SOCOMECUPSSTS-MIB
67 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | AutonomousType TestAndIncr TimeInterval TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4555 | NodesocomecUPS | |||
| 1.3.6.1.4.1.4555.1 | Nodesoftware | |||
| 1.3.6.1.4.1.4555.1.1 | Nodenetwork | |||
| 1.3.6.1.4.1.4555.1.1.10 | Nodeconnectsts | |||
| 1.3.6.1.4.1.4555.1.1.10.1 | NodestsObjects | |||
| 1.3.6.1.4.1.4555.1.1.10.1.1 | NodestsIdent | |||
| 1.3.6.1.4.1.4555.1.1.10.1.1.1 | ScalarstsIdentModel | read-only | mandatory | The STS Model designation. |
| 1.3.6.1.4.1.4555.1.1.10.1.1.2 | ScalarstsIdentSerialNumber | read-only | mandatory | The STS serial number |
| 1.3.6.1.4.1.4555.1.1.10.1.1.3 | ScalarstsIdentFirmwareVersion | read-only | mandatory | The STS firmware version. |
| 1.3.6.1.4.1.4555.1.1.10.1.1.4 | ScalarstsIdentAgentSoftwareVersion | read-only | mandatory | Connect ME software version. |
| 1.3.6.1.4.1.4555.1.1.10.1.2 | NodestsSource1 | |||
| 1.3.6.1.4.1.4555.1.1.10.1.2.1 | ScalarstsSource1Status | read-only | mandatory | Source 1 status |
| 1.3.6.1.4.1.4555.1.1.10.1.2.2 | ScalarstsSource1Prefered | read-only | mandatory | Source 1 is prefered source |
| 1.3.6.1.4.1.4555.1.1.10.1.2.3 | ScalarstsSource1Frequency | read-only | mandatory | Source1 input frequency in 0.1 HZ. |
| 1.3.6.1.4.1.4555.1.1.10.1.2.4 | ScalarstsSource1NumLines | read-only | mandatory | The number of phases |
| 1.3.6.1.4.1.4555.1.1.10.1.2.5 | TablestsSource1Table | not-accessible | mandatory | A list of input table entries |
| 1.3.6.1.4.1.4555.1.1.10.1.2.5.1 | RowstsSource1Entry | not-accessible | mandatory | Array of measurements |
| 1.3.6.1.4.1.4555.1.1.10.1.2.5.1.1 | ColumnstsSource1LineIndex | read-only | mandatory | Source 1 phase number. |
| 1.3.6.1.4.1.4555.1.1.10.1.2.5.1.2 | ColumnstsSource1Voltage | read-only | mandatory | Source 1 input voltage (V) or (U) in volts. in volts. |
| 1.3.6.1.4.1.4555.1.1.10.1.3 | NodestsSource2 | |||
| 1.3.6.1.4.1.4555.1.1.10.1.3.1 | ScalarstsSource2Status | read-only | mandatory | Source 2 status |
| 1.3.6.1.4.1.4555.1.1.10.1.3.2 | ScalarstsSource2Prefered | read-only | mandatory | Source 2 is prefered source |
| 1.3.6.1.4.1.4555.1.1.10.1.3.3 | ScalarstsSource2Frequency | read-only | mandatory | Source 2 input frequency in 0.1 HZ. |
| 1.3.6.1.4.1.4555.1.1.10.1.3.4 | ScalarstsSource2NumLines | read-only | mandatory | Number of phases |
| 1.3.6.1.4.1.4555.1.1.10.1.3.5 | TablestsSource2Table | not-accessible | mandatory | A list of input table entries |
| 1.3.6.1.4.1.4555.1.1.10.1.3.5.1 | RowstsSource2Entry | not-accessible | mandatory | Array of measurements |
| 1.3.6.1.4.1.4555.1.1.10.1.3.5.1.1 | ColumnstsSource2LineIndex | read-only | mandatory | Source 2 phase number |
| 1.3.6.1.4.1.4555.1.1.10.1.3.5.1.2 | ColumnstsSource2Voltage | read-only | mandatory | Source 2 input voltage (V) or (U) in volts. |
| 1.3.6.1.4.1.4555.1.1.10.1.4 | NodestsSources | |||
| 1.3.6.1.4.1.4555.1.1.10.1.4.1 | ScalarstsSourcesInteraction | read-only | mandatory | Sources synchronisation status |
| 1.3.6.1.4.1.4555.1.1.10.1.5 | NodestsOutput | |||
| 1.3.6.1.4.1.4555.1.1.10.1.5.1 | ScalarstsOutputLoadStatus | read-only | mandatory | Output load status |
| 1.3.6.1.4.1.4555.1.1.10.1.5.2 | ScalarstsOutputStatus | read-only | mandatory | Static switches status |
| 1.3.6.1.4.1.4555.1.1.10.1.5.3 | ScalarstsOutputFrequency | read-only | mandatory | Output frequency in 0.1 HZ. |
| 1.3.6.1.4.1.4555.1.1.10.1.5.4 | ScalarstsOutputLoadRate | read-only | mandatory | Output Load Rate in %. |
| 1.3.6.1.4.1.4555.1.1.10.1.5.5 | ScalarstsOutputNumLines | read-only | mandatory | Number of phases |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6 | TablestsOutputTable | not-accessible | mandatory | A list of input table entries. The number of entries |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1 | RowstsOutputEntry | not-accessible | mandatory | Array of measurements |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1.1 | ColumnstsOutputLineIndex | read-only | mandatory | Output phase number. |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1.2 | ColumnstsOutputVoltage | read-only | mandatory | Output voltage (V) or (U) in volts. |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1.3 | ColumnstsOutputCurrent | read-only | mandatory | Output current in Amps. |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1.4 | ColumnstsOutputkVA | read-only | mandatory | Output active power in kVA. |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1.5 | ColumnstsOutputkW | read-only | mandatory | Output power in kW. |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1.6 | ColumnstsOutputCrestFactor | read-only | mandatory | Output CrestFactor *10 |
| 1.3.6.1.4.1.4555.1.1.10.1.5.6.1.7 | ColumnstsOutputPowerFactor | read-only | mandatory | Output PowerFactor *100 |
| 1.3.6.1.4.1.4555.1.1.10.1.6 | NodestsAlarm | |||
| 1.3.6.1.4.1.4555.1.1.10.1.6.1 | NodestsWellKnownAlarms | |||
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.1 | ScalarstsImminentStop | read-only | mandatory | Imminent Stop |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.2 | ScalarstsTransferImpossible | read-only | mandatory | Transfer Impossible |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.3 | ScalarstsConsecutiveDetection | read-only | mandatory | Transfer locked after several consecutive detections |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.4 | ScalarstsOverload | read-only | mandatory | STS in overload |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.5 | ScalarstsString1Alarm | read-only | mandatory | String 1 failure or degraded or short circuit |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.6 | ScalarstsString2Alarm | read-only | mandatory | String 2 failure or degraded or short circuit |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.7 | ScalarstsPreventiveMaintenance | read-only | mandatory | Preventive Maintenance |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.8 | ScalarstsGeneralAlarm | read-only | mandatory | STS general alarm |
| 1.3.6.1.4.1.4555.1.1.10.1.6.1.9 | ScalarstsCustomInputAlarm | read-only | mandatory | Custom Input Alarm |
| 1.3.6.1.4.1.4555.1.1.10.1.7 | NodestsAgent | |||
| 1.3.6.1.4.1.4555.1.1.10.1.7.1 | ScalarstsAgentTrapString | read-only | mandatory | This OID allows traps to be sent with an octet string argument |
| 1.3.6.1.4.1.4555.1.1.10.2 | NodestsTraps | |||
| 1.3.6.1.4.1.4555.1.1.10.2.1 | NodestsTrapImminentStop | STS Imminent Stop | ||
| 1.3.6.1.4.1.4555.1.1.10.2.2 | NodestsTrapOverload | STS in Overload | ||
| 1.3.6.1.4.1.4555.1.1.10.2.3 | NodestsTrapSwitchOnPreferedSource | The load is supplied by the prefered source | ||
| 1.3.6.1.4.1.4555.1.1.10.2.4 | NodestsTrapSwitchOnAlternateSource | The load is supplied by the alternate source | ||
| 1.3.6.1.4.1.4555.1.1.10.2.5 | NodestsTrapSource1PreferredSource | The source 1 is the preferred source | ||
| 1.3.6.1.4.1.4555.1.1.10.2.6 | NodestsTrapOutputLoadOFF | Load not supplied | ||
| 1.3.6.1.4.1.4555.1.1.10.2.7 | NodestsTrapGeneralAlarm | STS general alarm | ||
| 1.3.6.1.4.1.4555.1.1.10.2.8 | NodestsTrapAlarmCancelled | Alarm cancelled. STS in normal situation |