SUPERMICRO-L2VPN-MIB
122 objects
All rights reserved
Imported Objects
| INET-ADDRESS-MIB | -- RFC3411 InetAddress InetAddressType |
| MPLS-TC-STD-MIB | -- RFC4001 MplsLdpIdentifier -- RFC5542 MplsLsrIdentifier |
| PW-STD-MIB | -- RFC3811 pwIndex |
| PW-TC-STD-MIB | -- RFC3811 PwIndexOrZeroType PwGroupID PwIDType PwOperStatusTC |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | -- RFC2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2578 DisplayString RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.72 | IdentityfsL2VpnMIB | All rights reserved | ||
| 1.3.6.1.4.1.10876.101.2.72.0 | NodevplsNotifications | |||
| 1.3.6.1.4.1.10876.101.2.72.0.1 | NotificationvplsStatusChanged | current | The vplsStatusChanged notification is generated when there is a change in the administrative or operating status of a VPLS service. | |
| 1.3.6.1.4.1.10876.101.2.72.0.2 | NotificationvplsFwdFullAlarmRaised | current | The vplsFwdFullAlarmRaised notification is generated when the utilization of the Forwarding database is above the value specified by vplsConfigFwdFullHighWater… | |
| 1.3.6.1.4.1.10876.101.2.72.0.3 | NotificationvplsFwdFullAlarmCleared | current | The vplsFwdFullAlarmCleared notification is generated when the utilization of the Forwarding database is below the value specified by vplsConfigFwdFullLowWater… | |
| 1.3.6.1.4.1.10876.101.2.72.1 | NodevplsObjects | |||
| 1.3.6.1.4.1.10876.101.2.72.1.1 | ScalarvplsConfigIndexNext | read-only | current | This object contains an appropriate value to be used for vplsConfigIndex when creating entries in the vplsConfigTable. The value 0 indicates that no unassigned… |
| 1.3.6.1.4.1.10876.101.2.72.1.2 | TablevplsConfigTable | not-accessible | current | This table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS). |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1 | RowvplsConfigEntry | not-accessible | current | A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VP… |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.1 | ColumnvplsConfigIndex | not-accessible | current | Unique index for the conceptual row identifying a VPLS service. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.2 | ColumnvplsConfigName | read-create | current | A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.3 | ColumnvplsConfigDescr | read-create | current | A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length o… |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.4 | ColumnvplsConfigAdminStatus | read-create | current | The desired administrative state of the VPLS service. If the administrative status of the Vpls service is changed to enable then this service is able to utiliz… |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.6 | ColumnvplsConfigMacLearning | read-create | current | This object specifies if MAC Learning is enabled in this service. If this object is true then Mac Learning is enabled. If false, then Mac Learning is disabled. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.7 | ColumnvplsConfigDiscardUnknownDest | read-create | current | If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are proces… |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.8 | ColumnvplsConfigMacAging | read-create | current | If the value of this object is 'true' then the MAC ageing process is enabled in this VPLS. If 'false', then the MAC ageing process is disabled |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.10 | ColumnvplsConfigFwdFullHighWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.11 | ColumnvplsConfigFwdFullLowWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.12 | ColumnvplsConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.13 | ColumnvplsConfigMtu | read-create | current | The value of this object specifies the MTU of this vpls instance. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.14 | ColumnvplsConfigVpnId | read-only | current | This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.15 | ColumnvplsConfigServiceType | read-create | current | The value of this object specifies the type of service emulated by this vpls instance. |
| 1.3.6.1.4.1.10876.101.2.72.1.2.1.16 | ColumnvplsConfigStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.4.1.10876.101.2.72.1.3 | TablevplsStatusTable | not-accessible | current | This table provides information for monitoring Virtual Private Lan Services(VPLS). |
| 1.3.6.1.4.1.10876.101.2.72.1.3.1 | RowvplsStatusEntry | not-accessible | current | A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VP… |
| 1.3.6.1.4.1.10876.101.2.72.1.3.1.1 | ColumnvplsStatusOperStatus | read-only | current | The current operational state of this VPLS Service. |
| 1.3.6.1.4.1.10876.101.2.72.1.3.1.2 | ColumnvplsStatusPeerCount | read-only | current | This objects specifies the number of peers present in this vpls instance. |
| 1.3.6.1.4.1.10876.101.2.72.1.4 | TablevplsPwBindTable | not-accessible | current | This table provides an association between a VPLS service and the corresponding Pseudo Wires. A service can have more than one Pseudo Wire association. Pseudo … |
| 1.3.6.1.4.1.10876.101.2.72.1.4.1 | RowvplsPwBindEntry | not-accessible | current | Each row represents an association between a VPLS instance and one or more Pseudo Wires defined in the pwTable. Each index is unique in describing an entry in … |
| 1.3.6.1.4.1.10876.101.2.72.1.4.1.1 | ColumnvplsPwBindConfigType | read-create | current | The value of this object indicates whether the Pseudo Wire binding was created manually or via autodiscovery. The value of this object must be specifed when th… |
| 1.3.6.1.4.1.10876.101.2.72.1.4.1.2 | ColumnvplsPwBindType | read-create | current | The value of this object indicates whether the Pseudo Wire binding is of type mesh or spoke. The value of this object must be specifed when the row is created … |
| 1.3.6.1.4.1.10876.101.2.72.1.4.1.3 | ColumnvplsPwBindRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state |
| 1.3.6.1.4.1.10876.101.2.72.1.4.1.4 | ColumnvplsPwBindStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.4.1.10876.101.2.72.1.5 | TablevplsBgpADConfigTable | not-accessible | current | This table specifies information for configuring BGP Auto-discovery parameters for a given Vpls service. |
| 1.3.6.1.4.1.10876.101.2.72.1.5.1 | RowvplsBgpADConfigEntry | not-accessible | current | A row in this table represents BGP based autodiscovery is in use for this instance of Vpls. A row in this table is indexed by vplsConfigIndex, which uniquely i… |
| 1.3.6.1.4.1.10876.101.2.72.1.5.1.1 | ColumnvplsBgpADConfigRouteDistinguisher | read-create | current | The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. for more details on use of a route distinguisher for a… |
| 1.3.6.1.4.1.10876.101.2.72.1.5.1.2 | ColumnvplsBgpADConfigPrefix | read-create | current | In case of auto-discovery the default prefix advertised is the ip address of the loopback. In case the user wants to override the loopback address, vplsBgpADCo… |
| 1.3.6.1.4.1.10876.101.2.72.1.5.1.3 | ColumnvplsBgpADConfigVplsId | read-create | current | VplsId is a unique identifier for all VSIs belonging to the same VPLS. It is advertised as an extended community |
| 1.3.6.1.4.1.10876.101.2.72.1.5.1.4 | ColumnvplsBgpADConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.10876.101.2.72.1.6 | TablevplsBgpRteTargetTable | not-accessible | current | This table specifies the list of Route Targets imported or exported by BGP during auto-discovery of VPLS. |
| 1.3.6.1.4.1.10876.101.2.72.1.6.1 | RowvplsBgpRteTargetEntry | not-accessible | current | An entry in this table specifies the value of the Route Target being used by BGP. Depending on the value of vplsBgpRteTargetType an RT might be exported or imp… |
| 1.3.6.1.4.1.10876.101.2.72.1.6.1.1 | ColumnvplsBgpRteTargetIndex | not-accessible | current | This index along with vplsConfigIndex,identifies one entry in the vplsBgpRteTargetTable. By keeping vplsConfigIndex constant and using new value of vplsBgpRteT… |
| 1.3.6.1.4.1.10876.101.2.72.1.6.1.2 | ColumnvplsBgpRteTargetRTType | read-create | current | Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target,… |
| 1.3.6.1.4.1.10876.101.2.72.1.6.1.3 | ColumnvplsBgpRteTargetRT | read-create | current | The route target associated with the VPLS service. For more details on use of route targets for a VPLS service, see [RFC4761] |
| 1.3.6.1.4.1.10876.101.2.72.1.6.1.4 | ColumnvplsBgpRteTargetRTRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |
| 1.3.6.1.4.1.10876.101.2.72.1.7 | ScalarvplsStatusNotifEnable | read-write | current | If this object is set to true(1), then it enables the emission of vplsStatusChanged notification; otherwise this notification is not emitted. |
| 1.3.6.1.4.1.10876.101.2.72.1.8 | ScalarvplsNotificationMaxRate | read-write | current | This object indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these not… |
| 1.3.6.1.4.1.10876.101.2.72.2 | NodevplsConformance | |||
| 1.3.6.1.4.1.10876.101.2.72.2.1 | NodevplsCompliances | |||
| 1.3.6.1.4.1.10876.101.2.72.2.1.1 | CompliancevplsModuleFullCompliance | current | Compliance requirement for implementations that provide full support for VPLS-GENERIC-DRAFT-01-MIB. Such devices can then be monitored and configured using thi… | |
| 1.3.6.1.4.1.10876.101.2.72.2.1.2 | CompliancevplsModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for VPLS-GENERIC-DRAFT-01-MIB. Such devices can then be monitored but cannot be … |
| 1.3.6.1.4.1.10876.101.2.72.2.2 | NodevplsGroups | |||
| 1.3.6.1.4.1.10876.101.2.72.2.2.1 | GroupvplsGroup | current | The group of objects supporting management of L2VPN VPLS services | |
| 1.3.6.1.4.1.10876.101.2.72.2.2.2 | GroupvplsPwBindGroup | current | The group of objects supporting management of Pseudo Wire (PW) Binding to VPLS. | |
| 1.3.6.1.4.1.10876.101.2.72.2.2.3 | GroupvplsNotificationGroup | current | The group of notifications supporting the Notifications generated for VPLS Services | |
| 1.3.6.1.4.1.10876.101.2.72.3 | NodepwRedundancyScalar | |||
| 1.3.6.1.4.1.10876.101.2.72.3.1 | ScalarfsL2VpnPwRedundancyStatus | read-write | current | This object is for enabling or disabling the pseudowire redundancy feature. User can disable the pseudowire redundancy if the Peer PE node does not support pse… |
| 1.3.6.1.4.1.10876.101.2.72.3.2 | ScalarfsL2VpnPwRedNegotiationTimeOut | read-write | current | MAXIMUM permissible time allowed to negotiate the FORWARDING/ SWITCHOVER status with peer PEs. After expiry of this time operator notification will be triggere… |
| 1.3.6.1.4.1.10876.101.2.72.3.3 | ScalarfsL2VpnPwRedundancySyncFailNotifyEnable | read-write | current | Enable notification for PW FORWARDING/SWITCHOVER status negotiation failures. |
| 1.3.6.1.4.1.10876.101.2.72.3.4 | ScalarfsL2VpnPwRedundancyPwStatusNotifyEnable | read-write | current | Notify PW_STATUS change (AC_FAULT, PSN_FAULT, FORWARDING, SWITCHOVER). |
| 1.3.6.1.4.1.10876.101.2.72.4 | NodepwRedundancyObjects | |||
| 1.3.6.1.4.1.10876.101.2.72.4.0 | NodefsL2VpnPwRedTraps | |||
| 1.3.6.1.4.1.10876.101.2.72.4.0.1 | NotificationfsL2VpnPwRedSyncFail | current | This notification is generated when the PW FORWARDING/SWITCHOVER status negotiation has exceeded the configured fsL2VpnPwRedNegotiationTimeOut on a PW Redundan… | |
| 1.3.6.1.4.1.10876.101.2.72.4.0.2 | NotificationfsL2VpnPwRedPwStatus | current | This notification is generated when the PW status changes for a PW in a redundancy group. | |
| 1.3.6.1.4.1.10876.101.2.72.4.1 | TablefsL2VpnPwRedGroupTable | not-accessible | current | The PW Redundancy Group table for pseudo-wire. Each entry in this table corresponds to a configured Redundancy Group. This table contains the group specific at… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1 | RowfsL2VpnPwRedGroupEntry | not-accessible | current | The PW Redundancy Group table entry. This table allows the user to configure the Redundancy Group related parameters. Once the redundancy entries are created t… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.1 | ColumnfsL2VpnPwRedGroupIndex | not-accessible | current | The unique identifier for the pseudowire redundancy protection group. |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.2 | ColumnfsL2VpnPwRedGroupProtType | read-create | current | This object is used to indicate the protection architecture type of the redundancy group. Protection architecture types supported are give below: - 'onePlusOne… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.3 | ColumnfsL2VpnPwRedGroupReversionType | read-create | current | This object is used to indicate the operation type/mode of the protection group entry. If the value is set to 'revertive(1)', then normal traffic will be shift… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.4 | ColumnfsL2VpnPwRedGroupContentionResolutionMethod | read-create | current | This object is used to indicate the mode of operation of the pseudo-wire group. If the mode is configured as independent then the PW endpoint nodes independent… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.5 | ColumnfsL2VpnPwRedGroupMasterSlaveMode | read-create | current | This value is applicable only if the fsL2VpnPwRedGroupContentionResolutionMethod is selected as 'masterSlave'. Then the user can specify if this group is actin… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.6 | ColumnfsL2VpnPwRedGroupDualHomeApps | read-create | current | Enables the reflection of the attachment circuit status onto both the primary and secondary pseudowires. This condition is necessary if the peer PEs are connec… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.7 | ColumnfsL2VpnPwRedGroupName | read-create | current | The name given to the protection group entry. This object is used to refer the protection group in addition to the protection group Id. The default value for t… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.8 | ColumnfsL2VpnPwRedGroupStatus | read-only | current | This parameter indicate the current status of the PW Redundancy Group. |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.9 | ColumnfsL2VpnPwRedGroupOperActivePw | read-only | current | This object is used for indicating the pseudo-wire which is currently active in a PW Redundancy Group. This parameter will contain reference to a valid pwEntry… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.10 | ColumnfsL2VpnPwRedGroupWtrTimer | read-create | current | This column is used to configure the wait-to-restore timer for the pseudowire redundancy group. This column is used to configure the wait-to-restore timer for … |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.11 | ColumnfsL2VpnPwRedGroupAdminCmd | read-write | current | This column is used by the operator to perform some administrative operation. The operator requests a command by writing the command value to this column.The a… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.12 | ColumnfsL2VpnPwRedGroupAdminActivePw | read-write | current | This object is used by the operator to forcefully switchover the traffic to the specified pseudowire. This operation may or may-not succeed depending on the re… |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.13 | ColumnfsL2VpnPwRedGroupAdminCmdStatus | read-only | current | This column indicates the status of the most recent administrative command issued to this protection group through the fsL2VpnPwRedGroupAdminCmd object. |
| 1.3.6.1.4.1.10876.101.2.72.4.1.1.14 | ColumnfsL2VpnPwRedGroupRowStatus | read-create | current | This object defines the status of this row. The valid option supported for this table are 'createAndGo' and 'destroy'.Entries in this table cannot be modified … |
| 1.3.6.1.4.1.10876.101.2.72.4.2 | TablefsL2VpnPwRedNodeTable | not-accessible | current | List of sibling PE nodes in PW Redundancy Group. For each node corresponding TLDP entity also has to be created in MPLS-LDP-STD-MIB::mplsLdpEntityTable. |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1 | RowfsL2VpnPwRedNodeEntry | not-accessible | current | Information about a sibling PE node participating the same PW Redundancy Group. |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1.1 | ColumnfsL2VpnPwRedNodeAddrType | not-accessible | current | The type of the internetwork layer address used for ICCP handshaking. This object indicates how the value of fsL2VpnPwRedNodeAddr is to be interpreted. This pa… |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1.2 | ColumnfsL2VpnPwRedNodeAddr | not-accessible | current | The value of the internetwork layer address used for the ICCP handshaking. The value of fsL2VpnPwRedNodeAddrType specifies how this address is to be interprete… |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1.3 | ColumnfsL2VpnPwRedNodeLocalLdpID | read-only | current | This read-only parameter indicates the currently used LDP session for ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable. |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1.4 | ColumnfsL2VpnPwRedNodeLocalLdpEntityIndex | read-only | current | This read-only parameter indicates the currently used LDP session for ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable. |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1.5 | ColumnfsL2VpnPwRedNodePeerLdpID | read-only | current | This read-only parameter indicates the currently used LDP session for ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable. |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1.6 | ColumnfsL2VpnPwRedNodeStatus | read-only | current | This read-only parameter indicates the sibling node status. |
| 1.3.6.1.4.1.10876.101.2.72.4.2.1.7 | ColumnfsL2VpnPwRedNodeRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.10876.101.2.72.4.3 | TablefsL2VpnPwRedPwTable | not-accessible | current | This tables gives the information of the pseudowires associated with a particular redundancy group and allows to modify/remove PWs in the group. The switching … |
| 1.3.6.1.4.1.10876.101.2.72.4.3.1 | RowfsL2VpnPwRedPwEntry | not-accessible | current | This tables allows the user to configure the pseudowire parameters specific to redundancy group. |
| 1.3.6.1.4.1.10876.101.2.72.4.3.1.1 | ColumnfsL2VpnPwRedPwIndex | not-accessible | current | The pwIndex of a PW in Redundancy group |
| 1.3.6.1.4.1.10876.101.2.72.4.3.1.2 | ColumnfsL2VpnPwRedPwPreferance | read-create | current | The preference of the pseudowire. If the pseudowire is configured as primary it has more chance of becoming active when more than one PW qualify for secondary |
| 1.3.6.1.4.1.10876.101.2.72.4.3.1.3 | ColumnfsL2VpnPwRedPwLocalStatus | read-only | current | The pwLocalStatus of the PW including the preferential FORWARDING and SWITCHOVER bit. |
| 1.3.6.1.4.1.10876.101.2.72.4.3.1.4 | ColumnfsL2VpnPwRedPwRemoteStatus | read-only | current | This object indicates the PFS bit status received from the remote peer via LDP signalling. |
| 1.3.6.1.4.1.10876.101.2.72.4.3.1.5 | ColumnfsL2VpnPwRedPwOperStatus | read-only | current | This object indicates the PW operational status with the Preferential Forwarding status under consideration. When PFS is indicates status as 'STANDBY' the OPER… |
| 1.3.6.1.4.1.10876.101.2.72.4.3.1.6 | ColumnfsL2VpnPwRedPwRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state |
| 1.3.6.1.4.1.10876.101.2.72.4.4 | TablefsL2VpnPwRedIccpPwTable | not-accessible | current | This tables gives the information of the pseudowires associated with a particular redundancy group and allows to modify/remove PWs in the group. The switching … |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1 | RowfsL2VpnPwRedIccpPwEntry | not-accessible | current | This tables allows the user to configure the pseudowire parameters specific to redundancy group. |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.1 | ColumnfsL2VpnPwRedIccpPwRgIndex | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.2 | ColumnfsL2VpnPwRedIccpPwHeadLsr | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.3 | ColumnfsL2VpnPwRedIccpPwFecType | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.4 | ColumnfsL2VpnPwRedIccpPwTailLsr | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.5 | ColumnfsL2VpnPwRedIccpPwGroup | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.6 | ColumnfsL2VpnPwRedIccpPwId | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.7 | ColumnfsL2VpnPwRedIccpPwAgiType | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.8 | ColumnfsL2VpnPwRedIccpPwAgi | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.9 | ColumnfsL2VpnPwRedIccpPwLocalAiiType | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.10 | ColumnfsL2VpnPwRedIccpPwLocalAii | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.11 | ColumnfsL2VpnPwRedIccpPwRemoteAiiType | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.12 | ColumnfsL2VpnPwRedIccpPwRemoteAii | not-accessible | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.13 | ColumnfsL2VpnPwRedIccpPwRoId | read-only | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.14 | ColumnfsL2VpnPwRedIccpPwPriority | read-only | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.4.1.15 | ColumnfsL2VpnPwRedIccpPwStatus | read-only | current | |
| 1.3.6.1.4.1.10876.101.2.72.4.5 | NodefsL2VpnPwRedTestObjects | |||
| 1.3.6.1.4.1.10876.101.2.72.4.5.1 | ScalarfsL2VpnPwRedSimulateFailure | read-write | current | This MIB object is added to trigger Invaid LDP-ICCP message 1. noRgIdTlv - Send a RG Application Data Message without RG ID TLV 2. invalidRgIdTlvLen - Send a R… |
| 1.3.6.1.4.1.10876.101.2.72.4.5.2 | ScalarfsL2VpnPwRedSimulateFailureForNbr | read-write | current | This MIB object is added to configure the Peer address to which the Inavlid packet to be transmitted |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FsL2VpnPwStatus | BITS { pwNotForwarding (0), servicePwRxFault (1), servicePwTxFault (2), psnPwRxFault (3), psnPwTxFault (4), pwForwardingStandby (5), pwSwitchoverRequest (6) } | current | Indicates the status of the PW and the interfaces affecting this PW. If none of the first 5 bits are set, it indicates no faults are reported. |
| VplsBgpRouteDistinguisher | OCTET STRING(SIZE (0..256)) | current | Syntax for a route distinguisher. For a complete definition of a route distinguisher, see [RFC4364]. For more details on use of a route distinguisher for a VPLS service, see [RFC4761] |
| VplsBgpRouteTarget | OCTET STRING(SIZE (0..256)) | current | Syntax for a route target. For a complete definition of a route target, see [RFC4364]. |
| VplsBgpRouteTargetType | INTEGER { import(1), export(2), both(3) } | current | Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]. |
| VPNIdOrZero | OCTET STRING (SIZE (0 | 7)) | current | This textual convention is an extension of the VPNId textual convention that defines a non-zero-length OCTET STRING to identify a physical entity. This extension permits the additional value of a zero-length OCTET STRIN… |