MIB Viewer

SNMPv2-PARTY-MIB

79 objects
The MIB module describing SNMPv2 parties.
Imported Objects
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE snmpModules UInteger32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.6.3.3IdentitypartyMIBThe MIB module describing SNMPv2 parties.
1.3.6.1.6.3.3.1NodepartyAdmin
1.3.6.1.6.3.3.1.1NodepartyProtocols
1.3.6.1.6.3.3.1.1.1NodenoAuth
1.3.6.1.6.3.3.1.1.2NodenoPriv
1.3.6.1.6.3.3.1.1.3NodedesPrivProtocol
1.3.6.1.6.3.3.1.1.4Nodev2md5AuthProtocol
1.3.6.1.6.3.3.1.2NodetemporalDomains
1.3.6.1.6.3.3.1.2.1NodecurrentTime
1.3.6.1.6.3.3.1.2.2NoderestartTime
1.3.6.1.6.3.3.1.2.3NodecacheTime
1.3.6.1.6.3.3.1.3NodeinitialPartyId
1.3.6.1.6.3.3.1.4NodeinitialContextId
1.3.6.1.6.3.3.2NodepartyMIBObjects
1.3.6.1.6.3.3.2.1NodesnmpParties
1.3.6.1.6.3.3.2.1.1TablepartyTablenot-accessiblecurrentThe SNMPv2 Party database.
1.3.6.1.6.3.3.2.1.1.1RowpartyEntrynot-accessiblecurrentLocally held information about a particular SNMPv2 party.
1.3.6.1.6.3.3.2.1.1.1.1ColumnpartyIdentitynot-accessiblecurrentA party identifier uniquely identifying a particular SNMPv2 party.
1.3.6.1.6.3.3.2.1.1.1.2ColumnpartyIndexread-onlycurrentA unique value for each SNMPv2 party. The value for each SNMPv2 party must remain constant at least from one re-initialization of the entity's network manageme…
1.3.6.1.6.3.3.2.1.1.1.3ColumnpartyTDomainread-createcurrentIndicates the kind of transport service by which the party receives network management traffic.
1.3.6.1.6.3.3.2.1.1.1.4ColumnpartyTAddressread-createcurrentThe transport service address by which the party receives network management traffic, formatted according to the corresponding value of partyTDomain. For snmpU…
1.3.6.1.6.3.3.2.1.1.1.5ColumnpartyMaxMessageSizeread-createcurrentThe maximum length in octets of a SNMPv2 message which this party will accept. For parties which execute at an agent, the agent initializes this object to the …
1.3.6.1.6.3.3.2.1.1.1.6ColumnpartyLocalread-createcurrentAn indication of whether this party executes at this SNMPv2 entity. If this object has a value of true(1), then the SNMPv2 entity will listen for SNMPv2 messag…
1.3.6.1.6.3.3.2.1.1.1.7ColumnpartyAuthProtocolread-createcurrentThe authentication protocol by which all messages generated by the party are authenticated as to origin and integrity. The value noAuth signifies that messages…
1.3.6.1.6.3.3.2.1.1.1.8ColumnpartyAuthClockread-createcurrentThe authentication clock which represents the local notion of the current time specific to the party. This value must not be decremented unless the party's pri…
1.3.6.1.6.3.3.2.1.1.1.9ColumnpartyAuthPrivateread-createcurrentAn encoding of the party's private authentication key which may be needed to support the authentication protocol. Although the value of this variable may be al…
1.3.6.1.6.3.3.2.1.1.1.10ColumnpartyAuthPublicread-createcurrentA publically-readable value for the party. Depending on the party's authentication protocol, this value may be needed to support the party's authentication pro…
1.3.6.1.6.3.3.2.1.1.1.11ColumnpartyAuthLifetimeread-createcurrentThe lifetime (in units of seconds) which represents an administrative upper bound on acceptable delivery delay for protocol messages generated by the party. On…
1.3.6.1.6.3.3.2.1.1.1.12ColumnpartyPrivProtocolread-createcurrentThe privacy protocol by which all protocol messages received by the party are protected from disclosure. The value noPriv signifies that messages received by t…
1.3.6.1.6.3.3.2.1.1.1.13ColumnpartyPrivPrivateread-createcurrentAn encoding of the party's private encryption key which may be needed to support the privacy protocol. Although the value of this variable may be altered by a …
1.3.6.1.6.3.3.2.1.1.1.14ColumnpartyPrivPublicread-createcurrentA publically-readable value for the party. Depending on the party's privacy protocol, this value may be needed to support the party's privacy protocol. Alterna…
1.3.6.1.6.3.3.2.1.1.1.15ColumnpartyCloneFromread-createcurrentThe identity of a party to clone authentication and privacy parameters from. When read, the value { 0 0 } is returned. This value must be written exactly once,…
1.3.6.1.6.3.3.2.1.1.1.16ColumnpartyStorageTyperead-createcurrentThe storage type for this conceptual row in the partyTable.
1.3.6.1.6.3.3.2.1.1.1.17ColumnpartyStatusread-createcurrentThe status of this conceptual row in the partyTable. A party is not qualified for activation until instances of all columns of its partyEntry row have an appro…
1.3.6.1.6.3.3.2.2NodesnmpContexts
1.3.6.1.6.3.3.2.2.1TablecontextTablenot-accessiblecurrentThe SNMPv2 Context database.
1.3.6.1.6.3.3.2.2.1.1RowcontextEntrynot-accessiblecurrentLocally held information about a particular SNMPv2 context.
1.3.6.1.6.3.3.2.2.1.1.1ColumncontextIdentitynot-accessiblecurrentA context identifier uniquely identifying a particular SNMPv2 context.
1.3.6.1.6.3.3.2.2.1.1.2ColumncontextIndexread-onlycurrentA unique value for each SNMPv2 context. The value for each SNMPv2 context must remain constant at least from one re-initialization of the entity's network mana…
1.3.6.1.6.3.3.2.2.1.1.3ColumncontextLocalread-createcurrentAn indication of whether this context is realized by this SNMPv2 entity.
1.3.6.1.6.3.3.2.2.1.1.4ColumncontextViewIndexread-createcurrentIf the value of an instance of this object is zero, then this corresponding conceptual row in the contextTable refers to a SNMPv2 context which identifies a pr…
1.3.6.1.6.3.3.2.2.1.1.5ColumncontextLocalEntityread-createcurrentIf the value of the corresponding instance of the contextViewIndex is greater than zero, then the value of an instance of this object identifies the local enti…
1.3.6.1.6.3.3.2.2.1.1.6ColumncontextLocalTimeread-createcurrentIf the value of the corresponding instance of the contextViewIndex is greater than zero, then the value of an instance of this object identifies the temporal c…
1.3.6.1.6.3.3.2.2.1.1.7ColumncontextProxyDstPartyread-createcurrentIf the value of the corresponding instance of the contextViewIndex is equal to zero, then the value of an instance of this object identifies a SNMPv2 party whi…
1.3.6.1.6.3.3.2.2.1.1.8ColumncontextProxySrcPartyread-createcurrentIf the value of the corresponding instance of the contextViewIndex is equal to zero, then the value of an instance of this object identifies a SNMPv2 party whi…
1.3.6.1.6.3.3.2.2.1.1.9ColumncontextProxyContextread-createcurrentIf the value of the corresponding instance of the contextViewIndex is equal to zero, then the value of an instance of this object identifies the context of a p…
1.3.6.1.6.3.3.2.2.1.1.10ColumncontextStorageTyperead-createcurrentThe storage type for this conceptual row in the contextTable.
1.3.6.1.6.3.3.2.2.1.1.11ColumncontextStatusread-createcurrentThe status of this conceptual row in the contextTable. A context is not qualified for activation until instances of all corresponding columns have the appropri…
1.3.6.1.6.3.3.2.3NodesnmpAccess
1.3.6.1.6.3.3.2.3.1TableaclTablenot-accessiblecurrentThe access privileges database.
1.3.6.1.6.3.3.2.3.1.1RowaclEntrynot-accessiblecurrentThe access privileges for a particular subject SNMPv2 party when asking a particular target SNMPv2 party to access a particular SNMPv2 context.
1.3.6.1.6.3.3.2.3.1.1.1ColumnaclTargetnot-accessiblecurrentThe value of an instance of this object identifies a SNMPv2 party which is the target of an access control policy, and has the same value as the instance of th…
1.3.6.1.6.3.3.2.3.1.1.2ColumnaclSubjectnot-accessiblecurrentThe value of an instance of this object identifies a SNMPv2 party which is the subject of an access control policy, and has the same value as the instance of t…
1.3.6.1.6.3.3.2.3.1.1.3ColumnaclResourcesnot-accessiblecurrentThe value of an instance of this object identifies a SNMPv2 context in an access control policy, and has the same value as the instance of the contextIndex obj…
1.3.6.1.6.3.3.2.3.1.1.4ColumnaclPrivilegesread-createcurrentThe access privileges which govern what management operations a particular target party may perform with respect to a particular SNMPv2 context when requested …
1.3.6.1.6.3.3.2.3.1.1.5ColumnaclStorageTyperead-createcurrentThe storage type for this conceptual row in the aclTable.
1.3.6.1.6.3.3.2.3.1.1.6ColumnaclStatusread-createcurrentThe status of this conceptual row in the aclTable.
1.3.6.1.6.3.3.2.4NodesnmpViews
1.3.6.1.6.3.3.2.4.1TableviewTablenot-accessiblecurrentLocally held information about the MIB views known to this SNMPv2 entity. Each SNMPv2 context which is locally accessible has a single MIB view which is define…
1.3.6.1.6.3.3.2.4.1.1RowviewEntrynot-accessiblecurrentInformation on a particular family of view subtrees included in or excluded from a particular SNMPv2 context's MIB view. Implementations must not restrict the …
1.3.6.1.6.3.3.2.4.1.1.1ColumnviewIndexnot-accessiblecurrentA unique value for each MIB view. The value for each MIB view must remain constant at least from one re-initialization of the entity's network management syste…
1.3.6.1.6.3.3.2.4.1.1.2ColumnviewSubtreenot-accessiblecurrentA MIB subtree.
1.3.6.1.6.3.3.2.4.1.1.3ColumnviewMaskread-createcurrentThe bit mask which, in combination with the corresponding instance of viewSubtree, defines a family of view subtrees. Each bit of this bit mask corresponds to …
1.3.6.1.6.3.3.2.4.1.1.4ColumnviewTyperead-createcurrentThe status of a particular family of view subtrees within the particular SNMPv2 context's MIB view. The value 'included(1)' indicates that the corresponding in…
1.3.6.1.6.3.3.2.4.1.1.5ColumnviewStorageTyperead-createcurrentThe storage type for this conceptual row in the viewTable.
1.3.6.1.6.3.3.2.4.1.1.6ColumnviewStatusread-createcurrentThe status of this conceptual row in the viewTable.
1.3.6.1.6.3.3.3NodepartyMIBConformance
1.3.6.1.6.3.3.3.1NodepartyMIBCompliances
1.3.6.1.6.3.3.3.1.1ComplianceunSecurableCompliancecurrentThe compliance statement for SNMPv2 entities which implement the Party MIB, but do not support any authentication or privacy protocols (i.e., only the noAuth a…
1.3.6.1.6.3.3.3.1.2CompliancepartyNoPrivacyCompliancecurrentThe compliance statement for SNMPv2 entities which implement the Party MIB, and support an authentication protocol, but do not support any privacy protocols (i…
1.3.6.1.6.3.3.3.1.3CompliancepartyPrivacyCompliancecurrentThe compliance statement for SNMPv2 entities which implement the Party MIB, support an authentication protocol, and support a privacy protocol ONLY for the pur…
1.3.6.1.6.3.3.3.1.4CompliancefullPrivacyCompliancecurrentThe compliance statement for SNMPv2 entities which implement the Party MIB, support an authentication protocol, and support a privacy protocol without restrict…
1.3.6.1.6.3.3.3.2NodepartyMIBGroups
1.3.6.1.6.3.3.3.2.1GrouppartyMIBGroupcurrentThe collection of objects allowing the description and configuration of SNMPv2 parties. Note that objects which support proxy relationships are not included in…
Type Definitions
NameSyntaxStatusDescription
ClockUInteger32currentA party's authentication clock - a non-negative integer which is incremented as specified/allowed by the party's Authentication Protocol. For noAuth, a party's authentication clock is unused and its value is undefined. …
ContextcurrentDenotes a SNMPv2 context identifier. Note that agents may impose implementation limitations on the length of OIDs used to identify Contexts. As such, management stations creating new contexts should be aware that using …
PartycurrentDenotes a SNMPv2 party identifier. Note that agents may impose implementation limitations on the length of OIDs used to identify Parties. As such, management stations creating new parties should be aware that using an e…
StorageTypeINTEGER { other(1), volatile(2), nonVolatile(3), permanent(4) }currentDescribes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is nonVolatile(3) is backed up by stable storage. A row which is permanent(4) cannot be changed nor delet…
TAddressOCTET STRINGcurrentDenotes a transport service address. For snmpUDPDomain, a TAddress is 6 octets long, the initial 4 octets containing the IP-address in network-byte order and the last 2 containing the UDP port in network-byte order. Con…