SNA-SDLC-MIB
159 objects
This is the MIB module for objects used to manage SDLC devices.
Imported Objects
| IF-MIB | ifAdminStatus ifIndex ifOperStatus |
| RFC1213-MIB | mib-2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TimeInterval |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.41 | IdentitysnaDLC | This is the MIB module for objects used to manage SDLC devices. | ||
| 1.3.6.1.2.1.41.1 | Nodesdlc | |||
| 1.3.6.1.2.1.41.1.1 | NodesdlcPortGroup | |||
| 1.3.6.1.2.1.41.1.1.1 | TablesdlcPortAdminTable | not-accessible | current | This table contains objects that can be changed to manage an SDLC port. Changing one of these parameters may take effect in the operating port immediately or m… |
| 1.3.6.1.2.1.41.1.1.1.1 | RowsdlcPortAdminEntry | not-accessible | current | A list of configured values for an SDLC port. |
| 1.3.6.1.2.1.41.1.1.1.1.1 | ColumnsdlcPortAdminName | read-write | current | An octet string that defines the physical port to which this interface is assigned. It has implementation-specific significance. Its value shall be unique with… |
| 1.3.6.1.2.1.41.1.1.1.1.2 | ColumnsdlcPortAdminRole | read-write | current | This object describes the role that the link station shall assume the next time a connection is established. Even though this is defined as a port object, it i… |
| 1.3.6.1.2.1.41.1.1.1.1.3 | ColumnsdlcPortAdminType | read-write | current | This parameter defines whether the SDLC port is to connect to a leased or switched line. A write operation to this administrative value shall not take effect u… |
| 1.3.6.1.2.1.41.1.1.1.1.4 | ColumnsdlcPortAdminTopology | read-write | current | This parameter defines whether the SDLC port is capable of operating in either a point-to-point or multipoint topology. sdlcPortAdminTopology == multipoint imp… |
| 1.3.6.1.2.1.41.1.1.1.1.5 | ColumnsdlcPortAdminISTATUS | read-write | current | This parameter controls the initial value of the administrative status, ifAdminStatus, of this SDLC port at port start-up. Depending on the implementation, a w… |
| 1.3.6.1.2.1.41.1.1.1.1.6 | ColumnsdlcPortAdminACTIVTO | read-write | current | This parameter defines the period of time (in 1/100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switche… |
| 1.3.6.1.2.1.41.1.1.1.1.7 | ColumnsdlcPortAdminPAUSE | read-write | current | This object defines the minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary SDLC port. Depending on the im… |
| 1.3.6.1.2.1.41.1.1.1.1.8 | ColumnsdlcPortAdminSERVLIM | read-write | current | This object defines the number of times the active poll list will be traversed before polling a station on the slow poll list for a primary, multipoint SDLC po… |
| 1.3.6.1.2.1.41.1.1.1.1.9 | ColumnsdlcPortAdminSlowPollTimer | read-write | current | This object describes the elapsed time (in 1/100ths of a second) between polls for failed secondary link station addresses. Depending on the implementation, a … |
| 1.3.6.1.2.1.41.1.1.2 | TablesdlcPortOperTable | not-accessible | current | This table contains current SDLC port parameters. Many of these objects have corresponding objects inthe sdlcPortAdminTable. |
| 1.3.6.1.2.1.41.1.1.2.1 | RowsdlcPortOperEntry | not-accessible | current | Currently set parameters for a specific SDLC port. |
| 1.3.6.1.2.1.41.1.1.2.1.1 | ColumnsdlcPortOperName | read-only | current | An octet string that describes the physical port to which this interface is currently attached. It has implementation-specific significance. |
| 1.3.6.1.2.1.41.1.1.2.1.2 | ColumnsdlcPortOperRole | read-only | current | This object describes the role that the link station has assumed on this connection. Even though this is defined as a port object, it is a link station attribu… |
| 1.3.6.1.2.1.41.1.1.2.1.3 | ColumnsdlcPortOperType | read-only | current | This parameter defines whether the SDLC port is currently operating as though connected to a leased or switched line. |
| 1.3.6.1.2.1.41.1.1.2.1.4 | ColumnsdlcPortOperTopology | read-only | current | This parameter defines whether the SDLC port is currently operating in a point-to-point or multipoint topology. |
| 1.3.6.1.2.1.41.1.1.2.1.5 | ColumnsdlcPortOperISTATUS | read-only | current | This parameter describes the initial value of the administrative status, ifAdminStatus, of this SDLC port at last port start-up. |
| 1.3.6.1.2.1.41.1.1.2.1.6 | ColumnsdlcPortOperACTIVTO | read-only | current | This parameter defines the period of time (in 100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched … |
| 1.3.6.1.2.1.41.1.1.2.1.7 | ColumnsdlcPortOperPAUSE | read-only | current | This object describes the current minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary SDLC port. The objec… |
| 1.3.6.1.2.1.41.1.1.2.1.8 | ColumnsdlcPortOperSlowPollMethod | read-only | current | This object defines the exact method that is in effect for periodically polling failed secondary link station addresses. If sdlcPortOperSlowPollMethod == servl… |
| 1.3.6.1.2.1.41.1.1.2.1.9 | ColumnsdlcPortOperSERVLIM | read-only | current | This object describes the number of times the active poll list is currently being traversed before polling a station on the slow poll list for a primary, multi… |
| 1.3.6.1.2.1.41.1.1.2.1.10 | ColumnsdlcPortOperSlowPollTimer | read-only | current | This object describes the elapsed time (in 1/100ths of a second) between polls for failed secondary link station addresses. This object only has meaning for SD… |
| 1.3.6.1.2.1.41.1.1.2.1.11 | ColumnsdlcPortOperLastModifyTime | read-only | current | This object describes the value of sysUpTime when this port definition was last modified. If the port has not been modified, then this value shall be zero. |
| 1.3.6.1.2.1.41.1.1.2.1.12 | ColumnsdlcPortOperLastFailTime | read-only | current | This object describes the value of sysUpTime when this SDLC port last failed. If the port has not failed, then this value shall be zero. |
| 1.3.6.1.2.1.41.1.1.2.1.13 | ColumnsdlcPortOperLastFailCause | read-only | current | This enumerated object describes the cause of the last failure of this SDLC port. If the port has not failed, then this object has a value of undefined(1). |
| 1.3.6.1.2.1.41.1.1.3 | TablesdlcPortStatsTable | not-accessible | current | Each entry in this table contains statistics for a specific SDLC port. |
| 1.3.6.1.2.1.41.1.1.3.1 | RowsdlcPortStatsEntry | not-accessible | current | A list of statistics for an SDLC port. |
| 1.3.6.1.2.1.41.1.1.3.1.1 | ColumnsdlcPortStatsPhysicalFailures | read-only | current | This object reflects the total number of times this port has failed due to its physical media since port startup. At port startup time, this object must be ini… |
| 1.3.6.1.2.1.41.1.1.3.1.2 | ColumnsdlcPortStatsInvalidAddresses | read-only | current | This object reflects the total number of frames received by this port with invalid link station addresses. |
| 1.3.6.1.2.1.41.1.1.3.1.3 | ColumnsdlcPortStatsDwarfFrames | read-only | current | This object reflects the total number of frames received by this port which were delivered intact by the physical layer but were too short to be legal. Ignorin… |
| 1.3.6.1.2.1.41.1.1.3.1.4 | ColumnsdlcPortStatsPollsIn | read-only | current | This object reflects the total number of polls received by this port since the port was created. |
| 1.3.6.1.2.1.41.1.1.3.1.5 | ColumnsdlcPortStatsPollsOut | read-only | current | This object reflects the total number of polls sent by this port since the port was created. |
| 1.3.6.1.2.1.41.1.1.3.1.6 | ColumnsdlcPortStatsPollRspsIn | read-only | current | This object reflects the total number of poll responses received by this port since the port was created. |
| 1.3.6.1.2.1.41.1.1.3.1.7 | ColumnsdlcPortStatsPollRspsOut | read-only | current | This object reflects the total number of poll responses sent by this port since the port was created. |
| 1.3.6.1.2.1.41.1.1.3.1.8 | ColumnsdlcPortStatsLocalBusies | read-only | current | This object reflects the total number of times that the local SDLC link stations on this port have entered a busy state (RNR). This object is initialized to ze… |
| 1.3.6.1.2.1.41.1.1.3.1.9 | ColumnsdlcPortStatsRemoteBusies | read-only | current | This object reflects the total number of times that the adjacent (i.e., remote) SDLC link stations on this port have entered a busy state (RNR). This object is… |
| 1.3.6.1.2.1.41.1.1.3.1.10 | ColumnsdlcPortStatsIFramesIn | read-only | current | This object reflects the total number of I-Frames that have been received by SDLC link stations on this port. This object is initialized to zero when the port … |
| 1.3.6.1.2.1.41.1.1.3.1.11 | ColumnsdlcPortStatsIFramesOut | read-only | current | This object reflects the total number of I-Frames that have been transmitted by SDLC link stations on this port. This object is initialized to zero when the po… |
| 1.3.6.1.2.1.41.1.1.3.1.12 | ColumnsdlcPortStatsOctetsIn | read-only | current | This object reflects the total octets received from adjacent SDLC link stations on this port. This object covers the address, control, and information field of… |
| 1.3.6.1.2.1.41.1.1.3.1.13 | ColumnsdlcPortStatsOctetsOut | read-only | current | This object reflects the total octets transmitted to adjacent SDLC link stations on this port. This object covers the address, control, and information field o… |
| 1.3.6.1.2.1.41.1.1.3.1.14 | ColumnsdlcPortStatsProtocolErrs | read-only | current | This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of having received a protocol vio… |
| 1.3.6.1.2.1.41.1.1.3.1.15 | ColumnsdlcPortStatsActivityTOs | read-only | current | This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of no activity on the link. This … |
| 1.3.6.1.2.1.41.1.1.3.1.16 | ColumnsdlcPortStatsRNRLIMITs | read-only | current | This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of its RNRLIMIT timer expiring. T… |
| 1.3.6.1.2.1.41.1.1.3.1.17 | ColumnsdlcPortStatsRetriesExps | read-only | current | This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of a retry sequence being exhaust… |
| 1.3.6.1.2.1.41.1.1.3.1.18 | ColumnsdlcPortStatsRetransmitsIn | read-only | current | This object reflects the total number of I-Frames retransmitted by remote link stations for all SDLC link stations on this port. This object is initialized to … |
| 1.3.6.1.2.1.41.1.1.3.1.19 | ColumnsdlcPortStatsRetransmitsOut | read-only | current | This object reflects the total number of I-Frames retransmitted by all local SDLC link stations on this port. This object is initialized to zero when the port … |
| 1.3.6.1.2.1.41.1.2 | NodesdlcLSGroup | |||
| 1.3.6.1.2.1.41.1.2.1 | TablesdlcLSAdminTable | not-accessible | current | This table contains objects that can be changed to manage an SDLC link station. Changing one of these parameters may take effect in the operating link immediat… |
| 1.3.6.1.2.1.41.1.2.1.1 | RowsdlcLSAdminEntry | not-accessible | current | A list of configured values for an SDLC link station. |
| 1.3.6.1.2.1.41.1.2.1.1.1 | ColumnsdlcLSAddress | read-create | current | This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port. |
| 1.3.6.1.2.1.41.1.2.1.1.2 | ColumnsdlcLSAdminName | read-create | current | An octet string that defines the local name of the SDLC link station. This field may be sent in the XID3 control vector 0x0E, type 0xF7. |
| 1.3.6.1.2.1.41.1.2.1.1.3 | ColumnsdlcLSAdminState | read-create | current | This object controls the desired state of the SDLC station. The managed system shall attempt to keep the operational state, sdlcLSOperState, consistent with th… |
| 1.3.6.1.2.1.41.1.2.1.1.4 | ColumnsdlcLSAdminISTATUS | read-create | current | This parameter controls the desired state, sdlcLSAdminState, of the SDLC link station at link station start-up. |
| 1.3.6.1.2.1.41.1.2.1.1.5 | ColumnsdlcLSAdminMAXDATASend | read-create | current | This object contains the maximum PDU size that the local link station thinks it can send to the adjacent link station before having received any XID from the A… |
| 1.3.6.1.2.1.41.1.2.1.1.6 | ColumnsdlcLSAdminMAXDATARcv | read-create | current | This object contains the maximum PDU size that the local link station can receive from the adjacent link station. This value is sent in the XID to the ALS. Thi… |
| 1.3.6.1.2.1.41.1.2.1.1.7 | ColumnsdlcLSAdminREPLYTO | read-create | current | This object controls the reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not receive a response to a poll or message… |
| 1.3.6.1.2.1.41.1.2.1.1.8 | ColumnsdlcLSAdminMAXIN | read-create | current | This object controls the maximum number of unacknowledged I-frames which an SDLC link station may receive. This should range from 1 to (sdlcLSAdminMODULO - 1).… |
| 1.3.6.1.2.1.41.1.2.1.1.9 | ColumnsdlcLSAdminMAXOUT | read-create | current | This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall ran… |
| 1.3.6.1.2.1.41.1.2.1.1.10 | ColumnsdlcLSAdminMODULO | read-create | current | This object controls the modulus for an SDLC link station. This modulus determines the size of the rotating acknowledgement window used the SDLC link station p… |
| 1.3.6.1.2.1.41.1.2.1.1.11 | ColumnsdlcLSAdminRETRIESm | read-create | current | This object controls number of retries in a retry sequence for the local SDLC link station. A retry sequence is a series of retransmitted frames ( data or cont… |
| 1.3.6.1.2.1.41.1.2.1.1.12 | ColumnsdlcLSAdminRETRIESt | read-create | current | This object controls the interval (in 1/100ths of a second) between retry sequences for the local SDLC link station if multiple retry sequences are specified .… |
| 1.3.6.1.2.1.41.1.2.1.1.13 | ColumnsdlcLSAdminRETRIESn | read-create | current | This object controls the number of times that a retry sequence is repeated for the local SDLC link station. A retry sequence is a series of retransmitted frame… |
| 1.3.6.1.2.1.41.1.2.1.1.14 | ColumnsdlcLSAdminRNRLIMIT | read-create | current | This object controls the length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link station to remain in a busy (RNR) stat… |
| 1.3.6.1.2.1.41.1.2.1.1.15 | ColumnsdlcLSAdminDATMODE | read-create | current | This object controls whether communications mode with the adjacent link station is two-way-alternate (half) or two-way-simultaneous (full). A write operation t… |
| 1.3.6.1.2.1.41.1.2.1.1.16 | ColumnsdlcLSAdminGPoll | read-create | current | This object describes the group poll address for this link station instance. If group poll is not in effect for this link station instance, the value for sdlcL… |
| 1.3.6.1.2.1.41.1.2.1.1.17 | ColumnsdlcLSAdminSimRim | read-create | current | This object controls the support for transmission and receipt of SIM and RIM control frames for this link station. The value of this object controls the settin… |
| 1.3.6.1.2.1.41.1.2.1.1.18 | ColumnsdlcLSAdminXmitRcvCap | read-create | current | This object controls the transmit-receive capabilities for this SDLC link station. The value of this object establishes the value of the transmit-receive capab… |
| 1.3.6.1.2.1.41.1.2.1.1.19 | ColumnsdlcLSAdminRowStatus | read-create | current | This object is used by a management station to create or delete the row entry in sdlcLSAdminTable following the RowStatus textual convention. Upon successful c… |
| 1.3.6.1.2.1.41.1.2.2 | TablesdlcLSOperTable | not-accessible | current | This table contains current SDLC link parameters. Many of these objects have corresponding objects in the sdlcLSAdminTable. |
| 1.3.6.1.2.1.41.1.2.2.1 | RowsdlcLSOperEntry | not-accessible | current | A list of status and control values for an SDLC link station. |
| 1.3.6.1.2.1.41.1.2.2.1.1 | ColumnsdlcLSOperName | read-only | current | An octet string that defines the name of the remote SDLC link station. This field is received in the XID3 control vector 0x0E, type 0xF7. |
| 1.3.6.1.2.1.41.1.2.2.1.2 | ColumnsdlcLSOperRole | read-only | current | This object reflects the current role that the link station is assuming. The value of sdlcLSOperRole is undefined(3) whenever the link station role has not yet… |
| 1.3.6.1.2.1.41.1.2.2.1.3 | ColumnsdlcLSOperState | read-only | current | This object describes the operational state of the SDLC link station. The managed system shall attempt to keep this value consistent with the administered stat… |
| 1.3.6.1.2.1.41.1.2.2.1.4 | ColumnsdlcLSOperMAXDATASend | read-only | current | This object contains the actual maximum PDU size that the local link station can send to the adjacent link station. This object is established from the value r… |
| 1.3.6.1.2.1.41.1.2.2.1.5 | ColumnsdlcLSOperREPLYTO | read-only | current | This object reflects the current reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not receive a response to a poll or… |
| 1.3.6.1.2.1.41.1.2.2.1.6 | ColumnsdlcLSOperMAXIN | read-only | current | This object reflects the current maximum number of unacknowledged I-frames which an SDLC link station may receive. This shall range from 1 to (sdlcLSOperMODULO… |
| 1.3.6.1.2.1.41.1.2.2.1.7 | ColumnsdlcLSOperMAXOUT | read-only | current | This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall ran… |
| 1.3.6.1.2.1.41.1.2.2.1.8 | ColumnsdlcLSOperMODULO | read-only | current | This object reflects the current modulus for an SDLC link station. This modulus determines the size of rotating acknowledgement window used by the SDLC link st… |
| 1.3.6.1.2.1.41.1.2.2.1.9 | ColumnsdlcLSOperRETRIESm | read-only | current | This object controls number of retries in a retry sequence for an SDLC link station. A retry sequence is a series of retransmitted frames ( data or control) fo… |
| 1.3.6.1.2.1.41.1.2.2.1.10 | ColumnsdlcLSOperRETRIESt | read-only | current | This object reflects the current interval (in 1/100ths of a second) between retry sequences for an SDLC link station if multiple retry sequences are specified.… |
| 1.3.6.1.2.1.41.1.2.2.1.11 | ColumnsdlcLSOperRETRIESn | read-only | current | This object reflects the current number of times that a retry sequence is repeated for an SDLC link station. A retry sequence is a series of retransmitted fram… |
| 1.3.6.1.2.1.41.1.2.2.1.12 | ColumnsdlcLSOperRNRLIMIT | read-only | current | This object reflects the current length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link station to remain in a busy (R… |
| 1.3.6.1.2.1.41.1.2.2.1.13 | ColumnsdlcLSOperDATMODE | read-only | current | This object reflects whether the current communications mode with the adjacent link station is two-way-alternate (half) or two-way-simultaneous (full). |
| 1.3.6.1.2.1.41.1.2.2.1.14 | ColumnsdlcLSOperLastModifyTime | read-only | current | This object describes the value of sysUpTime when this link station definition was last modified. If the link station has not been modified, then this value sh… |
| 1.3.6.1.2.1.41.1.2.2.1.15 | ColumnsdlcLSOperLastFailTime | read-only | current | This object describes the value of sysUpTime when this SDLC link station last failed. If the link station has not failed, then this value shall be zero. |
| 1.3.6.1.2.1.41.1.2.2.1.16 | ColumnsdlcLSOperLastFailCause | read-only | current | This enumerated object reflects the cause of the last failure of this SDLC link station. If the link station has not failed, then this object will have a value… |
| 1.3.6.1.2.1.41.1.2.2.1.17 | ColumnsdlcLSOperLastFailCtrlIn | read-only | current | This object reflects the last control octet or octets (depending on modulus) received by this SDLC link station at the time of the last failure. If the link st… |
| 1.3.6.1.2.1.41.1.2.2.1.18 | ColumnsdlcLSOperLastFailCtrlOut | read-only | current | This object reflects the last control octet or octets (depending on modulus) sent by this SDLC link station at the time of the last failure. If the link statio… |
| 1.3.6.1.2.1.41.1.2.2.1.19 | ColumnsdlcLSOperLastFailFRMRInfo | read-only | current | This object reflects the information field of the FRMR frame if the last failure for this SDLC link station was as a result of an invalid frame. Otherwise, thi… |
| 1.3.6.1.2.1.41.1.2.2.1.20 | ColumnsdlcLSOperLastFailREPLYTOs | read-only | current | This object reflects the number of times that the REPLYTO timer had expired for an SDLC link station at the time of the last failure. If the link station has n… |
| 1.3.6.1.2.1.41.1.2.2.1.21 | ColumnsdlcLSOperEcho | read-only | current | This object identifies whether the echo bit is in effect for this particular link station. |
| 1.3.6.1.2.1.41.1.2.2.1.22 | ColumnsdlcLSOperGPoll | read-only | current | This object describes the group poll address in effect for this link station instance. |
| 1.3.6.1.2.1.41.1.2.2.1.23 | ColumnsdlcLSOperSimRim | read-only | current | This object reflects the support for transmission and receipt of SIM and RIM control frames for the adjacent link station. The value of this object is set from… |
| 1.3.6.1.2.1.41.1.2.2.1.24 | ColumnsdlcLSOperXmitRcvCap | read-only | current | This object reflects the transmit-receive capabilities for the adjacent SDLC link station. The value of this object is the value of the transmit-receive capabi… |
| 1.3.6.1.2.1.41.1.2.3 | TablesdlcLSStatsTable | not-accessible | current | Each entry in this table contains statistics for a specific SDLC link station. |
| 1.3.6.1.2.1.41.1.2.3.1 | RowsdlcLSStatsEntry | not-accessible | current | A list of statistics for an SDLC link station. |
| 1.3.6.1.2.1.41.1.2.3.1.1 | ColumnsdlcLSStatsBLUsIn | read-only | current | This object reflects the total basic link units (BLUs; frames) received from an adjacent SDLC link station since link station startup. At link station startup … |
| 1.3.6.1.2.1.41.1.2.3.1.2 | ColumnsdlcLSStatsBLUsOut | read-only | current | This object reflects the total basic link units (BLUs; frames), transmitted to an adjacent SDLC link station since link station startup. At link station startu… |
| 1.3.6.1.2.1.41.1.2.3.1.3 | ColumnsdlcLSStatsOctetsIn | read-only | current | This object reflects the total octets received from an adjacent SDLC link station since link station startup. This object covers the address, control, and info… |
| 1.3.6.1.2.1.41.1.2.3.1.4 | ColumnsdlcLSStatsOctetsOut | read-only | current | This object reflects the total octets transmitted to an adjacent SDLC link station since link station startup. This object covers the address, control, and inf… |
| 1.3.6.1.2.1.41.1.2.3.1.5 | ColumnsdlcLSStatsPollsIn | read-only | current | This object reflects the total polls received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be … |
| 1.3.6.1.2.1.41.1.2.3.1.6 | ColumnsdlcLSStatsPollsOut | read-only | current | This object reflects the total polls sent to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initia… |
| 1.3.6.1.2.1.41.1.2.3.1.7 | ColumnsdlcLSStatsPollRspsOut | read-only | current | This object reflects the total number of poll responses sent to the adjacent SDLC link station since link station startup. This value includes I-frames that ar… |
| 1.3.6.1.2.1.41.1.2.3.1.8 | ColumnsdlcLSStatsPollRspsIn | read-only | current | This object reflects the total number of poll responses received from the adjacent SDLC link station since station startup. This value includes I-frames that a… |
| 1.3.6.1.2.1.41.1.2.3.1.9 | ColumnsdlcLSStatsLocalBusies | read-only | current | This object reflects the total number of times that the local SDLC link station has entered a busy state (RNR) since link station startup. At link station star… |
| 1.3.6.1.2.1.41.1.2.3.1.10 | ColumnsdlcLSStatsRemoteBusies | read-only | current | This object reflects the total number of times that an adjacent ( remote) SDLC link station has entered a busy state (RNR) since link station startup. At link … |
| 1.3.6.1.2.1.41.1.2.3.1.11 | ColumnsdlcLSStatsIFramesIn | read-only | current | This object reflects the total I-frames received from an adjacent SDLC link station since link station startup. At link station startup time, this object must … |
| 1.3.6.1.2.1.41.1.2.3.1.12 | ColumnsdlcLSStatsIFramesOut | read-only | current | This object reflects the total I-frames transmitted to an adjacent SDLC link station since link station startup. At link station startup time, this object must… |
| 1.3.6.1.2.1.41.1.2.3.1.13 | ColumnsdlcLSStatsUIFramesIn | read-only | current | This object reflects the total UI-frames received from an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.14 | ColumnsdlcLSStatsUIFramesOut | read-only | current | This object reflects the total UI-frames transmitted to an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.15 | ColumnsdlcLSStatsXIDsIn | read-only | current | This object reflects the total XID frames received from an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.16 | ColumnsdlcLSStatsXIDsOut | read-only | current | This object reflects the total XID frames transmitted to an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.17 | ColumnsdlcLSStatsTESTsIn | read-only | current | This object reflects the total TEST frames, commands or responses, received from an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.18 | ColumnsdlcLSStatsTESTsOut | read-only | current | This object reflects the total TEST frames, commands or responses, transmitted to an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.19 | ColumnsdlcLSStatsREJsIn | read-only | current | This object reflects the total REJ frames received from an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.20 | ColumnsdlcLSStatsREJsOut | read-only | current | This object reflects the total REJ frames transmitted to an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.21 | ColumnsdlcLSStatsFRMRsIn | read-only | current | This object reflects the total frame reject (FRMR) frames received from an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.22 | ColumnsdlcLSStatsFRMRsOut | read-only | current | This object reflects the total frame reject (FRMR) frames transmitted to an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.23 | ColumnsdlcLSStatsSIMsIn | read-only | current | This object reflects the total set initialization mode (SIM) frames received from an adjacent SDLC link station since link station startup. |
| 1.3.6.1.2.1.41.1.2.3.1.24 | ColumnsdlcLSStatsSIMsOut | read-only | current | This object reflects the total set initialization mode (SIM) frames transmitted to an adjacent SDLC link station since link station startup. At link station st… |
| 1.3.6.1.2.1.41.1.2.3.1.25 | ColumnsdlcLSStatsRIMsIn | read-only | current | This object reflects the total request initialization mode (RIM) frames received from an adjacent SDLC link station since link station startup. At link station… |
| 1.3.6.1.2.1.41.1.2.3.1.26 | ColumnsdlcLSStatsRIMsOut | read-only | current | This object reflects the total request initialization mode (RIM) frames transmitted to an adjacent SDLC link station since link station startup. At link statio… |
| 1.3.6.1.2.1.41.1.2.3.1.27 | ColumnsdlcLSStatsDISCIn | read-only | current | This object reflects the total number of disconnect (DISC) requests received from an adjacent SDLC link station since link station startup. At link station sta… |
| 1.3.6.1.2.1.41.1.2.3.1.28 | ColumnsdlcLSStatsDISCOut | read-only | current | This object reflects the total number of disconnect (DISC) requests transmited to an adjacent SDLC link station since link station startup. At link station sta… |
| 1.3.6.1.2.1.41.1.2.3.1.29 | ColumnsdlcLSStatsUAIn | read-only | current | This object reflects the total number of unnumbered acknowledgements (UA) requests received from an adjacent SDLC link station since link station startup. At l… |
| 1.3.6.1.2.1.41.1.2.3.1.30 | ColumnsdlcLSStatsUAOut | read-only | current | This object reflects the total number of unnumbered acknowledgements (UA) requests transmited to an adjacent SDLC link station since link station startup. At l… |
| 1.3.6.1.2.1.41.1.2.3.1.31 | ColumnsdlcLSStatsDMIn | read-only | current | This object reflects the total number of disconnect mode (DM) requests received from an adjacent SDLC link station since link station startup. At link station … |
| 1.3.6.1.2.1.41.1.2.3.1.32 | ColumnsdlcLSStatsDMOut | read-only | current | This object reflects the total number of disconnect mode (DM) requests transmited to an adjacent SDLC link station since link station startup. At link station … |
| 1.3.6.1.2.1.41.1.2.3.1.33 | ColumnsdlcLSStatsSNRMIn | read-only | current | This object reflects the total number of set normal response mode (SNRM/SNRME) requests received from an adjacent SDLC link station since link station startup.… |
| 1.3.6.1.2.1.41.1.2.3.1.34 | ColumnsdlcLSStatsSNRMOut | read-only | current | This object reflects the total number of set normal response mode (SNRM/SNRME) requests transmited to an adjacent SDLC link station since link station startup.… |
| 1.3.6.1.2.1.41.1.2.3.1.35 | ColumnsdlcLSStatsProtocolErrs | read-only | current | This object reflects the total occurrences, since link station startup, where this SDLC link station has inactivated the link as a result of receiving a frame … |
| 1.3.6.1.2.1.41.1.2.3.1.36 | ColumnsdlcLSStatsActivityTOs | read-only | current | This object reflects the total occurrences, since startup, where this SDLC link station has inactivated the link as a result of no activity on the link. At lin… |
| 1.3.6.1.2.1.41.1.2.3.1.37 | ColumnsdlcLSStatsRNRLIMITs | read-only | current | This object reflects the total occurrences, since startup, where this SDLC link station has inactivated the link as a result of its RNRLIMIT timer expiring. At… |
| 1.3.6.1.2.1.41.1.2.3.1.38 | ColumnsdlcLSStatsRetriesExps | read-only | current | This object reflects the total occurrences, since startup, where this SDLC link station has inactivated the link as a result of a retry sequence being exhauste… |
| 1.3.6.1.2.1.41.1.2.3.1.39 | ColumnsdlcLSStatsRetransmitsIn | read-only | current | This object reflects the total number of information frames retransmitted by the remote link station because the N(s) received from that link station indicated… |
| 1.3.6.1.2.1.41.1.2.3.1.40 | ColumnsdlcLSStatsRetransmitsOut | read-only | current | This object reflects the total number of information frames retransmitted to a remote link station because the N(r) received from that link station indicated t… |
| 1.3.6.1.2.1.41.1.3 | NodesdlcTraps | |||
| 1.3.6.1.2.1.41.1.3.1 | NotificationsdlcPortStatusChange | current | This trap indicates that the state of an SDLC port has transitioned to active or inactive. | |
| 1.3.6.1.2.1.41.1.3.2 | NotificationsdlcLSStatusChange | current | This trap indicates that the state of an SDLC link station has transitioned to contacted or discontacted. | |
| 1.3.6.1.2.1.41.1.4 | NodesdlcConformance | |||
| 1.3.6.1.2.1.41.1.4.1 | NodesdlcCompliances | |||
| 1.3.6.1.2.1.41.1.4.1.1 | CompliancesdlcCoreCompliance | read-only | current | The core compliance statement for all SDLC nodes. |
| 1.3.6.1.2.1.41.1.4.1.2 | CompliancesdlcPrimaryCompliance | read-only | current | The compliance statement for all nodes that are performing the role of a Primary link station. |
| 1.3.6.1.2.1.41.1.4.1.3 | CompliancesdlcPrimaryMultipointCompliance | read-only | current | The compliance statement for all nodes that are performing the role of a primary link station on a multipoint line. |
| 1.3.6.1.2.1.41.1.4.2 | NodesdlcGroups | |||
| 1.3.6.1.2.1.41.1.4.2.1 | NodesdlcCoreGroups | |||
| 1.3.6.1.2.1.41.1.4.2.1.1 | GroupsdlcCorePortAdminGroup | current | The sdlcCorePortAdminGroup defines objects which are common to the PortAdmin group of all compliant link stations. | |
| 1.3.6.1.2.1.41.1.4.2.1.2 | GroupsdlcCorePortOperGroup | current | The sdlcCorePortOperGroup defines objects which are common to the PortOper group of all compliant link stations. | |
| 1.3.6.1.2.1.41.1.4.2.1.3 | GroupsdlcCorePortStatsGroup | current | The sdlcCorePortStatsGroup defines objects which are common to the PortStats group of all compliant link stations. | |
| 1.3.6.1.2.1.41.1.4.2.1.4 | GroupsdlcCoreLSAdminGroup | current | The sdlcCorePortAdminGroup defines objects which are common to the PortAdmin group of all compliant link stations. | |
| 1.3.6.1.2.1.41.1.4.2.1.5 | GroupsdlcCoreLSOperGroup | current | The sdlcCorePortOperGroup defines objects which are common to the PortOper group of all compliant link stations. | |
| 1.3.6.1.2.1.41.1.4.2.1.6 | GroupsdlcCoreLSStatsGroup | current | The sdlcCorePortStatsGroup defines objects which are common to the PortStats group of all compliant link stations. | |
| 1.3.6.1.2.1.41.1.4.2.2 | NodesdlcPrimaryGroups | |||
| 1.3.6.1.2.1.41.1.4.2.2.1 | GroupsdlcPrimaryGroup | current | The sdlcPrimaryGroup defines objects which are common to all compliant primary link stations. | |
| 1.3.6.1.2.1.41.1.4.2.2.2 | GroupsdlcPrimaryMultipointGroup | current | The sdlcPrimaryMultipointGroup defines objects which are common to all compliant primary link stations that are in a multipoint topology. |