SUPERMICRO-MPTUNNEL-MIB
26 objects
The MIB module for management of IP (IPv4 and IPv6) Tunnels, independent of the specific encapsulation scheme in use.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| SUPERMICRO-MISTD-IPVX-MIB | fsMIStdIpContextId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.39 | IdentityfsMITunlMIB | The MIB module for management of IP (IPv4 and IPv6) Tunnels, independent of the specific encapsulation scheme in use. | ||
| 1.3.6.1.4.1.10876.101.2.39.1 | NodefsMITunlMIBObjects | |||
| 1.3.6.1.4.1.10876.101.2.39.1.1 | NodefsMITunl | |||
| 1.3.6.1.4.1.10876.101.2.39.1.1.1 | TablefsMITunlIfTable | not-accessible | current | The (conceptual) table containing virtual router specific information on configured tunnels. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1 | RowfsMITunlIfEntry | not-accessible | current | The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. I… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.1 | ColumnfsMITunlIfAddressType | not-accessible | current | The type of address in the corresponding fsMITunlIfLocalInetAddress and fsMITunlIfRemoteInetAddress objects. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.2 | ColumnfsMITunlIfLocalInetAddress | not-accessible | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.3 | ColumnfsMITunlIfRemoteInetAddress | not-accessible | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a … |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.4 | ColumnfsMITunlIfEncapsMethod | not-accessible | current | The encapsulation method used by the tunnel. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.5 | ColumnfsMITunlIfConfigID | not-accessible | current | An identifier used to distinguish between multiple tunnels of the same encapsulation method, with the same endpoints. If the encapsulation protocol only allows… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.6 | ColumnfsMITunlIfHopLimit | read-write | current | The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.7 | ColumnfsMITunlIfSecurity | read-only | current | The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or en… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.8 | ColumnfsMITunlIfTOS | read-write | current | The method used to set the high 6 bits of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the … |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.9 | ColumnfsMITunlIfFlowLabel | read-write | current | The method used to set the IPv6 Flow Label value. This object need not be present in rows where fsMITunlIfAddressType indicates the tunnel is over IPv6. A valu… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.10 | ColumnfsMITunlIfMTU | read-only | current | Configured MTU of the specific tunnel entry. If set as 0, the outgoing Link MTU will be used. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.11 | ColumnfsMITunlIfDirFlag | read-write | current | Flag defining whether the configured tunnel is unidirectional or bi-directional. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.12 | ColumnfsMITunlIfDirection | read-write | current | Flag defining whether the uni-directional tunnel configured is incoming or out going. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.13 | ColumnfsMITunlIfEncaplmt | read-write | current | The limit on how many further levels of nesting a tunnel packet is permitted to undergo - not counting the encapsulation in which the option itself is containe… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.14 | ColumnfsMITunlIfEncapOption | read-write | current | Flag indicating if Encapsulation option needs to be added or not in a tunnelled packet. |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.15 | ColumnfsMITunlIfIndex | read-only | current | If the value of fsMITunlIfStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is … |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.16 | ColumnfsMITunlIfAlias | read-write | current | If the value of fsMITunlIfStatus for this row is active, then this object contains the value of ifAlias corresponding to the tunnel interface. The value of fsM… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.17 | ColumnfsMITunlIfCksumFlag | read-write | current | Flag indicating if checksum needs to be set in GRE header for GRE encapsulation type |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.18 | ColumnfsMITunlIfPmtuFlag | read-write | current | Flag indicating if path-mtu-discovery needs to be enabled on the tunnel interface. When enabled, path-mtu-discovery is done to set the MTU of the tunnel interf… |
| 1.3.6.1.4.1.10876.101.2.39.1.1.1.1.19 | ColumnfsMITunlIfStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. To create a row in this table for an encapsulation method … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FsIPv6FlowLabelOrAny | Integer32 (-1 | 0..1048575) | current | The flow identifier or Flow Label in an IPv6 packet header that may be used to discriminate traffic flows. The value of -1 is used to indicate a wildcard, i.e. any value. |
| FsMITunlType | INTEGER { other(1), direct(2), gre(3), minimal(4), l2tp(5), pptp(6), l2f(7), udp(8), atmp(9), msdp(10), sixToFour(11), sixOverFour(12), isatap(13), teredo(14), compat(15), ipv6ip(16) } | current | The encapsulation method used by a tunnel. The value direct indicates that a packet is encapsulated directly within a normal IP header, with no intermediate header, and unicast to the remote tunnel endpoint (e.g., an RF… |