SNMP-REPEATER-MIB
68 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| RFC1213-MIB | DisplayString mib-2 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.22 | NodesnmpDot3RptrMgt | |||
| 1.3.6.1.2.1.22.1 | NoderptrBasicPackage | |||
| 1.3.6.1.2.1.22.1 | NoderptrHealth | The rptrHealth trap conveys information related to the operational status of the repeater. This trap is sent either when the value of rptrOperStatus changes, o… | ||
| 1.3.6.1.2.1.22.1.1 | NoderptrRptrInfo | |||
| 1.3.6.1.2.1.22.1.1.1 | ScalarrptrGroupCapacity | read-only | mandatory | The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the … |
| 1.3.6.1.2.1.22.1.1.2 | ScalarrptrOperStatus | read-only | mandatory | The rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the s… |
| 1.3.6.1.2.1.22.1.1.3 | ScalarrptrHealthText | read-only | mandatory | The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide deta… |
| 1.3.6.1.2.1.22.1.1.4 | ScalarrptrReset | read-write | mandatory | Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this object to noReset(1) has no effec… |
| 1.3.6.1.2.1.22.1.1.5 | ScalarrptrNonDisruptTest | read-write | mandatory | Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The na… |
| 1.3.6.1.2.1.22.1.1.6 | ScalarrptrTotalPartitionedPorts | read-only | mandatory | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have t… |
| 1.3.6.1.2.1.22.1.2 | NoderptrGroupInfo | |||
| 1.3.6.1.2.1.22.1.2.1 | TablerptrGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.2.1.22.1.2.1.1 | RowrptrGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.2.1.22.1.2.1.1.1 | ColumnrptrGroupIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.2.1.22.1.2.1.1.2 | ColumnrptrGroupDescr | read-only | mandatory | A textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group … |
| 1.3.6.1.2.1.22.1.2.1.1.3 | ColumnrptrGroupObjectID | read-only | mandatory | The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-fo… |
| 1.3.6.1.2.1.22.1.2.1.1.4 | ColumnrptrGroupOperStatus | read-only | mandatory | An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/o… |
| 1.3.6.1.2.1.22.1.2.1.1.5 | ColumnrptrGroupLastOperStatusChange | read-only | mandatory | An object that contains the value of sysUpTime at the time that the value of the rptrGroupOperStatus object for this group last changed. A value of zero indica… |
| 1.3.6.1.2.1.22.1.2.1.1.6 | ColumnrptrGroupPortCapacity | read-only | mandatory | The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbe… |
| 1.3.6.1.2.1.22.1.3 | NoderptrPortInfo | |||
| 1.3.6.1.2.1.22.1.3.1 | TablerptrPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.2.1.22.1.3.1.1 | RowrptrPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.2.1.22.1.3.1.1.1 | ColumnrptrPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.1.3.1.1.2 | ColumnrptrPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the … |
| 1.3.6.1.2.1.22.1.3.1.1.3 | ColumnrptrPortAdminStatus | read-write | mandatory | Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto… |
| 1.3.6.1.2.1.22.1.3.1.1.4 | ColumnrptrPortAutoPartitionState | read-only | mandatory | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par… |
| 1.3.6.1.2.1.22.1.3.1.1.5 | ColumnrptrPortOperStatus | read-only | mandatory | This object indicates the port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible de… |
| 1.3.6.1.2.1.22.2 | NoderptrGroupChange | This trap is sent when a change occurs in the group structure of a repeater. This occurs only when a group is logically or physically removed from or added to … | ||
| 1.3.6.1.2.1.22.2 | NoderptrMonitorPackage | |||
| 1.3.6.1.2.1.22.2.1 | NoderptrMonitorRptrInfo | |||
| 1.3.6.1.2.1.22.2.1.1 | ScalarrptrMonitorTransmitCollisions | read-only | mandatory | This counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2, IE… |
| 1.3.6.1.2.1.22.2.2 | NoderptrMonitorGroupInfo | |||
| 1.3.6.1.2.1.22.2.2.1 | TablerptrMonitorGroupTable | not-accessible | mandatory | Table of performance and error statistics for the groups. |
| 1.3.6.1.2.1.22.2.2.1.1 | RowrptrMonitorGroupEntry | not-accessible | mandatory | An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a mean… |
| 1.3.6.1.2.1.22.2.2.1.1.1 | ColumnrptrMonitorGroupIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. |
| 1.3.6.1.2.1.22.2.2.1.1.2 | ColumnrptrMonitorGroupTotalFrames | read-only | mandatory | The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were … |
| 1.3.6.1.2.1.22.2.2.1.1.3 | ColumnrptrMonitorGroupTotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the… |
| 1.3.6.1.2.1.22.2.2.1.1.4 | ColumnrptrMonitorGroupTotalErrors | read-only | mandatory | The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the rptrMonitorPortTotalErrors… |
| 1.3.6.1.2.1.22.2.3 | NoderptrMonitorPortInfo | |||
| 1.3.6.1.2.1.22.2.3.1 | TablerptrMonitorPortTable | not-accessible | mandatory | Table of performance and error statistics for the ports. |
| 1.3.6.1.2.1.22.2.3.1.1 | RowrptrMonitorPortEntry | not-accessible | mandatory | An entry in the table, containing performance and error statistics for a single port. |
| 1.3.6.1.2.1.22.2.3.1.1.1 | ColumnrptrMonitorPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.2.3.1.1.2 | ColumnrptrMonitorPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. |
| 1.3.6.1.2.1.22.2.3.1.1.3 | ColumnrptrMonitorPortReadableFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t… |
| 1.3.6.1.2.1.22.2.3.1.1.4 | ColumnrptrMonitorPortReadableOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re… |
| 1.3.6.1.2.1.22.2.3.1.1.5 | ColumnrptrMonitorPortFCSErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass… |
| 1.3.6.1.2.1.22.2.3.1.1.6 | ColumnrptrMonitorPortAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte… |
| 1.3.6.1.2.1.22.2.3.1.1.7 | ColumnrptrMonitorPortFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMo… |
| 1.3.6.1.2.1.22.2.3.1.1.8 | ColumnrptrMonitorPortShortEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b… |
| 1.3.6.1.2.1.22.2.3.1.1.9 | ColumnrptrMonitorPortRunts | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi… |
| 1.3.6.1.2.1.22.2.3.1.1.10 | ColumnrptrMonitorPortCollisions | read-only | mandatory | This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. The approximate m… |
| 1.3.6.1.2.1.22.2.3.1.1.11 | ColumnrptrMonitorPortLateEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 St… |
| 1.3.6.1.2.1.22.2.3.1.1.12 | ColumnrptrMonitorPortVeryLongEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9… |
| 1.3.6.1.2.1.22.2.3.1.1.13 | ColumnrptrMonitorPortDataRateMismatches | read-only | mandatory | This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte… |
| 1.3.6.1.2.1.22.2.3.1.1.14 | ColumnrptrMonitorPortAutoPartitions | read-only | mandatory | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie… |
| 1.3.6.1.2.1.22.2.3.1.1.15 | ColumnrptrMonitorPortTotalErrors | read-only | mandatory | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: r… |
| 1.3.6.1.2.1.22.3 | NoderptrAddrTrackPackage | |||
| 1.3.6.1.2.1.22.3 | NoderptrResetEvent | The rptrResetEvent trap conveys information related to the operational status of the repeater. This trap is sent on completion of a repeater reset action. A re… | ||
| 1.3.6.1.2.1.22.3.1 | NoderptrAddrTrackRptrInfo | |||
| 1.3.6.1.2.1.22.3.2 | NoderptrAddrTrackGroupInfo | |||
| 1.3.6.1.2.1.22.3.3 | NoderptrAddrTrackPortInfo | |||
| 1.3.6.1.2.1.22.3.3.1 | TablerptrAddrTrackTable | not-accessible | mandatory | Table of address mapping information about the ports. |
| 1.3.6.1.2.1.22.3.3.1.1 | RowrptrAddrTrackEntry | not-accessible | mandatory | An entry in the table, containing address mapping information about a single port. |
| 1.3.6.1.2.1.22.3.3.1.1.1 | ColumnrptrAddrTrackGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.2.1.22.3.3.1.1.2 | ColumnrptrAddrTrackPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. |
| 1.3.6.1.2.1.22.3.3.1.1.3 | ColumnrptrAddrTrackLastSourceAddress | read-only | deprecated | This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. This object has been deprec… |
| 1.3.6.1.2.1.22.3.3.1.1.4 | ColumnrptrAddrTrackSourceAddrChanges | read-only | mandatory | This counter is incremented by one for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. This may indicate whether a link … |
| 1.3.6.1.2.1.22.3.3.1.1.5 | ColumnrptrAddrTrackNewLastSrcAddress | read-only | mandatory | This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. If no frames have been rece… |