SUPERMICRO-DHCP-RLY-MIB
29 objects
The Dhcp Relay agent MIB
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.24 | IdentityfutureDhcpRelay | The Dhcp Relay agent MIB | ||
| 1.3.6.1.4.1.10876.101.1.24.1 | NodedhcpRelay | |||
| 1.3.6.1.4.1.10876.101.1.24.1.1 | ScalardhcpRelaying | read-write | current | Only when enabled, the Relay Agent shall become active. |
| 1.3.6.1.4.1.10876.101.1.24.1.2 | ScalardhcpRelayServersOnly | read-write | current | When enabled, the Relay Agent shall forward the packets from the client to a specific DHCP server. |
| 1.3.6.1.4.1.10876.101.1.24.1.3 | ScalardhcpRelaySecsThreshold | read-write | current | IF the secs field in the DHCP message is greater than the dhcpRelaySecsThreshold, Packet get dropped at the Relay Agent |
| 1.3.6.1.4.1.10876.101.1.24.1.4 | ScalardhcpRelayHopsThreshold | read-write | current | A maximum hop count,a relay agent allow to pass through it.If the HopCount in the Dhcp Message is greater than the dhcpRelayHopsThreshold, Packet get dropped a… |
| 1.3.6.1.4.1.10876.101.1.24.1.5 | ScalardhcpRelayRAIOptionControl | read-write | current | Only when enabled, the Relay Agent shall do any processing related to Relay Agent Information Options - like inserting the necessary options while relaying a p… |
| 1.3.6.1.4.1.10876.101.1.24.1.6 | ScalardhcpRelayRAICircuitIDSubOptionControl | read-write | current | When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the CircuitID sub-option, when necessary, while relaying packets from a c… |
| 1.3.6.1.4.1.10876.101.1.24.1.7 | ScalardhcpRelayRAIRemoteIDSubOptionControl | read-write | current | When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the RemoteID sub-option, when necessary, while relaying packets from a cl… |
| 1.3.6.1.4.1.10876.101.1.24.1.8 | ScalardhcpRelayRAISubnetMaskSubOptionControl | read-write | current | When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the Subnet Mask sub-option, when necessary, while relaying packets from a… |
| 1.3.6.1.4.1.10876.101.1.24.1.9 | ScalardhcpRelayRAIOptionInserted | read-only | current | Number of packets in which the RelayAgent inserted the RAIOption. |
| 1.3.6.1.4.1.10876.101.1.24.1.10 | ScalardhcpRelayRAICircuitIDSubOptionInserted | read-only | current | Number of packets in which the RelayAgent inserted the CircuitID SubOption. |
| 1.3.6.1.4.1.10876.101.1.24.1.11 | ScalardhcpRelayRAIRemoteIDSubOptionInserted | read-only | current | Number of packets in which the RelayAgent inserted the RemoteID SubOption. |
| 1.3.6.1.4.1.10876.101.1.24.1.12 | ScalardhcpRelayRAISubnetMaskSubOptionInserted | read-only | current | Number of packets in which the RelayAgent inserted the SubnetMask SubOption. |
| 1.3.6.1.4.1.10876.101.1.24.1.13 | ScalardhcpRelayRAIOptionWronglySet | read-only | current | Number of packets dropped by the Relay Agent because the giaddr field is not set but the RAI option exists in the packet. |
| 1.3.6.1.4.1.10876.101.1.24.1.14 | ScalardhcpRelayRAISpaceConstraint | read-only | current | Number of packets in which the RAI Option wasnot inserted by the Relay Agent because if inserted the packetsize shall exceed the MTU. |
| 1.3.6.1.4.1.10876.101.1.24.1.15 | ScalardhcpConfigTraceLevel | read-write | current | The Trace level Object which has bit masks for various levels of tracing |
| 1.3.6.1.4.1.10876.101.1.24.1.16 | ScalardhcpConfigDhcpCircuitOption | read-write | current | This Object defines the type of information to be present in circuit id sub-option.And this option can specfied only if CircuitIDSubOptionControl is enabled.It… |
| 1.3.6.1.4.1.10876.101.1.24.1.17 | ScalardhcpRelayCounterReset | read-write | current | This object is used to reset the statistics counters. When set to set(1), statistics counters will be cleared. When set to notset(2), no action will take place. |
| 1.3.6.1.4.1.10876.101.1.24.2 | NodedhcpRelayTable | |||
| 1.3.6.1.4.1.10876.101.1.24.2.1 | TabledhcpRelaySrvAddressTable | not-accessible | current | This table contains the IP addresses of the DHCP Server to which the Relay Agent needs to forward the packets from the client. This object becomes active only … |
| 1.3.6.1.4.1.10876.101.1.24.2.1.1 | RowdhcpRelaySrvAddressEntry | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.1.24.2.1.1.1 | ColumndhcpRelaySrvIpAddress | not-accessible | current | The IP Address of the DHCP server. |
| 1.3.6.1.4.1.10876.101.1.24.2.1.1.2 | ColumndhcpRelaySrvAddressRowStatus | read-write | current | RowStatus of this entry. |
| 1.3.6.1.4.1.10876.101.1.24.2.2 | TabledhcpRelayIfTable | not-accessible | current | This table holds the circuit id SubOption configured over the interface.This option will be inserted for dhcp request packets received on this interface based … |
| 1.3.6.1.4.1.10876.101.1.24.2.2.1 | RowdhcpRelayIfEntry | not-accessible | current | Contains configured dhcp relay information suboptions |
| 1.3.6.1.4.1.10876.101.1.24.2.2.1.1 | ColumndhcpRelayIfCircuitId | read-write | current | Circuit Id value configured over this interface.Configuring with zero value will reset the circuit id configuration for this interface.Circuit id will be inser… |
| 1.3.6.1.4.1.10876.101.1.24.2.2.1.2 | ColumndhcpRelayIfRemoteId | read-write | current | Remote Id value configured over this interface.String of length zero will reset the configuration.Configuring with <MGMT_IP_ADDR> string will replace the remot… |
| 1.3.6.1.4.1.10876.101.1.24.2.2.1.3 | ColumndhcpRelayIfRowStatus | read-write | current | Row status of this table |