SUPERMICRO-MIIPV6-MIB
193 objects
The MIB module for IPv6
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetScopeType InetZoneIndex |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| SUPERMICRO-MISTD-IPVX-MIB | fsMIStdIpContextId fsMIStdIpIfStatsIfIndex fsMIStdIpv6InterfaceEntry fsMIStdIpv6InterfaceIfIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.35 | IdentityfsMIipv6MIB | The MIB module for IPv6 | ||
| 1.3.6.1.4.1.10876.101.2.35.1 | NodefsMIipv6 | |||
| 1.3.6.1.4.1.10876.101.2.35.1.1 | TablefsMIIpv6ContextTable | not-accessible | current | This table contains the global configurations for IPv6 for each VR. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1 | RowfsMIIpv6ContextEntry | not-accessible | current | Each entry has the IPv6 global configuration for each VR. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.1 | ColumnfsMIIpv6NdCacheMaxRetries | read-write | current | This object specifies the maximum number of retries that can be attempted upon resolving the 'physical' address of an IPv6 address during address resolution or… |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.2 | ColumnfsMIIpv6PmtuConfigStatus | read-write | current | Flag to enable or disable Path MTU Discovery for the node. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.3 | ColumnfsMIIpv6PmtuTimeOutInterval | read-write | current | The time in minutes after which the path MTU entry times out. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.4 | ColumnfsMIIpv6JumboEnable | read-write | current | Flag to enable or disable IPv6 Jumbogram facility for the node. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.5 | ColumnfsMIIpv6NumOfSendJumbo | read-only | current | Number of IPv6 Jumbograms sent from the node. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.6 | ColumnfsMIIpv6NumOfRecvJumbo | read-only | current | Number of IPv6 Jumbograms received. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.7 | ColumnfsMIIpv6ErrJumbo | read-only | current | Number of IPv6 Error Jumbograms received or transmitted. |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.8 | ColumnfsMIIpv6ContextDebug | read-write | current | Enables the tracing in the selected submodule in IP6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - B… |
| 1.3.6.1.4.1.10876.101.2.35.1.1.1.9 | ColumnfsMIIpv6RFC5095Compatibility | read-write | current | When the IPv6 node is configured to be RFC5095 compatible, then it should treat Type 0 Routing Header as invalid routing header type. |
| 1.3.6.1.4.1.10876.101.2.35.1.2 | TablefsMIIpv6IfTable | not-accessible | current | The IPv6 Interface table contains information on the entity's internetwork-layer interfaces on which IPv6. protocol is enabled. An IPv6 interface constitutes a… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1 | RowfsMIIpv6IfEntry | not-accessible | current | An interface entry containing objects about a particular IPv6 interface. The entry is created or deleted from SNMP. |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.1 | ColumnfsMIIpv6IfType | read-only | current | The type of interface immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.2 | ColumnfsMIIpv6IfPortNum | read-only | current | This object identifies the 'interface' over which this network interface operates and is dependent on the value of fsMIIpv6IfType. This object reflects the ifi… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.3 | ColumnfsMIIpv6IfCircuitNum | read-only | current | This object identifies the circuit over which this network interface operates and is dependent on the value of fsMIIpv6IfType. If the data-link layer is Ethern… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.4 | ColumnfsMIIpv6IfToken | read-write | current | The address token for this interface that is (at least) unique on the link this interface is attached to. This token can be specified only if the fsMIIpv6IfTyp… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.5 | ColumnfsMIIpv6IfOperStatus | read-only | current | The operational state of interface. It is up(1) if the fsMIStdIpv6InterfaceEnableStatus is 'up' and the layer below the network layer is also operational. Othe… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.6 | ColumnfsMIIpv6IfRouterAdvStatus | read-write | current | The router advertisement status on this interface. When the object is set to enabled(1), router advertisements can be allowed on the IPv6 interface. Otherwise,… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.7 | ColumnfsMIIpv6IfRouterAdvFlags | read-write | current | This object specifies the bits to be set in the router advertisements sent by this entity on this interface. M-bit set in the router advertisement indicates ho… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.8 | ColumnfsMIIpv6IfHopLimit | read-write | current | The Hop Limit value to be placed in the router advertisements sent on this IPv6 interface. |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.9 | ColumnfsMIIpv6IfDefRouterTime | read-write | current | The default router time to be indicated in the router advertisements sent on this IPv6 interface. This defines the time in seconds for which this entity acts a… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.10 | ColumnfsMIIpv6IfReachableTime | read-write | current | The reachable time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds that… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.11 | ColumnfsMIIpv6IfRetransmitTime | read-write | current | The retransmit time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds bet… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.12 | ColumnfsMIIpv6IfDelayProbeTime | read-write | current | The time in seconds to delay before starting unreachability probing of neighbor entries which are stale. |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.13 | ColumnfsMIIpv6IfPrefixAdvStatus | read-write | current | The prefix advertisement status on this IPv6 interface. Object value enabled(1) allows the configured prefixes to be advertised in router advertisements. Other… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.14 | ColumnfsMIIpv6IfMinRouterAdvTime | read-write | current | The minimum time in seconds allowed between sending unsolicited router advertisements.The default value is one-third the default value of fsMIIpv6IfMaxRouterAd… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.15 | ColumnfsMIIpv6IfMaxRouterAdvTime | read-write | current | The maximum time in seconds between sending unsolicited router advertisements. Router advertisements are sent periodically at a random interval between the val… |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.16 | ColumnfsMIIpv6IfDADRetries | read-write | current | The maximum number of neighbor solicitations sent for the purpose of duplicate address detection on a tentative address. |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.17 | ColumnfsMIIpv6IfForwarding | read-write | current | This MIB object is used to configure IPv6 routing and forwarding on this interface. The default value is set to enabled. |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.18 | ColumnfsMIIpv6IfRoutingStatus | read-only | current | This MIB object indicates the current routing status on this interface. This is based on the global IPv6 forwarding status of the mib object 'ipv6Forwarding'. … |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.19 | ColumnfsMIIpv6IfIcmpErrInterval | read-write | current | Time interval between tokens being added to the ICMPv6 token bucket. |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.20 | ColumnfsMIIpv6IfIcmpTokenBucketSize | read-write | current | Maximum number of tokens stored in the ICMPv6 bucket |
| 1.3.6.1.4.1.10876.101.2.35.1.2.1.21 | ColumnfsMIIpv6IfDestUnreachableMsg | read-write | current | Indicates whether ICMPv6 destination unreachable messages are enabled/disabled on this interface. |
| 1.3.6.1.4.1.10876.101.2.35.1.3 | TablefsMIIpv6IfStatsTable | not-accessible | current | IPv6 interface traffic statistics |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1 | RowfsMIIpv6IfStatsEntry | not-accessible | current | An interface statistics entry containing objects at a particular IPv6 interface. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.1 | ColumnfsMIIpv6IfStatsTooBigErrors | read-only | current | The number of datagrams that could not be forwarded because their size exceeded the Path MTU |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.2 | ColumnfsMIIpv6IfStatsInRouterSols | read-only | current | The number of ICMP Router Solicit messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.3 | ColumnfsMIIpv6IfStatsInRouterAdvs | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.4 | ColumnfsMIIpv6IfStatsInNeighSols | read-only | current | The number of ICMP Neighbor Solicit messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.5 | ColumnfsMIIpv6IfStatsInNeighAdvs | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.6 | ColumnfsMIIpv6IfStatsInRedirects | read-only | current | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.7 | ColumnfsMIIpv6IfStatsOutRouterSols | read-only | current | The number of ICMP Router Solicit messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.8 | ColumnfsMIIpv6IfStatsOutRouterAdvs | read-only | current | The number of ICMP Router Advertisement messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.9 | ColumnfsMIIpv6IfStatsOutNeighSols | read-only | current | The number of ICMP Neighbor Solicitation messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.10 | ColumnfsMIIpv6IfStatsOutNeighAdvs | read-only | current | The number of ICMP Neighbor Advertisement messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.11 | ColumnfsMIIpv6IfStatsOutRedirects | read-only | current | The number of Redirect messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.12 | ColumnfsMIIpv6IfStatsLastRouterAdvTime | read-only | current | The time at which the last Periodic router advertisement was sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.13 | ColumnfsMIIpv6IfStatsNextRouterAdvTime | read-only | current | The time at which the next Periodic router advertisement is scheduled to be sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.3.1.14 | ColumnfsMIIpv6IfStatsIcmp6ErrRateLmtd | read-only | current | No of rate limited ICMPv6 messgaes |
| 1.3.6.1.4.1.10876.101.2.35.1.4 | TablefsMIIpv6AddrTable | not-accessible | current | The table containing entity's IPv6 addressing information. |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1 | RowfsMIIpv6AddrEntry | not-accessible | current | The entry in the IPv6 Address Table which defines a unicast, anycast or link-local address on an IPv6 interface. |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.1 | ColumnfsMIIpv6AddrAddress | not-accessible | current | The IPv6 address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.2 | ColumnfsMIIpv6AddrPrefixLen | not-accessible | current | The length of the prefix (in bits) associated with the IPv6 address of this entry. For a link-local address, the prefix is always start with '0xfe80' and the p… |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.3 | ColumnfsMIIpv6AddrAdminStatus | read-create | current | Indicates the desired status of the address. Also a creation of an address can trigger IPv6 to be enabled over the interface. Similarly deletion of all the add… |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.4 | ColumnfsMIIpv6AddrType | read-write | current | Indicates whether the address is a unicast, anycast or link-local address. Syntactically there is no difference between a unicast address and a anycast address… |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.5 | ColumnfsMIIpv6AddrProfIndex | read-write | current | Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this address. For a link-local… |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.6 | ColumnfsMIIpv6AddrOperStatus | read-only | current | Indicates the operational status of the address. A status of failed(4) indicates that a duplicate address has been detected on this IPv6 interface. On interfac… |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.7 | ColumnfsMIIpv6AddrContextId | read-only | current | Indicates the virtual router to which the IPv6 address is applied. |
| 1.3.6.1.4.1.10876.101.2.35.1.4.1.8 | ColumnfsMIIpv6AddrScope | read-only | current | Scope is a 4-bit value that describes the scope of an IPV6 address.An unicast address can possibly have 2 scopes (Linklocal and Global) only. A multicast addre… |
| 1.3.6.1.4.1.10876.101.2.35.1.5 | TablefsMIIpv6AddrProfileTable | not-accessible | current | The table containing information for an address or set of addresses of the entity. |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1 | RowfsMIIpv6AddrProfileEntry | not-accessible | current | The entry in the IPv6 Address Profile Table which contains parameters related to the advertisement of address prefixes. An entry of this table other than the f… |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.1 | ColumnfsMIIpv6AddrProfileIndex | not-accessible | current | A unique value identifying the particular IPv6 Address profile entry. This is referred by fsMIIpv6AddrProfIndex of IPv6 Address Table. The index 0 is created w… |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.2 | ColumnfsMIIpv6AddrProfileStatus | read-write | current | Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2). |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.3 | ColumnfsMIIpv6AddrProfilePrefixAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised in router advertisements sent b… |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.4 | ColumnfsMIIpv6AddrProfileOnLinkAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with on-link flag set in the ro… |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.5 | ColumnfsMIIpv6AddrProfileAutoConfAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with autonomous address configu… |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.6 | ColumnfsMIIpv6AddrProfilePreferredTime | read-write | current | This object specifies the preferred lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in route… |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.7 | ColumnfsMIIpv6AddrProfileValidTime | read-write | current | This object specifies the valid lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in router ad… |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.8 | ColumnfsMIIpv6AddrProfileValidLifeTimeFlag | read-write | current | By setting this flag to fixed (1),the router advertisement Valid life time value is set to fixed and by setting to variable(2), the router advertisement Valid … |
| 1.3.6.1.4.1.10876.101.2.35.1.5.1.9 | ColumnfsMIIpv6AddrProfilePreferredLifeTimeFlag | read-write | current | By setting this flag to fixed (1),the router advertisement Preferred life time value is set to fixed and by setting to variable(2), the router advertisement pr… |
| 1.3.6.1.4.1.10876.101.2.35.1.6 | TablefsMIIpv6IcmpStatsTable | not-accessible | current | The table of ICMP counter statistics for each virtual router. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1 | RowfsMIIpv6IcmpStatsEntry | not-accessible | current | A conceptual row in the fsMIIpv6IcmpStatsTable. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.1 | ColumnfsMIIpv6IcmpInMsgs | read-only | current | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by fsMIIpv6IcmpInErrors. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.2 | ColumnfsMIIpv6IcmpInErrors | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.3 | ColumnfsMIIpv6IcmpInDestUnreachs | read-only | current | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.4 | ColumnfsMIIpv6IcmpInTimeExcds | read-only | current | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.5 | ColumnfsMIIpv6IcmpInParmProbs | read-only | current | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.6 | ColumnfsMIIpv6IcmpInPktTooBigs | read-only | current | The number of ICMP Packet Too Big messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.7 | ColumnfsMIIpv6IcmpInEchos | read-only | current | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.8 | ColumnfsMIIpv6IcmpInEchoReps | read-only | current | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.9 | ColumnfsMIIpv6IcmpInRouterSolicits | read-only | current | The number of ICMP Router Solicit messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.10 | ColumnfsMIIpv6IcmpInRouterAdvertisements | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.11 | ColumnfsMIIpv6IcmpInNeighborSolicits | read-only | current | The number of ICMP Neighbor Solicit messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.12 | ColumnfsMIIpv6IcmpInNeighborAdvertisements | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.13 | ColumnfsMIIpv6IcmpInRedirects | read-only | current | The number of Redirect messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.14 | ColumnfsMIIpv6IcmpInAdminProhib | read-only | current | Number of ICMP destination unreachable/communication administratively prohibited messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.15 | ColumnfsMIIpv6IcmpOutMsgs | read-only | current | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.16 | ColumnfsMIIpv6IcmpOutErrors | read-only | current | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.17 | ColumnfsMIIpv6IcmpOutDestUnreachs | read-only | current | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.18 | ColumnfsMIIpv6IcmpOutTimeExcds | read-only | current | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.19 | ColumnfsMIIpv6IcmpOutParmProbs | read-only | current | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.20 | ColumnfsMIIpv6IcmpOutPktTooBigs | read-only | current | The number of ICMP Packet Too Big messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.21 | ColumnfsMIIpv6IcmpOutEchos | read-only | current | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.22 | ColumnfsMIIpv6IcmpOutEchoReps | read-only | current | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.23 | ColumnfsMIIpv6IcmpOutRouterSolicits | read-only | current | The number of ICMP Router Solicitation messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.24 | ColumnfsMIIpv6IcmpOutRouterAdvertisements | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.25 | ColumnfsMIIpv6IcmpOutNeighborSolicits | read-only | current | The number of ICMP Neighbor Solicitation messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.26 | ColumnfsMIIpv6IcmpOutNeighborAdvertisements | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.27 | ColumnfsMIIpv6IcmpOutRedirects | read-only | current | The number of Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.28 | ColumnfsMIIpv6IcmpOutAdminProhib | read-only | current | Number of ICMP destination unreachable/ communication administratively prohibited messages sent. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.29 | ColumnfsMIIpv6IcmpInBadCode | read-only | current | Number of received ICMP messages having unrecognized type of message |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.30 | ColumnfsMIIpv6IcmpInNARouterFlagSet | read-only | current | The number of ICMP Neighbor Advertisement messages received with Router Flag Set. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.31 | ColumnfsMIIpv6IcmpInNASolicitedFlagSet | read-only | current | The number of ICMP Neighbor Advertisement messages received with Solicited Flag Set. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.32 | ColumnfsMIIpv6IcmpInNAOverrideFlagSet | read-only | current | The number of ICMP Neighbor Advertisement messages received with Override Flag Set. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.33 | ColumnfsMIIpv6IcmpOutNARouterFlagSet | read-only | current | The number of ICMP Neighbor Advertisement messages sent with Router Flag Set. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.34 | ColumnfsMIIpv6IcmpOutNASolicitedFlagSet | read-only | current | The number of ICMP Neighbor Advertisement messages sent with Solicited Flag Set. |
| 1.3.6.1.4.1.10876.101.2.35.1.6.1.35 | ColumnfsMIIpv6IcmpOutNAOverrideFlagSet | read-only | current | The number of ICMP Neighbor Advertisement messages sent with Override Flag Set. |
| 1.3.6.1.4.1.10876.101.2.35.1.7 | TablefsMIIpv6PmtuTable | not-accessible | current | IPv6 Path MTU table. This table contains an entry for a specific path traversed by packets exchanged between the source and destination nodes. |
| 1.3.6.1.4.1.10876.101.2.35.1.7.1 | RowfsMIIpv6PmtuEntry | not-accessible | current | A Path MTU entry. |
| 1.3.6.1.4.1.10876.101.2.35.1.7.1.1 | ColumnfsMIIpv6PmtuDest | not-accessible | current | The destination IPv6 address of the packets to be exchanged. |
| 1.3.6.1.4.1.10876.101.2.35.1.7.1.2 | ColumnfsMIIpv6Pmtu | read-write | current | Indicates the path MTU value for the path. |
| 1.3.6.1.4.1.10876.101.2.35.1.7.1.3 | ColumnfsMIIpv6PmtuTimeStamp | read-only | current | Indicates the entry created time in the PMTU table. |
| 1.3.6.1.4.1.10876.101.2.35.1.7.1.4 | ColumnfsMIIpv6PmtuAdminStatus | read-write | current | The desired status of the PmtuTable. This variable has to be made valid(1) for creating a entry in the PmtuTable. If set to invalid(2), the entry is deleted. |
| 1.3.6.1.4.1.10876.101.2.35.1.9 | TablefsMIIpv6NDProxyListTable | not-accessible | current | Configurable list of IPv6 Addresses for which Proxy Neighbor Discovery is desired. |
| 1.3.6.1.4.1.10876.101.2.35.1.9.1 | RowfsMIIpv6NDProxyListEntry | not-accessible | current | An entry in the ND Proxy List Table. Each entry specifies the IPv6 address for which proxy feature is needed. |
| 1.3.6.1.4.1.10876.101.2.35.1.9.1.1 | ColumnfsMIIpv6NDProxyAddr | not-accessible | current | The IPV6 address for which the system has to act as a Proxy. |
| 1.3.6.1.4.1.10876.101.2.35.1.9.1.2 | ColumnfsMIIpv6NDProxyAdminStatus | read-write | current | The desired state of the ND Proxy list entry. When set to create(1) the system acts as a Proxy for the given address and when set to invalid(2) the Proxy entry… |
| 1.3.6.1.4.1.10876.101.2.35.1.10 | TablefsMIIpv6PingTable | not-accessible | current | This entity's IPv6 Ping Table. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1 | RowfsMIIpv6PingEntry | not-accessible | current | Contains the information about a particular IPv6 Ping operation. An entry is created/deleted from SNMP. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.1 | ColumnfsMIIpv6PingIndex | not-accessible | current | A unique value identifying the particular IPv6 Ping entry. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.2 | ColumnfsMIIpv6PingDest | read-write | current | The IPv6 address of the destination to be pinged. This should be a unicast or link-local address |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.3 | ColumnfsMIIpv6PingIfIndex | read-write | current | The index value which uniquely identifies the IPv6 interface on which this Ping is to be sent. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.4 | ColumnfsMIIpv6PingContextId | read-write | current | The Virtual Router in which the ping session is initiated. The reachability of the destination will be determined in the specified VR. When fsMIIpv6PingIfIndex… |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.5 | ColumnfsMIIpv6PingAdminStatus | read-write | current | The desired status for the ping operation. This variable has to be made up(1) for starting the ping operation. If set to down(2), the ping is stopped but the s… |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.6 | ColumnfsMIIpv6PingInterval | read-write | current | The time interval in seconds between successive pings sent to the destination. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.7 | ColumnfsMIIpv6PingRcvTimeout | read-write | current | The time in seconds after which this entity times out waiting for a particular ping response. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.8 | ColumnfsMIIpv6PingTries | read-write | current | The number of times the destination is to be pinged. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.9 | ColumnfsMIIpv6PingSize | read-write | current | The size of the data portion of the Ping packet. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.10 | ColumnfsMIIpv6PingSentCount | read-only | current | Total number of packets sent to destination. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.11 | ColumnfsMIIpv6PingAverageTime | read-only | current | The average value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.12 | ColumnfsMIIpv6PingMaxTime | read-only | current | The maximum value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.13 | ColumnfsMIIpv6PingMinTime | read-only | current | The minimum value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.14 | ColumnfsMIIpv6PingOperStatus | read-only | current | The current status of this ping operation. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.15 | ColumnfsMIIpv6PingSuccesses | read-only | current | The number of ping responses received. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.16 | ColumnfsMIIpv6PingPercentageLoss | read-only | current | Percentage of lost packets for which no responses were received till timeout. |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.17 | ColumnfsMIIpv6PingData | read-write | current | Data that should be sent in the Ping message |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.18 | ColumnfsMIIpv6PingSrcAddr | read-write | current | Source address to be used for the ping |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.19 | ColumnfsMIIpv6PingZoneId | read-write | current | Zone-Id shoule be able to identify a particular zone of the address's scope. This Zone id applies to all kinds of unicast and multicast addresses of non-global… |
| 1.3.6.1.4.1.10876.101.2.35.1.10.1.20 | ColumnfsMIIpv6PingDestAddrType | read-write | current | The address type of the destination to be pinged. other - unicast or linklocal address. anycast - anycast address .An IPv6 packet cannot have anycast address a… |
| 1.3.6.1.4.1.10876.101.2.35.1.11 | ScalarfsMIIpv6GlobalDebug | read-write | current | Enables the tracing in the selected submodule in IP6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - B… |
| 1.3.6.1.4.1.10876.101.2.35.1.12 | TablefsMIIpv6AddrSelPolicyTable | not-accessible | current | This table is used for default address selection in IPv6. This table is used to configure the Precedence and Label associated with a source/destination address… |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1 | RowfsMIIpv6AddrSelPolicyEntry | not-accessible | current | This table entry is used to configure the following parameters for an IPv6 source/destination address - Prefix, PrefixLen,Ifindex,Preference,Label,Address Type… |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.1 | ColumnfsMIIpv6AddrSelPolicyPrefix | not-accessible | current | The IPv6 Address/Prefix for which the policy needs to be configured. |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.2 | ColumnfsMIIpv6AddrSelPolicyPrefixLen | not-accessible | current | The Prefix length associated with the IPV6 address identified by fsipv6AddrSelPolicyPrefix. |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.3 | ColumnfsMIIpv6AddrSelPolicyIfIndex | not-accessible | current | The index value that uniquely identifies the interface to which this entry is applicable. A value of 0 indicates that the associated address is reachable via a… |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.4 | ColumnfsMIIpv6AddrSelPolicyScope | read-only | current | This MIB object identifies the scope of the IPv6 address. This can take the following values based on whether the address is unicast/anycast or multicast. 0 re… |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.5 | ColumnfsMIIpv6AddrSelPolicyPrecedence | read-write | current | The precedence value associated with the address in the policy table. This value is applicable for destination addresses.Higher the value, higher the precedenc… |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.6 | ColumnfsMIIpv6AddrSelPolicyLabel | read-write | current | The label value associated with the address in the policy table. |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.7 | ColumnfsMIIpv6AddrSelPolicyAddrType | read-write | current | This MIB object is used to configure an address as unicast/anycast/multicast, provided the IPv6 address meets the validation criteria for the address type. |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.8 | ColumnfsMIIpv6AddrSelPolicyIsPublicAddr | read-only | current | This MIB object indicates whether the address configured in the policy table is a private or public address. |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.9 | ColumnfsMIIpv6AddrSelPolicyIsSelfAddr | read-only | current | This MIB object indicates whether the given address is configured on the associated interface and represents a self-address. The associated MIB object fsipv6Ad… |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.10 | ColumnfsMIIpv6AddrSelPolicyReachabilityStatus | read-only | current | This MIB object indicates whether the address configured in the Policy Table is reachable/unreachable |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.11 | ColumnfsMIIpv6AddrSelPolicyConfigStatus | read-only | current | This MIB object indicates whether the associated entry in the Policy table is created automatically or via the administrator. |
| 1.3.6.1.4.1.10876.101.2.35.1.12.1.12 | ColumnfsMIIpv6AddrSelPolicyRowStatus | read-create | current | Administrative Status of the policy table. This object is used to create or delete the entry in the policy table. The following values are not supported for th… |
| 1.3.6.1.4.1.10876.101.2.35.1.13 | TablefsMIIpv6IfScopeZoneMapTable | not-accessible | current | A zone index identifies an instance of a specific scope uniquely within the system.The zone index is used to associate unambiguously an IPv6 address to a speci… |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1 | RowfsMIIpv6IfScopeZoneMapEntry | not-accessible | current | Each entry contains the list of scope identifiers on a given interface. Its a unique value assigned for each scope on an interface. |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.1 | ColumnfsMIIpv6ScopeZoneIndexIfIndex | not-accessible | current | The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.2 | ColumnfsMIIpv6ScopeZoneIndexInterfaceLocal | read-write | current | The zone index for the Interface local scope on this interface. |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.3 | ColumnfsMIIpv6ScopeZoneIndexLinkLocal | read-write | current | The zone index for the link-local scope on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexLinkLocal |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.4 | ColumnfsMIIpv6ScopeZoneIndex3 | read-write | current | The zone index for scope 3 on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex3 |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.5 | ColumnfsMIIpv6ScopeZoneIndexAdminLocal | read-write | current | The zone index for the admin-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexAdminLocal |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.6 | ColumnfsMIIpv6ScopeZoneIndexSiteLocal | read-write | current | The zone index for the site-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexSiteLocal |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.7 | ColumnfsMIIpv6ScopeZoneIndex6 | read-write | current | The zone index for scope 6 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex6 |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.8 | ColumnfsMIIpv6ScopeZoneIndex7 | read-write | current | The zone index for scope 7 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex7 |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.9 | ColumnfsMIIpv6ScopeZoneIndexOrganizationLocal | read-write | current | The zone index for the organization-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexOrganiza… |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.10 | ColumnfsMIIpv6ScopeZoneIndex9 | read-write | current | The zone index for scope 9 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex9 |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.11 | ColumnfsMIIpv6ScopeZoneIndexA | read-write | current | The zone index for scope A on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexA |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.12 | ColumnfsMIIpv6ScopeZoneIndexB | read-write | current | The zone index for scope B on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexB |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.13 | ColumnfsMIIpv6ScopeZoneIndexC | read-write | current | The zone index for scope C on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexC |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.14 | ColumnfsMIIpv6ScopeZoneIndexD | read-write | current | The zone index for scope D on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexD |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.15 | ColumnfsMIIpv6ScopeZoneIndexE | read-write | current | The zone index for scope E on this interface. |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.16 | ColumnfsMIIpv6IfScopeZoneCreationStatus | read-only | current | Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is c… |
| 1.3.6.1.4.1.10876.101.2.35.1.13.1.17 | ColumnfsMIIpv6IfScopeZoneRowStatus | read-create | current | The rowstatus of the scope-zone index table, used in accordance to creation and deletion of scope-zones.To create a row in this table manager sets this object … |
| 1.3.6.1.4.1.10876.101.2.35.1.14 | TablefsMIIpv6ScopeZoneTable | not-accessible | current | The table is used to map each scope-zone index with the interface to which it has been associated. This table is indeed used while forwarding packets to find o… |
| 1.3.6.1.4.1.10876.101.2.35.1.14.1 | RowfsMIIpv6ScopeZoneEntry | not-accessible | current | An entry in the Scope-Zone Index Member Table.Each entry specifies the interface indices associated with a particular scope-zone index |
| 1.3.6.1.4.1.10876.101.2.35.1.14.1.1 | ColumnfsMIIpv6ScopeZoneContextId | not-accessible | current | The Virtual Router in which the scope-zone is created. The reachability of the destination will be determined in the specified VR. |
| 1.3.6.1.4.1.10876.101.2.35.1.14.1.2 | ColumnfsMIIpv6ScopeZoneName | not-accessible | current | Displays the scope zone name value(i.e linklocal1, interfacelocal2) for the scope-zone index |
| 1.3.6.1.4.1.10876.101.2.35.1.14.1.3 | ColumnfsMIIpv6ScopeZoneIndex | read-only | current | A unique value for each scope on an interface. It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.10876.101.2.35.1.14.1.4 | ColumnfsMIIpv6ScopeZoneCreationStatus | read-only | current | Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is c… |
| 1.3.6.1.4.1.10876.101.2.35.1.14.1.5 | ColumnfsMIIpv6ScopeZoneInterfaceList | read-only | current | This MIB object displays all the interfaces that are part of/members of this scope-zone index. These interfaces have the corresponding bit set in the octetlist. |
| 1.3.6.1.4.1.10876.101.2.35.1.14.1.6 | ColumnfsMIIpv6IsDefaultScopeZone | read-write | current | yes- indicates that zone is default zone for the associated scope No - indicates that zone is not the default zone for the associated scope. |
| 1.3.6.1.4.1.10876.101.2.35.2 | NodefsMIipv6Route | |||
| 1.3.6.1.4.1.10876.101.2.35.2.1 | TablefsMIIpv6PrefTable | not-accessible | current | The IPv6 Preference table contains information on the Preference Value for each supported protocol. |
| 1.3.6.1.4.1.10876.101.2.35.2.1.1 | RowfsMIIpv6PrefEntry | not-accessible | current | An entry containing objects about a particular protocols preference value. |
| 1.3.6.1.4.1.10876.101.2.35.2.1.1.1 | ColumnfsMIIpv6Protocol | not-accessible | current | A unique value identifying the protocol whose preference value needs to be processed. |
| 1.3.6.1.4.1.10876.101.2.35.2.1.1.2 | ColumnfsMIIpv6Preference | read-write | current | Preference of the route learned by a particular protocol. This value is used while choosing the best path. Lesser the value, highest is the preference. |
| 1.3.6.1.4.1.10876.101.2.35.3 | NodefsMIIpv6Test | |||
| 1.3.6.1.4.1.10876.101.2.35.3.1 | ScalarfsMIIpv6TestRedEntryTime | read-only | current | Time when the node starts entering active state from standby state |
| 1.3.6.1.4.1.10876.101.2.35.3.2 | ScalarfsMIIpv6TestRedExitTime | read-only | current | Time when the node completes entering active state from standby state |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InterfaceList | OCTET STRING | current | Each octet within this value specifies a set of eight interfaces, with the first octet specifying router-ports 1 through 8, the second octet specifying router-ports 9 through 16, etc. Within each octet, the most signifi… |