SONICWALL-FIREWALL-IP-STATISTICS-MIB
67 objects
The Generic MIB Module for SonicWALL Firewall.
Imported Objects
| RFC1155-SMI | Counter Gauge |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| SONICWALL-SMI | sonicwallFw |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8741.1.3 | IdentitysonicwallFwStatsModule | The Generic MIB Module for SonicWALL Firewall. | ||
| 1.3.6.1.4.1.8741.1.3.1 | NodesonicwallFwStats | |||
| 1.3.6.1.4.1.8741.1.3.1.1 | ScalarsonicMaxConnCacheEntries | read-only | current | Maximum number of connection cache entries allowed through the firewall |
| 1.3.6.1.4.1.8741.1.3.1.2 | ScalarsonicCurrentConnCacheEntries | read-only | current | Number of active connection cache entries through the firewall |
| 1.3.6.1.4.1.8741.1.3.1.3 | ScalarsonicCurrentCPUUtil | read-only | current | Instantaneous CPU Utilization in percent |
| 1.3.6.1.4.1.8741.1.3.1.4 | ScalarsonicCurrentRAMUtil | read-only | current | Instantaneous RAM Utilization in percent |
| 1.3.6.1.4.1.8741.1.3.1.5 | ScalarsonicNatTranslationCount | read-only | current | Current number of dynamic NAT translations being performed. |
| 1.3.6.1.4.1.8741.1.3.1.6 | ScalarsonicCurrentManagementCPUUtil | read-only | current | Instantaneous management CPU Utilization in percent. |
| 1.3.6.1.4.1.8741.1.3.1.7 | ScalarsonicCurrentFwdAndInspectCPUUtil | read-only | current | Instantaneous Forwarding/Inspection CPU Utilization in percent. |
| 1.3.6.1.4.1.8741.1.3.1.8 | TablesonicIfStatTable | not-accessible | current | List of physical interfaces and their current usage in percentage. |
| 1.3.6.1.4.1.8741.1.3.1.8.1 | RowsonicIfStatEntry | not-accessible | current | Interface status entry. |
| 1.3.6.1.4.1.8741.1.3.1.8.1.1 | ColumnsonicIfIndex | read-only | current | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.8741.1.3.1.8.1.2 | ColumnsonicIfUsage | read-only | current | Interface bandwidth usage value in percentage. |
| 1.3.6.1.4.1.8741.1.3.1.8.1.3 | ColumnsonicIfThroughput | read-only | current | Interface throughput value in bits per second. |
| 1.3.6.1.4.1.8741.1.3.2 | NodesonicwallFwVPNStats | |||
| 1.3.6.1.4.1.8741.1.3.2.1 | NodesonicwallFwVpnIPSecStats | |||
| 1.3.6.1.4.1.8741.1.3.2.1.1 | TablesonicSAStatTable | not-accessible | current | This table provides statistics for each Security Association. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1 | RowsonicSAStatEntry | not-accessible | current | Entries in table cannot be added or deleted. This table is completely controlled by the agent. Each SA statistics will be represented by an entry in this table. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.1 | ColumnsonicIpsecSaIndex | read-only | current | Phase2 SA index. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.2 | ColumnsonicSAStatPeerGateway | read-only | current | Peer gateway address where the tunnel gets terminated . |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.3 | ColumnsonicSAStatSrcAddrBegin | read-only | current | First address of the Source network for the phase2 SA . |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.4 | ColumnsonicSAStatSrcAddrEnd | read-only | current | Last address of the Source network for the phase2 SA . |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.5 | ColumnsonicSAStatDstAddrBegin | read-only | current | First address of the destination network for the phase2 SA . |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.6 | ColumnsonicSAStatDstAddrEnd | read-only | current | Last address of the destination network for the phase2 SA . |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.7 | ColumnsonicSAStatCreateTime | read-only | current | Time this phase2 SA was actually created in GMT. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.8 | ColumnsonicSAStatEncryptPktCount | read-only | current | Total encrypted packet count for this phase2 SA. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.9 | ColumnsonicSAStatEncryptByteCount | read-only | current | Total encrypted byte count for this phase2 SA. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.10 | ColumnsonicSAStatDecryptPktCount | read-only | current | Total decrypted packet count for this phase2 SA. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.11 | ColumnsonicSAStatDecryptByteCount | read-only | current | Total decrypted byte count for this phase2 SA. |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.12 | ColumnsonicSAStatInFragPktCount | read-only | current | Incoming Fragmented packet count for this phase2 SA |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.13 | ColumnsonicSAStatOutFragPktCount | read-only | current | Outgoing Fragmented packet count for this phase2 SA |
| 1.3.6.1.4.1.8741.1.3.2.1.1.1.14 | ColumnsonicSAStatUserName | read-only | current | Name of the security policy used for creating this phase2 SA. |
| 1.3.6.1.4.1.8741.1.3.3 | NodesonicwallFwHWStats | |||
| 1.3.6.1.4.1.8741.1.3.3.3 | NodesonicwallFwHWSensorStats | |||
| 1.3.6.1.4.1.8741.1.3.3.3.1 | TablesonicwallSensorsTable | not-accessible | current | This lists all the sensors and their value in SonicWALL firewall device. |
| 1.3.6.1.4.1.8741.1.3.3.3.1.1 | RowsonicwallSensorsEntry | not-accessible | current | SonicWALL sensor entry |
| 1.3.6.1.4.1.8741.1.3.3.3.1.1.1 | ColumnsonicwallSensorsIndex | read-only | current | Index that identifies the sensor |
| 1.3.6.1.4.1.8741.1.3.3.3.1.1.2 | ColumnsonicwallSensorsId | read-only | current | Index that identifies the sensor ID |
| 1.3.6.1.4.1.8741.1.3.3.3.1.1.3 | ColumnsonicwallSensorsDevice | read-only | current | Sensor descriptive name |
| 1.3.6.1.4.1.8741.1.3.3.3.1.1.4 | ColumnsonicwallSensorsValue | read-only | current | Sensor value |
| 1.3.6.1.4.1.8741.1.3.3.3.1.1.5 | ColumnsonicwallSensorsUnit | read-only | current | Sensor unit |
| 1.3.6.1.4.1.8741.1.3.4 | NodesonicwallFwSyslogStats | |||
| 1.3.6.1.4.1.8741.1.3.4.1 | NodesonicwallFwSyslogSetting | |||
| 1.3.6.1.4.1.8741.1.3.4.1.1 | ScalarsonicSyslogFacility | read-only | current | Syslog facility configured on firewall. |
| 1.3.6.1.4.1.8741.1.3.4.1.2 | ScalarsonicSyslogOverrideSetting | read-only | current | When using SonicWALL ViewPoint for reporting solution, this object indicates whether the appliance overrides Syslog settings with reporting software settings. |
| 1.3.6.1.4.1.8741.1.3.4.1.3 | ScalarsonicSyslogFormat | read-only | current | Syslog format configured on firewall. The following Syslog formats can be specified: Default - Use the default SonicWALL Syslog format. WebTrends - Use the Web… |
| 1.3.6.1.4.1.8741.1.3.4.1.4 | ScalarsonicSyslogID | read-only | current | The Syslog ID field is included in all generated syslog messages, prefixed by id=. The Syslog ID field is disabled when the Override Syslog Settings with Repor… |
| 1.3.6.1.4.1.8741.1.3.4.1.5 | ScalarsonicSyslogEventRateLimitEnable | read-only | current | This object indicates whether the appliance enables rate limiting of events to prevent the internal or external logging mechanism from being overwhelmed by log… |
| 1.3.6.1.4.1.8741.1.3.4.1.6 | ScalarsonicSyslogEventRateLimit | read-only | current | Event rate limiting: Maximum Events Per Second. |
| 1.3.6.1.4.1.8741.1.3.4.1.7 | ScalarsonicSyslogDataRateLimitEnable | read-only | current | This object indicates whether the appliance enables rate limiting of data to prevent the internal or external logging mechanism from being overwhelmed by log e… |
| 1.3.6.1.4.1.8741.1.3.4.1.8 | ScalarsonicSyslogDataRateLimit | read-only | current | Data rate limiting: Maximum Bytes Per Second. |
| 1.3.6.1.4.1.8741.1.3.4.1.9 | ScalarsonicSyslogNDPPEnable | read-only | current | This object indicates whether the appliance enables NDPP Enforcement for Syslog Server. |
| 1.3.6.1.4.1.8741.1.3.4.2 | NodesonicwallFwSyslogServer | |||
| 1.3.6.1.4.1.8741.1.3.4.2.1 | ScalarsonicSyslogMaxServers | read-only | current | The maximum number of syslog servers that can be configured for the system in sonicSyslogTable. |
| 1.3.6.1.4.1.8741.1.3.4.2.2 | TablesonicSyslogServerTable | not-accessible | current | This table contains entries of syslog servers for the appliance. The maximum number of entries is indicated by the object sonicwallSyslogMaxServers. |
| 1.3.6.1.4.1.8741.1.3.4.2.2.1 | RowsonicSyslogServerEntry | not-accessible | current | An entry containing info about syslog server configured by SonicWALL firewall appliance |
| 1.3.6.1.4.1.8741.1.3.4.2.2.1.1 | ColumnsonicSyslogServerIndex | read-only | current | Index that identifies the syslog server |
| 1.3.6.1.4.1.8741.1.3.4.2.2.1.2 | ColumnsonicSyslogServerAddr | read-only | current | Syslog server address. |
| 1.3.6.1.4.1.8741.1.3.4.2.2.1.3 | ColumnsonicSyslogServerPort | read-only | current | Syslog server port. |
| 1.3.6.1.4.1.8741.1.3.4.3 | NodesonicwallFwSyslogStatistic | |||
| 1.3.6.1.4.1.8741.1.3.4.3.1 | ScalarsonicSyslogMessage | read-only | current | Running total of syslog message generated since startup. |
| 1.3.6.1.4.1.8741.1.3.4.3.2 | ScalarsonicSyslogStreamData | read-only | current | Running total of syslog stream data generated since startup. |
| 1.3.6.1.4.1.8741.1.3.5 | NodesonicwallFwDpiSslStats | |||
| 1.3.6.1.4.1.8741.1.3.5.1 | ScalarsonicDpiSslConnCountCur | read-only | current | Current SSL-inspected connections through the firewall. |
| 1.3.6.1.4.1.8741.1.3.5.2 | ScalarsonicDpiSslConnCountHighWater | read-only | current | Highwater SSL-inspected connections through the firewall. |
| 1.3.6.1.4.1.8741.1.3.5.3 | ScalarsonicDpiSslConnCountMax | read-only | current | Maximum SSL-inspected connections through the firewall. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SyslogFacility | INTEGER { kern (0), user (1), mail (2), daemon (3), auth (4), syslog (5), lpr (6), news (7), uucp (8), cron (9), authpriv (10), ftp (11), ntp (12), audit (13), alert (14), cron2 (15), local0 (16), local1 (17), local2 (18), local3 (19), local4 (20), local5 (21), local6 (22), local7 (23) } | current | The Syslog standard facilities defined by RFC 3164. |