SNR-ERD-MIB
429 objects
The common MIB module for SNR-ERD-4, SNR-ERD-5, SNMP-CARD-801, SNMP-CARD-105
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.40418 | Nodesnr | |||
| 1.3.6.1.4.1.40418.2 | IdentitysnrErd | The common MIB module for SNR-ERD-4, SNR-ERD-5, SNMP-CARD-801, SNMP-CARD-105 | ||
| 1.3.6.1.4.1.40418.2.6 | Nodeerd | |||
| 1.3.6.1.4.1.40418.2.6.0 | NodeerdTraps | |||
| 1.3.6.1.4.1.40418.2.6.0.1 | NotificationerdDi1Alarm | current | Input 1 Alarm fires | |
| 1.3.6.1.4.1.40418.2.6.0.2 | NotificationerdDi1Release | current | Input 1 Alarm released | |
| 1.3.6.1.4.1.40418.2.6.0.3 | NotificationerdDi2Alarm | current | Input 2 Alarm fires | |
| 1.3.6.1.4.1.40418.2.6.0.4 | NotificationerdDi2Release | current | Input 2 Alarm released | |
| 1.3.6.1.4.1.40418.2.6.0.5 | NotificationerdDi3Alarm | current | Input 3 Alarm fires | |
| 1.3.6.1.4.1.40418.2.6.0.6 | NotificationerdDi3Release | current | Input 3 Alarm released | |
| 1.3.6.1.4.1.40418.2.6.0.7 | NotificationerdDi4Alarm | current | Input 4 Alarm fires | |
| 1.3.6.1.4.1.40418.2.6.0.8 | NotificationerdDi4Release | current | Input 4 Alarm released | |
| 1.3.6.1.4.1.40418.2.6.0.9 | NotificationerdDi5Alarm | current | Input 5 Alarm fires | |
| 1.3.6.1.4.1.40418.2.6.0.10 | NotificationerdDi5Release | current | Input 5 Alarm released | |
| 1.3.6.1.4.1.40418.2.6.0.50 | NotificationerdUSenseAlarm | current | Signifies that Phase sensor Alarm fires | |
| 1.3.6.1.4.1.40418.2.6.0.51 | NotificationerdUSenseRelease | current | Signifies that Phase sensor Alarm released | |
| 1.3.6.1.4.1.40418.2.6.0.70 | NotificationerdReloutOn | current | Signifies that Rele was swithed on by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.71 | NotificationerdReloutOff | current | Signifies that Rele was swithed off by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.72 | NotificationerdDo1On | current | Signifies that Output 1 was swithed on by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.73 | NotificationerdDo1Off | current | Signifies that Output 1 was swithed off by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.74 | NotificationerdDo2On | current | Signifies that Output 2 was swithed on by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.75 | NotificationerdDo2Off | current | Signifies that Output 2 was swithed off by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.76 | NotificationerdDo3On | current | Signifies that Output 3 was swithed on by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.77 | NotificationerdDo3Off | current | Signifies that Output 3 was swithed off by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.78 | NotificationerdDo4On | current | Signifies that Output 4 was swithed on by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.79 | NotificationerdDo4Off | current | Signifies that Output 4 was swithed off by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.80 | NotificationerdDo5On | current | Signifies that Output 5 was swithed on by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.81 | NotificationerdDo5Off | current | Signifies that Output 5 was swithed off by Thermostat or Gigrostat mode | |
| 1.3.6.1.4.1.40418.2.6.0.120 | NotificationerdTemperatureCriticalMin | current | Temperature critical minimum | |
| 1.3.6.1.4.1.40418.2.6.0.121 | NotificationerdTemperatureNormal | current | Temperature normal | |
| 1.3.6.1.4.1.40418.2.6.0.122 | NotificationerdTemperatureCriticalMax | current | Temperature critical maximum | |
| 1.3.6.1.4.1.40418.2.6.0.123 | NotificationerdHumidityCriticalMin | current | Humidity critical minimum | |
| 1.3.6.1.4.1.40418.2.6.0.124 | NotificationerdHumidityNormal | current | Humidity normal | |
| 1.3.6.1.4.1.40418.2.6.0.125 | NotificationerdHumidityCriticalMax | current | Humidity critical maximum | |
| 1.3.6.1.4.1.40418.2.6.0.130 | NotificationerdAdcCriticalMin | current | ADC IN critical minimum | |
| 1.3.6.1.4.1.40418.2.6.0.131 | NotificationerdAdcNormal | current | ADC IN normal | |
| 1.3.6.1.4.1.40418.2.6.0.132 | NotificationerdAdcCriticalMax | current | ADC IN critical maximum | |
| 1.3.6.1.4.1.40418.2.6.0.133 | NotificationerdAdcOvercurrent | current | ADC IN was overloaded by current | |
| 1.3.6.1.4.1.40418.2.6.0.140 | NotificationerdHumSensorAlarm | current | Humidity alarm | |
| 1.3.6.1.4.1.40418.2.6.0.141 | NotificationerdHumSensorRelease | current | Humidity release | |
| 1.3.6.1.4.1.40418.2.6.0.150 | NotificationerdTask1Done | current | Task 1 done | |
| 1.3.6.1.4.1.40418.2.6.0.151 | NotificationerdTask2Done | current | Task 2 done | |
| 1.3.6.1.4.1.40418.2.6.0.152 | NotificationerdTask3Done | current | Task 3 done | |
| 1.3.6.1.4.1.40418.2.6.0.153 | NotificationerdTask4Done | current | Task 4 done | |
| 1.3.6.1.4.1.40418.2.6.0.154 | NotificationerdTask5Done | current | Task 5 done | |
| 1.3.6.1.4.1.40418.2.6.0.155 | NotificationerdTask6Done | current | Task 6 done | |
| 1.3.6.1.4.1.40418.2.6.0.156 | NotificationerdTask7Done | current | Task 7 done | |
| 1.3.6.1.4.1.40418.2.6.0.157 | NotificationerdTask8Done | current | Task 8 done | |
| 1.3.6.1.4.1.40418.2.6.0.158 | NotificationerdTask9Done | current | Task 9 done | |
| 1.3.6.1.4.1.40418.2.6.0.159 | NotificationerdTask10Done | current | Task 10 done | |
| 1.3.6.1.4.1.40418.2.6.0.160 | NotificationerdPingLost | current | Ping lost | |
| 1.3.6.1.4.1.40418.2.6.0.197 | NotificationerdBatteryChargeLow | deprecated | Battery charge is low **NOTE: this object is deprecated | |
| 1.3.6.1.4.1.40418.2.6.0.198 | NotificationerdUpsStartBatteryTest | current | UPS start battery test | |
| 1.3.6.1.4.1.40418.2.6.0.199 | NotificationerdUpsStopBatteryTest | current | UPS stop battery test | |
| 1.3.6.1.4.1.40418.2.6.0.200 | NotificationerdUpsUtilityFail | current | UPS utility fail | |
| 1.3.6.1.4.1.40418.2.6.0.201 | NotificationerdUpsUtilityOk | current | UPS utility OK | |
| 1.3.6.1.4.1.40418.2.6.0.202 | NotificationerdUpsOn | current | UPS On | |
| 1.3.6.1.4.1.40418.2.6.0.203 | NotificationerdUpsOff | current | UPS Off | |
| 1.3.6.1.4.1.40418.2.6.0.204 | NotificationerdUpsLoadCritical | current | UPS critical load | |
| 1.3.6.1.4.1.40418.2.6.0.205 | NotificationerdUpsLoadNormal | current | UPS normal load | |
| 1.3.6.1.4.1.40418.2.6.0.206 | NotificationerdUpsBatteryVoltageFull | current | UPS battery voltage is full | |
| 1.3.6.1.4.1.40418.2.6.0.207 | NotificationerdUpsBatteryVoltageNormal | current | UPS battery voltage is normal | |
| 1.3.6.1.4.1.40418.2.6.0.208 | NotificationerdUpsBatteryVoltageCritical | current | UPS battery voltage is critical | |
| 1.3.6.1.4.1.40418.2.6.0.209 | NotificationerdUpsBatteryDischarged | current | UPS battery is discharged | |
| 1.3.6.1.4.1.40418.2.6.0.210 | NotificationerdInternetDisconnected | current | Internet is disconnected | |
| 1.3.6.1.4.1.40418.2.6.0.211 | NotificationerdInternetRestored | current | Internet is restored | |
| 1.3.6.1.4.1.40418.2.6.0.220 | NotificationerdSmtpDisconnected | current | SMTP is disconnected | |
| 1.3.6.1.4.1.40418.2.6.0.221 | NotificationerdSmtpRestored | current | SMTP is restored | |
| 1.3.6.1.4.1.40418.2.6.0.230 | NotificationerdEthernetDisconnected | current | Ethernet is disconnected | |
| 1.3.6.1.4.1.40418.2.6.0.231 | NotificationerdEthernetRestored | current | Ethernet is restored | |
| 1.3.6.1.4.1.40418.2.6.0.240 | NotificationerdAuthentificationFailed | current | Authentification is failed | |
| 1.3.6.1.4.1.40418.2.6.0.241 | NotificationerdAuthentificationSucceed | current | Authentification is succeed | |
| 1.3.6.1.4.1.40418.2.6.0.250 | NotificationerdStart | current | ERD start | |
| 1.3.6.1.4.1.40418.2.6.0.300 | NotificationerdLogicDone | current | Logic done | |
| 1.3.6.1.4.1.40418.2.6.1 | NodeerdMeasurements | |||
| 1.3.6.1.4.1.40418.2.6.1.1 | NodeerdOneWire | |||
| 1.3.6.1.4.1.40418.2.6.1.1.1 | TableerdDtsTable | not-accessible | current | A list of temperature sensors values |
| 1.3.6.1.4.1.40418.2.6.1.1.1.1 | RowerdDtsEntry | not-accessible | current | An entry (conceptual row) in the dtsTable |
| 1.3.6.1.4.1.40418.2.6.1.1.1.1.1 | ColumnerdDtsId | not-accessible | current | Temperature sensor id |
| 1.3.6.1.4.1.40418.2.6.1.1.1.1.2 | ColumnerdDtsName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.1.1.1.3 | ColumnerdDtsTemp | read-only | current | Temperature value |
| 1.3.6.1.4.1.40418.2.6.1.1.1.1.10 | ColumnerdDtsTempCritNotif | read-write | current | Enable notifications on the critical temperature |
| 1.3.6.1.4.1.40418.2.6.1.1.1.1.15 | ColumnerdDtsTempCritMin | read-write | current | Minimal critical temperature. Up to -55 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.1.1.1.16 | ColumnerdDtsTempCritMax | read-write | current | Maximum critical temperature. Up to +125 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.1.2 | TableerdShuntTable | not-accessible | current | A list of SNR-SHUNT values |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1 | RowerdShuntEntry | not-accessible | current | An entry (conceptual row) in the shuntTable |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.1 | ColumnerdShuntId | not-accessible | current | SNR-SHUNT id |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.2 | ColumnerdShuntName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.3 | ColumnerdShuntTemp | read-only | current | Temperature value |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.4 | ColumnerdShuntVolt | read-write | current | Voltage |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.5 | ColumnerdShuntCurrent | read-write | current | Current |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.6 | ColumnerdShuntChrgLvl | read-write | current | Battery charge level (0..100%) |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.7 | ColumnerdShuntChrgCap | read-only | current | Charge capacity |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.8 | ColumnerdShuntDischCap | read-only | current | Discharge capacity |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.9 | ColumnerdShuntEndOfChrg | read-only | current | End of charge time |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.10 | ColumnerdShuntDiscn | read-only | current | Disconnect time |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.11 | ColumnerdShuntBatLive | read-only | current | Battery using period |
| 1.3.6.1.4.1.40418.2.6.1.1.2.1.12 | ColumnerdShuntDischTime | read-only | current | Time to full discharge |
| 1.3.6.1.4.1.40418.2.6.1.1.3 | TableerdHtSensorTable | not-accessible | current | A list of SNR-HT-Sensor values |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1 | RowerdHtSensorEntry | not-accessible | current | An entry (conceptual row) in the erdHtSensorTable |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.1 | ColumnerdHtSensorId | not-accessible | current | SNR-HT-Sensor sensor id |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.2 | ColumnerdHtSensorName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.3 | ColumnerdHtSensorTemp | read-only | current | Temperature value |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.4 | ColumnerdHtSensorHumidity | read-only | current | Humidity value |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.10 | ColumnerdHtSensorTempCritNotif | read-write | current | Enable notifications on the critical temperature |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.15 | ColumnerdHtSensorTempCritMin | read-write | current | Minimal critical temperature. Up to -55 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.16 | ColumnerdHtSensorTempCritMax | read-write | current | Maximum critical temperature. Up to +125 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.20 | ColumnerdHtSensorHumiCritNotif | read-write | current | Enable notifications on the critical humidity |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.25 | ColumnerdHtSensorHumiCritMin | read-write | current | Minimal critical humidity. Up to 0 percents |
| 1.3.6.1.4.1.40418.2.6.1.1.3.1.26 | ColumnerdHtSensorHumiCritMax | read-write | current | Maximum critical humidity. Up to 100 percents |
| 1.3.6.1.4.1.40418.2.6.1.1.4 | TableerdDHTTable | not-accessible | current | A list of DHT values |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1 | RowerdDHTEntry | not-accessible | current | An entry (conceptual row) in the dtsTable |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.1 | ColumnerdIDDHT | not-accessible | current | DHT id |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.2 | ColumnerdDHTName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.3 | ColumnerdDHTTemperature | read-only | current | DHT temperature value |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.4 | ColumnerdDHTHumidity | read-only | current | DHT humidity value |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.10 | ColumnerdDHTTemperatureNotifications | read-write | current | Enable notifications on the critical temperature |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.15 | ColumnerdDHTTemperatureCritMin | read-write | current | Minimal critical temperature. Up to -55 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.16 | ColumnerdDHTTemperatureCritMax | read-write | current | Maximum critical temperature. Up to +125 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.20 | ColumnerdDHTHumidityNotifications | read-write | current | Enable notifications on the critical humidity |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.25 | ColumnerdDHTHumidityCritMin | read-write | current | Minimal critical humidity. Up to 0 percents |
| 1.3.6.1.4.1.40418.2.6.1.1.4.1.26 | ColumnerdDHTHumidityCritMax | read-write | current | Maximum critical humidity. Up to 100 percents |
| 1.3.6.1.4.1.40418.2.6.1.2 | ScalarerdAdcSensor | read-only | current | ADCIN1 sensor value |
| 1.3.6.1.4.1.40418.2.6.1.3 | ScalarerdAdc2Sensor | read-only | current | ADCIN2 sensor value |
| 1.3.6.1.4.1.40418.2.6.1.8 | ScalarerdTemperatureDHT | read-only | deprecated | DHT temperature value. **NOTE: this object is deprecated and replaced by erdDHTTemperature |
| 1.3.6.1.4.1.40418.2.6.1.9 | ScalarerdHumidityDHT | read-only | deprecated | DHT humidity value. **NOTE: this object is deprecated and replaced by erdDHTHumidity |
| 1.3.6.1.4.1.40418.2.6.1.30 | NodeerdSp | |||
| 1.3.6.1.4.1.40418.2.6.1.30.1 | TableerdRsshtpTable | not-accessible | current | A list of SNR-RSsensor-H/T/P values |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1 | RowerdRsshtpEntry | not-accessible | current | An entry (conceptual row) in the rsshtpTable |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.1 | ColumnerdRsshtpIdent | not-accessible | current | SNR-RSsensor-H/T/P id |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.2 | ColumnerdRsshtpName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.3 | ColumnerdRsshtpTemp | read-only | current | Temperature value 1 |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.4 | ColumnerdRsshtpHum | read-only | current | Humidity value |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.6 | ColumnerdRsshtpPssr | read-only | current | Pressure value |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.10 | ColumnerdRsshtpTempCritNotif | read-write | current | Enable notifications on the critical temperature |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.15 | ColumnerdRsshtpTempCritMin | read-write | current | Minimal critical temperature. Up to -55 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.16 | ColumnerdRsshtpTempCritMax | read-write | current | Maximum critical temperature. Up to +125 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.20 | ColumnerdRsshtpHumiCritNotif | read-write | current | Enable notifications on the critical humidity |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.25 | ColumnerdRsshtpHumiCritMin | read-write | current | Minimal critical humidity. Up to 0 percents |
| 1.3.6.1.4.1.40418.2.6.1.30.1.1.26 | ColumnerdRsshtpHumiCritMax | read-write | current | Maximum critical humidity. Up to 100 percents |
| 1.3.6.1.4.1.40418.2.6.1.30.5 | TableerdRscounterTable | not-accessible | current | A list of SNR-RS-Counter |
| 1.3.6.1.4.1.40418.2.6.1.30.5.1 | RowerdRscounterEntry | not-accessible | current | An entry (conceptual row) in the rscounterTable |
| 1.3.6.1.4.1.40418.2.6.1.30.5.1.1 | ColumnerdRscounterIdent | not-accessible | current | SNR-RS-Counter id |
| 1.3.6.1.4.1.40418.2.6.1.30.5.1.2 | ColumnerdRscounterName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.30.8 | TableerdSmartOutletTable | not-accessible | current | A list of SNR-Smart-Outlet |
| 1.3.6.1.4.1.40418.2.6.1.30.8.1 | RowerdSmartOutletEntry | not-accessible | current | An entry (conceptual row) in the smartOutletTable |
| 1.3.6.1.4.1.40418.2.6.1.30.8.1.1 | ColumnerdSmartOutletIdent | not-accessible | current | SNR-Smart-Outlet id |
| 1.3.6.1.4.1.40418.2.6.1.30.8.1.2 | ColumnerdSmartOutletName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.30.100 | TableerdRsshtp1WTable | not-accessible | current | A list of temperature sensors are connected to SNR-RSsensor-H/T/P |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1 | RowerdRsshtp1WEntry | not-accessible | current | An entry (conceptual row) in the rsshtp1WTable |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1.1 | ColumnerdRsshtp1WIdent | not-accessible | current | Temperature sensor id |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1.2 | ColumnerdRsshtp1WName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1.3 | ColumnerdRsshtp1WTemp | read-only | current | Temperature value |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1.4 | ColumnerdRsshtp1WMaster | read-only | current | Name of the SNR-RSsensor-H/T/P which this temperature sensor is connected to |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1.10 | ColumnerdRsshtp1WTempCritNotif | read-write | current | Enable notifications on the critical temperature |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1.15 | ColumnerdRsshtp1WTempCritMin | read-write | current | Minimal critical temperature. Up to -55 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.30.100.1.16 | ColumnerdRsshtp1WTempCritMax | read-write | current | Maximum critical temperature. Up to +125 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.30.101 | TableerdRsshtp1WHTTable | not-accessible | current | A list of HT-Sensors are connected to SNR-RSsensor-H/T/P |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1 | RowerdRsshtp1WHTEntry | not-accessible | current | An entry (conceptual row) in the rsshtp1WHTTable |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.1 | ColumnerdRsshtp1WHTIdent | not-accessible | current | Temperature sensor id |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.2 | ColumnerdRsshtp1WHTName | read-write | current | Name (max 20) |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.3 | ColumnerdRsshtp1WHTTemp | read-only | current | Temperature value |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.4 | ColumnerdRsshtp1WHTHum | read-only | current | Humidity value |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.9 | ColumnerdRsshtp1WHTMaster | read-only | current | Name of the SNR-RSsensor-H/T/P which this temperature sensor is connected to |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.10 | ColumnerdRsshtp1WHTTempCritNotif | read-write | current | Enable notifications on the critical temperature |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.15 | ColumnerdRsshtp1WHTTempCritMin | read-write | current | Minimal critical temperature. Up to -55 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.30.101.1.16 | ColumnerdRsshtp1WHTTempCritMax | read-write | current | Maximum critical temperature. Up to +125 degrees Celsius |
| 1.3.6.1.4.1.40418.2.6.1.30.200 | TableerdRsem115Table | not-accessible | current | A list of em115 values |
| 1.3.6.1.4.1.40418.2.6.1.30.200.1 | RowerdRsem115Entry | not-accessible | current | An entry (conceptual row) in the rsshtpTable |
| 1.3.6.1.4.1.40418.2.6.1.30.200.1.1 | ColumnerdRsem115Ident | not-accessible | current | em115 modbus id |
| 1.3.6.1.4.1.40418.2.6.1.30.200.1.2 | ColumnerdRsem115ApparentPower | read-only | current | ApparentPower VA |
| 1.3.6.1.4.1.40418.2.6.1.50 | NodeerdSensorsTemplate | |||
| 1.3.6.1.4.1.40418.2.6.1.50.1 | TableerdSensorsTemplateTable | not-accessible | current | A list of sensors values |
| 1.3.6.1.4.1.40418.2.6.1.50.1.1 | RowerdSensorsTemplateEntry | not-accessible | current | An entry (conceptual row) in the rsshtp1WTable |
| 1.3.6.1.4.1.40418.2.6.1.50.1.1.1 | ColumnerdSensorsTemplateValue | read-only | current | Current value |
| 1.3.6.1.4.1.40418.2.6.1.50.1.1.2 | ColumnerdSensorsTemplateName | read-write | current | Name |
| 1.3.6.1.4.1.40418.2.6.1.50.1.1.3 | ColumnerdSensorsTemplateId | not-accessible | current | ID |
| 1.3.6.1.4.1.40418.2.6.1.50.2 | ScalarerdSensorsTemplateTotalConnect | read-only | current | Total value of connected sensors |
| 1.3.6.1.4.1.40418.2.6.2 | NodeerdDio | |||
| 1.3.6.1.4.1.40418.2.6.2.1 | TableerdDiTable | not-accessible | current | A list of digital inputs values |
| 1.3.6.1.4.1.40418.2.6.2.1.1 | RowerdDiEntry | not-accessible | current | An entry (conceptual row) in the diTable |
| 1.3.6.1.4.1.40418.2.6.2.1.1.1 | ColumnerdDiName | not-accessible | current | Digital input name |
| 1.3.6.1.4.1.40418.2.6.2.1.1.2 | ColumnerdDiAlarmName | read-write | current | Alarm name |
| 1.3.6.1.4.1.40418.2.6.2.1.1.3 | ColumnerdDiState | read-only | current | Digital input state |
| 1.3.6.1.4.1.40418.2.6.2.1.1.4 | ColumnerdDiCnt | read-write | current | Digital input impulse counter. Writable for reset only. Set 0 to reset |
| 1.3.6.1.4.1.40418.2.6.2.1.1.5 | ColumnerdDiInverted | read-write | current | Input state inversion |
| 1.3.6.1.4.1.40418.2.6.2.2 | TableerdDoTable | not-accessible | current | A list of digital outputs values |
| 1.3.6.1.4.1.40418.2.6.2.2.1 | RowerdDoEntry | not-accessible | current | An entry (conceptual row) in the doTable |
| 1.3.6.1.4.1.40418.2.6.2.2.1.1 | ColumnerdDoName | not-accessible | current | Digital output name |
| 1.3.6.1.4.1.40418.2.6.2.2.1.2 | ColumnerdDoDeviceName | read-write | current | Digital output custom name |
| 1.3.6.1.4.1.40418.2.6.2.2.1.3 | ColumnerdDoState | read-write | current | Digital output state |
| 1.3.6.1.4.1.40418.2.6.2.2.1.4 | ColumnerdDoResetTime | read-write | current | Reload period (sec) |
| 1.3.6.1.4.1.40418.2.6.2.3 | ScalarerdUSenseState | read-only | current | Voltage sensor state |
| 1.3.6.1.4.1.40418.2.6.4 | NodeerdSerial | |||
| 1.3.6.1.4.1.40418.2.6.4.1 | NodeerdRs485 | |||
| 1.3.6.1.4.1.40418.2.6.4.1.1 | ScalarerdConnectStatusRs485 | read-only | current | RS485 TCP connection status |
| 1.3.6.1.4.1.40418.2.6.4.1.2 | Scalarerd4ipAddrRs485 | read-only | current | RS485 TCP connection IP address |
| 1.3.6.1.4.1.40418.2.6.4.2 | NodeerdRs232 | |||
| 1.3.6.1.4.1.40418.2.6.4.2.1 | ScalarerdConnectStatusRs232 | read-only | current | RS232 TCP connection status |
| 1.3.6.1.4.1.40418.2.6.4.2.2 | Scalarerd4ipAddrRs232 | read-only | current | RS232 TCP connection IP address |
| 1.3.6.1.4.1.40418.2.6.5 | NodeerdModules | |||
| 1.3.6.1.4.1.40418.2.6.5.1 | NodeerdGsm | |||
| 1.3.6.1.4.1.40418.2.6.5.1.1 | ScalarerdGsmModuleStatus | read-only | current | GSM module status |
| 1.3.6.1.4.1.40418.2.6.5.1.2 | ScalarerdGsmStrength | read-only | current | Signal level (dBm) |
| 1.3.6.1.4.1.40418.2.6.5.1.10 | ScalarerdGsmConnectCount | read-only | current | Number of connection attempts |
| 1.3.6.1.4.1.40418.2.6.10 | NodeerdOptions | |||
| 1.3.6.1.4.1.40418.2.6.10.1 | ScalarerdDataType | read-write | current | Data type for analog values. Integer - integer format; Float - single-precision floating-point format; Ufloat - integer x 100. If your system doesn't support f… |
| 1.3.6.1.4.1.40418.2.6.10.10 | NodeerdCrit | |||
| 1.3.6.1.4.1.40418.2.6.10.10.20 | ScalarerdHumCrit | read-write | deprecated | Critical humidity. From 0 to 100% |
| 1.3.6.1.4.1.40418.2.6.10.10.30 | ScalarerdAdcCritMin | read-write | current | ADCIN1 critical min |
| 1.3.6.1.4.1.40418.2.6.10.10.31 | ScalarerdAdcCritMax | read-write | current | ADCIN1 critical max |
| 1.3.6.1.4.1.40418.2.6.10.10.35 | ScalarerdAdcHysteresis | read-write | current | ADCIN1 hysteresis |
| 1.3.6.1.4.1.40418.2.6.10.10.40 | ScalarerdAdc2CritMin | read-write | current | ADCIN2 critical min |
| 1.3.6.1.4.1.40418.2.6.10.10.41 | ScalarerdAdc2CritMax | read-write | current | ADCIN2 critical max |
| 1.3.6.1.4.1.40418.2.6.10.10.45 | ScalarerdAdc2Hysteresis | read-write | current | ADCIN2 hysteresis |
| 1.3.6.1.4.1.40418.2.6.10.300 | ScalarerdReboot | read-write | current | Send 1 to reboot |
| 1.3.6.1.4.1.40418.2.6.11 | NodeerdDiffParams | |||
| 1.3.6.1.4.1.40418.2.6.11.1 | NodeerdUps | |||
| 1.3.6.1.4.1.40418.2.6.11.1.1 | ScalarerdUpsStatus | read-only | current | UPS status |
| 1.3.6.1.4.1.40418.2.6.11.1.2 | ScalarerdUpsMode | read-only | current | UPS mode: on line or on battery |
| 1.3.6.1.4.1.40418.2.6.11.1.8 | ScalarerdUpsBeeperStatus | read-only | current | Beeper status. Megatec only |
| 1.3.6.1.4.1.40418.2.6.11.1.10 | ScalarerdUpsShutdownStatus | read-only | current | Shutdown is active. Megatec only |
| 1.3.6.1.4.1.40418.2.6.11.1.20 | ScalarerdUpsLastBatteryChange | read-write | current | Last battery change date (mm/dd/yyyy). Smart only |
| 1.3.6.1.4.1.40418.2.6.11.1.50 | ScalarerdUpsTestTime | read-only | current | Test period |
| 1.3.6.1.4.1.40418.2.6.11.1.51 | ScalarerdUpsShutdownTime | read-write | current | Shutdown period, minutes for Megatec, seconds for Smart. Writeble for Megatec only |
| 1.3.6.1.4.1.40418.2.6.11.1.52 | ScalarerdUpsTurnOnTime | read-write | current | Turn on period, minutes. Megatec only |
| 1.3.6.1.4.1.40418.2.6.11.1.53 | ScalarerdUpsStartShutdownTurnOn | read-write | current | Shutdown after shutdownTimeUPS and turn on after turnOnTimeUPS for Megatec. Shutdown after shutdownTimeUPS for Smart. Send 1 to start, 0 to stop |
| 1.3.6.1.4.1.40418.2.6.11.1.54 | ScalarerdUpsStartTurnOn | read-write | current | Turn on immediately, send 1 to turn on. Smart only |
| 1.3.6.1.4.1.40418.2.6.11.1.70 | ScalarerdUpsTestType | read-only | current | Current test type |
| 1.3.6.1.4.1.40418.2.6.11.1.71 | ScalarerdUpsStartLongTest | read-write | current | Start specified time period test. Send period in minutes to start. Megatec only |
| 1.3.6.1.4.1.40418.2.6.11.1.75 | ScalarerdUpsSpecifiedTimeTest | read-only | current | Test for specified time period |
| 1.3.6.1.4.1.40418.2.6.11.1.80 | ScalarerdUpsLastTestDuration | read-only | current | Last test duration, seconds |
| 1.3.6.1.4.1.40418.2.6.11.1.81 | ScalarerdUpsLastBatteryDischarge | read-only | current | Last battery discharge duration, seconds |
| 1.3.6.1.4.1.40418.2.6.11.1.90 | ScalarerdUpsSingleBatteryVoltage | read-only | current | Single battery voltage, volts |
| 1.3.6.1.4.1.40418.2.6.11.1.95 | ScalarerdUpsBatteryLevel | read-only | current | Battery level, percents |
| 1.3.6.1.4.1.40418.2.6.11.1.100 | ScalarerdUpsRatingVoltage | read-only | current | Rating voltage |
| 1.3.6.1.4.1.40418.2.6.11.1.101 | ScalarerdUpsRatingCurrent | read-only | current | Rating current |
| 1.3.6.1.4.1.40418.2.6.11.1.102 | ScalarerdUpsRatingPower | read-only | current | Rating power |
| 1.3.6.1.4.1.40418.2.6.11.1.103 | ScalarerdUpsRatingBatteryVoltage | read-only | current | Rating battery voltage |
| 1.3.6.1.4.1.40418.2.6.11.1.104 | ScalarerdUpsRatingFrequency | read-only | current | Rating frequency |
| 1.3.6.1.4.1.40418.2.6.11.10 | NodeerdPid | |||
| 1.3.6.1.4.1.40418.2.6.11.10.1 | ScalarerdPidInput | read-write | current | PID SNMP input value |
| 1.3.6.1.4.1.40418.2.6.11.10.2 | ScalarerdPidOutputPercent | read-only | current | PID output value. 0 to 100% |
| 1.3.6.1.4.1.40418.2.6.11.10.3 | ScalarerdPidOutputReal | read-only | current | PID output value (voltage if PID runs in analog mode or time if PID runs in PWM mode) |
| 1.3.6.1.4.1.40418.2.6.11.10.4 | ScalarerdPidYp | read-only | current | Proportional gain |
| 1.3.6.1.4.1.40418.2.6.11.10.5 | ScalarerdPidYi | read-only | current | Integral gain |
| 1.3.6.1.4.1.40418.2.6.11.10.6 | ScalarerdPidYd | read-only | current | Derivative gain |
| 1.3.6.1.4.1.40418.2.6.11.10.7 | ScalarerdPidError | read-only | current | Error. Difference between setpoint and input value |
| 1.3.6.1.4.1.40418.2.6.11.11 | NodeerdOmix | |||
| 1.3.6.1.4.1.40418.2.6.11.11.1 | ScalarerdOmixId | read-write | current | analyzer ID |
| 1.3.6.1.4.1.40418.2.6.11.11.2 | ScalarerdOmixPhAvolt | read-only | current | Phase voltage. Phase A [Ua] |
| 1.3.6.1.4.1.40418.2.6.11.11.3 | ScalarerdOmixPhACritMin | read-write | current | Phase A voltage. Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.4 | ScalarerdOmixPhACritMax | read-write | current | Phase A voltage. Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.5 | ScalarerdOmixPhAGist | read-write | current | Phase A voltage. Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.6 | ScalarerdOmixPhBvolt | read-only | current | Phase voltage. Phase B [Ub] |
| 1.3.6.1.4.1.40418.2.6.11.11.7 | ScalarerdOmixPhBCritMin | read-write | current | Phase Bvoltage . Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.8 | ScalarerdOmixPhBCritMax | read-write | current | Phase B voltage. Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.9 | ScalarerdOmixPhBGist | read-write | current | Phase B voltage. Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.10 | ScalarerdOmixPhCvolt | read-only | current | Phase voltage. Phase C [Uc] |
| 1.3.6.1.4.1.40418.2.6.11.11.11 | ScalarerdOmixPhCCritMin | read-write | current | Phase C voltage. Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.12 | ScalarerdOmixPhCCritMax | read-write | current | Phase C voltage. Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.13 | ScalarerdOmixPhCGist | read-write | current | Phase C voltage. Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.14 | ScalarerdOmixLnAvol | read-only | current | Line voltage. L1 - L2 [Uab] |
| 1.3.6.1.4.1.40418.2.6.11.11.15 | ScalarerdOmixLnACritMin | read-write | current | Line voltage (L1 - L2). Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.16 | ScalarerdOmixLnACritMax | read-write | current | Line voltage (L1 - L2). Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.17 | ScalarerdOmixLnAGist | read-write | current | Line voltage (L1 - L2). Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.18 | ScalarerdOmixLnBvol | read-only | current | Line voltage. L2 - L3 [Ubc] |
| 1.3.6.1.4.1.40418.2.6.11.11.19 | ScalarerdOmixLnBCritMin | read-write | current | Line voltage (L2 - L3). Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.20 | ScalarerdOmixLnBCritMax | read-write | current | Line voltage (L2 - L3). Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.21 | ScalarerdOmixLnBGist | read-write | current | Line voltage (L2 - L3). Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.22 | ScalarerdOmixLnCvol | read-only | current | Line voltage. L3 - L1 [Uca] |
| 1.3.6.1.4.1.40418.2.6.11.11.23 | ScalarerdOmixLnCCritMin | read-write | current | Line voltage (L3 - L1). Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.24 | ScalarerdOmixLnCCritMax | read-write | current | Line voltage (L3 - L1). Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.25 | ScalarerdOmixLnCGist | read-write | current | Line voltage (L3 - L1). Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.26 | ScalarerdOmixPhAamp | read-only | current | Amperage. Phase A [Ia] |
| 1.3.6.1.4.1.40418.2.6.11.11.27 | ScalarerdOmixPhAmpACritMin | read-write | current | Phase A amperage. Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.28 | ScalarerdOmixPhAmpACritMax | read-write | current | Phase A amperage. Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.29 | ScalarerdOmixPhAmpAGist | read-write | current | Phase A amperage. Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.30 | ScalarerdOmixPhBamp | read-only | current | Amperage. Phase B [Ib] |
| 1.3.6.1.4.1.40418.2.6.11.11.31 | ScalarerdOmixPhAmpBCritMin | read-write | current | Phase B amperage. Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.32 | ScalarerdOmixPhAmpBCritMax | read-write | current | Phase B amperage. Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.33 | ScalarerdOmixPhAmpBGist | read-write | current | Phase B amperage. Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.34 | ScalarerdOmixPhCamp | read-only | current | Amperage. Phase C [Ic] |
| 1.3.6.1.4.1.40418.2.6.11.11.35 | ScalarerdOmixPhAmpCCritMin | read-write | current | Phase C amperage. Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.36 | ScalarerdOmixPhAmpCCritMax | read-write | current | Phase C amperage. Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.37 | ScalarerdOmixPhAmpCGist | read-write | current | Phase C amperage. Hysteresis |
| 1.3.6.1.4.1.40418.2.6.11.11.38 | ScalarerdOmixCurrFreq | read-only | current | Current frequency |
| 1.3.6.1.4.1.40418.2.6.11.11.39 | ScalarerdOmixCurrFreqCritMin | read-write | current | Current frequency. Crit min value |
| 1.3.6.1.4.1.40418.2.6.11.11.40 | ScalarerdOmixCurrFreqCritMax | read-write | current | Current frequency. Crit max value |
| 1.3.6.1.4.1.40418.2.6.11.11.41 | ScalarerdOmixCurrFreqGist | read-write | current | Current frequency. Hysteresis |
| 1.3.6.1.4.1.40418.2.6.100 | NodeerdConformance | |||
| 1.3.6.1.4.1.40418.2.6.100.1 | NodeerdGroups | |||
| 1.3.6.1.4.1.40418.2.6.100.1.1 | GrouperdNotificationsGroup | current | Notifications | |
| 1.3.6.1.4.1.40418.2.6.100.1.2 | GrouperdMeasurementsGroup | current | A collection of objects providing SNR-ERD measurements | |
| 1.3.6.1.4.1.40418.2.6.100.1.3 | GrouperdDioGroup | current | A collection of objects providing SNR-ERD DIO | |
| 1.3.6.1.4.1.40418.2.6.100.1.4 | GrouperdSerialGroup | current | A collection of objects providing SNR-ERD serial ports | |
| 1.3.6.1.4.1.40418.2.6.100.1.5 | GrouperdModulesGroup | current | A collection of objects providing SNR-ERD modules | |
| 1.3.6.1.4.1.40418.2.6.100.1.6 | GrouperdOptionsGroup | current | A collection of objects providing SNR-ERD options | |
| 1.3.6.1.4.1.40418.2.6.100.1.7 | GrouperdDiffParamsGroup | current | A collection of objects providing SNR-ERD different parameters | |
| 1.3.6.1.4.1.40418.2.6.100.1.8 | GrouperdDeprecatedGroup | deprecated | deprecated | |
| 1.3.6.1.4.1.40418.2.6.100.1.9 | GrouperdNotifDeprecatedGroup | deprecated | Notifications | |
| 1.3.6.1.4.1.40418.2.6.100.2 | NodeerdCompliances | |||
| 1.3.6.1.4.1.40418.2.6.100.2.1 | ComplianceerdCompliance | current | The compliance statement for SNR-ERD that support all current functions. | |
| 1.3.6.1.4.1.40418.2.6.100.2.2 | ComplianceerdComplianceDeprecated | deprecated | The compliance statement for SNR-ERD that support all deprecated functions. | |
| 1.3.6.1.4.1.40418.2.8 | NodesnrErd5 | |||
| 1.3.6.1.4.1.40418.2.8.0 | Nodeerd5traps | |||
| 1.3.6.1.4.1.40418.2.8.0.1 | Notificationerd5di1Alarm | deprecated | Input 1 Alarm fires. **NOTE: this object is deprecated and replaced by erdDtsTable | |
| 1.3.6.1.4.1.40418.2.8.0.2 | Notificationerd5di1Release | deprecated | Input 1 Alarm released. **NOTE: this object is deprecated and replaced by erdDtsTable | |
| 1.3.6.1.4.1.40418.2.8.0.3 | Notificationerd5di2Alarm | deprecated | Input 2 Alarm fires. **NOTE: this object is deprecated and replaced by erdDtsTable | |
| 1.3.6.1.4.1.40418.2.8.0.4 | Notificationerd5di2Release | deprecated | Input 2 Alarm released. **NOTE: this object is deprecated and replaced by erdDtsTable | |
| 1.3.6.1.4.1.40418.2.8.0.5 | Notificationerd5di3Alarm | deprecated | Input 3 Alarm fires. **NOTE: this object is deprecated and replaced by erdDi3Alarm | |
| 1.3.6.1.4.1.40418.2.8.0.6 | Notificationerd5di3Release | deprecated | Input 3 Alarm released. **NOTE: this object is deprecated and replaced by erdDi3Release | |
| 1.3.6.1.4.1.40418.2.8.0.7 | Notificationerd5di4Alarm | deprecated | Input 4 Alarm fires. **NOTE: this object is deprecated and replaced by erdDi4Alarm | |
| 1.3.6.1.4.1.40418.2.8.0.8 | Notificationerd5di4Release | deprecated | Input 4 Alarm released. **NOTE: this object is deprecated and replaced by erdDi4Release | |
| 1.3.6.1.4.1.40418.2.8.0.9 | Notificationerd5di5Alarm | deprecated | Input 5 Alarm fires. **NOTE: this object is deprecated and replaced by erdDi5Alarm | |
| 1.3.6.1.4.1.40418.2.8.0.10 | Notificationerd5di5Release | deprecated | Input 5 Alarm released. **NOTE: this object is deprecated and replaced by erdDi5Release | |
| 1.3.6.1.4.1.40418.2.8.0.11 | Notificationerd5uSenseAlarm | deprecated | Signifies that Phase sensor Alarm fires. **NOTE: this object is deprecated and replaced by erdUSenseAlarm | |
| 1.3.6.1.4.1.40418.2.8.0.12 | Notificationerd5uSenseRelease | deprecated | Signifies that Phase sensor Alarm released. **NOTE: this object is deprecated and replaced by erdUSenseRelease | |
| 1.3.6.1.4.1.40418.2.8.0.13 | Notificationerd5reloutOn | deprecated | Signifies that Rele was swithed on by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdReloutOn | |
| 1.3.6.1.4.1.40418.2.8.0.14 | Notificationerd5reloutOff | deprecated | Signifies that Rele was swithed off by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdReloutOff | |
| 1.3.6.1.4.1.40418.2.8.0.15 | Notificationerd5do1On | deprecated | Signifies that Output 1 was swithed on by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo1On | |
| 1.3.6.1.4.1.40418.2.8.0.16 | Notificationerd5do1Off | deprecated | Signifies that Output 1 was swithed off by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo1Off | |
| 1.3.6.1.4.1.40418.2.8.0.17 | Notificationerd5do2On | deprecated | Signifies that Output 2 was swithed on by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo2On | |
| 1.3.6.1.4.1.40418.2.8.0.18 | Notificationerd5do2Off | deprecated | Signifies that Output 2 was swithed off by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo2Off | |
| 1.3.6.1.4.1.40418.2.8.0.19 | Notificationerd5do3On | deprecated | Signifies that Output 3 was swithed on by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo3On | |
| 1.3.6.1.4.1.40418.2.8.0.20 | Notificationerd5do3Off | deprecated | Signifies that Output 3 was swithed off by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo3Off | |
| 1.3.6.1.4.1.40418.2.8.0.21 | Notificationerd5do4On | deprecated | Signifies that Output 4 was swithed on by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo4On | |
| 1.3.6.1.4.1.40418.2.8.0.22 | Notificationerd5do4Off | deprecated | Signifies that Output 4 was swithed off by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo4Off | |
| 1.3.6.1.4.1.40418.2.8.0.23 | Notificationerd5do5On | deprecated | Signifies that Output 5 was swithed on by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo5On | |
| 1.3.6.1.4.1.40418.2.8.0.24 | Notificationerd5do5Off | deprecated | Signifies that Output 5 was swithed off by Thermostat or Gigrostat mode. **NOTE: this object is deprecated and replaced by erdDo5Off | |
| 1.3.6.1.4.1.40418.2.8.0.29 | Notificationerd5tempSensorAlarm | deprecated | Temperature alarm. **NOTE: this object is deprecated and replaced by erdTempSensorAlarm | |
| 1.3.6.1.4.1.40418.2.8.0.30 | Notificationerd5tempSensorRelease | deprecated | Temperature release. **NOTE: this object is deprecated and replaced by erdTempSensorRelease | |
| 1.3.6.1.4.1.40418.2.8.0.31 | Notificationerd5adcSensorAlarm | deprecated | Voltage sensor alarm. **NOTE: this object is deprecated and replaced by erdAdcSensorAlarm | |
| 1.3.6.1.4.1.40418.2.8.0.32 | Notificationerd5adcSensorRelease | deprecated | Voltage sensor release. **NOTE: this object is deprecated and replaced by erdAdcSensorRelease | |
| 1.3.6.1.4.1.40418.2.8.0.45 | Notificationerd5pingLost | deprecated | Ping lost. **NOTE: this object is deprecated and replaced by erdPingLost | |
| 1.3.6.1.4.1.40418.2.8.0.198 | Notificationerd5upsStartBatteryTest | deprecated | UPS start battery test. **NOTE: this object is deprecated and replaced by erdUpsStartBatteryTest | |
| 1.3.6.1.4.1.40418.2.8.0.199 | Notificationerd5upsStopBatteryTest | deprecated | UPS stop battery test. **NOTE: this object is deprecated and replaced by erdUpsStopBatteryTest | |
| 1.3.6.1.4.1.40418.2.8.0.200 | Notificationerd5upsUtilityFail | deprecated | UPS utility fail. **NOTE: this object is deprecated and replaced by erdUpsUtilityFail | |
| 1.3.6.1.4.1.40418.2.8.0.201 | Notificationerd5upsUtilityOk | deprecated | UPS utility OK. **NOTE: this object is deprecated and replaced by erdUpsUtilityOk | |
| 1.3.6.1.4.1.40418.2.8.0.202 | Notificationerd5upsOn | deprecated | UPS On. **NOTE: this object is deprecated and replaced by erdUpsOn | |
| 1.3.6.1.4.1.40418.2.8.0.203 | Notificationerd5upsOff | deprecated | UPS Off. **NOTE: this object is deprecated and replaced by erdUpsOff | |
| 1.3.6.1.4.1.40418.2.8.0.204 | Notificationerd5upsLoadCritical | deprecated | UPS critical load. **NOTE: this object is deprecated and replaced by erdUpsLoadCritical | |
| 1.3.6.1.4.1.40418.2.8.0.205 | Notificationerd5upsLoadNormal | deprecated | UPS normal load. **NOTE: this object is deprecated and replaced by erdUpsLoadNormal | |
| 1.3.6.1.4.1.40418.2.8.0.206 | Notificationerd5upsBatteryVoltageFull | deprecated | UPS battery voltage is full. **NOTE: this object is deprecated and replaced by erdUpsBatteryVoltageFull | |
| 1.3.6.1.4.1.40418.2.8.0.207 | Notificationerd5upsBatteryVoltageNormal | deprecated | UPS battery voltage is normal. **NOTE: this object is deprecated and replaced by erdUpsBatteryVoltageNormal | |
| 1.3.6.1.4.1.40418.2.8.0.208 | Notificationerd5upsBatteryVoltageCritical | deprecated | UPS battery voltage is critical. **NOTE: this object is deprecated and replaced by erdUpsBatteryVoltageCritical | |
| 1.3.6.1.4.1.40418.2.8.0.209 | Notificationerd5upsBatteryDischarged | current | UPS battery is discharged. **NOTE: this object is deprecated and replaced by erdUpsBatteryDischarged | |
| 1.3.6.1.4.1.40418.2.8.1 | Nodeerd5measurements | |||
| 1.3.6.1.4.1.40418.2.8.1.1 | Nodeerd5oneWire | |||
| 1.3.6.1.4.1.40418.2.8.1.1.1 | Tableerd5dtsTable | not-accessible | deprecated | A list of temperature sensors values. **NOTE: this object is deprecated and replaced by erdDtsTable |
| 1.3.6.1.4.1.40418.2.8.1.1.1.1 | Rowerd5dtsEntry | not-accessible | deprecated | An entry (conceptual row) in the dtsTable. **NOTE: this object is deprecated and replaced by erdDtsEntry |
| 1.3.6.1.4.1.40418.2.8.1.1.1.1.1 | Columnerd5dtsId | not-accessible | deprecated | Temperature sensor id. **NOTE: this object is deprecated and replaced by erdDtsId |
| 1.3.6.1.4.1.40418.2.8.1.1.1.1.2 | Columnerd5dtsName | read-write | deprecated | Name (max 20). **NOTE: this object is deprecated and replaced by erdDtsName |
| 1.3.6.1.4.1.40418.2.8.1.1.1.1.3 | Columnerd5dtsTemp | read-only | deprecated | Temperature value. **NOTE: this object is deprecated and replaced by erdDtsTemp |
| 1.3.6.1.4.1.40418.2.8.1.1.1.1.10 | Columnerd5dtsTempCritNotif | read-write | deprecated | Enable notifications on the critical temperature. **NOTE: this object is deprecated and replaced by erdDtsTempCritNotif |
| 1.3.6.1.4.1.40418.2.8.1.1.1.1.15 | Columnerd5dtsTempCritMin | read-write | deprecated | Minimal critical temperature. Up to -55 degrees Celsius. **NOTE: this object is deprecated and replaced by erdDtsTempCritMin |
| 1.3.6.1.4.1.40418.2.8.1.1.1.1.16 | Columnerd5dtsTempCritMax | read-write | deprecated | Maximum critical temperature. Up to +125 degrees Celsius. **NOTE: this object is deprecated and replaced by erdDtsTempCritMax |
| 1.3.6.1.4.1.40418.2.8.1.2 | Scalarerd5adc1Sensor | read-only | deprecated | ADC1 sensor value. **NOTE: this object is deprecated and replaced by erdAdcSensor |
| 1.3.6.1.4.1.40418.2.8.1.3 | Scalarerd5adc2Sensor | read-only | deprecated | ADC2 sensor value. **NOTE: this object is deprecated and replaced by erdAdc2Sensor |
| 1.3.6.1.4.1.40418.2.8.2 | Nodeerd5dio | |||
| 1.3.6.1.4.1.40418.2.8.2.1 | Tableerd5diTable | not-accessible | deprecated | A list of digital inputs values. **NOTE: this object is deprecated and replaced by erdDiTable |
| 1.3.6.1.4.1.40418.2.8.2.1.1 | Rowerd5diEntry | not-accessible | deprecated | An entry (conceptual row) in the diTable. **NOTE: this object is deprecated and replaced by erdDiEntry |
| 1.3.6.1.4.1.40418.2.8.2.1.1.1 | Columnerd5diName | not-accessible | deprecated | Digital input name. **NOTE: this object is deprecated and replaced by erdDiName |
| 1.3.6.1.4.1.40418.2.8.2.1.1.2 | Columnerd5diAlarmName | read-write | deprecated | Alarm name. **NOTE: this object is deprecated and replaced by erdDiAlarmName |
| 1.3.6.1.4.1.40418.2.8.2.1.1.3 | Columnerd5diState | read-only | deprecated | Digital input state. **NOTE: this object is deprecated and replaced by erdDiState |
| 1.3.6.1.4.1.40418.2.8.2.1.1.4 | Columnerd5diCnt | read-write | deprecated | Digital input impulse counter. Writable for reset only. Set 0 to reset. **NOTE: this object is deprecated and replaced by erdDiCnt |
| 1.3.6.1.4.1.40418.2.8.2.1.1.5 | Columnerd5diInverted | read-write | deprecated | Input state inversion. **NOTE: this object is deprecated and replaced by erdDiInverted |
| 1.3.6.1.4.1.40418.2.8.2.2 | Tableerd5doTable | not-accessible | deprecated | A list of digital outputs values. **NOTE: this object is deprecated and replaced by erdDoTable |
| 1.3.6.1.4.1.40418.2.8.2.2.1 | Rowerd5doEntry | not-accessible | deprecated | An entry (conceptual row) in the doTable. **NOTE: this object is deprecated and replaced by erdDoEntry |
| 1.3.6.1.4.1.40418.2.8.2.2.1.1 | Columnerd5doName | not-accessible | deprecated | Digital output name. **NOTE: this object is deprecated and replaced by erdDoName |
| 1.3.6.1.4.1.40418.2.8.2.2.1.2 | Columnerd5doDeviceName | read-write | deprecated | Digital output custom name. **NOTE: this object is deprecated and replaced by erdDoDeviceName |
| 1.3.6.1.4.1.40418.2.8.2.2.1.3 | Columnerd5doState | read-write | deprecated | Digital output state. **NOTE: this object is deprecated and replaced by erdDoState |
| 1.3.6.1.4.1.40418.2.8.2.2.1.4 | Columnerd5doResetTime | read-write | deprecated | Reload period (sec). **NOTE: this object is deprecated and replaced by erdDoResetTime |
| 1.3.6.1.4.1.40418.2.8.2.3 | Scalarerd5uSenseState | read-only | deprecated | Voltage sensor state. **NOTE: this object is deprecated and replaced by erdUSenseState |
| 1.3.6.1.4.1.40418.2.8.4 | Nodeerd5serial | |||
| 1.3.6.1.4.1.40418.2.8.4.1 | Nodeerd5rs485 | |||
| 1.3.6.1.4.1.40418.2.8.4.1.1 | Scalarerd5connectStatusRs485 | read-only | deprecated | RS485 TCP connection status. **NOTE: this object is deprecated and replaced by erdConnectStatusRs485 |
| 1.3.6.1.4.1.40418.2.8.4.1.2 | Scalarerd5ipAddrRs485 | read-only | deprecated | RS485 TCP connection IP address. **NOTE: this object is deprecated and replaced by erdIpAddrRs485 |
| 1.3.6.1.4.1.40418.2.8.4.2 | Nodeerd5rs232 | |||
| 1.3.6.1.4.1.40418.2.8.4.2.1 | Scalarerd5connectStatusRs232 | read-only | deprecated | RS232 TCP connection status. **NOTE: this object is deprecated and replaced by erdConnectStatusRs232 |
| 1.3.6.1.4.1.40418.2.8.4.2.2 | Scalarerd5ipAddrRs232 | read-only | deprecated | RS232 TCP connection IP address. **NOTE: this object is deprecated and replaced by erdIpAddrRs232 |
| 1.3.6.1.4.1.40418.2.8.10 | Nodeerd5options | |||
| 1.3.6.1.4.1.40418.2.8.10.1 | Scalarerd5dataType | read-write | deprecated | Values data type. **NOTE: this object is deprecated and replaced by erdDataType |
| 1.3.6.1.4.1.40418.2.8.10.10 | Nodeerd5crit | |||
| 1.3.6.1.4.1.40418.2.8.10.10.30 | Scalarerd5adc1CritMin | read-write | deprecated | ADC IN critical min. **NOTE: this object is deprecated and replaced by erdAdc1CritMin |
| 1.3.6.1.4.1.40418.2.8.10.10.31 | Scalarerd5adc1CritMax | read-write | deprecated | ADC IN critical max. **NOTE: this object is deprecated and replaced by erdAdc1CritMax |
| 1.3.6.1.4.1.40418.2.8.10.10.35 | Scalarerd5adc1Hysteresis | read-write | deprecated | ADC IN hysteresis. **NOTE: this object is deprecated and replaced by erdAdc1Hysteresis |
| 1.3.6.1.4.1.40418.2.8.10.10.40 | Scalarerd5adc2CritMin | read-write | deprecated | ADC IN critical min. **NOTE: this object is deprecated and replaced by erdAdc2CritMin |
| 1.3.6.1.4.1.40418.2.8.10.10.41 | Scalarerd5adc2CritMax | read-write | deprecated | ADC IN critical max. **NOTE: this object is deprecated and replaced by erdAdc2CritMax |
| 1.3.6.1.4.1.40418.2.8.10.10.45 | Scalarerd5adc2Hysteresis | read-write | deprecated | ADC IN hysteresis. **NOTE: this object is deprecated and replaced by erdAdc2Hysteresis |
| 1.3.6.1.4.1.40418.2.8.10.20 | Nodeerd5ip | |||
| 1.3.6.1.4.1.40418.2.8.10.20.1 | Scalarerd5ipOwn | read-write | deprecated | IP address. **NOTE: this object is deprecated and replaced by erdIpOwn |
| 1.3.6.1.4.1.40418.2.8.10.20.2 | Scalarerd5ipGateway | read-write | deprecated | Gateway IP address. **NOTE: this object is deprecated and replaced by erdIpGateway |
| 1.3.6.1.4.1.40418.2.8.10.20.3 | Scalarerd5ipMask | read-write | deprecated | IP Mask. **NOTE: this object is deprecated and replaced by erdIpMask |
| 1.3.6.1.4.1.40418.2.8.10.300 | Scalarerd5reboot | read-write | deprecated | Send 1 to reboot. **NOTE: this object is deprecated and replaced by erdReboot |
| 1.3.6.1.4.1.40418.2.8.11 | Nodeerd5diffparams | |||
| 1.3.6.1.4.1.40418.2.8.11.1 | Nodeerd5ups | |||
| 1.3.6.1.4.1.40418.2.8.11.1.1 | Scalarerd5upsStatus | read-only | deprecated | UPS status. **NOTE: this object is deprecated and replaced by erdUpsStatus |
| 1.3.6.1.4.1.40418.2.8.11.1.2 | Scalarerd5upsMode | read-only | deprecated | UPS mode: on line or on battery. **NOTE: this object is deprecated and replaced by erdUpsMode |
| 1.3.6.1.4.1.40418.2.8.11.1.8 | Scalarerd5upsBeeperStatus | read-only | deprecated | Beeper status. Megatec only. **NOTE: this object is deprecated and replaced by erdUpsBeeperStatus |
| 1.3.6.1.4.1.40418.2.8.11.1.10 | Scalarerd5upsShutdownStatus | read-only | deprecated | Shutdown is active. Megatec only. **NOTE: this object is deprecated and replaced by erdUpsShutdownStatus |
| 1.3.6.1.4.1.40418.2.8.11.1.20 | Scalarerd5upsLastBatteryChange | read-write | deprecated | Last battery change date (mm/dd/yyyy). Smart only. **NOTE: this object is deprecated and replaced by erdUpsLastBatteryChange |
| 1.3.6.1.4.1.40418.2.8.11.1.50 | Scalarerd5upsTestTime | read-only | deprecated | Test period. **NOTE: this object is deprecated and replaced by erdUpsTestTime |
| 1.3.6.1.4.1.40418.2.8.11.1.51 | Scalarerd5upsShutdownTime | read-write | deprecated | Shutdown period, minutes for Megatec, seconds for Smart. Writeble for Megatec only. **NOTE: this object is deprecated and replaced by erdUpsShutdownTime |
| 1.3.6.1.4.1.40418.2.8.11.1.52 | Scalarerd5upsTurnOnTime | read-write | deprecated | Turn on period, minutes. Megatec only. **NOTE: this object is deprecated and replaced by erdUpsTurnOnTime |
| 1.3.6.1.4.1.40418.2.8.11.1.53 | Scalarerd5upsStartShutdownTurnOn | read-write | deprecated | Shutdown after shutdownTimeUPS and turn on after turnOnTimeUPS for Megatec. Shutdown after shutdownTimeUPS for Smart. Send 1 to start, 0 to stop. **NOTE: this … |
| 1.3.6.1.4.1.40418.2.8.11.1.54 | Scalarerd5upsStartTurnOn | read-write | deprecated | Turn on immediately, send 1 to turn on. Smart only. **NOTE: this object is deprecated and replaced by erdUpsStartTurnOn |
| 1.3.6.1.4.1.40418.2.8.11.1.70 | Scalarerd5upsTestType | read-only | deprecated | Current test type. **NOTE: this object is deprecated and replaced by erdUpsTestType |
| 1.3.6.1.4.1.40418.2.8.11.1.71 | Scalarerd5upsStartLongTest | read-write | deprecated | Start specified time period test. Send period in minutes to start. Megatec only. **NOTE: this object is deprecated and replaced by erdUpsStartLongTest |
| 1.3.6.1.4.1.40418.2.8.11.1.75 | Scalarerd5upsSpecifiedTimeTest | read-only | deprecated | Test for specified time period. **NOTE: this object is deprecated and replaced by erdUpsSpecifiedTimeTest |
| 1.3.6.1.4.1.40418.2.8.11.1.80 | Scalarerd5upsLastTestDuration | read-only | deprecated | Last test duration, seconds. **NOTE: this object is deprecated and replaced by erdUpsLastTestDuration |
| 1.3.6.1.4.1.40418.2.8.11.1.81 | Scalarerd5upsLastBatteryDischarge | read-only | deprecated | Last battery discharge duration, seconds. **NOTE: this object is deprecated and replaced by erdUpsLastBatteryDischarge |
| 1.3.6.1.4.1.40418.2.8.11.1.90 | Scalarerd5upsSingleBatteryVoltage | read-only | deprecated | Single battery voltage, volts. **NOTE: this object is deprecated and replaced by erdUpsSingleBatteryVoltage |
| 1.3.6.1.4.1.40418.2.8.11.1.95 | Scalarerd5upsBatteryLevel | read-only | deprecated | Battery level, percents. **NOTE: this object is deprecated and replaced by erdUpsBatteryLevel |
| 1.3.6.1.4.1.40418.2.8.11.1.100 | Scalarerd5upsRatingVoltage | read-only | deprecated | Rating voltage. **NOTE: this object is deprecated and replaced by erdUpsRatingVoltage |
| 1.3.6.1.4.1.40418.2.8.11.1.101 | Scalarerd5upsRatingCurrent | read-only | deprecated | Rating current. **NOTE: this object is deprecated and replaced by erdUpsRatingCurrent |
| 1.3.6.1.4.1.40418.2.8.11.1.102 | Scalarerd5upsRatingPower | read-only | deprecated | Rating power. **NOTE: this object is deprecated and replaced by erdUpsRatingPower |
| 1.3.6.1.4.1.40418.2.8.11.1.103 | Scalarerd5upsRatingBatteryVoltage | read-only | deprecated | Rating battery voltage. **NOTE: this object is deprecated and replaced by erdUpsRatingBatteryVoltage |
| 1.3.6.1.4.1.40418.2.8.11.1.104 | Scalarerd5upsRatingFrequency | read-only | deprecated | Rating frequency. **NOTE: this object is deprecated and replaced by erdUpsRatingFrequency |
| 1.3.6.1.4.1.40418.2.8.100 | Nodeerd5conformance | |||
| 1.3.6.1.4.1.40418.2.8.100.1 | Nodeerd5groups | |||
| 1.3.6.1.4.1.40418.2.8.100.1.101 | Grouperd5notificationsGroup | deprecated | Notifications | |
| 1.3.6.1.4.1.40418.2.8.100.1.102 | Grouperd5measurementsGroup | deprecated | A collection of objects providing SNR-ERD-5 measurements | |
| 1.3.6.1.4.1.40418.2.8.100.1.103 | Grouperd5dioGroup | deprecated | A collection of objects providing SNR-ERD-5 DIO | |
| 1.3.6.1.4.1.40418.2.8.100.1.104 | Grouperd5serialGroup | deprecated | A collection of objects providing SNR-ERD-5 serial ports | |
| 1.3.6.1.4.1.40418.2.8.100.1.106 | Grouperd5optionsGroup | deprecated | A collection of objects providing SNR-ERD-5 options | |
| 1.3.6.1.4.1.40418.2.8.100.1.107 | Grouperd5diffParamsGroup | deprecated | A collection of objects providing SNR-ERD-5 different parameters | |
| 1.3.6.1.4.1.40418.2.8.100.2 | Nodeerd5compliances |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SensorID | Unsigned32 (1..4294967295) | current | This data type is a non-negative value. |