MIB Viewer

SUB10SYSTEMS-MIB

666 objects
Sub10 Systems MIB
Imported Objects
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString RowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.39003Identitysub10SystemsSub10 Systems MIB
1.3.6.1.4.1.39003.0Nodesub10Notifications
1.3.6.1.4.1.39003.0.1Notificationsub10UnitAlarmcurrentA measured object relating the Unit subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarm…
1.3.6.1.4.1.39003.0.2Notificationsub10EthernetAlarmcurrentA measured object relating the Ethernet subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtA…
1.3.6.1.4.1.39003.0.3Notificationsub10RadioAlarmcurrentA measured object relating the Radio subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlar…
1.3.6.1.4.1.39003.3Nodesub10Unit
1.3.6.1.4.1.39003.3.1Nodesub10UnitStatus
1.3.6.1.4.1.39003.3.1.1Nodesub10UnitLocalStatus
1.3.6.1.4.1.39003.3.1.1.1Scalarsub10UnitLclTimeread-onlycurrentThe local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15
1.3.6.1.4.1.39003.3.1.1.2Scalarsub10UnitLclUnitTyperead-onlycurrentUniquely identifies the local unit product type
1.3.6.1.4.1.39003.3.1.1.3Scalarsub10UnitLclDescriptionread-onlycurrentThe description of the local unit. This is synonymous with MIB-II sysDescr.
1.3.6.1.4.1.39003.3.1.1.4Scalarsub10UnitLclHWSerialNumberread-onlycurrentThe hardware serial number of the Local Unit. This also identifies whether the unit is a V-band or E-band product. See sub10UnitLclMWUType.
1.3.6.1.4.1.39003.3.1.1.5Scalarsub10UnitLclTerminalNameread-onlycurrentThe administratively assigned name for the unit. This is synonymous with MIB-II sysName and can be administratively set via either sysName or sub10UnitMgmtTerm…
1.3.6.1.4.1.39003.3.1.1.6Scalarsub10UnitLclTerminalTyperead-onlycurrentUniquely identifies the local terminal type A or B.
1.3.6.1.4.1.39003.3.1.1.7Scalarsub10UnitLclLinkNameread-onlycurrentThe administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link…
1.3.6.1.4.1.39003.3.1.1.8Scalarsub10UnitLclLinkIdread-onlycurrentThe administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote unit…
1.3.6.1.4.1.39003.3.1.1.9Scalarsub10UnitLclSiteNameread-onlycurrentThe administratively assigned physical location of the local unit.
1.3.6.1.4.1.39003.3.1.1.10Scalarsub10UnitLclFirmwareLoadedBankread-onlycurrentCurrently loaded bank. The firmware version running in this bank is defined by sub10UnitLclFirmwareVersion.
1.3.6.1.4.1.39003.3.1.1.11Scalarsub10UnitLclFirmwareVersionread-onlycurrentThe firmware version currently running on the local unit. This is by definition the firmware loaded into the bank number defined in sub10UnitLclFirmwareLoadedB…
1.3.6.1.4.1.39003.3.1.1.12Scalarsub10UnitLclIpAddressread-onlycurrentThe IP address of the local ethernet interface.
1.3.6.1.4.1.39003.3.1.1.13Scalarsub10UnitLclMWUTemperatureread-onlycurrentThe modem temperature on the local unit in degrees celsius.
1.3.6.1.4.1.39003.3.1.1.14Scalarsub10UnitLclNTPSyncStatusread-onlycurrentThe indication that the systems clock is synchronised with the NTP server.
1.3.6.1.4.1.39003.3.1.1.15Tablesub10UnitLclAlarmStateTablenot-accessiblecurrentThe table listing the each active alarm the local unit. An active alarm is where the alarm state is 'raised' at the specific severity level. The entries in the…
1.3.6.1.4.1.39003.3.1.1.15.1Rowsub10UnitLclAlarmStateEntrynot-accessiblecurrentAn entry (row) in the sub10UnitLclAlarmStateTable.
1.3.6.1.4.1.39003.3.1.1.15.1.1Columnsub10UnitLclAlarmStateIndexnot-accessiblecurrentThe sub10UnitLclAlarmStateTable index. The index represents the same index as used in sub10UnitMgmtAlarmTable. The entries in the table correspond to the confi…
1.3.6.1.4.1.39003.3.1.1.15.1.2Columnsub10UnitLclAlarmStateread-onlycurrentInternal object to indicate if this alarm is currently in the raised or cleared state.
1.3.6.1.4.1.39003.3.1.1.15.1.3Columnsub10UnitLclAlarmStateTimeread-onlycurrentThe local date and time when the last Alarm State transition occurred. This object facilitates retrieving all instances of alarms that have been raised or have…
1.3.6.1.4.1.39003.3.1.1.16Scalarsub10UnitLclRadioDataRateread-onlycurrentThe maximum data rate of the Airside interface. This has the same value as sub10RadioLclDataRate.
1.3.6.1.4.1.39003.3.1.1.17Scalarsub10UnitLclMWUTyperead-onlycurrentThe local MWU type
1.3.6.1.4.1.39003.3.1.1.18Scalarsub10UnitLclFPGAVersionread-onlycurrentThe FPGA Version.
1.3.6.1.4.1.39003.3.1.2Nodesub10UnitRemoteStatus
1.3.6.1.4.1.39003.3.1.2.1Scalarsub10UnitRmtUnitTyperead-onlycurrentUniquely identifies the remote unit product type
1.3.6.1.4.1.39003.3.1.2.2Scalarsub10UnitRmtTimeread-onlycurrentThe remote unit local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15
1.3.6.1.4.1.39003.3.1.2.3Scalarsub10UnitRmtTerminalNameread-onlycurrentThe administratively assigned name for the remote unit. This is synonymous with MIB-II sysName.
1.3.6.1.4.1.39003.3.1.2.4Scalarsub10UnitRmtTerminalTyperead-onlycurrentUniquely identifies the remote terminal type A or B.
1.3.6.1.4.1.39003.3.1.2.5Scalarsub10UnitRmtLinkNameread-onlycurrentThe administratively assigned name on the remote unit for the radio link between the local and remote units. This generally identifies geographically the two e…
1.3.6.1.4.1.39003.3.1.2.6Scalarsub10UnitRmtLinkIdread-onlycurrentThe administratively assigned identifier on the remote unit for the radio link between the local and remote units. The LinkId must be the same value on both lo…
1.3.6.1.4.1.39003.3.1.2.7Scalarsub10UnitRmtHWSerialNumberread-onlycurrentThe hardware serial number of the Remote Unit. This also identifies whether the unit is a V-band or E-band product.
1.3.6.1.4.1.39003.3.1.2.8Scalarsub10UnitRmtFirmwareVersionread-onlycurrentThe firmware version currently running on the remote unit. This is by definition the firmware loaded into the bank currently used for boot. See sub10UnitMgmtFi…
1.3.6.1.4.1.39003.3.1.2.9Scalarsub10UnitRmtIpAddressread-onlycurrentThe IP address of the remote ethernet interface.
1.3.6.1.4.1.39003.3.1.2.10Scalarsub10UnitRmtMWUTemperatureread-onlycurrentThe modem temperature on the local unit in degrees celsius.
1.3.6.1.4.1.39003.3.2Nodesub10UnitMgmt
1.3.6.1.4.1.39003.3.2.1Nodesub10UnitMgmtSystem
1.3.6.1.4.1.39003.3.2.1.1Scalarsub10UnitMgmtTerminalNameread-writecurrentThe administratively assigned name for the unit. This is synonymous with MIB-II sysName and sub10UnitLocalStatus sub10UnitLclTerminalName.
1.3.6.1.4.1.39003.3.2.1.2Scalarsub10UnitMgmtLinkNameread-writecurrentThe administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link…
1.3.6.1.4.1.39003.3.2.1.3Scalarsub10UnitMgmtLinkIdread-writecurrentThe administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote unit…
1.3.6.1.4.1.39003.3.2.1.4Scalarsub10UnitMgmtSiteNameread-writecurrentThe administratively assigned physical location of the unit. This is synonymous with MIB-II sysLocation and sub10UnitLocalStatus sub10UnitLclSiteName.
1.3.6.1.4.1.39003.3.2.1.5Scalarsub10UnitMgmtContactNameread-writecurrentThe administratively assigned contact for support of the unit. This is synonymous with MIB-II sysContact and sub10UnitLocalStatus sub10UnitLclContactName.
1.3.6.1.4.1.39003.3.2.2Nodesub10UnitMgmtIp
1.3.6.1.4.1.39003.3.2.2.1Scalarsub10UnitMgmtIpModeread-writecurrentIP Address configuration is either manually set as ipv4 or ipv6 type addreessing or alternatively can be dynamically assigned automatically using the Dynamic H…
1.3.6.1.4.1.39003.3.2.2.2Scalarsub10UnitMgmtIpAddressread-writecurrentThe administratively assigned IP Address for the management channel. This is reflected in the MIB-II ipAddrTable. IMPORTANT: This object is controlled by trans…
1.3.6.1.4.1.39003.3.2.2.3Scalarsub10UnitMgmtIpSubnetMaskread-writecurrentThe administratively assigned sub-net mask for the management channel. This is reflected in the MIB-II ipAddrTable. IMPORTANT: This object is controlled by tra…
1.3.6.1.4.1.39003.3.2.2.4Scalarsub10UnitMgmtIpDefGatewayread-writecurrentThe administratively assigned default gateway for the management channel. IMPORTANT: This object is controlled by transaction management. Any changes to this o…
1.3.6.1.4.1.39003.3.2.2.5Scalarsub10UnitMgmtIpDHCPread-writecurrentDynamic Host Control Protocol (DHCP) is enabled or disabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be…
1.3.6.1.4.1.39003.3.2.3Nodesub10UnitMgmtVlan
1.3.6.1.4.1.39003.3.2.3.1Scalarsub10UnitMgmtVlanStateread-writecurrentEnable VLAN for Management traffic. .
1.3.6.1.4.1.39003.3.2.3.2Scalarsub10UnitMgmtVlanIdread-writecurrentThe VLAN Id used to carry management traffic. Only valid when the object is set to a non-zero value. IMPORTANT: This object is controlled by transaction manage…
1.3.6.1.4.1.39003.3.2.3.3Scalarsub10UnitMgmtVlanPriorityread-writecurrentThe VLAN priority inserted into the ethernet frame for all management traffic. Only valid when the object sub10UnitMgmtVlanId is set to non zero. IMPORTANT: Th…
1.3.6.1.4.1.39003.3.2.3.4Scalarsub10UnitMgmtVlanDSCPread-writecurrentThe Differentiated Services Code Point priority inserted into the IP header of all management traffic. IMPORTANT: This object is controlled by transaction mana…
1.3.6.1.4.1.39003.3.2.3.5Scalarsub10UnitMgmtVlanDEIread-writecurrentSet the Drop Eligible Indicator inserted into the ethernet frame for all management traffic. Only valid when the object sub10UnitMgmtVlanId is set to non zero.…
1.3.6.1.4.1.39003.3.2.4Nodesub10UnitMgmtUsers
1.3.6.1.4.1.39003.3.2.4.1Scalarsub10UnitMgmtUsersNumberread-onlycurrentThe number of valid sub10UnitMgmtUsersTable table entries present on this system.
1.3.6.1.4.1.39003.3.2.4.2Tablesub10UnitMgmtUserTablenot-accessiblecurrentThe table listing the users configured on the unit. The number of user entries is sub10UnitMgmtUsersNumber. This table is indexed by user name (sub10UnitMgmtUs…
1.3.6.1.4.1.39003.3.2.4.2.1Rowsub10UnitMgmtUserEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtUserTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Usag…
1.3.6.1.4.1.39003.3.2.4.2.1.1Columnsub10UnitMgmtUserIndexnot-accessiblecurrentThe sub10UnitMgmtUserTable index.
1.3.6.1.4.1.39003.3.2.4.2.1.2Columnsub10UnitMgmtUserRowStatusread-createcurrentThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or n…
1.3.6.1.4.1.39003.3.2.4.2.1.3Columnsub10UnitMgmtUserNameread-writecurrentThe unique user name provided by the system administrator.
1.3.6.1.4.1.39003.3.2.4.2.1.4Columnsub10UnitMgmtUserGroupread-writecurrentThe user group provided by the system administrator. This restricts a user to certain key functions on the web GUI.
1.3.6.1.4.1.39003.3.2.4.2.1.5Columnsub10UnitMgmtUserPasswordread-writecurrentThe unique user password provided by the system administrator. This object can be set but is not visible when read.
1.3.6.1.4.1.39003.3.2.4.2.1.6Columnsub10UnitMgmtUserPasswordVerifyread-writecurrentThe unique user password provided by the system administrator use to verify the setting of sub10UnitMgmtUserPassword. This object can be set but is not visible…
1.3.6.1.4.1.39003.3.2.5Nodesub10UnitMgmtTime
1.3.6.1.4.1.39003.3.2.5.1Scalarsub10UnitMgmtTimeLocalread-writecurrentThe administratively assigned system time defined as a display string in the format:- YYYY-MM-DD HH:MM:SS e.g. 2014-05-26 13:30:15
1.3.6.1.4.1.39003.3.2.5.2Scalarsub10UnitMgmtTimeNTPEnabledread-writecurrentThe administratively assigned state to enable or disable NTP. system cloack assignment automatically using the Network Time Protocol (NTP).
1.3.6.1.4.1.39003.3.2.5.3Scalarsub10UnitMgmtTimeNTPServer1read-writecurrentThe administratively assigned primary NTP Server name.
1.3.6.1.4.1.39003.3.2.5.4Scalarsub10UnitMgmtTimeNTPServer2read-writecurrentThe administratively assigned secondary NTP Server name to be used when the primary server is not responding.
1.3.6.1.4.1.39003.3.2.5.5Scalarsub10UnitMgmtTimeNTPPortread-writecurrentThe administratively assigned NTP Port number name to be used when contacting the NTP server.
1.3.6.1.4.1.39003.3.2.5.6Scalarsub10UnitMgmtTimeNTPSyncStatusread-onlycurrentThe indication that the systems clock is synchronised with the NTP server.
1.3.6.1.4.1.39003.3.2.5.7Scalarsub10UnitMgmtDateTimeread-writecurrentThe administratively assigned system defined as a standard date-time specification. field octets contents range 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1.…
1.3.6.1.4.1.39003.3.2.6Nodesub10UnitMgmtAlarms
1.3.6.1.4.1.39003.3.2.6.1Tablesub10UnitMgmtAlarmTablenot-accessiblecurrentThe sub10UnitMgmtAlarmTable defines the alarm configuration. The first 'N' rows of the table is reserved for fixed alarms defined by the manufacturer. Fixed al…
1.3.6.1.4.1.39003.3.2.6.1.1Rowsub10UnitMgmtAlarmEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtAlarmTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned.
1.3.6.1.4.1.39003.3.2.6.1.1.1Columnsub10UnitMgmtAlarmIndexnot-accessiblecurrentThe sub10UnitMgmtAlarmTable index.
1.3.6.1.4.1.39003.3.2.6.1.1.2Columnsub10UnitMgmtAlarmRowStatusread-createcurrentThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or n…
1.3.6.1.4.1.39003.3.2.6.1.1.3Columnsub10UnitMgmtAlarmNameread-writecurrentThe alarm name. This is a short descriptive name for the alarm. Alarm names can be duplicated across entries in order to define the same alarm to be raised and…
1.3.6.1.4.1.39003.3.2.6.1.1.4Columnsub10UnitMgmtAlarmSeverityread-writecurrentThe alarm severity. This is added to each alarm as a parameter.
1.3.6.1.4.1.39003.3.2.6.1.1.5Columnsub10UnitMgmtAlarmMeasObjectread-writecurrentThe measured object. This is the object name of the object in the MIB with which the alarm is associated and which the configured thresholds are compared with …
1.3.6.1.4.1.39003.3.2.6.1.1.6Columnsub10UnitMgmtAlarmMonitorIntvlread-writecurrentThe interval in seconds when the measured object is to be read and compared with the raise and clear thresholds. An alarm cannot be raised or cleared quicker t…
1.3.6.1.4.1.39003.3.2.6.1.1.7Columnsub10UnitMgmtAlarmRaiseOperread-writecurrentType of operation which determines when an alarm is to be raised. Definition of each type is as follows: lt - Measured objects value is less than raise thresho…
1.3.6.1.4.1.39003.3.2.6.1.1.8Columnsub10UnitMgmtAlarmRaiseThreshread-writecurrentThe threshold value which the measured object's value crosses causes the alarm to be raised. The behaviour of a measured value and alarm threshold comparison i…
1.3.6.1.4.1.39003.3.2.6.1.1.9Columnsub10UnitMgmtAlarmClearOperread-writecurrentType of operation which determines when an alarm is to be cleared. Definition of each type is as follows: lt - Measured objects value is less than clear thresh…
1.3.6.1.4.1.39003.3.2.6.1.1.10Columnsub10UnitMgmtAlarmClearThreshread-writecurrentThe threshold value which the measured object's value crosses causes the alarm to be cleared. The behaviour of a measured value and alarm threshold comparison …
1.3.6.1.4.1.39003.3.2.6.1.1.11Columnsub10UnitMgmtAlarmRaiseIntvlsread-writecurrentThe number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the raise threshold before the alarm s…
1.3.6.1.4.1.39003.3.2.6.1.1.12Columnsub10UnitMgmtAlarmClearIntvlsread-writecurrentThe number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the clear threshold before the alarm s…
1.3.6.1.4.1.39003.3.2.6.1.1.13Columnsub10UnitMgmtAlarmTyperead-writecurrentThe type of the alarm and defines the type of notification (trap) used to inform management entities.
1.3.6.1.4.1.39003.3.2.6.1.1.14Columnsub10UnitMgmtAlarmSmtpAddressread-writecurrentThe smtp mail address. If set the alarm is suitable formatted and sent to the given mail address.
1.3.6.1.4.1.39003.3.2.6.1.1.15Columnsub10UnitMgmtAlarmToSyslogread-writecurrentIf set to 'enabled' the alarm is suitably formatted and sent to syslog.
1.3.6.1.4.1.39003.3.2.6.1.1.16Columnsub10UnitMgmtAlarmEnabledread-writecurrentIf set to 'enabled' the alarm is enabled.
1.3.6.1.4.1.39003.3.2.6.1.1.17Columnsub10UnitMgmtAlarmMeasObjectValread-onlycurrentThe value of sub10UnitMgmtAlarmMeasObject formatted as a displayString which when measured by the alarm subsystem caused an alarm to be either raised or cleare…
1.3.6.1.4.1.39003.3.2.6.1.1.18Columnsub10UnitMgmtAlarmToSNMPread-writecurrentIf set to 'enabled' the alarm is forwarded as an SNMP notification / trap.
1.3.6.1.4.1.39003.3.2.6.2Scalarsub10UnitMgmtAlarmsUserDefStartread-onlycurrentThis defines the row index from which point rows in the sub10UnitMgmtAlarmTable can be created and deleted and therefore where user defined alarms start. Any a…
1.3.6.1.4.1.39003.3.2.7Nodesub10UnitMgmtSnmp
1.3.6.1.4.1.39003.3.2.7.1Scalarsub10UnitMgmtSnmpAgentread-writecurrentIf set to 'enabled' the agent will respond to valid v1/2c SNMP requests for GET/SET/GET-NEXT of supported MIB objects. If this object and the object sub10UnitM…
1.3.6.1.4.1.39003.3.2.7.2Scalarsub10UnitMgmtSnmpTrapsread-writecurrentIf set to 'enabled' the agent will forward traps to all configured trap destinations. If disabled traps are discarded. Traps are not sent if sub10UnitMgmtSnmpA…
1.3.6.1.4.1.39003.3.2.7.3Scalarsub10UnitMgmtSnmpv320Mibread-writecurrentIf set to 'enabled' the agent will support the Sub10 Systems v320 legacy MIB (LIBERATOR-MIB) objects and traps.
1.3.6.1.4.1.39003.3.2.7.4Scalarsub10UnitMgmtSnmpv3read-writecurrentIf set to 'enabled' the agent will support SNMPv3 PDUs and the SNMPv3 MIB configuration. This can be set to enabled or disabled independently of the object sub…
1.3.6.1.4.1.39003.3.2.7.5Tablesub10UnitMgmtSnmpTrpDstTablenot-accessiblecurrentThe table listing the each trap destination the local unit. Each trap destination has an IpAddress and a trap community string
1.3.6.1.4.1.39003.3.2.7.5.1Rowsub10UnitMgmtSnmpTrpDstEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtSnmpTrpDstTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned.
1.3.6.1.4.1.39003.3.2.7.5.1.1Columnsub10UnitMgmtSnmpTrpDstIndexnot-accessiblecurrentThe sub10UnitMgmtSnmpTrpDstTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for t…
1.3.6.1.4.1.39003.3.2.7.5.1.2Columnsub10UnitMgmtSnmpTrpDstRowStatusread-createcurrentThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or n…
1.3.6.1.4.1.39003.3.2.7.5.1.3Columnsub10UnitMgmtSnmpTrpDstIpAddrread-writecurrentThe administratively assigned SNMP Trap Destination IP.
1.3.6.1.4.1.39003.3.2.7.5.1.4Columnsub10UnitMgmtSnmpTrpDstCommunityread-writecurrentThe trap community name sent with each trap to this trap destination. The trap community allows for some security in the target management terminal
1.3.6.1.4.1.39003.3.2.7.6Scalarsub10UnitMgmtSnmpEngineIdFormatread-writecurrentThe format of this SNMP v3 agent's engine id. The engine id is administratively defined and is between 5 and 32 characters long and can be based on a number of…
1.3.6.1.4.1.39003.3.2.7.7Scalarsub10UnitMgmtSnmpEngineIdTextread-writecurrentWhen sub10UnitMgmtSnmpEngineIdFormat='textString(4)' this object contains the administratively defined string used to build the SNMP v3 engine id in sub10UnitM…
1.3.6.1.4.1.39003.3.2.7.8Scalarsub10UnitMgmtSnmpEngineIdread-onlycurrentThe administratively assigned SNMP v3 engine id. The construction of the engine id is dependant on the setting of sub10UnitMgmtSnmpEngineIdFormat and must be u…
1.3.6.1.4.1.39003.3.2.7.9Scalarsub10UnitMgmtSnmpOperAuthProtoread-writecurrentThe authentication protocol currently assigned to users of group type operation.
1.3.6.1.4.1.39003.3.2.7.10Scalarsub10UnitMgmtSnmpOperPrivProtoread-writecurrentThe privacy protocol currently assigned to users of group type operation.
1.3.6.1.4.1.39003.3.2.7.11Scalarsub10UnitMgmtSnmpAdminAuthProtoread-writecurrentThe authentication protocol currently assigned to users of group type administration.
1.3.6.1.4.1.39003.3.2.7.12Scalarsub10UnitMgmtSnmpAdminPrivProtoread-writecurrentThe privacy protocol currently assigned to users of group type administration.
1.3.6.1.4.1.39003.3.2.7.13Scalarsub10UnitMgmtSnmpMaintAuthProtoread-writecurrentThe authentication protocol currently assigned to users of group type maintenance.
1.3.6.1.4.1.39003.3.2.7.14Scalarsub10UnitMgmtSnmpMaintPrivProtoread-writecurrentThe privacy protocol currently assigned to users of group type maintenance.
1.3.6.1.4.1.39003.3.2.7.15Tablesub10UnitMgmtSnmpUserTablenot-accessiblecurrentThe table of SNMPv3 User configuration.
1.3.6.1.4.1.39003.3.2.7.15.1Rowsub10UnitMgmtSnmpUserEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtSnmpUserTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned.
1.3.6.1.4.1.39003.3.2.7.15.1.1Columnsub10UnitMgmtSnmpUserIndexnot-accessiblecurrentThe sub10UnitMgmtSnmpUserTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the…
1.3.6.1.4.1.39003.3.2.7.15.1.2Columnsub10UnitMgmtSnmpUserRowStatusread-createcurrentThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or n…
1.3.6.1.4.1.39003.3.2.7.15.1.3Columnsub10UnitMgmtSnmpUserNameread-writecurrentThe administratively assigned SNMPv3 User name.
1.3.6.1.4.1.39003.3.2.7.15.1.4Columnsub10UnitMgmtSnmpUserGroupread-writecurrentThe user group type. Authentication and Privacy policies are assigned to a user group and not individual users.
1.3.6.1.4.1.39003.3.2.7.15.1.5Columnsub10UnitMgmtSnmpUserAuthPwdread-writecurrentThe unique SNMPv3 authentication protocol password provided by the system administrator. This object can be set but is not visible when read.
1.3.6.1.4.1.39003.3.2.7.15.1.6Columnsub10UnitMgmtSnmpUserAuthPwdChkread-writecurrentThe unique SNMPv3 authentication protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserAuthPassword. This o…
1.3.6.1.4.1.39003.3.2.7.15.1.7Columnsub10UnitMgmtSnmpUserPrivPwdread-writecurrentThe unique SNMPv3 privacy protocol password provided by the system administrator. This object can be set but is not visible when read.
1.3.6.1.4.1.39003.3.2.7.15.1.8Columnsub10UnitMgmtSnmpUserPrivPwdChkread-writecurrentThe unique SNMPv3 privacy protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserPrivPassword. This object c…
1.3.6.1.4.1.39003.3.2.7.16Tablesub10UnitMgmtSnmpAccessTablenot-accessiblecurrentThe table of SNMPv3 Access configuration.
1.3.6.1.4.1.39003.3.2.7.16.1Rowsub10UnitMgmtSnmpAccessEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtSnmpAccessTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned.
1.3.6.1.4.1.39003.3.2.7.16.1.1Columnsub10UnitMgmtSnmpAccessIndexnot-accessiblecurrentThe sub10UnitMgmtSnmpAccessTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for t…
1.3.6.1.4.1.39003.3.2.7.16.1.2Columnsub10UnitMgmtSnmpAccessRowStatusread-createcurrentThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or n…
1.3.6.1.4.1.39003.3.2.7.16.1.3Columnsub10UnitMgmtSnmpAccessNameread-writecurrentThe administratively assigned SNMPv3 access name. This is used as an alias for the access address for purposes of identification. The name is not used in the S…
1.3.6.1.4.1.39003.3.2.7.16.1.4Columnsub10UnitMgmtSnmpAccessIpAddrread-writecurrentThe administratively assigned SNMP access IP address. Only SNMP requests from this address will be serviced by the SNMP agent.
1.3.6.1.4.1.39003.3.2.7.17Tablesub10UnitMgmtSnmpTargetTablenot-accessiblecurrentThe table of SNMPv3 Target configuration. This table defines the addresses of target SNMPv3 managers to send Notifications.
1.3.6.1.4.1.39003.3.2.7.17.1Rowsub10UnitMgmtSnmpTargetEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtSnmpTargetTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned.
1.3.6.1.4.1.39003.3.2.7.17.1.1Columnsub10UnitMgmtSnmpTargetIndexnot-accessiblecurrentThe sub10UnitMgmtSnmpTargetTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for t…
1.3.6.1.4.1.39003.3.2.7.17.1.2Columnsub10UnitMgmtSnmpTargetRowStatusread-createcurrentThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or n…
1.3.6.1.4.1.39003.3.2.7.17.1.3Columnsub10UnitMgmtSnmpTargetNameread-writecurrentThe administratively assigned SNMPv3 target name.
1.3.6.1.4.1.39003.3.2.7.17.1.4Columnsub10UnitMgmtSnmpTargetIpAddrread-writecurrentThe administratively assigned SNMP target IP address. When enabled SNMPv3 Notifications are sent to this address.
1.3.6.1.4.1.39003.3.2.7.17.1.5Columnsub10UnitMgmtSnmpTargetUserNameread-writecurrentThe administratively assigned SNMPv3 target user name. The security model configured for this user is used when sending notifications to the target address.
1.3.6.1.4.1.39003.3.2.8Nodesub10UnitMgmtSmtp
1.3.6.1.4.1.39003.3.2.9Nodesub10UnitMgmtFirmware
1.3.6.1.4.1.39003.3.2.9.1Scalarsub10UnitMgmtFirmwareSelectBankread-writecurrentCurrently selected bank which unit uses to boot.
1.3.6.1.4.1.39003.3.2.9.2Scalarsub10UnitMgmtFirmwareLoadedBankread-onlycurrentCurrently loaded bank. The firmware version number running in this bank is defined by sub10UnitMgmtFirmwareVersion.
1.3.6.1.4.1.39003.3.2.9.3Scalarsub10UnitMgmtFirmwareVersionread-onlycurrentThe firmware version currently running on the local unit. This is the version of the firmware loaded into the bank number defined in sub10UnitMgmtFirmwareLoade…
1.3.6.1.4.1.39003.3.2.9.4Scalarsub10UnitMgmtFirmwareBootVersionread-onlycurrentThe firmware boot version currently running on the local unit. This is the boot version of the firmware loaded into the bank number defined in sub10UnitMgmtFir…
1.3.6.1.4.1.39003.3.2.9.5Scalarsub10UnitMgmtFirmwareActionread-writecurrentThe firmware bank action object is used to perform certain actions on a firmware bank. Using this it is possible to reboot the unit, copy banks and upload soft…
1.3.6.1.4.1.39003.3.2.9.6Tablesub10UnitMgmtFirmwareBankTablenot-accessiblecurrentThis tables contains information regarding the firmware banks.
1.3.6.1.4.1.39003.3.2.9.6.1Rowsub10UnitMgmtFirmwareBankEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtFirmwareBankTable.
1.3.6.1.4.1.39003.3.2.9.6.1.1Columnsub10UnitMgmtFirmwareBankIndexnot-accessiblecurrentThe sub10UnitMgmtFirmwareBankTable index.
1.3.6.1.4.1.39003.3.2.9.6.1.2Columnsub10UnitMgmtFirmwareBankVersionread-onlycurrentThe firmware version currently installed in this bank.
1.3.6.1.4.1.39003.3.2.9.6.1.3Columnsub10UnitMgmtFirmwareBankImageread-onlycurrentThe firmware image name currently installed in this bank.
1.3.6.1.4.1.39003.3.2.9.7Scalarsub10UnitMgmtFirmwareUplImageread-writecurrentThe firmware image name to be uploaded from the server defined by 'sub10UnitFirmwareUplServerIp' using the firmware action 'sub10UnitFirmwareAction=fmwUpload(4…
1.3.6.1.4.1.39003.3.2.9.8Scalarsub10UnitMgmtFirmwareUplSvrIpread-writecurrentThe IP address of the server used to upload the firmware image defined by sub10UnitMgmtFirmwareUplImage.
1.3.6.1.4.1.39003.3.2.9.9Scalarsub10UnitMgmtFirmwareFromBankread-onlycurrentThe bank currently being copied from by the Firmware action sub10UnitMgmtFirmwareAction = fmwCopyInactiveBank(4).
1.3.6.1.4.1.39003.3.2.9.10Scalarsub10UnitMgmtFirmwareToBankread-onlycurrentThe bank currently being uploaded or copied to by the Firmware actions sub10UnitMgmtFirmwareAction = fmwUploadInactiveBank(4) or sub10UnitMgmtFirmwareAction = …
1.3.6.1.4.1.39003.3.2.9.11Scalarsub10UnitMgmtFirmwareActStatusread-onlycurrentThe status of the firmware bank action which can be repeatedly read using a Get to report the progress of the the action and verify that it has either succeede…
1.3.6.1.4.1.39003.3.2.9.12Scalarsub10UnitMgmtFirmwareActProgressread-onlycurrentThe % progress of firmware action when loading the firmware image to a firmware bank or copying a firmware image from on1 bank to another bank.
1.3.6.1.4.1.39003.3.2.10Nodesub10UnitMgmtDNS
1.3.6.1.4.1.39003.3.2.10.1Tablesub10UnitMgmtDNSTablenot-accessiblecurrentThis tables defines the Domain Name Servers.
1.3.6.1.4.1.39003.3.2.10.1.1Rowsub10UnitMgmtDNSEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtDNSTable.
1.3.6.1.4.1.39003.3.2.10.1.1.1Columnsub10UnitMgmtDNSIndexnot-accessiblecurrentThe sub10UnitMgmtDNSTable index.
1.3.6.1.4.1.39003.3.2.10.1.1.2Columnsub10UnitMgmtDNServerread-writecurrentThe administratively assigned DNS server IP for the unit. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be tr…
1.3.6.1.4.1.39003.3.2.11Nodesub10UnitMgmtEncryption
1.3.6.1.4.1.39003.3.2.11.1Scalarsub10UnitMgmtEncryptModeread-writecurrentThe administratively assigned License key for the unit. The license key enables capabilities within the unit. The capabilities currently available by the confi…
1.3.6.1.4.1.39003.3.2.11.2Scalarsub10UnitMgmtEncryptKeyread-writecurrentThe administratively assigned Encryption key.
1.3.6.1.4.1.39003.3.2.12Nodesub10UnitMgmtLicense
1.3.6.1.4.1.39003.3.2.12.1Scalarsub10UnitMgmtLicenseKeyread-writecurrentThe administratively assigned License key for the unit. The license key enables capabilities within the unit. The capabilities currently available by the confi…
1.3.6.1.4.1.39003.3.2.12.2Scalarsub10UnitMgmtLicenseAESread-onlycurrentIndication if AES encryption is included in the current license key.
1.3.6.1.4.1.39003.3.2.13Nodesub10UnitMgmtSyncE
1.3.6.1.4.1.39003.3.2.13.1Scalarsub10UnitMgmtSyncEModeread-writecurrentThe SyncE Mode. Setting this to syncEProvider(1) configures the unit as a Slave clock. In this case the unit at the other end of the link should be set to sync…
1.3.6.1.4.1.39003.3.2.20Nodesub10UnitMgmtActions
1.3.6.1.4.1.39003.3.2.20.1Scalarsub10UnitMgmtTransactionread-writecurrentThis is used to commit or rollback the setting of object configuration. It only applies where the objects are subject to transactional requirements. For exampl…
1.3.6.1.4.1.39003.3.2.20.2Scalarsub10UnitMgmtTransactionStatusread-writecurrentThis indicates either a transaction is currently in progress or if the last transaction was committed successfully or was rolled back.
1.3.6.1.4.1.39003.3.2.20.3Scalarsub10UnitMgmtRollbackTimeoutread-writecurrentThe timeout in seconds after which uncommitted Sets will be rolled back to their previous values. A rollback only affects those objects which are subject to tr…
1.3.6.1.4.1.39003.3.2.20.4Scalarsub10UnitMgmtTransactionModeread-writecurrentEnables and Disables transactions. If sub10UnitMgmTransactionMode is stateDisabled(0) then no objects are subject to commit and rollback.
1.3.6.1.4.1.39003.3.2.20.5Scalarsub10UnitMgmtResetActionread-writecurrentThis is used to reset unit configuration and stats. resetFactoryDefaults(2) - Resets all configuration to Factory Defaults, requires a reboot. resetStatistics(…
1.3.6.1.4.1.39003.3.2.20.6Scalarsub10UnitMgmtResetStatsGroupread-writecurrentThis is used to reset specific statistics when set prior to submitting sub10UnitMgmtResetAction = resetStatistics(4). For reset of all stats sub10UnitMgmtReset…
1.3.6.1.4.1.39003.3.2.20.7Scalarsub10UnitMgmtResetAlarmsTyperead-writecurrentThis is used to reset specific alarm configuration when set prior to submitting sub10UnitMgmtResetAction = resetAlarmConfig(5). For reset of all alarms sub10Un…
1.3.6.1.4.1.39003.4Nodesub10Ethernet
1.3.6.1.4.1.39003.4.1Nodesub10EthernetStatus
1.3.6.1.4.1.39003.4.1.1Nodesub10EthernetLocalStatus
1.3.6.1.4.1.39003.4.1.1.1Scalarsub10EthLclLinkStatusread-onlycurrentThe status of the ethernet link. Synonymous with interfaces OperState
1.3.6.1.4.1.39003.4.1.1.2Scalarsub10EthLclMacAddressread-onlycurrentThe MAC address of the local ethernet interface. Synonymous with interfaces ifPhysAddress
1.3.6.1.4.1.39003.4.1.1.3Scalarsub10EthLclSpeedread-onlycurrentThe estimated speed of the local ethernet interface in bits per second. Synonymous with interfaces ifSpeed
1.3.6.1.4.1.39003.4.1.1.4Scalarsub10EthLclDuplexread-onlycurrentThe duplex operation of the local ethernet interface
1.3.6.1.4.1.39003.4.1.1.5Scalarsub10EthLclMDIread-onlycurrentThe MDI/MDIX state of the local ethernet interface
1.3.6.1.4.1.39003.4.1.2Nodesub10EthernetRemoteStatus
1.3.6.1.4.1.39003.4.1.2.1Scalarsub10EthRmtLinkStatusread-onlycurrentThe status of the remote ethernet interface. Synonymous but not identical with interfaces OperState on the remote unit
1.3.6.1.4.1.39003.4.1.2.2Scalarsub10EthRmtMacAddressread-onlycurrentThe MAC address of the remote ethernet interface. Synonymous with interfaces ifPhysAddress on the remote unit.
1.3.6.1.4.1.39003.4.1.2.3Scalarsub10EthRmtSpeedread-onlycurrentThe estimated speed of the remote ethernet interface in bits per second. Synonymous with interfaces ifSpeed on the remote unit
1.3.6.1.4.1.39003.4.1.2.4Scalarsub10EthRmtDuplexread-onlycurrentThe duplex operation of the remote ethernet interface
1.3.6.1.4.1.39003.4.1.2.5Scalarsub10EthRmtMDIread-onlycurrentThe MDI/MDIX state of the remote ethernet interface
1.3.6.1.4.1.39003.4.2Nodesub10EthernetMgmt
1.3.6.1.4.1.39003.4.2.1Nodesub10EthMgmtPhy
1.3.6.1.4.1.39003.4.2.1.1Scalarsub10EthMgmtPhyAutoNegread-writecurrentAuto-negotiation of ethernet interface parameters.
1.3.6.1.4.1.39003.4.2.1.2Scalarsub10EthMgmtPhySpeedread-writecurrentSpeed of the ethernet interface in bits per second used only when sub10UnitMgmtPhyAutoNeg=disabled.
1.3.6.1.4.1.39003.4.2.1.3Scalarsub10EthMgmtPhyDuplexread-writecurrentThe duplex operation of the ethernet interface used only when sub10UnitMgmtPhyAutoNeg=disabled.
1.3.6.1.4.1.39003.4.2.1.4Scalarsub10EthMgmtPhyMDIread-writecurrentThe duplex operation of the ethernet interface used only when sub10UnitMgmtPhyAutoNeg=disabled.
1.3.6.1.4.1.39003.4.2.2Nodesub10EthMgmtVlan
1.3.6.1.4.1.39003.4.2.2.1Scalarsub10EthMgmtVlanFilteringread-writecurrentVLAN filtering on the ethernet interface. This applies to user traffic only not management traffic however to enable VLAN filtering a Unit Management VLAN conf…
1.3.6.1.4.1.39003.4.2.2.2Scalarsub10EthMgmtVlanDefaultEnabledread-writecurrentEnable Default VLAN tagging and untagging on the ethernet interface. Only valid when sub10EthMgmtVlanFiltering is enabled. Default VAN tagging allows manipulat…
1.3.6.1.4.1.39003.4.2.2.3Scalarsub10EthMgmtVlanDefaultIdread-writecurrentThe default vlan id which is tagged to all incoming untagged user traffic ingressing the ethernet interface. The default VLAN is also untagged from all user tr…
1.3.6.1.4.1.39003.4.2.2.4Scalarsub10EthMgmtVlanDefaultPriorityread-writecurrentThe default vlan priority used when tagging the default VLAN to all incoming untagged user traffic ingressing the ethernet interface. Only valid when sub10EthM…
1.3.6.1.4.1.39003.4.2.2.5Scalarsub10EthMgmtVlanDefaultDEIread-writecurrentThe default vlan drop eligible indicator used when tagging the default VLAN to all incoming untagged user traffic ingressing the ethernet interface. Only valid…
1.3.6.1.4.1.39003.4.2.2.6Scalarsub10EthMgmtVlanIngressActionread-onlycurrentThe manipulation action used for all ethernet frames being received (ingress) in from the ethernet interface. Only if the default VLAN is set sub10EthMgmtVlanD…
1.3.6.1.4.1.39003.4.2.2.7Scalarsub10EthMgmtVlanEgressActionread-onlycurrentThe manipulation action used for all ethernet frames being transmitted (egress) out of the ethernet interface. Only if the default VLAN is set sub10EthMgmtVlan…
1.3.6.1.4.1.39003.4.2.2.8Tablesub10EthMgmtVlanAllowedTablenot-accessiblecurrentThis tables defines the VLANs that are allowed to pass through the ethernet interface. The table is only used when the value of sub10EthMgmtVlanFiltering is en…
1.3.6.1.4.1.39003.4.2.2.8.1Rowsub10EthMgmtVlanAllowedEntrynot-accessiblecurrentAn entry (row) in the sub10UnitMgmtVlanTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned.
1.3.6.1.4.1.39003.4.2.2.8.1.1Columnsub10EthMgmtVlanAllowedIndexnot-accessiblecurrentThe sub10EthMgmtVlanTable index.
1.3.6.1.4.1.39003.4.2.2.8.1.2Columnsub10EthMgmtVlanAllowedRowStatusread-createcurrentThe row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or n…
1.3.6.1.4.1.39003.4.2.2.8.1.3Columnsub10EthMgmtVlanAllowedIdread-writecurrentThe vlan id which is allowed to pass through the ethernet interface. Duplicate vlan ids in multiple entries of the table with RowStatus 'active(1) are not allo…
1.3.6.1.4.1.39003.4.2.3Nodesub10EthMgmtQoS
1.3.6.1.4.1.39003.4.2.3.1Scalarsub10EthMgmtQoSActiveStateread-writecurrentThis defines if QoS is enabled or disabled.
1.3.6.1.4.1.39003.4.2.3.2Scalarsub10EthMgmtQoSModeread-writecurrentDefines the mode of QoS action to be applied to the QoS queues. qosEthernet: - Traffic is mapped to QoS queues - based on Ethernet protocol - VLANId and/or PCP…
1.3.6.1.4.1.39003.4.2.3.3Scalarsub10EthMgmtQoSUntaggedQueueread-writecurrentThis defines the QoS queue where all untagged ethernet frames are placed. Only valid when sub10EthMgmtQoSQType = 'qosEthernet' For tagged frames see sub10EthMg…
1.3.6.1.4.1.39003.4.2.3.4Tablesub10EthMgmtQoSQTablenot-accessiblecurrentThis table configures the characteristics of a Quality of Service queue. There are a fixed number of 8 queues in total and therefore 8 entries in this table in…
1.3.6.1.4.1.39003.4.2.3.4.1Rowsub10EthMgmtQoSQEntrynot-accessiblecurrentAn entry (row) in the sub10EthMgmtQoSQTable.
1.3.6.1.4.1.39003.4.2.3.4.1.1Columnsub10EthMgmtQoSQIndexnot-accessiblecurrentThe queue number used as an index, fixed to 8 standard queues.
1.3.6.1.4.1.39003.4.2.3.4.1.2Columnsub10EthMgmtQoSQSchedulingTyperead-writecurrentThe scheduling discipline applied to the queue. qosSPQ - Strict Priority Queueing Queues are serviced in strict priority order. Packets on the queue are servic…
1.3.6.1.4.1.39003.4.2.3.4.1.3Columnsub10EthMgmtQoSQDWRRWeightread-writecurrentA percentage weighting factor used to calculate the quantum value used to calculate the starting transmission credit at each visit of the queue scheduler. Only…
1.3.6.1.4.1.39003.4.2.3.4.1.4Columnsub10EthMgmtQoSQCongestionPolicyread-writecurrentThe policy used when a queue is congested.
1.3.6.1.4.1.39003.4.2.3.4.1.5Columnsub10EthMgmtQoSQSizeMaxread-onlycurrentThe maximum size of the queue expressed in packets.
1.3.6.1.4.1.39003.4.2.3.4.1.6Columnsub10EthMgmtQoSQLenread-onlycurrentThe current length of the queue expressed in packets.
1.3.6.1.4.1.39003.4.2.3.5Scalarsub10EthMgmtQoSVlanMappingNumberread-onlycurrentThe number of sub10EthMgmtQoSVlanMappingTable table entries present on this system.
1.3.6.1.4.1.39003.4.2.3.6Tablesub10EthMgmtQoSVlanTablenot-accessiblecurrentThis table configures the Quality of Service Vlan to queue mapping. Multiple Vlans may be mapped to any queue. On egress of the ethernet interface all pkts tag…
1.3.6.1.4.1.39003.4.2.3.6.1Rowsub10EthMgmtQoSVlanEntrynot-accessiblecurrentAn entry (row) in the sub10EthMgmtQoSVlanMappingTable.
1.3.6.1.4.1.39003.4.2.3.6.1.1Columnsub10EthMgmtQoSVlanIndexnot-accessiblecurrentThe sub10EthMgmtQoSVlanMappingTable index.
1.3.6.1.4.1.39003.4.2.3.6.1.2Columnsub10EthMgmtQoSVlanIdread-writecurrentThe vlan id used as an index to the table and which is egressing through the ethernet interface and which should be placed on the queue specified by sub10EthMg…
1.3.6.1.4.1.39003.4.2.3.6.1.3Columnsub10EthMgmtQoSVlanQueueread-writecurrentThe queue number which identifies the specific queue where the packets that are tagged with the Vlan Id specified in sub10EthMgmtQoSVlanId are inserted.
1.3.6.1.4.1.39003.4.2.3.8Tablesub10EthMgmtQoSPCPTablenot-accessiblecurrentThis table configures the Quality of Service Priority Code Point (PCP) or Pbits to queue mapping. Multiple PCPs may be mapped to the same queue but the same PC…
1.3.6.1.4.1.39003.4.2.3.8.1Rowsub10EthMgmtQoSPCPEntrynot-accessiblecurrentAn entry (row) in the sub10EthMgmtQoSPCPMappingTable.
1.3.6.1.4.1.39003.4.2.3.8.1.1Columnsub10EthMgmtQoSPCPIndexnot-accessiblecurrentThe sub10EthMgmtQoSPCPTable index. This represents the PCP bits priority value. sub10EthMgmtQoSPCPIndex(1)=PCPBit(0) sub10EthMgmtQoSPCPIndex(2)=PCPBit(1) sub10…
1.3.6.1.4.1.39003.4.2.3.8.1.2Columnsub10EthMgmtQoSPCPQueueread-writecurrentThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific PCP bit sub10EthMgmtQoSPCPIndex ar…
1.3.6.1.4.1.39003.4.2.3.9Scalarsub10EthMgmtQoSDSCPMappingNumberread-onlycurrentThe number of sub10EthMgmtQoSDSCPMappingTable table entries present on this system.
1.3.6.1.4.1.39003.4.2.3.10Tablesub10EthMgmtQoSDSCPTablenot-accessiblecurrentThis table configures the Quality of Service Differentiated Services Code Point (DSCP) to queue mapping. Multiple DSCPs may be mapped to the same queue but the…
1.3.6.1.4.1.39003.4.2.3.10.1Rowsub10EthMgmtQoSDSCPEntrynot-accessiblecurrentAn entry (row) in the sub10EthMgmtQoSDSCPMappingTable.
1.3.6.1.4.1.39003.4.2.3.10.1.1Columnsub10EthMgmtQoSDSCPIndexnot-accessiblecurrentThe sub10EthMgmtQoSDSCPTable index.
1.3.6.1.4.1.39003.4.2.3.10.1.2Columnsub10EthMgmtQoSDSCPMarkingread-writecurrentThe DSCP value used as an index to the table. This defines the DSCP value which when egressing through the ethernet interface is placed on the queue specified …
1.3.6.1.4.1.39003.4.2.3.10.1.3Columnsub10EthMgmtQoSDSCPQueueread-writecurrentThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific DSCP marking sub10EthMgmtQoSDSCP a…
1.3.6.1.4.1.39003.4.2.3.11Scalarsub10EthMgmtQoSMPLSMappingNumberread-onlycurrentThe number of sub10EthMgmtQoSMPLSMappingTable table entries present on this system.This is equivelent to the number of MPLS Traffic classes
1.3.6.1.4.1.39003.4.2.3.12Tablesub10EthMgmtQoSMPLSTablenot-accessiblecurrentThis table configures the Quality of Service Multi-Protocol Label Switching protocol (MPLS) Traffic Class (TC) to queue mapping. Multiple MPLS TCs may be mappe…
1.3.6.1.4.1.39003.4.2.3.12.1Rowsub10EthMgmtQoSMPLSEntrynot-accessiblecurrentAn entry (row) in the sub10EthMgmtQoSMPLSMappingTable.
1.3.6.1.4.1.39003.4.2.3.12.1.1Columnsub10EthMgmtQoSMPLSIndexnot-accessiblecurrentThe sub10EthMgmtQoSMPLSMappingTable index.
1.3.6.1.4.1.39003.4.2.3.12.1.2Columnsub10EthMgmtQoSMPLSTrafficClassread-writecurrentThe MPLS Traffic Class value used as an index to the table. This defines the MPLS TC value which when egressing through the ethernet interface is placed on the…
1.3.6.1.4.1.39003.4.2.3.12.1.3Columnsub10EthMgmtQoSMPLSQueueread-writecurrentThe queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific MPLS Traffic Class sub10EthMgmtQoS…
1.3.6.1.4.1.39003.4.2.4Nodesub10EthMgmtStats
1.3.6.1.4.1.39003.4.2.4.1Tablesub10EthMgmtStatsActiveTablenot-accessiblecurrentThis table maintains an entry for each Ethernet statistic that is enabled and active.
1.3.6.1.4.1.39003.4.2.4.1.1Rowsub10EthMgmtStatsActiveEntrynot-accessiblecurrentAn entry in the sub10EthMgmtStatsActiveTable. Each entry represents an object instance of ethernet stats and it's current state.
1.3.6.1.4.1.39003.4.2.4.1.1.1Columnsub10EthMgmtStatsActiveIndexnot-accessiblecurrentThe number of ethernet stats objects used as an index to this table.
1.3.6.1.4.1.39003.4.2.4.1.1.2Columnsub10EthMgmtStatsActiveNameread-onlycurrentThe stats object name. This is the name of the ethernet stats object in the sub10EthernetStatsCurrent group.
1.3.6.1.4.1.39003.4.2.4.1.1.3Columnsub10EthMgmtStatsActiveStateread-writecurrentIf set to 'enabled' the statistic is active.
1.3.6.1.4.1.39003.4.3Nodesub10EthernetStats
1.3.6.1.4.1.39003.4.3.1Scalarsub10EthStatsTimeElapsedread-onlycurrentThe time that has elapsed from the beginning of the statistical measurement period. This is normally time from just after the last reboot time when the statist…
1.3.6.1.4.1.39003.4.3.2Nodesub10EthernetStatsCurrent
1.3.6.1.4.1.39003.4.3.2.1Scalarsub10EthStatsCurrRxOctetsread-onlycurrentThe number of octets received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documen…
1.3.6.1.4.1.39003.4.3.2.2Scalarsub10EthStatsCurrRxGoodFrmsread-onlycurrentThe number of good frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical do…
1.3.6.1.4.1.39003.4.3.2.3Scalarsub10EthStatsCurrRxBcastFrmsread-onlycurrentThe number of broadcast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.2.4Scalarsub10EthStatsCurrRxMcastFrmsread-onlycurrentThe number of multicast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.2.5Scalarsub10EthStatsCurrRxPauseFrmsread-onlycurrentThe number of Pause frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical d…
1.3.6.1.4.1.39003.4.3.2.6Scalarsub10EthStatsCurrRxCRCErrsread-onlycurrentThe number of CRC errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical doc…
1.3.6.1.4.1.39003.4.3.2.7Scalarsub10EthStatsCurrRxAlignErrsread-onlycurrentThe number of Alignment coding errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online…
1.3.6.1.4.1.39003.4.3.2.8Scalarsub10EthStatsCurrRxOversizedread-onlycurrentThe number of Oversized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.2.9Scalarsub10EthStatsCurrRxJabberFrmsread-onlycurrentThe number of Jabber frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical …
1.3.6.1.4.1.39003.4.3.2.10Scalarsub10EthStatsCurrRxUndersizedread-onlycurrentThe number of Undersized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techi…
1.3.6.1.4.1.39003.4.3.2.11Scalarsub10EthStatsCurrRxFragmentsread-onlycurrentThe number of frame fragments received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techica…
1.3.6.1.4.1.39003.4.3.2.12Scalarsub10EthStatsCurrRxSOFOvrnsread-onlycurrentThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations since the last po…
1.3.6.1.4.1.39003.4.3.2.13Scalarsub10EthStatsCurrTxOctetsread-onlycurrentThe number of octets transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical docu…
1.3.6.1.4.1.39003.4.3.2.14Scalarsub10EthStatsCurrTxGoodFrmsread-onlycurrentThe number of ethernet frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tech…
1.3.6.1.4.1.39003.4.3.2.15Scalarsub10EthStatsCurrTxBcastFrmsread-onlycurrentThe number of broadcast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.2.16Scalarsub10EthStatsCurrTxMcastFrmsread-onlycurrentThe number of multicast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.2.17Scalarsub10EthStatsCurrTxPauseFrmsread-onlycurrentThe number of Pause frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techica…
1.3.6.1.4.1.39003.4.3.2.18Scalarsub10EthStatsCurrTxDeferredread-onlycurrentThe number of Deferred frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tech…
1.3.6.1.4.1.39003.4.3.2.19Scalarsub10EthStatsCurrTxCollsnread-onlycurrentThe number of Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.2.20Scalarsub10EthStatsCurrTxSnglCollsnread-onlycurrentThe number of Single Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to onl…
1.3.6.1.4.1.39003.4.3.2.21Scalarsub10EthStatsCurrTxMlplCollsnread-onlycurrentThe number of Multiple Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to o…
1.3.6.1.4.1.39003.4.3.2.22Scalarsub10EthStatsCurrTxExsvCollsnread-onlycurrentThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more inf…
1.3.6.1.4.1.39003.4.3.2.23Scalarsub10EthStatsCurrTxLtCollsnread-onlycurrentThe number of Late Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more informat…
1.3.6.1.4.1.39003.4.3.2.24Scalarsub10EthStatsCurrTxCSenseErrsread-onlycurrentThe number of Carrier Sense Errored frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer t…
1.3.6.1.4.1.39003.4.3.2.25Scalarsub10EthStatsCurrPkts64Octetsread-onlycurrentThe total number of 64-byte frames received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refe…
1.3.6.1.4.1.39003.4.3.2.26Scalarsub10EthStatsCurrPkts65T127read-onlycurrentThe total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more …
1.3.6.1.4.1.39003.4.3.2.27Scalarsub10EthStatsCurrPkts128T255read-onlycurrentThe total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more…
1.3.6.1.4.1.39003.4.3.2.28Scalarsub10EthStatsCurrPkts256T511read-onlycurrentThe total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more…
1.3.6.1.4.1.39003.4.3.2.29Scalarsub10EthStatsCurrPkts512T1023read-onlycurrentThe total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For mor…
1.3.6.1.4.1.39003.4.3.2.30Scalarsub10EthStatsCurrPkts1024TMaxread-onlycurrentThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface since the last power cycle / reset of …
1.3.6.1.4.1.39003.4.3.2.31Scalarsub10EthStatsCurrRxMbpsread-onlycurrentThe Rx throughput in Mbps in this second.
1.3.6.1.4.1.39003.4.3.2.32Scalarsub10EthStatsCurrTxMbpsread-onlycurrentThe Tx throughput in Mbps in this second.
1.3.6.1.4.1.39003.4.3.2.33Scalarsub10EthStatsCurrRxMbpsMinread-onlycurrentThe minimum Rx throughput in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.2.34Scalarsub10EthStatsCurrRxMbpsMaxread-onlycurrentThe maximum Rx throughput in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.2.35Scalarsub10EthStatsCurrRxMbpsAvgread-onlycurrentThe average Rx throughput in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.2.36Scalarsub10EthStatsCurrTxMbpsMinread-onlycurrentThe minimum Tx throughput in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.2.37Scalarsub10EthStatsCurrTxMbpsMaxread-onlycurrentThe maximum Tx throughput in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.2.38Scalarsub10EthStatsCurrTxMbpsAvgread-onlycurrentThe average Tx throughput in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.2.39Scalarsub10EthStatsCurrRmtRxMbpsAvgread-onlycurrentThe average Rx throughput of the remote unit in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.2.40Scalarsub10EthStatsCurrRmtTxMbpsAvgread-onlycurrentThe average Tx throughput of the remote unit in Mbps in the last rolling minute.
1.3.6.1.4.1.39003.4.3.3Nodesub10EthernetStatsHistory
1.3.6.1.4.1.39003.4.3.3.1Nodesub10EthernetStats15mHistory
1.3.6.1.4.1.39003.4.3.3.1.1Scalarsub10EthStats15mHistIntvlsread-onlycurrentThe number of valid table entries in sub10EthStats15mHistTable on this system. There is one entry per 15 minute interval. If the unit has been running for a mi…
1.3.6.1.4.1.39003.4.3.3.1.2Tablesub10EthStats15mHistTablenot-accessiblecurrentThis table maintains a history of Ethernet statistics based on 15 minute intervals. There are a maximum of 96 intervals which represent 24 hours of data. This …
1.3.6.1.4.1.39003.4.3.3.1.2.1Rowsub10EthStats15mHistEntrynot-accessiblecurrentAn entry in the sub10EthStats15mHistTable. Each entry represents 15 minute of performance management data where the first entry with index=1 is the most recent…
1.3.6.1.4.1.39003.4.3.3.1.2.1.1Columnsub10EthStats15mHistIntvlnot-accessiblecurrentThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least …
1.3.6.1.4.1.39003.4.3.3.1.2.1.2Columnsub10EthStats15mHistTimeread-writecurrentThe local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same s…
1.3.6.1.4.1.39003.4.3.3.1.2.1.3Columnsub10EthStats15mHistRxOctetsread-onlycurrentThe number of octets received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documen…
1.3.6.1.4.1.39003.4.3.3.1.2.1.4Columnsub10EthStats15mHistRxGoodFrmsread-onlycurrentThe number of good frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical do…
1.3.6.1.4.1.39003.4.3.3.1.2.1.5Columnsub10EthStats15mHistRxBcastFrmsread-onlycurrentThe number of broadcast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.3.1.2.1.6Columnsub10EthStats15mHistRxMcastFrmsread-onlycurrentThe number of multicast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.3.1.2.1.7Columnsub10EthStats15mHistRxPauseFrmsread-onlycurrentThe number of Pause frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical d…
1.3.6.1.4.1.39003.4.3.3.1.2.1.8Columnsub10EthStats15mHistRxCRCErrsread-onlycurrentThe number of CRC errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical doc…
1.3.6.1.4.1.39003.4.3.3.1.2.1.9Columnsub10EthStats15mHistRxAlignErrsread-onlycurrentThe number of Alignment coding errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online…
1.3.6.1.4.1.39003.4.3.3.1.2.1.10Columnsub10EthStats15mHistRxOversizedread-onlycurrentThe number of Oversized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.3.1.2.1.11Columnsub10EthStats15mHistRxJabberFrmsread-onlycurrentThe number of Jabber frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical …
1.3.6.1.4.1.39003.4.3.3.1.2.1.12Columnsub10EthStats15mHistRxUndersizedread-onlycurrentThe number of Undersized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techi…
1.3.6.1.4.1.39003.4.3.3.1.2.1.13Columnsub10EthStats15mHistRxFragmentsread-onlycurrentThe number of frame fragments received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techica…
1.3.6.1.4.1.39003.4.3.3.1.2.1.14Columnsub10EthStats15mHistRxSOFOvrnsread-onlycurrentThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations since the last po…
1.3.6.1.4.1.39003.4.3.3.1.2.1.15Columnsub10EthStats15mHistTxOctetsread-onlycurrentThe number of octets transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical docu…
1.3.6.1.4.1.39003.4.3.3.1.2.1.16Columnsub10EthStats15mHistTxGoodFrmsread-onlycurrentThe number of ethernet frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tech…
1.3.6.1.4.1.39003.4.3.3.1.2.1.17Columnsub10EthStats15mHistTxBcastFrmsread-onlycurrentThe number of broadcast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.3.1.2.1.18Columnsub10EthStats15mHistTxMcastFrmsread-onlycurrentThe number of multicast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.3.1.2.1.19Columnsub10EthStats15mHistTxPauseFrmsread-onlycurrentThe number of Pause frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techica…
1.3.6.1.4.1.39003.4.3.3.1.2.1.20Columnsub10EthStats15mHistTxDeferredread-onlycurrentThe number of Deferred frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tech…
1.3.6.1.4.1.39003.4.3.3.1.2.1.21Columnsub10EthStats15mHistTxCollsnread-onlycurrentThe number of Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.3.1.2.1.22Columnsub10EthStats15mHistTxSnglCollsnread-onlycurrentThe number of Single Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to onl…
1.3.6.1.4.1.39003.4.3.3.1.2.1.23Columnsub10EthStats15mHistTxMlplCollsnread-onlycurrentThe number of Multiple Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to o…
1.3.6.1.4.1.39003.4.3.3.1.2.1.24Columnsub10EthStats15mHistTxExsvCollsnread-onlycurrentThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more inf…
1.3.6.1.4.1.39003.4.3.3.1.2.1.25Columnsub10EthStats15mHistTxLtCollsnread-onlycurrentThe number of Late Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more informat…
1.3.6.1.4.1.39003.4.3.3.1.2.1.26Columnsub10EthStats15mHistTxCSenseErrsread-onlycurrentThe number of Carrier Sense Errored frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer t…
1.3.6.1.4.1.39003.4.3.3.1.2.1.27Columnsub10EthStats15mHistPkts64Octetsread-onlycurrentThe total number of 64-byte frames received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refe…
1.3.6.1.4.1.39003.4.3.3.1.2.1.28Columnsub10EthStats15mHistPkts65T127read-onlycurrentThe total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more …
1.3.6.1.4.1.39003.4.3.3.1.2.1.29Columnsub10EthStats15mHistPkts128T255read-onlycurrentThe total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more…
1.3.6.1.4.1.39003.4.3.3.1.2.1.30Columnsub10EthStats15mHistPkts256T511read-onlycurrentThe total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more…
1.3.6.1.4.1.39003.4.3.3.1.2.1.31Columnsub10EthStats15mHistPkts512T1023read-onlycurrentThe total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For mor…
1.3.6.1.4.1.39003.4.3.3.1.2.1.32Columnsub10EthStats15mHistPkts1024TMaxread-onlycurrentThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface since the last power cycle / reset of …
1.3.6.1.4.1.39003.4.3.3.1.2.1.33Columnsub10EthStats15mHistRxMbpsMinread-onlycurrentThe minimum Rx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.1.2.1.34Columnsub10EthStats15mHistRxMbpsMaxread-onlycurrentThe maximum Rx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.1.2.1.35Columnsub10EthStats15mHistRxMbpsAvgread-onlycurrentThe average Rx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.1.2.1.36Columnsub10EthStats15mHistTxMbpsMinread-onlycurrentThe minimum Tx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.1.2.1.37Columnsub10EthStats15mHistTxMbpsMaxread-onlycurrentThe maximum Tx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.1.2.1.38Columnsub10EthStats15mHistTxMbpsAvgread-onlycurrentThe average Tx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.2Nodesub10EthStats1dHistory
1.3.6.1.4.1.39003.4.3.3.2.1Scalarsub10EthStats1dHistIntvlsread-onlycurrentThe number of valid table entries in sub10EthStats1dHistTable on this system. There is one entry per 1 day interval. If the unit has been running for a minimum…
1.3.6.1.4.1.39003.4.3.3.2.2Tablesub10EthStats1dHistTablenot-accessiblecurrentThis table maintains a history of Radio statistics based on 1 day intervals. There are a maximum of 30 intervals which represent 30 days of data. This table al…
1.3.6.1.4.1.39003.4.3.3.2.2.1Rowsub10EthStats1dHistEntrynot-accessiblecurrentAn entry in the sub10EthStats1dHistTable. Each entry represents 1 day of performance management data where the first entry with index=1 is the most recent 1 da…
1.3.6.1.4.1.39003.4.3.3.2.2.1.1Columnsub10EthStats1dHistIntvlnot-accessiblecurrentThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least …
1.3.6.1.4.1.39003.4.3.3.2.2.1.2Columnsub10EthStats1dHistTimeread-writecurrentThe local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10E…
1.3.6.1.4.1.39003.4.3.3.2.2.1.3Columnsub10EthStats1dHistRxOctetsread-onlycurrentThe number of octets received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documen…
1.3.6.1.4.1.39003.4.3.3.2.2.1.4Columnsub10EthStats1dHistRxGoodFrmsread-onlycurrentThe number of good frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical do…
1.3.6.1.4.1.39003.4.3.3.2.2.1.5Columnsub10EthStats1dHistRxBcastFrmsread-onlycurrentThe number of broadcast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.3.2.2.1.6Columnsub10EthStats1dHistRxMcastFrmsread-onlycurrentThe number of multicast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.3.2.2.1.7Columnsub10EthStats1dHistRxPauseFrmsread-onlycurrentThe number of Pause frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical d…
1.3.6.1.4.1.39003.4.3.3.2.2.1.8Columnsub10EthStats1dHistRxCRCErrsread-onlycurrentThe number of CRC errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical doc…
1.3.6.1.4.1.39003.4.3.3.2.2.1.9Columnsub10EthStats1dHistRxAlignErrsread-onlycurrentThe number of Alignment coding errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online…
1.3.6.1.4.1.39003.4.3.3.2.2.1.10Columnsub10EthStats1dHistRxOversizedread-onlycurrentThe number of Oversized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techic…
1.3.6.1.4.1.39003.4.3.3.2.2.1.11Columnsub10EthStats1dHistRxJabberFrmsread-onlycurrentThe number of Jabber frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical …
1.3.6.1.4.1.39003.4.3.3.2.2.1.12Columnsub10EthStats1dHistRxUndersizedread-onlycurrentThe number of Undersized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techi…
1.3.6.1.4.1.39003.4.3.3.2.2.1.13Columnsub10EthStats1dHistRxFragmentsread-onlycurrentThe number of frame fragments received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techica…
1.3.6.1.4.1.39003.4.3.3.2.2.1.14Columnsub10EthStats1dHistRxSOFOvrnsread-onlycurrentThe number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations since the last po…
1.3.6.1.4.1.39003.4.3.3.2.2.1.15Columnsub10EthStats1dHistTxOctetsread-onlycurrentThe number of octets transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical docu…
1.3.6.1.4.1.39003.4.3.3.2.2.1.16Columnsub10EthStats1dHistTxGoodFrmsread-onlycurrentThe number of ethernet frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tech…
1.3.6.1.4.1.39003.4.3.3.2.2.1.17Columnsub10EthStats1dHistTxBcastFrmsread-onlycurrentThe number of broadcast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.3.2.2.1.18Columnsub10EthStats1dHistTxMcastFrmsread-onlycurrentThe number of multicast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.3.2.2.1.19Columnsub10EthStats1dHistTxPauseFrmsread-onlycurrentThe number of Pause frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techica…
1.3.6.1.4.1.39003.4.3.3.2.2.1.20Columnsub10EthStats1dHistTxDeferredread-onlycurrentThe number of Deferred frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tech…
1.3.6.1.4.1.39003.4.3.3.2.2.1.21Columnsub10EthStats1dHistTxCollsnread-onlycurrentThe number of Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online tec…
1.3.6.1.4.1.39003.4.3.3.2.2.1.22Columnsub10EthStats1dHistTxSnglCollsnread-onlycurrentThe number of Single Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to onl…
1.3.6.1.4.1.39003.4.3.3.2.2.1.23Columnsub10EthStats1dHistTxMlplCollsnread-onlycurrentThe number of Multiple Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to o…
1.3.6.1.4.1.39003.4.3.3.2.2.1.24Columnsub10EthStats1dHistTxExsvCollsnread-onlycurrentThe number of Excessive Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more inf…
1.3.6.1.4.1.39003.4.3.3.2.2.1.25Columnsub10EthStats1dHistTxLtCollsnread-onlycurrentThe number of Late Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more informat…
1.3.6.1.4.1.39003.4.3.3.2.2.1.26Columnsub10EthStats1dHistTxCSenseErrsread-onlycurrentThe number of Carrier Sense Errored frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer t…
1.3.6.1.4.1.39003.4.3.3.2.2.1.27Columnsub10EthStats1dHistPkts64Octetsread-onlycurrentThe total number of 64-byte frames received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refe…
1.3.6.1.4.1.39003.4.3.3.2.2.1.28Columnsub10EthStats1dHistPkts65T127read-onlycurrentThe total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more …
1.3.6.1.4.1.39003.4.3.3.2.2.1.29Columnsub10EthStats1dHistPkts128T255read-onlycurrentThe total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more…
1.3.6.1.4.1.39003.4.3.3.2.2.1.30Columnsub10EthStats1dHistPkts256T511read-onlycurrentThe total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more…
1.3.6.1.4.1.39003.4.3.3.2.2.1.31Columnsub10EthStats1dHistPkts512T1023read-onlycurrentThe total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For mor…
1.3.6.1.4.1.39003.4.3.3.2.2.1.32Columnsub10EthStats1dHistPkts1024TMaxread-onlycurrentThe total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface since the last power cycle / reset of …
1.3.6.1.4.1.39003.4.3.3.2.2.1.33Columnsub10EthStats1dHistRxMbpsMinread-onlycurrentThe minimum Rx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.2.2.1.34Columnsub10EthStats1dHistRxMbpsMaxread-onlycurrentThe maximum Rx throughput in Mbps in this 15 minute interval.
1.3.6.1.4.1.39003.4.3.3.2.2.1.35Columnsub10EthStats1dHistRxMbpsAvgread-onlycurrentThe average Rx throughput in Mbps in this 1 day interval.
1.3.6.1.4.1.39003.4.3.3.2.2.1.36Columnsub10EthStats1dHistTxMbpsMinread-onlycurrentThe minimum Tx throughput in Mbps in this 1 day interval.
1.3.6.1.4.1.39003.4.3.3.2.2.1.37Columnsub10EthStats1dHistTxMbpsMaxread-onlycurrentThe maximum Tx throughput in Mbps in this 1 day interval.
1.3.6.1.4.1.39003.4.3.3.2.2.1.38Columnsub10EthStats1dHistTxMbpsAvgread-onlycurrentThe average Tx throughput in Mbps in this 1 day interval.
1.3.6.1.4.1.39003.5Nodesub10Radio
1.3.6.1.4.1.39003.5.1Nodesub10RadioStatus
1.3.6.1.4.1.39003.5.1.1Nodesub10RadioLocalStatus
1.3.6.1.4.1.39003.5.1.1.1Scalarsub10RadioLclLinkStatusread-onlycurrentThe status of the local radio link.
1.3.6.1.4.1.39003.5.1.1.2Scalarsub10RadioLclTxPowerread-onlycurrentThe current transmit power of the local radio link, measured in dBm.
1.3.6.1.4.1.39003.5.1.1.3Scalarsub10RadioLclRxPowerread-onlycurrentThe current receive power of the local radio link, measured in dBm.
1.3.6.1.4.1.39003.5.1.1.4Scalarsub10RadioLclVectErrread-onlycurrentThe current vector error of the local radio link, measured in dB.
1.3.6.1.4.1.39003.5.1.1.5Scalarsub10RadioLclLnkLossread-onlycurrentThe current link loss of the local radio link, measured in dB.
1.3.6.1.4.1.39003.5.1.1.6Scalarsub10RadioLclAlignmentModeread-onlycurrentAlignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode is managed using sub10R…
1.3.6.1.4.1.39003.5.1.1.7Scalarsub10RadioLclDataRateread-onlycurrentThe maximum data rate of the Airside interface.
1.3.6.1.4.1.39003.5.1.1.8Scalarsub10RadioLclMWUTyperead-onlycurrentThe local MWU type
1.3.6.1.4.1.39003.5.1.1.9Scalarsub10RadioLclAFERread-onlycurrentThe Air Frame Error Ratio in the last second. This is the % of lost air frames based on the UFEC count in the previous second divided by the expected Air Frame…
1.3.6.1.4.1.39003.5.1.1.10Scalarsub10RadioLclRxModulationModeread-onlycurrentThe current Receive Modulation Mode on the local unit.
1.3.6.1.4.1.39003.5.1.1.11Scalarsub10RadioLclTxModulationModeread-onlycurrentThe current Transmit Modulation Mode on the local unit.
1.3.6.1.4.1.39003.5.1.2Nodesub10RadioRemoteStatus
1.3.6.1.4.1.39003.5.1.2.1Scalarsub10RadioRmtLinkStatusread-onlycurrentThe status of the remote radio link.
1.3.6.1.4.1.39003.5.1.2.2Scalarsub10RadioRmtTxPowerread-onlycurrentThe current transmit power of the remote radio link, measured in dBm.
1.3.6.1.4.1.39003.5.1.2.3Scalarsub10RadioRmtRxPowerread-onlycurrentThe current receive power of the remote radio link, measured in dBm.
1.3.6.1.4.1.39003.5.1.2.4Scalarsub10RadioRmtVectErrread-onlycurrentThe current vector error of the remote radio link, measured in dB.
1.3.6.1.4.1.39003.5.1.2.5Scalarsub10RadioRmtLnkLossread-onlycurrentThe current link loss of the remote radio link, measured in dB.
1.3.6.1.4.1.39003.5.1.2.7Scalarsub10RadioRmtAlignmentModeread-onlycurrentThe remote radio unit's Alignment mode. Alignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0).
1.3.6.1.4.1.39003.5.1.2.8Scalarsub10RadioRmtAFERread-onlycurrentThe remote unit Air Frame Error Ratio in the last second. This is the % of lost air frames based on the UFEC count in the previous second divided by the expect…
1.3.6.1.4.1.39003.5.2Nodesub10RadioMgmt
1.3.6.1.4.1.39003.5.2.1Scalarsub10RadioMgmtTxPowerLimitread-writecurrentThe configured transmit power of radio link. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally…
1.3.6.1.4.1.39003.5.2.2Scalarsub10RadioMgmtTxRxFreqread-writecurrentThe configured TX/RX frequency pairs of radio link. Each enumerated option represents the TX and RX frequency pair settings in MHz. Options are available for E…
1.3.6.1.4.1.39003.5.2.3Scalarsub10RadioMgmtAPCModeread-writecurrentAutomatic Transmit Power Control. The initial setting of transmit power used is defined by sub10RadioMgmtTxPower. If sub10RadioMgmtAtpc is enabled then the tra…
1.3.6.1.4.1.39003.5.2.4Scalarsub10RadioMgmtModulationModeread-writecurrentSet the highest order Modulation Mode attempted by Adaptive Modulation. IMPORTANT: This object is controlled by transaction management. Any changes to this obj…
1.3.6.1.4.1.39003.5.2.5Scalarsub10RadioMgmtAmodread-writecurrentAdaptive Modulation mode.
1.3.6.1.4.1.39003.5.2.6Scalarsub10RadioMgmtAlignmentModeread-writecurrentAlignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode can be manually changed…
1.3.6.1.4.1.39003.5.2.8Scalarsub10RadioMgmtMWUChannelWidthread-writecurrentMWU Channel width. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a …
1.3.6.1.4.1.39003.5.2.9Nodesub10RadioMgmtStats
1.3.6.1.4.1.39003.5.2.9.1Scalarsub10RadioMgmtStats1dPersistread-writecurrentIf set to 'stateEnabled(1) the sub10RadioStats1dHistTable objects are stored and read in on startup. This makes the history non-volatile across unit resets.
1.3.6.1.4.1.39003.5.2.9.4Tablesub10RadioMgmtStatsActiveTablenot-accessiblecurrentThis table maintains an entry for each Radio statistic that is enabled and active.
1.3.6.1.4.1.39003.5.2.9.4.1Rowsub10RadioMgmtStatsActiveEntrynot-accessiblecurrentAn entry in the sub10RadioMgmtStatsActiveTable. Each entry represents an object instance of Radio stats and it's current state.
1.3.6.1.4.1.39003.5.2.9.4.1.1Columnsub10RadioMgmtStatsActiveIndexnot-accessiblecurrentThe number of Radio stats objects used as an index to this table.
1.3.6.1.4.1.39003.5.2.9.4.1.2Columnsub10RadioMgmtStatsActiveNameread-onlycurrentThe stats object name. This is the name of the ethernet stats object in the sub10RadioStatsCurrent group.
1.3.6.1.4.1.39003.5.2.9.4.1.3Columnsub10RadioMgmtStatsActiveStateread-writecurrentIf set to 'enabled' the statistic is active.
1.3.6.1.4.1.39003.5.3Nodesub10RadioStats
1.3.6.1.4.1.39003.5.3.1Scalarsub10RadioStatsTimeElapsedread-onlycurrentThe time that has elapsed from the beginning of the statistical measurement period. This is normally time from just after the last reboot time when the statist…
1.3.6.1.4.1.39003.5.3.2Nodesub10RadioStatsCurrent
1.3.6.1.4.1.39003.5.3.2.1Scalarsub10RadioStatsCurrTxPowerMinread-onlycurrentThe minimum value that the transmit power of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.2Scalarsub10RadioStatsCurrTxPowerMaxread-onlycurrentThe maximum value that the transmit power of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.3Scalarsub10RadioStatsCurrTxPowerAvgread-onlycurrentThe average value of the transmit power of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.4Scalarsub10RadioStatsCurrRxPowerMinread-onlycurrentThe minimum value that the receive power of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.5Scalarsub10RadioStatsCurrRxPowerMaxread-onlycurrentThe maximum value that the receive power of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.6Scalarsub10RadioStatsCurrRxPowerAvgread-onlycurrentThe average value of the receive power of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.7Scalarsub10RadioStatsCurrVectErrMinread-onlycurrentThe minimum value that the vector error of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.8Scalarsub10RadioStatsCurrVectErrMaxread-onlycurrentThe maximum value that the vector error of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.9Scalarsub10RadioStatsCurrVectErrAvgread-onlycurrentThe average value of the vector error of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.10Scalarsub10RadioStatsCurrLnkLossMinread-onlycurrentThe minimum value that the link loss of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.11Scalarsub10RadioStatsCurrLnkLossMaxread-onlycurrentThe maximum value that the link loss of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.12Scalarsub10RadioStatsCurrLnkLossAvgread-onlycurrentThe average value of the link loss of the local radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.13Scalarsub10RadioStatsCurrRxFrmsread-onlycurrentThe number of Airside frames received over the Radio interface. This is irrespective of whether the Airside frame transmitted contained any ethernet data. Set …
1.3.6.1.4.1.39003.5.3.2.14Scalarsub10RadioStatsCurrTxFrmsread-onlycurrentThe number of Airside frames transmitted over the Radio interface. This is irrespective of whether the Airside frame transmitted contained any ethernet data. S…
1.3.6.1.4.1.39003.5.3.2.15Scalarsub10RadioStatsCurrRxPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface. This includes all packets whether destined for the management sub-system on this unit or to b…
1.3.6.1.4.1.39003.5.3.2.16Scalarsub10RadioStatsCurrTxPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface. This does not include packets originating fro…
1.3.6.1.4.1.39003.5.3.2.17Scalarsub10RadioStatsCurrRxMgmtPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface and which are destined for the management sub-system on this unit. Set to zero on unit reset.
1.3.6.1.4.1.39003.5.3.2.18Scalarsub10RadioStatsCurrTxMgmtPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system. This does not include packets originating …
1.3.6.1.4.1.39003.5.3.2.19Scalarsub10RadioStatsCurrRxBadFrmsread-onlycurrentThe count of bad frames detected on the receive side of the Radio interface. A bad frame could be caused by any one of the following detected errors: UFEC Erro…
1.3.6.1.4.1.39003.5.3.2.24Scalarsub10RadioStatsCurrMWUTempMinread-onlycurrentThe minimum MWU temperature measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.25Scalarsub10RadioStatsCurrMWUTempMaxread-onlycurrentThe maximum MWU temperature measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.26Scalarsub10RadioStatsCurrMWUTempAvgread-onlycurrentThe average MWU temperature measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.27Scalarsub10RadioStatsCurrQPSKTo8PSKread-onlycurrentThe number transitions of Modulation Mode configuration from QPSK to 8PSK since unit reboot.
1.3.6.1.4.1.39003.5.3.2.28Scalarsub10RadioStatsCurr8PSKToQPSKread-onlycurrentThe number transitions of Modulation Mode configuration from 8PSK to QPSK since unit reboot.
1.3.6.1.4.1.39003.5.3.2.29Scalarsub10RadioStatsCurrAFERMinread-onlycurrentThe minimum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.2.30Scalarsub10RadioStatsCurrAFERMaxread-onlycurrentThe maximum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.2.31Scalarsub10RadioStatsCurrAFERAvgread-onlycurrentThe average AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.2.32Scalarsub10RadioStatsCurrRmtTxPowerAvgread-onlycurrentThe average value of the transmit power of the remote radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.33Scalarsub10RadioStatsCurrRmtRxPowerAvgread-onlycurrentThe average value of the receive power of the remote radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.34Scalarsub10RadioStatsCurrRmtVectErrAvgread-onlycurrentThe average value of the vector error of the remote radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.35Scalarsub10RadioStatsCurrRmtLnkLossAvgread-onlycurrentThe average value of the link loss of the remote radio link measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.36Scalarsub10RadioStatsCurrRmtMWUTempAvgread-onlycurrentThe average MWU temperature of the remote unit measured over the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.37Scalarsub10RadioStatsCurrRmtAFERAvgread-onlycurrentThe average AFER (Air Frame Error Ratio) of the remote unit in the previous rolling 60 seconds.
1.3.6.1.4.1.39003.5.3.2.38Scalarsub10RadioStatsCurrRxQPSKread-onlycurrentThe time in seconds that Rx modulation mode has been in QPSK since last reboot.
1.3.6.1.4.1.39003.5.3.2.39Scalarsub10RadioStatsCurrRx8PSKread-onlycurrentThe time in seconds that Rx modulation mode has been in 8PSK since last reboot.
1.3.6.1.4.1.39003.5.3.2.40Scalarsub10RadioStatsCurrTxQPSKread-onlycurrentThe time in seconds that Txmodulation mode has been in QPSK since last reboot.
1.3.6.1.4.1.39003.5.3.2.41Scalarsub10RadioStatsCurrTx8PSKread-onlycurrentThe time in seconds that Tx modulation mode has been in 8PSK since last reboot.
1.3.6.1.4.1.39003.5.3.3Nodesub10RadioStatsHistory
1.3.6.1.4.1.39003.5.3.3.1Nodesub10RadioStats1mHistory
1.3.6.1.4.1.39003.5.3.3.1.1Scalarsub10RadioStats1mHistIntvlsread-onlycurrentThe number of valid table entries in sub10RadioStats1mHistTable on this system. There is one entry per 1 minute interval. If the unit has been running for a mi…
1.3.6.1.4.1.39003.5.3.3.1.2Tablesub10RadioStats1mHistTablenot-accessiblecurrentThis table maintains a history of Radio statistics based on 1 minute intervals. There are a maximum of 60 intervals which represent 1 hour of data. This table …
1.3.6.1.4.1.39003.5.3.3.1.2.1Rowsub10RadioStats1mHistEntrynot-accessiblecurrentAn entry in the sub10RadioStats1mHistTable. Each entry represents 1 minute of performance management data where the first entry with index=1 is the most recent…
1.3.6.1.4.1.39003.5.3.3.1.2.1.1Columnsub10RadioStats1mHistIntvlnot-accessiblecurrentThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 minute interval) and have a maximum value of 60 (the least r…
1.3.6.1.4.1.39003.5.3.3.1.2.1.2Columnsub10RadioStats1mHistTimeread-writecurrentThe local system time when this 1m history entry was created. This represents the end of the 1 minute interval for which the associated stats with the same sub…
1.3.6.1.4.1.39003.5.3.3.1.2.1.3Columnsub10RadioStats1mHistTxPowerMinread-onlycurrentThe minimum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.1.2.1.4Columnsub10RadioStats1mHistTxPowerMaxread-onlycurrentThe maximum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.1.2.1.5Columnsub10RadioStats1mHistTxPowerAvgread-onlycurrentThe average value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.1.2.1.6Columnsub10RadioStats1mHistRxPowerMinread-onlycurrentThe minimum value that the receive power of the local radio link has reached in this minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.1.2.1.7Columnsub10RadioStats1mHistRxPowerMaxread-onlycurrentThe maximum value that the receive power of the local radio link has reached in this minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.1.2.1.8Columnsub10RadioStats1mHistRxPowerAvgread-onlycurrentThe average value that the receive power of the local radio link has reached in this minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.1.2.1.9Columnsub10RadioStats1mHistVectErrMinread-onlycurrentThe minimum value that the vector error of the local radio link has reached in this minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.1.2.1.10Columnsub10RadioStats1mHistVectErrMaxread-onlycurrentThe maximum value that the vector error of the local radio link has reached in this minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.1.2.1.11Columnsub10RadioStats1mHistVectErrAvgread-onlycurrentThe average value that the vector error of the local radio link has reached in this minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.1.2.1.12Columnsub10RadioStats1mHistLnkLossMinread-onlycurrentThe minimum value that the link loss of the local radio link has reached in this minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.1.2.1.13Columnsub10RadioStats1mHistLnkLossMaxread-onlycurrentThe maximum value that the link loss of the local radio link has reached in this minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.1.2.1.14Columnsub10RadioStats1mHistLnkLossAvgread-onlycurrentThe average value that the link loss of the local radio link has reached in this minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.1.2.1.15Columnsub10RadioStats1mHistMWUTempMinread-onlycurrentThe minimum MWU temperature measured in this minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.16Columnsub10RadioStats1mHistMWUTempMaxread-onlycurrentThe maximum MWU temperature measured in this minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.17Columnsub10RadioStats1mHistMWUTempAvgread-onlycurrentThe average MWU temperature measured in this minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.22Columnsub10RadioStats1mHistRxFrmsread-onlycurrentThe number of Airside frames received over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any ethe…
1.3.6.1.4.1.39003.5.3.3.1.2.1.23Columnsub10RadioStats1mHistTxFrmsread-onlycurrentThe number of Airside frames transmitted over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any e…
1.3.6.1.4.1.39003.5.3.3.1.2.1.24Columnsub10RadioStats1mHistRxPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface in this minute. This includes all packets whether destined for the management sub-system on th…
1.3.6.1.4.1.39003.5.3.3.1.2.1.25Columnsub10RadioStats1mHistTxPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this minute. This does not include packets …
1.3.6.1.4.1.39003.5.3.3.1.2.1.26Columnsub10RadioStats1mHistRxMgmtPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface in this minute and which are destined for the management sub-system on this unit.
1.3.6.1.4.1.39003.5.3.3.1.2.1.27Columnsub10RadioStats1mHistTxMgmtPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this minute. This does not include packe…
1.3.6.1.4.1.39003.5.3.3.1.2.1.28Columnsub10RadioStats1mHistRxBadFrmsread-onlycurrentThe count of bad frames detected on the receive side of the Radio interface in this minute.
1.3.6.1.4.1.39003.5.3.3.1.2.1.29Columnsub10RadioStats1mHistQPSKTo8PSKread-onlycurrentThe number transitions of Modulation Mode configuration from QPSK to 8PSK in the last 1 minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.30Columnsub10RadioStats1mHist8PSKToQPSKread-onlycurrentThe number transitions of Modulation Mode configuration from 8PSK to QPSK in the last 1 minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.31Columnsub10RadioStats1mHistAFERMinread-onlycurrentThe minimum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.1.2.1.32Columnsub10RadioStats1mHistAFERMaxread-onlycurrentThe maximum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.1.2.1.33Columnsub10RadioStats1mHistAFERAvgread-onlycurrentThe average AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.1.2.1.34Columnsub10RadioStats1mHistRxQPSKread-onlycurrentThe time in seconds that the Rx Modulation Mode was QPSK in the last 1 minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.35Columnsub10RadioStats1mHistRx8PSKread-onlycurrentThe time in seconds that the Rx Modulation Mode was 8PSK in the last 1 minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.36Columnsub10RadioStats1mHistTxQPSKread-onlycurrentThe time in seconds that the Tx Modulation Mode was QPSK in the last 1 minute interval.
1.3.6.1.4.1.39003.5.3.3.1.2.1.37Columnsub10RadioStats1mHistTx8PSKread-onlycurrentThe time in seconds that the Tx Modulation Mode was 8PSK in the last 1 minute interval.
1.3.6.1.4.1.39003.5.3.3.2Nodesub10RadioStats15mHistory
1.3.6.1.4.1.39003.5.3.3.2.1Scalarsub10RadioStats15mHistIntvlsread-onlycurrentThe number of valid table entries in sub10RadioStats15mHistTable on this system. There is one entry per 15 minute interval. If the unit has been running for a …
1.3.6.1.4.1.39003.5.3.3.2.2Tablesub10RadioStats15mHistTablenot-accessiblecurrentThis table maintains a history of Radio statistics based on 15 minute intervals. There are a maximum of 96 intervals which represent 24 hours of data. This tab…
1.3.6.1.4.1.39003.5.3.3.2.2.1Rowsub10RadioStats15mHistEntrynot-accessiblecurrentAn entry in the sub10RadioStats15mHistTable. Each entry represents 15 minutes performance management data where the first entry with index=1 is the most recent…
1.3.6.1.4.1.39003.5.3.3.2.2.1.1Columnsub10RadioStats15mHistIntvlnot-accessiblecurrentThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least …
1.3.6.1.4.1.39003.5.3.3.2.2.1.2Columnsub10RadioStats15mHistTimeread-writecurrentThe local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same s…
1.3.6.1.4.1.39003.5.3.3.2.2.1.3Columnsub10RadioStats15mHistTxPowerMinread-onlycurrentThe minimum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.2.2.1.4Columnsub10RadioStats15mHistTxPowerMaxread-onlycurrentThe maximum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.2.2.1.5Columnsub10RadioStats15mHistTxPowerAvgread-onlycurrentThe average value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.2.2.1.6Columnsub10RadioStats15mHistRxPowerMinread-onlycurrentThe minimum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.2.2.1.7Columnsub10RadioStats15mHistRxPowerMaxread-onlycurrentThe maximum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.2.2.1.8Columnsub10RadioStats15mHistRxPowerAvgread-onlycurrentThe average value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.2.2.1.9Columnsub10RadioStats15mHistVectErrMinread-onlycurrentThe minimum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.2.2.1.10Columnsub10RadioStats15mHistVectErrMaxread-onlycurrentThe maximum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.2.2.1.11Columnsub10RadioStats15mHistVectErrAvgread-onlycurrentThe average value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.2.2.1.12Columnsub10RadioStats15mHistLnkLossMinread-onlycurrentThe minimum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.2.2.1.13Columnsub10RadioStats15mHistLnkLossMaxread-onlycurrentThe maximum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.2.2.1.14Columnsub10RadioStats15mHistLnkLossAvgread-onlycurrentThe average value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.2.2.1.15Columnsub10RadioStats15mHistMWUTempMinread-onlycurrentThe minimum MWU temperature measured in this 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.16Columnsub10RadioStats15mHistMWUTempMaxread-onlycurrentThe maximum MWU temperature measured in this 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.17Columnsub10RadioStats15mHistMWUTempAvgread-onlycurrentThe average MWU temperature measured in this 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.22Columnsub10RadioStats15mHistRxFrmsread-onlycurrentThe number of Airside frames received over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained any …
1.3.6.1.4.1.39003.5.3.3.2.2.1.23Columnsub10RadioStats15mHistTxFrmsread-onlycurrentThe number of Airside frames transmitted over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained a…
1.3.6.1.4.1.39003.5.3.3.2.2.1.24Columnsub10RadioStats15mHistRxPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface in this 15 minutes. This includes all packets whether destined for the management sub-system o…
1.3.6.1.4.1.39003.5.3.3.2.2.1.25Columnsub10RadioStats15mHistTxPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this 15 minutes. This does not include pack…
1.3.6.1.4.1.39003.5.3.3.2.2.1.26Columnsub10RadioStats15mHistRxMgmtPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface in this 15 minutes and which are destined for the management sub-system on this unit.
1.3.6.1.4.1.39003.5.3.3.2.2.1.27Columnsub10RadioStats15mHistTxMgmtPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this 15 minutes. This does not include p…
1.3.6.1.4.1.39003.5.3.3.2.2.1.28Columnsub10RadioStats15mHistRxBadFrmsread-onlycurrentThe count of bad frames detected on the receive side of the Radio interface in this 15 minutes.
1.3.6.1.4.1.39003.5.3.3.2.2.1.29Columnsub10RadioStats15mHistQPSKTo8PSKread-onlycurrentThe number transitions of Modulation Mode configuration from QPSK to 8PSK in the last 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.30Columnsub10RadioStats15mHist8PSKToQPSKread-onlycurrentThe number transitions of Modulation Mode configuration from 8PSK to QPSK in the last 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.31Columnsub10RadioStats15mHistAFERMinread-onlycurrentThe minimum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.2.2.1.32Columnsub10RadioStats15mHistAFERMaxread-onlycurrentThe maximum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.2.2.1.33Columnsub10RadioStats15mHistAFERAvgread-onlycurrentThe average AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.2.2.1.34Columnsub10RadioStats15mHistRxQPSKread-onlycurrentThe time in seconds that the Rx Modulation Mode was QPSK in the last 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.35Columnsub10RadioStats15mHistRx8PSKread-onlycurrentThe time in seconds that the Rx Modulation Mode was 8PSK in the last 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.36Columnsub10RadioStats15mHistTxQPSKread-onlycurrentThe time in seconds that the Tx Modulation Mode was QPSK in the last 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.2.2.1.37Columnsub10RadioStats15mHistTx8PSKread-onlycurrentThe time in seconds that the Tx Modulation Mode was 8PSK in the last 15 minute interval.
1.3.6.1.4.1.39003.5.3.3.3Nodesub10RadioStats1dHistory
1.3.6.1.4.1.39003.5.3.3.3.1Scalarsub10RadioStats1dHistIntvlsread-onlycurrentThe number of valid table entries in sub10RadioStats1dHistTable on this system. There is one entry per 1 day interval. If the unit has been running for a minim…
1.3.6.1.4.1.39003.5.3.3.3.2Tablesub10RadioStats1dHistTablenot-accessiblecurrentThis table maintains a history of Radio statistics based on 1 day intervals. There are a maximum of 30 intervals which represent 30 days of data. This table al…
1.3.6.1.4.1.39003.5.3.3.3.2.1Rowsub10RadioStats1dHistEntrynot-accessiblecurrentAn entry in the sub10RadioStats1dHistTable. Each entry represents 1 day of performance management data where the first entry with index=1 is the most recent 1 …
1.3.6.1.4.1.39003.5.3.3.3.2.1.1Columnsub10RadioStats1dHistIntvlnot-accessiblecurrentThe interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 day interval) and have a maximum value of 24 (the least rece…
1.3.6.1.4.1.39003.5.3.3.3.2.1.2Columnsub10RadioStats1dHistTimeread-writecurrentThe local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10R…
1.3.6.1.4.1.39003.5.3.3.3.2.1.3Columnsub10RadioStats1dHistTxPowerMinread-onlycurrentThe minimum value that the transmit power of the local radio link has reached in this day interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.3.2.1.4Columnsub10RadioStats1dHistTxPowerMaxread-onlycurrentThe maximum value that the transmit power of the local radio link has reached in this day interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.3.2.1.5Columnsub10RadioStats1dHistTxPowerAvgread-onlycurrentThe average value that the transmit power of the local radio link has reached in this day interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.3.2.1.6Columnsub10RadioStats1dHistRxPowerMinread-onlycurrentThe minimum value that the receive power of the local radio link has reached in this day interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.3.2.1.7Columnsub10RadioStats1dHistRxPowerMaxread-onlycurrentThe maximum value that the receive power of the local radio link has reached in this day interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.3.2.1.8Columnsub10RadioStats1dHistRxPowerAvgread-onlycurrentThe average value that the receive power of the local radio link has reached in this day interval, measured in dBm.
1.3.6.1.4.1.39003.5.3.3.3.2.1.9Columnsub10RadioStats1dHistVectErrMinread-onlycurrentThe minimum value that the vector error of the local radio link has reached in this day interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.3.2.1.10Columnsub10RadioStats1dHistVectErrMaxread-onlycurrentThe maximum value that the vector error of the local radio link has reached in this day interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.3.2.1.11Columnsub10RadioStats1dHistVectErrAvgread-onlycurrentThe average value that the vector error of the local radio link has reached in this day interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.3.2.1.12Columnsub10RadioStats1dHistLnkLossMinread-onlycurrentThe minimum value that the link loss of the local radio link has reached in this day interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.3.2.1.13Columnsub10RadioStats1dHistLnkLossMaxread-onlycurrentThe maximum value that the link loss of the local radio link has reached in this day interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.3.2.1.14Columnsub10RadioStats1dHistLnkLossAvgread-onlycurrentThe average value that the link loss of the local radio link has reached in this day interval, measured in dB.
1.3.6.1.4.1.39003.5.3.3.3.2.1.15Columnsub10RadioStats1dHistMWUTempMinread-onlycurrentThe minimum MWU temperature measured in this day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.16Columnsub10RadioStats1dHistMWUTempMaxread-onlycurrentThe maximum MWU temperature measured in this day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.17Columnsub10RadioStats1dHistMWUTempAvgread-onlycurrentThe average MWU temperature measured in this day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.22Columnsub10RadioStats1dHistRxFrmsread-onlycurrentThe number of Airside frames received over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained an…
1.3.6.1.4.1.39003.5.3.3.3.2.1.23Columnsub10RadioStats1dHistTxFrmsread-onlycurrentThe number of Airside frames transmitted over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained…
1.3.6.1.4.1.39003.5.3.3.3.2.1.24Columnsub10RadioStats1dHistRxPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface in this day interval. This includes all packets whether destined for the management sub-system…
1.3.6.1.4.1.39003.5.3.3.3.2.1.25Columnsub10RadioStats1dHistTxPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this day interval. This does not include pa…
1.3.6.1.4.1.39003.5.3.3.3.2.1.26Columnsub10RadioStats1dHistRxMgmtPktsread-onlycurrentThe number of Ethernet packets received over the Radio interface in this day interval and which are destined for the management sub-system on this unit.
1.3.6.1.4.1.39003.5.3.3.3.2.1.27Columnsub10RadioStats1dHistTxMgmtPktsread-onlycurrentThe number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this day interval. This does not include…
1.3.6.1.4.1.39003.5.3.3.3.2.1.28Columnsub10RadioStats1dHistRxBadFrmsread-onlycurrentThe count of bad frames detected on the receive side of the Radio interface in this day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.29Columnsub10RadioStats1dHistQPSKTo8PSKread-onlycurrentThe number transitions of Modulation Mode configuration from QPSK to 8PSK in the last 1 day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.30Columnsub10RadioStats1dHist8PSKToQPSKread-onlycurrentThe number transitions of Modulation Mode configuration from 8PSK to QPSK in the last 1 day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.31Columnsub10RadioStats1dHistAFERMinread-onlycurrentThe minimum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.3.2.1.32Columnsub10RadioStats1dHistAFERMaxread-onlycurrentThe maximum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.3.2.1.33Columnsub10RadioStats1dHistAFERAvgread-onlycurrentThe average AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER.
1.3.6.1.4.1.39003.5.3.3.3.2.1.34Columnsub10RadioStats1dHistRxQPSKread-onlycurrentThe time in seconds that the Rx Modulation Mode was QPSK in the last 1 day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.35Columnsub10RadioStats1dHistRx8PSKread-onlycurrentThe time in seconds that the Rx Modulation Mode was 8PSK in the last 1 day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.36Columnsub10RadioStats1dHistTxQPSKread-onlycurrentThe time in seconds that the Tx Modulation Mode was QPSK in the last 1 day interval.
1.3.6.1.4.1.39003.5.3.3.3.2.1.37Columnsub10RadioStats1dHistTx8PSKread-onlycurrentThe time in seconds that the Tx Modulation Mode was 8PSK in the last 1 day interval.
1.3.6.1.4.1.39003.20Nodesub10MIBConformance
1.3.6.1.4.1.39003.20.1Nodesub10MIBCompliances
1.3.6.1.4.1.39003.20.1.1Compliancesub10CompliancecurrentThe compliance statement for Sub10 entities which implement the SUB10SYSTEMS-MIB.
1.3.6.1.4.1.39003.20.2Nodesub10MIBGroups
1.3.6.1.4.1.39003.20.2.1Groupsub10NotificationsGrpcurrentThis group defines objects that are members of the sub10NotificationsGrp group
1.3.6.1.4.1.39003.20.2.2Groupsub10UnitLocalStatusGrpcurrentThis group defines objects that are members of the sub10UnitLocalStatusGrp group
1.3.6.1.4.1.39003.20.2.3Groupsub10UnitLclAlarmStateEntryGrpcurrentThis group defines objects that are members of the sub10UnitLclAlarmStateEntryGrp group
1.3.6.1.4.1.39003.20.2.4Groupsub10UnitRemoteStatusGrpcurrentThis group defines objects that are members of the sub10UnitRemoteStatusGrp group
1.3.6.1.4.1.39003.20.2.5Groupsub10UnitMgmtSystemGrpcurrentThis group defines objects that are members of the sub10UnitMgmtSystemGrp group
1.3.6.1.4.1.39003.20.2.6Groupsub10UnitMgmtIpGrpcurrentThis group defines objects that are members of the sub10UnitMgmtIpGrp group
1.3.6.1.4.1.39003.20.2.7Groupsub10UnitMgmtVlanGrpcurrentThis group defines objects that are members of the sub10UnitMgmtVlanGrp group
1.3.6.1.4.1.39003.20.2.8Groupsub10UnitMgmtUsersGrpcurrentThis group defines objects that are members of the sub10UnitMgmtUsersGrp group
1.3.6.1.4.1.39003.20.2.9Groupsub10UnitMgmtUserEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtUserEntryGrp group
1.3.6.1.4.1.39003.20.2.10Groupsub10UnitMgmtTimeGrpcurrentThis group defines objects that are members of the sub10UnitMgmtTimeGrp group
1.3.6.1.4.1.39003.20.2.11Groupsub10UnitMgmtAlarmEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtAlarmEntryGrp group
1.3.6.1.4.1.39003.20.2.12Groupsub10UnitMgmtAlarmsGrpcurrentThis group defines objects that are members of the sub10UnitMgmtAlarmsGrp group
1.3.6.1.4.1.39003.20.2.13Groupsub10UnitMgmtSnmpGrpcurrentThis group defines objects that are members of the sub10UnitMgmtSnmpGrp group
1.3.6.1.4.1.39003.20.2.14Groupsub10UnitMgmtSnmpTrpDstEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtSnmpTrpDstEntryGrp group
1.3.6.1.4.1.39003.20.2.15Groupsub10UnitMgmtSnmpUserEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtSnmpUserEntryGrp group
1.3.6.1.4.1.39003.20.2.16Groupsub10UnitMgmtSnmpAccessEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtSnmpAccessEntryGrp group
1.3.6.1.4.1.39003.20.2.17Groupsub10UnitMgmtSnmpTargetEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtSnmpTargetEntryGrp group
1.3.6.1.4.1.39003.20.2.18Groupsub10UnitMgmtFirmwareGrpcurrentThis group defines objects that are members of the sub10UnitMgmtFirmwareGrp group
1.3.6.1.4.1.39003.20.2.19Groupsub10UnitMgmtFirmwareBankEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtFirmwareBankEntryGrp group
1.3.6.1.4.1.39003.20.2.20Groupsub10UnitMgmtDNSEntryGrpcurrentThis group defines objects that are members of the sub10UnitMgmtDNSEntryGrp group
1.3.6.1.4.1.39003.20.2.21Groupsub10UnitMgmtEncryptionGrpcurrentThis group defines objects that are members of the sub10UnitMgmtEncryptionGrp group
1.3.6.1.4.1.39003.20.2.22Groupsub10UnitMgmtLicenseGrpcurrentThis group defines objects that are members of the sub10UnitMgmtLicenseGrp group
1.3.6.1.4.1.39003.20.2.23Groupsub10UnitMgmtSyncEGrpcurrentThis group defines objects that are members of the sub10UnitMgmtSyncEGrp group
1.3.6.1.4.1.39003.20.2.24Groupsub10UnitMgmtActionsGrpcurrentThis group defines objects that are members of the sub10UnitMgmtActionsGrp group
1.3.6.1.4.1.39003.20.2.25Groupsub10EthernetLocalStatusGrpcurrentThis group defines objects that are members of the sub10EthernetLocalStatusGrp group
1.3.6.1.4.1.39003.20.2.26Groupsub10EthernetRemoteStatusGrpcurrentThis group defines objects that are members of the sub10EthernetRemoteStatusGrp group
1.3.6.1.4.1.39003.20.2.27Groupsub10EthMgmtPhyGrpcurrentThis group defines objects that are members of the sub10EthMgmtPhyGrp group
1.3.6.1.4.1.39003.20.2.28Groupsub10EthMgmtVlanGrpcurrentThis group defines objects that are members of the sub10EthMgmtVlanGrp group
1.3.6.1.4.1.39003.20.2.29Groupsub10EthMgmtVlanAllowedEntryGrpcurrentThis group defines objects that are members of the sub10EthMgmtVlanAllowedEntryGrp group
1.3.6.1.4.1.39003.20.2.30Groupsub10EthMgmtQoSGrpcurrentThis group defines objects that are members of the sub10EthMgmtQoSGrp group
1.3.6.1.4.1.39003.20.2.31Groupsub10EthMgmtQoSQEntryGrpcurrentThis group defines objects that are members of the sub10EthMgmtQoSQEntryGrp group
1.3.6.1.4.1.39003.20.2.32Groupsub10EthMgmtQoSVlanEntryGrpcurrentThis group defines objects that are members of the sub10EthMgmtQoSVlanEntryGrp group
1.3.6.1.4.1.39003.20.2.33Groupsub10EthMgmtQoSPCPEntryGrpcurrentThis group defines objects that are members of the sub10EthMgmtQoSPCPEntryGrp group
1.3.6.1.4.1.39003.20.2.34Groupsub10EthMgmtQoSDSCPEntryGrpcurrentThis group defines objects that are members of the sub10EthMgmtQoSDSCPEntryGrp group
1.3.6.1.4.1.39003.20.2.35Groupsub10EthMgmtQoSMPLSEntryGrpcurrentThis group defines objects that are members of the sub10EthMgmtQoSMPLSEntryGrp group
1.3.6.1.4.1.39003.20.2.36Groupsub10EthMgmtStatsActiveEntryGrpcurrentThis group defines objects that are members of the sub10EthMgmtStatsActiveEntryGrp group
1.3.6.1.4.1.39003.20.2.37Groupsub10EthernetStatsGrpcurrentThis group defines objects that are members of the sub10EthernetStatsGrp group
1.3.6.1.4.1.39003.20.2.38Groupsub10EthernetStatsCurrentGrpcurrentThis group defines objects that are members of the sub10EthernetStatsCurrentGrp group
1.3.6.1.4.1.39003.20.2.39Groupsub10EthernetStats15mHistoryGrpcurrentThis group defines objects that are members of the sub10EthernetStats15mHistoryGrp group
1.3.6.1.4.1.39003.20.2.40Groupsub10EthStats15mHistEntryGrpcurrentThis group defines objects that are members of the sub10EthStats15mHistEntryGrp group
1.3.6.1.4.1.39003.20.2.41Groupsub10EthStats1dHistoryGrpcurrentThis group defines objects that are members of the sub10EthStats1dHistoryGrp group
1.3.6.1.4.1.39003.20.2.42Groupsub10EthStats1dHistEntryGrpcurrentThis group defines objects that are members of the sub10EthStats1dHistEntryGrp group
1.3.6.1.4.1.39003.20.2.43Groupsub10RadioLocalStatusGrpcurrentThis group defines objects that are members of the sub10RadioLocalStatusGrp group
1.3.6.1.4.1.39003.20.2.44Groupsub10RadioRemoteStatusGrpcurrentThis group defines objects that are members of the sub10RadioRemoteStatusGrp group
1.3.6.1.4.1.39003.20.2.45Groupsub10RadioMgmtGrpcurrentThis group defines objects that are members of the sub10RadioMgmtGrp group
1.3.6.1.4.1.39003.20.2.46Groupsub10RadioMgmtStatsGrpcurrentThis group defines objects that are members of the sub10RadioMgmtStatsGrp group
1.3.6.1.4.1.39003.20.2.47Groupsub10RadioMgmtStatsActiveEntryGrpcurrentThis group defines objects that are members of the sub10RadioMgmtStatsActiveEntryGrp group
1.3.6.1.4.1.39003.20.2.48Groupsub10RadioStatsGrpcurrentThis group defines objects that are members of the sub10RadioStatsGrp group
1.3.6.1.4.1.39003.20.2.49Groupsub10RadioStatsCurrentGrpcurrentThis group defines objects that are members of the sub10RadioStatsCurrentGrp group
1.3.6.1.4.1.39003.20.2.50Groupsub10RadioStats1mHistoryGrpcurrentThis group defines objects that are members of the sub10RadioStats1mHistoryGrp group
1.3.6.1.4.1.39003.20.2.51Groupsub10RadioStats1mHistEntryGrpcurrentThis group defines objects that are members of the sub10RadioStats1mHistEntryGrp group
1.3.6.1.4.1.39003.20.2.52Groupsub10RadioStats15mHistoryGrpcurrentThis group defines objects that are members of the sub10RadioStats15mHistoryGrp group
1.3.6.1.4.1.39003.20.2.53Groupsub10RadioStats15mHistEntryGrpcurrentThis group defines objects that are members of the sub10RadioStats15mHistEntryGrp group
1.3.6.1.4.1.39003.20.2.54Groupsub10RadioStats1dHistoryGrpcurrentThis group defines objects that are members of the sub10RadioStats1dHistoryGrp group
1.3.6.1.4.1.39003.20.2.55Groupsub10RadioStats1dHistEntryGrpcurrentThis group defines objects that are members of the sub10RadioStats1dHistEntryGrp group
Type Definitions
NameSyntaxStatusDescription
Sub10AlarmIndexUnsigned32(1..128)currentThe MIB index used to define the range of indexing and size of the Alarm tables sub10UnitLclAlarmStateTable and sub10UnitMgmtAlarmTable.
Sub10AlarmNameOCTET STRING (SIZE (1..32))currentName convention for all notification types.
Sub10AlarmOperationINTEGER { lessThan(1), greaterThan(2), lessThanOrEqual(3), greaterThanOrEqual(4), equal(5), notEqual(6) }currentThe operation that is used to compare a measured value with a configured alarm threshold which controls the raising and clearing of alarms.
Sub10AlarmSeverityINTEGER { critical(1), major(2), minor(3), warning(4) }currentSeverity for notifications of type alarm
Sub10AlarmStateINTEGER { cleared(1), raised(2), stateUnknown(3) }currentAlarm state.
Sub10AlarmTypeINTEGER { sub10UnitAlarm(1), sub10EthernetAlarm(2), sub10RadioAlarm(3) }currentThe type of the alarm and defines the type of notification (trap) used to inform management entities.
Sub10AlignmentModeINTEGER { modeNormal(0), modeAlignment(1) }currentAlignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode is managed using sub10RadioMgmtAlignmentMode.
Sub10AlignmentModeLockINTEGER { modeUnlocked(0), modeLocked(1) }currentIf locked, the unit will not go into alignment mode when the alignment cap is removed.
Sub10DateTimeOCTET STRING (SIZE (19..19))currentThe generic Sub10 format for a date time string. Format is YYYY-MM-DD HH:MM:SS e.g. 2014-05-26 13:30:15
Sub10DuplexINTEGER { halfDuplex(1), fullDuplex(2), unknownDuplex(3) }currentThe operation of a duplex link link
Sub10EntryStatusINTEGER { entryInUse(1), entryNotInUse(2) }currentA general configuration type to indicate if a table row is in use or not in use. This differs from RowStatus which is a settable object used to create the existence of a row in a configurable table. Sub10EntryStatus is …
Sub10FirmwareBankUnsigned32(1..3)currentIdentifies the firmware bank number.
Sub10MacAddressOCTET STRING (SIZE (11..17))currentMAC Address in readable string format.
Sub10MDITypeINTEGER { mdi(1), mdix(2), mdiUnknown(3) }currentThe operation of a duplex link link. The setting of 'auto' is used only for configuration puprposes.
Sub10MeasuredObjectINTEGER { sub10UnitLclMWUTemperature(1), sub10RadioLclRxPower(2), sub10RadioLclVectErr(3), sub10RadioLclLnkLoss(4), sub10RadioLclTxPower(5), sub10RadioMgmtTxRxFreq(6), sub10RadioMgmtAPCMode(7), sub10RadioMgmtModulationMode(8), sub10RadioMgmtAlignmentMode(9), sub10RadioLclLinkStatus(10), sub10RadioLclRxModulationMode(11), sub10RadioLclTxModulationMode(12), sub10RadioStatsCurrTxPowerMin(20), sub10RadioStatsCurrTxPowerMax(21), sub10RadioStatsCurrTxPowerAvg(22), sub10RadioStatsCurrRxPowerMin(23), sub10RadioStatsCurrRxPowerMax(24), sub10RadioStatsCurrRxPowerAvg(25), sub10RadioStatsCurrVectErrMin(26), sub10RadioStatsCurrVectErrMax(27), sub10RadioStatsCurrVectErrAvg(28), sub10RadioStatsCurrLnkLossMin(29), sub10RadioStatsCurrLnkLossMax(30), sub10RadioStatsCurrLnkLossAvg(31), sub10RadioStatsCurrMWUTempMin(32), sub10RadioStatsCurrMWUTempMax(33), sub10RadioStatsCurrMWUTempAvg(34), sub10RadioStatsCurrAFERMin(35), sub10RadioStatsCurrAFERMax(36), sub10RadioStatsCurrAFERAvg(37), sub10RadioStats1mHistTxPowerMin(50), sub10RadioStats1mHistTxPowerMax(51), sub10RadioStats1mHistTxPowerAvg(52), sub10RadioStats1mHistRxPowerMin(53), sub10RadioStats1mHistRxPowerMax(54), sub10RadioStats1mHistRxPowerAvg(55), sub10RadioStats1mHistVectErrMin(56), sub10RadioStats1mHistVectErrMax(57), sub10RadioStats1mHistVectErrAvg(58), sub10RadioStats1mHistLnkLossMin(59), sub10RadioStats1mHistLnkLossMax(60), sub10RadioStats1mHistLnkLossAvg(61), sub10RadioStats1mHistMWUTempMin(62), sub10RadioStats1mHistMWUTempMax(63), sub10RadioStats1mHistMWUTempAvg(64), sub10RadioStats1mHistAFERMin(65), sub10RadioStats1mHistAFERMax(66), sub10RadioStats1mHistAFERAvg(67), sub10RadioStats1mHistRxPkts(68), sub10RadioStats1mHistTxPkts(69), sub10RadioStats1mHistRxMgmtPkts(70), sub10RadioStats1mHistTxMgmtPkts(71), sub10RadioStats1mHistRxBadFrms(72), sub10RadioStats1mHistQPSKTo8PSK(73), sub10RadioStats1mHist8PSKToQPSK(74), sub10RadioStats1mHistRxQPSK(75), sub10RadioStats1mHistRx8PSK(76), sub10RadioStats1mHistTxQPSK(77), sub10RadioStats1mHistTx8PSK(78), sub10RadioStats15mHistTxPowerMin(90), sub10RadioStats15mHistTxPowerMax(91), sub10RadioStats15mHistTxPowerAvg(92), sub10RadioStats15mHistRxPowerMin(93), sub10RadioStats15mHistRxPowerMax(94), sub10RadioStats15mHistRxPowerAvg(95), sub10RadioStats15mHistVectErrMin(96), sub10RadioStats15mHistVectErrMax(97), sub10RadioStats15mHistVectErrAvg(98), sub10RadioStats15mHistLnkLossMin(99), sub10RadioStats15mHistLnkLossMax(100), sub10RadioStats15mHistLnkLossAvg(101), sub10RadioStats15mHistMWUTempMin(102), sub10RadioStats15mHistMWUTempMax(103), sub10RadioStats15mHistMWUTempAvg(104), sub10RadioStats15mHistAFERMin(105), sub10RadioStats15mHistAFERMax(106), sub10RadioStats15mHistAFERAvg(107), sub10RadioStats15mHistRxPkts(108), sub10RadioStats15mHistTxPkts(109), sub10RadioStats15mHistRxMgmtPkts(110), sub10RadioStats15mHistTxMgmtPkts(111), sub10RadioStats15mHistRxBadFrms(112), sub10RadioStats15mHistQPSKTo8PSK(113), sub10RadioStats15mHist8PSKToQPSK(114), sub10RadioStats15mHistRxQPSK(115), sub10RadioStats15mHistRx8PSK(116), sub10RadioStats15mHistTxQPSK(117), sub10RadioStats15mHistTx8PSK(118), sub10EthLclLinkStatus(130), sub10EthStatsCurrRxMbps(140), sub10EthStatsCurrTxMbps(141), sub10EthStatsCurrRxMbpsMin(142), sub10EthStatsCurrRxMbpsMax(143), sub10EthStatsCurrRxMbpsAvg(144), sub10EthStatsCurrTxMbpsMin(145), sub10EthStatsCurrTxMbpsMax(146), sub10EthStatsCurrTxMbpsAvg(147), sub10EthStats1mHistRxOctets(160), sub10EthStats1mHistRxGoodFrms(161), sub10EthStats1mHistRxBcastFrms(162), sub10EthStats1mHistRxMcastFrms(163), sub10EthStats1mHistRxPauseFrms(164), sub10EthStats1mHistRxCRCErrs(165), sub10EthStats1mHistRxAlignErrs(166), sub10EthStats1mHistRxOversized(167), sub10EthStats1mHistRxJabberFrms(168), sub10EthStats1mHistRxUndersized(169), sub10EthStats1mHistRxFragments(170), sub10EthStats1mHistRxSOFOvrns(171), sub10EthStats1mHistTxOctets(172), sub10EthStats1mHistTxGoodFrms(173), sub10EthStats1mHistTxBcastFrms(174), sub10EthStats1mHistTxMcastFrms(175), sub10EthStats1mHistTxPauseFrms(176), sub10EthStats1mHistTxDeferred(177), sub10EthStats1mHistTxCollsn(178), sub10EthStats1mHistTxSnglCollsn(179), sub10EthStats1mHistTxMlplCollsn(180), sub10EthStats1mHistTxExsvCollsn(181), sub10EthStats1mHistTxLtCollsn(182), sub10EthStats1mHistTxCSenseErrs(183), sub10EthStats1mHistPkts64Octets(184), sub10EthStats1mHistPkts65T127(185), sub10EthStats1mHistPkts128T255(186), sub10EthStats1mHistPkts256T511(187), sub10EthStats1mHistPkts512T1023(188), sub10EthStats1mHistPkts1024TMax(189), sub10EthStats1mHistRxMbpsMin(190), sub10EthStats1mHistRxMbpsMax(191), sub10EthStats1mHistRxMbpsAvg(192), sub10EthStats1mHistTxMbpsMin(193), sub10EthStats1mHistTxMbpsMax(194), sub10EthStats1mHistTxMbpsAvg(195), sub10EthStats15mHistRxOctets(210), sub10EthStats15mHistRxGoodFrms(211), sub10EthStats15mHistRxBcastFrms(212), sub10EthStats15mHistRxMcastFrms(213), sub10EthStats15mHistRxPauseFrms(214), sub10EthStats15mHistRxCRCErrs(215), sub10EthStats15mHistRxAlignErrs(216), sub10EthStats15mHistRxOversized(217), sub10EthStats15mHistRxJabberFrms(218), sub10EthStats15mHistRxUndersized(219), sub10EthStats15mHistRxFragments(220), sub10EthStats15mHistRxSOFOvrns(221), sub10EthStats15mHistTxOctets(222), sub10EthStats15mHistTxGoodFrms(223), sub10EthStats15mHistTxBcastFrms(224), sub10EthStats15mHistTxMcastFrms(225), sub10EthStats15mHistTxPauseFrms(226), sub10EthStats15mHistTxDeferred(227), sub10EthStats15mHistTxCollsn(228), sub10EthStats15mHistTxSnglCollsn(229), sub10EthStats15mHistTxMlplCollsn(230), sub10EthStats15mHistTxExsvCollsn(231), sub10EthStats15mHistTxLtCollsn(232), sub10EthStats15mHistTxCSenseErrs(233), sub10EthStats15mHistPkts64Octets(234), sub10EthStats15mHistPkts65T127(235), sub10EthStats15mHistPkts128T255(236), sub10EthStats15mHistPkts256T511(237), sub10EthStats15mHistPkts512T1023(238), sub10EthStats15mHistPkts1024TMax(239), sub10EthStats15mHistRxMbpsMin(240), sub10EthStats15mHistRxMbpsMax(241), sub10EthStats15mHistRxMbpsAvg(242), sub10EthStats15mHistTxMbpsMin(243), sub10EthStats15mHistTxMbpsMax(244), sub10EthStats15mHistTxMbpsAvg(245), sub10RadioStats1dHistTxPowerMin(260), sub10RadioStats1dHistTxPowerMax(261), sub10RadioStats1dHistTxPowerAvg(262), sub10RadioStats1dHistRxPowerMin(263), sub10RadioStats1dHistRxPowerMax(264), sub10RadioStats1dHistRxPowerAvg(265), sub10RadioStats1dHistVectErrMin(266), sub10RadioStats1dHistVectErrMax(267), sub10RadioStats1dHistVectErrAvg(268), sub10RadioStats1dHistLnkLossMin(269), sub10RadioStats1dHistLnkLossMax(270), sub10RadioStats1dHistLnkLossAvg(271), sub10RadioStats1dHistMWUTempMin(272), sub10RadioStats1dHistMWUTempMax(273), sub10RadioStats1dHistMWUTempAvg(274), sub10RadioStats1dHistAFERMin(275), sub10RadioStats1dHistAFERMax(276), sub10RadioStats1dHistAFERAvg(277), sub10RadioStats1dHistRxPkts(278), sub10RadioStats1dHistTxPkts(279), sub10RadioStats1dHistRxMgmtPkts(280), sub10RadioStats1dHistTxMgmtPkts(281), sub10RadioStats1dHistRxBadFrms(282), sub10RadioStats1dHistQPSKTo8PSK(283), sub10RadioStats1dHist8PSKToQPSK(284), sub10RadioStats1dHistRxQPSK(285), sub10RadioStats1dHistRx8PSK(286), sub10RadioStats1dHistTxQPSK(287), sub10RadioStats1dHistTx8PSK(288), sub10EthStats1dHistRxOctets(300), sub10EthStats1dHistRxGoodFrms(301), sub10EthStats1dHistRxBcastFrms(302), sub10EthStats1dHistRxMcastFrms(303), sub10EthStats1dHistRxPauseFrms(304), sub10EthStats1dHistRxCRCErrs(305), sub10EthStats1dHistRxAlignErrs(306), sub10EthStats1dHistRxOversized(307), sub10EthStats1dHistRxJabberFrms(308), sub10EthStats1dHistRxUndersized(309), sub10EthStats1dHistRxFragments(310), sub10EthStats1dHistRxSOFOvrns(311), sub10EthStats1dHistTxOctets(312), sub10EthStats1dHistTxGoodFrms(313), sub10EthStats1dHistTxBcastFrms(314), sub10EthStats1dHistTxMcastFrms(315), sub10EthStats1dHistTxPauseFrms(316), sub10EthStats1dHistTxDeferred(317), sub10EthStats1dHistTxCollsn(318), sub10EthStats1dHistTxSnglCollsn(319), sub10EthStats1dHistTxMlplCollsn(320), sub10EthStats1dHistTxExsvCollsn(321), sub10EthStats1dHistTxLtCollsn(322), sub10EthStats1dHistTxCSenseErrs(323), sub10EthStats1dHistPkts64Octets(324), sub10EthStats1dHistPkts65T127(325), sub10EthStats1dHistPkts128T255(326), sub10EthStats1dHistPkts256T511(327), sub10EthStats1dHistPkts512T1023(328), sub10EthStats1dHistPkts1024TMax(329), sub10EthStats1dHistRxMbpsMin(330), sub10EthStats1dHistRxMbpsMax(331), sub10EthStats1dHistRxMbpsAvg(332), sub10EthStats1dHistTxMbpsMin(333), sub10EthStats1dHistTxMbpsMax(334), sub10EthStats1dHistTxMbpsAvg(335) }currentA MIB object that may be measured by Alarm Management or any other sub-system.
Sub10ModulationModeINTEGER { modebpsk(0), modeqpsk(1), mode8psk(2) }currentRadio Modulation Mode.
Sub10MWUTypeINTEGER { mwuTypeNone(0), mwuTypeVBand(1), mwuTypeEBand(2) }currentThe type of MWU.
Sub10NTPSyncStatusINTEGER { ntpOutOfSync(0), ntpInSync(1) }currentThe indication that the systems clock is synchronised with the NTP server.
Sub10OperStatusINTEGER { opStatusUp(1), opStatusDown(2), opStatusTesting(3), opStatusDormant(4), opStatusNotPresent(5), opStatusLowerLayerDown(6), opStatusUnknown(7) }currentThe status of the ethernet link
Sub10QoSQueueUnsigned32(0..7)currentIdentifies the QoS queue number for up to 8 queues.
Sub10RadioDataRateINTEGER { radioDataRate1000(0), radioDataRate700(1), radioDataRate500(2), radioDataRate300(3), radioDataRate100(4) }currentThe maximum data rate of the Airside interface.
Sub10RadioLinkStateINTEGER { radioLinkStateDown(0), radioLinkStateUp(1), radioLinkStateUnknown(2) }currentThe status of the radio link
Sub10Snmpv3AuthProtocolINTEGER { noAuth(1), md5(2), sha1(3) }currentThe SNMPv3 authentication protocol assigned to a group of SNMPv3 users.
Sub10Snmpv3PrivProtocolINTEGER { noPriv(1), des(2), aes(3) }currentThe SNMPv3 privacy protocol assigned to a group of SNMPv3 users.
Sub10Snmpv3SecurityLevelINTEGER { noAuthNoPriv(1), authNoPriv(2), authPriv(3) }currentThe SNMPv3 security level assigned to a group of SNMPv3 users.
Sub10StateINTEGER { stateDisabled(0), stateEnabled(1) }currentA general configuration type to indicate enabled or disabled.
Sub10StatsGroupINTEGER { statsGroupNone(1), statsGroupAll(2), statsGroupRadioCurr(3), statsGroupRadio1s(4), statsGroupRadio1m(5), statsGroupRadio15m(6), statsGroupRadio1d(7), statsGroupEthernetCurr(8), statsGroupEthernet1s(9), statsGroupEthernet1m(10), statsGroupEthernet15m(11), statsGroupEthernet1d(12), statsGroupRadioCurr60s(13) }currentThe type of stats.
Sub10TerminalTypeINTEGER { terminalA(0), terminalB(1) }currentSub10Systems terminal type. A link must have an 'A' end terminal and a 'B' end terminal.
Sub10ThroughputMbpsOCTET STRING (SIZE (0..32))currentThroughput in Mbps (MegaBits per second).
Sub10TxPowerLimitINTEGER { txPowerLimitNone(0), txPowerLimitMinus3(1), txPowerLimitMinus6(2), txPowerLimitMinus9(3), txPowerLimitMinus12(4), txPowerLimitMinus15(5) }currentThe settings for Transmit Power limit on the Radio interface. A value of txPowerLimitNone means the TxPower is not limited by the radio.
Sub10UnitTypeINTEGER { baseband100A(0), baseband100B(1), baseband1000A(2), baseband1000B(3), v100ROWA(4), v100ROWB(5), v100FCCA(6), v100FCCB(7), v1000ROWA(8), v1000ROWB(9), v1000FCCA(10), v1000FCCB2(11), e1000ROWA(12), e1000ROWB(13), e1000FCCA(14), e1000FCCB(15) }currentSub10Systems unit type.
Sub10UserGroupINTEGER { operation(1), administration(2), maintenance(3), engineer(4) }currentThe user group types. A user is assigned to a group where each group has specific access privileges.
Sub10VlanIdUnsigned32(0..4095)currentA VLAN Id (12 bits in the TCF part of an ethernet frame).
Sub10VlanPriorityUnsigned32(0..7)currentA VLAN Priority or PCP bits (3 bits in the TCF part of an ethernet frame). The priority PCP bits are based on 802.1p where 0 is the lowest and 7 is the highest. Priority Acronym Traffic Types 0 BK Background 1 BE Best E…
Sub10VlanTagActionINTEGER { tagActionNone(0), untag(1), tag(2), drop(3) }currentUsed in Vlan Mgmt to support Vlan tag manipulaton on the Ethernet interface.
MIB Viewer