MIB Viewer

SUPERMICRO-MIRIP2-MIB

110 objects
The Proprietary RIP MI MIB
Imported Objects
IF-MIBInterfaceIndex
SNMPv2-SMICounter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDateAndTime DisplayString RowStatus TruthValue
SUPERMICRO-MISTDRIP2-MIB--fsMIStdRip2PeerAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.10876.101.1.151IdentityfsMIRipThe Proprietary RIP MI MIB
1.3.6.1.4.1.10876.101.1.151.1NodefsMIRip2GeneralGroup
1.3.6.1.4.1.10876.101.1.151.1.1TablefsMIRip2GlobalTablenot-accessiblecurrentThis Table Contains the list of globals for a Context.
1.3.6.1.4.1.10876.101.1.151.1.1.1RowfsMIRip2GlobalEntrynot-accessiblecurrentAn entry of fsMIRip2GlobalTable.
1.3.6.1.4.1.10876.101.1.151.1.1.1.1ColumnfsMIRipContextIdnot-accessiblecurrentIdentifies the Rip Domain Context.
1.3.6.1.4.1.10876.101.1.151.1.1.1.2ColumnfsMIRip2Securityread-writecurrentA variable denotes the security level of RIP-2 in the system. The value `minimumSecurity` denotes that the RIP1 packets will be accepted even when authenticati…
1.3.6.1.4.1.10876.101.1.151.1.1.1.3ColumnfsMIRip2Peersread-writecurrentThe maximum number of peers that can be in conversation with the RIP2 system simultaneously
1.3.6.1.4.1.10876.101.1.151.1.1.1.4ColumnfsMIRip2TrustNBRListEnableread-writecurrentThe status of neighbor list in the router. The value 'enabled' denotes that a list of router's IP address can be configured and RIP Packets from those router's…
1.3.6.1.4.1.10876.101.1.151.1.1.1.5ColumnfsMIRip2NumberOfDroppedPktsread-onlycurrentNumber of RIP Packets dropped because of neighbor list check.
1.3.6.1.4.1.10876.101.1.151.1.1.1.6ColumnfsMIRip2SpacingEnableread-writecurrentWhether spacing is enabled or not. If spacing is enabled, generation of periodic update packet will be split and send.
1.3.6.1.4.1.10876.101.1.151.1.1.1.7ColumnfsMIRip2AutoSummaryStatusread-writecurrentThis object specify the auto-summary status.If enabled, summary routes are sent in regular updates for both rip v1 and v2.If split hoizon is enabled, summary i…
1.3.6.1.4.1.10876.101.1.151.1.1.1.8ColumnfsMIRip2RetransTimeoutIntread-writecurrentThe timeout interval to be used to retransmit the Update request packet or an unacknowledged update response packet.
1.3.6.1.4.1.10876.101.1.151.1.1.1.9ColumnfsMIRip2MaxRetransmissionsread-writecurrentThe maximum number of retransmissions of the update request and update response packets. If no response is received then the routes via the next hop router are…
1.3.6.1.4.1.10876.101.1.151.1.1.1.10ColumnfsMIRip2OverSubscriptionTimeoutread-writecurrentOver subscription timeout value as mentioned in RFC 2091.When a Circuit DOWN message is received from the circuit manager, this timer will be started for the s…
1.3.6.1.4.1.10876.101.1.151.1.1.1.11ColumnfsMIRip2Propagateread-writecurrentIs propagation of static route is enabled or not. If it is enabled then routing protocols (like RIP) are allowed to include static routes in the update message…
1.3.6.1.4.1.10876.101.1.151.1.1.1.12ColumnfsMIRipTrcFlagread-writecurrentEnables the tracing in the RIP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation …
1.3.6.1.4.1.10876.101.1.151.1.1.1.13ColumnfsMIRipRowStatusread-writecurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.10876.101.1.151.1.1.1.14ColumnfsMIRipAdminStatusread-writecurrentThe administrative status of RIP in a particular router context. The value 'enabled' denotes that the RIP Process is active; 'disabled' disables it on all inte…
1.3.6.1.4.1.10876.101.1.151.1.1.1.15ColumnfsMIRip2LastAuthKeyLifetimeStatusread-writecurrentA flag that decides whether the last authentication key on expiry, should take its lifetime to be infinite or not. If this object is set to true the last key o…
1.3.6.1.4.1.10876.101.1.151.1.1.1.16ColumnfsMIRipRtCountread-onlycurrentThe number of routes in a particular context
1.3.6.1.4.1.10876.101.1.151.1.2ScalarfsMIRipGlobalTrcFlagread-writecurrentEnables Global tracing in the RIP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisati…
1.3.6.1.4.1.10876.101.1.151.1.3TablefsMIRip2NBRTrustListTablenot-accessiblecurrentThis table contains a list of Router addresses from which you can receive RIP Packets
1.3.6.1.4.1.10876.101.1.151.1.3.1RowfsMIRip2NBRTrustListEntrynot-accessiblecurrentAn entry of fsMIRip2NBRTrustListTable.
1.3.6.1.4.1.10876.101.1.151.1.3.1.1ColumnfsMIRip2TrustNBRIpAddrnot-accessiblecurrentIpaddress of the Router from which this router can accept RIP Packets
1.3.6.1.4.1.10876.101.1.151.1.3.1.2ColumnfsMIRip2TrustNBRRowStatusread-writecurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.10876.101.1.151.1.4TablefsMIRip2IfConfTablenot-accessiblecurrentA list of subnets which require separate configuration in RIP.
1.3.6.1.4.1.10876.101.1.151.1.4.1RowfsMIRip2IfConfEntrynot-accessiblecurrentA Single Routing Domain in a single Subnet.
1.3.6.1.4.1.10876.101.1.151.1.4.1.1ColumnfsMIRip2IfConfAddressnot-accessiblecurrentThe IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for…
1.3.6.1.4.1.10876.101.1.151.1.4.1.2ColumnfsMIRip2IfAdminStatread-writecurrentThe administrative status of RIP-2 in the router. The value 'enabled' denotes that the RIP2 Process is active throughout the system. 'disabled' disables RIP2 P…
1.3.6.1.4.1.10876.101.1.151.1.4.1.3ColumnfsMIRip2IfConfOperStateread-onlycurrentThis gives the Operational Status of the Interface
1.3.6.1.4.1.10876.101.1.151.1.4.1.4ColumnfsMIRip2IfConfUpdateTmrread-writecurrentInterval Time Between Updates
1.3.6.1.4.1.10876.101.1.151.1.4.1.5ColumnfsMIRip2IfConfGarbgCollectTmrread-writecurrentInterval before deleting an entry after not hearing it. Also the advertisements of this entry is set to INFINITY while sending to others
1.3.6.1.4.1.10876.101.1.151.1.4.1.6ColumnfsMIRip2IfConfRouteAgeTmrread-writecurrentTime after which the entry is put into garbage collect interval
1.3.6.1.4.1.10876.101.1.151.1.4.1.7ColumnfsMIRip2IfSplitHorizonStatusread-writecurrentA flag to denote the split horizon operational status in the system. The value `splitHorizon` denotes that splitHorizon should be applied in the response packe…
1.3.6.1.4.1.10876.101.1.151.1.4.1.8ColumnfsMIRip2IfConfDefRtInstallread-writecurrentA flag that decides whether the default route received over this interface should be installed to rip database or not.
1.3.6.1.4.1.10876.101.1.151.1.4.1.9ColumnfsMIRip2IfConfSpacingTmrread-writecurrentNumber of route entries are greater than 25 , regular updates (response packets are sent for every fsMIRip2IfConfUpdateTmr interval) are sent in multiple packe…
1.3.6.1.4.1.10876.101.1.151.1.4.1.10ColumnfsMIRip2IfConfInUseKeyread-onlycurrentThis represents the active authentication KeyID that is currently used in the particular interface for sending RIP updates.
1.3.6.1.4.1.10876.101.1.151.1.4.1.11ColumnfsMIRip2IfConfAuthLastKeyStatusread-onlycurrentA flag to indicate that the last key configured on a RIP interface has expired or not.This object is updated during transmission and reception of RIP updates. …
1.3.6.1.4.1.10876.101.1.151.1.5TablefsMIRipMd5AuthTablenot-accessiblecurrentThe MD5 Authentication table for RIP.
1.3.6.1.4.1.10876.101.1.151.1.5.1RowfsMIRipMd5AuthEntrynot-accessiblecurrentAn entry in to the MD5 Authentiaction table. More than one entry can be configured for an interface.
1.3.6.1.4.1.10876.101.1.151.1.5.1.1ColumnfsMIRipMd5AuthAddressnot-accessiblecurrentThe IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for…
1.3.6.1.4.1.10876.101.1.151.1.5.1.2ColumnfsMIRipMd5AuthKeyIdnot-accessiblecurrentThe key ID for this key. This should be unique for the same fsMIRipMd5AuthAddress. This enables the configuration of more than one key for an interface.
1.3.6.1.4.1.10876.101.1.151.1.5.1.3ColumnfsMIRipMd5AuthKeyread-writecurrentThe value to be used as the Authentication Key. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the righ…
1.3.6.1.4.1.10876.101.1.151.1.5.1.4ColumnfsMIRipMd5KeyStartTimeread-writecurrentThe time the router will start accepting or generating the packets that have been created with this key. The start time of the key should be less than the expi…
1.3.6.1.4.1.10876.101.1.151.1.5.1.5ColumnfsMIRipMd5KeyExpiryTimeread-writecurrentThe time the router will stop accepting the packets that have been created with this key. This time will be indicated (in the number of seconds) from the start…
1.3.6.1.4.1.10876.101.1.151.1.5.1.6ColumnfsMIRipMd5KeyRowStatusread-writecurrentThe status of this row by which a new entry can be created or deleted by setting this object to the appropriate value as mentioned in SMI-v2.If this entry is m…
1.3.6.1.4.1.10876.101.1.151.1.6TablefsMIRip2NBRUnicastListTablenot-accessiblecurrentThis table contains a list of Router addresses from which you can receive RIP Packets
1.3.6.1.4.1.10876.101.1.151.1.6.1RowfsMIRip2NBRUnicastListEntrynot-accessiblecurrentAn entry of fsMIRip2NBRUnicastListTable.
1.3.6.1.4.1.10876.101.1.151.1.6.1.1ColumnfsMIRip2NBRUnicastIpAddrnot-accessiblecurrentIpaddress of the neighbour Router to which unicast update has to be sent
1.3.6.1.4.1.10876.101.1.151.1.6.1.2ColumnfsMIRip2NBRUnicastNBRRowStatusread-writecurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.10876.101.1.151.1.7TablefsMIRip2LocalRouteTablenot-accessiblecurrentThis table contain Local routing table entries
1.3.6.1.4.1.10876.101.1.151.1.7.1RowfsMIRip2LocalRouteEntrynot-accessiblecurrentA list of routes in local routing table
1.3.6.1.4.1.10876.101.1.151.1.7.1.1ColumnfsMIRip2DestNetnot-accessiblecurrentThe IP Address of the destination network
1.3.6.1.4.1.10876.101.1.151.1.7.1.2ColumnfsMIRip2DestMasknot-accessiblecurrentThe Destination mask for the destination network
1.3.6.1.4.1.10876.101.1.151.1.7.1.3ColumnfsMIRip2Tosnot-accessiblecurrentThe value for Rip is always zero
1.3.6.1.4.1.10876.101.1.151.1.7.1.4ColumnfsMIRip2NextHopnot-accessiblecurrentThe The nexthop address to which any datagrams destined to the destination,to be forwarded. (In some special cases)
1.3.6.1.4.1.10876.101.1.151.1.7.1.5ColumnfsMIRip2RtIfIndexread-onlycurrentThe interface through which the route is learnt
1.3.6.1.4.1.10876.101.1.151.1.7.1.6ColumnfsMIRip2RtTyperead-onlycurrentThe value for Rip is always zero
1.3.6.1.4.1.10876.101.1.151.1.7.1.7ColumnfsMIRip2Protoread-onlycurrentThe protocol id == RIP (8 - 1)here
1.3.6.1.4.1.10876.101.1.151.1.7.1.8ColumnfsMIRip2ChgTimeread-onlycurrentThe time when the route is installed
1.3.6.1.4.1.10876.101.1.151.1.7.1.9ColumnfsMIRip2Metricread-onlycurrentThe reachability cost for the destination
1.3.6.1.4.1.10876.101.1.151.1.7.1.10ColumnfsMIRip2RowStatusread-onlycurrentRow status for perticular route entry
1.3.6.1.4.1.10876.101.1.151.1.7.1.11ColumnfsMIRip2Gatewayread-onlycurrentThe gateway address to which any datagrams destined to the destination, to be forwarded
1.3.6.1.4.1.10876.101.1.151.1.8TablefsMIRipAggTablenot-accessiblecurrentThe (conceptual) table listing the router's supernet routes.RIP advertises only supernet routes on the speicified interface. And it suppresses all routes which…
1.3.6.1.4.1.10876.101.1.151.1.8.1RowfsMIRipAggEntrynot-accessiblecurrentAn entry (conceptual row) in the fsMIRipAggTable representing supertnet route for the domain.
1.3.6.1.4.1.10876.101.1.151.1.8.1.1ColumnfsMIRipIfIndexnot-accessiblecurrentThe interface index over which the aggregation is configured.
1.3.6.1.4.1.10876.101.1.151.1.8.1.2ColumnfsMIRipAggAddressnot-accessiblecurrentThe aggregated address which when combined with the corresponding value of fsMIRipAggAddressMask identifies the supernet route for this domain.
1.3.6.1.4.1.10876.101.1.151.1.8.1.3ColumnfsMIRipAggAddressMasknot-accessiblecurrentThe aggregated address mask which when combined with the corresponding value of fsMIRipAggAddress identifies the supernet route for the domain.
1.3.6.1.4.1.10876.101.1.151.1.8.1.4ColumnfsMIRipAggStatusread-writecurrentThe status of this row , by which new entries may be created or old entries deleted from this table
1.3.6.1.4.1.10876.101.1.151.1.9TablefsMIRipCryptoAuthTablenot-accessiblecurrentThe Crypto Authentication table for RIP.
1.3.6.1.4.1.10876.101.1.151.1.9.1RowfsMIRipCryptoAuthEntrynot-accessiblecurrentAn entry in to the Crypto Authentication table. More than one entry can be configured for an interface.
1.3.6.1.4.1.10876.101.1.151.1.9.1.1ColumnfsMIRipCryptoAuthIfIndexnot-accessiblecurrentThe interface index value of the RIP interface.
1.3.6.1.4.1.10876.101.1.151.1.9.1.2ColumnfsMIRipCryptoAuthAddressnot-accessiblecurrentIndicates the IP Address on the interface. Currently this IP Address will be taken as dont-care value since IP Address specific authentication key configuratio…
1.3.6.1.4.1.10876.101.1.151.1.9.1.3ColumnfsMIRipCryptoAuthKeyIdnot-accessiblecurrentThe key ID for this key. This configured KeyID will be sent in the RIP update packet. This object enables the configuration of more than one key for an interfa…
1.3.6.1.4.1.10876.101.1.151.1.9.1.4ColumnfsMIRipCryptoAuthKeyread-writecurrentThe value to be used as the Authentication Key. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the righ…
1.3.6.1.4.1.10876.101.1.151.1.9.1.5ColumnfsMIRipCryptoKeyStartAcceptread-writecurrentThe time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed …
1.3.6.1.4.1.10876.101.1.151.1.9.1.6ColumnfsMIRipCryptoKeyStartGenerateread-writecurrentThe time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 2136-02-06,06:…
1.3.6.1.4.1.10876.101.1.151.1.9.1.7ColumnfsMIRipCryptoKeyStopGenerateread-writecurrentThe time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 2136-02-06,06:2…
1.3.6.1.4.1.10876.101.1.151.1.9.1.8ColumnfsMIRipCryptoKeyStopAcceptread-writecurrentThe time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed a…
1.3.6.1.4.1.10876.101.1.151.1.9.1.9ColumnfsMIRipCryptoKeyStatusread-writecurrentIdentifies the status of key configured on a RIP interface. The value valid indicates that there is a valid keyID configured on the interface. Before the Key i…
1.3.6.1.4.1.10876.101.1.151.2NodefsMIRipRRDGeneralGroup
1.3.6.1.4.1.10876.101.1.151.2.1TablefsMIRipRRDGlobalTablenot-accessiblecurrentThis Table Contains the list of globals for a Context.
1.3.6.1.4.1.10876.101.1.151.2.1.1RowfsMIRipRRDGlobalEntrynot-accessiblecurrentAn entry of fsMIRip2GlobalTable.
1.3.6.1.4.1.10876.101.1.151.2.1.1.1ColumnfsMIRipRRDGlobalStatusread-writecurrentThis MIB object enables / disables RIP to participate in Route Redistribution. If set to enabled then RIP will start advertising the routes learned by other pr…
1.3.6.1.4.1.10876.101.1.151.2.1.1.2ColumnfsMIRipRRDSrcProtoMaskEnableread-writecurrentThis object determines the protocols from which the routes have to be imported to RIP Bit 1, if set indicates the routes have to be imported from the local int…
1.3.6.1.4.1.10876.101.1.151.2.1.1.3ColumnfsMIRipRRDSrcProtoMaskDisableread-writecurrentThis object determines the protocols from which the importing of routes should be stopped to RIP Bit 1, if set indicates the routes have to be imported from th…
1.3.6.1.4.1.10876.101.1.151.2.1.1.4ColumnfsMIRipRRDRouteTagTyperead-writecurrentThe Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the fsMIRipMIR…
1.3.6.1.4.1.10876.101.1.151.2.1.1.5ColumnfsMIRipRRDRouteTagread-writecurrentThe Route Tag in case the user configures a Manual option for the tags .
1.3.6.1.4.1.10876.101.1.151.2.1.1.6ColumnfsMIRipRRDRouteDefMetricread-writecurrentThe default metric to be used for the imported routes from RTM.
1.3.6.1.4.1.10876.101.1.151.2.1.1.7ColumnfsMIRipRRDRouteMapEnableread-writecurrentName Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value.
1.3.6.1.4.1.10876.101.1.151.3NodefsMIripDistInOutRouteMap
1.3.6.1.4.1.10876.101.1.151.3.1TablefsMIRipDistInOutRouteMapTablenot-accessiblecurrentA table describing the configuration of filtering for route map.
1.3.6.1.4.1.10876.101.1.151.3.1.1RowfsMIRipDistInOutRouteMapEntrynot-accessiblecurrentInformation describing the filtering configuration of single entry.
1.3.6.1.4.1.10876.101.1.151.3.1.1.1ColumnfsMIRipDistInOutRouteMapNamenot-accessiblecurrentRoute map name.
1.3.6.1.4.1.10876.101.1.151.3.1.1.2ColumnfsMIRipDistInOutRouteMapTypenot-accessiblecurrentType of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out
1.3.6.1.4.1.10876.101.1.151.3.1.1.3ColumnfsMIRipDistInOutRouteMapValueread-writecurrentDistance value ( this will be unused for distribute list )
1.3.6.1.4.1.10876.101.1.151.3.1.1.4ColumnfsMIRipDistInOutRouteMapRowStatusread-writecurrentThe status of this row, by which new entries may be created, or old entries deleted from this table.
1.3.6.1.4.1.10876.101.1.151.4NodefsMIripPreferenceGroup
1.3.6.1.4.1.10876.101.1.151.4.1TablefsMIRipPreferenceTablenot-accessiblecurrentA table describing preference value for RIP routes.
1.3.6.1.4.1.10876.101.1.151.4.1.1RowfsMIRipPreferenceEntrynot-accessiblecurrentInformation describing preference value of single entry.
1.3.6.1.4.1.10876.101.1.151.4.1.1.1ColumnfsMIRipPreferenceValueread-writecurrentPreference value for RIP routes. Use '0' to set default value
1.3.6.1.4.1.10876.101.1.151.5NodefsMIRip2TrapsControl
1.3.6.1.4.1.10876.101.1.151.5.1ScalarfsMIRip2ContextIdaccessible-for-notifycurrentIdentifies the Rip Domain Context.
1.3.6.1.4.1.10876.101.1.151.5.2ScalarfsMIRipAuthIfIndexaccessible-for-notifycurrentThe interface index value of the RIP interface in which crypto Authentication is enabled.
1.3.6.1.4.1.10876.101.1.151.5.3ScalarfsMIRipAuthKeyIdaccessible-for-notifycurrentThe key ID for this key. This configured KeyID will be sent in the RIP update packet.
1.3.6.1.4.1.10876.101.1.151.5.4ScalarfsMIRipPeerAddressaccessible-for-notifycurrentIndicates the IP Address on the interface. Specifies the Peer IP Address which has sent the RIP update.
1.3.6.1.4.1.10876.101.1.151.6NodefsMIRip2Notification
1.3.6.1.4.1.10876.101.1.151.6.0NodefsMIRip2Traps
1.3.6.1.4.1.10876.101.1.151.6.0.1NotificationfsMIRip2AuthenticationFailurecurrentThe fsMIRip2AuthenticationFailure trap signifies that the RIP Authentication has failed due to invalid key ID, expired key ID received in the RIP update.This t…
1.3.6.1.4.1.10876.101.1.151.6.0.2NotificationfsMIRip2AuthLastKeycurrentThe fsMIRip2AuthLastKey trap signifies that the last key configured on a RIPv2 interface has expired.This trap should be generated when the stop generate time …