MIB Viewer

SUPERMICRO-MI-TCP-MIB

72 objects
This mib module is for manging TCP module with virtual routing and forwarding support.
OIDNameAccessStatusDescription
1.3.6.1.4.1.10876.101.2.76IdentityfsMITcpThis mib module is for manging TCP module with virtual routing and forwarding support.
1.3.6.1.4.1.10876.101.2.76.1ScalarfsMITcpGlobalTraceDebugread-writecurrentThis object is used to trace statements in Tcp Module.
1.3.6.1.4.1.10876.101.2.76.2TablefsMIContextTablenot-accessiblecurrentThis table contains the global configurations of the TCP module for each VRF.
1.3.6.1.4.1.10876.101.2.76.2.1RowfsMIContextEntrynot-accessiblecurrentAn context Table Entry for particular VR.
1.3.6.1.4.1.10876.101.2.76.2.1.1ColumnfsMITcpContextIdnot-accessiblecurrentThe virtual router identifier to identify the VRF.
1.3.6.1.4.1.10876.101.2.76.2.1.2ColumnfsMITcpAckOptionread-writecurrentThe algorithm used to determine the acknowledgement policy to be followed by the receiving TCP
1.3.6.1.4.1.10876.101.2.76.2.1.3ColumnfsMITcpTimeStampOptionread-writecurrentA flag to note whether the Time Stamp option is enabled
1.3.6.1.4.1.10876.101.2.76.2.1.4ColumnfsMITcpBigWndOptionread-writecurrentA flag to note whether the Big Window option is enabled
1.3.6.1.4.1.10876.101.2.76.2.1.5ColumnfsMITcpIncrIniWndread-writecurrentA flag to note whether the Increased Initial Window feature is enabled
1.3.6.1.4.1.10876.101.2.76.2.1.6ColumnfsMITcpMaxNumOfTCBread-writecurrentMaximum Number of TCP connections.
1.3.6.1.4.1.10876.101.2.76.2.1.7ColumnfsMITcpTraceDebugread-writecurrentThis is used to enable Trace Statements in context table. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte in…
1.3.6.1.4.1.10876.101.2.76.2.1.8ColumnfsMITcpMaxReTriesread-writecurrentWhen data send is not acknowledged , TCP re-transmits the data. This object is used to configure either INDEX or AUGMENTS may be used, but not boththe maximum …
1.3.6.1.4.1.10876.101.2.76.2.1.9ColumnfsMITcpClearStatisticsread-writecurrentWhen this object is set to enable this will reset the statistics obtained for that context. This object cannot be set to disable. Get of the object will always…
1.3.6.1.4.1.10876.101.2.76.2.1.10ColumnfsMITcpTrapAdminStatusread-writecurrentIf this object is set to disable, then the NOTIFICATION messages wont be sent to the SNMP Manager. If enabled, NOTIFICATION messages are sent.
1.3.6.1.4.1.10876.101.2.76.3TablefsMITcpConnTablenot-accessiblecurrentA table containing TCP connection-specific information for each virtual router.
1.3.6.1.4.1.10876.101.2.76.3.1RowfsMITcpConnEntrynot-accessiblecurrentInformation about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make…
1.3.6.1.4.1.10876.101.2.76.3.1.2ColumnfsMITcpConnLocalAddressnot-accessiblecurrentThe local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc…
1.3.6.1.4.1.10876.101.2.76.3.1.3ColumnfsMITcpConnLocalPortnot-accessiblecurrentThe local port number for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.3.1.4ColumnfsMITcpConnRemAddressnot-accessiblecurrentThe remote IP address for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.3.1.5ColumnfsMITcpConnRemPortnot-accessiblecurrentThe remote port number for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.3.1.6ColumnfsMITcpConnOutStateread-onlycurrentThe output state for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.3.1.7ColumnfsMITcpConnSWindowread-onlycurrentThe send window(SND.WND) for this TCP connection. It indicates the amount of data that the peer TCP is willing to accept.
1.3.6.1.4.1.10876.101.2.76.3.1.8ColumnfsMITcpConnRWindowread-onlycurrentThe receive window(RCV.WND) for this TCP connection. It indicates the amount of data that TCP is willing to accept.
1.3.6.1.4.1.10876.101.2.76.3.1.9ColumnfsMITcpConnCWindowread-onlycurrentThe congestion window for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.3.1.10ColumnfsMITcpConnSSThreshread-onlycurrentThe slow start thresh-hold for this TCP connection. It indicates the window size limit crossing which TCP transitions from the slow start phase to congestion a…
1.3.6.1.4.1.10876.101.2.76.3.1.11ColumnfsMITcpConnSMSSread-onlycurrentThe send maximum segment size for this TCP connection. It is negotiated during connection establishment.
1.3.6.1.4.1.10876.101.2.76.3.1.12ColumnfsMITcpConnRMSSread-onlycurrentThe receive maximum segment size for this TCP connection
1.3.6.1.4.1.10876.101.2.76.3.1.13ColumnfsMITcpConnSRTread-onlycurrentThe smooth round trip time for this TCP connection. It is updated based on the round trip time.
1.3.6.1.4.1.10876.101.2.76.3.1.14ColumnfsMITcpConnRTDEread-onlycurrentThe round trip deviation estimator for this TCP connection. It is updated based on the round trip time.
1.3.6.1.4.1.10876.101.2.76.3.1.15ColumnfsMITcpConnPersistread-onlycurrentThe persist timeout value for this TCP connection
1.3.6.1.4.1.10876.101.2.76.3.1.16ColumnfsMITcpConnRexmtread-onlycurrentThe retransmit timeout value for this TCP connection
1.3.6.1.4.1.10876.101.2.76.3.1.17ColumnfsMITcpConnRexmtCntread-onlycurrentThe no of retransmissions for this TCP connection
1.3.6.1.4.1.10876.101.2.76.3.1.18ColumnfsMITcpConnSBCountread-onlycurrentThe number of valid bytes from the send buffer which are to be sent to the peer TCP for this TCP connection
1.3.6.1.4.1.10876.101.2.76.3.1.19ColumnfsMITcpConnSBSizeread-onlycurrentThe send buffer size for this TCP connection
1.3.6.1.4.1.10876.101.2.76.3.1.20ColumnfsMITcpConnRBCountread-onlycurrentThe number of valid bytes from the receive buffer which are to be sent to the upper application for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.3.1.21ColumnfsMITcpConnRBSizeread-onlycurrentThe receive buffer size for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.3.1.22ColumnfsMITcpKaMainTmrread-writecurrentThe main timeout value used for Keepalive
1.3.6.1.4.1.10876.101.2.76.3.1.23ColumnfsMITcpKaRetransTmrread-writecurrentThe retransmission timeout used for Keepalive
1.3.6.1.4.1.10876.101.2.76.3.1.24ColumnfsMITcpKaRetransCntread-writecurrentThe no. of retransmissions before aborting the connection during Keepalive
1.3.6.1.4.1.10876.101.2.76.4TablefsMITcpExtConnTablenot-accessiblecurrentA table containing TCP connection-specific TCP MD5 & TCP-AO information.
1.3.6.1.4.1.10876.101.2.76.4.1RowfsMITcpExtConnEntrynot-accessiblecurrentInformation about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make…
1.3.6.1.4.1.10876.101.2.76.4.1.1ColumnfsMITcpConnMD5Optionread-onlycurrentA flag to note if MD5 option is enabled for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.4.1.2ColumnfsMITcpConnMD5ErrCtrread-onlycurrentThe number of incoming segments dropped due to MD5 authentication failure
1.3.6.1.4.1.10876.101.2.76.4.1.3ColumnfsMITcpConnTcpAOOptionread-onlycurrentA flag to note if TCP-AO option is enabled for this TCP connection.
1.3.6.1.4.1.10876.101.2.76.4.1.4ColumnfsMITcpConTcpAOCurKeyIdread-onlycurrentIndicates the send key id of the MKT currently used by this TCP session
1.3.6.1.4.1.10876.101.2.76.4.1.5ColumnfsMITcpConTcpAORnextKeyIdread-onlycurrentIndicates the receive key id of the MKT currently preferred by the sender for authenticating incoming packets. If the sender wants to change the currently used…
1.3.6.1.4.1.10876.101.2.76.4.1.6ColumnfsMITcpConTcpAORcvKeyIdread-onlycurrentIndicates the value in the keyId field of the latest received packet on this connection
1.3.6.1.4.1.10876.101.2.76.4.1.7ColumnfsMITcpConTcpAORcvRnextKeyIdread-onlycurrentIndicates the value in the RNextKeyId field of the latest received packet on this connection
1.3.6.1.4.1.10876.101.2.76.4.1.8ColumnfsMITcpConTcpAOConnErrCtrread-onlycurrentThe number of incoming segments dropped due to TCP-AO authentication failure
1.3.6.1.4.1.10876.101.2.76.4.1.9ColumnfsMITcpConTcpAOSndSneread-onlycurrentSend side SNE(Sequence Number Extension). SNE increments whenever the tcp sequence number rolls over, so that differentiation between TCP segments with same se…
1.3.6.1.4.1.10876.101.2.76.4.1.10ColumnfsMITcpConTcpAORcvSneread-onlycurrentReceive side SNE(Sequence Number Extension). SNE increments whenever the tcp sequence number rolls over, so that differentiation between TCP segments with same…
1.3.6.1.4.1.10876.101.2.76.5NodefsMITcpNotification
1.3.6.1.4.1.10876.101.2.76.5.0NodefsMITcpTrap
1.3.6.1.4.1.10876.101.2.76.5.0.1NotificationfsMITcpAoAuthErrorcurrentA fsMITcpTcpAoAuthError trap is generated when TCP-AO authentication fails for incoming packets on a particular TCP connection
1.3.6.1.4.1.10876.101.2.76.5.1NodefsMITcpObjects
1.3.6.1.4.1.10876.101.2.76.5.1.1ScalarfsMITcpAoLocalAddressTypeaccessible-for-notifycurrentThis object refers to the addresstype of local address of a tcp connection. Used for sending TCP specific Traps.
1.3.6.1.4.1.10876.101.2.76.5.1.2ScalarfsMITcpAoLocalAddressaccessible-for-notifycurrentThis object refers to the local address of a tcp connection. Used for sending TCP specific Traps.
1.3.6.1.4.1.10876.101.2.76.5.1.3ScalarfsMITcpAoLocalPortaccessible-for-notifycurrentThis object refers to the local port of a tcp connection. Used for sending TCP specific Traps.
1.3.6.1.4.1.10876.101.2.76.5.1.4ScalarfsMITcpAoRemAddressTypeaccessible-for-notifycurrentThis object refers to the addresstype of remote address of a tcp connection. Used for sending TCP specific Traps.
1.3.6.1.4.1.10876.101.2.76.5.1.5ScalarfsMITcpAoRemAddressaccessible-for-notifycurrentThis object refers to the remote address of a tcp connection. Used for sending TCP specific Traps.
1.3.6.1.4.1.10876.101.2.76.5.1.6ScalarfsMITcpAoRemPortaccessible-for-notifycurrentThis object refers to the remote port of a tcp connection. Used for sending TCP specific Traps.
1.3.6.1.4.1.10876.101.2.76.5.1.7ScalarfsMITcpAoContextIdaccessible-for-notifycurrentThe virtual router identifier to identify the VRF. Used for sending TCP specific Traps.
1.3.6.1.4.1.10876.101.2.76.6TablefsMITcpAoConnTestTablenot-accessiblecurrentA table containing TCP connection-specific TCP-AO information for testing purpose alone.
1.3.6.1.4.1.10876.101.2.76.6.1RowfsMITcpAoConnTestEntrynot-accessiblecurrentInformation about a particular current TCP connection for testing.
1.3.6.1.4.1.10876.101.2.76.6.1.2ColumnfsMITcpAoConnTestLclAdrTypenot-accessiblecurrentThis object refers to the addresstype of local address of a tcp connection. Used for testing TCP-AO.
1.3.6.1.4.1.10876.101.2.76.6.1.3ColumnfsMITcpAoConnTestLclAdressnot-accessiblecurrentThis object refers to the local address of a tcp connection. Used for testing TCP-AO
1.3.6.1.4.1.10876.101.2.76.6.1.4ColumnfsMITcpAoConnTestLclPortnot-accessiblecurrentThis object refers to the local port of a tcp connection. Used for testing TCP-AO
1.3.6.1.4.1.10876.101.2.76.6.1.5ColumnfsMITcpAoConnTestRmtAdrTypenot-accessiblecurrentThis object refers to the addresstype of local address of a tcp connection. Used for testing TCP-AO.
1.3.6.1.4.1.10876.101.2.76.6.1.6ColumnfsMITcpAoConnTestRmtAdressnot-accessiblecurrentThis object refers to the local address of a tcp connection. Used for testing TCP-AO
1.3.6.1.4.1.10876.101.2.76.6.1.7ColumnfsMITcpAoConnTestRmtPortnot-accessiblecurrentThis object refers to the local port of a tcp connection. Used for testing TCP-AO
1.3.6.1.4.1.10876.101.2.76.6.1.8ColumnfsMITcpConTcpAOIcmpIgnCtrread-onlycurrentThis object refers to the number of ICMPv4 type 3 and ICMPv6 type 1 messages ignored on this tcp connection. Used for testing TCP-AO
1.3.6.1.4.1.10876.101.2.76.6.1.9ColumnfsMITcpConTcpAOSilentAccptCtrread-onlycurrentThis object refers to the number of TCP-AO silent accepts (due to no matching MKT config for a received segment with TCP-AO option) on this connection. Used fo…