SOURCE-ROUTING-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | dot1dBridge dot1dSr |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.3.1 | Tabledot1dSrPortTable | not-accessible | mandatory | A table that contains information about every port that is associated with this source route bridge. |
| 1.3.6.1.2.1.17.3.1.1 | Rowdot1dSrPortEntry | not-accessible | mandatory | A list of information for each port of a source route bridge. |
| 1.3.6.1.2.1.17.3.1.1.1 | Columndot1dSrPort | read-only | mandatory | The port number of the port for which this entry contains Source Route management information. |
| 1.3.6.1.2.1.17.3.1.1.2 | Columndot1dSrPortHopCount | read-write | mandatory | The maximum number of routing descriptors allowed in an All Paths or Spanning Tree Explorer frames. |
| 1.3.6.1.2.1.17.3.1.1.3 | Columndot1dSrPortLocalSegment | read-write | mandatory | The segment number that uniquely identifies the segment to which this port is connected. Current source routing protocols limit this value to the range: 0 thro… |
| 1.3.6.1.2.1.17.3.1.1.4 | Columndot1dSrPortBridgeNum | read-write | mandatory | A bridge number uniquely identifies a bridge when more than one bridge is used to span the same two segments. Current source routing protocols limit this value… |
| 1.3.6.1.2.1.17.3.1.1.5 | Columndot1dSrPortTargetSegment | read-write | mandatory | The segment number that corresponds to the target segment this port is considered to be connected to by the bridge. Current source routing protocols limit this… |
| 1.3.6.1.2.1.17.3.1.1.6 | Columndot1dSrPortLargestFrame | read-write | mandatory | The maximum size of the INFO field (LLC and above) that this port can send/receive. It does not include any MAC level (framing) octets. The value of this objec… |
| 1.3.6.1.2.1.17.3.1.1.7 | Columndot1dSrPortSTESpanMode | read-write | mandatory | Determines how this port behaves when presented with a Spanning Tree Explorer frame. The value 'disabled(2)' indicates that the port will not accept or send Sp… |
| 1.3.6.1.2.1.17.3.1.1.8 | Columndot1dSrPortSpecInFrames | read-only | mandatory | The number of Specifically Routed frames, also referred to as Source Routed Frames, that have been received from this port's segment. |
| 1.3.6.1.2.1.17.3.1.1.9 | Columndot1dSrPortSpecOutFrames | read-only | mandatory | The number of Specifically Routed frames, also referred to as Source Routed Frames, that this port has transmitted on its segment. |
| 1.3.6.1.2.1.17.3.1.1.10 | Columndot1dSrPortApeInFrames | read-only | mandatory | The number of All Paths Explorer frames, also referred to as All Routes Explorer frames, that have been received by this port from its segment. |
| 1.3.6.1.2.1.17.3.1.1.11 | Columndot1dSrPortApeOutFrames | read-only | mandatory | The number of all Paths Explorer Frames, also referred to as All Routes Explorer frames, that have been transmitted by this port on its segment. |
| 1.3.6.1.2.1.17.3.1.1.12 | Columndot1dSrPortSteInFrames | read-only | mandatory | The number of spanning tree explorer frames that have been received by this port from its segment. |
| 1.3.6.1.2.1.17.3.1.1.13 | Columndot1dSrPortSteOutFrames | read-only | mandatory | The number of spanning tree explorer frames that have been transmitted by this port on its segment. |
| 1.3.6.1.2.1.17.3.1.1.14 | Columndot1dSrPortSegmentMismatchDiscards | read-only | mandatory | The number of explorer frames that have been discarded by this port because the routing descriptor field contained an invalid adjacent segment value. |
| 1.3.6.1.2.1.17.3.1.1.15 | Columndot1dSrPortDuplicateSegmentDiscards | read-only | mandatory | The number of frames that have been discarded by this port because the routing descriptor field contained a duplicate segment identifier. |
| 1.3.6.1.2.1.17.3.1.1.16 | Columndot1dSrPortHopCountExceededDiscards | read-only | mandatory | The number of explorer frames that have been discarded by this port because the Routing Information Field has exceeded the maximum route descriptor length. |
| 1.3.6.1.2.1.17.3.1.1.17 | Columndot1dSrPortDupLanIdOrTreeErrors | read-only | mandatory | The number of duplicate LAN IDs or Tree errors. This helps in detection of problems in networks containing older IBM Source Routing Bridges. |
| 1.3.6.1.2.1.17.3.1.1.18 | Columndot1dSrPortLanIdMismatches | read-only | mandatory | The number of ARE and STE frames that were discarded because the last LAN ID in the routing information field did not equal the LAN-in ID. This error can occur… |
| 1.3.6.1.2.1.17.3.2 | Scalardot1dSrBridgeLfMode | read-write | mandatory | Indicates whether the bridge operates using older 3 bit length negotiation fields or the newer 6 bit length field in its RIF. |
| 1.3.6.1.2.1.17.10 | Nodedot1dPortPair | |||
| 1.3.6.1.2.1.17.10.1 | Scalardot1dPortPairTableSize | read-only | mandatory | The total number of entries in the Bridge Port Pair Database. |
| 1.3.6.1.2.1.17.10.2 | Tabledot1dPortPairTable | not-accessible | mandatory | A table that contains information about every port pair database entity associated with this source routing bridge. |
| 1.3.6.1.2.1.17.10.2.1 | Rowdot1dPortPairEntry | not-accessible | mandatory | A list of information for each port pair entity of a bridge. |
| 1.3.6.1.2.1.17.10.2.1.1 | Columndot1dPortPairLowPort | read-write | mandatory | The port number of the lower numbered port for which this entry contains port pair database information. |
| 1.3.6.1.2.1.17.10.2.1.2 | Columndot1dPortPairHighPort | read-write | mandatory | The port number of the higher numbered port for which this entry contains port pair database information. |
| 1.3.6.1.2.1.17.10.2.1.3 | Columndot1dPortPairBridgeNum | read-write | mandatory | A bridge number that uniquely identifies the path provided by this source routing bridge between the segments connected to dot1dPortPairLowPort and dot1dPortPa… |
| 1.3.6.1.2.1.17.10.2.1.4 | Columndot1dPortPairBridgeState | read-write | mandatory | The state of dot1dPortPairBridgeNum. Writing 'invalid(3)' to this object removes the corresponding entry. |