STS_SEQUENZ-MIB
238 objects
The MIB module to describe all object of STS Unit
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16460 | Nodeconvertronic | |||
| 1.3.6.1.4.1.16460.4 | Identitysts_system | The MIB module to describe all object of STS Unit | ||
| 1.3.6.1.4.1.16460.4.1 | NodemeasureValues | |||
| 1.3.6.1.4.1.16460.4.1.1 | Nodests_measureValues | |||
| 1.3.6.1.4.1.16460.4.1.1.1 | ScalarsVal_UN | read-only | mandatory | Mains voltage (V), Value: 230(230V) |
| 1.3.6.1.4.1.16460.4.1.1.2 | ScalarsVal_FreqNetz | read-only | mandatory | Mains frequency (Hz), Value: 50(50Hz) |
| 1.3.6.1.4.1.16460.4.1.1.3 | ScalarsVal_UWR | read-only | mandatory | Inverter voltage (V), Value: 230(230V) |
| 1.3.6.1.4.1.16460.4.1.1.4 | ScalarsVal_FreqWR | read-only | mandatory | Inverter frequency (Hz), Value: 50(50Hz) |
| 1.3.6.1.4.1.16460.4.1.1.5 | ScalarsVal_UDC | read-only | mandatory | Battery voltage (V), Value: 120(12V) |
| 1.3.6.1.4.1.16460.4.1.1.6 | ScalarsVal_U10 | read-only | mandatory | STS Output Voltage (V), Value: 230(230V) |
| 1.3.6.1.4.1.16460.4.1.1.7 | ScalarsVal_IO1 | read-only | mandatory | STS Output current (A), Value: 15(15A) |
| 1.3.6.1.4.1.16460.4.1.1.8 | ScalarsVal_P | read-only | mandatory | STS active power (W), Value: 2105(2105W) |
| 1.3.6.1.4.1.16460.4.1.1.9 | ScalarsVal_S | read-only | mandatory | STS apparent power (VA), Value: 495(495VA) |
| 1.3.6.1.4.1.16460.4.1.1.10 | ScalarsVal_FAN1 | read-only | mandatory | Fan 1 speed (rpm), Value: 4200(4200rpm) |
| 1.3.6.1.4.1.16460.4.1.1.11 | ScalarsVal_FAN2 | read-only | mandatory | Fan 2 speed (rpm), Value: 3800(3800rpm) |
| 1.3.6.1.4.1.16460.4.1.1.12 | ScalarsVal_TK | read-only | mandatory | STS temperature (�C), Value: 301(30,1�C) |
| 1.3.6.1.4.1.16460.4.1.1.13 | ScalarsVal_IO2 | read-only | mandatory | STS output current 2 (A), Value: 18(18A) |
| 1.3.6.1.4.1.16460.4.1.1.14 | ScalarsVal_IDC | read-only | mandatory | battery output current (A), Value: 24(24A) |
| 1.3.6.1.4.1.16460.4.1.2 | Nodeinverter_measureValues | |||
| 1.3.6.1.4.1.16460.4.1.2.1 | Tableinverter_Table | not-accessible | mandatory | Table of CAN-nodes. |
| 1.3.6.1.4.1.16460.4.1.2.1.1 | Rowinverter_Entry | not-accessible | optional | CAN-node entries. |
| 1.3.6.1.4.1.16460.4.1.2.1.1.0 | Columninv_Index | not-accessible | current | NA |
| 1.3.6.1.4.1.16460.4.1.2.1.1.1 | Columninv_Nbr | read-only | mandatory | Inverter Number, Value: 1 ... 15 |
| 1.3.6.1.4.1.16460.4.1.2.1.1.2 | Columninv_InCurrent | read-only | mandatory | In-Current of the Inverter, Value: todo |
| 1.3.6.1.4.1.16460.4.1.2.1.1.3 | Columninv_OutCurrent | read-only | mandatory | Out-Current of the Inverter, Value: todo |
| 1.3.6.1.4.1.16460.4.1.2.1.1.4 | Columninv_Temperature | read-only | mandatory | Temperature of the Inverter, Value: todo |
| 1.3.6.1.4.1.16460.4.1.2.1.1.5 | Columninv_InputVoltage | read-only | mandatory | Input Voltage of the Inverter, Value: todo |
| 1.3.6.1.4.1.16460.4.1.2.1.1.6 | Columninv_STi_great | read-only | mandatory | Internal temperature high, Value: 0= < limit 1= > limit |
| 1.3.6.1.4.1.16460.4.1.2.1.1.7 | Columninv_Fan | read-only | mandatory | Fan error, Value: 0= no Error 1= error active |
| 1.3.6.1.4.1.16460.4.1.2.1.1.8 | Columninv_RemoteOffCan | read-only | mandatory | Far off via can-controll, Value: 0= not off 1= far off is active |
| 1.3.6.1.4.1.16460.4.1.2.1.1.9 | Columninv_UoutOff | read-only | mandatory | State of Output voltage, Value: 0= voltage is on 1= voltage shut down |
| 1.3.6.1.4.1.16460.4.1.2.1.1.10 | Columninv_Bit_ShortCircuit | read-only | mandatory | Short circuit is present, Value: 0= normal operation 1= Short circuit |
| 1.3.6.1.4.1.16460.4.1.2.1.1.11 | Columninv_Bit_OutputVoltage | read-only | mandatory | State of the output voltage, Value: 0= voltage off, error state 1= voltage ok,normal operation |
| 1.3.6.1.4.1.16460.4.1.2.1.1.12 | Columninv_Bit_InputVoltLow | read-only | mandatory | Input voltage reached lover limit, Value: 0= normal operation 1= error present |
| 1.3.6.1.4.1.16460.4.1.2.1.1.13 | Columninv_Bit_InputVoltHigh | read-only | mandatory | Input voltage reached upper limit, Value: 0= normal operation 1= error present |
| 1.3.6.1.4.1.16460.4.1.2.1.1.14 | Columninv_Bit_OutputVoltLow | read-only | mandatory | Output voltage reached lower limit, Value: 0= normal operation 1= error present |
| 1.3.6.1.4.1.16460.4.1.2.1.1.15 | Columninv_Bit_OutputVoltHigh | read-only | mandatory | Output voltage reached upper limit, Value: 0= normal operation 1= error present |
| 1.3.6.1.4.1.16460.4.1.2.1.1.16 | Columninv_Bit_OutputCurrHigh | read-only | mandatory | Output current reached upper limit, Value: 0= normal operation 1= error present |
| 1.3.6.1.4.1.16460.4.1.2.1.1.17 | Columninv_Bit_RemoteOff | read-only | mandatory | Inverter has shut-down, Value: 0= normal operation 1= shut-down |
| 1.3.6.1.4.1.16460.4.1.2.1.1.18 | Columninv_Bit_CentralAlarm | read-only | mandatory | Central alarm has triggert, Value: 0= normal operation 1= error present |
| 1.3.6.1.4.1.16460.4.1.2.1.1.19 | Columninv_Type | read-only | mandatory | Type description |
| 1.3.6.1.4.1.16460.4.1.2.1.1.20 | Columninv_Mat_CD | read-only | mandatory | Order number |
| 1.3.6.1.4.1.16460.4.1.2.1.1.21 | Columninv_SerialNo | read-only | mandatory | Serial number |
| 1.3.6.1.4.1.16460.4.1.2.1.1.22 | Columninv_HardwareVersion | read-only | mandatory | Hardware version |
| 1.3.6.1.4.1.16460.4.1.2.1.1.23 | Columninv_SoftwareVersion | read-only | mandatory | Software Version |
| 1.3.6.1.4.1.16460.4.2 | Nodesettings | |||
| 1.3.6.1.4.1.16460.4.2.1 | NodenetworkSettings | |||
| 1.3.6.1.4.1.16460.4.2.1.1 | NodebaseSettings | |||
| 1.3.6.1.4.1.16460.4.2.1.1.1 | ScalarbETHSpeed | read-write | mandatory | Communication speed setting: Value: 0= autonegotation 1= 10Mb Halfduplex 2= 10Mb Fullduplex 3= 100Mb Halfduplex 4= 100Mb Fullduplex |
| 1.3.6.1.4.1.16460.4.2.1.1.2 | ScalarbLocalIP | read-write | mandatory | IP-Adress of the Unit, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.1.3 | ScalarbSubnetMask | read-write | mandatory | Used Subnetmask of the Unit, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.1.4 | ScalarbGateway | read-write | mandatory | IP of the used Gateway, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.1.5 | ScalarbDNSServer | read-write | mandatory | IP of the used Domain Name Service Server, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.1.6 | ScalarbDHCPServer | read-write | mandatory | Name of the DHCP-Server to use, Value: max. 16 char. |
| 1.3.6.1.4.1.16460.4.2.1.1.7 | ScalarbFixedIP_OnOff | read-write | mandatory | Use Fixed connection settings, Value: 1= Use IP set with LocalIP 0= Use automatic IP-Configuration |
| 1.3.6.1.4.1.16460.4.2.1.1.8 | ScalarbDefaultIP_OnOff | read-write | mandatory | Usue Fix IP, Value: 0= off 1= Use IP 192.168.0.10 |
| 1.3.6.1.4.1.16460.4.2.1.1.9 | ScalarbDHCP_OnOff | read-write | mandatory | Value: 0= off 1= Use DHCP for automatic Network configuration |
| 1.3.6.1.4.1.16460.4.2.1.1.10 | ScalarbBOOTP_OnOff | read-write | mandatory | Value: 0= off 1= Use BOOTP for automatic Network configuration |
| 1.3.6.1.4.1.16460.4.2.1.1.11 | ScalarbLocation | read-write | mandatory | Location of the seen Unit, Value: max. 16 char. |
| 1.3.6.1.4.1.16460.4.2.1.2 | NodeserviceSettings | |||
| 1.3.6.1.4.1.16460.4.2.1.2.1 | ScalarservSNMP_OnOff | read-write | mandatory | Use Simple Network Management Protocol, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.1.2.2 | ScalarservTrapReceiver1 | read-write | mandatory | IP of SNMP-Trapreceiver 1, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.2.3 | ScalarservTrapReceiver2 | read-write | mandatory | IP of SNMP-Trapreceiver 2, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.2.4 | ScalarservTrapReceiver3 | read-write | mandatory | IP of SNMP-Trapreceiver 3, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.2.5 | ScalarservTrapReceiver4 | read-write | mandatory | IP of SNMP-Trapreceiver 4, Value: xxx.xxx.xxx.xxx |
| 1.3.6.1.4.1.16460.4.2.1.2.6 | ScalarservReadCommunity | read-write | mandatory | SNMP read community, Value: max. 13 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.7 | ScalarservWriteCommunity | read-write | mandatory | SNMP write community, Value: max. 13 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.8 | ScalarservSMTP_OnOff | read-write | mandatory | Use Simple Mail Transfer Protocol, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.1.2.9 | ScalarservMailServer | read-write | mandatory | Ip or Name of the used mailserver, Value: max. 19 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.10 | ScalarservMailUsername | read-write | mandatory | Username for the mailserver, Value: max. 10 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.11 | ScalarservMailPassword | read-write | mandatory | Password for the mailserver, Value: max. 10 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.12 | ScalarservMailReceiver1 | read-write | mandatory | First receiver e-mail address, Value: max. 48 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.13 | ScalarservMailTrapLevel1 | read-write | mandatory | Traplevel for first mailreceiver, Value: 0= Off ... 3= send maximum Traps |
| 1.3.6.1.4.1.16460.4.2.1.2.14 | ScalarservMailReceiver2 | read-write | mandatory | second receiver e-mail address, Value: max. 48 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.15 | ScalarservMailTrapLevel2 | read-write | mandatory | Traplevel for second mailreceiver, Value: 0= Off ... 3= send maximum Traps |
| 1.3.6.1.4.1.16460.4.2.1.2.16 | ScalarservSNTP_OnOff | read-write | mandatory | Simple Network Time Protocol, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.1.2.17 | ScalarservSNTPServer1 | read-write | mandatory | IP or name for first SNTP server, Value: max. 19 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.18 | ScalarservSNTPServer2 | read-write | mandatory | IP or name for second SNTP server, Value: max. 19 char. |
| 1.3.6.1.4.1.16460.4.2.1.2.19 | ScalarservTelnet_OnOff | read-write | mandatory | Configuration over Telnet, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.1.2.20 | ScalarservSyslog_OnOff | read-write | mandatory | Syslog feature, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2 | NodeunitSettings | |||
| 1.3.6.1.4.1.16460.4.2.2.1 | NodebasicSettings | |||
| 1.3.6.1.4.1.16460.4.2.2.1.1 | Scalarsts_Version | read-only | mandatory | STS Software version, Value: 99(Ver 0.99) |
| 1.3.6.1.4.1.16460.4.2.2.1.2 | Scalarsts_Inverter | read-write | mandatory | STS count of needed inverter, Value: 0 - 15 |
| 1.3.6.1.4.1.16460.4.2.2.1.3 | Scalarsts_SigCF_b0 | read-write | mandatory | Central failure signal: Source 1 failure, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.4 | Scalarsts_SigCF_b1 | read-write | mandatory | Central failure signal: Source 2 failure, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.5 | Scalarsts_SigCF_b2 | read-write | mandatory | Central failure signal: Syncronisation error, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.6 | Scalarsts_SigCF_b3 | read-write | mandatory | Central failure signal: Inverter failure, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.7 | Scalarsts_SigCF_b4 | read-write | mandatory | Central failure signal: STS overtemperature, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.8 | Scalarsts_SigCF_b5 | read-write | mandatory | Central failure signal: STS overload, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.9 | Scalarsts_SigCF_b6 | read-write | mandatory | Central failure signal: Inverter overload, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.10 | Scalarsts_SigCF_b7 | read-write | mandatory | Central failure signal: DC voltage low, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.11 | Scalarsts_SigCF_b8 | read-write | mandatory | Central failure signal: DC voltage high, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.12 | Scalarsts_SigCF_b9 | read-write | mandatory | Central failure signal: U batterie< warning, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.13 | Scalarsts_SigCF_b10 | read-write | mandatory | Central failure signal: U batterie> warning, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.14 | Scalarsts_SigCF_b11 | read-write | mandatory | Central failure signal: Fan error, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.1.15 | Scalarsts_SigCF_b12 | read-write | mandatory | Central failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.1.16 | Scalarsts_SigCF_b13 | read-write | mandatory | Central failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.1.17 | Scalarsts_SigCF_b14 | read-write | mandatory | Central failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.1.18 | Scalarsts_SigCF_b15 | read-write | mandatory | Central failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.1.19 | Scalarsts_DelayRelCA | read-write | mandatory | Delay of the Central failure relay signaling, Value: 1(1sec.) ... 60(60sec.) |
| 1.3.6.1.4.1.16460.4.2.2.1.20 | Scalarsts_DelayLEDCA | read-write | mandatory | Delay of the Central failure LED signaling, Value: 1(1sec.) ... 60(60sec.) |
| 1.3.6.1.4.1.16460.4.2.2.1.21 | Scalarsts_LCDContrast | read-write | mandatory | LCD contrast from 0% to 100%. Use 10% steps, Value: 0(0%) 10 (10%) 20(20%) ... 90(90%) 100(100%) |
| 1.3.6.1.4.1.16460.4.2.2.1.22 | Scalarsts_Language | read-write | mandatory | LCD Language, Value: 0= English 1= German 2= Polish 3= Swedish 4= Italian |
| 1.3.6.1.4.1.16460.4.2.2.2 | NodeadvancedSettings | |||
| 1.3.6.1.4.1.16460.4.2.2.2.1 | Scalarsts_OpMode | read-write | mandatory | Operation mode, Value: 0= Inverter priority 1= Mains priority |
| 1.3.6.1.4.1.16460.4.2.2.2.2 | Scalarsts_UpperSwitchLimS1 | read-write | mandatory | Source 1 upper switch limit in % of nominal voltage, Value: 5(5%) ... 20(20%) |
| 1.3.6.1.4.1.16460.4.2.2.2.3 | Scalarsts_LowerSwitchLimS1 | read-write | mandatory | Source 1 lower switch limit in % of nominal voltage, Value: 5(5%) ... 20(20%) |
| 1.3.6.1.4.1.16460.4.2.2.2.4 | Scalarsts_SwitchDelayS1 | read-write | mandatory | Source 1 switching delay, if source 1 leave limits, Value: 1= 0.5ms 2= 1.0ms 3= 1.5ms 4= 2.0ms 5= 2.5ms 6= 3.0ms 7= 3.5ms 8= 4.0ms |
| 1.3.6.1.4.1.16460.4.2.2.2.5 | Scalarsts_UpperSwitchLimS2 | read-write | mandatory | Source 2 upper switch limit in % of nominal voltage, Value: 5(5%) ... 20(20%) |
| 1.3.6.1.4.1.16460.4.2.2.2.6 | Scalarsts_LowerSwitchLimS2 | read-write | mandatory | Source 2 lower switch limit in % of nominal voltage, Value: 5(5%) ... 20(20%) |
| 1.3.6.1.4.1.16460.4.2.2.2.7 | Scalarsts_SwitchDelayS2 | read-write | mandatory | Source 2 switching delay, if source 2 leave limits, Value: 1= 0.5ms 2= 1.0ms 3= 1.5ms 4= 2.0ms 5= 2.5ms 6= 3.0ms 7= 3.5ms 8= 4.0ms |
| 1.3.6.1.4.1.16460.4.2.2.2.8 | Scalarsts_MaxCellVolt1 | read-write | mandatory | Umax1 voltage/cell 2,0V - 3,0V, Value: 200(2,0V) ... 300(3,0V) |
| 1.3.6.1.4.1.16460.4.2.2.2.9 | Scalarsts_MinCellVolt1 | read-write | mandatory | Umin1 voltage/cell 0,7V - 2,5V, Value: 70(0,7V) ... 250(2,5V) |
| 1.3.6.1.4.1.16460.4.2.2.2.10 | Scalarsts_MinCellVolt2 | read-write | mandatory | Umin2 voltage/cell 0,6V - 2,5V, Value: 60(0,6V) ... 250(2,5V) |
| 1.3.6.1.4.1.16460.4.2.2.2.11 | Scalarsts_MinULimit | read-write | mandatory | Lower limit voltage/cell for generating error, 1,7V - 2,1V, Value: 170(1,7V) ... 210(2,1V) |
| 1.3.6.1.4.1.16460.4.2.2.2.12 | Scalarsts_MaxULimit | read-write | mandatory | Upper limit voltage/cell for generating error, 2,2V - 2,5V, Value: 220(2,2V) ... 250(2,5V) |
| 1.3.6.1.4.1.16460.4.2.2.3 | NodeadvancedSettings2 | |||
| 1.3.6.1.4.1.16460.4.2.2.3.1 | Scalarsts_NomPower | read-write | mandatory | Power 1,2KVA - 5KVA, Value: 120(1,2KVA) ... 500(5KVA) |
| 1.3.6.1.4.1.16460.4.2.2.3.2 | Scalarsts_NomVolt | read-write | mandatory | Nominal voltage 200VAC - 250VAC, Value: 200(200VAC) ... 250(250VAC) |
| 1.3.6.1.4.1.16460.4.2.2.3.3 | Scalarsts_NomFreq | read-write | mandatory | Nominal frequency 50Hz or 60Hz, Value: 0= 50Hz 1= 60Hz |
| 1.3.6.1.4.1.16460.4.2.2.3.4 | Scalarsts_FreqRange | read-write | mandatory | Frequency range 0,1Hz - 2,0Hz, Value: 1(0,1Hz) ... 20(2,0Hz) |
| 1.3.6.1.4.1.16460.4.2.2.3.5 | Scalarsts_MaxCurrent | read-write | mandatory | Max output current 1,0A - 250A, Value: 10(1,0A) ... 2500(250A) |
| 1.3.6.1.4.1.16460.4.2.2.3.6 | Scalarsts_PresentCell | read-write | mandatory | Number of present battery cell 12 - 200, Value: 12 ... 200 |
| 1.3.6.1.4.1.16460.4.2.2.3.7 | Scalarsts_CellVoltage | read-write | mandatory | Voltage per Cell, Value: 0=2.0V 1=1.2V |
| 1.3.6.1.4.1.16460.4.2.2.3.8 | Scalarsts_Adress | read-write | mandatory | |
| 1.3.6.1.4.1.16460.4.2.2.3.9 | Scalarsts_SigRel2_b0 | read-write | mandatory | Relay 2 failure signal: Source 1 failure, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.10 | Scalarsts_SigRel2_b1 | read-write | mandatory | Relay 2 failure signal: Source 2 failure, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.11 | Scalarsts_SigRel2_b2 | read-write | mandatory | Relay 2 failure signal: Syncronisation error, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.12 | Scalarsts_SigRel2_b3 | read-write | mandatory | Relay 2 failure signal: Inverter failure, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.13 | Scalarsts_SigRel2_b4 | read-write | mandatory | Relay 2 failure signal: STS overtemperature, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.14 | Scalarsts_SigRel2_b5 | read-write | mandatory | Relay 2 failure signal: STS overload, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.15 | Scalarsts_SigRel2_b6 | read-write | mandatory | Relay 2 failure signal: Inverter overload, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.16 | Scalarsts_SigRel2_b7 | read-write | mandatory | Relay 2 failure signal: DC voltage low, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.17 | Scalarsts_SigRel2_b8 | read-write | mandatory | Relay 2 failure signal: DC voltage high, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.18 | Scalarsts_SigRel2_b9 | read-write | mandatory | Relay 2 failure signal: U batterie< warning, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.19 | Scalarsts_SigRel2_b10 | read-write | mandatory | Relay 2 failure signal: U batterie> warning, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.20 | Scalarsts_SigRel2_b11 | read-write | mandatory | Relay 2 failure signal: Fan error, Value: 0= off 1= on |
| 1.3.6.1.4.1.16460.4.2.2.3.21 | Scalarsts_SigRel2_b12 | read-write | mandatory | Relay 2 failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.3.22 | Scalarsts_SigRel2_b13 | read-write | mandatory | Relay 2 failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.3.23 | Scalarsts_SigRel2_b14 | read-write | mandatory | Relay 2 failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.3.24 | Scalarsts_SigRel2_b15 | read-write | mandatory | Relay 2 failure signal: future use |
| 1.3.6.1.4.1.16460.4.2.2.3.25 | Scalarsts_ModeRel2 | read-write | mandatory | Relay 2 mode, Value: 0= normal operation 1= inverted operation |
| 1.3.6.1.4.1.16460.4.2.2.3.26 | Scalarsts_DelayRel2 | read-write | mandatory | Delay of relay 2 signaling 1sec. - 60sec., Value: 1(1sec.) ... 60(60sec.) |
| 1.3.6.1.4.1.16460.4.2.2.3.27 | Scalarsts_OverTemp | read-only | mandatory | STS Overtemperature 85(�C), Value: 85(85�C) |
| 1.3.6.1.4.1.16460.4.3 | NodeextendedSettings | |||
| 1.3.6.1.4.1.16460.4.3.1 | NodenetSyncronisationSet | |||
| 1.3.6.1.4.1.16460.4.3.1.1 | Scalarnet_EdgeDetectionDelay | read-write | mandatory | Edge detection delay 0ms - 20ms, Value: 0(0ms) ... 20(20ms) |
| 1.3.6.1.4.1.16460.4.3.1.2 | Scalarnet_TimeOutDelay | read-write | mandatory | Timeout delay 0ms - 20ms, Value: 0(0ms) ... 20(20ms) |
| 1.3.6.1.4.1.16460.4.3.1.3 | Scalarnet_MaxCorrPhi | read-write | mandatory | Max correction cosinus Phi. 333ns - 84915ns (1dig.=>333ns), Value: 1(333ns) ... 255(84915ns) |
| 1.3.6.1.4.1.16460.4.3.1.4 | Scalarnet_DivDeltaPhi | read-write | mandatory | 1 - 1/256, Value: 0=1 1=1/2 2=1/4 3=1/8 4=1/16 5=1/32 6=1/64 7=1/128 8=1/256 |
| 1.3.6.1.4.1.16460.4.3.1.5 | Scalarnet_DivCorrPhi_I | read-write | mandatory | 1 - 1/256, Value: 0=1 1=1/2 2=1/4 3=1/8 4=1/16 5=1/32 6=1/64 7=1/128 8=1/256 |
| 1.3.6.1.4.1.16460.4.3.1.6 | Scalarnet_MaxCorrT | read-write | mandatory | 333ns - 84915ns (1dig.=>333ns), Value: 1(333ns) ... 255(84915ns) |
| 1.3.6.1.4.1.16460.4.3.1.7 | Scalarnet_DivDeltaT | read-write | mandatory | 1 - 1/256, Value: 0=1 1=1/2 2=1/4 3=1/8 4=1/16 5=1/32 6=1/64 7=1/128 8=1/256 |
| 1.3.6.1.4.1.16460.4.3.1.8 | Scalarnet_SyncOKNr | read-write | mandatory | 1 - 255, Value: 1 ... 255 |
| 1.3.6.1.4.1.16460.4.3.1.9 | Scalarnet_SyncErrorNr | read-write | mandatory | 1 - 255, Value: 1 ... 255 |
| 1.3.6.1.4.1.16460.4.3.1.10 | Scalarnet_P_Diff | read-write | mandatory | 150 - 1500, Value: 150 ... 1500 |
| 1.3.6.1.4.1.16460.4.3.2 | NodeadjustValues | |||
| 1.3.6.1.4.1.16460.4.3.2.1 | Scalaradj_UMains | read-write | mandatory | |
| 1.3.6.1.4.1.16460.4.3.2.2 | Scalaradj_UInv | read-write | mandatory | |
| 1.3.6.1.4.1.16460.4.3.2.3 | Scalaradj_UDC | read-write | mandatory | |
| 1.3.6.1.4.1.16460.4.3.2.4 | Scalaradj_Uout | read-write | mandatory | |
| 1.3.6.1.4.1.16460.4.3.2.5 | Scalaradj_Iout | read-write | mandatory | |
| 1.3.6.1.4.1.16460.4.4 | Nodetables | |||
| 1.3.6.1.4.1.16460.4.4.1 | TablehistoryTable | not-accessible | mandatory | Table of last 20 history events. |
| 1.3.6.1.4.1.16460.4.4.1.1 | RowhistoryEntry | not-accessible | optional | History values entries. |
| 1.3.6.1.4.1.16460.4.4.1.1.0 | ColumnhistIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.16460.4.4.1.1.1 | ColumnhistInd | read-only | mandatory | Index |
| 1.3.6.1.4.1.16460.4.4.1.1.2 | ColumnhistDateTime | read-only | mandatory | Date and time of event in UNIX notation |
| 1.3.6.1.4.1.16460.4.4.1.1.3 | ColumnhistEvent | read-only | mandatory | History event |
| 1.3.6.1.4.1.16460.4.5 | Nodetraps | |||
| 1.3.6.1.4.1.16460.4.5.1 | ScalartrapLastMessageStringTest | not-accessible | mandatory | Message giving more detailed information on alarms. |
| 1.3.6.1.4.1.16460.4.5.2 | ScalartrapLastMessageNbrTest | not-accessible | mandatory | Referenced Trap number |
| 1.3.6.1.4.1.16460.4.5.3 | ScalartrapSourceIPTest | not-accessible | mandatory | Alarm Source IP address |
| 1.3.6.1.4.1.16460.4.5.17 | Scalartrap_source_mains_failue_present | not-accessible | mandatory | STS mains failure present |
| 1.3.6.1.4.1.16460.4.5.18 | Scalartrap_source_inverter_failure_present | not-accessible | mandatory | STS inverter source failure present |
| 1.3.6.1.4.1.16460.4.5.19 | Scalartrap_syncronisation_error_present | not-accessible | mandatory | STS syncronisation error present |
| 1.3.6.1.4.1.16460.4.5.20 | Scalartrap_inverter_failure_present | not-accessible | mandatory | STS inverter failure present |
| 1.3.6.1.4.1.16460.4.5.21 | Scalartrap_no_redundant_inverter_present | not-accessible | mandatory | STS no redundant inverter present |
| 1.3.6.1.4.1.16460.4.5.22 | Scalartrap_critical_inverter_quantity_present | not-accessible | mandatory | STS critical inverter quantity present |
| 1.3.6.1.4.1.16460.4.5.23 | Scalartrap_sts_overtemperature_present | not-accessible | mandatory | STS sts overtemperature present |
| 1.3.6.1.4.1.16460.4.5.24 | Scalartrap_sts_overload_present | not-accessible | mandatory | STS sts overload present |
| 1.3.6.1.4.1.16460.4.5.25 | Scalartrap_inverter_overload_present | not-accessible | mandatory | STS inverter overload present |
| 1.3.6.1.4.1.16460.4.5.26 | Scalartrap_sts_current_need_redandancy_present | not-accessible | mandatory | STS current need redandancy present |
| 1.3.6.1.4.1.16460.4.5.27 | Scalartrap_dc_voltage_low_present | not-accessible | mandatory | STS dc voltage low present |
| 1.3.6.1.4.1.16460.4.5.28 | Scalartrap_dc_voltage_high_present | not-accessible | mandatory | STS DC voltage is high |
| 1.3.6.1.4.1.16460.4.5.29 | Scalartrap_fan_error_present | not-accessible | mandatory | STS Fan is in error-state |
| 1.3.6.1.4.1.16460.4.5.30 | Scalartrap_uout_low_present | not-accessible | mandatory | STS outputvoltage is low |
| 1.3.6.1.4.1.16460.4.5.31 | Scalartrap_u_batterie_lower_warning_present | not-accessible | mandatory | STS Battery voltage is lower warninglevel |
| 1.3.6.1.4.1.16460.4.5.32 | Scalartrap_u_batterie_higher_warning_present | not-accessible | mandatory | Battery voltage is higher warninglevel |
| 1.3.6.1.4.1.16460.4.5.33 | Scalartrap_source_mains_failure_removed | not-accessible | mandatory | Error with Source mains, state is not active |
| 1.3.6.1.4.1.16460.4.5.34 | Scalartrap_source_inverter_failure_removed | not-accessible | mandatory | Error with Source inverter present, state is not active |
| 1.3.6.1.4.1.16460.4.5.35 | Scalartrap_syncronisation_error_removed | not-accessible | mandatory | Syncronisation between Source Mains and Source Inverter lost, state is not active |
| 1.3.6.1.4.1.16460.4.5.36 | Scalartrap_inverter_failure_removed | not-accessible | mandatory | Inverter failure, state is not active |
| 1.3.6.1.4.1.16460.4.5.37 | Scalartrap_no_redundant_inverter_removed | not-accessible | mandatory | No more redundant inverter present, state is not active |
| 1.3.6.1.4.1.16460.4.5.38 | Scalartrap_critical_inverter_quantity_removed | not-accessible | mandatory | Inverter quantity is lower than needed, state is not active |
| 1.3.6.1.4.1.16460.4.5.39 | Scalartrap_sts_overtemperature_removed | not-accessible | mandatory | STS temperature warning is not active |
| 1.3.6.1.4.1.16460.4.5.40 | Scalartrap_sts_overload_removed | not-accessible | mandatory | STS temperature warning is not active |
| 1.3.6.1.4.1.16460.4.5.41 | Scalartrap_inverter_overload_removed | not-accessible | mandatory | Inverter overload is not active |
| 1.3.6.1.4.1.16460.4.5.42 | Scalartrap_sts_current_need_redandancy_removed | not-accessible | mandatory | STS actual current do not need an redundant inverter |
| 1.3.6.1.4.1.16460.4.5.43 | Scalartrap_dc_voltage_low_removed | not-accessible | mandatory | DC voltage is low, state is not active |
| 1.3.6.1.4.1.16460.4.5.44 | Scalartrap_dc_voltage_high_added_removed | not-accessible | mandatory | DC voltage is high, state is not active |
| 1.3.6.1.4.1.16460.4.5.45 | Scalartrap_fan_error_removed | not-accessible | mandatory | Fan is not in error-state |
| 1.3.6.1.4.1.16460.4.5.46 | Scalartrap_uout_low_removed | not-accessible | mandatory | STS outputvoltage is low, state is not active |
| 1.3.6.1.4.1.16460.4.5.47 | Scalartrap_u_batterie_lower_warning_removed | not-accessible | mandatory | Battery voltage is lower warninglevel, state is not active |
| 1.3.6.1.4.1.16460.4.5.48 | Scalartrap_u_batterie_higher_warning_removed | not-accessible | mandatory | Battery voltage is higher warninglevel, state is not active |
| 1.3.6.1.4.1.16460.16 | Nodesource_mains_failue_present_trap | Error with Source mains present | ||
| 1.3.6.1.4.1.16460.17 | Nodesource_inverter_failure_present | Error with Source inverter present | ||
| 1.3.6.1.4.1.16460.18 | Nodesyncronisation_error_present | Syncronisation between Source Mains and Source Inverter lost | ||
| 1.3.6.1.4.1.16460.19 | Nodeinverter_failure_present | Inverter failure active | ||
| 1.3.6.1.4.1.16460.20 | Nodeno_redundant_inverter_present | No more redundant inverter present | ||
| 1.3.6.1.4.1.16460.21 | Nodecritical_inverter_quantity_present | Inverter quantity is lower than needed | ||
| 1.3.6.1.4.1.16460.22 | Nodests_overtemperature_present | STS temperature warning is active | ||
| 1.3.6.1.4.1.16460.23 | Nodests_overload_present | STS overload is active | ||
| 1.3.6.1.4.1.16460.24 | Nodeinverter_overload_present | Inverter overload is active | ||
| 1.3.6.1.4.1.16460.25 | Nodests_current_need_redandancy_present | STS actual current need an redundant inverter | ||
| 1.3.6.1.4.1.16460.26 | Nodedc_voltage_low_present | DC voltage is low | ||
| 1.3.6.1.4.1.16460.27 | Nodedc_voltage_high_present | DC voltage is high | ||
| 1.3.6.1.4.1.16460.28 | Nodefan_error_present | Fan is in error-state | ||
| 1.3.6.1.4.1.16460.29 | Nodeuout_low_present | STS outputvoltage is low | ||
| 1.3.6.1.4.1.16460.30 | Nodeu_batterie_lower_warning_present | Battery voltage is lower warninglevel | ||
| 1.3.6.1.4.1.16460.31 | Nodeu_batterie_higher_warning_present | Battery voltage is higher warninglevel | ||
| 1.3.6.1.4.1.16460.32 | Nodesource_mains_failure_removed | Error with Source mains, state is not active | ||
| 1.3.6.1.4.1.16460.33 | Nodesource_inverter_failure_removed | Error with Source inverter present, state is not active | ||
| 1.3.6.1.4.1.16460.34 | Nodesyncronisation_error_removed | Syncronisation between Source Mains and Source Inverter lost, state is not active | ||
| 1.3.6.1.4.1.16460.35 | Nodeinverter_failure_removed | Inverter failure, state is not active | ||
| 1.3.6.1.4.1.16460.36 | Nodeno_redundant_inverter_removed | No more redundant inverter present, state is not active | ||
| 1.3.6.1.4.1.16460.37 | Nodecritical_inverter_quantity_removed | Inverter quantity is lower than needed, state is not active | ||
| 1.3.6.1.4.1.16460.38 | Nodests_overtemperature_removed | STS temperature warning is not active | ||
| 1.3.6.1.4.1.16460.39 | Nodests_overload_removed | STS overload is not active | ||
| 1.3.6.1.4.1.16460.40 | Nodeinverter_overload_removed | Inverter overload is not active | ||
| 1.3.6.1.4.1.16460.41 | Nodests_current_need_redandancy_removed | STS actual current do not need an redundant inverter | ||
| 1.3.6.1.4.1.16460.42 | Nodedc_voltage_low_removed | DC voltage is low, state is not active | ||
| 1.3.6.1.4.1.16460.43 | Nodedc_voltage_high_added_removed | DC voltage is high, state is not active | ||
| 1.3.6.1.4.1.16460.44 | Nodefan_error_removed | Fan is not in error-state | ||
| 1.3.6.1.4.1.16460.45 | Nodeuout_low_removed | STS outputvoltage is low, state is not active | ||
| 1.3.6.1.4.1.16460.46 | Nodeu_batterie_lower_warning_removed | Battery voltage is lower warninglevel, state is not active | ||
| 1.3.6.1.4.1.16460.47 | Nodeu_batterie_higher_warning_removed | Battery voltage is higher warninglevel, state is not active |