SUPERMICRO-CHASSIS-MIB
32 objects
ISS Chassis MIB
Imported Objects
| IANAifType-MIB | IANAifType |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.100 | IdentitymbsmIssGroup | ISS Chassis MIB | ||
| 1.3.6.1.4.1.10876.101.1.100.1 | NodembsmIssScalarGroup | |||
| 1.3.6.1.4.1.10876.101.1.100.1.1 | ScalarmbsmMaxNumOfLCSlots | read-write | current | Maximum number of Line cards slots present in the Chassis system. After modifying this, switch should be restarted. |
| 1.3.6.1.4.1.10876.101.1.100.1.2 | ScalarmbsmMaxNumOfSlots | read-write | current | Maximum number of slots present in the Chassis system. After modifying this, switch should be restarted. |
| 1.3.6.1.4.1.10876.101.1.100.1.3 | ScalarmbsmMaxNumOfPortsPerLC | read-write | current | Maximum number of ports that can exist in a Line card. After modifying this, switch should be restarted. |
| 1.3.6.1.4.1.10876.101.1.100.1.4 | ScalarmbsmLoadSharingFlag | read-write | current | Flag to enable/disable Load-Sharing. This flag can set/reset at anytime. But, Load-sharing happens only when there are 2 control cards |
| 1.3.6.1.4.1.10876.101.1.100.2 | TablembsmSlotModuleMapTable | not-accessible | current | This table has the details of slot versus module information. After configuring all the entries in this table, switch must be restarted. |
| 1.3.6.1.4.1.10876.101.1.100.2.1 | RowmbsmSlotModuleMapEntry | not-accessible | current | Information about the module type for a particular slot. |
| 1.3.6.1.4.1.10876.101.1.100.2.1.1 | ColumnmbsmSlotId | not-accessible | current | Slot Id of the chassis for which the configuration in this entry applies. |
| 1.3.6.1.4.1.10876.101.1.100.2.1.2 | ColumnmbsmSlotModuleType | read-create | current | Specifies the type of the card to be contained in a specific slot |
| 1.3.6.1.4.1.10876.101.1.100.2.1.3 | ColumnmbsmSlotModuleStatus | read-create | current | This object is used to create and delete rows in the mbsmSlotModuleMapTable. |
| 1.3.6.1.4.1.10876.101.1.100.3 | TablembsmLCTypeTable | not-accessible | current | This table contains different Line card Types supported in the chassis system.. |
| 1.3.6.1.4.1.10876.101.1.100.3.1 | RowmbsmLCTypeEntry | not-accessible | current | An entry appears in this table for each Line card type supported in the chassis system.interface in the system. |
| 1.3.6.1.4.1.10876.101.1.100.3.1.1 | ColumnmbsmLCIndex | not-accessible | current | A unique value, greater than zero, for each Line card type supported in the chassis system. |
| 1.3.6.1.4.1.10876.101.1.100.3.1.2 | ColumnmbsmLCName | read-create | current | Name of the Line card for this entry. |
| 1.3.6.1.4.1.10876.101.1.100.3.1.3 | ColumnmbsmLCMaxPorts | read-create | current | Maximum number of ports available in this Line card. This value should be less than or equal to mbsmMaxNumOfPortsPerLC |
| 1.3.6.1.4.1.10876.101.1.100.3.1.4 | ColumnmbsmLCRowStatus | read-create | current | This object is used to create and delete rows in the mbsmLCTypeTable. |
| 1.3.6.1.4.1.10876.101.1.100.4 | TablembsmLCPortInfoTable | not-accessible | current | Information about ports of a Line card type. |
| 1.3.6.1.4.1.10876.101.1.100.4.1 | RowmbsmLCPortInfoEntry | not-accessible | current | An entry appears in this table for each port in a Line card. |
| 1.3.6.1.4.1.10876.101.1.100.4.1.1 | ColumnmbsmLCPortIndex | not-accessible | current | Port Index with respect to this line card |
| 1.3.6.1.4.1.10876.101.1.100.4.1.2 | ColumnmbsmLCPortIfType | read-write | current | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.10876.101.1.100.4.1.3 | ColumnmbsmLCPortSpeed | read-write | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.10876.101.1.100.4.1.4 | ColumnmbsmLCPortHighSpeed | read-write | current | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface i… |
| 1.3.6.1.4.1.10876.101.1.100.5 | TablembsmLCConfigTable | not-accessible | current | Table containing the details of the Line card types on Line card slots |
| 1.3.6.1.4.1.10876.101.1.100.5.1 | RowmbsmLCConfigEntry | not-accessible | current | An entry appears in this table for each physical interface in the switch. |
| 1.3.6.1.4.1.10876.101.1.100.5.1.1 | ColumnmbsmLCConfigSlotId | not-accessible | current | Slot Id of the chassis for which the configuration entry applies. |
| 1.3.6.1.4.1.10876.101.1.100.5.1.2 | ColumnmbsmLCConfigCardName | read-create | current | Name of the Line card. There should be an entry in the mbsmLCTypeTable |
| 1.3.6.1.4.1.10876.101.1.100.5.1.3 | ColumnmbsmLCConfigStatus | read-create | current | This object is used to create and delete rows in the mbsmLCConfigTable. |
| 1.3.6.1.4.1.10876.101.1.100.6 | NodembsmIssTrapGroup | |||
| 1.3.6.1.4.1.10876.101.1.100.6.1 | NotificationmbsmConfigErrTrap | current | Generated when any of the configuration results in a critical failure | |
| 1.3.6.1.4.1.10876.101.1.100.6.2 | NotificationmbsmCardInsertedTrap | current | Generated when a card is inserted in a slot | |
| 1.3.6.1.4.1.10876.101.1.100.6.3 | NotificationmbsmCardRemovedTrap | current | Generated when a card is removed from a slot |