SUN-ILOM-CONTROL-MIB
390 objects
SUN-ILOM-CONTROL-MIB.mib Version 3.0 Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. This MIB controls all Sun Integrated Lights Out Management devices.
Imported Objects
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.42 | Nodesun | |||
| 1.3.6.1.4.1.42.2 | Nodeproducts | |||
| 1.3.6.1.4.1.42.2.175 | Nodeilom | |||
| 1.3.6.1.4.1.42.2.175.102 | IdentityilomCtrlMIB | SUN-ILOM-CONTROL-MIB.mib Version 3.0 Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. This MIB controls all Sun Integrated Lights O… | ||
| 1.3.6.1.4.1.42.2.175.102.1 | NodeilomCtrlClients | |||
| 1.3.6.1.4.1.42.2.175.102.1.1 | NodeilomCtrlNtp | |||
| 1.3.6.1.4.1.42.2.175.102.1.1.1 | ScalarilomCtrlDeviceNTPServerOneIP | read-write | current | The IP address of the first NTP server used by the device. This property is ignored if NTP is not enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.1.2 | ScalarilomCtrlDeviceNTPServerTwoIP | read-write | current | The IP address of the second NTP server used by the device. This property is ignored if NTP is not enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.2 | NodeilomCtrlLdap | |||
| 1.3.6.1.4.1.42.2.175.102.1.2.1 | ScalarilomCtrlLdapEnabled | read-write | current | Specifies whether or not the LDAP client is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.2.2 | ScalarilomCtrlLdapServerIP | read-write | current | The IP address of the LDAP server used as a name service for user accounts. |
| 1.3.6.1.4.1.42.2.175.102.1.2.3 | ScalarilomCtrlLdapPortNumber | read-write | current | Specifies the port number for the LDAP client. |
| 1.3.6.1.4.1.42.2.175.102.1.2.4 | ScalarilomCtrlLdapBindDn | read-write | current | The distinguished name (DN) for the read-only proxy user used to bind to the LDAP server. Example: cn=proxyuser,ou=people,dc=sun,dc=com |
| 1.3.6.1.4.1.42.2.175.102.1.2.5 | ScalarilomCtrlLdapBindPassword | read-write | current | The password of a read-only proxy user which is used to bind to the LDAP server. This property is essentially write-only. The write-only access level is no lon… |
| 1.3.6.1.4.1.42.2.175.102.1.2.6 | ScalarilomCtrlLdapSearchBase | read-write | current | A search base in the LDAP database below which to find users. Example: ou=people,dc=sun,dc=com |
| 1.3.6.1.4.1.42.2.175.102.1.2.7 | ScalarilomCtrlLdapDefaultRole | read-write | deprecated | Specifies the role that a user authenticated via LDAP should have. ***NOTE: this object is deprecated and replaced by ilomCtrlLdapDefaultRoles. |
| 1.3.6.1.4.1.42.2.175.102.1.2.8 | ScalarilomCtrlLdapDefaultRoles | read-write | current | Specifies the role that a user authenticated via LDAP should have. This property supports the legacy roles of 'Administrator' or 'Operator', or any of the indi… |
| 1.3.6.1.4.1.42.2.175.102.1.3 | NodeilomCtrlRadius | |||
| 1.3.6.1.4.1.42.2.175.102.1.3.1 | ScalarilomCtrlRadiusEnabled | read-write | current | Specifies whether or not the RADIUS client is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.3.2 | ScalarilomCtrlRadiusServerIP | read-write | current | The IP address of the RADIUS server used as a name service for user accounts. |
| 1.3.6.1.4.1.42.2.175.102.1.3.3 | ScalarilomCtrlRadiusPortNumber | read-write | current | Specifies the port number for the RADIUS client. |
| 1.3.6.1.4.1.42.2.175.102.1.3.4 | ScalarilomCtrlRadiusSecret | read-write | current | The shared secret encryption key that is used to encypt traffic between the RADIUS client and server. |
| 1.3.6.1.4.1.42.2.175.102.1.3.5 | ScalarilomCtrlRadiusDefaultRole | read-write | deprecated | Specifies the role that a user authenticated via RADIUS should have. ***NOTE: this object is deprecated and replaced by ILOMCtrlUserRoles. |
| 1.3.6.1.4.1.42.2.175.102.1.3.6 | ScalarilomCtrlRadiusDefaultRoles | read-write | current | Specifies the role that a user authenticated via RADIUS should have. This property supports the legacy roles of 'Administrator' or 'Operator', or any of the in… |
| 1.3.6.1.4.1.42.2.175.102.1.4 | NodeilomCtrlRemoteSyslog | |||
| 1.3.6.1.4.1.42.2.175.102.1.4.1 | ScalarilomCtrlRemoteSyslogDest1 | read-write | current | The IP address of the first remote syslog destination (log host). |
| 1.3.6.1.4.1.42.2.175.102.1.4.2 | ScalarilomCtrlRemoteSyslogDest2 | read-write | current | The IP address of the second remote syslog destination (log host). |
| 1.3.6.1.4.1.42.2.175.102.1.5 | NodeilomCtrlActiveDirectory | |||
| 1.3.6.1.4.1.42.2.175.102.1.5.1 | ScalarilomCtrlActiveDirectoryEnabled | read-write | current | Specifies whether or not the Active Directory client is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.5.2 | ScalarilomCtrlActiveDirectoryIP | read-write | current | The IP address of the Active Directory server used as a name service for user accounts. |
| 1.3.6.1.4.1.42.2.175.102.1.5.3 | ScalarilomCtrlActiveDirectoryPortNumber | read-write | current | Specifies the port number for the Active Directory client. Specifying 0 as the port means auto-select while specifying 1-65535 configures the actual port. |
| 1.3.6.1.4.1.42.2.175.102.1.5.4 | ScalarilomCtrlActiveDirectoryDefaultRole | read-write | deprecated | Specifies the role that a user authenticated via Active Directory should have. Setting this property to 'Administrator' or 'Operator' will cause the Active Dir… |
| 1.3.6.1.4.1.42.2.175.102.1.5.5 | ScalarilomCtrlActiveDirectoryCertFileURI | read-write | current | This is the URI of a certificate file needed when Strict Cert Mode is enabled. Setting the URI causes the tranfer of the file, making the certificate available… |
| 1.3.6.1.4.1.42.2.175.102.1.5.6 | ScalarilomCtrlActiveDirectoryTimeout | read-write | current | Specifies the number of seconds to wait before timing out if the Active Directory Server is not responding. |
| 1.3.6.1.4.1.42.2.175.102.1.5.7 | ScalarilomCtrlActiveDirectoryStrictCertEnabled | read-write | current | Specifies whether or not the Strict Cert Mode is enabled for the Active Directory Client. If enabled, the Active Directory certificate must be uploaded to the … |
| 1.3.6.1.4.1.42.2.175.102.1.5.8 | ScalarilomCtrlActiveDirectoryCertFileStatus | read-only | current | A string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not. |
| 1.3.6.1.4.1.42.2.175.102.1.5.9 | TableilomCtrlActiveDirUserDomainTable | not-accessible | current | This table is used to configure domain information required for configuring the Active Directory client. |
| 1.3.6.1.4.1.42.2.175.102.1.5.9.1 | RowilomCtrlActiveDirUserDomainEntry | not-accessible | current | An entry for an Active Directory user domain. |
| 1.3.6.1.4.1.42.2.175.102.1.5.9.1.1 | ColumnilomCtrlActiveDirUserDomainId | not-accessible | current | An integer identifier of the Active Directory domain. |
| 1.3.6.1.4.1.42.2.175.102.1.5.9.1.2 | ColumnilomCtrlActiveDirUserDomain | read-write | current | This string should match exactly with an authentication domain on the Active Directory server. This string should contain a substitution string '<USERNAME>' wh… |
| 1.3.6.1.4.1.42.2.175.102.1.5.10 | TableilomCtrlActiveDirAdminGroupsTable | not-accessible | current | This table is used to configure admin group information required for configuring the Active Directory client. |
| 1.3.6.1.4.1.42.2.175.102.1.5.10.1 | RowilomCtrlActiveDirAdminGroupsEntry | not-accessible | current | An entry for an Active Directory admin group. |
| 1.3.6.1.4.1.42.2.175.102.1.5.10.1.1 | ColumnilomCtrlActiveDirAdminGroupId | not-accessible | current | An integer identifier of the Active Directory admin group entry. |
| 1.3.6.1.4.1.42.2.175.102.1.5.10.1.2 | ColumnilomCtrlActiveDirAdminGroupName | read-write | current | This string should contain a distinguished name that exactly matches one of the group names on the ActiveDirectory server. Any user belonging to one of these g… |
| 1.3.6.1.4.1.42.2.175.102.1.5.11 | TableilomCtrlActiveDirOperatorGroupsTable | not-accessible | current | This table is used to configure operator group information required for configuring the Active Directory client. |
| 1.3.6.1.4.1.42.2.175.102.1.5.11.1 | RowilomCtrlActiveDirOperatorGroupsEntry | not-accessible | current | An entry for an Active Directory operator group. |
| 1.3.6.1.4.1.42.2.175.102.1.5.11.1.1 | ColumnilomCtrlActiveDirOperatorGroupId | not-accessible | current | An integer identifier of the Active Directory operator group entry. |
| 1.3.6.1.4.1.42.2.175.102.1.5.11.1.2 | ColumnilomCtrlActiveDirOperatorGroupName | read-write | current | This string should contain a distinguished name that exactly matches one of the group names on the ActiveDirectory server. Any user belonging to one of these g… |
| 1.3.6.1.4.1.42.2.175.102.1.5.12 | TableilomCtrlActiveDirAlternateServerTable | not-accessible | current | This table is used to view and configure alternate server information for the Active Directory client. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1 | RowilomCtrlActiveDirAlternateServerEntry | not-accessible | current | An entry for an Active Directory alternate server. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.1 | ColumnilomCtrlActiveDirAlternateServerId | not-accessible | current | An integer identifier of the Active Directory alternate server table. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.2 | ColumnilomCtrlActiveDirAlternateServerIp | read-write | current | The IP address of the Active Directory alternate server used as a name service for user accounts. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.3 | ColumnilomCtrlActiveDirAlternateServerPort | read-write | current | Specifies the port number for the Active Directory alternate server. Specifying 0 as the port indicates that auto-select will use the well known port number. S… |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.4 | ColumnilomCtrlActiveDirAlternateServerCertStatus | read-only | current | A string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.5 | ColumnilomCtrlActiveDirAlternateServerCertURI | read-write | current | This is the URI of a certificate file needed when Strict Cert Mode is enabled. Setting the URI causes the tranfer of the file, making the certificate available… |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.6 | ColumnilomCtrlActiveDirAlternateServerCertClear | read-write | current | A variable that will clear the certificate info associated with the server when it is set to true. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.7 | ColumnilomCtrlActiveDirAlternateServerCertVersion | read-only | current | A string indicating the certificate version of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.8 | ColumnilomCtrlActiveDirAlternateServerCertSerialNo | read-only | current | A string showing the serial number of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.9 | ColumnilomCtrlActiveDirAlternateServerCertIssuer | read-only | current | A string showing the issuer of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.10 | ColumnilomCtrlActiveDirAlternateServerCertSubject | read-only | current | A string showing the subject of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.11 | ColumnilomCtrlActiveDirAlternateServerCertValidBegin | read-only | current | A string showing the valid start date of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.12.1.12 | ColumnilomCtrlActiveDirAlternateServerCertValidEnd | read-only | current | A string showing the valid end date of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.13 | ScalarilomCtrlActiveDirectoryLogDetail | read-write | current | Controls the amount of messages sent to the event log. The high priority has the least number of messages going to the log, while the lowest priority 'trace' h… |
| 1.3.6.1.4.1.42.2.175.102.1.5.14 | ScalarilomCtrlActiveDirectoryDefaultRoles | read-write | current | Specifies the role that a user authenticated via Active Directory should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any o… |
| 1.3.6.1.4.1.42.2.175.102.1.5.15 | TableilomCtrlActiveDirCustomGroupsTable | not-accessible | current | This table is used to configure custom group information required for configuring the Active Directory client. |
| 1.3.6.1.4.1.42.2.175.102.1.5.15.1 | RowilomCtrlActiveDirCustomGroupsEntry | not-accessible | current | An entry for an Active Directory custom group. |
| 1.3.6.1.4.1.42.2.175.102.1.5.15.1.1 | ColumnilomCtrlActiveDirCustomGroupId | not-accessible | current | An integer identifier of the Active Directory custom group entry. |
| 1.3.6.1.4.1.42.2.175.102.1.5.15.1.2 | ColumnilomCtrlActiveDirCustomGroupName | read-write | current | This string should contain a distinguished name that exactly matches one of the group names on the ActiveDirectory server. Any user belonging to one of these g… |
| 1.3.6.1.4.1.42.2.175.102.1.5.15.1.3 | ColumnilomCtrlActiveDirCustomGroupRoles | read-write | current | Specifies the role that a user authenticated via Active Directory should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any o… |
| 1.3.6.1.4.1.42.2.175.102.1.5.16 | ScalarilomCtrlActiveDirectoryCertClear | read-write | current | A variable that will clear the certificate info associated with the server when it is set to true. |
| 1.3.6.1.4.1.42.2.175.102.1.5.17 | ScalarilomCtrlActiveDirectoryCertVersion | read-only | current | A string indicating the certificate version of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.18 | ScalarilomCtrlActiveDirectoryCertSerialNo | read-only | current | A string showing the serial number of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.19 | ScalarilomCtrlActiveDirectoryCertIssuer | read-only | current | A string showing the issuer of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.20 | ScalarilomCtrlActiveDirectoryCertSubject | read-only | current | A string showing the subject of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.21 | ScalarilomCtrlActiveDirectoryCertValidBegin | read-only | current | A string showing the valid start date of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.22 | ScalarilomCtrlActiveDirectoryCertValidEnd | read-only | current | A string showing the valid end date of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.5.23 | ScalarilomCtrlActiveDirDnsLocatorEnabled | read-write | current | Specifies whether or not the Active Directory DNS Locator functionality is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.5.24 | TableilomCtrlActiveDirDnsLocatorQueryTable | not-accessible | current | This table is used to configure DNS Locator search queries used to locate the Active Directory server. |
| 1.3.6.1.4.1.42.2.175.102.1.5.24.1 | RowilomCtrlActiveDirDnsLocatorQueryEntry | not-accessible | current | An entry for an Active Directory DNS Locator search query. |
| 1.3.6.1.4.1.42.2.175.102.1.5.24.1.1 | ColumnilomCtrlActiveDirDnsLocatorQueryId | not-accessible | current | An integer identifier of the Active Directory DNS Locator Query entry. |
| 1.3.6.1.4.1.42.2.175.102.1.5.24.1.2 | ColumnilomCtrlActiveDirDnsLocatorQueryService | read-write | current | This string should contain the service name that will be used to perform the DNS query. The name may contain '<DOMAIN>' as a substitution marker, being replace… |
| 1.3.6.1.4.1.42.2.175.102.1.5.25 | ScalarilomCtrlActiveDirExpSearchEnabled | read-write | current | Specifies whether or not the Active Directory expanded search query functionality is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.5.26 | ScalarilomCtrlActiveDirStrictCredentialErrorEnabled | read-write | current | Specifies whether or not user credential errors for Active Directory cause the user credentials to be completely errored out, or if the credential validation i… |
| 1.3.6.1.4.1.42.2.175.102.1.6 | NodeilomCtrlSMTP | |||
| 1.3.6.1.4.1.42.2.175.102.1.6.1 | ScalarilomCtrlSMTPEnabled | read-write | current | Specifies whether or not the SMTP client is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.6.2 | ScalarilomCtrlSMTPServerIP | read-write | current | The IP address of the SMTP server used as a name service for user accounts. |
| 1.3.6.1.4.1.42.2.175.102.1.6.3 | ScalarilomCtrlSMTPPortNumber | read-write | current | Specifies the port number for the SMTP client. |
| 1.3.6.1.4.1.42.2.175.102.1.6.4 | ScalarilomCtrlSMTPCustomSender | read-write | current | An optional format to identify the sender or the 'from' address. Customizing this string allows the user to specify the exact contents (up to 80 chars) of the … |
| 1.3.6.1.4.1.42.2.175.102.1.7 | NodeilomCtrlLdapSsl | |||
| 1.3.6.1.4.1.42.2.175.102.1.7.1 | NodeilomCtrlLdapSslGlobalObj | |||
| 1.3.6.1.4.1.42.2.175.102.1.7.1.1 | ScalarilomCtrlLdapSslEnabled | read-write | current | Specifies whether or not the LDAP/SSL client is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.2 | ScalarilomCtrlLdapSslIP | read-write | current | The IP address of the LDAP/SSL server used as a directory service for user accounts. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.3 | ScalarilomCtrlLdapSslPortNumber | read-write | current | Specifies the port number for the LDAP/SSL client. Specifying 0 as the port means auto-select while specifying 1-65535 configures the actual port value. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.4 | ScalarilomCtrlLdapSslDefaultRole | read-write | current | Specifies the role that a user authenticated via LDAP/SSL should have. Setting this property to 'Administrator' or 'Operator' will cause the LDAP/SSL client to… |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.5 | ScalarilomCtrlLdapSslCertFileURI | read-write | current | The tftp URI of the LDAP/SSL server's certificate file that should be uploaded in order to perform certificate validation. Setting the URI causes the tranfer o… |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.6 | ScalarilomCtrlLdapSslTimeout | read-write | current | Specifies the number of seconds to wait before timing out if the LDAP/SSL Server is not responding. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.7 | ScalarilomCtrlLdapSslStrictCertEnabled | read-write | current | Specifies whether or not the Strict Cert Mode is enabled for the LDAP/SSL Client. If enabled, the LDAP/SSL server's certificate must be uploaded to the SP so t… |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.8 | ScalarilomCtrlLdapSslCertFileStatus | read-only | current | A string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.9 | ScalarilomCtrlLdapSslLogDetail | read-write | current | Controls the amount of messages sent to the event log. The high priority has the least number of messages going to the log, while the lowest priority 'trace' h… |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.10 | ScalarilomCtrlLdapSslDefaultRoles | read-write | current | Specifies the role that a user authenticated via LDAP/SSL should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any of the in… |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.11 | ScalarilomCtrlLdapSslCertFileClear | read-write | current | A variable that will clear the certificate info associated with the server when it is set to true. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.12 | ScalarilomCtrlLdapSslCertFileVersion | read-only | current | A string indicating the certificate version of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.13 | ScalarilomCtrlLdapSslCertFileSerialNo | read-only | current | A string showing the serial number of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.14 | ScalarilomCtrlLdapSslCertFileIssuer | read-only | current | A string showing the issuer of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.15 | ScalarilomCtrlLdapSslCertFileSubject | read-only | current | A string showing the subject of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.16 | ScalarilomCtrlLdapSslCertFileValidBegin | read-only | current | A string showing the valid start date of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.17 | ScalarilomCtrlLdapSslCertFileValidEnd | read-only | current | A string showing the valid end date of the certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.18 | ScalarilomCtrlLdapSslOptUsrMappingEnabled | read-write | current | Specifies whether or not the optional UserMapping feature is enabled. When this feature is enabled, a typical Manager style ldap bind is done first using the s… |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.19 | ScalarilomCtrlLdapSslOptUsrMappingAttrInfo | read-write | current | The attribute information used to lookup the user login name to the user's Distinguished Name (DN). Typically, it looks very much like a standard LDAP query or… |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.20 | ScalarilomCtrlLdapSslOptUsrMappingBindDn | read-write | current | The Distinguished Name used for the manager style ldap bind so that user lookups can be done. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.21 | ScalarilomCtrlLdapSslOptUsrMappingBindPw | read-write | current | The password string used for the manager style ldap bind. |
| 1.3.6.1.4.1.42.2.175.102.1.7.1.22 | ScalarilomCtrlLdapSslOptUsrMappingSearchBase | read-write | current | The search based used to attempt the user name look up as defined in the attribute information above. |
| 1.3.6.1.4.1.42.2.175.102.1.7.2 | TableilomCtrlLdapSslUserDomainTable | not-accessible | current | This table is used to configure domain information required for configuring the LDAP/SSL client. |
| 1.3.6.1.4.1.42.2.175.102.1.7.2.1 | RowilomCtrlLdapSslUserDomainEntry | not-accessible | current | An entry for an LDAP/SSL user domain. |
| 1.3.6.1.4.1.42.2.175.102.1.7.2.1.1 | ColumnilomCtrlLdapSslUserDomainId | not-accessible | current | An integer identifier of the LDAP/SSL domain. |
| 1.3.6.1.4.1.42.2.175.102.1.7.2.1.2 | ColumnilomCtrlLdapSslUserDomain | read-write | current | This string should match exactly with an authentication domain on the LDAP/SSL server. This string should contain a substitution string '<USERNAME>' which will… |
| 1.3.6.1.4.1.42.2.175.102.1.7.3 | TableilomCtrlLdapSslAdminGroupsTable | not-accessible | current | This table is used to configure Admin Group information required for configuring the LDAP/SSL client. |
| 1.3.6.1.4.1.42.2.175.102.1.7.3.1 | RowilomCtrlLdapSslAdminGroupsEntry | not-accessible | current | An entry for an LDAP/SSL Admin Group. |
| 1.3.6.1.4.1.42.2.175.102.1.7.3.1.1 | ColumnilomCtrlLdapSslAdminGroupId | not-accessible | current | An integer identifier of the LDAP/SSL AdminGroup entry. |
| 1.3.6.1.4.1.42.2.175.102.1.7.3.1.2 | ColumnilomCtrlLdapSslAdminGroupName | read-write | current | This string should contain a distinguished name that exactly matches one of the group names on the LDAP/SSL server. Any user belonging to one of these groups i… |
| 1.3.6.1.4.1.42.2.175.102.1.7.4 | TableilomCtrlLdapSslOperatorGroupsTable | not-accessible | current | This table is used to configure Operator Group information required for configuring the LDAP/SSL client. |
| 1.3.6.1.4.1.42.2.175.102.1.7.4.1 | RowilomCtrlLdapSslOperatorGroupsEntry | not-accessible | current | An entry for an LDAP/SSL Operator Group. |
| 1.3.6.1.4.1.42.2.175.102.1.7.4.1.1 | ColumnilomCtrlLdapSslOperatorGroupId | not-accessible | current | An integer identifier of the LDAP/SSL Operator Group entry. |
| 1.3.6.1.4.1.42.2.175.102.1.7.4.1.2 | ColumnilomCtrlLdapSslOperatorGroupName | read-write | current | This string should contain a distinguished name that exactly matches one of the group names on the LDAP/SSL server. Any user belonging to one of these groups i… |
| 1.3.6.1.4.1.42.2.175.102.1.7.5 | TableilomCtrlLdapSslAlternateServerTable | not-accessible | current | This table is used to view and configure alternate server information for the LDAP/SSL client. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1 | RowilomCtrlLdapSslAlternateServerEntry | not-accessible | current | An entry for an LDAP/SSL alternate server table. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.1 | ColumnilomCtrlLdapSslAlternateServerId | not-accessible | current | An integer identifier of the LDAP/SSL alternate server table. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.2 | ColumnilomCtrlLdapSslAlternateServerIp | read-write | current | The IP address of the LDAP/SSL alternate server used as directory server for user accounts. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.3 | ColumnilomCtrlLdapSslAlternateServerPort | read-write | current | Specifies the port number for the LDAP/SSL alternate server. Specifying 0 as the port indicates that auto-select will use the well known port number. Specifyin… |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.4 | ColumnilomCtrlLdapSslAlternateServerCertStatus | read-only | current | A string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.5 | ColumnilomCtrlLdapSslAlternateServerCertURI | read-write | current | This is the URI of a certificate file needed when Strict Cert Mode is enabled. Setting the URI causes the tranfer of the file, making the certificate available… |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.6 | ColumnilomCtrlLdapSslAlternateServerCertClear | read-write | current | A variable that will clear the certificate info associated with the server when it is set to true. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.7 | ColumnilomCtrlLdapSslAlternateServerCertVersion | read-only | current | A string indicating the certificate version of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.8 | ColumnilomCtrlLdapSslAlternateServerCertSerialNo | read-only | current | A string showing the serial number of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.9 | ColumnilomCtrlLdapSslAlternateServerCertIssuer | read-only | current | A string showing the issuer of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.10 | ColumnilomCtrlLdapSslAlternateServerCertSubject | read-only | current | A string showing the subject of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.11 | ColumnilomCtrlLdapSslAlternateServerCertValidBegin | read-only | current | A string showing the valid start date of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.5.1.12 | ColumnilomCtrlLdapSslAlternateServerCertValidEnd | read-only | current | A string showing the valid end date of the alternate server certificate file. |
| 1.3.6.1.4.1.42.2.175.102.1.7.6 | TableilomCtrlLdapSslCustomGroupsTable | not-accessible | current | This table is used to configure custom group information required for configuring the LDAP/SSL client. |
| 1.3.6.1.4.1.42.2.175.102.1.7.6.1 | RowilomCtrlLdapSslCustomGroupsEntry | not-accessible | current | An entry for an LDAP/SSLcustom group. |
| 1.3.6.1.4.1.42.2.175.102.1.7.6.1.1 | ColumnilomCtrlLdapSslCustomGroupId | not-accessible | current | An integer identifier of the LDAP/SSL custom group entry. |
| 1.3.6.1.4.1.42.2.175.102.1.7.6.1.2 | ColumnilomCtrlLdapSslCustomGroupName | read-write | current | This string should contain a distinguished name that exactly matches one of the group names on the LDAP/SSL server. Any user belonging to one of these groups i… |
| 1.3.6.1.4.1.42.2.175.102.1.7.6.1.3 | ColumnilomCtrlLdapSslCustomGroupRoles | read-write | current | Specifies the role that a user authenticated via LDAP/SSL should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any of the in… |
| 1.3.6.1.4.1.42.2.175.102.1.8 | NodeilomCtrlDNS | |||
| 1.3.6.1.4.1.42.2.175.102.1.8.1 | ScalarilomCtrlDNSNameServers | read-write | current | Specifies the nameserver for DNS. |
| 1.3.6.1.4.1.42.2.175.102.1.8.2 | ScalarilomCtrlDNSSearchPath | read-write | current | Specifies the searchpath for DNS. |
| 1.3.6.1.4.1.42.2.175.102.1.8.3 | ScalarilomCtrlDNSdhcpAutoDns | read-write | current | Specifies whether or not DHCP autodns is enabled. |
| 1.3.6.1.4.1.42.2.175.102.1.8.4 | ScalarilomCtrlDNSTimeout | read-write | current | Specifies the number of seconds to wait before timing out if the server does not respond. |
| 1.3.6.1.4.1.42.2.175.102.1.8.5 | ScalarilomCtrlDNSRetries | read-write | current | Specifies the number of times a request is attempted again, after a timeout. |
| 1.3.6.1.4.1.42.2.175.102.2 | NodeilomCtrlServices | |||
| 1.3.6.1.4.1.42.2.175.102.2.1 | NodeilomCtrlHttp | |||
| 1.3.6.1.4.1.42.2.175.102.2.1.1 | ScalarilomCtrlHttpEnabled | read-write | current | Specifies whether or not the embedded web server should be running and listening on the HTTP port. |
| 1.3.6.1.4.1.42.2.175.102.2.1.2 | ScalarilomCtrlHttpPortNumber | read-write | current | Specifies the port number that the embedded web server should listen to for HTTP requests. |
| 1.3.6.1.4.1.42.2.175.102.2.1.3 | ScalarilomCtrlHttpSecureRedirect | read-write | current | Specifies whether or not the embedded web server should redirect HTTP connections to HTTPS. |
| 1.3.6.1.4.1.42.2.175.102.2.2 | NodeilomCtrlHttps | |||
| 1.3.6.1.4.1.42.2.175.102.2.2.1 | ScalarilomCtrlHttpsEnabled | read-write | current | Specifies whether or not the embedded web server should be running and listening on the HTTPS port. |
| 1.3.6.1.4.1.42.2.175.102.2.2.2 | ScalarilomCtrlHttpsPortNumber | read-write | current | Specifies the port number that the embedded web server should listen to for HTTPS requests. |
| 1.3.6.1.4.1.42.2.175.102.2.3 | NodeilomCtrlSsh | |||
| 1.3.6.1.4.1.42.2.175.102.2.3.1 | ScalarilomCtrlSshRsaKeyFingerprint | read-only | current | The fingerprint of the RSA key used for the SSH protocol. |
| 1.3.6.1.4.1.42.2.175.102.2.3.2 | ScalarilomCtrlSshRsaKeyLength | read-only | current | The length of the RSA key used for the SSH protocol. |
| 1.3.6.1.4.1.42.2.175.102.2.3.3 | ScalarilomCtrlSshDsaKeyFingerprint | read-only | current | The fingerprint of the DSA key used for the SSH protocol. |
| 1.3.6.1.4.1.42.2.175.102.2.3.4 | ScalarilomCtrlSshDsaKeyLength | read-only | current | The length of the DSA key used for the SSH protocol. |
| 1.3.6.1.4.1.42.2.175.102.2.3.5 | ScalarilomCtrlSshGenerateNewKeyAction | read-write | current | This property is used to initiate a new public key generation. |
| 1.3.6.1.4.1.42.2.175.102.2.3.6 | ScalarilomCtrlSshGenerateNewKeyType | read-write | current | SSH new key type. The possible type are rsa(2), dsa(3). |
| 1.3.6.1.4.1.42.2.175.102.2.3.7 | ScalarilomCtrlSshRestartSshdAction | read-write | current | This property is used to initiate sshd restart. |
| 1.3.6.1.4.1.42.2.175.102.2.3.8 | ScalarilomCtrlSshEnabled | read-write | current | Speicfies whether or not the SSHD is enabled. |
| 1.3.6.1.4.1.42.2.175.102.2.4 | NodeilomCtrlSingleSignon | |||
| 1.3.6.1.4.1.42.2.175.102.2.4.1 | ScalarilomCtrlSingleSignonEnabled | read-write | current | Specified whether single sign-on authentication should be enabled on the device. Single sign-on allows tokens to be passed around so that it is not necessary t… |
| 1.3.6.1.4.1.42.2.175.102.3 | NodeilomCtrlNetwork | |||
| 1.3.6.1.4.1.42.2.175.102.3.1 | TableilomCtrlNetworkTable | not-accessible | current | A table listing all targets whose networks can be controlled. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1 | RowilomCtrlNetworkEntry | not-accessible | current | An entry for a target which can be reset. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.1 | ColumnilomCtrlNetworkTarget | not-accessible | current | This is the nomenclature name for a target which has a configurable network. On some systems, there are multiple targets which have networks. On a traditional,… |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.2 | ColumnilomCtrlNetworkMacAddress | read-only | current | Specifies the MAC address of the service processor or system controller. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.3 | ColumnilomCtrlNetworkIpDiscovery | read-only | current | Specifies whether the current target is configured to have static IP settings or whether these settings are retrieved dynamically from DHCP. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.4 | ColumnilomCtrlNetworkIpAddress | read-only | current | Indicates the current IP address for the given target. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.5 | ColumnilomCtrlNetworkIpGateway | read-only | current | Indicates the current IP gateway for the given target. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.6 | ColumnilomCtrlNetworkIpNetmask | read-only | current | Indicates the current IP netmask for the given target. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.7 | ColumnilomCtrlNetworkPendingIpDiscovery | read-write | current | This property is used to set the pending value for the mode of IP discovery for the given target. The possible values are static(1) or dynamic(2). Static value… |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.8 | ColumnilomCtrlNetworkPendingIpAddress | read-write | current | This property is used to set the pending IP address for the given target. This property does not take effect until the ilomCtrlNetworkCommitPending property is… |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.9 | ColumnilomCtrlNetworkPendingIpGateway | read-write | current | This property is used to set the pending IP gateway for the given target. This property does not take effect until the ilomCtrlNetworkCommitPending property is… |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.10 | ColumnilomCtrlNetworkPendingIpNetmask | read-write | current | This property is used to set the pending IP netmask for the given target. This property does not take effect until the ilomCtrlNetworkCommitPending property is… |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.11 | ColumnilomCtrlNetworkCommitPending | read-write | current | This property is used to commit pending properties for the given row. Settings this property to true(1) will cause the network to be reconfigured according to … |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.12 | ColumnilomCtrlNetworkOutOfBandMacAddress | read-only | current | Specifies the MAC address of the out of band management interface (where applicable) |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.13 | ColumnilomCtrlNetworkSidebandMacAddress | read-only | current | Specifies the MAC address of the sideband management interface (where applicable) |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.14 | ColumnilomCtrlNetworkPendingManagementPort | read-write | current | This property is used to set the pending management port for the giventarget. This property does not take effect until the ilomCtrlNetworkCommitPending propert… |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.15 | ColumnilomCtrlNetworkManagementPort | read-write | current | Indicates the current managment port for the given target |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.16 | ColumnilomCtrlNetworkDHCPServerAddr | read-only | current | The address of the DHCP server for this row. |
| 1.3.6.1.4.1.42.2.175.102.3.1.1.17 | ColumnilomCtrlNetworkState | read-write | current | Specifies whether or not the row is enabled. |
| 1.3.6.1.4.1.42.2.175.102.4 | NodeilomCtrlUsers | |||
| 1.3.6.1.4.1.42.2.175.102.4.1 | TableilomCtrlLocalUserAuthTable | not-accessible | deprecated | This table provides a listing of the current local users on a system along with their password state. ***NOTE: this table is deprecated and replaced with ilomC… |
| 1.3.6.1.4.1.42.2.175.102.4.1.1 | RowilomCtrlLocalUserAuthEntry | not-accessible | deprecated | An entry containing objects for a local user in the database. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserEntry. |
| 1.3.6.1.4.1.42.2.175.102.4.1.1.1 | ColumnilomCtrlLocalUserAuthUsername | not-accessible | deprecated | The username of a local user on the device. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserUsername. |
| 1.3.6.1.4.1.42.2.175.102.4.1.1.2 | ColumnilomCtrlLocalUserAuthPassword | read-create | deprecated | The password of a local user on the device. This property is essentially write-only. The write-only access level is no longer supported as of SNMPv2. This prop… |
| 1.3.6.1.4.1.42.2.175.102.4.1.1.3 | ColumnilomCtrlLocalUserAuthRole | read-write | deprecated | Specifies whether a user's password is assigned or unassigned. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserRoles. |
| 1.3.6.1.4.1.42.2.175.102.4.1.1.4 | ColumnilomCtrlLocalUserAuthRowStatus | read-create | deprecated | This object is used to create a new row or to delete an existing row in the table. This property can be set to either createAndWait(5) or destroy(6), to create… |
| 1.3.6.1.4.1.42.2.175.102.4.1.1.5 | ColumnilomCtrlLocalUserAuthCLIMode | read-write | deprecated | Allows the CLI mode to be configured on a per-user basis. The CLI mode determines which shell the user will interact with. If the 'default' mode is select, the… |
| 1.3.6.1.4.1.42.2.175.102.4.2 | TableilomCtrlLocalUserTable | not-accessible | current | This table provides a listing of the current local users on a system along with their password state. |
| 1.3.6.1.4.1.42.2.175.102.4.2.1 | RowilomCtrlLocalUserEntry | not-accessible | current | An entry containing objects for a local user in the database. |
| 1.3.6.1.4.1.42.2.175.102.4.2.1.1 | ColumnilomCtrlLocalUserUsername | not-accessible | current | The username of a local user on the device. |
| 1.3.6.1.4.1.42.2.175.102.4.2.1.2 | ColumnilomCtrlLocalUserPassword | read-create | current | The password of a local user on the device. This property is essentially write-only. The write-only access level is no longer supported as of SNMPv2. This prop… |
| 1.3.6.1.4.1.42.2.175.102.4.2.1.3 | ColumnilomCtrlLocalUserRoles | read-write | current | Specifies the role that is associated with a user. The roles can be assigned for the legacy roles of 'Administrator' or 'Operator', or any of the individual ro… |
| 1.3.6.1.4.1.42.2.175.102.4.2.1.4 | ColumnilomCtrlLocalUserRowStatus | read-create | current | This object is used to create a new row or to delete an existing row in the table. This property can be set to either createAndWait(5) or destroy(6), to create… |
| 1.3.6.1.4.1.42.2.175.102.4.2.1.5 | ColumnilomCtrlLocalUserCLIMode | read-write | current | Allows the CLI mode to be configured on a per-user basis. The CLI mode determines which shell the user will interact with. If the 'default' mode is select, the… |
| 1.3.6.1.4.1.42.2.175.102.5 | NodeilomCtrlSessions | |||
| 1.3.6.1.4.1.42.2.175.102.5.1 | TableilomCtrlSessionsTable | not-accessible | current | A table listing the current user sessions. |
| 1.3.6.1.4.1.42.2.175.102.5.1.1 | RowilomCtrlSessionsEntry | not-accessible | current | An entry for a current session. |
| 1.3.6.1.4.1.42.2.175.102.5.1.1.1 | ColumnilomCtrlSessionsId | not-accessible | current | The instance number of a given logged-in user. This property is necessary since the same user can be logged in multiple times. |
| 1.3.6.1.4.1.42.2.175.102.5.1.1.2 | ColumnilomCtrlSessionsUsername | read-only | current | The username of the user associated with the session. |
| 1.3.6.1.4.1.42.2.175.102.5.1.1.3 | ColumnilomCtrlSessionsConnectionType | read-only | current | The type of connection that the given user is using to access the device. |
| 1.3.6.1.4.1.42.2.175.102.5.1.1.4 | ColumnilomCtrlSessionsLoginTime | read-only | current | The date and time that the logged into the device. |
| 1.3.6.1.4.1.42.2.175.102.6 | NodeilomCtrlFirmwareMgmt | |||
| 1.3.6.1.4.1.42.2.175.102.6.1 | ScalarilomCtrlFirmwareMgmtVersion | read-only | current | The version of the current firmware image. |
| 1.3.6.1.4.1.42.2.175.102.6.2 | ScalarilomCtrlFirmwareBuildNumber | read-only | current | The build number of the current firmware image. |
| 1.3.6.1.4.1.42.2.175.102.6.3 | ScalarilomCtrlFirmwareBuildDate | read-only | current | The build date and time of the current firmware image. |
| 1.3.6.1.4.1.42.2.175.102.6.4 | ScalarilomCtrlFirmwareTFTPServerIP | read-write | current | The IP address of the TFTP server which will be used to download the the firmware image. |
| 1.3.6.1.4.1.42.2.175.102.6.5 | ScalarilomCtrlFirmwareTFTPFileName | read-write | current | The relative path of the new firmware image file on the TFTP server. |
| 1.3.6.1.4.1.42.2.175.102.6.6 | ScalarilomCtrlFirmwarePreserveConfig | read-write | current | This property determines whether the previous configuration of the device should be preserved after a firmware update. The configuration data includes all user… |
| 1.3.6.1.4.1.42.2.175.102.6.7 | ScalarilomCtrlFirmwareMgmtStatus | read-only | current | This property indicates the status of a firmware update. If a TFTP error occurred while attempting to upload a new firmware image, the value of this property w… |
| 1.3.6.1.4.1.42.2.175.102.6.8 | ScalarilomCtrlFirmwareMgmtAction | read-write | current | This property is used to initiate a firmware update using the values of the other firmware management properties as parameters. It can also clear the values of… |
| 1.3.6.1.4.1.42.2.175.102.6.9 | ScalarilomCtrlFirmwareMgmtFilesystemVersion | read-only | current | The version of the current file system. |
| 1.3.6.1.4.1.42.2.175.102.6.10 | ScalarilomCtrlFirmwareDelayBIOS | read-write | current | On servers that support a BIOS, this property is used to postpone the BIOS upgrade until the next server poweroff. Setting this property to 'false' will cause … |
| 1.3.6.1.4.1.42.2.175.102.7 | NodeilomCtrlLogs | |||
| 1.3.6.1.4.1.42.2.175.102.7.1 | NodeilomCtrlEventLog | |||
| 1.3.6.1.4.1.42.2.175.102.7.1.1 | TableilomCtrlEventLogTable | not-accessible | current | This table provides a list of the current entries in the event log. |
| 1.3.6.1.4.1.42.2.175.102.7.1.1.1 | RowilomCtrlEventLogEntry | not-accessible | current | An entry in the event logs table. |
| 1.3.6.1.4.1.42.2.175.102.7.1.1.1.1 | ColumnilomCtrlEventLogRecordID | not-accessible | current | The record number for a given the event log entry. |
| 1.3.6.1.4.1.42.2.175.102.7.1.1.1.2 | ColumnilomCtrlEventLogType | read-only | current | An integer representing the type of event. |
| 1.3.6.1.4.1.42.2.175.102.7.1.1.1.3 | ColumnilomCtrlEventLogTimestamp | read-only | current | The date and time that the event log entry was recorded. |
| 1.3.6.1.4.1.42.2.175.102.7.1.1.1.4 | ColumnilomCtrlEventLogClass | read-only | current | An integer representing the class of event. |
| 1.3.6.1.4.1.42.2.175.102.7.1.1.1.5 | ColumnilomCtrlEventLogSeverity | read-only | current | The event severity corresponding to the given log entry. |
| 1.3.6.1.4.1.42.2.175.102.7.1.1.1.6 | ColumnilomCtrlEventLogDescription | read-only | current | A textual description of the event. |
| 1.3.6.1.4.1.42.2.175.102.7.1.2 | ScalarilomCtrlEventLogClear | read-write | current | When set to 'true' clears the event log. |
| 1.3.6.1.4.1.42.2.175.102.8 | NodeilomCtrlAlerts | |||
| 1.3.6.1.4.1.42.2.175.102.8.1 | TableilomCtrlAlertsTable | not-accessible | current | This table is used to view and add alert rules. |
| 1.3.6.1.4.1.42.2.175.102.8.1.1 | RowilomCtrlAlertsEntry | not-accessible | current | An entry containing objects for an alert rule. |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.1 | ColumnilomCtrlAlertID | not-accessible | current | An integer ID associated with a given alert rule. |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.2 | ColumnilomCtrlAlertSeverity | read-write | current | This property specifies the mininum event severity which should trigger an alert, for a given class. |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.3 | ColumnilomCtrlAlertType | read-write | current | This property specifies the type of notification for a given alert. If the type is snmptrap(2) or ipmipet(3), the ilomCtrlAlertDestinationIP must be specified.… |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.4 | ColumnilomCtrlAlertDestinationIP | read-write | current | This property species the IP address to send alert notifications when the alert type is snmptrap(2), ipmipet(3), or remotesyslog(4). |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.5 | ColumnilomCtrlAlertDestinationEmail | read-write | current | This property species the email address to send alert notifications when the alert type is email(1). |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.6 | ColumnilomCtrlAlertSNMPVersion | read-write | current | The version of SNMP trap that should be used for the given alert rule. |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.7 | ColumnilomCtrlAlertSNMPCommunityOrUsername | read-write | current | This string specifies the community string to be used when the ilomCtrlAlertSNMPVersion property is set to 'v1' or 'v2c'. Alternatively, this string specifies … |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.8 | ColumnilomCtrlAlertDestinationPort | read-write | current | Destination port for SNMP traps, 0 maps to the default |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.9 | ColumnilomCtrlAlertEmailEventClassFilter | read-write | current | A class name or 'all' to filter emailed alerts on. |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.10 | ColumnilomCtrlAlertEmailEventTypeFilter | read-write | current | A type name or 'all' to filter emailed alerts on. |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.11 | ColumnilomCtrlAlertEmailCustomSender | read-write | current | An optional format to identify the sender or the 'from' address. Customizing this string allows the user to specify the exact contents (up to 80 chars) of the … |
| 1.3.6.1.4.1.42.2.175.102.8.1.1.12 | ColumnilomCtrlAlertEmailMessagePrefix | read-write | current | An optional string that can be added to the beginning of the message body. The prefix size can be up to 80 characters. |
| 1.3.6.1.4.1.42.2.175.102.9 | NodeilomCtrlClock | |||
| 1.3.6.1.4.1.42.2.175.102.9.1 | ScalarilomCtrlDateAndTime | read-write | current | The date and time of the device. |
| 1.3.6.1.4.1.42.2.175.102.9.2 | ScalarilomCtrlNTPEnabled | read-write | current | Specifies whether or not Network Time Protocol is enabled. |
| 1.3.6.1.4.1.42.2.175.102.9.3 | ScalarilomCtrlTimezone | read-write | current | The configured timezone string. |
| 1.3.6.1.4.1.42.2.175.102.10 | NodeilomCtrlSerial | |||
| 1.3.6.1.4.1.42.2.175.102.10.1 | ScalarilomCtrlSerialInternalPortPresent | read-only | current | Indicates whether the given device has an internal serial port that is configurable. The internal serial port is the connection between the host server and the… |
| 1.3.6.1.4.1.42.2.175.102.10.2 | ScalarilomCtrlSerialInternalPortBaudRate | read-write | current | Specifies the current baud rate setting for the internal serial port. This is only readable/settable if ilomCtrlSerialInternalPortPresent is true. |
| 1.3.6.1.4.1.42.2.175.102.10.3 | ScalarilomCtrlSerialExternalPortPresent | read-only | current | Indicates whether the given device has an external serial port that is configurable. |
| 1.3.6.1.4.1.42.2.175.102.10.4 | ScalarilomCtrlSerialExternalPortBaudRate | read-write | current | Specifies the current baud rate setting for the external serial port. This is only readable/settable if ilomCtrlSerialExternalPortPresent is true. |
| 1.3.6.1.4.1.42.2.175.102.10.5 | ScalarilomCtrlSerialExternalPortFlowControl | read-only | current | Specifies the current flowcontrol setting for the external serial port. This is only readable/settable if ilomCtrlSerialExternalPortPresent is true. |
| 1.3.6.1.4.1.42.2.175.102.11 | NodeilomCtrlPowerReset | |||
| 1.3.6.1.4.1.42.2.175.102.11.1 | NodeilomCtrlPowerControl | |||
| 1.3.6.1.4.1.42.2.175.102.11.1.1 | TableilomCtrlPowerTable | not-accessible | current | A table listing all targets whose power can be controlled. |
| 1.3.6.1.4.1.42.2.175.102.11.1.1.1 | RowilomCtrlPowerEntry | not-accessible | current | An entry for a power-controllable target. |
| 1.3.6.1.4.1.42.2.175.102.11.1.1.1.1 | ColumnilomCtrlPowerTarget | not-accessible | current | This is the nomenclature name for a target which supports power control. On some systems, there are multiple targets which support power control. On a traditio… |
| 1.3.6.1.4.1.42.2.175.102.11.1.1.1.2 | ColumnilomCtrlPowerAction | read-write | current | The action to apply to the given power control target. The possible actions are powerOn(1), powerOff(2), powerCycle(3), and powerSoft(4). When this value is re… |
| 1.3.6.1.4.1.42.2.175.102.11.2 | NodeilomCtrlResetControl | |||
| 1.3.6.1.4.1.42.2.175.102.11.2.1 | TableilomCtrlResetTable | not-accessible | current | A table listing all targets which can be reset. |
| 1.3.6.1.4.1.42.2.175.102.11.2.1.1 | RowilomCtrlResetEntry | not-accessible | current | An entry for a target which can be reset. |
| 1.3.6.1.4.1.42.2.175.102.11.2.1.1.1 | ColumnilomCtrlResetTarget | not-accessible | current | This is the nomenclature name for a target which supports reset capabilities. On some systems, there are multiple targets which support reset. On most systems,… |
| 1.3.6.1.4.1.42.2.175.102.11.2.1.1.2 | ColumnilomCtrlResetAction | read-write | current | The action to apply to the given reset control target. The possible actions are reset(1), which is a normal reset, resetNonMaskableInterrupt(2) which is a forc… |
| 1.3.6.1.4.1.42.2.175.102.12 | NodeilomCtrlRedundancy | |||
| 1.3.6.1.4.1.42.2.175.102.12.1 | ScalarilomCtrlRedundancyStatus | read-only | current | This property indicates the status of the device in a redundant configuration. It may be active(2) or standby(3) when configured as a redundant pair or standAl… |
| 1.3.6.1.4.1.42.2.175.102.12.2 | ScalarilomCtrlRedundancyAction | read-write | current | This action is used to promote or demote this device from active or standy status. |
| 1.3.6.1.4.1.42.2.175.102.12.3 | ScalarilomCtrlRedundancyFRUName | read-only | current | FRU Name of the CMM on which this agent is running. |
| 1.3.6.1.4.1.42.2.175.102.13 | NodeilomCtrlPolicy | |||
| 1.3.6.1.4.1.42.2.175.102.13.1 | TableilomCtrlPolicyTable | not-accessible | current | A table listing all policies that can be administered. |
| 1.3.6.1.4.1.42.2.175.102.13.1.1 | RowilomCtrlPolicyEntry | not-accessible | current | An entry for a policy which can be enabled or disabled. |
| 1.3.6.1.4.1.42.2.175.102.13.1.1.1 | ColumnilomCtrlPolicyId | not-accessible | current | An integer identifier of the policy. |
| 1.3.6.1.4.1.42.2.175.102.13.1.1.2 | ColumnilomCtrlPolicyShortStr | read-only | current | A short description of the policy. |
| 1.3.6.1.4.1.42.2.175.102.13.1.1.3 | ColumnilomCtrlPolicyLongStr | read-only | current | A verbose description of the policy. |
| 1.3.6.1.4.1.42.2.175.102.13.1.1.4 | ColumnilomCtrlPolicyEnabled | read-write | current | Indicates the status of the policy. |
| 1.3.6.1.4.1.42.2.175.102.14 | NodeilomCtrlConfigMgmt | |||
| 1.3.6.1.4.1.42.2.175.102.14.1 | ScalarilomCtrlResetToDefaultsAction | read-write | current | This property is used to initiate the action of restoring the configuration on the SP to the original factory default state. |
| 1.3.6.1.4.1.42.2.175.102.14.2 | NodeilomCtrlBackupAndRestore | |||
| 1.3.6.1.4.1.42.2.175.102.14.2.1 | ScalarilomCtrlBackupAndRestoreTargetURI | read-write | current | This property is used to set target destination of configuration xml file during backup and restore. The syntax is {protocol}://[user:passwword]@]host[/][path/… |
| 1.3.6.1.4.1.42.2.175.102.14.2.2 | ScalarilomCtrlBackupAndRestorePassphrase | read-write | current | This property is used to set passphrase for encrypt/decrypt sensitive data during backup and restore. For snmpget, it returns null as value. |
| 1.3.6.1.4.1.42.2.175.102.14.2.3 | ScalarilomCtrlBackupAndRestoreAction | read-write | current | This property is used to issue a action, either backup or restore. |
| 1.3.6.1.4.1.42.2.175.102.14.2.4 | ScalarilomCtrlBackupAndRestoreActionStatus | read-only | current | This property is used to monitor the current status of backup/restore. |
| 1.3.6.1.4.1.42.2.175.102.15 | NodeilomCtrlSPARC | |||
| 1.3.6.1.4.1.42.2.175.102.15.1 | NodeilomCtrlSPARCDiags | |||
| 1.3.6.1.4.1.42.2.175.102.15.1.1 | ScalarilomCtrlSPARCDiagsLevel | read-write | deprecated | Indicates the level of embedded diagnostics that should be run on the host during a boot. ***NOTE: this object is deprecated and replaced with these: ilomCtrlS… |
| 1.3.6.1.4.1.42.2.175.102.15.1.2 | ScalarilomCtrlSPARCDiagsTrigger | read-write | current | Indicates the triggers of embedded diagnostics for the host. |
| 1.3.6.1.4.1.42.2.175.102.15.1.3 | ScalarilomCtrlSPARCDiagsVerbosity | read-write | deprecated | Indicates the verbosity level of embedded diagnostics that should be run on the host during a boot. ***NOTE: this object is deprecated and replaced with these:… |
| 1.3.6.1.4.1.42.2.175.102.15.1.4 | ScalarilomCtrlSPARCDiagsMode | read-write | current | Indicates the modes for POST. POST will stop at the mode specified by this property. |
| 1.3.6.1.4.1.42.2.175.102.15.1.5 | ScalarilomCtrlSPARCDiagsPowerOnLevel | read-write | current | Indicates the level of embedded diagnostics that should be run on the host during a boot for the power-on-reset trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.1.6 | ScalarilomCtrlSPARCDiagsUserResetLevel | read-write | current | Indicates the level of embedded diagnostics that should be run on the host during a boot for the user-reset trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.1.7 | ScalarilomCtrlSPARCDiagsErrorResetLevel | read-write | current | Indicates the level of embedded diagnostics that should be run on the host during a boot for the error-reset trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.1.8 | ScalarilomCtrlSPARCDiagsPowerOnVerbosity | read-write | current | Indicates the verbosity level of embedded diagnostics that should be run on the host during a boot for power-on-reset trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.1.9 | ScalarilomCtrlSPARCDiagsUserResetVerbosity | read-write | current | Indicates the verbosity level of embedded diagnostics that should be run on the host during a boot for user-reset trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.1.10 | ScalarilomCtrlSPARCDiagsErrorResetVerbosity | read-write | current | Indicates the verbosity level of embedded diagnostics that should be run on the host during a boot for error-reset trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.1.11 | ScalarilomCtrlSPARCDiagsStatus | read-only | current | Indicates the progress of POST diagnostics on the host, expressed as a percentage. |
| 1.3.6.1.4.1.42.2.175.102.15.1.12 | ScalarilomCtrlSPARCDiagsAction | read-write | current | An action to take to control POST running on the host. |
| 1.3.6.1.4.1.42.2.175.102.15.1.13 | ScalarilomCtrlSPARCDiagsHwChangeLevel | read-write | current | Indicates the level of embedded diagnostics that should be run on the host during a boot for the hw-change trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.1.14 | ScalarilomCtrlSPARCDiagsHwChangeVerbosity | read-write | current | Indicates the verbosity level of embedded diagnostics that should be run on the host during a boot for hw-change trigger. |
| 1.3.6.1.4.1.42.2.175.102.15.2 | NodeilomCtrlSPARCHostControl | |||
| 1.3.6.1.4.1.42.2.175.102.15.2.1 | ScalarilomCtrlSPARCHostMACAddress | read-only | current | Displays the starting MAC address for the host. |
| 1.3.6.1.4.1.42.2.175.102.15.2.3 | ScalarilomCtrlSPARCHostOBPVersion | read-only | current | Displays the version string for OBP. |
| 1.3.6.1.4.1.42.2.175.102.15.2.4 | ScalarilomCtrlSPARCHostPOSTVersion | read-only | current | Displays the version string for POST. |
| 1.3.6.1.4.1.42.2.175.102.15.2.6 | ScalarilomCtrlSPARCHostAutoRunOnError | read-write | current | This option determines whether the host should continue to boot in the event of a non-fatal POST error. |
| 1.3.6.1.4.1.42.2.175.102.15.2.7 | ScalarilomCtrlSPARCHostPOSTStatus | read-only | current | A string that describes the status of POST. ***NOTE: OS Boot status is ilomCtrlSPARCHostOSBootStatus. |
| 1.3.6.1.4.1.42.2.175.102.15.2.8 | ScalarilomCtrlSPARCHostAutoRestartPolicy | read-write | current | This determines what action the SP should take when it discovers that the host is hung. |
| 1.3.6.1.4.1.42.2.175.102.15.2.9 | ScalarilomCtrlSPARCHostOSBootStatus | read-only | current | A string that describes the boot status of host OS. |
| 1.3.6.1.4.1.42.2.175.102.15.2.10 | ScalarilomCtrlSPARCHostBootTimeout | read-write | current | This is the boot timer time out value. |
| 1.3.6.1.4.1.42.2.175.102.15.2.11 | ScalarilomCtrlSPARCHostBootRestart | read-write | current | This determines what action the SP should take when the boot timer expires. |
| 1.3.6.1.4.1.42.2.175.102.15.2.12 | ScalarilomCtrlSPARCHostMaxBootFail | read-write | current | This is the number of max boot failures allowed. |
| 1.3.6.1.4.1.42.2.175.102.15.2.13 | ScalarilomCtrlSPARCHostBootFailRecovery | read-write | current | This determines what action the SP should take when the max boot failures are reached. |
| 1.3.6.1.4.1.42.2.175.102.15.2.14 | ScalarilomCtrlSPARCHostHypervisorVersion | read-only | current | Displays the version string for Hypervisor. |
| 1.3.6.1.4.1.42.2.175.102.15.2.15 | ScalarilomCtrlSPARCHostSysFwVersion | read-only | current | Displays the version string for SysFw. |
| 1.3.6.1.4.1.42.2.175.102.15.2.16 | ScalarilomCtrlSPARCHostSendBreakAction | read-write | current | Send Break Action to Host |
| 1.3.6.1.4.1.42.2.175.102.15.2.17 | ScalarilomCtrlSPARCHostIoReconfigurePolicy | read-write | current | This determines the host IO reconfiguration policy to apply on next host power-on. |
| 1.3.6.1.4.1.42.2.175.102.15.2.18 | ScalarilomCtrlSPARCHostGMVersion | read-only | current | Displays the version string for Guest Manager. |
| 1.3.6.1.4.1.42.2.175.102.15.3 | NodeilomCtrlSPARCBootMode | |||
| 1.3.6.1.4.1.42.2.175.102.15.3.1 | ScalarilomCtrlSPARCBootModeState | read-write | current | Configures the boot mode state for the host. Specifying 'normal' means that the host retains current NVRAM variable settings. Specifying 'resetNvram' means tha… |
| 1.3.6.1.4.1.42.2.175.102.15.3.2 | ScalarilomCtrlSPARCBootModeScript | read-write | current | Specifies the script to run when host boots. |
| 1.3.6.1.4.1.42.2.175.102.15.3.3 | ScalarilomCtrlSPARCBootModeExpires | read-only | current | Displays the date and time for when the boot mode configuration should expire. |
| 1.3.6.1.4.1.42.2.175.102.15.3.4 | ScalarilomCtrlSPARCBootModeLDOMConfig | read-write | current | This string refers to the config name value that must either be 'default' or match a named LDOM configuration downloaded to the service processor using the LDO… |
| 1.3.6.1.4.1.42.2.175.102.15.4 | NodeilomCtrlSPARCKeySwitch | |||
| 1.3.6.1.4.1.42.2.175.102.15.4.1 | ScalarilomCtrlSPARCKeySwitchState | read-write | current | Specifies the current state of the virtual key switch. |
| 1.3.6.1.4.1.42.2.175.102.16 | NodeilomCtrlIdentification | |||
| 1.3.6.1.4.1.42.2.175.102.16.1 | ScalarilomCtrlSystemIdentifier | read-write | current | This string, which is often the host name of the server associated with ILOM, will be sent out in the varbind for all traps that ILOM generates. |
| 1.3.6.1.4.1.42.2.175.102.16.2 | ScalarilomCtrlHostName | read-write | current | This string is the hostname for ILOM. |
| 1.3.6.1.4.1.42.2.175.102.17 | NodeilomCtrlThd | |||
| 1.3.6.1.4.1.42.2.175.102.17.1 | ScalarilomCtrlThdState | read-only | current | The state of the THD daemon. |
| 1.3.6.1.4.1.42.2.175.102.17.2 | ScalarilomCtrlThdAction | read-write | current | Control action for THD daemon, either suspend or resume. |
| 1.3.6.1.4.1.42.2.175.102.17.3 | TableilomCtrlThdModulesTable | not-accessible | current | A table listing the currently loaded THD modules. |
| 1.3.6.1.4.1.42.2.175.102.17.3.1 | RowilomCtrlThdModulesEntry | not-accessible | current | An entry for a currently loaded THD module. |
| 1.3.6.1.4.1.42.2.175.102.17.3.1.1 | ColumnilomCtrlThdModuleName | not-accessible | current | The name of the THD module. |
| 1.3.6.1.4.1.42.2.175.102.17.3.1.2 | ColumnilomCtrlThdModuleDesc | read-only | current | The description of the THD module. |
| 1.3.6.1.4.1.42.2.175.102.17.3.1.3 | ColumnilomCtrlThdModuleState | read-only | current | The state of the THD module. |
| 1.3.6.1.4.1.42.2.175.102.17.3.1.4 | ColumnilomCtrlThdModuleAction | read-write | current | The control action for the THD module. |
| 1.3.6.1.4.1.42.2.175.102.17.4 | TableilomCtrlThdInstanceTable | not-accessible | current | A table listing instances of currently loaded THD modules. |
| 1.3.6.1.4.1.42.2.175.102.17.4.1 | RowilomCtrlThdInstanceEntry | not-accessible | current | An entry for a currently loaded THD module. |
| 1.3.6.1.4.1.42.2.175.102.17.4.1.1 | ColumnilomCtrlThdModName | not-accessible | current | The name of the THD class of the instance. |
| 1.3.6.1.4.1.42.2.175.102.17.4.1.2 | ColumnilomCtrlThdInstanceName | not-accessible | current | The name of the instance. |
| 1.3.6.1.4.1.42.2.175.102.17.4.1.3 | ColumnilomCtrlThdInstanceState | read-only | current | The state of the instance. |
| 1.3.6.1.4.1.42.2.175.102.17.4.1.4 | ColumnilomCtrlThdInstanceAction | read-write | current | The control action for instance. |
| 1.3.6.1.4.1.42.2.175.102.18 | NodeilomCtrlConformances | |||
| 1.3.6.1.4.1.42.2.175.102.18.1 | NodeilomCtrlCompliances | |||
| 1.3.6.1.4.1.42.2.175.102.18.2 | NodeilomCtrlGroups | |||
| 1.3.6.1.4.1.42.2.175.102.18.2.1 | GroupilomCtrlDeprecatedObjectsGroup | deprecated | The objects that have been deprecated. | |
| 1.3.6.1.4.1.42.2.175.102.18.2.2 | GroupilomCtrlObjectsGroup | current | The group of current objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ILOMCtrlAlertSNMPVersion | INTEGER { v1(1), v2c(2), v3(3) } | current | An enumeration of the possible SNMP versions for traps generated by configuring alert rules. |
| ILOMCtrlAlertType | INTEGER { email(1), snmptrap(2), ipmipet(3) } | current | An enumerated value which describes the possible alert notification types. |
| ILOMCtrlBackupAndRestoreAction | INTEGER { backup(1), restore(2) } | current | An action to start Backup or Restore operation. |
| ILOMCtrlBaudRate | INTEGER { baud9600(1), baud19200(2), baud38400(3), baud57600(4), baud115200(5) } | current | An enumerated value which describes the possible baud rates for serial ports. |
| ILOMCtrlEventLogClass | INTEGER { audit(1), ipmi(2), chassis(3), fma(4), system(5), pcm(6), other(7) } | current | An enumerated value which describes the possible event log class. |
| ILOMCtrlEventLogType | INTEGER { log(1), action(2), fault(3), state(4), repair(5), other(6) } | current | An enumerated value which describes the possible event log type. |
| ILOMCtrlEventSeverity | INTEGER { disable(1), critical(2), major(3), minor(4), down(5), other(6) } | current | An enumerated value which describes the possible event severities. |
| ILOMCtrlFirmwareUpdateAction | INTEGER { clearProperties(1), initiate(2) } | current | An enumerated value which contains all the possible firmware management actions. |
| ILOMCtrlFirmwareUpdateStatus | INTEGER { tftpError(1), imageVerificationFailed(2), inProgress(3), success(4), other(5) } | current | An enumerated value which contains all the possible status values during a firmware update. |
| ILOMCtrlFlowControl | INTEGER { unknown(1), hardware(2), software(3), none(4) } | current | An enumerated value which describes the possible flowcontrol settings for serial ports. |
| ILOMCtrlInstanceTargetIndex | OCTET STRING (SIZE (0..100)) | current | A string that is short enough to be used properly along with ILOMCtrlModTargetIndex as a pair of indexes without overflowing the maximum number of subOIDs. |
| ILOMCtrlLocalUserAuthCLIMode | INTEGER { default(1), alom(2) } | current | An enumerated value which describes the possible CLI modes. The 'default' mode corresponds to the ILOM DMTF CLP. The 'alom' mode corresponds to the ALOM CMT. |
| ILOMCtrlLocalUserPassword | OCTET STRING (SIZE (8..16)) | current | A local user password. |
| ILOMCtrlLocalUserUsername | OCTET STRING (SIZE (4..16)) | current | A local user username. This must start with an alphabetical letter and may contain alphabetical letters, digits, hyphens and underscores. This can not be 'password'. This can not contain spaces. |
| ILOMCtrlModTargetIndex | OCTET STRING (SIZE (0..12)) | current | A string that is short enough to be used properly along with ILOMCtrlInstanceTargetIndex as a pair of indexes without overflowing the maximum number of subOIDs. |
| ILOMCtrlNetworkIpDiscovery | INTEGER { static(1), dynamic(2), other(3) } | current | An enumerated value which determines whether the IP settings should static or dynamic (DHCP). |
| ILOMCtrlPowerAction | INTEGER { powerOn(1), powerOff(2), powerCycle(3), powerSoft(4) } | current | An enumerated value which describes possible actions that can applied to a power control target. |
| ILOMCtrlRedundancyAction | INTEGER { ready(1), initiateFailover(2) } | current | Setting the redundancy action to initiateFailover will cause the current SC to switch mastership. i.e., it will initiate actions to become master if it is standby or to become standby if it is master. No action is taken… |
| ILOMCtrlRedundancyStatus | INTEGER { initializing(1), active(2), standby(3), standAlone(4), other(5) } | current | An enumerated value which contains all the possible states a device can have in a redundant configuration. |
| ILOMCtrlResetAction | INTEGER { reset(1), resetNonMaskableInterrupt(2), force(3) } | current | An enumerated value which describes possible actions that can applied to a reset control target. |
| ILOMCtrlResetToDefaultsAction | INTEGER { none(1), all(2), factory(3) } | current | An enumerated value indicating possible actions for resetting the SP back to factory defaults. |
| ILOMCtrlSessionsConnectionType | INTEGER { shell(1), web(2), other(3), snmp(4) } | current | An enumerated value which describes possible connection types by which a user can be log in. |
| ILOMCtrlSPARCBootModeState | INTEGER { normal(1), resetNvram(2) } | current | An enumerated value which contains all the possible states for the boot mode state. |
| ILOMCtrlSPARCDiagsAction | INTEGER { stop(1), start(2) } | current | An action to take to control POST running on the host. |
| ILOMCtrlSPARCDiagsLevel | INTEGER { min(1), max(2), advsettings(3) } | deprecated | An enumerated value which contains all the possible states for embedded diagnostics for the host. The min value is the same as the 'enabled' value on some platforms and the max value is the same as the 'extended' value.… |
| ILOMCtrlSPARCDiagsLevelAdv | INTEGER { init(1), minimum(2), normal(3), maximum(4), other(5) } | current | An enumerated value which contains all the possible states for embedded diagnostics for the host. The min value is the same as the 'enabled' value on some platforms and the max value is the same as the 'extended' value. |
| ILOMCtrlSPARCDiagsMode | INTEGER { off(1), normal(2), service(3), unknown(4) } | current | An enumerated value which contains all the possible OPS modes specified to POST. |
| ILOMCtrlSPARCDiagsTrigger | INTEGER { allResets(1), none(2), userReset(3), powerOnReset(4), errorTest(5), userResetandpowerOnReset(6), userResetanderrorTest(7), userTestandpowerOnReset(8), hwChange(9), hwChangeandpowerOnReset(10), hwChangeanderrorTest(11) } | current | An enumerated value which contains all the possible states for the trigger for embedded diagnostics on the host. x64 platforms with embedded diagnostics only support 'all-resets' and 'none' as possible states. |
| ILOMCtrlSPARCDiagsVerbosity | INTEGER { min(1), max(2), advsettings(3) } | deprecated | An enumerated value which contains all the possible states for the verbosity level for embedded diagnostics on the host. ***NOTE: this textual-convention is deprecated and replaced with ILOMCtrlSPARCDiagsVerbosityAdv. |
| ILOMCtrlSPARCDiagsVerbosityAdv | INTEGER { none(1), minimum(2), normal(3), maximum(4), debug(5) } | current | An enumerated value which contains all the possible states for the verbosity level for embedded diagnostics on the host. |
| ILOMCtrlSPARCHostAutoRestartPolicy | INTEGER { none(1), reset(2), dumpcore(3) } | current | An enumerated value which contains all the possible actions to perform when the SP determines that the host has hung. |
| ILOMCtrlSPARCHostBootFailRecovery | INTEGER { none(1), powercycle(2), poweroff(3) } | current | An enumerated value which contains all the possible actions to perform when the max boot failures allowed is reached. |
| ILOMCtrlSPARCHostBootRestart | INTEGER { none(1), reset(2) } | current | An enumerated value which contains all the possible actions to perform when the boot timer expires. |
| ILOMCtrlSPARCHostIoReconfigurePolicy | INTEGER { false(1), nextboot(2), true(3) } | current | An enumerated value which contains all the possible states for the host IO reconfiguration policy that is applied at next host power-on. |
| ILOMCtrlSPARCHostSendBreakAction | INTEGER { nop(1), break(2), dumpcore(3) } | current | Send Break Action to Host. |
| ILOMCtrlSPARCKeySwitchState | INTEGER { normal(1), standby(2), diag(3), locked(4) } | current | An enumerated value which contains all the possible states for the key switch. |
| ILOMCtrlSshKeyGenType | INTEGER { none(1), rsa(2), dsa(3) } | current | An enumerated value which contains all the possible key types for ssh. |
| ILOMCtrlTargetIndex | OCTET STRING (SIZE (0..110)) | current | A string that is short enough to be used properly as an index without overflowing the maximum number of subOIDs. |
| ILOMCtrlThdAction | INTEGER { suspend(1), resume(2), nop(3) } | current | An enumerated value which contains all the possible control actions for a THD module. |
| ILOMCtrlUserRole | INTEGER { administrator(1), operator(2), none(3), other(4) } | deprecated | An enumerated value which describes possible privilege levels (also known as roles) a user can have. ***NOTE: this textual-convention is deprecated and replaced by ILOMCtrlUserRoles. |
| ILOMCtrlUserRoles | OCTET STRING (SIZE (0..13)) | current | A set of role-IDs which describe the possible privilege levels (also known as roles) for a user. This property supports the legacy roles of 'Administrator' or 'Operator', or any of the individual role ID combinations of… |