SUPERMICRO-G8261TS-MIB
19 objects
This is the proprietary MIB for Delay.
Imported Objects
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.72 | IdentityfsG8261Ts | This is the proprietary MIB for Delay. | ||
| 1.3.6.1.4.1.10876.101.2.72.1 | NodefsG8261TsSystem | |||
| 1.3.6.1.4.1.10876.101.2.72.1.1 | ScalarfsG8261TsModuleStatus | read-write | current | Module status for G8261TestSimulator module. G8261 test simulator is functional only when the module status is set as enabled |
| 1.3.6.1.4.1.10876.101.2.72.2 | NodefsG8261TsParams | |||
| 1.3.6.1.4.1.10876.101.2.72.2.1 | TablefsG8261TsParamsTable | not-accessible | current | A table containing the configurable parameters of the delay module. The table contains an entry per direction (forward/reverse) |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1 | RowfsG8261TsParamsEntry | not-accessible | current | A list of objects that determine the delay to be introduced. |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.1 | ColumnfsG8261TsDirection | not-accessible | current | Direction on which the network disturbance to be introduced |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.2 | ColumnfsG8261TsSwitchCount | read-write | current | No. of switches through which the packet should pass through in the direction specified by fsG8261TsDirection. |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.3 | ColumnfsG8261TsPacketSize | read-write | current | The size of the largest packet to be sent on the network, specified in octets. |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.4 | ColumnfsG8261TsLoad | read-write | current | Percentage of load or no. of packets of size specified by fsG8261TsPacketSize to be transmitted for a duration specified by fsG8261TsDuration. |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.5 | ColumnfsG8261TsNetworkDisturbance | read-write | current | Percentage of noise to be introduced in the network. |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.6 | ColumnfsG8261TsDuration | read-write | current | Duration for which network disturbance/load should be applied. The units of duration is in seconds. |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.7 | ColumnfsG8261TsFlowVariationFactor | read-write | current | Flow variation factor with which the load/noise should be introduced. Noise/load can be introduced either as a constant flow or it can applied as any of the fo… |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.8 | ColumnfsG8261TsFlowInterval | read-write | current | Interval in seconds till when the flow is applied. |
| 1.3.6.1.4.1.10876.101.2.72.2.1.1.9 | ColumnfsG8261TsFrequency | read-write | current | Frequency at which the load specified by fsG8261TsLoad is applied on the network. |
| 1.3.6.1.4.1.10876.101.2.72.3 | NodefsG8261TsOutput | |||
| 1.3.6.1.4.1.10876.101.2.72.3.1 | ScalarfsG8261TsMeanVariance | read-only | current | This is the current value of the mean propagation time scalenanoseconds between a master and a slave as computed by the slave. The time interval field represen… |
| 1.3.6.1.4.1.10876.101.2.72.3.2 | ScalarfsG8261TsAccuracy | read-only | current | This is the current value of the time difference scalednanoseconds between a master and a slave as computed by the slave. The time interval field represents th… |
| 1.3.6.1.4.1.10876.101.2.72.3.3 | ScalarfsG8261TsDelay | read-only | current | The total delay introduced by the G8261TS module in terms of nano seconds with the delay params configured. |