SUPERMICRO-OSPFMI-MIB
255 objects
The Proprietary OSPFMI MIB
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| SUPERMICRO-MISTDOSPF-MIB | AreaID BigMetric fsMIStdOspfContextId fsMIStdOspfEntry fsMIStdOspfNbrRtrId fsMIStdOspfRouterId fsMIStdOspfVirtNbrEntry PositiveInteger RouterID Status TOSType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.145 | IdentityfsMIOspf | The Proprietary OSPFMI MIB | ||
| 1.3.6.1.4.1.10876.101.1.145.1 | NodefsMIOspfGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.145.1.1 | ScalarfsMIOspfGlobalTraceLevel | read-write | current | This is the global trace and not specific to any context |
| 1.3.6.1.4.1.10876.101.1.145.1.2 | ScalarfsMIOspfVrfSpfInterval | read-write | current | Minimum time between two consecutive SPF calculations across two ospf instances. Time is configured in milli seconds. |
| 1.3.6.1.4.1.10876.101.1.145.1.3 | TablefsMIOspfTable | not-accessible | current | Table to store different context specific ospf parameters |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1 | RowfsMIOspfEntry | not-accessible | current | Each entry has routing information |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.1 | ColumnfsMIOspfOverFlowState | read-only | current | Indicates whether router is in overflow state or not. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.2 | ColumnfsMIOspfPktsRcvd | read-only | current | This gives the Total no. of Packets received. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.3 | ColumnfsMIOspfPktsTxed | read-only | current | This gives the Total no. of Packets Transmitted. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.4 | ColumnfsMIOspfPktsDisd | read-only | current | This gives the Total no. of Packets Discarded. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.5 | ColumnfsMIOspfRFC1583Compatibility | read-write | current | Controls the preference rules, when chossing among multiple AS external LSAs advertising the same destination. When set to enabled, the preference rules remain… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.12 | ColumnfsMIOspfTraceLevel | read-write | current | |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.13 | ColumnfsMIOspfMinLsaInterval | read-write | current | The minimum time between distinct originations of any particular LSA. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.14 | ColumnfsMIOspfABRType | read-write | current | Different Types of ABRs supported |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.15 | ColumnfsMIOspfNssaAsbrDefRtTrans | read-write | current | Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.16 | ColumnfsMIOspfDefaultPassiveInterface | read-write | current | When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.17 | ColumnfsMIOspfSpfHoldtime | read-write | current | Minimum time between two consecutive SPF calculations in one ospf instances. Time is configured in milli seconds |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.18 | ColumnfsMIOspfSpfDelay | read-write | current | The Delay at which routing calculation is carried after a topology change in one ospf instance. Time is configured in milli seconds |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.19 | ColumnfsMIOspfRestartSupport | read-write | current | The router.s support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.20 | ColumnfsMIOspfRestartInterval | read-write | current | Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.21 | ColumnfsMIOspfRestartStrictLsaChecking | read-write | current | Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile … |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.22 | ColumnfsMIOspfRestartStatus | read-only | current | Current status of OSPF graceful restart. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.23 | ColumnfsMIOspfRestartAge | read-only | current | Remaining time in current OSPF graceful restart interval. |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.24 | ColumnfsMIOspfRestartExitReason | read-only | current | Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a res… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.25 | ColumnfsMIOspfHelperSupport | read-write | current | The router.s helper support for OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. fsMIOspfHelperSupport is in… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.26 | ColumnfsMIOspfExtTraceLevel | read-write | current | |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.27 | ColumnfsMIOspfHelperGraceTimeLimit | read-write | current | Configured OSPF graceful restart interval limit in helper side. Time is configured in seconds This object is persistent and when written the entity SHOULD save… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.28 | ColumnfsMIOspfRestartAckState | read-write | current | Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and whe… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.29 | ColumnfsMIOspfGraceLsaRetransmitCount | read-write | current | Number of retransmissions for unacknowledged GraceLSAs |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.30 | ColumnfsMIOspfRestartReason | read-write | current | The router.s restarter reason code of OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is persis… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.31 | ColumnfsMIOspfRTStaggeringInterval | read-write | current | This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPF operations.Default value of this … |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.32 | ColumnfsMIOspfRouterIdPermanence | read-write | current | This variable displays the status of the ospfRouterId. 'dynamic' and 'permanent' refer to how the ospfRouterId is derived. This object is used to save and rest… |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.33 | ColumnfsMIOspfBfdStatus | read-write | current | This object is to enable/disable BFD feature in OSPF.By default is enabled. If it is disabled OSPF will not register with BFD for neighbor IP path monitoring |
| 1.3.6.1.4.1.10876.101.1.145.1.3.1.34 | ColumnfsMIOspfBfdAllIfState | read-write | current | This object is to enable/disable BFD for all OSPF interfaces By default it is disabled. If it is enabled, OSPF will register with BFD for neighbor IP path moni… |
| 1.3.6.1.4.1.10876.101.1.145.1.4 | ScalarfsMIOspfRTStaggeringStatus | read-write | current | This object indicates the status of route table calculation staggering option |
| 1.3.6.1.4.1.10876.101.1.145.1.5 | ScalarfsMIOspfHotStandbyAdminStatus | read-only | current | High Availabilty feature enabled or disabled in OSPF |
| 1.3.6.1.4.1.10876.101.1.145.1.6 | ScalarfsMIOspfHotStandbyState | read-only | current | Internal State of the OSPF instance. init(1) implies that the OSPF instance is up, but is unaware of the status of its peer. activeStandbyUp(2) implies that th… |
| 1.3.6.1.4.1.10876.101.1.145.1.7 | ScalarfsMIOspfDynamicBulkUpdStatus | read-only | current | Status of dynamic bulk update between active and dynamic OSPF instance. |
| 1.3.6.1.4.1.10876.101.1.145.1.8 | ScalarfsMIOspfStanbyHelloSyncCount | read-only | current | Total number of hello packets synced to standby node. |
| 1.3.6.1.4.1.10876.101.1.145.1.9 | ScalarfsMIOspfStanbyLsaSyncCount | read-only | current | Total number of LSAs synced to standby node. |
| 1.3.6.1.4.1.10876.101.1.145.1.10 | ScalarfsMIOspfGlobalExtTraceLevel | read-write | current | This is the global trace for OSPF Extension and not specific to any context |
| 1.3.6.1.4.1.10876.101.1.145.2 | TablefsMIOspfAreaTable | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.1.145.2.1 | RowfsMIOspfAreaEntry | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.1.145.2.1.1 | ColumnfsMIOspfAreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.10876.101.1.145.2.1.2 | ColumnfsMIOspfAreaIfCount | read-only | current | This gives the Total no. of Ifaces in the Area |
| 1.3.6.1.4.1.10876.101.1.145.2.1.3 | ColumnfsMIOspfAreaNetCount | read-only | current | This gives the Total no. of Networks in the Area. |
| 1.3.6.1.4.1.10876.101.1.145.2.1.4 | ColumnfsMIOspfAreaRtrCount | read-only | current | This gives the Total no. of Routers in the Area. |
| 1.3.6.1.4.1.10876.101.1.145.2.1.5 | ColumnfsMIOspfAreaNSSATranslatorRole | read-create | current | Indicate's an NSSA Border router's ability to perform NSSA Translation of Type-7 LSAs to Type-5 LSAs. |
| 1.3.6.1.4.1.10876.101.1.145.2.1.6 | ColumnfsMIOspfAreaNSSATranslatorState | read-only | current | Indicate's if and how an NSSA Border router is performing NSSA translation of Type-7 to into Type-5 LSAs.When this object is set to enabled, the NSSA border ro… |
| 1.3.6.1.4.1.10876.101.1.145.2.1.7 | ColumnfsMIOspfAreaNSSATranslatorStabilityInterval | read-create | current | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| 1.3.6.1.4.1.10876.101.1.145.2.1.8 | ColumnfsMIOspfAreaNSSATranslatorEvents | read-only | current | Indicates the number of translator state changes that have occured since the last boot-up. |
| 1.3.6.1.4.1.10876.101.1.145.2.1.9 | ColumnfsMIOspfAreaDfInfOriginate | read-create | current | Indicates the generation default Type-7 LSA. |
| 1.3.6.1.4.1.10876.101.1.145.3 | TablefsMIOspfHostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.10876.101.1.145.3.1 | RowfsMIOspfHostEntry | not-accessible | current | A metric to be advertised, for a given type of service, when a given host is reachable. |
| 1.3.6.1.4.1.10876.101.1.145.3.1.1 | ColumnfsMIOspfHostIpAddress | not-accessible | current | The IP Address of the Host. |
| 1.3.6.1.4.1.10876.101.1.145.3.1.2 | ColumnfsMIOspfHostTOS | not-accessible | current | The Type of Service of the route being configured. |
| 1.3.6.1.4.1.10876.101.1.145.3.1.3 | ColumnfsMIOspfHostRouteIfIndex | read-write | current | The Interface to reach the host |
| 1.3.6.1.4.1.10876.101.1.145.4 | TablefsMIOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.145.4.1 | RowfsMIOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.1 | ColumnfsMIOspfIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.2 | ColumnfsMIOspfAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.145.4.1.3 | ColumnfsMIOspfIfOperState | read-only | current | This gives the Operational Status of the Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.4 | ColumnfsMIOspfIfPassive | read-write | current | This object is used to make the inteface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal |
| 1.3.6.1.4.1.10876.101.1.145.4.1.5 | ColumnfsMIOspfIfNbrCount | read-only | current | This gives the Total number of Neighbour's through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.6 | ColumnfsMIOspfIfAdjCount | read-only | current | This gives the Total number of Adjacencies through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.7 | ColumnfsMIOspfIfHelloRcvd | read-only | current | This gives the Total number of Hello packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.8 | ColumnfsMIOspfIfHelloTxed | read-only | current | This gives the Total number of Hello packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.9 | ColumnfsMIOspfIfHelloDisd | read-only | current | This gives the Total number of Hello packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.10 | ColumnfsMIOspfIfDdpRcvd | read-only | current | This gives the Total number of Ddp packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.11 | ColumnfsMIOspfIfDdpTxed | read-only | current | This gives the Total number of Ddp packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.12 | ColumnfsMIOspfIfDdpDisd | read-only | current | This gives the Total number of Ddp packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.13 | ColumnfsMIOspfIfLrqRcvd | read-only | current | This gives the Total number of Lrq packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.14 | ColumnfsMIOspfIfLrqTxed | read-only | current | This gives the Total number of Lrq packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.15 | ColumnfsMIOspfIfLrqDisd | read-only | current | This gives the Total number of Lrq packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.16 | ColumnfsMIOspfIfLsuRcvd | read-only | current | This gives the Total number of Lsu packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.17 | ColumnfsMIOspfIfLsuTxed | read-only | current | This gives the Total number of Lsu packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.18 | ColumnfsMIOspfIfLsuDisd | read-only | current | This gives the Total number of Lsu packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.19 | ColumnfsMIOspfIfLakRcvd | read-only | current | This gives the Total number of Lak packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.20 | ColumnfsMIOspfIfLakTxed | read-only | current | This gives the Total number of Lak packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.21 | ColumnfsMIOspfIfLakDisd | read-only | current | This gives the Total number of Lak packets discarded on that Interface. |
| 1.3.6.1.4.1.10876.101.1.145.4.1.22 | ColumnfsMIOspfIfBfdState | read-write | current | This object is to enable/disable BFD in a specific OSPF interface. By default it is disabled. But when fsMIOspfBfdAllIfState is enabled, internally this object… |
| 1.3.6.1.4.1.10876.101.1.145.5 | TablefsMIOspfIfMD5AuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.145.5.1 | RowfsMIOspfIfMD5AuthEntry | not-accessible | current | The OSPF Interface MD5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.145.5.1.1 | ColumnfsMIOspfIfMD5AuthIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.145.5.1.2 | ColumnfsMIOspfIfMD5AuthAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.145.5.1.3 | ColumnfsMIOspfIfMD5AuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.5.1.4 | ColumnfsMIOspfIfMD5AuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.5.1.5 | ColumnfsMIOspfIfMD5AuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key. The value shown will be configured time + system time at which the value… |
| 1.3.6.1.4.1.10876.101.1.145.5.1.6 | ColumnfsMIOspfIfMD5AuthKeyStartGenerate | read-write | current | The time the router will start using this key for packets generation.The value shown will be configured time + system time at which the value is configured. |
| 1.3.6.1.4.1.10876.101.1.145.5.1.7 | ColumnfsMIOspfIfMD5AuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system … |
| 1.3.6.1.4.1.10876.101.1.145.5.1.8 | ColumnfsMIOspfIfMD5AuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime.The value shown will be configur… |
| 1.3.6.1.4.1.10876.101.1.145.5.1.9 | ColumnfsMIOspfIfMD5AuthKeyStatus | read-write | current | Identifies the status of the key. NOTE:invalid (2) currently not supported |
| 1.3.6.1.4.1.10876.101.1.145.6 | TablefsMIOspfVirtIfMD5AuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.145.6.1 | RowfsMIOspfVirtIfMD5AuthEntry | not-accessible | current | The OSPF Interface MD5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.145.6.1.1 | ColumnfsMIOspfVirtIfMD5AuthAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0. |
| 1.3.6.1.4.1.10876.101.1.145.6.1.2 | ColumnfsMIOspfVirtIfMD5AuthNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.6.1.3 | ColumnfsMIOspfVirtIfMD5AuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.6.1.4 | ColumnfsMIOspfVirtIfMD5AuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.6.1.5 | ColumnfsMIOspfVirtIfMD5AuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key.The value shown will be configured time + system time at which the value … |
| 1.3.6.1.4.1.10876.101.1.145.6.1.6 | ColumnfsMIOspfVirtIfMD5AuthKeyStartGenerate | read-write | current | The time the router will start using this key for packet generation.The value shown will be configured time + system time at which the value is configured. |
| 1.3.6.1.4.1.10876.101.1.145.6.1.7 | ColumnfsMIOspfVirtIfMD5AuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system … |
| 1.3.6.1.4.1.10876.101.1.145.6.1.8 | ColumnfsMIOspfVirtIfMD5AuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime. The value shown will be configu… |
| 1.3.6.1.4.1.10876.101.1.145.6.1.9 | ColumnfsMIOspfVirtIfMD5AuthKeyStatus | read-write | current | Identifies the status of the key. NOTE: invalid (2) is currently not supported |
| 1.3.6.1.4.1.10876.101.1.145.7 | TablefsMIOspfNbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.1.145.7.1 | RowfsMIOspfNbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.7.1.1 | ColumnfsMIOspfNbrIpAddr | not-accessible | current | The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the … |
| 1.3.6.1.4.1.10876.101.1.145.7.1.2 | ColumnfsMIOspfNbrAddressLessIndex | not-accessible | current | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.4.1.10876.101.1.145.7.1.3 | ColumnfsMIOspfNbrDBSummaryQLen | read-only | current | This gives the Que Length of the Database summary List . |
| 1.3.6.1.4.1.10876.101.1.145.7.1.4 | ColumnfsMIOspfNbrLSReqQLen | read-only | current | This gives the Length of Link State Request Que . |
| 1.3.6.1.4.1.10876.101.1.145.7.1.5 | ColumnfsMIOspfNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.7.1.6 | ColumnfsMIOspfNbrRestartHelperAge | read-only | current | Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.7.1.7 | ColumnfsMIOspfNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.7.1.8 | ColumnfsMIOspfNbrBfdState | read-only | current | This is a read-only object. This will be enabled internally only when BFD is enabled for monitoring this neighbor IP path. |
| 1.3.6.1.4.1.10876.101.1.145.8 | TablefsMIOspfRoutingTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.10876.101.1.145.8.1 | RowfsMIOspfRoutingEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.10876.101.1.145.8.1.1 | ColumnfsMIOspfRouteIpAddr | not-accessible | current | IP Address of the route |
| 1.3.6.1.4.1.10876.101.1.145.8.1.2 | ColumnfsMIOspfRouteIpAddrMask | not-accessible | current | IP Address Mask of the route |
| 1.3.6.1.4.1.10876.101.1.145.8.1.3 | ColumnfsMIOspfRouteIpTos | not-accessible | current | IP TOS of the route |
| 1.3.6.1.4.1.10876.101.1.145.8.1.4 | ColumnfsMIOspfRouteIpNextHop | not-accessible | current | IP Next Hop of the route |
| 1.3.6.1.4.1.10876.101.1.145.8.1.5 | ColumnfsMIOspfRouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.10876.101.1.145.8.1.6 | ColumnfsMIOspfRouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.10876.101.1.145.8.1.7 | ColumnfsMIOspfRouteCost | read-only | current | It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost… |
| 1.3.6.1.4.1.10876.101.1.145.8.1.8 | ColumnfsMIOspfRouteType2Cost | read-only | current | Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS i… |
| 1.3.6.1.4.1.10876.101.1.145.8.1.9 | ColumnfsMIOspfRouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.10876.101.1.145.9 | TablefsMIOspfSecIfTable | not-accessible | current | A table of Secondary IP Address information. |
| 1.3.6.1.4.1.10876.101.1.145.9.1 | RowfsMIOspfSecIfEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.10876.101.1.145.9.1.1 | ColumnfsMIOspfPrimIpAddr | not-accessible | current | Primary Interface IP Address. |
| 1.3.6.1.4.1.10876.101.1.145.9.1.2 | ColumnfsMIOspfPrimAddresslessIf | not-accessible | current | Primary Interface Addressless Index. |
| 1.3.6.1.4.1.10876.101.1.145.9.1.3 | ColumnfsMIOspfSecIpAddr | not-accessible | current | Secondary Interface IP Address. |
| 1.3.6.1.4.1.10876.101.1.145.9.1.4 | ColumnfsMIOspfSecIpAddrMask | not-accessible | current | Secondary Interface IP Address Mask. |
| 1.3.6.1.4.1.10876.101.1.145.9.1.5 | ColumnfsMIOspfSecIfStatus | read-write | current | This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implem… |
| 1.3.6.1.4.1.10876.101.1.145.10 | TablefsMIOspfAreaAggregateTable | not-accessible | current | Supports configuration of External Tag for Type-7 Address ranges configured. |
| 1.3.6.1.4.1.10876.101.1.145.10.1 | RowfsMIOspfAreaAggregateEntry | not-accessible | current | Supports configuration of External Tag for Type-7 Address ranges configured. |
| 1.3.6.1.4.1.10876.101.1.145.10.1.1 | ColumnfsMIOspfAreaAggregateAreaID | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.10876.101.1.145.10.1.2 | ColumnfsMIOspfAreaAggregateLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.10876.101.1.145.10.1.3 | ColumnfsMIOspfAreaAggregateNet | not-accessible | current | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.10876.101.1.145.10.1.4 | ColumnfsMIOspfAreaAggregateMask | not-accessible | current | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.10876.101.1.145.10.1.5 | ColumnfsMIOspfAreaAggregateExternalTag | read-create | current | A 32-bit field attached to each external route. This is not used by OSPF protocol itself. It may be used to communicate information between AS boundary routers… |
| 1.3.6.1.4.1.10876.101.1.145.11 | TablefsMIOspfAsExternalAggregationTable | not-accessible | current | Indicates whether for the specified address range Type-7/Type-5 LSA will be aggregated or not generated. |
| 1.3.6.1.4.1.10876.101.1.145.11.1 | RowfsMIOspfAsExternalAggregationEntry | not-accessible | current | Supports configuration of Type-5,Type-7 Address Range specifying whether for the configured range, Type-5,Type-7 LSA will be generated or not, and if generated… |
| 1.3.6.1.4.1.10876.101.1.145.11.1.1 | ColumnfsMIOspfAsExternalAggregationNet | not-accessible | current | The IP address of the Net indicated by the range. |
| 1.3.6.1.4.1.10876.101.1.145.11.1.2 | ColumnfsMIOspfAsExternalAggregationMask | not-accessible | current | The subnet mask that pertains to the range. |
| 1.3.6.1.4.1.10876.101.1.145.11.1.3 | ColumnfsMIOspfAsExternalAggregationAreaId | not-accessible | current | Refer to description in fsMIOspfAsExternalAggregationEffect. |
| 1.3.6.1.4.1.10876.101.1.145.11.1.4 | ColumnfsMIOspfAsExternalAggregationEffect | read-create | current | Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to allowAll (3) and associated areaId is 0.0.0.0 aggregat… |
| 1.3.6.1.4.1.10876.101.1.145.11.1.5 | ColumnfsMIOspfAsExternalAggregationTranslation | read-create | current | This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range. |
| 1.3.6.1.4.1.10876.101.1.145.11.1.6 | ColumnfsMIOspfAsExternalAggregationStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.10876.101.1.145.12 | NodefsMIOspfOpaqueLSAGroup | |||
| 1.3.6.1.4.1.10876.101.1.145.12.1 | NodefsMIOspfOpaqueLSAGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.145.12.1.1 | TablefsMIOspfOpaqueTable | not-accessible | current | Information describing the count and check the type 11LSAs. |
| 1.3.6.1.4.1.10876.101.1.145.12.1.1.1 | RowfsMIOspfOpaqueEntry | not-accessible | current | Information describing the type 11 LSAs Count and checksum . |
| 1.3.6.1.4.1.10876.101.1.145.12.1.1.1.1 | ColumnfsMIOspfOpaqueOption | read-write | current | Indicates whether router is Opaque-Capable or not |
| 1.3.6.1.4.1.10876.101.1.145.12.1.1.1.2 | ColumnfsMIOspfType11LsaCount | read-only | current | The number of LS type 11 link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.10876.101.1.145.12.1.1.1.3 | ColumnfsMIOspfType11LsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the Type 11 link-state advertisements con- tained in the link-state database. This sum can be used to determine … |
| 1.3.6.1.4.1.10876.101.1.145.12.1.1.1.4 | ColumnfsMIOspfAreaIDValid | read-write | current | Indicates whether an application is expected to provide the AreaId, while generating a type-10 opaque LSA. This value will be true if an application can provid… |
| 1.3.6.1.4.1.10876.101.1.145.12.2 | TablefsMIOspfOpaqueInterfaceTable | not-accessible | current | Information describing the count and checksum of the Type9 LSAs. |
| 1.3.6.1.4.1.10876.101.1.145.12.2.1 | RowfsMIOspfOpaqueInterfaceEntry | not-accessible | current | Information describing the Type 9 LSAs Count and Checksums. |
| 1.3.6.1.4.1.10876.101.1.145.12.2.1.1 | ColumnfsMIOspfOpaqueType9LsaCount | read-only | current | The total number of TYPE 9 Opaque link-state advertisements. |
| 1.3.6.1.4.1.10876.101.1.145.12.2.1.2 | ColumnfsMIOspfOpaqueType9LsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state ad- vertisements' TYPE9 Opaque LS checksums.The sum change in a router's link state data-base, and to compare the lin… |
| 1.3.6.1.4.1.10876.101.1.145.12.3 | TablefsMIOspfType9LsdbTable | not-accessible | current | The OSPF Process's TYPE9 Link State Database. |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1 | RowfsMIOspfType9LsdbEntry | not-accessible | current | A single Type 9 Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.1 | ColumnfsMIOspfType9LsdbIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.2 | ColumnfsMIOspfType9LsdbOpaqueType | not-accessible | current | The Opaque type of the LSA. |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.3 | ColumnfsMIOspfType9LsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing the Opaque Type and Opaque ID. |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.4 | ColumnfsMIOspfType9LsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.5 | ColumnfsMIOspfType9LsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.6 | ColumnfsMIOspfType9LsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.7 | ColumnfsMIOspfType9LsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.1.145.12.3.1.8 | ColumnfsMIOspfType9LsdbAdvertisement | read-only | current | The entire TYPE9 Opaque Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.1.145.12.4 | TablefsMIOspfType11LsdbTable | not-accessible | current | The OSPF Process's TYPE11 Links State Database. |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1 | RowfsMIOspfType11LsdbEntry | not-accessible | current | A single TYPE11 Opaque Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1.1 | ColumnfsMIOspfType11LsdbOpaqueType | not-accessible | current | The Opaquetype of the link state advertisement. |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1.2 | ColumnfsMIOspfType11LsdbLsid | not-accessible | current | The Link State ID identifies the opaque type and the opaque ID of the received Opaque LSA for an application. |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1.3 | ColumnfsMIOspfType11LsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1.4 | ColumnfsMIOspfType11LsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1.5 | ColumnfsMIOspfType11LsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1.6 | ColumnfsMIOspfType11LsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.1.145.12.4.1.7 | ColumnfsMIOspfType11LsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.1.145.12.5 | TablefsMIOspfAppInfoDbTable | not-accessible | current | This table maintains information related to application statistics. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1 | RowfsMIOspfAppInfoDbEntry | not-accessible | current | A single Application's statistical Information. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.1 | ColumnfsMIOspfAppInfoDbAppid | not-accessible | current | The Application's ID. Each Application has a unique Appid associated with it. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.2 | ColumnfsMIOspfAppInfoDbOpaqueType | read-only | current | The OpaqueType of the LSA the application can generate or receive. Each Application can register only for a single OpaqueType. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.3 | ColumnfsMIOspfAppInfoDbLsaTypesSupported | read-only | current | The LSA Types the application can generate is indicated by a BITMASK.The BITMASK and the interpretation of the types supported is given as below:- BitMask Type… |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.4 | ColumnfsMIOspfAppInfoDbType9Gen | read-only | current | The number of Type 9 LSAs generated by the application. This field is invalid if the application does not support the generation of Type9 LSAs. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.5 | ColumnfsMIOspfAppInfoDbType9Rcvd | read-only | current | The number of Type 9 LSAs received by the application. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.6 | ColumnfsMIOspfAppInfoDbType10Gen | read-only | current | The number of Type 10 LSAs generated by the application. This field is invalid if the application does not support the generation of Type10 LSAs. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.7 | ColumnfsMIOspfAppInfoDbType10Rcvd | read-only | current | The number of Type 10 LSAs received by the application. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.8 | ColumnfsMIOspfAppInfoDbType11Gen | read-only | current | The number of Type 11 LSAs generated by the application. This field is invalid if the application does not support the generation of Type11 LSAs. |
| 1.3.6.1.4.1.10876.101.1.145.12.5.1.9 | ColumnfsMIOspfAppInfoDbType11Rcvd | read-only | current | The number of Type 11 LSAs received by the application. |
| 1.3.6.1.4.1.10876.101.1.145.13 | NodefsMIOspfRRDGroup | |||
| 1.3.6.1.4.1.10876.101.1.145.13.1 | NodefsMIOspfRRDGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.145.13.1.1 | TablefsMIOspfRRDRouteTable | not-accessible | current | Describes RRDRoute Entry |
| 1.3.6.1.4.1.10876.101.1.145.13.1.1.1 | RowfsMIOspfRRDRouteEntry | not-accessible | current | Information describing the RRDRoute |
| 1.3.6.1.4.1.10876.101.1.145.13.1.1.1.1 | ColumnfsMIOspfRRDStatus | read-write | current | This MIB object enables/disables OSPF to participate in Route Redistribution. If set to enabled, OSPF will start advertising the routes learned by other protoc… |
| 1.3.6.1.4.1.10876.101.1.145.13.1.1.1.2 | ColumnfsMIOspfRRDSrcProtoMaskEnable | read-write | current | The bit mask of source protocols from which routes are imported to OSPF. Bit 1, if set, indicates that local routes are redistributed into OSPF. (value = 2) Bi… |
| 1.3.6.1.4.1.10876.101.1.145.13.1.1.1.3 | ColumnfsMIOspfRRDSrcProtoMaskDisable | read-write | current | The bit mask of source protocols from which redistribution to OSPF is disabled. Bit 1, if set, indicates that local routes are not redistributed into OSPF. (va… |
| 1.3.6.1.4.1.10876.101.1.145.13.1.1.1.4 | ColumnfsMIOspfRRDRouteMapEnable | read-write | current | Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value. |
| 1.3.6.1.4.1.10876.101.1.145.13.2 | TablefsMIOspfRRDRouteConfigTable | not-accessible | current | A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM. |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1 | RowfsMIOspfRRDRouteConfigEntry | not-accessible | current | Information describing the configuration of single route entry. |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1.1 | ColumnfsMIOspfRRDRouteDest | not-accessible | current | Ip Address of the Destination route. |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1.2 | ColumnfsMIOspfRRDRouteMask | not-accessible | current | Mask of the Destination route. |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1.3 | ColumnfsMIOspfRRDRouteMetric | read-write | current | The Metric value applied to the route before it is adv. into the OSPF Domain. |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1.4 | ColumnfsMIOspfRRDRouteMetricType | read-write | current | The Metric Type applied to the route before it is adv. into the OSPF Domain |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1.5 | ColumnfsMIOspfRRDRouteTagType | read-write | current | The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the fsMIOspfRR… |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1.6 | ColumnfsMIOspfRRDRouteTag | read-write | current | The Route Tag in case the user configures a Manual option for the tags. |
| 1.3.6.1.4.1.10876.101.1.145.13.2.1.7 | ColumnfsMIOspfRRDRouteStatus | read-create | current | The variable dispalys the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.10876.101.1.145.13.3 | TablefsMIOspfRRDMetricTable | not-accessible | current | A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM. |
| 1.3.6.1.4.1.10876.101.1.145.13.3.1 | RowfsMIOspfRRDMerticEntry | not-accessible | current | Information describing the configuration of single route entry. |
| 1.3.6.1.4.1.10876.101.1.145.13.3.1.1 | ColumnfsMIOspfRRDProtocolId | not-accessible | current | Protocol Id for which the Metric value needs to be changed by the User. |
| 1.3.6.1.4.1.10876.101.1.145.13.3.1.2 | ColumnfsMIOspfRRDMetricValue | read-write | current | The Metric value to be considered instead of the value given by RTM for the protocol specified. If the value not secified by the user, default metric value is … |
| 1.3.6.1.4.1.10876.101.1.145.13.3.1.3 | ColumnfsMIOspfRRDMetricType | read-write | current | The Metric Type to be set for the imported routes. |
| 1.3.6.1.4.1.10876.101.1.145.14 | TablefsMIOspfVirtNbrTable | not-accessible | current | A table of virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.1.145.14.1 | RowfsMIOspfVirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.1.145.14.1.1 | ColumnfsMIOspfVirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.14.1.2 | ColumnfsMIOspfVirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.14.1.3 | ColumnfsMIOspfVirtNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.15 | NodefsMIospfDistInOutRouteMap | |||
| 1.3.6.1.4.1.10876.101.1.145.15.1 | TablefsMIOspfDistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.10876.101.1.145.15.1.1 | RowfsMIOspfDistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.10876.101.1.145.15.1.1.1 | ColumnfsMIOspfDistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.10876.101.1.145.15.1.1.3 | ColumnfsMIOspfDistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.10876.101.1.145.15.1.1.4 | ColumnfsMIOspfDistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.10876.101.1.145.15.1.1.5 | ColumnfsMIOspfDistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.10876.101.1.145.16 | NodefsMIospfPreferenceGroup | |||
| 1.3.6.1.4.1.10876.101.1.145.16.1 | TablefsMIOspfPreferenceTable | not-accessible | current | A table describing preference value for route map. |
| 1.3.6.1.4.1.10876.101.1.145.16.1.1 | RowfsMIOspfPreferenceEntry | not-accessible | current | Information describing preference value of single entry. |
| 1.3.6.1.4.1.10876.101.1.145.16.1.1.1 | ColumnfsMIOspfPreferenceValue | read-write | current | Preference value for OSPF routes. Use '0' to set default value |
| 1.3.6.1.4.1.10876.101.1.145.17 | TablefsMIOspfIfAuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for the cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.145.17.1 | RowfsMIOspfIfAuthEntry | not-accessible | current | The OSPF Interface Auththentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.145.17.1.1 | ColumnfsMIOspfIfAuthIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.145.17.1.2 | ColumnfsMIOspfIfAuthAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.145.17.1.3 | ColumnfsMIOspfIfAuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.17.1.4 | ColumnfsMIOspfIfAuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.17.1.5 | ColumnfsMIOspfIfAuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed … |
| 1.3.6.1.4.1.10876.101.1.145.17.1.6 | ColumnfsMIOspfIfAuthKeyStartGenerate | read-write | current | The time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:… |
| 1.3.6.1.4.1.10876.101.1.145.17.1.7 | ColumnfsMIOspfIfAuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:5… |
| 1.3.6.1.4.1.10876.101.1.145.17.1.8 | ColumnfsMIOspfIfAuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed a… |
| 1.3.6.1.4.1.10876.101.1.145.17.1.9 | ColumnfsMIOspfIfAuthKeyStatus | read-write | current | Identifies the status of the key. NOTE:invalid (2) currently not supported |
| 1.3.6.1.4.1.10876.101.1.145.18 | TablefsMIOspfVirtIfAuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.145.18.1 | RowfsMIOspfVirtIfAuthEntry | not-accessible | current | The OSPF Interface Auththentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.145.18.1.1 | ColumnfsMIOspfVirtIfAuthAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0. |
| 1.3.6.1.4.1.10876.101.1.145.18.1.2 | ColumnfsMIOspfVirtIfAuthNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.10876.101.1.145.18.1.3 | ColumnfsMIOspfVirtIfAuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.18.1.4 | ColumnfsMIOspfVirtIfAuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.145.18.1.5 | ColumnfsMIOspfVirtIfAuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed … |
| 1.3.6.1.4.1.10876.101.1.145.18.1.6 | ColumnfsMIOspfVirtIfAuthKeyStartGenerate | read-write | current | The time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:… |
| 1.3.6.1.4.1.10876.101.1.145.18.1.7 | ColumnfsMIOspfVirtIfAuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:5… |
| 1.3.6.1.4.1.10876.101.1.145.18.1.8 | ColumnfsMIOspfVirtIfAuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed a… |
| 1.3.6.1.4.1.10876.101.1.145.18.1.9 | ColumnfsMIOspfVirtIfAuthKeyStatus | read-write | current | Identifies the status of the key. NOTE: invalid (2) is currently not supported |
| 1.3.6.1.4.1.10876.101.1.145.100 | NodefsMIOspfTestGroup | |||
| 1.3.6.1.4.1.10876.101.1.145.101 | NodefsMIOspfNotification | |||
| 1.3.6.1.4.1.10876.101.1.145.101.0 | NodefsMIOspfTraps | |||
| 1.3.6.1.4.1.10876.101.1.145.101.0.1 | NotificationfsMIOspfRestartStatusChange | current | An fsMIOspfRestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when the… | |
| 1.3.6.1.4.1.10876.101.1.145.101.0.2 | NotificationfsMIOspfNbrRestartHelperStatusChange | current | An fsMIOspfNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should be … | |
| 1.3.6.1.4.1.10876.101.1.145.101.0.3 | NotificationfsMIOspfVirtNbrRestartHelperStatusChange | current | An fsMIOspfVirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This tra… | |
| 1.3.6.1.4.1.10876.101.1.145.101.0.4 | NotificationfsMIOspfHotStandbyEventTrap | current | A notification is sent to the management entity whenever there is a state change in the OSPF hotstandby Module. |