MIB Viewer

SPG9000-MIB

44 objects
MIB module for the Telestream SPG9000 sync generator
Imported Objects
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIenterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.47445Nodetelestream
1.3.6.1.4.1.47445.1Nodetekvideo
1.3.6.1.4.1.47445.1.1Nodetekvideoproducts
1.3.6.1.4.1.47445.1.1.2Identityspg9000MIB module for the Telestream SPG9000 sync generator
1.3.6.1.4.1.47445.1.1.2.1Nodetraps
1.3.6.1.4.1.47445.1.1.2.1.0NodetrapType
1.3.6.1.4.1.47445.1.1.2.1.0.1NotificationhardwareFaultcurrentAny system hardware fault, including voltages out of range, temperatures too high, fans stopped, PLLs unlocked, etc.
1.3.6.1.4.1.47445.1.1.2.1.0.2NotificationhardwareFaultClearcurrentHardware fault condition no longer present.
1.3.6.1.4.1.47445.1.1.2.1.0.3NotificationpowerSupplyFaultcurrentFault for a power supply module, such as low voltage.
1.3.6.1.4.1.47445.1.1.2.1.0.4NotificationpowerSupplyWarningcurrentWarning for a power supply module, such as when the PS reaches the temperature-weight hours (TWH) limit.
1.3.6.1.4.1.47445.1.1.2.1.0.5NotificationpowerSupplyFaultClearcurrentPower supply fault or warning condition no longer present.
1.3.6.1.4.1.47445.1.1.2.1.0.6NotificationlockErrorcurrentReference source for the instrument is unlocked, such as when the source signal is missing. For GNSS or PTP, the instrument will be in holdover mode.
1.3.6.1.4.1.47445.1.1.2.1.0.7NotificationlockWarningcurrentNear loss of lock when using genlock reference, GNSS figure of merit (FOM) is below the user-specified threshold when using GNSS reference, or the time is near…
1.3.6.1.4.1.47445.1.1.2.1.0.8NotificationlockErrorClearcurrentLock error or warning condition no longer present.
1.3.6.1.4.1.47445.1.1.2.1.0.9NotificationtimeErrorcurrentTime-of-day source is missing, such as loss of GNSS signal, no PTP leader, or LTC or VITC input signal is missing.
1.3.6.1.4.1.47445.1.1.2.1.0.10NotificationtimeWarningcurrentThe timing of the LTC input signal and the genlock input signal are the same frame rate, but the relative timing is outside the SMPTE ST 12 specification.
1.3.6.1.4.1.47445.1.1.2.1.0.11NotificationtimeErrorClearcurrentTime-of-day error or warning condition no longer present.
1.3.6.1.4.1.47445.1.1.2.1.0.12NotificationgnssSignalWarningcurrentThe GNSS signal level has dropped below the user-selected warning threshold.
1.3.6.1.4.1.47445.1.1.2.1.0.13NotificationcrossReferenceErrorcurrentThe cross-reference time comparison difference has exceeded the user-selected error threshold.
1.3.6.1.4.1.47445.1.1.2.1.0.14NotificationcrossReferenceWarningcurrentThe cross-reference time comparison difference has exceeded the user-selected warning threshold.
1.3.6.1.4.1.47445.1.1.2.1.0.15NotificationreferenceSourceChangecurrentThe reference source has switched from the primary source to the secondary source or from the secondary source to the primary source.
1.3.6.1.4.1.47445.1.1.2.1.0.16NotificationptpGMActiveToInactivecurrentA PTP grandmaster has transitioned from the active state to one of the inactive states (passive, faulty, or unused).
1.3.6.1.4.1.47445.1.1.2.1.1ScalartrapInfoaccessible-for-notifycurrentAdditional information about the specific alarm event.
1.3.6.1.4.1.47445.1.1.2.1.2ScalartimeOfDayaccessible-for-notifycurrentCurrent time of day for the instrument. The sysUpTime value included in the standard Trap message is insufficient to identify the time of the alarm.
1.3.6.1.4.1.47445.1.1.2.2Nodestatus
1.3.6.1.4.1.47445.1.1.2.2.1ScalarreferenceStatusread-onlycurrentCurrent status of the reference source, corresponding to the EXT and INT indicators.
1.3.6.1.4.1.47445.1.1.2.2.2ScalartimeStatusread-onlycurrentCurrent status of the primary time-of-day source, corresponding to the TIME INPUT indicator.
1.3.6.1.4.1.47445.1.1.2.2.3NodeptpGMStatus
1.3.6.1.4.1.47445.1.1.2.2.3.1Scalarptp1GMStatusread-onlycurrentCurrent status of the PTP 1 grandmaster
1.3.6.1.4.1.47445.1.1.2.2.3.2Scalarptp2GMStatusread-onlycurrentCurrent status of the PTP 2 grandmaster
1.3.6.1.4.1.47445.1.1.2.2.3.3Scalarptp3GMStatusread-onlycurrentCurrent status of the PTP 3 grandmaster
1.3.6.1.4.1.47445.1.1.2.2.3.4Scalarptp4GMStatusread-onlycurrentCurrent status of the PTP 4 grandmaster
1.3.6.1.4.1.47445.1.1.2.2.4ScalarhardwareStatusread-onlycurrentCurrent status of the system hardware
1.3.6.1.4.1.47445.1.1.2.2.5NodepowerSupplyStatus
1.3.6.1.4.1.47445.1.1.2.2.5.1Scalarps1Statusread-onlycurrentCurrent status of power supply 1 module
1.3.6.1.4.1.47445.1.1.2.2.5.2Scalarps2Statusread-onlycurrentCurrent status of power supply 2 module
1.3.6.1.4.1.47445.1.1.2.2.6ScalarreferenceSourceread-onlycurrentIdentifies the current reference source as either primary or secondary.
1.3.6.1.4.1.47445.1.1.2.2.7ScalarcrossReferenceStatusread-onlycurrentCurrent status of the cross-reference time comparison, corresponding to the X-REF indicator.
1.3.6.1.4.1.47445.1.2Nodetekvideomibs
1.3.6.1.4.1.47445.1.2.1Groupspg9000ObjectscurrentSet of objects providing support for this MIB.
1.3.6.1.4.1.47445.1.2.2Groupspg9000NotificationscurrentSet of notifications providing support for this MIB.
1.3.6.1.4.1.47445.1.2.3Compliancespg9000CompliancecurrentCompliance statement for the the entities in this MIB.
Type Definitions
NameSyntaxStatusDescription
PowerSupplyStatusTypeINTEGER { active(1), backup(2), uninstalled(3), warning(4), faulty(5) }currentPower supply status, corresponding to the PWR 1 and PWR 2 front panel indicators.
PTPGMStatusTypeINTEGER { active(1), passive(2), faulty(3), unused(4) }currentPTP grandmaster status, corresponding to the GM 1 and GM 2 front panel indicators.