SUPERMICRO-MPLS-RSVP-TE-MIB
124 objects
All rights reserved
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.2 | IdentityfsMplsRsvpTeMIB | All rights reserved | ||
| 1.3.6.1.4.1.10876.101.1.2.1 | NodefsMplsRsvpTeObjects | |||
| 1.3.6.1.4.1.10876.101.1.2.1.1 | TablefsMplsRsvpTeIfTable | not-accessible | current | The MPLS-specific attributes of the system's interfaces, over which RSVP Signalling protocol is used for LSP Tunnel establishments. For Practical purposes this… |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1 | RowfsMplsRsvpTeIfEntry | not-accessible | current | The RSVP-specific attributes of a given interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.1 | ColumnfsMplsRsvpTeIfIndex | not-accessible | current | The interface index by which the row in this table is identified. A row is created in this table when a row is created in the rsvpIfTable, and labelled traffic… |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.2 | ColumnfsMplsRsvpTeIfLblSpace | read-create | current | Specifies the type of the interface, as Ethernet, or ATM or FR |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.3 | ColumnfsMplsRsvpTeIfLblType | read-create | current | Specifies the type of the interface, as Ethernet, or ATM or FR. Iface Type as FR is not supported |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.4 | ColumnfsMplsRsvpTeAtmMergeCap | read-create | current | Denotes the Merge Capability of this Interface. VcMerge is currently not supported |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.5 | ColumnfsMplsRsvpTeAtmVcDirection | read-create | current | If the value of this object is 'biDirectional(0)', a given VCI, within a given VPI, is used as a label for both directions independently. If the value of this … |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.6 | ColumnfsMplsRsvpTeAtmMinVpi | read-create | current | The minimum VPI number configured for this range. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.7 | ColumnfsMplsRsvpTeAtmMinVci | read-create | current | The minimum VCI number configured for this range. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.8 | ColumnfsMplsRsvpTeAtmMaxVpi | read-create | current | The maximum VPI number configured for this range. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.9 | ColumnfsMplsRsvpTeAtmMaxVci | read-create | current | The maximum VCI number configured for this range. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.10 | ColumnfsMplsRsvpTeIfMtu | read-create | current | The MTU value associated with this interface . |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.11 | ColumnfsMplsRsvpTeIfUdpNbrs | read-only | current | The number of neighbors perceived to be using only the RSVP UDP Encapsulation. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.12 | ColumnfsMplsRsvpTeIfIpNbrs | read-only | current | The number of neighbors perceived to be using only the RSVP IP Encapsulation. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.13 | ColumnfsMplsRsvpTeIfNbrs | read-only | current | The number of neighbors currently perceived; this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs by the number of neighbors using both encapsulations. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.14 | ColumnfsMplsRsvpTeIfRefreshMultiple | read-create | current | The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshe… |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.15 | ColumnfsMplsRsvpTeIfTTL | read-create | current | The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.16 | ColumnfsMplsRsvpTeIfRefreshInterval | read-create | current | The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.17 | ColumnfsMplsRsvpTeIfRouteDelay | read-create | current | The approximate period from the time a route is changed to the time a resulting message appears on the interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.18 | ColumnfsMplsRsvpTeIfUdpRequired | read-create | current | If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if fsMplsRsvpTeI- fUdpNbrs is not … |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.19 | ColumnfsMplsRsvpTeIfHelloSupported | read-create | current | Indicates whether the interface supports Hello message or not. When set to 'true' the interface is set to support Hello message. The interface will not be set … |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.20 | ColumnfsMplsRsvpTeIfLinkAttr | read-create | current | Link Attributes associated with the interface as defined in section 4.7.4 of RFC 3209, Extensions to RSVP for LSP Tunnels, Awduche et al, December 2001. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.21 | ColumnfsMplsRsvpTeIfStatus | read-create | current | 'active' on interfaces that are configured for RSVP. CreateAndGo is not supported |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.22 | ColumnfsMplsRsvpTeIfPlrId | read-create | current | Indicates the PLR Id to be configured for this interface for supporting FRR Feature. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.23 | ColumnfsMplsRsvpTeIfAvoidNodeId | read-create | current | Indicates the IP Address of the Node to be avoided while protecting this interface for supporting feature. |
| 1.3.6.1.4.1.10876.101.1.2.1.1.1.24 | ColumnfsMplsRsvpTeIfStorageType | read-create | current | The storage type for this conceptual row in the fsMplsRsvpTeIfTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar o… |
| 1.3.6.1.4.1.10876.101.1.2.1.2 | TablefsMplsRsvpTeIfStatsTable | not-accessible | current | This table contains the statistical information associated with an interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1 | RowfsMplsRsvpTeIfStatsEntry | not-accessible | current | This entry contains statistical information of an interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.1 | ColumnfsMplsRsvpTeIfNumTnls | read-only | current | This value specifies the number of tunnels established via this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.2 | ColumnfsMplsRsvpTeIfNumMsgSent | read-only | current | This value specifies the total number of messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.3 | ColumnfsMplsRsvpTeIfNumMsgRcvd | read-only | current | This value specifies the total number of messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.4 | ColumnfsMplsRsvpTeIfNumHelloSent | read-only | current | This value specifies the total number of hello messages plus hello ack messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.5 | ColumnfsMplsRsvpTeIfNumHelloRcvd | read-only | current | This value specifies the total number of hello messages plus hello ack messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.6 | ColumnfsMplsRsvpTeIfNumPathErrSent | read-only | current | This value specifies the total number of Path Error messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.7 | ColumnfsMplsRsvpTeIfNumPathErrRcvd | read-only | current | This value specifies the total number of Path Error messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.8 | ColumnfsMplsRsvpTeIfNumPathTearSent | read-only | current | This value specifies the total number of Path Tear messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.9 | ColumnfsMplsRsvpTeIfNumPathTearRcvd | read-only | current | This value specifies the total number of Path Tear messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.10 | ColumnfsMplsRsvpTeIfNumResvErrSent | read-only | current | This value specifies the total number of Resv Error messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.11 | ColumnfsMplsRsvpTeIfNumResvErrRcvd | read-only | current | This value specifies the total number of Resv Error messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.12 | ColumnfsMplsRsvpTeIfNumResvTearSent | read-only | current | This value specifies the total number of Resv Tear messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.13 | ColumnfsMplsRsvpTeIfNumResvTearRcvd | read-only | current | This value specifies the total number of Resv Tear messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.14 | ColumnfsMplsRsvpTeIfNumResvConfSent | read-only | current | This value specifies the total number of Resv Conf messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.15 | ColumnfsMplsRsvpTeIfNumResvConfRcvd | read-only | current | This value specifies the total number of Resv Conf messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.16 | ColumnfsMplsRsvpTeIfNumBundleMsgSent | read-only | current | This value specifies the total number of Bundle messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.17 | ColumnfsMplsRsvpTeIfNumBundleMsgRcvd | read-only | current | This value specifies the total number of Bundle messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.18 | ColumnfsMplsRsvpTeIfNumSRefreshMsgSent | read-only | current | This value specifies the total number of S-Refresh messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.19 | ColumnfsMplsRsvpTeIfNumSRefreshMsgRcvd | read-only | current | This value specifies the total number of S-Refresh messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.20 | ColumnfsMplsRsvpTeIfNumPathSent | read-only | current | This value specifies the total number of Path messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.21 | ColumnfsMplsRsvpTeIfNumPathRcvd | read-only | current | This value specifies the total number of Path messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.22 | ColumnfsMplsRsvpTeIfNumResvSent | read-only | current | This value specifies the total number of Resv messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.23 | ColumnfsMplsRsvpTeIfNumResvRcvd | read-only | current | This value specifies the total number of Resv messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.24 | ColumnfsMplsRsvpTeIfNumNotifyMsgSent | read-only | current | This value specifies the total number of Notify messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.25 | ColumnfsMplsRsvpTeIfNumNotifyMsgRcvd | read-only | current | This value specifies the total number of Notify messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.26 | ColumnfsMplsRsvpTeIfNumRecoveryPathSent | read-only | current | This value specifies the total number of RecvoveryPath messages sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.27 | ColumnfsMplsRsvpTeIfNumRecoveryPathRcvd | read-only | current | This value specifies the total number of RecoveryPath messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.28 | ColumnfsMplsRsvpTeIfNumPathSentWithRecoveryLbl | read-only | current | This value specifies the total number of Path messages with Recovery label object sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.29 | ColumnfsMplsRsvpTeIfNumPathRcvdWithRecoveryLbl | read-only | current | This value specifies the total number of Path messages with Recovery label object received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.30 | ColumnfsMplsRsvpTeIfNumPathSentWithSuggestedLbl | read-only | current | This value specifies the total number of Path messages with Suggested label object sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.31 | ColumnfsMplsRsvpTeIfNumPathRcvdWithSuggestedLbl | read-only | current | This value specifies the total number of Path messages with Suggested label object received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.32 | ColumnfsMplsRsvpTeIfNumHelloSentWithRestartCap | read-only | current | This value specifies the total number of Hello messages with Restart_Cap object sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.33 | ColumnfsMplsRsvpTeIfNumHelloRcvdWithRestartCap | read-only | current | This value specifies the total number of Hello messages with Restart_Cap object received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.34 | ColumnfsMplsRsvpTeIfNumHelloSentWithCapability | read-only | current | This value specifies the total number of Hello messages with Capability object sent on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.2.1.35 | ColumnfsMplsRsvpTeIfNumHelloRcvdWithCapability | read-only | current | This value specifies the total number of Hello messages with capability object received on this interface. |
| 1.3.6.1.4.1.10876.101.1.2.1.3 | TablefsMplsRsvpTeNbrTable | not-accessible | current | This table contains information about RsvpTe Neighbours known to this node. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1 | RowfsMplsRsvpTeNbrEntry | not-accessible | current | This entry contains information about a single neighbour. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.1 | ColumnfsMplsRsvpTeNbrIfAddr | not-accessible | current | This value specifies the Ip address of the neighbour. This can be router id of the neighbour or address of the interface to which this node is connected. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.2 | ColumnfsMplsRsvpTeNbrRRCapable | read-create | current | This value specifies the RR behaviour of the node towards it's neighbour. Can be enabled only when fsMplsRsvpTeRRCapable is enabled. When enabled it means bund… |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.3 | ColumnfsMplsRsvpTeNbrRRState | read-only | current | This value specifies the actual RR behaviour that is currently being applied to the neighbour. Can be enabled only when fsMplsRsvpTeNbrRRCapable is enabled. Va… |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.4 | ColumnfsMplsRsvpTeNbrRMDCapable | read-create | current | This value specifies whether Reliable Message Delivery is to be performed for messages going to the neighbour. Can be enabled only when fsMplsRsvpTeMsgIdCapabl… |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.5 | ColumnfsMplsRsvpTeNbrEncapsType | read-create | current | This value specifies the Type of Encapsulation Supported by the neighbour. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.6 | ColumnfsMplsRsvpTeNbrHelloSupport | read-create | current | This value specifies whether Hello mechanism is supported for this neighbour or not. Can be enabled only when fsMplsRsvpTeHelloSupprtd is true. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.7 | ColumnfsMplsRsvpTeNbrHelloState | read-only | current | This value specifies the Hello State for the neighbour. Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.8 | ColumnfsMplsRsvpTeNbrHelloRelation | read-only | current | This value specifies the Hello relation between the two neighbours. Active implies that this node will send hello messages. Passive implies that this node will… |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.9 | ColumnfsMplsRsvpTeNbrSrcInstInfo | read-only | current | This value specifies the source instance value of the hello being exchanged between the neighbours. Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.10 | ColumnfsMplsRsvpTeNbrDestInstInfo | read-only | current | This value specifies the destination instance value of the hello being exchanged between the neighbours. Is valid only when fsMplsRsvpTeNbrHelloSupport is enab… |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.11 | ColumnfsMplsRsvpTeNbrCreationTime | read-only | current | This value specifies the time when the neighbour was created. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.12 | ColumnfsMplsRsvpTeNbrLclRprDetectionTime | read-only | current | This value specifies the time when a local repair was detected using Hello Message exchange mechanism |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.13 | ColumnfsMplsRsvpTeNbrNumTunnels | read-only | current | This value specifies the number of tunnels that pass via this neighbour. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.14 | ColumnfsMplsRsvpTeNbrStatus | read-create | current | This value specifies the Status of the Row. Is used to create, modify and/or delete a row in this table. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.15 | ColumnfsMplsRsvpTeNbrGrRecoveryPathCapability | read-only | current | This object indicates whether the neighbor supports RecoveryPath message capability. R bit indicates that the node desire to receive the RecoveryPath message. … |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.16 | ColumnfsMplsRsvpTeNbrGrRestartTime | read-only | current | This value specifies the he restart time interval for the Graceful restart of the neighbor node in seconds |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.17 | ColumnfsMplsRsvpTeNbrGrRecoveryTime | read-only | current | This value specifies the recovery time interval for the Graceful resatart of the neighbor node, after restart in seconds. |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.18 | ColumnfsMplsRsvpTeNbrGrProgressStatus | read-only | current | This object denotes the current State of the neighbor's GR Progress. Following are the different State of neighbor's GR Progress. 1. Not started. 2. Restart in… |
| 1.3.6.1.4.1.10876.101.1.2.1.3.1.19 | ColumnfsMplsRsvpTeNbrStorageType | read-create | current | The storage type for this conceptual row in the fsMplsRsvpTeNbrTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar … |
| 1.3.6.1.4.1.10876.101.1.2.2 | NodefsMplsRsvpTeGenObjects | |||
| 1.3.6.1.4.1.10876.101.1.2.2.1 | ScalarfsMplsRsvpTeLsrID | read-write | current | The LSR's Identifier. This value will be filled in the Extended Tunnel Id field of a Session Object. |
| 1.3.6.1.4.1.10876.101.1.2.2.2 | ScalarfsMplsRsvpTeMaxTnls | read-write | current | The maximum number of TE tunnels supported. |
| 1.3.6.1.4.1.10876.101.1.2.2.3 | ScalarfsMplsRsvpTeMaxErhopsPerTnl | read-write | current | The maximum number of ER-Hops that can be supported in a tunnel. |
| 1.3.6.1.4.1.10876.101.1.2.2.4 | ScalarfsMplsRsvpTeMaxActRoutePerTnl | read-write | current | The maximum number of Actual Routes that can be part of a tunnel. |
| 1.3.6.1.4.1.10876.101.1.2.2.5 | ScalarfsMplsRsvpTeMaxIfaces | read-write | current | The maximum number of Interfaces supported by a router. |
| 1.3.6.1.4.1.10876.101.1.2.2.6 | ScalarfsMplsRsvpTeMaxNbrs | read-write | current | The maximum number of RSVP Neighbours supported by a router. |
| 1.3.6.1.4.1.10876.101.1.2.2.7 | ScalarfsMplsRsvpTeSockSupprtd | read-write | current | Indicates whether Socket based support is needed for the Transmission of RSVP-TE PDU's. When set to 'true' all the outgoing messages will be sent via raw socke… |
| 1.3.6.1.4.1.10876.101.1.2.2.8 | ScalarfsMplsRsvpTeHelloSupprtd | read-write | current | Indicates whether Hello messages to be transmitted from this node. When set to 'true' Hello messages will be sent from this node. For sending the hello message… |
| 1.3.6.1.4.1.10876.101.1.2.2.9 | ScalarfsMplsRsvpTeHelloIntervalTime | read-write | current | This value specifies the time interval for the hello hold timer in milli-seconds. |
| 1.3.6.1.4.1.10876.101.1.2.2.10 | ScalarfsMplsRsvpTeRRCapable | read-write | current | This value specifies whether the node is RR-Capable or not. Value enabled means this node is RR capable and when fsMplsRsvpTeOperStatus is made up, memory for … |
| 1.3.6.1.4.1.10876.101.1.2.2.11 | ScalarfsMplsRsvpTeMsgIdCapable | read-write | current | This value specifies whether the node is Capable of handling and generating message ids. When fsMplsRsvpTeRRCapable is enabled, by default this will be enabled… |
| 1.3.6.1.4.1.10876.101.1.2.2.12 | ScalarfsMplsRsvpTeRMDPolicyObject | read-write | current | This value specifies the messages for which ack desired flag needs to be set. Is valid only when fsMplsRsvpTeMsgIdCapable is enabled. Refresh Messages are not … |
| 1.3.6.1.4.1.10876.101.1.2.2.13 | ScalarfsMplsRsvpTeGenLblSpaceMinLbl | read-write | current | The Minimum value of the label that is associated with the Generic label space. |
| 1.3.6.1.4.1.10876.101.1.2.2.14 | ScalarfsMplsRsvpTeGenLblSpaceMaxLbl | read-write | current | The Maximum value of the label that is associated with the Generic label space. |
| 1.3.6.1.4.1.10876.101.1.2.2.15 | ScalarfsMplsRsvpTeGenDebugFlag | read-write | current | This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the … |
| 1.3.6.1.4.1.10876.101.1.2.2.16 | ScalarfsMplsRsvpTeGenPduDumpLevel | read-write | current | This is a 4-byte (32-bit) object with each bit enabling/ disabling the level of Dump messages. The dump messages can be enabled selectively with respective to … |
| 1.3.6.1.4.1.10876.101.1.2.2.17 | ScalarfsMplsRsvpTeGenPduDumpMsgType | read-write | current | This is a 4-byte (32-bit) object with each bit enabling/ disabling dump of a particular type of message. In the following patterns the bit set to 1 is the bit … |
| 1.3.6.1.4.1.10876.101.1.2.2.18 | ScalarfsMplsRsvpTeGenPduDumpDirection | read-write | current | This is a 4-byte (32-bit) object with each bit enabling/ disabling a the direction of Dump messages. The dump messages can be enabled selectively with respecti… |
| 1.3.6.1.4.1.10876.101.1.2.2.19 | ScalarfsMplsRsvpTeOperStatus | read-write | current | Field indicates the status of the RSVP-TE functionality When the value is set to UP, required memory will be allocated and RSVPTE functionality will be started… |
| 1.3.6.1.4.1.10876.101.1.2.2.20 | ScalarfsMplsRsvpTeOverRideOption | read-write | current | When the value is set to TRUE in an LSR, The LSR interprets a Path Message with out a Diff-serv object as a request for an Lsp with such non-Diff-Serv Quality … |
| 1.3.6.1.4.1.10876.101.1.2.2.21 | ScalarfsMplsRsvpTeMinTnlsWithMsgId | read-write | current | Min number of Tunnels that carry a message id. |
| 1.3.6.1.4.1.10876.101.1.2.2.22 | ScalarfsMplsRsvpTeNotificationEnabled | read-write | current | This object indicates whether Notification on Data Plane failure is enabled or not. Default Value is enable(1). |
| 1.3.6.1.4.1.10876.101.1.2.2.23 | ScalarfsMplsRsvpTeNotifyMsgRetransmitIntvl | read-write | current | This object indicates the retransmission interval in milli-seconds for a Notify Message. |
| 1.3.6.1.4.1.10876.101.1.2.2.24 | ScalarfsMplsRsvpTeNotifyMsgRetransmitDecay | read-write | current | This object indicates the percentage increase in the retransmission interval during retransmission of Notify message when ACK is not received. |
| 1.3.6.1.4.1.10876.101.1.2.2.25 | ScalarfsMplsRsvpTeNotifyMsgRetransmitLimit | read-write | current | This object indicates the maximum number of times a Notify message will be retransmitted when ACK is not received. |
| 1.3.6.1.4.1.10876.101.1.2.2.26 | ScalarfsMplsRsvpTeAdminStatusTimeIntvl | read-write | current | This object indicates the time interval in seconds for which a node will wait to trigger the PathTear Message if the reflected Resv Message is not received. |
| 1.3.6.1.4.1.10876.101.1.2.2.27 | ScalarfsMplsRsvpTePathStateRemovedSupport | read-write | current | This object indicates whether Path State Removal feature is supported or not when a PathErr is received. Value 'enable(1)' indicates this feature is supported.… |
| 1.3.6.1.4.1.10876.101.1.2.2.28 | ScalarfsMplsRsvpTeLabelSetEnabled | read-write | current | This object indicates whether this node is capable of sending Label Set Object in Path message. Default value is 'disable(2)'. |
| 1.3.6.1.4.1.10876.101.1.2.2.29 | ScalarfsMplsRsvpTeAdminStatusCapability | read-write | current | This object indicates whether this node is capable of processing and sending Admin status object in Path message. Default value is 'false(2)'. |
| 1.3.6.1.4.1.10876.101.1.2.2.30 | ScalarfsMplsRsvpTeGrCapability | read-write | current | This object is used to enable or disable Graceful Restart support and Helper support for RSVPTE none (1)- GR is not supported (Default value) full (2)- GR is f… |
| 1.3.6.1.4.1.10876.101.1.2.2.31 | ScalarfsMplsRsvpTeGrRecoveryPathCapability | read-write | current | This object is used to enable RecoveryPath message capability. recoveryPathReceive bit indicates that the node desire to receive the RecoveryPath message. reco… |
| 1.3.6.1.4.1.10876.101.1.2.2.32 | ScalarfsMplsRsvpTeGrRestartTime | read-write | current | This value specifies the restart time interval for the Graceful restart of RSVP-TE component in seconds. The default value is 120 seconds. The acceptable range… |
| 1.3.6.1.4.1.10876.101.1.2.2.33 | ScalarfsMplsRsvpTeGrRecoveryTime | read-write | current | This value specifies the recovery time interval for the Graceful restart of RSVP-TE component, after restart in seconds. The default value is 120 seconds. The … |
| 1.3.6.1.4.1.10876.101.1.2.2.34 | ScalarfsMplsRsvpTeGrProgressStatus | read-only | current | This object denotes the current State of the Node's GR Progress. Following are the different State of GR in the Node. 1. Not started. 2. GR shutdown in progres… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmVcIdentifier | Integer32 (0..65535) | current | The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. |
| AtmVpIdentifier | Integer32 (0..4095) | current | The VPI value for a VPL. The value VPI=0 is not used for a VPL not associated with a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 1 to 255. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255.… |
| MplsLsrIdentifier | OCTET STRING (SIZE (4)) | current | The Label Switch Router (LSR) identifier is the first 4 bytes or the IP Address component of the Resource Resevation Protocol (RSVP-TE) identifier. |