SUPERMICRO-OSPF-TE-MIB
66 objects
All rights reserved
Imported Objects
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.72 | IdentityfutOspfTe | All rights reserved | ||
| 1.3.6.1.4.1.10876.101.1.72.1 | NodefutOspfTeGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.72.1.1 | ScalarfutOspfTeAdminStatus | read-write | current | Indicates whether the router supports OSPF-TE or not. It has a pre-requisite condition .i.e Only an Opaque Capable Router can set this object as enabled. |
| 1.3.6.1.4.1.10876.101.1.72.1.2 | ScalarfutOspfTeTraceLevel | read-write | current | |
| 1.3.6.1.4.1.10876.101.1.72.1.3 | ScalarfutOspfTeCspfRunCnt | read-only | current | This gives the total number of times CSPF computation was performed |
| 1.3.6.1.4.1.10876.101.1.72.2 | TablefutOspfTeLsdbTable | not-accessible | current | The OSPF-TE Process's Link State Database containing Router LSA, Network LSA , Type 10 Opaque LSA which holds Router Adrress TLVs and Link TLVs. This TE databa… |
| 1.3.6.1.4.1.10876.101.1.72.2.1 | RowfutOspfTeLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.1.72.2.1.1 | ColumnfutOspfTeLsdbAreaId | not-accessible | current | The 32 bit identifier of the Area from which the LSA was received or originated. |
| 1.3.6.1.4.1.10876.101.1.72.2.1.2 | ColumnfutOspfTeLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.10876.101.1.72.2.1.3 | ColumnfutOspfTeLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field that identifies the piece of the routing domain that is being described by the advertisement for Router and Netw… |
| 1.3.6.1.4.1.10876.101.1.72.2.1.4 | ColumnfutOspfTeLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.1.72.2.1.5 | ColumnfutOspfTeLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.1.72.2.1.6 | ColumnfutOspfTeLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.1.72.3 | TablefutOspfTeType9LsdbTable | not-accessible | current | The OSPF-TE database Type 9 LSAs. |
| 1.3.6.1.4.1.10876.101.1.72.3.1 | RowfutOspfTeType9LsdbEntry | not-accessible | current | A single Type 9 TE LSA. |
| 1.3.6.1.4.1.10876.101.1.72.3.1.1 | ColumnfutOspfTeType9LsdbIfIpAddress | not-accessible | current | Interface Index associated with the Interface |
| 1.3.6.1.4.1.10876.101.1.72.3.1.2 | ColumnfutOspfTeType9LsdbIfIndex | not-accessible | current | Interface Index associated with the Interface |
| 1.3.6.1.4.1.10876.101.1.72.3.1.3 | ColumnfutOspfTeType9LsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing the Opaque Type and Opaque ID. |
| 1.3.6.1.4.1.10876.101.1.72.3.1.4 | ColumnfutOspfTeType9LsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.1.72.3.1.5 | ColumnfutOspfTeType9LsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.1.72.3.1.6 | ColumnfutOspfTeType9LsdbAdvertisement | read-only | current | The entire TYPE9 Opaque Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.1.72.4 | TablefutOspfTeAreaTable | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.1.72.4.1 | RowfutOspfTeAreaEntry | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.1.72.4.1.1 | ColumnfutOspfTeAreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.10876.101.1.72.4.1.2 | ColumnfutOspfTeAreaLsaCount | read-only | current | This gives the count of how many LSAs attached to this area only type 10 and type 2. |
| 1.3.6.1.4.1.10876.101.1.72.4.1.3 | ColumnfutOspfTeType10AreaCksumSum | read-only | current | This gives the sum of TE LSA check sum installed in the TE Data base associated with this area. |
| 1.3.6.1.4.1.10876.101.1.72.4.1.4 | ColumnfutOspfTeType2AreaCksumSum | read-only | current | This gives the sum of Network LSA check sum installed in the TE Data base associated with this area. |
| 1.3.6.1.4.1.10876.101.1.72.5 | TablefutOspfTeIfTable | not-accessible | current | The OSPF-TE Interface Table describes the TE information associated with the interfaces. |
| 1.3.6.1.4.1.10876.101.1.72.5.1 | RowfutOspfTeIfEntry | not-accessible | current | The OSPF-TE Interface Entry describes TE information associated with the interface |
| 1.3.6.1.4.1.10876.101.1.72.5.1.1 | ColumnfutOspfTeIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.72.5.1.2 | ColumnfutOspfTeAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.72.5.1.3 | ColumnfutOspfTeIfAreaId | read-only | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.10876.101.1.72.5.1.4 | ColumnfutOspfTeIfType | read-only | current | The OSPF/OSPF-TE interface type. |
| 1.3.6.1.4.1.10876.101.1.72.5.1.5 | ColumnfutOspfTeIfMetric | read-only | current | TE Metric associated with the link |
| 1.3.6.1.4.1.10876.101.1.72.5.1.6 | ColumnfutOspfTeIfMaxBw | read-only | current | The Maximum Bandwidth specifies the maximum bandwidth that can be used on this link in this direction (From the router originating the LSA to its neighbor) |
| 1.3.6.1.4.1.10876.101.1.72.5.1.7 | ColumnfutOspfTeIfMaxReservBw | read-only | current | The Maximum Reservable Bandwidth specifies the maximum bandwidth that may be reserved on this link in this direction |
| 1.3.6.1.4.1.10876.101.1.72.5.1.8 | ColumnfutOspfTeIfRsrcClassColor | read-only | current | The Resource Class/Color specifies administrative group membership for this link, in terms of a bit mask (0-31) |
| 1.3.6.1.4.1.10876.101.1.72.5.1.9 | ColumnfutOspfTeIfOperStat | read-only | current | This gives the status of the interface. It would be in 'invalid' state if TE information not present. It would be in 'notInService' state if TE information is … |
| 1.3.6.1.4.1.10876.101.1.72.5.1.10 | ColumnfutOspfTeIfLinkId | read-only | current | A 32-bit integer (represented as a type IpAd- dress) If Interface Type is PtoP this is neighbour router Id and if Interface type is multi-access than this is i… |
| 1.3.6.1.4.1.10876.101.1.72.5.1.11 | ColumnfutOspfTeIfRemoteIpAddr | read-only | current | The remote IP address associated with the TE link ( numbered links). For an unnumbered link, the remote address is of type unknown and this object should be th… |
| 1.3.6.1.4.1.10876.101.1.72.5.1.12 | ColumnfutOspfTeIfProtectionType | read-only | current | This attribute specifies link protection type of the TE link. Description of the different protection types can be found in the 'Routing Extensions in Support … |
| 1.3.6.1.4.1.10876.101.1.72.5.1.13 | ColumnfutOspfTeIfSrlg | read-only | current | This gives list of SRLG values associated with this interface. |
| 1.3.6.1.4.1.10876.101.1.72.6 | TablefutOspfTeIfDescriptorTable | not-accessible | current | This table specifies the Interface descriptors associated with the Interface |
| 1.3.6.1.4.1.10876.101.1.72.6.1 | RowfutOspfTeIfDescriptorEntry | not-accessible | current | An entry in this table is for Interface descriptor. |
| 1.3.6.1.4.1.10876.101.1.72.6.1.1 | ColumnfutOspfTeIfDescrIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.72.6.1.2 | ColumnfutOspfTeIfDescrAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.72.6.1.3 | ColumnfutOspfTeIfDescrId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.4.1.10876.101.1.72.6.1.4 | ColumnfutOspfTeIfDescrSwithingCap | read-only | current | This attribute specifies the Switching Capability. |
| 1.3.6.1.4.1.10876.101.1.72.6.1.5 | ColumnfutOspfTeIfDescrEncodingType | read-only | current | This attribute specifies the TE link encoding type. |
| 1.3.6.1.4.1.10876.101.1.72.6.1.6 | ColumnfutOspfTeIfDescrMinLSPBandwidth | read-only | current | This attribute specifies the minimum reservable bandwidth on the TE link. This is derived from the union of the minimum reservable bandwidth of all the compone… |
| 1.3.6.1.4.1.10876.101.1.72.6.1.7 | ColumnfutOspfTeIfDescrMTU | read-only | current | This attribute specifies Interface MTU size |
| 1.3.6.1.4.1.10876.101.1.72.6.1.8 | ColumnfutOspfTeIfDescrIndication | read-only | current | This attribute specifies whether the interface support standard or Arbitray SONET/SDH |
| 1.3.6.1.4.1.10876.101.1.72.7 | TablefutOspfTeIfSwDescrMaxBwTable | not-accessible | current | This table specifies the link descriptors associated with the TE links. |
| 1.3.6.1.4.1.10876.101.1.72.7.1 | RowfutOspfTeIfSwDescrMaxBwEntry | not-accessible | current | An entry in this table is created for every TE link descriptor. An ifEntry in the ifTable must exist before a futOspfTeIfDescriptorEntry using the same ifIndex… |
| 1.3.6.1.4.1.10876.101.1.72.7.1.1 | ColumnfutOspfTeIfSwDescrMaxBwPriority | not-accessible | current | This value indiates the priority of the band width |
| 1.3.6.1.4.1.10876.101.1.72.7.1.2 | ColumnfutOspfTeIfSwDescrMaxLSPBandwidth | read-only | current | This attribute specifies the minimum reservable bandwidth on the TE link. This is derived from the union of the minimum reservable bandwidth of all the compone… |
| 1.3.6.1.4.1.10876.101.1.72.8 | TablefutOspfTeIfBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth table for TE links. |
| 1.3.6.1.4.1.10876.101.1.72.8.1 | RowfutOspfTeIfBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth of TE links. An ifEntry in the ifTable must exist before a futOspfTeIfBandwidthE… |
| 1.3.6.1.4.1.10876.101.1.72.8.1.1 | ColumnfutOspfTeIfBandwidthPriority | not-accessible | current | This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering Extensions to OSPF Version 2' document. |
| 1.3.6.1.4.1.10876.101.1.72.8.1.2 | ColumnfutOspfTeIfUnreservedBandwidth | read-only | current | This attribute specifies the TE link unreserved bandwidth at priority p. It is the sum of the unreserved bandwidths at priority p of all component links associ… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AreaID | IpAddress | current | An OSPF Area Identifier. |
| BandWidth | Counter64 | current | Bandwidth in thousand bps |
| InterfaceIndex | Integer32 | current | The range of ifIndex. |
| RouterID | IpAddress | current | A OSPF Router Identifier. |
| TeLinkEncodingType | INTEGER { packet(1), ethernet(2), ansiEtsiPdh(3), sdhItuSonetAnsi(5), digitalWrapper(7), lambda(8), fiber(9), fiberChannel(11) } | current | Link encoding type as specified in 'GMPLS Signaling Functional Description' document. The values specified in this document are not contiguous. |
| TeLinkPriority | Integer32 (0..7) | current | This type is used to represent a priority. Each connection is assigned a priority. This priority is used when accounting for bandwidth on TE links or component links, for resource allocation and for rerouting purposes. … |