SUPERMICRO-LA-MIB
119 objects
The proprietary MIB module for LA.
Imported Objects
| IEEE8023-LAG-MIB | dot3adAggEntry dot3adAggPortEntry |
| IF-MIB | -- RFC3411 InterfaceIndex InterfaceIndexOrZero |
| Q-BRIDGE-MIB | PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.63 | Identityfsla | The proprietary MIB module for LA. | ||
| 1.3.6.1.4.1.10876.101.1.63.1 | NodefsLaSystem | |||
| 1.3.6.1.4.1.10876.101.1.63.1.1 | ScalarfsLaSystemControl | read-write | current | Start or shutdown Link Aggregation Module in the system When set as 'start',resources required by Link aggregation module are allocated & Link aggregation modu… |
| 1.3.6.1.4.1.10876.101.1.63.1.2 | ScalarfsLaStatus | read-write | current | Sets the Link Aggregation Module administrative status as enabled or disabled. The module can be enabled only when this object is set to 'enabled'. |
| 1.3.6.1.4.1.10876.101.1.63.1.3 | ScalarfsLaTraceOption | read-write | current | This object is used to enable Trace Statements in Link Aggregation Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four … |
| 1.3.6.1.4.1.10876.101.1.63.1.4 | ScalarfsLaMaxPortsPerPortChannel | read-only | current | This Object specifies the maximun number of ports that can attach to a port-channel |
| 1.3.6.1.4.1.10876.101.1.63.1.5 | ScalarfsLaMaxPortChannels | read-only | current | This Object specifies the maximum number of Port-channels Present in the system |
| 1.3.6.1.4.1.10876.101.1.63.1.6 | ScalarfsLaOperStatus | read-only | current | This read only objects gives actual status of the Link Aggregation Module (Operational status of module). When Module is enabled Link Aggregation protocol star… |
| 1.3.6.1.4.1.10876.101.1.63.1.7 | ScalarfsLaActorSystemID | read-write | current | A 6-octet read-write MAC address value used as a unique identifier for the System. |
| 1.3.6.1.4.1.10876.101.1.63.1.8 | ScalarfsLaNoPartnerIndep | read-write | current | When enabled, and if there is no remote partner information available in the system then the port-channel becomes operationally down and the member ports of th… |
| 1.3.6.1.4.1.10876.101.1.63.1.9 | ScalarfsLaAutoLAG | read-write | current | Enable or Disable Auto-LAG on a switch globally. |
| 1.3.6.1.4.1.10876.101.1.63.1.10 | ScalarfsLaMlagSystemID | read-write | current | A 6-octet read-write MAC address value that is used by AutoLAG to configure system address for each MLAG portal. |
| 1.3.6.1.4.1.10876.101.1.63.1.11 | ScalarfsLaMlagSystemNumber | read-write | current | A global read-write value that is used by AutoLAG to configure system number for each MLAG portal. |
| 1.3.6.1.4.1.10876.101.1.63.2 | NodefsLaPortChannel | |||
| 1.3.6.1.4.1.10876.101.1.63.2.1 | TablefsLaPortChannelTable | not-accessible | current | A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. Th… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1 | RowfsLaPortChannelEntry | not-accessible | current | There is one entry in this table for each created port-channel port |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.1 | ColumnfsLaPortChannelIfIndex | not-accessible | current | The ifIndex of the port-channel(Aggregator's interface index). |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.2 | ColumnfsLaPortChannelGroup | read-only | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.3 | ColumnfsLaPortChannelAdminMacAddress | read-write | deprecated | This object is used for configuring MacAddress that is to be used by the port-channel when fsLaPortChannelMacSelection is force. WARNING:The value configured s… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.4 | ColumnfsLaPortChannelMacSelection | read-write | deprecated | Indicates the MAC address selection method for for the port-channel. Dynamic - System will reserve certain MAC address for aggregators. These MAC address are d… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.5 | ColumnfsLaPortChannelMode | read-only | current | Current Operating Channel Mode of the port Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). … |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.6 | ColumnfsLaPortChannelPortCount | read-only | current | The number of ports actually configured to the port-channel |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.7 | ColumnfsLaPortChannelActivePortCount | read-only | current | This object will give the number of ports that are attached to the port-channel and actively carrying data traffic on the link. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.8 | ColumnfsLaPortChannelSelectionPolicy | read-write | current | Link selection policy to be used by the port-channel. Selection policy isid implies selection based on Service-instance and is applicable only in Provider Back… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.9 | ColumnfsLaPortChannelDefaultPortIndex | read-write | current | The ifIndex of the default port that gets attached to the aggregator. A value of 0 means there is no default port for this port-channel. If this object is set … |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.10 | ColumnfsLaPortChannelMaxPorts | read-write | current | This object specifies the maximun number of ports that can attach to a port-channel. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.11 | ColumnfsLaPortChannelSelectionPolicyBitList | read-write | current | This object is used to set the Link selection policy to be used by the port-channel. A FOUR BYTE integer is used for setting the selecting policy. Each BIT in … |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.12 | ColumnfsLaPortChannelDLAGDistributingPortIndex | read-write | current | This object is used to configure the distributing port on which D-LAG periodic-sync and D-LAG event-update messages will be sent/received for D-LAG internal co… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.13 | ColumnfsLaPortChannelDLAGSystemID | read-write | current | This object is used to configure the common System ID in D-LAG nodes to be used for communicating with the peer node when D-LAG status is enabled. Since all th… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.14 | ColumnfsLaPortChannelDLAGSystemPriority | read-write | current | This object is used for configuring common system priority in D-LAG nodes to be used for communicating with the peer node when D-LAG status is enabled. Since a… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.15 | ColumnfsLaPortChannelDLAGPeriodicSyncTime | read-write | current | This object is used to configure the D-LAG periodic sync timer used in Distributed Link Aggregation. Periodic sync timer is used to configure the transmission … |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.16 | ColumnfsLaPortChannelDLAGMSSelectionWaitTime | read-write | current | This object is used to configure the period for the master slave selection wait timer used in Distributed Link Aggregation. This object is applicable, only if … |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.17 | ColumnfsLaPortChannelDLAGRolePlayed | read-only | current | This object is used to hold the current role played by the device participating in Distributed LAG. This object is applicable, only if D-LAG status and D-LAG r… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.18 | ColumnfsLaPortChannelDLAGStatus | read-write | current | This object is used to enable or disable the D-LAG functionality. This object can be modified irrespective of whether corresponding port-channel is enabled/dis… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.19 | ColumnfsLaPortChannelDLAGRedundancy | read-write | current | This object is used to enable/disable the redundancy feature in D-LAG node. When D-LAG redundancy feature is enabled, master-slave-selection algorithm can be u… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.20 | ColumnfsLaPortChannelDLAGMaxKeepAliveCount | read-only | current | This read-only mib object is used to provide keep alive mechanism when D-LAG status is enabled. Each D-LAG node will have a Max Keep alive count and each D-LAG… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.21 | ColumnfsLaPortChannelDLAGPeriodicSyncPduTxCount | read-only | current | This object is used when Distributing feature is enabled in a node to hold the number of periodic-sync PDUs sent on the distributing port. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.22 | ColumnfsLaPortChannelDLAGPeriodicSyncPduRxCount | read-only | current | This object is used when Distributing feature is enabled in a node to hold the number of periodic-sync PDUs received on the distributing port. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.23 | ColumnfsLaPortChannelDLAGEventUpdatePduTxCount | read-only | current | This object is used when Distributing feature is enabled in a node to hold the number of event-update PDUs sent on the distributing port. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.24 | ColumnfsLaPortChannelDLAGEventUpdatePduRxCount | read-only | current | This object is used when Distributing feature is enabled in a node to hold the number of event-update PDUs received on the distributing port. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.25 | ColumnfsLaPortChannelDLAGElectedAsMasterCount | read-only | current | This object is used when Distributing feature and redundancy feature both are enabled in a D-LAG node to hold the number of times the port-channel has been sel… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.26 | ColumnfsLaPortChannelDLAGElectedAsSlaveCount | read-only | current | This object is used when Distributing feature and redundancy feature both are enabled in a D-LAG node to hold the number of times the port-channel has been sel… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.27 | ColumnfsLaPortChannelTrapTxCount | read-only | current | The number of trap messages sent from the port-channel. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.28 | ColumnfsLaPortChannelDLAGDistributingPortList | read-write | current | This object is used to configure the distributing port list on which D-LAG periodic-sync and D-LAG event-update messages will be sent/received for D-LAG intern… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.29 | ColumnfsLaPortChannelFallback | read-write | current | This object is used to enable or disable fallback on this port-channel. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.30 | ColumnfsLaPortChannelFallbackTime | read-write | current | Duration of a port to bundle state. |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.31 | ColumnfsLaPortChannelFallbackState | read-only | current | This read-only object is used to display the fallback state in this port-channel. init(0) - Fallback is disabled in this port-channel. inactive(1) - Fallback i… |
| 1.3.6.1.4.1.10876.101.1.63.2.1.1.32 | ColumnfsLaPortChannelFallbackSysId | read-write | current | This object is used to specify which MLAG portal system can bring up the local aggregator port if LACPDU is not received from the LACP partner. If this object … |
| 1.3.6.1.4.1.10876.101.1.63.3 | NodefsLaPort | |||
| 1.3.6.1.4.1.10876.101.1.63.3.1 | TablefsLaPortTable | not-accessible | current | A table that contains objects to set the port lacp mode of dot3adAggPortTable. |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1 | RowfsLaPortEntry | not-accessible | current | Each entry in this table is for each physical port that participates in Link Aggregation which can be either aggregatable or individual. This table is indexed … |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.1 | ColumnfsLaPortIndex | not-accessible | current | The ifIndex of the port |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.2 | ColumnfsLaPortMode | read-write | current | This object is used to enable LACP , disable LACP or manually aggregate a port |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.3 | ColumnfsLaPortBundleState | read-only | current | This read-only object is used to display the port state in aggregation upInBndl(0) - The port is operationally up and actively takes part in aggregation. stand… |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.4 | ColumnfsLaPortActorResetAdminState | read-write | current | A string of 8 bits,corresponding to the administrative values of Actor_State as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Acto… |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.5 | ColumnfsLaPortAggregateWaitTime | read-write | current | Duration of the port to attach to the PortChannel. |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.6 | ColumnfsLaPortPartnerResetAdminState | read-write | current | A string of 8 bits,corresponding to the administrative values of Partner_State.The first bit corresponds to bit 0 of Partner_State (LACP_Activity),the second b… |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.7 | ColumnfsLaPortActorAdminPort | read-write | current | The port number used as dot3adAggPortActorPort and is communicated in LACPDUs as the Actor_Port. |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.8 | ColumnfsLaPortRestoreMtu | read-write | current | The Restore mtu stores the original MTU of the port before getting aggregated to port channel. A SET on the MIB object is not allowed for SNMP users. This oper… |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.9 | ColumnfsLaPortSelectAggregator | read-only | current | This read-only object is used to display whether the port participates in dynamic aggregator selection. The default will be static aggregation selection. stati… |
| 1.3.6.1.4.1.10876.101.1.63.3.1.1.10 | ColumnfsLaPortAutoLAG | read-write | current | Enable or Disable Auto-LAG on individual port. |
| 1.3.6.1.4.1.10876.101.1.63.4 | NodefsLaTrapObjects | |||
| 1.3.6.1.4.1.10876.101.1.63.4.1 | TablefsLaHwFailTrapObjectsTable | not-accessible | current | This table is used to store the notification information occurred |
| 1.3.6.1.4.1.10876.101.1.63.4.1.1 | RowfsLaHwFailTrapObjectsEntry | not-accessible | current | This entry is used to store the notification information |
| 1.3.6.1.4.1.10876.101.1.63.4.1.1.1 | ColumnfsLaTrapPortChannelIndex | not-accessible | current | The ifIndex of the port-channel for which the failure has occured. |
| 1.3.6.1.4.1.10876.101.1.63.4.1.1.2 | ColumnfsLaTrapPortIndex | not-accessible | current | The ifIndex of the port for which the failure has occured. A value of 0 means the failure is not port-specific. |
| 1.3.6.1.4.1.10876.101.1.63.4.1.1.3 | ColumnfsLaHwFailTrapType | read-only | current | The hardware error type. |
| 1.3.6.1.4.1.10876.101.1.63.4.2 | TablefsLaDLAGTrapObjectsTable | not-accessible | current | This table is used to store the notification information occurred for the Distributed Link Aggregation. |
| 1.3.6.1.4.1.10876.101.1.63.4.2.1 | RowfsLaDLAGTrapObjectsEntry | not-accessible | current | This entry is used to store the notification information. |
| 1.3.6.1.4.1.10876.101.1.63.4.2.1.1 | ColumnfsLaDLAGTrapPortChannelIndex | not-accessible | current | The port-channel interface index of the node which is role change event has occurred because of the master-slave-re-selection process. The role change can be e… |
| 1.3.6.1.4.1.10876.101.1.63.4.2.1.2 | ColumnfsLaDLAGTrapType | read-only | current | Traps generated in the master-slave selection/ master-slave-reselection process Trap Type can be mastertobackupmaster : When the role played by the device chan… |
| 1.3.6.1.4.1.10876.101.1.63.5 | NodefsFutureLaTraps | |||
| 1.3.6.1.4.1.10876.101.1.63.5.0 | NodefsLaTraps | |||
| 1.3.6.1.4.1.10876.101.1.63.5.0.1 | NotificationfsLaHwFailureTrap | current | Generated when any of the fsLaHwFailTrapType event occurs | |
| 1.3.6.1.4.1.10876.101.1.63.5.0.2 | NotificationfsLaDLAGTrap | current | Generated when any of the fsLaDLAGTrapType event occurs. | |
| 1.3.6.1.4.1.10876.101.1.63.6 | NodefsLaDLAGRemotePortChannel | |||
| 1.3.6.1.4.1.10876.101.1.63.6.1 | TablefsLaDLAGRemotePortChannelTable | not-accessible | current | This table is used to access the stored details of all remote port-channels that are part of same D-LAG. This table is indexed by Port channel index and remote… |
| 1.3.6.1.4.1.10876.101.1.63.6.1.1 | RowfsLaDLAGRemotePortChannelEntry | not-accessible | current | There is one entry in this table for each remote port-channel participating in Distributed LAG other than the self. |
| 1.3.6.1.4.1.10876.101.1.63.6.1.1.1 | ColumnfsLaDLAGRemotePortChannelSystemID | not-accessible | current | This is used to read the stored 6-octet MAC address value of each remote D-LAG node, which uniquely identifies the remote D-LAG node. |
| 1.3.6.1.4.1.10876.101.1.63.6.1.1.2 | ColumnfsLaDLAGRemotePortChannelSystemPriority | read-only | current | This object is used to read the stored system priority of each remote D-LAG node |
| 1.3.6.1.4.1.10876.101.1.63.6.1.1.3 | ColumnfsLaDLAGRemotePortChannelRolePlayed | read-only | current | This object is used to read the stored value of current role played by each remote D-LAG node Value of Role Played by the remote D-LAG node can be none (0) - C… |
| 1.3.6.1.4.1.10876.101.1.63.6.1.1.4 | ColumnfsLaDLAGRemotePortChannelKeepAliveCount | read-only | current | This object represents the current keep alive count value of running keep alive counter maintained for each remote D-LAG node. This count will be incremented b… |
| 1.3.6.1.4.1.10876.101.1.63.7 | NodefsLaDLAGRemotePort | |||
| 1.3.6.1.4.1.10876.101.1.63.7.1 | TablefsLaDLAGRemotePortTable | not-accessible | current | This table is used to access the stored port list information of each remote D-LAG node. This table is indexed by combination of port-channel index, remote por… |
| 1.3.6.1.4.1.10876.101.1.63.7.1.1 | RowfsLaDLAGRemotePortEntry | not-accessible | current | There is one entry in this table for each port belonging to the remote D-LAG node. |
| 1.3.6.1.4.1.10876.101.1.63.7.1.1.1 | ColumnfsLaDLAGRemotePortIndex | not-accessible | current | This object is used to get the ifIndex of each port belonging to the remote D-LAG node. |
| 1.3.6.1.4.1.10876.101.1.63.7.1.1.2 | ColumnfsLaDLAGRemotePortBundleState | read-only | current | This read-only object is used to get the port bundle states of each port belonging to the remote D-LAG node upInBndl(0) - The port is operationally up and acti… |
| 1.3.6.1.4.1.10876.101.1.63.7.1.1.3 | ColumnfsLaDLAGRemotePortSyncStatus | read-only | current | This read-only object is used to get the current sync status of the each port belonging to the remote D-LAG node inSync(1) - The port sync status is inSync. ou… |
| 1.3.6.1.4.1.10876.101.1.63.8 | NodefsLaDrni | |||
| 1.3.6.1.4.1.10876.101.1.63.8.1 | TablefsLaDrniTable | not-accessible | current | A table that contains information about every DRNI that is associated with this System. |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1 | RowfsLaDrniEntry | not-accessible | current | A list of the DRNI parameters. This is indexed by the DRNI Portal ID. |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.1 | ColumnfsLaDrniIndex | not-accessible | current | The unique identifier allocated to this Distributed Relay by the local System. This attribute identifies a Distributed Relay instance among the subordinate man… |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.2 | ColumnfsLaDrniDescription | read-only | current | A human-readable text string containing information about the Distribute Relay. This string is read-only. The contents are vendor specific. |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.3 | ColumnfsLaDrniName | read-write | current | A human-readable text string containing a locally significant name for the Distributed Relay. This string is read-write. |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.4 | ColumnfsLaDrniPortalAddr | read-write | current | A read-write identifier of a particular Portal. aDrniPortalAddr has to be unique among at least all of the potential Portal Systems to which a given Portal Sys… |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.5 | ColumnfsLaDrniPortalPriority | read-write | current | A 2-octet read-write value indicating the priority value associated with the Portal's System ID. Also used as the Actor's System Priority (6.3.2) for the emula… |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.6 | ColumnfsLaDrniPortalSystemNumber | read-write | current | A read-write identifier of this particular Portal System within a Portal. It is the responsibility of the network administrator to ensure that these numbers ar… |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.7 | ColumnfsLaDrniIntraPortalLinkList | read-write | current | Read-write list of the Interface Identifiers of the Ports to the Intra-Portal Links assigned to this Distributed Relay. Each Interface Identifier, a Port ID (6… |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.8 | ColumnfsLaDrniAggregator | read-write | current | An INTEGER that matches the syntax of an Interface Identifier. Read-write Interface Identifier of the Aggregator Port assigned to this Distributed Relay. |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.9 | ColumnfsLaDrniNeighborAdminDRCPState | read-write | current | A string of 8 bits, corresponding to the administrative values of DRCP_State [item s) in 9.4.3.2] as transmitted by this Portal System in DRCPDUs. The first bi… |
| 1.3.6.1.4.1.10876.101.1.63.8.1.1.10 | ColumnfsLaDrniPSI | read-only | current | A read-only Boolean value providing the value of PSI, which indicates whether this Portal System is isolated from the other Portal Systems within the same Port… |
| 1.3.6.1.4.1.10876.101.1.63.9 | NodefsLaIPP | |||
| 1.3.6.1.4.1.10876.101.1.63.9.1 | TablefsLaIPPAttributeTable | not-accessible | current | A table that contains information about every IPP that is associated with this System. |
| 1.3.6.1.4.1.10876.101.1.63.9.1.1 | RowfsLaIPPAttributeEntry | not-accessible | current | An entry containing Attributes for an IPP. |
| 1.3.6.1.4.1.10876.101.1.63.9.1.1.1 | ColumnfsLaIPPIndex | not-accessible | current | The unique identifier allocated to this IPP by the local Portal System. This attribute identifies an IPP instance among the subordinate managed objects of the … |
| 1.3.6.1.4.1.10876.101.1.63.9.1.1.2 | ColumnfsLaIPPAdminState | read-write | current | This read-write value defines the administrative state of the IPP. A value of 'up' indicates that the operational state of the IPP (aIPPOperState) is permitted… |
| 1.3.6.1.4.1.10876.101.1.63.9.1.1.3 | ColumnfsLaIPPOperState | read-only | current | This read-only value defines the operational state of the IPP. The operational state is 'up' if the IPL is operational, and if the value of aIPPAdminState for … |
| 1.3.6.1.4.1.10876.101.1.63.9.1.1.4 | ColumnfsLaIPPTimeOfLastOperChange | read-only | current | The time at which the interface entered its current operational state, in terms of centiseconds since the system was last reset. If the current state was enter… |
| 1.3.6.1.4.1.10876.101.1.63.9.2 | TablefsLaIPPStatsTable | not-accessible | current | A table that contains information for IPP statistics. A row appears in this table for each IPP in the system. |
| 1.3.6.1.4.1.10876.101.1.63.9.2.1 | RowfsLaIPPStatsEntry | not-accessible | current | An entry containing Statistics for an IPP. |
| 1.3.6.1.4.1.10876.101.1.63.9.2.1.1 | ColumnfsLaIPPStatsDRCPDUsRx | read-only | current | The number of valid DRCPDUs received on this IPP. This value is read-only. |
| 1.3.6.1.4.1.10876.101.1.63.9.2.1.2 | ColumnfsLaIPPStatsIllegalRx | read-only | current | The number of frames received that carry the DRCP Ethernet Type value (9.4.2.4), but contain a badly formed PDU. This value is read-only. |
| 1.3.6.1.4.1.10876.101.1.63.9.2.1.3 | ColumnfsLaIPPStatsDRCPDUsTx | read-only | current | The number of DRCPDUs transmitted on this IPP. This value is read-only. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AggState | INTEGER { up(1), down(2) } | current | The state of the object entry. |
| DrcpState | BITS { homeGateway(0), neighborGateway(1), otherGateway(2), ippActivity(3), timeout(4), gatewaySync(5), portSync(6), expired(7) } | current | Administrative values of DRCP state. |
| LacpKey | Integer32 (0..65535) | current | The Actor or Partner Key value. |
| LacpState | BITS { lacpActivity(0), lacpTimeout(1), aggregation(2), synchronization(3), collecting(4), distributing(5), defaulted(6), expired(7) } | current | The Actor and Partner State values from the LACPDU. |
| PortalLinkList | OCTET STRING (SIZE (12)) | current | Each four octets of the octet string represent an ifIndex for an Intra-Port Link. The first ifIndex is to Portal System 1, the second ifIndex is to Portal System 2 and the third ifIndex is to portal System 3. The ifInde… |
| PortLaMode | INTEGER { lacp(1), manual(2), disable(3) } | current | Defines how a Port Channel does channeling. lacp(1) - place the port into passive negotiation state, in which the port waits for its peer to initiate negotiation. manual(2) - force the port to enable channeling. disable… |