index variable. This object represents the MAC address of a non-AP-station, which is currently connected using iPRP |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.5 | ColumnsnMspsWlanIPRPInfoActivityStatus | read-only | current | This is a status variable. The object represents the current status of iPRP connection from client point of view. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.9 | ColumnsnMspsWlanIPRPInfoPartnerClient | read-only | current | This is a status variable. It is written by the SME when a station connects to the AP. This object represents the MAC address of a non-AP-station, which is the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.10 | ColumnsnMspsWlanIPRPInfoPartnerClientAp | read-only | current | This is a status variable. This object represents the MAC address of an AP-station, which is the iPRP partner of a client, which is the iPRP partner of corresp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.14 | ColumnsnMspsWlanIPRPInfoDeleteFramesTx | read-only | current | This is a status variable. The object represents the number of iPRP delete frames, sent by corresponding client |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.17 | ColumnsnMspsWlanIPRPInfoDeleteFramesRx | read-only | current | This is a status variable. The object represents the number of iPRP delete frames, received by corresponding client |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.20 | ColumnsnMspsWlanIPRPInfoFramesDeleted | read-only | current | This is a status variable. The object represents the number of iPRP frames, which were deleted by corresponding client. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.1.10.19.15.1.30 | ColumnsnMspsWlanIPRPInfoScanningSyncStatus | read-only | current | This is a status variable. The object represents the iPRP scanning synchronization status. This object is only implemented in Client mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.2 | IdentitysnMspsWlanEvents | current | The MIB objects in this group extend the event reporting capabilites of a device. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.2.1 | IdentitysnMspsWlanEventData | current | The WLAN event data objects are organized under this node. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.27.2.1.1 | ScalarsnMspsWlanEventGeneric | accessible-for-notify | current | Contains a textual description of a generic WLAN event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28 | NodesnMspsReport | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.1 | ScalarsnMspsFaultState | read-only | current | Indicates system fault state (state of fault LED/signaling contact). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.2 | ScalarsnMspsSignalledFaults | read-only | current | Number of signaled faults. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.3 | ScalarsnMspsFaultValue | read-only | current | Fault value: 0 = no fault, 0. Octet MSB bit 0 = power, 0. Octet bit 1 = linkdown, 0. Octet bit 2 = internal error, 0. Octet bit 3 = standby, 0. Octet bit 4 = r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.4 | ScalarsnMspsPowerSupply1State | read-only | current | State of power supply line 1. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.5 | ScalarsnMspsPowerSupply2State | read-only | current | State of power supply line 2. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.6 | ScalarsnMspsPowerSupply1Mask | read-write | current | Mask of power supply line 1. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.7 | ScalarsnMspsPowerSupply2Mask | read-write | current | Mask of power supply line 2. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.8 | ScalarsnMspsPowerSupply3Mask | read-write | current | Mask of power supply line 3 (PoE). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.9 | ScalarsnMspsPowerSupply3State | read-only | current | State of power supply line 3 (PoE). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.10 | ScalarsnMspsSetButtonControlDefaults | read-write | current | Enable/disable reset to factory defaults by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.11 | ScalarsnMspsSetButtonControlRm | read-write | current | Enable/disable set redundancy master by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.12 | ScalarsnMspsSetButtonControlFaultMask | read-write | current | Enable/disable set fault mask by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.13 | ScalarsnMspsReportSyslogStatus | read-write | current | This object is for enabling or disabling SYSLOG in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.14 | ScalarsnMspsReportSmtpStatus | read-write | current | This object is for enabling or disabling SMTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.30 | ScalarsnMspsReportSmsStatus | read-write | current | This object is for enabling or disabling SMS functionality in the system. Enabling is only supported on devices with corresponding functionality. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.40 | ScalarsnMspsReportSignalingContactControl | read-write | current | Set signalling contact control to conventional or to alligned. - Conventional: Contact opened when Fault - Aligned: Contact controlled by snSignalingContactSta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.41 | ScalarsnMspsReportSignalingContactState | read-write | current | Set state of signalling contact - takes only affect if snSignalingContactControl is set to aligned (2) - on: contact closed - off: contact opened |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.42 | ScalarsnMspsFaultResetCounters | read-write | current | Reset all fault counters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.50 | ScalarsnMspsPowerSupplyRedundancyMonitor | read-write | current | In case the redundant power supply will be monitored by PROFINET, the value of this object defines, which power lines have to be considered. all(1) - all avail… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.54 | ScalarsnMspsSetButtonControlRestart | read-write | current | Enable/disable restart device by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60 | TablesnMspsReportFaultStateTable | not-accessible | current | Fault state table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1 | RowsnMspsReportFaultStateEntry | not-accessible | current | Fault state table rows entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.1 | ColumnsnMspsReportFaultIndex | not-accessible | current | Index of fault state table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.2 | ColumnsnMspsReportFaultStateTimeStamp | read-only | current | The current value of sysUpTime, when the relevant fault state occurs. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.3 | ColumnsnMspsReportFaultState | read-only | current | Fault state. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.4 | ColumnsnMspsReportFaultStateClear | read-write | current | Write access using delete(1) leads to deleting relevant fault state from system. Read access to this MIB object will return no-operation(0), if this entry is i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80 | TablesnMspsReportEventTable | not-accessible | current | A table which contains the targets to which notifications shall be sent |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1 | RowsnMspsReportEventEntry | not-accessible | current | Different kinds of notifications can be configured per event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.1 | ColumnsnMspsReportEventIndex | not-accessible | current | The unique index of each event, which has to be configured |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.2 | ColumnsnMspsReportEventType | read-only | current | Enables or disables different kinds the occurred events could be processed. Possible values are: 0 - Cold or Warm start notification 1 - Link change notificati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.3 | ColumnsnMspsReportEventMail | read-write | current | Enables/disables mail notification when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.4 | ColumnsnMspsReportEventLog | read-write | current | Enables/disables creating log entry when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.5 | ColumnsnMspsReportEventTrap | read-write | current | Enables/disables sending traps when relevant event occurs. If this kind of notifi-cation is not supported by event, the write access with true will return bad … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.6 | ColumnsnMspsReportEventSysLog | read-write | current | Enables/disables creating syslog entry when relevant event occurs. If this kind of notification is not supported by event, the write access with true will retu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.7 | ColumnsnMspsReportEventFault | read-write | current | Enables/disables fault notification when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85 | TablesnMspsReportSeverityTable | not-accessible | current | A table which contains the severity levels for given client types |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1 | RowsnMspsReportSeverityEntry | not-accessible | current | Different kinds of severities can be configured per client type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1.1 | ColumnsnMspsReportSeverityIndex | not-accessible | current | The unique index of each event, which has to be configured with a severity |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1.2 | ColumnsnMspsReportSeverityClientType | read-only | current | The client type of the entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1.3 | ColumnsnMspsReportSeveritySeverity | read-write | current | The severity level of the given client type |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.90 | ScalarsnMspsReportServiceInformation | accessible-for-notify | current | Description of service information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29 | NodesnMspsPort | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.10 | NodesnMspsPortLinkFlapDetection | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.10.1 | ScalarsnMspsPortLinkFlapCount | read-write | current | This object holds the number flap count that is allowed within the snMspsPortLinkFlapTime |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.10.2 | ScalarsnMspsPortLinkFlapTime | read-write | current | This object holds the time duration in seconds for the flap monitoring |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.10.3 | ScalarsnMspsPortLinkFlapReaction | read-write | current | This object holds the reaction type when the link flap error is detected. If notify is configured, only notifcation will be done. if notify and power down is c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90 | TablesnMspsPortTable | not-accessible | current | Table containing per-port objects in the form of private extensions of interface objects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1 | RowsnMspsPortEntry | not-accessible | current | Interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.1 | ColumnsnMspsPortIndex | read-only | current | Unique number for each interface. The number is in the range 1 to 26. The number for each interface must remain constant at least from one re-initialization of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.2 | ColumnsnMspsPortFaultMaskState | read-write | current | Mask for checking link state of the port. If a link of a masked as link down (checked-link-down) port is down then a fault will be generated. If a link of a ma… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.3 | ColumnsnMspsPortLockState | read-write | current | Lock state of the port. disabled (1) - MAC Learning and Forwarding enabled. Dynamic entries can be added. enabled (2) - MAC Learning and Forwarding disabled. D… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.4 | ColumnsnMspsPortFlowControlStatus | read-only | current | Current state of Flow Control on the port returned from the hardware |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.6 | ColumnsnMspsPortStandbyMaskState | read-write | current | Mask for standby ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.7 | ColumnsnMspsPortBroadcastBlocking | read-write | current | Enable / Disable broadcast blocking. Used to select which ports are prevented from being forwarded broadcast packets. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.8 | ColumnsnMspsPortDcpConfig | read-write | current | The administratively desired behavior of the device for DCP frames. If the associated snMspsPortDcpConfig object has a value of 'rxOnly(2)', then the device wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.9 | ColumnsnMspsPortUnknownMulticastBlocking | read-write | current | Enable / Disable unknown multicast blocking. Used to select which ports are prevented from being forwarded multicast packets to unknown multicast addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.10 | ColumnsnMspsPortActive | read-write | current | Setting this object to false(2) forces link down on this ports and its connected devices. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.11 | ColumnsnMspsPortUnknownUnicastBlocking | read-write | current | Enable / Disable unknown unicast blocking. Used to select which ports are prevented from being forwarded unicast packets to unknown unicast addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.12 | ColumnsnMspsPortMediaType | read-write | current | Defines the currently active media type of the combo port. Write access is only allowed for combo ports, i.e. ports that consist of both a copper port and an o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.13 | ColumnsnMspsPortEnhPassListComp | read-write | current | Enables or disables Enhanced Passive listening Compatibility mode on a specific port. The global object snMspsEnhancedPassiveListeningCompatibility must be con… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.14 | ColumnsnMspsPortQoSTrustMode | read-write | current | not-available (0) - the port qos trust mode is not supported untrust (1) - packet qos parameters are assigned as per port default priority settings trust-cos (… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.15 | ColumnsnMspsPortBlockState | read-only | current | not-available (0) - the port block state analysis is not supported forwarding (1) - not blocked by any configuration or protocol ring-redundancy (2) - blocked … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.20 | ColumnsnMspsPortRouterAdvertisementBlocking | read-write | current | not-available (0) - Ipv6 Router Advertisements blocking not supported enabled (1) - Ipv6 Router Advertisements blocking enabled disabled (2) - Ipv6 Router Adve… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.25 | ColumnsnMspsPortAdminMacLearningStatus | read-write | current | Truth value used to configure the unicast MAC learning Admin status for the port. Value true (1), allows the unicast MAC learning on the port. Value false(2), … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.30 | ColumnsnMspsPortMacLearningFlush | read-write | current | not-available (0) - This feature is not supported. disabled (1) - On link down, learnt MAC will not be flushed port-flush (2) - On link down, learnt MAC will b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.35 | ColumnsnMspsPortNOACtrlMode | read-write | current | Sets the port to access with Operational Technology (OT) Network or Information Technology (IT) Network or both. Support only for physical ports and not for LA… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.44 | ColumnsnMspsPortUnicastMacThreshold | read-write | current | The monitoring threshold for the maximum number of distinct unicast destination MAC addresses learnt over this interface. The upper threshold value that can be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.45 | ColumnsnMspsPortUnicastMacLearnt | read-only | current | Current number of distinct unicast destination MAC addresses learnt over this interface. This value is updated periodically. The frequency of updates can vary … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.46 | ColumnsnMspsPortUnicastMacAction | read-write | current | Action in case the monitoring threshold is exceeded. The default value is 0. It means no action only notification. 1 means port power down. 2 means port power … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.47 | ColumnsnMspsPortUnicastMacLearningState | read-only | current | The default value is 0(off). It means no monitoring threshold started. 1(on) means threshold monitoring active. 2(transgression) means threshold transgression … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.50 | ColumnsnMspsPortLinkState | read-only | current | up (1) - Link up on intercface down (2) - Either there's no link or interface not present |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.55 | ColumnsnMspsPortDhcpSnooping | read-write | current | The default value is 0(disabled). It means no DHCP snooping enabled. 1(client) - Port connected to Client. When Offer/Ack packets received in this port, it wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.56 | ColumnsnMspsPortFsuSupport | read-write | current | Fast start up support. disabled (2) - Fast start up support is disabled . enabled (1) - Fast start up support is enabled . |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30 | NodesnMspsAcl | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.1 | ScalarsnMspsACLControl | read-write | current | Control Object for ACL Learning. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4 | TablesnMspsAclL2FilterTable | not-accessible | current | A table to configure L2 filter rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1 | RowsnMspsAclL2FilterEntry | not-accessible | current | Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.1 | ColumnsnMspsAclL2FilterNo | not-accessible | current | L2 Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.2 | ColumnsnMspsAclL2FilterPriority | read-write | current | The priority of the L2 filter can be used to decide which filter rule is applicable when Higher value of 'filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.3 | ColumnsnMspsAclL2FilterEtherType | read-write | current | The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.4 | ColumnsnMspsAclL2FilterProtocolType | read-write | current | Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.5 | ColumnsnMspsAclL2FilterDstMacAddr | read-write | current | Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.6 | ColumnsnMspsAclL2FilterSrcMacAddr | read-write | current | Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.7 | ColumnsnMspsAclL2FilterVlanId | read-write | current | Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.8 | ColumnsnMspsAclL2FilterInPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.9 | ColumnsnMspsAclL2FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.10 | ColumnsnMspsAclL2FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.11 | ColumnsnMspsAclL2FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.12 | ColumnsnMspsAclL2FilterOutPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets egress at Ports in this list. If the Out port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.13 | ColumnsnMspsAclL2FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5 | TablesnMspsAclL3FilterTable | not-accessible | current | A table to configure L3 filter rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1 | RowsnMspsAclL3FilterEntry | not-accessible | current | Each entry in this table is a L3 filter rule. Index to the table is L3 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.1 | ColumnsnMspsAclL3FilterNo | not-accessible | current | L3 Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.2 | ColumnsnMspsAclL3FilterPriority | read-write | current | The priority of the filter can be used to decide which filter rule is applicable when Higher value of 'L3 filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.3 | ColumnsnMspsAclL3FilterProtocol | read-write | current | The type of protocol to be checked against the packet. The default value is 255. If the value is 255, it means that the protocol type can be anything and it wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.4 | ColumnsnMspsAclL3FilterMessageType | read-write | current | The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.5 | ColumnsnMspsAclL3FilterMessageCode | read-write | current | The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.6 | ColumnsnMspsAclL3FilteAddrType | read-create | current | The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a cl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.7 | ColumnsnMspsAclL3FilterDstIpAddr | read-create | current | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. snMspsAclL3FilterDstIpAddrP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.8 | ColumnsnMspsAclL3FilterSrcIpAddr | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. snMspsAclL3FilterSrcIpAddrPrefix… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.9 | ColumnsnMspsAclL3FilterDstIpAddrPrefixLength | read-create | current | The length of the CIDR Prefix carried in snMspsAclL3FilterDstIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.10 | ColumnsnMspsAclL3FilterSrcIpAddrPrefixLength | read-create | current | The length of the CIDR Prefix carried in snMspsAclL3FilterSrcIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.11 | ColumnsnMspsAclL3FilterMinDstProtPort | read-write | current | The minimum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.12 | ColumnsnMspsAclL3FilterMaxDstProtPort | read-write | current | The maximum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.13 | ColumnsnMspsAclL3FilterMinSrcProtPort | read-write | current | The minimum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.14 | ColumnsnMspsAclL3FilterMaxSrcProtPort | read-write | current | The maximum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.15 | ColumnsnMspsAclL3FilterInPortList | read-write | current | Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable. If the incoming port list is '0', the filter rule is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.16 | ColumnsnMspsAclL3FilterOutPortList | read-write | current | Specifies the complete set of ports over which if the packet goes out, this filter rule will be applicable. If the outgoing port list is '0', the filter rule i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.17 | ColumnsnMspsAclL3FilterAckBit | read-create | current | The TCP ACK bit to be checked against the packet. The default value is 'any'(3). It means that ACK bit will not be checked to decide the action. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.18 | ColumnsnMspsAclL3FilterRstBit | read-create | current | The TCP RST bit to be checked against the packet. The default value is 'any'(3). It means that RST bit will not be checked to decide the action. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.19 | ColumnsnMspsAclL3FilterTos | read-create | current | The IP TOS bit to be checked against the packet. This is a single byte integer of which the last three bits (least significant bits) indicate Delay, Throughput… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.20 | ColumnsnMspsAclL3FilterDscp | read-create | current | The IP Dscp value to be checked against the packet. A value of '-1' means, the Dscp Field becomes dont care. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.21 | ColumnsnMspsAclL3FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.22 | ColumnsnMspsAclL3FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be sent to the ports in 'out port list'. I… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.23 | ColumnsnMspsAclL3FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.24 | ColumnsnMspsAclL3FilterFlowId | read-create | current | The flow identifier in an IPv6 header. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.25 | ColumnsnMspsAclL3FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8 | NodesnMspsAclPreOrder | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1 | TablesnMspsAclPreOrderTable | not-accessible | current | A list of ACL Rule Order Precedence information interface entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1 | RowsnMspsAclPreOrderEntry | not-accessible | current | An entry containing ACL Rule Order Precedence to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.1 | ColumnsnMspsAclPreOrderIfIndex | not-accessible | current | A unique value, greater than zero, of the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.2 | ColumnsnMspsAclPreOrderMACInFilterList | read-write | current | The list of MAC in filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.3 | ColumnsnMspsAclPreOrderMACOutFilterList | read-write | current | The list of MAC out filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.4 | ColumnsnMspsAclPreOrderIPInFilterList | read-write | current | The list of IP in filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.5 | ColumnsnMspsAclPreOrderIPOutFilterList | read-write | current | The list of IP out filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9 | NodesnMspsAclGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1 | TablesnMspsAclGroupTable | not-accessible | current | A table to apply configured L2 and l3 filter rules to interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1 | RowsnMspsAclGroupEntry | not-accessible | current | An entry containing l2 and l3 ACL Rules Order Precedence to a interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.1 | ColumnsnMspsAclGroupIndex | not-accessible | current | A unique group rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.2 | ColumnsnMspsAclGroupName | read-write | current | An administratively assigned string, which may be used to identify the group. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.3 | ColumnsnMspsAclGroupPreOrderMACInFilterList | read-write | current | The list of MAC in filrers added for this group with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of zer… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.4 | ColumnsnMspsAclGroupPreOrderMACOutFilterList | read-write | current | The list of MAC out filrers added for this group with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of ze… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.5 | ColumnsnMspsAclGroupPreOrderIPInFilterList | read-write | current | The list of IP in filrers added for this group with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of zero… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.6 | ColumnsnMspsAclGroupPreOrderIPOutFilterList | read-write | current | The list of IP out filrers added for this group with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of zer… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.7 | ColumnsnMspsAclGroupApplyToIfIndex | read-write | current | This object used to configure mapped acl rules to given interface and this object will not save in system |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.9.1.1.20 | ColumnsnMspsAclGroupStatus | read-create | current | Indicates the status of the row. Valid values are createAndGo(4) and destroy(6). An entry is created in this table when this object is SET to 'createAndGo'. An… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31 | NodesnMspsLog | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.1 | ScalarsnMspsLogMaxEntries | read-only | current | Maximum number of events that can be kept in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.2 | ScalarsnMspsLogCurrentEntries | read-only | current | Number of events that are currently kept log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.3 | ScalarsnMspsLogBookAlarmThreshold | read-write | current | This MIB object creates an event when the threshold value is reached. Maximum threshold settings depends upon the system MAX Logbook entries per level. Setting… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.4 | ScalarsnMspsLogClear | read-write | current | Setting this object to start-clear(2) value, clears the events that are kept in Non-Volatile Memory. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5 | TablesnMspsLogTable | not-accessible | current | The table contains the last events that occurred in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1 | RowsnMspsLogEntry | not-accessible | current | The description of an event that occurred in the system, and was stored in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.1 | ColumnsnMspsLogEntryIdx | read-only | current | Log book ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.2 | ColumnsnMspsLogEntryId | read-only | current | Log book internal ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.3 | ColumnsnMspsLogRestart | read-only | current | Log book entrys restart number |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.4 | ColumnsnMspsLogSysUpTime | read-only | current | System up time of entry in ASCII |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.5 | ColumnsnMspsLogDescr | read-only | current | ASCII description of the event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.6 | ColumnsnMspsLogSeverity | read-only | current | Severity level of the event |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.7 | ColumnsnMspsLogSysTime | read-only | current | System time information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.6 | ScalarsnMspsLogWarningEventsDay | read-only | current | Number of warning events occurred within last 24 hours. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.7 | ScalarsnMspsLogCriticalEventsDay | read-only | current | Number of critical events occurred within last 24 hours. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.10 | ScalarsnMspsLogUserSeverity | read-write | current | Setting the severity for the next generated log entry via SNMP. Object is Non-Volatile. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.11 | ScalarsnMspsLogUserCreate | read-write | current | Creates the corresponding log entry with the given input as text and severity from snMspsLogUserSeverity |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.20 | ScalarsnMspsSecurityLogMaxEntries | read-only | current | Maximum number of security-relevant events that can be kept in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.21 | ScalarsnMspsSecurityCurrentEntries | read-only | current | Number of security events that are currently present in the log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.22 | ScalarsnMspsSecurityLogClear | read-write | current | Setting this object to start-clear(2) value, clears the security events that are kept in Non-Volatile Memory. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25 | TablesnMspsSecurityLogTable | not-accessible | current | The table contains the last security events that occurred in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1 | RowsnMspsSecurityLogEntry | not-accessible | current | The description of an event that occurred in the system, and was stored in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.1 | ColumnsnMspsSecurityLogEntryIdx | read-only | current | Log book ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.2 | ColumnsnMspsSecurityLogEntryId | read-only | current | Log book internal ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.3 | ColumnsnMspsSecurityLogRestart | read-only | current | Log book entrys restart number |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.4 | ColumnsnMspsSecurityLogSysUpTime | read-only | current | System up time of entry in ASCII |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.5 | ColumnsnMspsSecurityLogDescr | read-only | current | ASCII description of the event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.6 | ColumnsnMspsSecurityLogSeverity | read-only | current | Severity level of the security event |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.7 | ColumnsnMspsSecurityLogSysTime | read-only | current | System time information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32 | NodesnMspsPnio | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.1 | ScalarsnMspsPnioEnable | read-write | deprecated | The value enabled(1) will automatically run PROFINET. The value disabled(2) will inhibit PROFINET. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.2 | ScalarsnMspsPnioInDataExchange | read-only | current | Show the state of PROFINETInDataExchange. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.3 | ScalarsnMspsPnioNameOfStation | read-write | current | Name of Station of the device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.4 | ScalarsnMspsPnioInDataExchangeControl | read-write | current | allow-online (1) allows the device to change in PROFINETInDataExchange online. force-to-offline (2) force the device to PROFINETInDataExchange offline. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.5 | ScalarsnMspsPnioFaultMode | read-write | current | Controls the PROFINET diagnostics behaviour for the PROFINET device: latent (1) - The device doesn't notify any PROFINET fault evident (2) - The device sets a … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.6 | ScalarsnMspsPnioResetIpCfgOnRestart | read-write | current | If true, resets the (temporary) IP configuration to 0.0.0.0 when the device restarts and then also resets this object to false. Should thus be set to false whe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.9 | ScalarsnMspsPnioAdminStatus | read-write | current | Shows the next Mode of PROFINET after the next reboot takes place. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.10 | ScalarsnMspsPnioOperStatus | read-only | current | Shows the current Mode of PROFINET. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20 | TablesnMspsPnioHoldTimeTable | not-accessible | current | The table contains Hold Time information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20.1 | RowsnMspsPnioHoldTimeEntry | not-accessible | current | Hold Time is stored. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20.1.1 | ColumnsnMspsPnioHoldTimeEntryIndex | read-only | current | Index of the Hold Time Entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20.1.2 | ColumnsnMspsPnioHoldTimeValue | read-only | current | Hold Time of an entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33 | NodesnMspsNtp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1 | NodesnMspsNtpCommon | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.1 | ScalarsnMspsNtpCommonSysStatus | read-write | current | The NTP module functionality Operational status, if it is enabled it will send the NTP Message to the peer and synchronize peer and or synchronized by peer. se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.2 | ScalarsnMspsNtpCommonTimeZoneDiffTime | read-write | current | Set the Timezone Diff Time with the UTC Time representation or any other ime representation. format is +/-HH:MM |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.3 | ScalarsnMspsNtpCommonSysDateAndTime | read-only | current | This object give the current system date and time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.4 | ScalarsnMspsNtpCommonTraceFlag | read-write | current | This object used to configure the trace level of the NTP module. Find the values and corresponding trace information 1.Disable traces 0x00000000 2.Error traces… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2 | NodesnMspsNtpClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1 | TablesnMspsNtpClientPeerTable | not-accessible | current | This table provides information on the peers with which the local NTP has associations. The peers are also NTP servers but running on different hosts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1 | RowsnMspsNtpClientPeerEntry | not-accessible | current | Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.1 | ColumnsnMspsNtpClientPeerAssocId | not-accessible | current | An integer value greater than 0 that uniquely identifies a peer with which the local NTP server/client is associated. This value is depends on the no of client… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.2 | ColumnsnMspsNtpClientPeerPeerAddrType | read-write | current | Represents the type of the corresponding instance of snMspsNtpClientPeerPeerInetAddress object. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.3 | ColumnsnMspsNtpClientPeerPeerInetAddress | read-write | current | The address of the peer. When creating a new association, a value must be set forthis object before the row is made active. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.4 | ColumnsnMspsNtpClientPeerPeerPort | read-write | current | The UDP port number on which the peer receives NTP messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.5 | ColumnsnMspsNtpClientPeerPeerStratum | read-only | current | The stratum of the peer clock. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.6 | ColumnsnMspsNtpClientPeerPeerPrecision | read-only | current | Signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.7 | ColumnsnMspsNtpClientPeerPeerRefId | read-only | current | The reference identifier of the peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.8 | ColumnsnMspsNtpClientPeerHostPoll | read-write | current | The interval at which the local host polls the peer. The minimum interval between transmitted NTP messages, in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.9 | ColumnsnMspsNtpClientPeerHostOffset | read-only | current | The estimated offset of the the local clock relative to the peer clock, in seconds. The host determines the value of this object using the NTP clock-filter alg… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.10 | ColumnsnMspsNtpClientPeerHostDelay | read-only | current | The estimated round-trip delay of the local clock relative to the peer clock over the network path between them, in seconds. The host determines the value of t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.11 | ColumnsnMspsNtpClientPeerEntryStatus | read-create | current | The status object for this row. When a management station is creating a new row, it should set the value for snMspsNtpClientPeerPeerInetAddress at least, befor… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.24 | ColumnsnMspsNtpClientPeerSecureKeyID | read-write | current | The ID of the key, to tell the secure NTP server which key is used. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.25 | ColumnsnMspsNtpClientPeerSecureAlgorithm | read-write | current | Hash algorithm, which is used in secure NTP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.29 | ColumnsnMspsNtpClientPeerSecureKey | read-write | current | Secure key, which is used in secure NTP during authenti-cation. The key is encrypted before saving in configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.5 | ScalarsnMspsNtpClientPeerSecure | read-write | current | Enables or disables support of secure NTP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3 | NodesnMspsNtpServer | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.1 | ScalarsnMspsNtpServerStatus | read-write | current | To enable or disable NTP module Server module. If it is enabled NTP Clients will get the time from the Servers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2 | TablesnMspsNtpServerTable | not-accessible | current | This table provides information on the ntp servers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1 | RowsnMspsNtpServerEntry | not-accessible | current | The table contains the ip interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.1 | ColumnsnMspsNtpServerEnable | read-write | current | Enables or disables NTP Server of an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.2 | ColumnsnMspsNtpServerPort | read-write | current | The UDP port number on which the peer receives NTP messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.3 | ColumnsnMspsNtpServerSecureStatus | read-write | current | Enables or disables NTP Secure Server of an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.4 | ColumnsnMspsNtpServerKeyID | read-write | current | Ntp key index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.5 | ColumnsnMspsNtpServerSecureAlgorithm | read-write | current | Hash algorithm, which is used in secure NTP Server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.6 | ColumnsnMspsNtpServerSecureKey | read-write | current | Secure key, which is used in secure NTP Server during authentication. The key is encrypted before saving in configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.7 | ColumnsnMspsNtpServerRowStatus | read-create | current | The status object for this row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34 | NodesnMspsIf | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.1 | NodesnMspsIfCounters | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.1.5 | ScalarsnMspsIfTotalInErrors | read-only | current | This object returns the the sum of ifInErrors counters of all interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.1.20 | ScalarsnMspsIfDiscardsDay | read-only | current | This object returns the the sum of ifInDiscards and ifOutDiscards of all interfaces in the last 24hours |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.1.21 | ScalarsnMspsIfDiscardsWeek | read-only | current | This object returns the the sum of ifInDiscards and ifOutDiscards of all interfaces in the last 7 days |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4 | TablesnMspsIfMainTable | not-accessible | current | A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table can be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1 | RowsnMspsIfMainEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.1 | ColumnsnMspsIfMainIndex | not-accessible | current | A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.2 | ColumnsnMspsIfMainType | read-create | current | The type/protocol of interface. Specification of the object is mandatory for all interfaces. This value should be specified after the row creation in the snMsp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.3 | ColumnsnMspsIfMainMtu | read-create | current | The MTU for the interface as shown to the higher interface sub-layer (this value should not include the encapsulation or header added by the interface). If IP … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.4 | ColumnsnMspsIfMainAdminStatus | read-create | current | The desired state of the interface. This object can be set only when the snMspsIfMainRowStatus of the interface is active. This object has the semantics of the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.5 | ColumnsnMspsIfMainOperStatus | read-only | current | The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported current… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.6 | ColumnsnMspsIfMainEncapType | read-write | current | The encapsulation type to be used over the interface. For Ethernet interfaces, the default encapsulation type is ethernetV2(8). The other possible encapsulatio… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.7 | ColumnsnMspsIfMainBrgPortType | read-write | current | The Bridge port type of this specified switch port. Bridge Port type can be specified only for switch ports and not for router ports, IVR interfaces and I-LAN … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.8 | ColumnsnMspsIfMainRowStatus | read-create | current | A RowStatus variable for addition (except for physical interfaces), deletion (except for physical interfaces ) and in-activation of the interfaces. Specificati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.9 | ColumnsnMspsIfMainSubType | read-write | current | This object stores the subType value of the specified interface. Configuration of this object is not mandatory.By default Sub type value will be updated based … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5 | TablesnMspsIfIpTable | not-accessible | current | A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1 | RowsnMspsIfIpEntry | not-accessible | current | An entry containing management information applicable to a particular interface over which IP is operating. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.1 | ColumnsnMspsIfIpAddrAllocMethod | read-write | current | The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only for PPP and MLPPP interfaces which support obt… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.2 | ColumnsnMspsIfIpAddr | read-write | current | Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.3 | ColumnsnMspsIfIpSubnetMask | read-write | current | Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.4 | ColumnsnMspsIfIpBroadcastAddr | read-write | current | Specifies the IP broadcast address for this interface. The value should be specified only for network interfaces and any valid broadcast address based on a val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.5 | ColumnsnMspsIfIpForwardingEnable | read-write | current | Specifies whether IP forwarding is enable on this interface. Disabling IP forwarding on an interface will result in packets which are to be forwarded on that i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.6 | ColumnsnMspsIfIpAddrAllocProtocol | read-write | current | Specifies the protocol to be used to obtain IP address for this interface. This object is valid only when snMspsIfIpAddrAllocMethod is set to dynamic (3). Curr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.7 | ColumnsnMspsIfIpInterfaceName | read-write | current | Interface name for IP interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8 | TablesnMspsIfIvrTable | not-accessible | current | A list of all the interfaces in the system with IVR related configurations. This table is an extension to the snMspsIfMainTable. The index to this table has th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8.1 | RowsnMspsIfIvrEntry | not-accessible | current | An entry containing IVR-related information applicable to a interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8.1.1 | ColumnsnMspsIfIvrBridgedIface | read-write | current | Indicates if this interface is a Bridged interface or not. A value of 'TRUE' indicates that this interface is a Bridged interface and is capable of performing … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8.1.2 | ColumnsnMspsIfIvrLoopBackIface | read-write | current | Indicates if this interface is a IVR Loopback interface or not. A value of 'TRUE' indicates that this IVR interface is a Loopback Interface. A value of 'FALSE'… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11 | TablesnMspsIfSecondaryIpAddressTable | not-accessible | current | A list of secondary IP addresses configured over the interfaces registered with IP. This table is a extension to the snMspsIfMainTable. The index to this table… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1 | RowsnMspsIfSecondaryIpAddressEntry | not-accessible | current | An entry contains the information associated with the secondary(additional) ip address configured to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.1 | ColumnsnMspsIfSecondaryIpAddress | not-accessible | current | Specifies the Secondary IP address associated with the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.2 | ColumnsnMspsIfSecondaryIpSubnetMask | read-write | current | Specifies the IP Subnet Mask associted with the secondary ip address configuration. The value should be specified only for network interfaces and any valid VLS… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.3 | ColumnsnMspsIfSecondaryIpBroadcastAddr | read-write | current | Specifies the IP broadcast address associated with the configured secondary IP address. The value should be specified only for network interfaces and any valid… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.4 | ColumnsnMspsIfSecondaryIpRowStatus | read-write | current | This object is used to manage creation and deletion of rows in this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.5 | ColumnsnMspsIfSecondaryIpInterfaceName | read-write | current | Interface name for secondary IP interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15 | TablesnMspsIfOverviewIpAddressTable | not-accessible | current | A list of primary and secondary IP addresses configured over the interfaces registered with IP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1 | RowsnMspsIfOverviewIpAddressEntry | not-accessible | current | An entry contains the information associated with the primary and secondary(additional) ip addresses configured to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.1 | ColumnsnMspsIfOverviewIpAddress | not-accessible | current | Shows primary and secondary IP addresses associated with the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.2 | ColumnsnMspsIfOverviewIpSubnetMask | read-only | current | Shows the IP Subnet Mask associted with the primary and secondary ip addresses configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.3 | ColumnsnMspsIfOverviewIpBroadcastAddr | read-only | current | Shows the IP broadcast address associated with the configured primary and secondary IP addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.4 | ColumnsnMspsIfOverviewIpType | read-only | current | Shows IP address type: primary or secondary. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.5 | ColumnsnMspsIfOverviewIpAddressACDStatus | read-only | current | Shows IPV4 Address Collision Detection Status. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18 | TablesnMspsIfIvrMappingTable | not-accessible | current | This table is used to configure the list of vlans to be associated for an IVR interface. The primary Index to this table can only be a IVR interface. Only cons… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18.1 | RowsnMspsIfIvrMappingEntry | not-accessible | current | Each entry in this table gives an assoicated vlan to an IVR interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18.1.1 | ColumnsnMspsIfIvrAssociatedVlan | not-accessible | current | This object specifies one of the associated VLANs for a given IVR interface. Vlan Id associated with an IVR interface during IVR interface creation, should not… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18.1.2 | ColumnsnMspsIfIvrMappingRowStatus | read-create | current | Denotes the Row Status for port isolation table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. 'CreateAndWait' and 'notInService' … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35 | NodesnMspsKeyPlug | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.1 | ScalarsnMspsKeyPlugState | read-only | current | Current state of the KEY-PLUG. Following states are defined: 1 - KEY-PLUG is not present 4 - KEY-PLUG is not accepted 5 - KEY-PLUG is accepted 7 - KEY-PLUG is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.5 | ScalarsnMspsKeyPlugHwOrderId | read-only | current | Order ID (MLFB number) of KEY-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.6 | ScalarsnMspsKeyPlugHwSerialNumber | read-only | current | Serial number of KEY-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.7 | ScalarsnMspsKeyPlugFunction | read-only | current | List of features available with current KEY-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39 | NodesnMspsDigitalIO | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1 | IdentitysnMspsDigitalIOObjects | current | A collection of SNMP MIB objects that support the management of digital input and output lines. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.1 | IdentitysnMspsDigitalIOGeneral | current | A group of management objects with generic scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.1.1 | ScalarsnMspsDigitalIONumberOfInputEntries | read-only | current | This object maintains a count of the number of entries that currently exist in the snMspsDigitalInputTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.1.2 | ScalarsnMspsDigitalIONumberOfOutputEntries | read-only | current | This object maintains a count of the number of entries that currently exist in the snMspsDigitalOutputTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2 | TablesnMspsDigitalInputTable | not-accessible | current | The table contains a list of all digital input lines available in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1 | RowsnMspsDigitalInputEntry | not-accessible | current | An entry in the snMspsDigitalInputTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.1 | ColumnsnMspsDigitalInputIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsDigitalInputTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.2 | ColumnsnMspsDigitalInputName | read-only | current | The object contains the name of the input connector. If the connector is externally accessible, the name will be the same as the one imprinted on the device ho… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.3 | ColumnsnMspsDigitalInputDescr | read-only | current | The object contains a description of the input connector's mechanical charactersitics and of the digital input's electrical characteristics, e.g. the type of t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.4 | ColumnsnMspsDigitalInputAlias | read-write | current | The object contains an 'alias' name for the digital input, as specified by a management entity. It may serve to identify the purpose and meaning of the digital… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.5 | ColumnsnMspsDigitalInputPersistence | read-write | current | The object reflects the type of persistence desired for these objects in the conceptual row: - snMspsDigitalInputTransitionCount. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.6 | ColumnsnMspsDigitalInputLevel | read-only | current | The object reflects the logic level at the digital input. A value of levelLo(1) indicates a signal level of 0 at the digital input, while a value of levelHi(2)… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.7 | ColumnsnMspsDigitalInputCountersImplemented | read-only | current | The object indicates whether the counter objects within an conceptual row are implemented. Otherwise their content must be ignored. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.8 | ColumnsnMspsDigitalInputCountersReset | read-write | current | The object is used to reset all counters in a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.9 | ColumnsnMspsDigitalInputTransitionCount | read-only | current | The object maintains a count of the number of detected transitions between the input levels. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.10 | ColumnsnMspsDigitalInputTrigger | read-write | current | The object specifies whether the digital input shall operate in an edge- triggered or level-triggered mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.11 | ColumnsnMspsDigitalInputEventSource | read-write | current | The object specifies whether the digital input participates in the generation of events that are further processed by the agent's event handler process. It is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.12 | ColumnsnMspsDigitalInputTextFallingEdge | read-write | current | The object contains an text for the digital input falling edge. The text will be used when sending a event sms. By default, the object contains a zero-length s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.13 | ColumnsnMspsDigitalInputTextRisingEdge | read-write | current | The object contains an text for the digital input rising edge. The text will be used when sending a event sms. By default, the object contains a zero-length st… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.2.1.14 | ColumnsnMspsDigitalInputSendingOption | read-write | current | The object contains the sending options. 0 - device does not support the functionality 1 - no event will be sent 2 - event will be sent only by rising edge 3 -… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3 | TablesnMspsDigitalOutputTable | not-accessible | current | The table contains a list of all digital output lines available in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1 | RowsnMspsDigitalOutputEntry | not-accessible | current | An entry in the snMspsDigitalOutputTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.1 | ColumnsnMspsDigitalOutputIndex | not-accessible | current | This auxiliary variable represents a unique index which is used to identify instances of the columnar objects in the snMspsDigitalOutputTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.2 | ColumnsnMspsDigitalOutputName | read-only | current | The object contains the name of the output connector. If the connector is externally accessible, the name will be the same as the one imprinted on the device h… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.3 | ColumnsnMspsDigitalOutputDescr | read-only | current | The object contains a description of the output connector's mechanical charactersitics and of the digital output's electrical characteristics, e.g. the type of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.4 | ColumnsnMspsDigitalOutputAlias | read-write | current | The object contains an 'alias' name for the digital output, as specified by a management entity. It may serve to identify the purpose and meaning of the digita… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.5 | ColumnsnMspsDigitalOutputPersistence | read-write | current | The object specifies the type of persistence desired for these objects in the conceptual row: - snMspsDigitalOutputLevel; - snMspsDigitalOutputTransitionCount. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.6 | ColumnsnMspsDigitalOutputLevel | read-write | current | The object maintains the administratively set logic level of the digital output. A value of levelLo(1) indicates - depending on the electrical circuit design -… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.7 | ColumnsnMspsDigitalOutputCountersImplemented | read-only | current | The object indicates whether the counter objects within an conceptual row are implemented. Otherwise their content must be ignored. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.8 | ColumnsnMspsDigitalOutputCountersReset | read-write | current | The object is used to reset all counters in a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.9 | ColumnsnMspsDigitalOutputTransitionCount | read-only | current | The object maintains a count of the number of administratively initiated transitions between the output levels. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.3.1.12 | ColumnsnMspsDigitalOutputLevelInverted | read-write | current | The object enables the possibility to invert the digital output level state triggered by event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.10 | IdentitysnMspsDigitalIOServices | current | A group of management objects with specific scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.10.5 | TablesnMspsDigitalIOEventTable | not-accessible | current | The table contains a list of all events, which can be configured using digital output in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.10.5.1 | RowsnMspsDigitalIOEventEntry | not-accessible | current | An entry in the snMspsDigitalIOEventTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.39.1.10.5.1.5 | ColumnsnMspsDigitalOutputEventNotification | read-write | current | This is a control variable. It is written by the remote management entity. If set to true, the occurence of the corresponding event will cause handling with Di… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.40 | NodesnMspsStpL2T | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.40.1 | IdentitysnMspsStpL2TObjects | current | A collection of SNMP MIB objects that support the management of Layer-2 Tunnel port specific extensions of the Spanning Tree Protocol (STP). | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.40.1.1 | IdentitysnMspsStpL2TGeneral | current | A group of management objects with generic scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.40.1.1.1 | ScalarsnMspsStpL2TEdgePortStatus | read-write | current | This object represents an administrative specification of whether there may be an end device on a Layer-2 Tunnel port. When disabled and an end device is conne… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.40.1.1.2 | ScalarsnMspsStpL2TAutoEdgePortStatus | read-write | current | This object represents an administrative choice of whether automatic detection of connected end devices at all Layer-2 Tunnel ports is desired. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.45 | NodesnMspsNat | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.45.1 | ScalarsnMspsNatEnabledStatus | read-write | current | Enables or disables NAT globally. snMspsNatDefaultLocalIpAddress and snMspsNatDefaultLocalSubnetmask have to be pre-configured. When disabling NAT, it has not … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.45.5 | ScalarsnMspsNatDefaultLocalIpAddress | read-write | current | The value of this MIB object will be used, when enabling NAT globally, for configuration of local IPv4 interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.45.6 | ScalarsnMspsNatDefaultLocalSubnetmask | read-write | current | The value of this MIB object will be used, when enabling NAT globally, for configuration of local IPv4 interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.45.10 | ScalarsnMspsNatMulticastReceive | read-write | current | If enabled, IPv4 multicast frames will be forwarded from global to local interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.45.11 | ScalarsnMspsNatMulticastTransmit | read-write | current | If enabled, IPv4 multicast frames will be forwarded from local to global interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.45.20 | ScalarsnMspsNatProfinetTransparentMode | read-write | current | If enabled, PROFINET frames from corresponding station will be forwarded between local and global interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.45.21 | ScalarsnMspsNatProfinetNameOfStation | read-write | current | List of corresponding PROFINET station names, which will be considered if snMspsNatProfinetTransparentMode is enabled. '*' means 'any station name'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49 | NodesnMspsDns | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2 | NodesnMspsDNSProxy | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1 | IdentitysnMspsDNSProxyObjects | current | The MIB objects in this group define the Management Information Base for mobile terminal equipment. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.1 | IdentitysnMspsDNSProxyConfig | current | The MIB objects in this group define the Management Information Base for mobile terminal equipment. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.1.1 | ScalarsnMspsDNSProxyActivated | read-write | current | This is a control variable. It is written by the remote management entity. global dns proxy enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.1.2 | ScalarsnMspsDNSProxySyslogActivated | read-write | current | This is a control variable. It is written by the remote management entity. global dns proxy syslog enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.1.3 | ScalarsnMspsDNSProxyCacheNxDomainsImplemented | read-only | current | This is a control variable. It is written by the local management entity. global dns proxy caching of non-existent domain responses capability flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.1.4 | ScalarsnMspsDNSProxyCacheNxDomainsActivated | read-write | current | This is a control variable. It is written by the remote management entity. global dns proxy caching of non-existent domain responses enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.1.5 | ScalarsnMspsDNSProxyCacheNxDomainsTimeout | read-write | current | This is a control variable. It is written by the remote management entity. global dns proxy caching of non-existent domain entries aging time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2 | TablesnMspsDNSProxyCacheTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2.1 | RowsnMspsDNSProxyCacheEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2.1.1 | ColumnsnMspsDNSProxyCacheIndex | not-accessible | current | An auxiliary index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2.1.2 | ColumnsnMspsDNSProxyCacheDomain | read-only | current | The domain name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2.1.3 | ColumnsnMspsDNSProxyCacheAddrType | read-only | current | The IP version of the address. A conforming agent implementation must not return any values other than unknown(0) (either to indicate a pending resolution requ… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2.1.4 | ColumnsnMspsDNSProxyCacheAddress | read-only | current | The IP address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2.1.5 | ColumnsnMspsDNSProxyCacheFlags | read-only | current | The flags indicate more details about the mapping. Bit 0 - The entry is a CNAME resource record . Bit 1 - The entry represents the result of a local, thus stat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.1.2.1.6 | ColumnsnMspsDNSProxyCacheExpires | read-only | current | The date and time when the entry will expire and be purged from the cache. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.2 | IdentitysnMspsDNSProxyEvents | current | The MIB objects in this group extend the event reporting capabilites of a mobile terminal. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.2.3 | IdentitysnMspsDNSProxyConformance | current | The MIB objects in this group extend the event reporting capabilites of a mobile terminal. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3 | NodesnMspsDNSClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1 | IdentitysnMspsDNSClientObjects | current | The MIB objects in this group extend the Management Information Base for DNS clients (resolvers) as defined by the DNS-RESOLVER-MIB. In certain agent implement… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1 | IdentitysnMspsDNSClientConfig | current | The MIB objects in this group define the Management Information Base objects with systemic scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1.1 | ScalarsnMspsDNSClientActivated | read-write | current | This is a control variable. It is written by the remote management entity. The global DNS client enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1.2 | ScalarsnMspsDNSClientManualOverride | read-write | current | This is a control variable. It is written by the remote management entity. -public: only the public name servers in order given by provider are written in /etc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1.3 | ScalarsnMspsDNSSecActivated | read-write | current | This is a control variable. It is written by the remote management entity. The global DNSSec enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1.4 | ScalarsnMspsDNSSecTrustAnchor | read-write | current | This is an auxiliary index. It is written by the remote management entity. The object represents the trust anchor. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2 | TablesnMspsDNSNameServerTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1 | RowsnMspsDNSNameServerEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.1 | ColumnsnMspsDNSNameServerIndex | not-accessible | current | An auxiliary index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.2 | ColumnsnMspsDNSNameServerAddressType | read-create | current | The IP version of the address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.3 | ColumnsnMspsDNSNameServerAddress | read-create | current | The IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.9 | ColumnsnMspsDNSNameServerRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3 | TablesnMspsDNSOperNameServerTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1 | RowsnMspsDNSOperNameServerEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.1 | ColumnsnMspsDNSOperNameServerIndex | not-accessible | current | An auxiliary index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.2 | ColumnsnMspsDNSOperNameServerAddressType | read-only | current | The IP version of the address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.3 | ColumnsnMspsDNSOperNameServerAddress | read-only | current | The IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.4 | ColumnsnMspsDNSOperNameServerOrigin | read-only | current | This is a status variable. It is written by the local management entity. The attribute denotes the origin of the entry's configuration data. - manually configu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8 | TablesnMspsDNSDomainNameTable | not-accessible | current | A table containing the Domain Name List |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1 | RowsnMspsDNSDomainNameEntry | not-accessible | current | Domain Name List Entries |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.1 | ColumnsnMspsDNSDomainNameIndex | not-accessible | current | An arbitrary integer value, greater than zero, which uniquely identifies a Domain Name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.2 | ColumnsnMspsDNSDomainName | read-write | current | The type of object that represents the Domain Name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.3 | ColumnsnMspsDNSDomainNameOrigin | read-only | current | This is a status variable. It is written by the local management entity. The attribute denotes the origin of the entry's configuration data. - manually configu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.100 | ColumnsnMspsDNSDomainNameRowStatus | read-write | current | Specifies the Row Status of the Domain Name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54 | NodesnMspsDst | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1 | NodesnMspsTimezone | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.1 | ScalarsnMspsTimezoneOffset | read-write | current | Show/Set timezone offset (min). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2 | TablesnMspsTimezoneDSTTable | not-accessible | current | A table to configure DST entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1 | RowsnMspsTimezoneDSTEntry | not-accessible | current | An Entry specifies the start and end of a daylight saving time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.1 | ColumnsnMspsTimezoneDSTIndex | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.2 | ColumnsnMspsTimezoneDSTName | read-write | current | Shows and sets the name of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.3 | ColumnsnMspsTimezoneDSTType | read-only | current | Describes whether it is a static or a recurring entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.4 | ColumnsnMspsTimezoneDSTDate | read-write | current | Daylight saving time information: year mmddhh(start) mmddhh(end) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.5 | ColumnsnMspsTimezoneDSTRecurring | read-write | current | Shows and sets the recurring information of this entry. Null if it is not a recurring entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.6 | ColumnsnMspsTimezoneDSTRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62 | NodesnMspsEthernetIp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.1 | ScalarsnMspsEtherNetIPOperStatus | read-only | current | Current Mode of EtherNet/IP |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.2 | ScalarsnMspsEtherNetIPAdminStatus | read-write | current | Next Mode of EtherNet/IP after the next reboot takes place. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.6 | ScalarsnMspsEtherNetIPEncapsulationInactivityTimeout | read-write | current | Number of seconds of inactivity before TCP connection is closed |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.9 | ScalarsnMspsEtherNetIPHostName | read-write | current | The Host Name attribute contains the device's host name, which can be used for informational purposes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.15 | ScalarsnMspsEtherNetIPDlrRingport1 | read-write | current | Index 1. 0 if DLR is not supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.16 | ScalarsnMspsEtherNetIPDlrRingport2 | read-write | current | Index 2. 0 if DLR is not supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.17 | ScalarsnMspsEtherNetIPDlrRingVlanId | read-write | current | VlanId. 0 if DLR is not supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.20 | ScalarsnMspsEtherNetIPDlrEnable | read-write | current | This object informs whether the entry is active or inactive |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.22 | ScalarsnMspsEtherNetIPDlrDscpTagEnable | read-write | current | Enables or disables sending 802.1Q frames on CIP and IEEE 1588 messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.23 | ScalarsnMspsEtherNetIPDlrDscpUrgent | read-write | current | DSCP value for CIP transport class 0/1 Urgent priority messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.25 | ScalarsnMspsEtherNetIPDlrDscpScheduled | read-write | current | DSCP value for CIP transport class 0/1 Scheduled priority messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.27 | ScalarsnMspsEtherNetIPDlrDscpHigh | read-write | current | DSCP value for CIP transport class 0/1 High priority messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.28 | ScalarsnMspsEtherNetIPDlrDscpLow | read-write | current | DSCP value for CIP transport class 0/1 Low priority messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.30 | ScalarsnMspsEtherNetIPDlrDscpExplicit | read-write | current | DSCP value for CIP explicit messages (transport class 2/3 and UCMM) and all other EtherNet/IP encapsulation messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.33 | ScalarsnMspsEtherNetIPDlrSuperVisorIpAddress | read-only | current | The Supervisor IP address of DLR |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.35 | ScalarsnMspsEtherNetIPDlrSuperVisorMacAddress | read-only | current | The Supervisor MAC Address of DLR |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.38 | ScalarsnMspsEtherNetIPDlrRingTopology | read-only | current | This object informs whether the entry is ring or linear |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.40 | ScalarsnMspsEtherNetIPDlrRingState | read-only | current | This object informs whether the entry is normal or fault |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.43 | ScalarsnMspsEtherNetIPDlrNodeState | read-only | current | This object informs whether the entry is idle, fault or normal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.45 | ScalarsnMspsEtherNetIPDlrNetworkStatus | read-only | current | This object informs whether the entry is normal, ring fault, loop, partial fault or rapid fault restore |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.48 | ScalarsnMspsEtherNetIPDlrVlanId | read-only | current | DLR VLAN ID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.50 | ScalarsnMspsEtherNetIPDlrRingport1Status | read-only | current | Status of the DLR Ring Port 1 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.51 | ScalarsnMspsEtherNetIPDlrRingport2Status | read-only | current | Status of the DLR Ring Port 2 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.63 | NodesnMspsIpACD | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.63.1 | ScalarsnMspsIpACDModeStatus | read-write | current | This object specifies whether IPV4 Address Collision Detection is activated or not for all IP interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.63.2 | ScalarsnMspsIpACDDefendingMode | read-write | current | This object specifies defending mode of IPV4 Address Collision Detection for all IP interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65 | NodesnMspsIp6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1 | NodesnMspsIpIp6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1 | NodesnMspsIp6Scalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.1 | ScalarsnMspsIp6NdCacheMaxRetries | read-write | current | This object specifies the maximum number of retries that can be attempted upon resolving the 'physical' address of an IPv6 address during address resolution or… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.2 | ScalarsnMspsIp6PmtuConfigStatus | read-write | current | Flag to enable or disable Path MTU Discovery for the node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.3 | ScalarsnMspsIp6PmtuTimeOutInterval | read-write | current | The time in minutes after which the path MTU entry times out. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.4 | ScalarsnMspsIp6JumboEnable | read-write | current | Flag to enable or disable IPv6 Jumbogram facility for the node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.5 | ScalarsnMspsIp6NumOfSendJumbo | read-only | current | Number of IPv6 Jumbograms sent from the node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.6 | ScalarsnMspsIp6NumOfRecvJumbo | read-only | current | Number of IPv6 Jumbograms received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.7 | ScalarsnMspsIp6ErrJumbo | read-only | current | Number of IPv6 Error Jumbograms received or transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.8 | ScalarsnMspsIp6GlobalDebug | read-write | current | Enables the tracing in the selected submodule in IP6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - B… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.9 | ScalarsnMspsIp6MaxRouteEntries | read-write | current | Maximum Number of Route Entries that could be configured in the system. Minumum value is 5. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.10 | ScalarsnMspsIp6MaxLogicalIfaces | read-write | current | Maximum Number of configurable Logical IPv6 Interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.11 | ScalarsnMspsIp6MaxTunnelIfaces | read-write | current | Maximum Number of configurable Tunnel Interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.12 | ScalarsnMspsIp6MaxAddresses | read-write | current | Maximum Number of Configurable IPv6 Interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.13 | ScalarsnMspsIp6MaxFragReasmEntries | read-write | current | This object could be used for 2 purpose. 1. Maximum Number of IP6 datagrams awaiting reassembly. 2. Maximum Number of fragments that could be allowed in a sing… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.14 | ScalarsnMspsIp6Nd6MaxCacheEntries | read-write | current | Maximum Number of ND Cache Entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.15 | ScalarsnMspsIp6PmtuMaxDest | read-write | current | Maximum Number of PMTU Table Entries |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.16 | ScalarsnMspsIp6RFC5095Compatibility | read-write | current | When the IPv6 node is configured to be RFC5095 compatible, then it should treat Type 0 Routing Header as invalid routing header type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2 | NodesnMspsIp6Tables | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1 | TablesnMspsIp6IfTable | not-accessible | current | The IPv6 Interface table contains information on the entity's internetwork-layer interfaces on which IPv6. protocol is enabled. An IPv6 interface constitutes a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1 | RowsnMspsIp6IfEntry | not-accessible | current | An interface entry containing objects about a particular IPv6 interface. The entry is created or deleted from SNMP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.1 | ColumnsnMspsIp6IfIndex | not-accessible | current | A unique value identifying the particular IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.2 | ColumnsnMspsIp6IfType | read-only | current | The type of interface immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.3 | ColumnsnMspsIp6IfPortNum | read-only | current | This object identifies the 'interface' over which this network interface operates and is dependent on the value of snMspsIp6IfType. This object reflects the if… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.4 | ColumnsnMspsIp6IfCircuitNum | read-only | current | This object identifies the circuit over which this network interface operates and is dependent on the value of snMspsIp6IfType. If the data-link layer is Ether… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.5 | ColumnsnMspsIp6IfToken | read-write | current | The address token for this interface that is (at least) unique on the link this interface is attached to. This token can be specified only if the snMspsIp6IfTy… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.6 | ColumnsnMspsIp6IfAdminStatus | read-write | current | Indicates whether IPv6 is enabled/disabled on this interface. When lower layer indicates the creation of the interface, an entry will be create in IPv6 interfa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.7 | ColumnsnMspsIp6IfOperStatus | read-only | current | The operational state of interface. It is up(1) if the snMspsIp6IfAdminStatus is 'up' and the layer below the network layer is also operational. Otherwise it i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.8 | ColumnsnMspsIp6IfRouterAdvStatus | read-write | current | The router advertisement status on this interface. When the object is set to enabled(1), router advertisements can be allowed on the IPv6 interface. Otherwise,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.9 | ColumnsnMspsIp6IfRouterAdvFlags | read-write | current | This object specifies the bits to be set in the router advertisements sent by this entity on this interface. M-bit set in the router advertisement indicates ho… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.10 | ColumnsnMspsIp6IfHopLimit | read-write | current | The Hop Limit value to be placed in the router advertisements sent on this IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.11 | ColumnsnMspsIp6IfDefRouterTime | read-write | current | The default router time to be indicated in the router advertisements sent on this IPv6 interface. This defines the time in seconds for which this entity acts a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.12 | ColumnsnMspsIp6IfReachableTime | read-write | current | The reachable time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds that… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.13 | ColumnsnMspsIp6IfRetransmitTime | read-write | current | The retransmit time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds bet… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.14 | ColumnsnMspsIp6IfDelayProbeTime | read-write | current | The time in seconds to delay before starting unreachability probing of neighbor entries which are stale. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.15 | ColumnsnMspsIp6IfPrefixAdvStatus | read-write | current | The prefix advertisement status on this IPv6 interface. Object value enabled(1) allows the configured prefixes to be advertised in router advertisements. Other… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.16 | ColumnsnMspsIp6IfMinRouterAdvTime | read-write | current | The minimum time in seconds allowed between sending unsolicited router advertisements.The default value is one-third the default value of snMspsIp6IfMaxRouterA… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.17 | ColumnsnMspsIp6IfMaxRouterAdvTime | read-write | current | The maximum time in seconds between sending unsolicited router advertisements. Router advertisements are sent periodically at a random interval between the val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.18 | ColumnsnMspsIp6IfDADRetries | read-write | current | The maximum number of neighbor solicitations sent for the purpose of duplicate address detection on a tentative address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.19 | ColumnsnMspsIp6IfForwarding | read-write | current | This MIB object is used to configure IPv6 routing and forwarding on this interface. The default value is set to enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.20 | ColumnsnMspsIp6IfRoutingStatus | read-only | current | This MIB object indicates the current routing status on this interface. This is based on the global IPv6 forwarding status of the mib object 'ipv6Forwarding'. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.21 | ColumnsnMspsIp6IfIcmpErrInterval | read-write | current | Time interval between tokens being added to the ICMPv6 token bucket. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.22 | ColumnsnMspsIp6IfIcmpTokenBucketSize | read-write | current | Maximum number of tokens stored in the ICMPv6 bucket |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.23 | ColumnsnMspsIp6IfDestUnreachableMsg | read-write | current | Indicates whether ICMPv6 destination unreachable messages are enabled/disabled on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.24 | ColumnsnMspsIp6IfAddressAutoConfStatus | read-write | current | Indicates the status of stateless address auto-configuration (SLAAC) on this interface, i.e. whether to use prefix information from Router Advertisement packet… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2 | TablesnMspsIp6IfStatsTable | not-accessible | current | IPv6 interface traffic statistics |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1 | RowsnMspsIp6IfStatsEntry | not-accessible | current | An interface statistics entry containing objects at a particular IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.1 | ColumnsnMspsIp6IfStatsIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface for which this statistics are maintained. The interface identified by a particular value of this i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.2 | ColumnsnMspsIp6IfStatsInReceives | read-only | current | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.3 | ColumnsnMspsIp6IfStatsInHdrErrors | read-only | current | The number of input datagrams discarded due to errors in their IPv6 headers, including version number mismatch, other format errors, hop count exceeded, errors… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.4 | ColumnsnMspsIp6IfStatsTooBigErrors | read-only | current | The number of datagrams that could not be forwarded because their size exceeded the Path MTU |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.5 | ColumnsnMspsIp6IfStatsInAddrErrors | read-only | current | The number of input datagrams discarded because the IPv6 address in their IPv6 header's destination field was not a valid address to be received at this entity… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.6 | ColumnsnMspsIp6IfStatsForwDatagrams | read-only | current | The number of input datagrams for which this entity was not their final IPv6 destination, as a result of which an attempt was made to find a route to forward t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.7 | ColumnsnMspsIp6IfStatsInUnknownProtos | read-only | current | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.8 | ColumnsnMspsIp6IfStatsInDiscards | read-only | current | The number of input IPv6 datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of bu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.9 | ColumnsnMspsIp6IfStatsInDelivers | read-only | current | The total number of input datagrams successfully delivered to IPv6 user-protocols (including ICMP). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.10 | ColumnsnMspsIp6IfStatsOutRequests | read-only | current | The total number of IPv6 datagrams which local IPv6 user-protocols (including ICMP) supplied to IPv6 in requests for transmission. Note that this counter does … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.11 | ColumnsnMspsIp6IfStatsOutDiscards | read-only | current | The number of output IPv6 datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., fo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.12 | ColumnsnMspsIp6IfStatsOutNoRoutes | read-only | current | The number of IPv6 datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets count… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.13 | ColumnsnMspsIp6IfStatsReasmReqds | read-only | current | The number of IPv6 fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.14 | ColumnsnMspsIp6IfStatsReasmOKs | read-only | current | The number of IPv6 datagrams successfully reassembled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.15 | ColumnsnMspsIp6IfStatsReasmFails | read-only | current | The number of failures detected by the IPv6 re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.16 | ColumnsnMspsIp6IfStatsFragOKs | read-only | current | The number of IPv6 datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.17 | ColumnsnMspsIp6IfStatsFragFails | read-only | current | The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this entity but could not be. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.18 | ColumnsnMspsIp6IfStatsFragCreates | read-only | current | The number of IPv6 datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.19 | ColumnsnMspsIp6IfStatsInMcastPkts | read-only | current | The number of multicast packets received by the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.20 | ColumnsnMspsIp6IfStatsOutMcastPkts | read-only | current | The number of multicast packets transmitted by the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.21 | ColumnsnMspsIp6IfStatsInTruncatedPkts | read-only | current | The number of input datagrams discarded because datagram frame didn't carry enough data |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.22 | ColumnsnMspsIp6IfStatsInRouterSols | read-only | current | The number of ICMP Router Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.23 | ColumnsnMspsIp6IfStatsInRouterAdvs | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.24 | ColumnsnMspsIp6IfStatsInNeighSols | read-only | current | The number of ICMP Neighbor Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.25 | ColumnsnMspsIp6IfStatsInNeighAdvs | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.26 | ColumnsnMspsIp6IfStatsInRedirects | read-only | current | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.27 | ColumnsnMspsIp6IfStatsOutRouterSols | read-only | current | The number of ICMP Router Solicit messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.28 | ColumnsnMspsIp6IfStatsOutRouterAdvs | read-only | current | The number of ICMP Router Advertisement messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.29 | ColumnsnMspsIp6IfStatsOutNeighSols | read-only | current | The number of ICMP Neighbor Solicitation messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.30 | ColumnsnMspsIp6IfStatsOutNeighAdvs | read-only | current | The number of ICMP Neighbor Advertisement messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.31 | ColumnsnMspsIp6IfStatsOutRedirects | read-only | current | The number of Redirect messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.32 | ColumnsnMspsIp6IfStatsLastRouterAdvTime | read-only | current | The time at which the last Periodic router advertisement was sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.33 | ColumnsnMspsIp6IfStatsNextRouterAdvTime | read-only | current | The time at which the next Periodic router advertisement is scheduled to be sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.34 | ColumnsnMspsIp6IfStatsIcmp6ErrRateLmtd | read-only | current | No of rate limited ICMP6 error messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3 | TablesnMspsIp6PrefixTable | not-accessible | current | The table containing entity's IPv6 address prefix information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1 | RowsnMspsIp6PrefixEntry | not-accessible | current | The entry in the IPv6 Address Prefix Table which defines a prefix to be advertised in the route advertisement message send on an IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.1 | ColumnsnMspsIp6PrefixIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this IPv6 address prefix entry is to be advertised. The interface identified by a particu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.2 | ColumnsnMspsIp6PrefixAddress | not-accessible | current | The IPv6 address prefix to which this entry's prefix information pertains. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.3 | ColumnsnMspsIp6PrefixAddrLen | not-accessible | current | The length of the prefix (in bits) associated with the IPv6 address prefix of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.4 | ColumnsnMspsIp6PrefixProfileIndex | read-write | current | Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this prefix. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.5 | ColumnsnMspsIp6PrefixAdminStatus | read-create | current | Indicates the administrative status of the prefix. CreateAndGo and NotInService are not supported. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.6 | ColumnsnMspsIp6SupportEmbeddedRp | read-write | current | Flag to control the usage of associated IPv6 Prefix address as a valid embedded-RP prefix on specified interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4 | TablesnMspsIp6AddrTable | not-accessible | current | The table containing entity's IPv6 addressing information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1 | RowsnMspsIp6AddrEntry | not-accessible | current | The entry in the IPv6 Address Table which defines a unicast, anycast or link-local address on an IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.1 | ColumnsnMspsIp6AddrIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this IPv6 address entry exists. The interface identified by a particular value of this in… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.2 | ColumnsnMspsIp6AddrAddress | not-accessible | current | The IPv6 address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.3 | ColumnsnMspsIp6AddrPrefixLen | not-accessible | current | The length of the prefix (in bits) associated with the IPv6 address of this entry. For a link-local address, the prefix is always start with '0xfe80' and the p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.4 | ColumnsnMspsIp6AddrAdminStatus | read-create | current | Indicates the desired status of the address. Also a creation of an address can trigger IPv6 to be enabled over the interface. Similarly deletion of all the add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.5 | ColumnsnMspsIp6AddrType | read-write | current | Indicates whether the address is a unicast, anycast or link-local address. Syntactically there is no difference between a unicast address and a anycast address… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.6 | ColumnsnMspsIp6AddrProfIndex | read-write | current | Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this address. For a link-local… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.7 | ColumnsnMspsIp6AddrOperStatus | read-only | current | Indicates the operational status of the address. A status of failed(4) indicates that a duplicate address has been detected on this IPv6 interface. On interfac… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.8 | ColumnsnMspsIp6AddrScope | read-only | current | Scope is a 4-bit value that describes the scope of an IPV6 address.An unicast address can possibly have 2 scopes (Linklocal and Global) only. A multicast addre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5 | TablesnMspsIp6AddrProfileTable | not-accessible | current | The table containing information for an address or set of addresses of the entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1 | RowsnMspsIp6AddrProfileEntry | not-accessible | current | The entry in the IPv6 Address Profile Table which contains parameters related to the advertisement of address prefixes. One or more IPv6 addresses refer to thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.1 | ColumnsnMspsIp6AddrProfileIndex | not-accessible | current | A unique value identifying the particular IPv6 Address profile entry. This is referred by snMspsIp6AddrProfIndex of IPv6 Address Table. The index 0 is created … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.2 | ColumnsnMspsIp6AddrProfileStatus | read-write | current | Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.3 | ColumnsnMspsIp6AddrProfilePrefixAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised in router advertisements sent b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.4 | ColumnsnMspsIp6AddrProfileOnLinkAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with on-link flag set in the ro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.5 | ColumnsnMspsIp6AddrProfileAutoConfAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with autonomous address configu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.6 | ColumnsnMspsIp6AddrProfilePreferredTime | read-write | current | This object specifies the preferred lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in route… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.7 | ColumnsnMspsIp6AddrProfileValidTime | read-write | current | This object specifies the valid lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in router ad… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.8 | ColumnsnMspsIp6AddrProfileValidLifeTimeFlag | read-write | current | By setting this flag to fixed (1),the router advertisement Valid life time value is set to fixed and by setting to variable(2), the router advertisement Valid … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.9 | ColumnsnMspsIp6AddrProfilePreferredLifeTimeFlag | read-write | current | By setting this flag to fixed (1),the router advertisement Preferred life time value is set to fixed and by setting to variable(2), the router advertisement pr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6 | TablesnMspsIp6PmtuTable | not-accessible | current | IPv6 Path MTU table. This table contains an entry for a specific path traversed by packets exchanged between the source and destination nodes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1 | RowsnMspsIp6PmtuEntry | not-accessible | current | A Path MTU entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.1 | ColumnsnMspsIp6PmtuDest | not-accessible | current | The destination IPv6 address of the packets to be exchanged. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.2 | ColumnsnMspsIp6Pmtu | read-write | current | Indicates the path MTU value for the path. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.3 | ColumnsnMspsIp6PmtuTimeStamp | read-only | current | Indicates the entry created time in the PMTU table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.4 | ColumnsnMspsIp6PmtuAdminStatus | read-write | current | The desired status of the PmtuTable. This variable has to be made valid(1) for creating a entry in the PmtuTable. If set to invalid(2), the entry is deleted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7 | TablesnMspsIp6NdLanCacheTable | not-accessible | current | The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses on Ethernet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1 | RowsnMspsIp6NdLanCacheEntry | not-accessible | current | Each entry contains one IPv6 address to `physical' address equivalence. Entries are created dynamically upon address resolution or statically from SNMP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.1 | ColumnsnMspsIp6NdLanCacheIfIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this snMspsIp6NdLanCache entry exists. The interface identified by a particular value of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.2 | ColumnsnMspsIp6NdLanCacheIPv6Addr | not-accessible | current | The IPv6 Address corresponding to the `physical' address on Ethernet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.3 | ColumnsnMspsIp6NdLanCacheStatus | read-write | current | Setting this object to the value invalid(2) effects in invalidating the corresponding entry in the snMspsIp6NdLanCacheTable. Otherwise, the entry remains valid. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.4 | ColumnsnMspsIp6NdLanCachePhysAddr | read-write | current | The `physical' address on Ethernet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.5 | ColumnsnMspsIp6NdLanCacheState | read-only | current | The reachability state of NdLanCacheEntry. Upon creation of an entry from SNMP, this object takes the value as 'static'. Otherwise takes the value that corresp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.6 | ColumnsnMspsIp6NdLanCacheUseTime | read-only | current | The value of sysUpTime at the time the entry was consulted upon IPv6 packet forwarding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8 | TablesnMspsIp6NdWanCacheTable | not-accessible | current | The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses on NBMA interface. The 'physical address' actually refers to the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1 | RowsnMspsIp6NdWanCacheEntry | not-accessible | current | Each entry contains one IPv6 address to `physical' address equivalence. Entries are created dynamically upon reception of IPv6 packet from an on-link source or… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.1 | ColumnsnMspsIp6NdWanCacheIfIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this snMspsIp6NdWanCache entry exists. The interface identified by a particular value of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.2 | ColumnsnMspsIp6NdWanCacheIPv6Addr | not-accessible | current | The IPv6 Address of the on-link node on this NBMA interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.3 | ColumnsnMspsIp6NdWanCacheStatus | read-write | current | Setting this object to the value 'invalid(2)' effects in invalidating the corresponding entry in the snMspsIp6NdWanCacheTable. Otherwise, the entry remains val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.4 | ColumnsnMspsIp6NdWanCacheState | read-only | current | The reachability state of NdWanCacheEntry. Upon creation of an entry from SNMP, this object takes the value as 'static'. Otherwise takes the value as 'reachabl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.5 | ColumnsnMspsIp6NdWanCacheUseTime | read-only | current | The value of sysUpTime at the time the entry was consulted upon IPv6 packet forwarding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12 | TablesnMspsIp6PingTable | not-accessible | current | This entity's IPv6 Ping Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1 | RowsnMspsIp6PingEntry | not-accessible | current | Contains the information about a particular IPv6 Ping operation. An entry is created/deleted from SNMP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.1 | ColumnsnMspsIp6PingIndex | not-accessible | current | A unique value identifying the particular IPv6 Ping entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.2 | ColumnsnMspsIp6PingDest | read-write | current | The IPv6 address of the destination to be pinged. This should be a unicast or link-local address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.3 | ColumnsnMspsIp6PingIfIndex | read-write | current | The index value which uniquely identifies the IPv6 interface on which this Ping is to be sent. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.4 | ColumnsnMspsIp6PingAdminStatus | read-write | current | The desired status for the ping operation. This variable has to be made up(1) for starting the ping operation. If set to down(2), the ping is stopped but the s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.5 | ColumnsnMspsIp6PingInterval | read-write | current | The time interval in seconds between successive pings sent to the destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.6 | ColumnsnMspsIp6PingRcvTimeout | read-write | current | The time in seconds after which this entity times out waiting for a particular ping response. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.7 | ColumnsnMspsIp6PingTries | read-write | current | The number of times the destination is to be pinged. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.8 | ColumnsnMspsIp6PingSize | read-write | current | The size of the data portion of the Ping packet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.9 | ColumnsnMspsIp6PingSentCount | read-only | current | Total number of packets sent to destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.10 | ColumnsnMspsIp6PingAverageTime | read-only | current | The average value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.11 | ColumnsnMspsIp6PingMaxTime | read-only | current | The maximum value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.12 | ColumnsnMspsIp6PingMinTime | read-only | current | The minimum value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.13 | ColumnsnMspsIp6PingOperStatus | read-only | current | The current status of this ping operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.14 | ColumnsnMspsIp6PingSuccesses | read-only | current | The number of ping responses received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.15 | ColumnsnMspsIp6PingPercentageLoss | read-only | current | Percentage of lost packets for which no responses were received till timeout. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.16 | ColumnsnMspsIp6PingData | read-write | current | Data that should be sent in the Ping message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.17 | ColumnsnMspsIp6PingSrcAddr | read-write | current | Source address to be used for the ping |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.18 | ColumnsnMspsIp6PingZoneId | read-write | current | Zone-Id shoule be able to identify a particular zone of the address's scope. This Zone id applies to all kinds of unicast and multicast addresses of non-global… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.19 | ColumnsnMspsIp6PingDestAddrType | read-write | current | The address type of the destination to be pinged. other - unicast or linklocal address anycast - anycast address .An IPv6 packet cannot have anycast address as… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13 | TablesnMspsIp6NDProxyListTable | not-accessible | current | Configurable list of IPv6 Addresses for which Proxy Neighbor Discovery is desired. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13.1 | RowsnMspsIp6NDProxyListEntry | not-accessible | current | An entry in the ND Proxy Table. Each entry specifies the IPv6 address for which proxy feature is needed, and the adminstatus for the row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13.1.1 | ColumnsnMspsIp6NdProxyAddr | not-accessible | current | IPv6 address for Proxy ND. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13.1.2 | ColumnsnMspsIp6NdProxyAdminStatus | read-write | current | The desired state of the ND Proxy list entry. When set to create(4) the IPv6 interface is created and invalid(4) to delete the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14 | TablesnMspsIp6AddrSelPolicyTable | not-accessible | current | This table is used for default address selection in IPv6. This table is used to configure the Precedence and Label associated with a source/destination address… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1 | RowsnMspsIp6AddrSelPolicyEntry | not-accessible | current | This table entry is used to configure the following parameters for an IPv6 source/destination address - Prefix, PrefixLen,Ifindex,Preference,Label,Address Type… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.1 | ColumnsnMspsIp6AddrSelPolicyPrefix | not-accessible | current | The IPv6 Address/Prefix for which the policy needs to be configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.2 | ColumnsnMspsIp6AddrSelPolicyPrefixLen | not-accessible | current | The Prefix length associated with the IPV6 address identified by 'snMspsIp6AddrSelPolicyPrefix. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.3 | ColumnsnMspsIp6AddrSelPolicyIfIndex | not-accessible | current | The index value that uniquely identifies the interface to which this entry is applicable. A value of 0 indicates that the associated address is reachable via a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.4 | ColumnsnMspsIp6AddrSelPolicyScope | read-only | current | This MIB object identifies the scope of the IPv6 address. This can take the following values based on whether the address is unicast/anycast or multicast. 0 re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.5 | ColumnsnMspsIp6AddrSelPolicyPrecedence | read-write | current | The precedence value associated with the address in the policy table. This value is applicable for destination addresses.Higher the value, higher the precedenc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.6 | ColumnsnMspsIp6AddrSelPolicyLabel | read-write | current | The label value associated with the address in the policy table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.7 | ColumnsnMspsIp6AddrSelPolicyAddrType | read-write | current | This MIB object is used to configure an address as unicast/anycast/multicast, provided the IPv6 address meets the validation criteria for the address type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.8 | ColumnsnMspsIp6AddrSelPolicyIsPublicAddr | read-only | current | This MIB object indicates whether the address configured in the policy table is a private or public address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.9 | ColumnsnMspsIp6AddrSelPolicyIsSelfAddr | read-only | current | This MIB object indicates whether the given address is configured on the associated interface and represents a self-address. The associated MIB object snMspsIp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.10 | ColumnsnMspsIp6AddrSelPolicyReachabilityStatus | read-only | current | This MIB object indicates whether the address configured in the Policy Table is reachable/unreachable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.11 | ColumnsnMspsIp6AddrSelPolicyConfigStatus | read-only | current | This MIB object indicates whether the associated entry in the Policy table is created automatically or via the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.12 | ColumnsnMspsIp6AddrSelPolicyRowStatus | read-create | current | Administrative Status of the policy table. This object is used to create or delete the entry in the policy table. The following values are not supported for th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15 | TablesnMspsIp6IfScopeZoneMapTable | not-accessible | current | A zone index identifies an instance of a specific scope uniquely within the system.The zone index is used to associate unambiguously an IPv6 address to a speci… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1 | RowsnMspsIp6IfScopeZoneMapEntry | not-accessible | current | Each entry contains the list of scope identifiers on a given interface. Its a unique value assigned for each scope on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.1 | ColumnsnMspsIp6ScopeZoneIndexIfIndex | not-accessible | current | The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.2 | ColumnsnMspsIp6ScopeZoneIndexInterfaceLocal | read-write | current | The zone index for the Interface local scope on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.3 | ColumnsnMspsIp6ScopeZoneIndexLinkLocal | read-write | current | The zone index for the link-local scope on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexLinkLocal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.4 | ColumnsnMspsIp6ScopeZoneIndex3 | read-write | current | The zone index for scope 3 on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex3 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.5 | ColumnsnMspsIp6ScopeZoneIndexAdminLocal | read-write | current | The zone index for the admin-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexAdminLocal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.6 | ColumnsnMspsIp6ScopeZoneIndexSiteLocal | read-write | current | The zone index for the site-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexSiteLocal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.7 | ColumnsnMspsIp6ScopeZoneIndex6 | read-write | current | The zone index for scope 6 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex6 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.8 | ColumnsnMspsIp6ScopeZoneIndex7 | read-write | current | The zone index for scope 7 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex7 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.9 | ColumnsnMspsIp6ScopeZoneIndexOrganizationLocal | read-write | current | The zone index for the organization-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexOrganiza… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.10 | ColumnsnMspsIp6ScopeZoneIndex9 | read-write | current | The zone index for scope 9 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex9 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.11 | ColumnsnMspsIp6ScopeZoneIndexA | read-write | current | The zone index for scope A on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexA |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.12 | ColumnsnMspsIp6ScopeZoneIndexB | read-write | current | The zone index for scope B on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexB |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.13 | ColumnsnMspsIp6ScopeZoneIndexC | read-write | current | The zone index for scope C on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexC |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.14 | ColumnsnMspsIp6ScopeZoneIndexD | read-write | current | The zone index for scope D on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexD |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.15 | ColumnsnMspsIp6ScopeZoneIndexE | read-write | current | The zone index for scope E on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.16 | ColumnsnMspsIp6IfScopeZoneCreationStatus | read-only | current | Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.17 | ColumnsnMspsIp6IfScopeZoneRowStatus | read-create | current | The rowstatus of the scope-zone index table, used in accordance to creation and deletion of scope-zones.To create a row in this table manager sets this object … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16 | TablesnMspsIp6ScopeZoneTable | not-accessible | current | The table is used to map each scope-zone index with the interface to which it has been associated. This table is indeed used while forwarding packets to find o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1 | RowsnMspsIp6ScopeZoneEntry | not-accessible | current | An entry in the Scope-Zone Index Member Table.Each entry specifies the interface indices associated with a particular scope-zone index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.1 | ColumnsnMspsIp6ScopeZoneName | not-accessible | current | Displays the scope zone name value(i.e linklocal1, interfacelocal2) for the scope-zone index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.2 | ColumnsnMspsIp6ScopeZoneIndex | read-only | current | A unique value for each scope on an interface. It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.3 | ColumnsnMspsIp6ScopeZoneCreationStatus | read-only | current | Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.4 | ColumnsnMspsIp6ScopeZoneInterfaceList | read-only | current | This MIB object displays all the interfaces that are part of/members of this scope-zone index. These interfaces have the corresponding bit set in the octetlist. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.5 | ColumnsnMspsIp6IsDefaultScopeZone | read-write | current | yes- indicates that zone is default zone for the associated scope No - indicates that zone is not the default zone for the associated scope |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2 | NodesnMspsIp6Icmp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.1 | ScalarsnMspsIp6IcmpInMsgs | read-only | current | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by snMspsIp6IcmpInErrors. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.2 | ScalarsnMspsIp6IcmpInErrors | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.3 | ScalarsnMspsIp6IcmpInDestUnreachs | read-only | current | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.4 | ScalarsnMspsIp6IcmpInTimeExcds | read-only | current | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.5 | ScalarsnMspsIp6IcmpInParmProbs | read-only | current | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.6 | ScalarsnMspsIp6IcmpInPktTooBigs | read-only | current | The number of ICMP Packet Too Big messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.7 | ScalarsnMspsIp6IcmpInEchos | read-only | current | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.8 | ScalarsnMspsIp6IcmpInEchoReps | read-only | current | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.9 | ScalarsnMspsIp6IcmpInRouterSolicits | read-only | current | The number of ICMP Router Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.10 | ScalarsnMspsIp6IcmpInRouterAdvertisements | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.11 | ScalarsnMspsIp6IcmpInNeighborSolicits | read-only | current | The number of ICMP Neighbor Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.12 | ScalarsnMspsIp6IcmpInNeighborAdvertisements | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.13 | ScalarsnMspsIp6IcmpInRedirects | read-only | current | The number of Redirect messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.14 | ScalarsnMspsIp6IcmpInAdminProhib | read-only | current | Number of ICMP destination unreachable/communication administratively prohibited messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.15 | ScalarsnMspsIp6IcmpOutMsgs | read-only | current | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.16 | ScalarsnMspsIp6IcmpOutErrors | read-only | current | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.17 | ScalarsnMspsIp6IcmpOutDestUnreachs | read-only | current | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.18 | ScalarsnMspsIp6IcmpOutTimeExcds | read-only | current | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.19 | ScalarsnMspsIp6IcmpOutParmProbs | read-only | current | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.20 | ScalarsnMspsIp6IcmpOutPktTooBigs | read-only | current | The number of ICMP Packet Too Big messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.21 | ScalarsnMspsIp6IcmpOutEchos | read-only | current | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.22 | ScalarsnMspsIp6IcmpOutEchoReps | read-only | current | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.23 | ScalarsnMspsIp6IcmpOutRouterSolicits | read-only | current | The number of ICMP Router Solicitation messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.24 | ScalarsnMspsIp6IcmpOutRouterAdvertisements | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.25 | ScalarsnMspsIp6IcmpOutNeighborSolicits | read-only | current | The number of ICMP Neighbor Solicitation messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.26 | ScalarsnMspsIp6IcmpOutNeighborAdvertisements | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.27 | ScalarsnMspsIp6IcmpOutRedirects | read-only | current | The number of Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.28 | ScalarsnMspsIp6IcmpOutAdminProhib | read-only | current | Number of ICMP destination unreachable/ communication administratively prohibited messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.29 | ScalarsnMspsIp6IcmpInBadCode | read-only | current | Number of received ICMP messages having unrecognized type of message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.30 | ScalarsnMspsIp6IcmpInNARouterFlagSet | read-only | current | The number of ICMP Neighbor Advertisement received with Router Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.31 | ScalarsnMspsIp6IcmpInNASolicitedFlagSet | read-only | current | The number of ICMP Neighbor Advertisement received with Solicited Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.32 | ScalarsnMspsIp6IcmpInNAOverrideFlagSet | read-only | current | The number of ICMP Neighbor Advertisement received with Override Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.33 | ScalarsnMspsIp6IcmpOutNARouterFlagSet | read-only | current | The number of ICMP Neighbor Advertisement sent with Router Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.34 | ScalarsnMspsIp6IcmpOutNASolicitedFlagSet | read-only | current | The number of ICMP Neighbor Advertisement sent with Solicited Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.35 | ScalarsnMspsIp6IcmpOutNAOverrideFlagSet | read-only | current | The number of ICMP Neighbor Advertisement sent with Override Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3 | NodesnMspsIp6Udp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1 | NodesnMspsIp6UdpScalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.1 | ScalarsnMspsIp6UdpInDatagrams | read-only | current | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.2 | ScalarsnMspsIp6UdpNoPorts | read-only | current | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.3 | ScalarsnMspsIp6UdpInErrors | read-only | current | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.4 | ScalarsnMspsIp6UdpOutDatagrams | read-only | current | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.5 | NodesnMspsIp6Tunnel | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6 | NodesnMspsIp6Route | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1 | TablesnMspsIp6RouteTable | not-accessible | current | This table contains dynamic routes that are learnt through dynamic routing protocol as well as local routes derived from configured address prefixes and static… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1 | RowsnMspsIp6RouteEntry | not-accessible | current | An entry in the IPv6 Routing Table. An entry can be created by means of the routing protocol, derived from configured address prefixes as well as statically co… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.1 | ColumnsnMspsIp6RouteDest | not-accessible | current | The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.2 | ColumnsnMspsIp6RoutePfxLength | not-accessible | current | Indicates the prefix length of the destination address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.3 | ColumnsnMspsIp6RouteProtocol | not-accessible | current | The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.4 | ColumnsnMspsIp6RouteNextHop | not-accessible | current | Next hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.5 | ColumnsnMspsIp6RouteIfIndex | read-write | current | The index value which uniquely identifies the interface through which the next hop of this route should be reached. The interface identified by a particular va… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.6 | ColumnsnMspsIp6RouteMetric | read-write | current | The routing metric associated with this route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.7 | ColumnsnMspsIp6RouteType | read-write | current | The type of route. Note that 'local(3)' refers to a route for which the next hop is the final destination; 'remote(4)' refers to a route for which the next hop… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.8 | ColumnsnMspsIp6RouteTag | read-write | current | This object specifies whether this route is an internal or external route. Value 0 represent routes are internal to the routing domain and Value > 0 represent … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.9 | ColumnsnMspsIp6RouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. For statically configured routes and locally derived routes, thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.10 | ColumnsnMspsIp6RouteAdminStatus | read-create | current | Administrative Status of the route. This object is used to create or delete the route entry. The snMspsIp6RouteIfIndex needs to be set, before the route entry … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.11 | ColumnsnMspsIp6RouteAddrType | read-write | current | Indicates whether the destination address in the route entry is unicast or anycast. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2 | TablesnMspsIp6PrefTable | not-accessible | current | The IPv6 Preference table contains information on the Preference Value for each supported protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2.1 | RowsnMspsIp6PrefEntry | not-accessible | current | An entry containing objects about a particular protocols preference value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2.1.1 | ColumnsnMspsIp6Protocol | not-accessible | current | A unique value identifying the protocol whose preference value needs to be processed. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2.1.2 | ColumnsnMspsIp6Preference | read-write | current | Preference of the route learned by a particular protocol. This value is used while choosing the best path. Lesser the value, highest is the preference. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71 | NodesnMspsCert | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1 | IdentitysnMspsCertObjects | current | The MIB objects in this group define the Management Information Base for X509 certificates. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1 | TablesnMspsCertTable | not-accessible | current | The table contains the last authentication events that occurred in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1 | RowsnMspsCertEntry | not-accessible | current | The description of an authentication event that occurred in the system, and was stored in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.1 | ColumnsnMspsCertIndex | not-accessible | current | This is a local variable. It is written by the local management entity. SNMP Index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.2 | ColumnsnMspsCertType | read-only | current | This is a local variable. It is written by the local management entity. The type of this Certificate. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.3 | ColumnsnMspsCertAdminState | read-only | current | This is a local variable. It is written by the local management entity. Temporarily cease operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.4 | ColumnsnMspsCertOperState | read-only | current | This is a ? variable. It is written by the local management entity. CERT state as determined by the. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.5 | ColumnsnMspsCertSerial | read-only | current | This is a local variable. It is written by the local management entity. Serial number of the certificate. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.6 | ColumnsnMspsCertSubjectDN | read-only | current | This is a local variable. It is written by the local management entity. Distinguished Name of the certificate owner. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.7 | ColumnsnMspsCertIssuerDN | read-only | current | This is a local variable. It is written by the local management entity. Distinguished Name of the certificate issuer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.8 | ColumnsnMspsCertIssueDate | read-only | current | This is a local variable. It is written by the local management entity. The date of issue before which the certificate is not valid. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.9 | ColumnsnMspsCertExpiryDate | read-only | current | This is a local variable. It is written by the local management entity. The date of expiry after which the certificate is not valid. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.10 | ColumnsnMspsCertCryptoAlg | read-only | current | This is a local variable. It is written by the local management entity. Filename of the Cert File. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.11 | ColumnsnMspsCertSelfSigned | read-only | current | This is a local variable. It is written by the local management entity. Whether the cert if self-signed, or signed by a CA. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.12 | ColumnsnMspsCertAuthKeyId | read-only | current | This is a local variable. It is written by the local management entity. AKI. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.13 | ColumnsnMspsCertSubjKeyId | read-only | current | This is a local variable. It is written by the local management entity. SKI. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.14 | ColumnsnMspsCertSubjKey | read-only | current | This is a local variable. It is written by the local management entity. Filename of the Cert File. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.15 | ColumnsnMspsCertKeyId | read-only | current | This is a local variable. It is written by the local management entity. Filename of the Cert File. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.16 | ColumnsnMspsCertDelete | read-write | current | This is a local variable. It is written by the local management entity. Delete (Set the value to 2 to invoke the deletion of this Certificate). A certificate's… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.18 | ColumnsnMspsCertAltName | read-only | current | This is a local variable. It is written by the local management entity. Alternative name of the certificate |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.19 | ColumnsnMspsCertFilename | read-only | current | This is a local variable. It is written by the local management entity. Filename of the Cert File. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.20 | ColumnsnMspsCertKeyFilename | read-only | current | This is a local variable. It is written by the local management entity. Filename of the Cert File. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.21 | ColumnsnMspsCertKeyUsage | read-only | current | This is a local variable. It is written by the local management entity. Key Usage of the Cert File. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.1.1.22 | ColumnsnMspsCertExtendedKeyUsage | read-only | current | This is a local variable. It is written by the local management entity. Extended Key Usage of the Cert File. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.2 | TablesnMspsCaCertTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.2.1 | RowsnMspsCaCertEntry | not-accessible | current | The agent instantiates a conceptural row for each CA certificate, i.e. the snMspsCertType object returns a value of typeCACert(1) for the requested snMspsCertI… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.2.1.1 | ColumnsnMspsCaCertCrlUri1st | read-write | current | This is a control variable. It is written by the external management entity. The attribute defines a Certificate Revocation List (CRL) Distribution Point (ldap… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.2.1.3 | ColumnsnMspsCaCertCrlUri2nd | read-write | current | This is a control variable. It is written by the external management entity. The attribute defines defines an alternative CRL distribution point (ldap,http,fil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.5 | TablesnMspsCertKeyEncTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.5.1 | RowsnMspsCertKeyEncEntry | not-accessible | current | The agent instantiates a conceptural row for each keyfile, which need entering passphrase before usage. The snMspsCertType object returns a value of typeKeyFil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.71.1.5.1.3 | ColumnsnMspsCertKeyEncPassphrase | read-write | current | This is a control variable. It is written by the external management entity. Passphrase, which is used with encrypted Keyfile |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74 | NodesnMspsFirewallNat | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1 | IdentitysnMspsFirewallNatObjects | current | The MIB objects in this group define the Management Information Base of the nat implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1 | IdentitysnMspsFirewallNatGlobal | current | The objects in this group define the management attributes of the nat implementation with systemic scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.1 | IdentitysnMspsFirewallNatIdleTimeout | current | The objects in this group define idle timeouts for nat'd connections. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.1.1 | ScalarsnMspsFirewallNatIdleTimeoutTcp | read-write | current | Nat Idle timeout for udp packages in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.1.2 | ScalarsnMspsFirewallNatIdleTimeoutUdp | read-write | current | Nat Idle timeout for udp packages in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.1.3 | ScalarsnMspsFirewallNatIdleTimeoutIcmp | read-write | current | Nat Idle timeout for icmp packages in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.4 | IdentitysnMspsFirewallNatAlias | current | The objects in this group define NAT alias confiurations. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.4.1 | ScalarsnMspsFirewallNatAliasAnnounceAdminStatus | read-write | current | Announce alias IPv4 addresses via gratuitous arp. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.4.4 | ScalarsnMspsFirewallNatAliasAnnounceRateLimitation | read-write | current | Nat alias annouce limitation annouce per second. 0 means no limitation |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.7 | IdentitysnMspsFirewallNatProfinet | current | The objects in this group define NAT PROFINET confiurations. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.7.5 | ScalarsnMspsFirewallNatProfinetTransparentMode | read-write | current | If enabled, PROFINET frames from corresponding station will be forwarded between Profinet Transparent VLAN and Masqueraded VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.7.7 | ScalarsnMspsFirewallNatProfinetNameOfStation | read-write | current | List of corresponding PROFINET station names, which will be considered if snMspsFirewallNatProfinetTransparentMode is enabled. '*' means 'any station name'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.1.7.10 | ScalarsnMspsFirewallNatProfinetTransparentModeVlanID | read-write | current | Interface index (ifTable) of existing L3 VLAN, which will be handled as Profinet Transparent VLAN. 0 means not assigned. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2 | IdentitysnMspsFirewallSourceNat | current | The objects in this group define source nat rules. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.1 | TablesnMspsFirewallMasqueradingTable | not-accessible | deprecated | This table represents attributes that a nat implementation will traverse in order to decide how an IP packet traversing the system boundaries shall be processe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.1.1 | RowsnMspsFirewallMasqueradingEntry | not-accessible | deprecated | An entry in the snMspsFirewallNatTable, representing the configuration attributes of a single basic nat rule. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.1.1.2 | ColumnsnMspsFirewallMasqueradingDestinationInterface | not-accessible | deprecated | An SNMP index specifing the destination interface or connection for a nat rule. This rule will only be applied to packets leaving the device boundaries via the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.1.1.100 | ColumnsnMspsFirewallMasqueradingRowStatus | read-create | deprecated | This is a control variable. It controls the instantiation of a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2 | TablesnMspsFirewallSourceNatTable | not-accessible | current | This table represents attributes that a nat implementation will traverse in order to decide how an IP packet traversing the system boundaries shall be processe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1 | RowsnMspsFirewallSourceNatEntry | not-accessible | current | An entry in the snMspsFirewallSourceNatTable, representing the configuration attributes of a single source nat rule. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.1 | ColumnsnMspsFirewallSourceNatSourceInterface | not-accessible | current | An SNMP index specifing the destination interface or connection for a nat rule. This rule will only be applied to packets leaving the device boundaries via the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.2 | ColumnsnMspsFirewallSourceNatDestinationInterface | not-accessible | current | An SNMP index specifing the destination interface or connection for a nat rule. This rule will only be applied to packets leaving the device boundaries via the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.3 | ColumnsnMspsFirewallSourceNatAuxIndex | not-accessible | current | SNMP Auxillary Index in case of multiple nat rules with the same source and destination interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.5 | ColumnsnMspsFirewallSourceNatAddrType | read-create | current | Valid types for this object: all, single, range, subnet. The ip address type of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.10 | ColumnsnMspsFirewallSourceNatSourceAddrSpec | read-create | current | The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.11 | ColumnsnMspsFirewallSourceNatSourceAddrFrom | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.12 | ColumnsnMspsFirewallSourceNatSourceAddrTo | read-create | current | The end ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.13 | ColumnsnMspsFirewallSourceNatSourceAddrPrefix | read-create | current | The subnet prefix of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.20 | ColumnsnMspsFirewallSourceNatDestinationAddrSpec | read-create | current | The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.21 | ColumnsnMspsFirewallSourceNatDestinationAddrFrom | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.22 | ColumnsnMspsFirewallSourceNatDestinationAddrTo | read-create | current | The end ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.23 | ColumnsnMspsFirewallSourceNatDestinationAddrPrefix | read-create | current | The subnet prefix of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.30 | ColumnsnMspsFirewallSourceNatTranslatedSourceAddrSpec | read-create | current | Valid types for this object: single, interface. The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.31 | ColumnsnMspsFirewallSourceNatTranslatedSourceAddr | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.2.1.100 | ColumnsnMspsFirewallSourceNatRowStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.3 | TablesnMspsFirewallNatMasqueradingTable | not-accessible | current | This table represents attributes that a nat implementation will traverse in order to decide how an IP packet traversing the system boundaries shall be processe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.3.1 | RowsnMspsFirewallNatMasqueradingEntry | not-accessible | current | An entry in the snMspsFirewallNatTable, representing the configuration attributes of a single basic nat rule. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.3.1.1 | ColumnsnMspsFirewallNatMasqueradingIpProtoVersion | not-accessible | current | This is an index variable. The attribute's value denotes the IP protocol version affected by the conceptual row's rule. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.3.1.2 | ColumnsnMspsFirewallNatMasqueradingDestinationInterface | not-accessible | current | An SNMP index specifing the destination interface or connection for a nat rule. This rule will only be applied to packets leaving the device boundaries via the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.2.3.1.100 | ColumnsnMspsFirewallNatMasqueradingRowStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3 | IdentitysnMspsFirewallDestinationNat | current | The objects in this group define destination nat rules. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1 | TablesnMspsFirewallNaptNatTable | not-accessible | current | This table represents attributes that a nat implementation will traverse in order to decide how an IP packet traversing the system boundaries shall be processe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1 | RowsnMspsFirewallNaptNatEntry | not-accessible | current | An entry in the snMspsFirewallNaptNatTable, representing the configuration attributes of a single nat rule. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.1 | ColumnsnMspsFirewallNaptNatSourceInterface | not-accessible | current | An SNMP index specifing the source interface or connection for a nat rule. This rule will only be applied to packets entering the device boundaries via the spe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.3 | ColumnsnMspsFirewallNaptNatAuxIndex | not-accessible | current | SNMP Auxillary Index in case of multiple nat rules with the same source and destination interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.5 | ColumnsnMspsFirewallNaptNatAddrType | read-create | current | The ip address type of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.20 | ColumnsnMspsFirewallNaptNatDestinationAddrSpec | read-create | current | Valid types for this object: single, interface. The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.21 | ColumnsnMspsFirewallNaptNatDestinationAddr | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.40 | ColumnsnMspsFirewallNaptNatTranslatedDestinationAddrSpec | read-create | current | Valid types for this object: single. The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.41 | ColumnsnMspsFirewallNaptNatTranslatedDestinationAddr | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.50 | ColumnsnMspsFirewallNaptNatProtocol | read-create | current | IP protocol contraints for the nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.51 | ColumnsnMspsFirewallNaptNatDestinationPortFrom | read-create | current | IP protocol port contraints for the nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.52 | ColumnsnMspsFirewallNaptNatDestinationPortTo | read-create | current | IP protocol port contraints for the nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.53 | ColumnsnMspsFirewallNaptNatTranslatedDestinationPortFrom | read-create | current | IP protocol port contraints for the nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.54 | ColumnsnMspsFirewallNaptNatTranslatedDestinationPortTo | read-create | current | IP protocol port contraints for the nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.3.1.1.100 | ColumnsnMspsFirewallNaptNatRowStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4 | IdentitysnMspsFirewallNetmap | current | The objects in this group define netmap nat rules. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1 | TablesnMspsFirewallNetmapTable | not-accessible | current | This table represents attributes that a nat implementation will traverse in order to decide how an IP packet traversing the system boundaries shall be processe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1 | RowsnMspsFirewallNetmapEntry | not-accessible | current | An entry in the snMspsFirewallNetmapTable, representing the configuration attributes of a single nat rule. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.1 | ColumnsnMspsFirewallNetmapSourceInterface | not-accessible | current | An SNMP index specifing the source interface or connection for a nat rule. This rule will only be applied to packets entering the device boundaries via the spe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.2 | ColumnsnMspsFirewallNetmapDestinationInterface | not-accessible | current | An SNMP index specifing the destination interface or connection for a nat rule. This rule will only be applied to packets leaving the device boundaries via the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.3 | ColumnsnMspsFirewallNetmapAuxIndex | not-accessible | current | SNMP Auxillary Index in case of multiple nat rules with the same source and destination interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.4 | ColumnsnMspsFirewallNetmapType | read-create | current | The type of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.5 | ColumnsnMspsFirewallNetmapAddrType | read-create | current | The ip address type of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.10 | ColumnsnMspsFirewallNetmapSourceAddrSpec | read-create | current | Valid types for this object: single, subnet. The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.11 | ColumnsnMspsFirewallNetmapSourceAddr | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.12 | ColumnsnMspsFirewallNetmapSourceUpperAddr | read-create | current | The end ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.13 | ColumnsnMspsFirewallNetmapSourceAddrPrefix | read-create | current | The subnet prefix of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.20 | ColumnsnMspsFirewallNetmapDestinationAddrSpec | read-create | current | Valid types for this object: single, subnet. The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.21 | ColumnsnMspsFirewallNetmapDestinationAddr | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.22 | ColumnsnMspsFirewallNetmapDestinationUpperAddr | read-create | current | The end ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.23 | ColumnsnMspsFirewallNetmapDestinationAddrPrefix | read-create | current | The subnet prefix of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.30 | ColumnsnMspsFirewallNetmapTranslatedSourceAddrSpec | read-create | current | Valid types for this object: single, subnet. The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.31 | ColumnsnMspsFirewallNetmapTranslatedSourceAddr | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.32 | ColumnsnMspsFirewallNetmapTranslatedSourceUpperAddr | read-create | current | The end ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.33 | ColumnsnMspsFirewallNetmapTranslatedSourceAddrPrefix | read-create | current | The subnet prefix of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.40 | ColumnsnMspsFirewallNetmapTranslatedDestinationAddrSpec | read-create | current | Valid types for this object: single, subnet. The ip address specification of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.41 | ColumnsnMspsFirewallNetmapTranslatedDestinationAddr | read-create | current | The start ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.42 | ColumnsnMspsFirewallNetmapTranslatedDestinationUpperAddr | read-create | current | The end ip address of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.43 | ColumnsnMspsFirewallNetmapTranslatedDestinationAddrPrefix | read-create | current | The subnet prefix of a nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.45 | ColumnsnMspsFirewallNetmapAliasIp | read-create | current | This parameter whether alias ip addresses are created or not. If auto(0) is choosen an alias ip address will be automatically created, if the netmap entry comp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.47 | ColumnsnMspsFirewallNetmapVrIfIndex | read-create | current | This object contains the interface index of the virtual router instance that controls the nat entry. If the value is zero, the nat entry is not controlled by v… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.49 | ColumnsnMspsFirewallNetmapVrId | read-create | current | This object contains the Virtual Router Identifier (VRID) of the virtual router instance that controls the nat entry. If the value is zero, the nat entry is no… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.60 | ColumnsnMspsFirewallNetmapComment | read-create | current | The object a description of the nat entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.1.4.1.1.100 | ColumnsnMspsFirewallNetmapRowStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.2 | IdentitysnMspsFirewallNatEvents | current | The MIB objects in this group extend the event reporting capabilites of the nat implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.74.3 | IdentitysnMspsFirewallNatConformance | current | The MIB objects in this group extend the event reporting capabilites of the nat implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83 | NodesnMspsDas | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.1 | NodesnMspsDasScalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.1.1 | ScalarsnMspsDasNoOfEntries | read-only | current | Indicates the total number of (host, IP) bindings, across all VLANs, at a given time. This is nothing but the total number of entries in the IP binding database |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2 | NodesnMspsDasObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1 | TablesnMspsDasConfigInterfaceTable | not-accessible | current | This table provides objects to enable or disable DaS functionality on member ports of the tia-interface (or management vlan interface). When DaS is enabled, DC… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1.1 | RowsnMspsDasConfigInterfaceEntry | not-accessible | current | An entry in this table represents an interface on which DaS status (enabled/disabled) can be set. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1.1.1 | ColumnsnMspsDasIfIndex | not-accessible | current | Interface index on which remote system infomation is received. This is an index of the table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1.1.2 | ColumnsnMspsDasStatus | read-write | current | When the object is set to enabled(1), remote system information packets are consumed on all member ports of management vlan interface or tia-interface for a de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2 | TablesnMspsDasRemoteSystemTable | not-accessible | current | This table contains one or more rows per physical network connection known to this local system. The local system may wish to ensure that only one remote entry… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1 | RowsnMspsDasRemoteSystemEntry | not-accessible | current | Entries contain information about a particular physical network connection. Entries may be created and deleted in this table by the local system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.2 | ColumnsnMspsDasHostMac | not-accessible | current | Mac address of the remote system. This is an index of the table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.3 | ColumnsnMspsDasIpAddrType | read-write | current | The address type (IPv4/IPv6) to discover or configure from remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.4 | ColumnsnMspsDasIpAddr | read-write | current | IP address to discover or configure from remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.5 | ColumnsnMspsDasIpAddrPfxLen | read-write | current | Discovers the subnetmask of the remote IP address of remote system. This object also can configure the subnetmask of remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.6 | ColumnsnMspsDasNextHopAddrType | read-write | current | The address type (IPv4/IPv6) of IP discovered or configured from remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.7 | ColumnsnMspsDasNextHopAddr | read-write | current | Discovers the Gateway IP address of remote system. This object also can configure the Gateway IP address of remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.8 | ColumnsnMspsDasTypeOfStation | read-only | current | The string value used to identify the type of station description of given port associated with the remote system. The length of the string is restricted to 25. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.9 | ColumnsnMspsDasNameOfStation | read-write | current | The string value used to identify discovered remote sytem name information. This object can configure remote system name. The string length is restricted to 12… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.10 | ColumnsnMspsDasSignalTimeOut | read-write | current | The signal time is provided to make the remote system blink for the configured time interval. The time interval to be configured multiples of 5. As remote syst… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.11 | ColumnsnMspsDasDhcpOrIp | read-only | current | This object provides the remote system IP information, whether IP is dynamically allocated by DHCP or configured manually. This option is fetched from the DCP … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.12 | ColumnsnMspsDasIpStatus | read-only | current | This object provides the information, whether IP is discovered from the remote system or configured locally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.13 | ColumnsnMspsDasNameStatus | read-only | current | This object provides the information, whether Name is discovered from the remote system or configured locally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.14 | ColumnsnMspsDasRemoteSystemStatus | read-write | current | The status of the row. NOT_READY, CREATE_AND_WAIT, CREATE_AND_GO and DESTROY are not allowed. Before changing the objects make the rowstatus as NOT_IN_SERVICE,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84 | NodesnMspsRcap | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2 | IdentitysnMspsRcapConfig | current | The MIB objects in this group define the Management Information Base for configuration of Packet Capture | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.1 | ScalarsnMspsRcapActivateAfterRestart | read-write | current | This is a control variable. It is written by an external management entity. If not enabled, all Packet Capture settings will be reverted to default after syste… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.3 | ScalarsnMspsRcapPort | read-write | current | This is a control variable. It is written by an external management entity. The MIB object defines the used port number |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.5 | ScalarsnMspsRcapOutputMode | read-write | current | This is a control variable. It is written by an external management entity. If set to 'remote', Packet Capture operates in Remote Capture mode only. If set to … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.9 | ScalarsnMspsRcapCommitSettings | read-write | current | This is a control variable. It is written by an external management entity. Write access using commit(1) initiates commit all previously configured parameters,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.10 | TablesnMspsRcapConfigTable | not-accessible | current | The table contains information of reusable remote capturing configurations. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.10.1 | RowsnMspsRcapConfigEntry | not-accessible | current | An entry in the remote capturing configuration table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.10.1.1 | ColumnsnMspsRcapEnable | read-write | current | This is a control variable. It is written by an external management entity. Enables or disables remote capturing functionality on corresponding interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.10.1.2 | ColumnsnMspsRcapPromiscuous | read-write | current | This is a control variable. It is written by an external management entity. Enables or disables promiscous mode on interface, which supports remote capturing f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.10.1.8 | ColumnsnMspsRcapFilter | read-write | current | This is a control variable. It is written by an external management entity. Defines Berkeley packet filters for interface, which supports local capturing funct… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.15 | ScalarsnMspsRcapUsername | read-write | current | Username for remote packet capture. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.16 | ScalarsnMspsRcapPassword | read-write | current | Password for remote packet capture. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.84.2.20 | ScalarsnMspsRcapCertFilename | read-write | current | Certificate filename for remote packet capture encryption. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.93 | NodesnMspsSleepMode | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.93.5 | IdentitysnMspsSleepModeConfig | current | The MIB objects in this group define the Management Information Base for configuration of Sleep Mode | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.93.5.5 | ScalarsnMspsSleepModeDuration | read-write | current | This is a control variable. It is written by an external management entity. This value represents duration in minutes, which will be applied when activating de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.93.5.20 | ScalarsnMspsSleepModeCommitSettings | read-write | current | This is a control variable. It is written by an external management entity. Write access using activate(1) initiates commit all previously configured parameter… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94 | NodesnMspsTcpEvent | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1 | IdentitysnMspsTcpEventConfig | current | The MIB objects in this group define the Management Information Base for mobile terminal equipment. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.1 | ScalarsnMspsTcpEventEnable | read-write | current | This is a control variable. It is written by the local management entity. Desired status. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.5 | ScalarsnMspsTcpEventUsername | read-write | current | This is a control variable. It is written by the local management entity. Username. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.6 | ScalarsnMspsTcpEventPassword | read-write | current | This is a control variable. It is written by the local management entity. Password. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.7 | ScalarsnMspsTcpEventCertFilename | read-write | current | Certificate filename for tcpevent encryption. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.10 | ScalarsnMspsTcpEventPort | read-write | current | This is a control variable. It is written by the local management entity. Port number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.15 | TablesnMspsTcpEventListTable | not-accessible | current | This table represents attributes of event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.15.1 | RowsnMspsTcpEventListEntry | not-accessible | current | An entry in the snMspsTcpEventListTable represents the configuration attributes of a single TcpEvent |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.15.1.1 | ColumnsnMspsTcpEventListIndex | not-accessible | current | This is an auxiliary variable The object value identifies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.15.1.4 | ColumnsnMspsTcpEventListType | read-only | current | Type of event which should be stored in tcp packet. This event should be triggered if it is activated |
| 1.3.6.1.4.1.4329.20.1.1.1.1.94.1.15.1.15 | ColumnsnMspsTcpEventListActivate | read-write | current | Enable or disable specific event by this object |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96 | NodesnMspsTimeSync | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.1 | NodesnMspsTimeSyncSwitchover | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.1.1 | ScalarsnMspsTimeSyncSwitchoverFallbackTime | read-write | current | Timeout value after which a time sync mechanism can overwrite the systemtime set by a time sync mechanism with better priority value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.1.2 | TablesnMspsTimeSyncSwitchoverPrioTable | not-accessible | current | The table allows controlling of the switchover priority of time sync mechanims. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.1.2.1 | RowsnMspsTimeSyncSwitchoverPrioEntry | not-accessible | current | A row in the time sync prio table. Each row represents a sync mechanism and contains objects to define its priority. Entries cannot be created or deleted via S… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.1.2.1.1 | ColumnsnMspsTimeSyncSwitchoverPrioIndex | not-accessible | current | The unique value which identifies this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.1.2.1.2 | ColumnsnMspsTimeSyncSwitchoverPrioName | read-only | current | The name of the sync mechanism. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.1.2.1.3 | ColumnsnMspsTimeSyncSwitchoverPrioValue | read-write | current | Controls the switchover priority of the time sync mechanism. A lower value will have precedence above higher values. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.2 | NodesnMspsTimeSyncTimeZone | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.2.1 | ScalarsnMspsTimeSyncSwitchTimeZone | read-write | current | Set the Timezone Diff Time with the UTC Time representation or any other ime representation. format is +/-HH:MM for Systme time on Manual mode. Only considered… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.96.2.2 | ScalarsnMspsTimeSyncSimaticTimeZone | read-write | current | Set the Timezone Diff Time with the UTC Time representation or any other ime representation. format is +/-HH:MM for Sytem time on Simatic mode. Only considered… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114 | NodesnMspsCommitControl | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1 | IdentitysnMspsCommitCtrlObjects | current | The MIB objects in this group define the Management Information Base objects for configuration commit control. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.1 | IdentitysnMspsCommitCtrlGlobal | current | The objects in this group define attributes that control all parameters with a systemic scope, as opposed to parameters with limited scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.1.1 | ScalarsnMspsCommitCtrlImplemented | read-write | current | This is a capability variable. It is written by an local management entity. The object indicates whether the SNMP MIB referenced by this table entry supports a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.1.2 | ScalarsnMspsCommitCtrlMode | read-write | current | This is a control variable. It is written by an external management entity. The object is intended to give a management entity full control over the point of t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.1.3 | ScalarsnMspsCommitCtrlStatus | read-write | current | This is a control variable. It is written by an external management entity. An attempt to write any other value than startCommit(2) will result in a badValue e… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.2 | TablesnMspsCommitCtrlORTable | not-accessible | current | . |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.2.1 | RowsnMspsCommitCtrlOREntry | not-accessible | current | . |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.2.1.1 | ColumnsnMspsCommitCtrlORImplemented | read-write | current | This is a capability variable. It is written by an local management entity. The object indicates whether the SNMP MIB referenced by this table entry supports a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.2.1.2 | ColumnsnMspsCommitCtrlORMode | read-write | current | This is a control variable. It is written by an external management entity. The object is intended to give a management entity full control over the point of t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.114.1.2.1.3 | ColumnsnMspsCommitCtrlORStatus | read-write | current | This is a control variable. It is written by an external management entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.3 | NodesnMspsModules | |||
| 1.3.6.1.4.1.4329.20.1.1.1.3.1 | NodesnMspsTc | |||
| 1.3.6.1.4.1.4329.20.1.1.1.451 | NodesnMspsTrapPnacPortAuthStateChange | Pnac port auth state change notification. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1451 | NodesnMspsTrapRmActiveState | Redundancy manager entered active state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1452 | NodesnMspsTrapRmPassiveState | Redundancy manager entered passive state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1501 | NodesnMspsTrapStandbyActiveState | Standby manager entered active state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1502 | NodesnMspsTrapStandbyPassiveState | Standby manager entered passive state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2201 | NodesnMspsTrapVRRPStateChange | Device changed vrrp master state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2251 | NodesnMspsTrapLOOPDStateChange | Device changed LOOPD state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2301 | NodesnMspsTrapOSPFStateChange | Device changed OSPF route state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2351 | NodesnMspsTrapMNMobileConnectionSuccess | Mobile connection successfull. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2352 | NodesnMspsTrapMNMobileConnectionFailure | Mobile connection failed. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2353 | NodesnMspsTrapMNMobileConnectionLost | Mobile connection lost. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2401 | NodesnMspsTrapVPNTunnelStateChange | VPN tunnel state change detected. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2851 | NodesnMspsTrapDigitalIOStateChange | Digital IO pin state change detected. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2901 | NodesnTrapMspsLinkCheckBrokenLinkDetected | Link Check disabled port because of broken link. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2902 | NodesnTrapMspsLinkCheckPortEnabled | By Link Check disabled port is enabled again. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2903 | NodesnTrapMspsLinkCheckMultiplePartners | Link Check detected multiple partners on port. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2904 | NodesnTrapMspsLinkCheckMultiplePartnersReset | Link Check partner detection reset on port. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2905 | NodesnTrapMspsLinkCheckCriticalLinkDetected | Link Check indicates critical link state on port. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2906 | NodesnTrapMspsLinkCheckCriticalLinkReset | By Link Check indicated critical link state reset on port. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2907 | NodesnTrapMspsLinkCheckUnapprovedConfigDetected | Unapproved Link Check configuration. Disable Link Check on this port. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2908 | NodesnTrapMspsLinkCheckUnapprovedConfigResolved | Unapproved Link Check configuration resolved on this port. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3001 | NodesnMspsTrapMrpInterconMgrOpenState | MRP Interconnection state change to open. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3002 | NodesnMspsTrapMrpInterconMgrClosedState | MRP Interconnection state change to closed. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3051 | NodesnMspsTrapPoeStateChange | Poe state change notification. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3151 | NodesnMspsRMapTrapMatch | Signifies that there has been a route matching with route map | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3201 | NodesnMspsPimHAEventTrap | A notification is sent to the management entity whenever there is a state change in the PIM hotstandby Module. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3202 | NodesnMspsPimBidirEventTrap | A notification is sent to the management entity whenever a Bidirectional mode enabled router receives a Hello Msg from a Bidirectional disabled router, in a ra… | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3251 | NodesnMspsMsdpEstablished | The MSDP Established event is generated when the MSDP FSM enters the ESTABLISHED state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3252 | NodesnMspsMsdpBackwardTransition | The MSDPBackwardTransition Event is generated when the MSDP FSM moves from a higher-numbered state to a lower-numbered state. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3253 | NodesnMspsMsdpRPOperStatusChange | The snMspsMsdpRPOperStatus Event is generated when the MSDP RP's Oper Status changes from one state to other. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3301 | NodesnMspsDhcpRelay6RlyInvalidPacketTrap | This trap is generated when received Message is Invalid. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3302 | NodesnMspsDhcpRelay6RlyMaxHopCountTrap | This trap is generated when relay agent is not able to add the relay header because the received hop count value is equal to the configured hop count value. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3351 | NodesnMspsOspf3RestartStatusChange | An ospfv3RestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when the r… | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3352 | NodesnMspsOspf3NbrRestartHelperStatusChange | An snMspsOspf3NbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should … | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3353 | NodesnMspsOspf3VirtNbrRestartHelperStatusChange | An snMspsOspf3VirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This … | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3354 | NodesnMspsOspf3HotStandbyStateChgTrap | A notification is sent to the management entity whenever there is a state change in the OSPFv3 hotstandby Module. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.3355 | NodesnMspsOspf3HotStandbyBulkUpdAbortTrap | A notification is sent to the management entity whenever the bulk update is aborted |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InterfaceList | OCTET STRING | current | Each octet within this value specifies a set of eight interfaces, with the first octet specifying router-ports 1 through 8, the second octet specifying router-ports 9 through 16, etc. Within each octet, the most signifi… |
| NTPAssocIdentifier | Integer32 (1..2147483647) | current | The association identifier of the peer. Every peer with which an NTP server is associated with is identified by an association identifier. |
| NTPRefId | OCTET STRING (SIZE (4)) | current | The reference clock identifier. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string as defined in RFC-1305. In the case of strat… |
| NTPSignedTimeValue | Integer32 | current | The time in seconds that could represent signed quantities like time delay with respect to some source. |
| NTPStratum | Integer32 (0..255 ) | current | Indicates the stratum of the clock. The stratum defines the accuracy of a time server. Higher the stratum, lower the accuracy. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, seco… |
| SnMspsCertCryptoAlgorithm | INTEGER { algorithmRSA(1), algorithmECDSA(2) } | current | This textual convention specifies a cryptographic algorithm. |
| SnMspsCertExtendedKeyUsage | BITS { serverAuth(0), clientAuth(1), emailProtection(2), codeSigning(3), msSGC(4), ocspSigning(5), timeStamping(6), dvcs(7), objSignCa(8), sMimeCa(9), sslCa(10), objSign(11), sMime(12), sslServer(13), sslClient(14) } snMspsCertObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base for X509 certificates." ::= { snMspsCert 1 } | current | This textual convention specifies a set of X509 extended key usage attributes. |
| SnMspsCertHexadecimalValue | OCTET STRING | current | This textual convention specifies the marker format that may be set in the inbound and/or outbound IPsec SAs and policies. |
| SnMspsCertKeyUsage | BITS { digitalSignature(0), contentCommitment(1), keyEncipherment(2), dataEncipherment(3), keyAgreement(4), keyCertSign(5), cRLSign(6), encipherOnly(7), decipherOnly(8) } | current | This textual convention specifies a set of X509 key usage attributes. |
| SnMspsCertStandards | BITS { bRSA(0), bECDSA(1) } | current | This textual convention specifies a set of cryptographic standards. |
| SnMspsCertType | INTEGER { typeCACert(1), typeMachineCert(2), typeRemoteCert(3), typeKeyFile(4) } | current | This textual convention specifies a certificate type. |
| SnMspsCommitCtrlMode | INTEGER { automatic(1), manual(2) } | current | The syntax specifies whether configuration changes shall be committed to the runtime execution environment automatically, or whether changed settings shall be retained until a commit to the runtime is explicitly request… |
| SnMspsCommitCtrlStatus | INTEGER { idle(1), startCommit(2), inProgress(3), changesPending(4) } snMspsCommitCtrlObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base objects for configuration commit control." ::= { snMspsCommitControl 1 } snMspsCommitCtrlGlobal OBJECT-IDENTITY STATUS current DESCRIPTION "The objects in this group define attributes that control all parameters with a systemic scope, as opposed to parameters with limited scope." ::= { snMspsCommitCtrlObjects 1 } | current | The syntax enables a remote management entity to explicitly control if and when changes to the runtime execution environment settings shall be committed. 1 - This is an informative status indicator value. This value wil… |
| SnMspsDhcpClient6DuidType | INTEGER { dtLlt (1), dtEn (2), dtLl (3) } | current | A DUID consists of a two-octet type code represented in network byte order, followed by a variable number of octets that make up the actual identifier. The following types are currently defined: 1 Link-layer address plu… |
| SnMspsDhcpClient6DuidValue | OCTET STRING (SIZE(1..130)) | current | Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify clients for the selection of configuration parameters and in the association of IAs with clients. DHCP clients use DUIDs to Identify a client in mes… |
| SnMspsDhcpClientDuidType | INTEGER { dtLlt (1), dtEn (2), dtLl (3) } | current | A DUID consists of a two-octet type code represented in network byte order, followed by a variable number of octets that make up the actual identifier. The following types are currently defined: 1 Link-layer address plu… |
| SnMspsDhcpClientDuidValue | OCTET STRING (SIZE(1..130)) | current | Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify clients for the selection of configuration parameters and in the association of IAs with clients. DHCP clients use DUIDs to Identify a client in mes… |
| SnMspsDigitalIOCountersReset | INTEGER { no-operation(1), reset(2) } snMspsDigitalIOObjects OBJECT-IDENTITY STATUS current DESCRIPTION "A collection of SNMP MIB objects that support the management of digital input and output lines." ::= { snMspsDigitalIO 1 } snMspsDigitalIOGeneral OBJECT-IDENTITY STATUS current DESCRIPTION "A group of management objects with generic scope." ::= { snMspsDigitalIOObjects 1 } | current | This textual convention describes the interface used to control the content of counter-like objects. 1 - When this value is written to a control object, it has no effect. When a control object is read, this value will b… |
| SnMspsDigitalIOLogicLevel | INTEGER { levelLo(1), levelHi(2), triState(3) } | current | This textual convention specifies the logic levels a digital IO entity may adopt. 1 - Represents the logic level defined as 'low' or 'logical 0'. 2 - Represents the logic level defined as 'high' or 'logical 1'. 3 - Repr… |
| SnMspsDigitalIOPersistenceType | INTEGER { temporary(1), permanent(2) } | current | This textual convention describes the persistence realization of the administrative (read-write) values within a conceptual row. 1 - The administrative values are lost once a system restarts. Some system-defined default… |
| SnMspsDigitalIOTriggerMode | INTEGER { edge(1), level(2) } | current | This textual convention specifies the trigger mode a digital IO entity may adopt. 1 - Represents an edge-triggered input. 2 - Represents a level-triggered input. An implementation may chose to limit the range of options… |
| SnMspsEnabledStatus | INTEGER { enabled(1), disabled(2) } snMspsStpL2TObjects OBJECT-IDENTITY STATUS current DESCRIPTION "A collection of SNMP MIB objects that support the management of Layer-2 Tunnel port specific extensions of the Spanning Tree Protocol (STP)." ::= { snMspsStpL2T 1 } snMspsStpL2TGeneral OBJECT-IDENTITY STATUS current DESCRIPTION "A group of management objects with generic scope." ::= { snMspsStpL2TObjects 1 } | current | This textual convention specifies a status value usable for administrative and operative objects. 1 - Represents an enabled status. 2 - Represents a disabled status. |
| SnMspsFirewallNatAddrSpec | INTEGER { subnet(1), range(2), single(3), interface(4), all(10) } | current | This textual convention specifies the type of an ip entry and which corresponding fields will be evaluated by the implementation. The corresponding InetAddressType is evaluated in any case. If all(1) is choosen none of … |
| SnMspsFirewallNatAliasIpMode | INTEGER { auto(0), enable(1), disable(2) } | current | This textual convention specifies aliad ip mode of a netmap nat entry. If auto(0) is choosen an alias ip address will be automatically created, if the netmap entry comprises only a single translated ip address (e.g. /32… |
| SnMspsFirewallNatProtocol | BITS { other (0), icmp (1), udp (2), tcp (3) } | current | This textual convention specifies protocol contraints for nat rules. |
| SnMspsFirewallNatVrrpv3VrIdOrZero | Integer32 (0..255) snMspsFirewallNatObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group define the Management Information Base of the nat implementation." ::= { snMspsFirewallNat 1 } snMspsFirewallNatGlobal OBJECT-IDENTITY STATUS current DESCRIPTION "The objects in this group define the management attributes of the nat implementation with systemic scope." ::= { snMspsFirewallNatObjects 1 } snMspsFirewallNatIdleTimeout OBJECT-IDENTITY STATUS current DESCRIPTION "The objects in this group define idle timeouts for nat'd connections." ::= { snMspsFirewallNatGlobal 1 } | current | This textual convention is an extension of the Vrrpv3VrIdTC convention of VRRPV3-MIB. The latter defines a greater than zero value of the Virtual Router Identifier noted as (VRID) in RFC 5798. This extension permits the… |
| SnMspsFirewallNetmapType | INTEGER { local(1), remote(2), both(3) } | current | This textual convention specifies the type of a netmap nat entry. |
| SnMspsFunctionString | DisplayString (SIZE (32)) | current | The format of function tags according IEC 61158-6-10, chapter 6.2.4.83.13. The value shall be filled with blanks if it is shorter than 32. Non-printable characters and control sequences are not allowed. |
| SnMspsIpAddress | OCTET STRING | current | An octet string which represents either a IPv4 address or a IPv6a ddress or a DNS compliant name. |
| SnMspsLocationString | DisplayString (SIZE (22)) | current | The format of function tags according IEC 61158-6-10, chapter 6.2.4.83.14. The value shall be filled with blanks if it is shorter than 22. Non-printable characters and control sequences are not allowed. |
| SnMspsMacAddress | OCTET STRING (SIZE (6)) | current | A six octet string (48-bit), using the hexadecimal representation, in canonical order specified by IEEE Std 802 (Overview and Architecture, formerly IEEE Std 802.1a). Shorter MAC address values than 48 bits, if used, ar… |
| SnMspsOrderNumber | OCTET STRING (SIZE (1|5..32)) | current | The format of type identification / order numbers of Siemens MSPS products. |
| SnMspsSerialNumber | OCTET STRING (SIZE (1|5..32)) | current | The format of serial numbers of Siemens MSPS products. |
| SnMspsStatus | INTEGER { invalid(0), enable(1), disable(2) } | current | A uniform representation of status values. |
| SnMspsTrigger | INTEGER { trigger(1), notTriggered(2) } | current | A uniform representation of trigger values |
| SnMspsVersionNumber | OCTET STRING (SIZE (5..32)) | current | The version format of Siemens MSPS in a simplified OSLO form : [RCSTBPVKD][0-9]{1,2}\.[0-9]{1,2}\.[0-9]{1,2} |
| SnMspsWlanAntennaSignalStrengthList | OCTET STRING(SIZE(4)) snMspsWlanObjects OBJECT-IDENTITY STATUS current DESCRIPTION "The MIB objects in this group extend the definitions of the standard IEEEdot11-MIB." ::= { snMspsWlan 1 } snMspsWlanSmt OBJECT-IDENTITY STATUS current DESCRIPTION "The objects in this group extend the Station ManagemenT attributes defined in the IEEEdot11-MIB." ::= { snMspsWlanObjects 1 } | current | This textual convention specifies a list of signal strength (Rx or Tx) in dBm per antenna connector. The corresponding value will be stored as an octet in a 4 bytes array, where the array index is 'antenna connector-1'.… |
| SnMspsWlanConnectionState | INTEGER { unknown(0), connected(1), available(2), authenticationInProgress(10), authenticationFailed(11), notEstablished(20), invalidMAC(21), timeout(22) } | current | This textual convention specifies the state of a WLAN connection. 0 - The connection state is currently unknown. 1 - The connection is established. 2 - The connection is available, but purposely not established. This ma… |
| SnMspsWlanDataRateModulationType | INTEGER { cck(1), ofdm(2), ht(3) } | current | This textual convention specifies a PHY modulation type. 1 - Complementary Code Keying (CCK) is employed as the modulation scheme. 2 - Orthogonal Frequency Division Multiplexing (OFDM) is employed as the modulation sche… |
| SnMspsWlanSecurityAlgorithm | INTEGER { unknown(0), openSystem(1), encrypted(2), wpaRadius(3), wpa-psk(4), wpa2Radius(5), wpa2-psk(6), autoWpaWpa2Radius(7), autoWpaWpa2-psk(8), wpa3-sae(10), wpa2-psk-sha256(15), wpa2Radius-sha256(16), wpa3-owe (17), wpa3-owe-transition (18) } | current | This textual convention specifies the security level of a WLAN station. 0 - The station uses an unknown security algorithm. 1 - The station does not employ a security mechanism. 2 - The station uses an Open System with … |
| SnMspsWlanStationType | INTEGER { other(1), apSta(2), adHoc(3), wds(4), wred(5), l2t(6), ipcf(7), ipcf-mc(8), ipcf-l2t(9), ipcf-mc-l2t(10), iref(11), iprp(13), ipcf-ht(15), ipcf-ht-l2t(16), ipcf-legacy-free(20), ipcf-legacy-free-l2t(21), ipcf-mc-legacy-free(24), ipcf-mc-legacy-free-l2t(25), ipcf-2(30), ipcf-2-l2t(31) } | current | This textual convention specifies the type of a WLAN station. 1 - The station type could not be determined. 2 - The station is a member of a IEEE802.11 compliant Basic Service Set (BSS), which is also called an infrastr… |
| TunnelStatus | INTEGER { peer(1), tunnel(2), discard(3) } | current | To specify how to handle the L2 protocol packets received on a particular port. When the option is set to 'peer', the L2 protocol packets received on a particular port will be processed in the Bridge. When the option is… |