MIB Viewer

SUPERMICRO-PBB-TE-MIB

30 objects
The proprietary MIB module for PBB-TE module
Imported Objects
IEEE8021-PBBTE-MIB MISSINGieee8021PbbTeTeSidEntry IfIndexList
SNMPv2-SMICounter32 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCMacAddress RowStatus
SUPERMICROQ-BRIDGE-MIBVlanId
OIDNameAccessStatusDescription
1.3.6.1.4.1.10876.101.2.11IdentityfspbbteThe proprietary MIB module for PBB-TE module
1.3.6.1.4.1.10876.101.2.11.1NodefsPbbTeScalars
1.3.6.1.4.1.10876.101.2.11.1.1ScalarfsPbbTeGlobalTraceOptionread-writecurrentThis object is used to enable trace statements in PBB-TE module for global events that are not specific to any virtual context. A four byte integer is used for…
1.3.6.1.4.1.10876.101.2.11.2NodefsPbbTeContext
1.3.6.1.4.1.10876.101.2.11.2.1TablefsPbbTeContextTablenot-accessiblecurrentThis table contains Provider Backbone Bridge - Traffic engineering configuration for each context running in the switch
1.3.6.1.4.1.10876.101.2.11.2.1.1RowfsPbbTeContextEntrynot-accessiblecurrentThis table contains context number and the PBB-TE configuration for the particular context
1.3.6.1.4.1.10876.101.2.11.2.1.1.1ColumnfsPbbTeContextIdnot-accessiblecurrentIdentifies Virtual Context in the system.
1.3.6.1.4.1.10876.101.2.11.2.1.1.2ColumnfsPbbTeContextSystemControlread-writecurrentStart or shutdown Provider Backbone Brige-Traffic Engg in the system. When set as 'start',resources required by PBB-TE module are allocated & PBB-TE module sta…
1.3.6.1.4.1.10876.101.2.11.2.1.1.3ColumnfsPbbTeContextTraceOptionread-writecurrentThis object is used to enable trace statements in PBB-TE module for events specific to a context. A four byte integer is used for enabling the trace level. Eac…
1.3.6.1.4.1.10876.101.2.11.2.1.1.4ColumnfsPbbTeContextNoOfActiveEspsread-onlycurrentThe number of current active ESPs existing in the given virtual context
1.3.6.1.4.1.10876.101.2.11.2.1.1.5ColumnfsPbbTeContextNoOfCreatedEspsread-onlycurrentThe number of ESPs that has been created in the given virtual context, since creation of the context.
1.3.6.1.4.1.10876.101.2.11.2.1.1.6ColumnfsPbbTeContextNoOfDeletedEspsread-onlycurrentThe number of ESPs that has been deleted in the given virtual context, since creation of the context
1.3.6.1.4.1.10876.101.2.11.3NodefsPbbTeEspVidMapping
1.3.6.1.4.1.10876.101.2.11.3.1TablefsPbbTeEspVidTablenot-accessiblecurrentThis table contains ESP Vlans in this bridge
1.3.6.1.4.1.10876.101.2.11.3.1.1RowfsPbbTeEspVidEntrynot-accessiblecurrentA list of ESP Vlans configured in this bridge
1.3.6.1.4.1.10876.101.2.11.3.1.1.1ColumnfsPbbTeEspVidnot-accessiblecurrentVlan identifier allocated for provisioning TE Ethernet switched paths.
1.3.6.1.4.1.10876.101.2.11.3.1.1.2ColumnfsPbbTeEspVidRowStatusread-createcurrentThis object indicates the status of this entry. A Vlan ID can be marked as an ESP-VID by creating and activating an entry in this table i.e. by assigning a val…
1.3.6.1.4.1.10876.101.2.11.4NodefsPbbTeTeSidExtension
1.3.6.1.4.1.10876.101.2.11.4.1TablefsPbbTeTeSidExtTablenot-accessiblecurrentThis table is extension of standard ieee8021PbbTeTeSidTable
1.3.6.1.4.1.10876.101.2.11.4.1.1RowfsPbbTeTeSidExtEntrynot-accessiblecurrentEntries in this table are the extension entries of ieee8021PbbTeTeSidTable
1.3.6.1.4.1.10876.101.2.11.4.1.1.1ColumnfsPbbTeTeSidExtContextIdread-writecurrentIdentifies Virtual Context in the system. If the TESID entry is not assigned to any virtual context then it will have a value of -1.
1.3.6.1.4.1.10876.101.2.11.5NodefsPbbTeTest
1.3.6.1.4.1.10876.101.2.11.5.1ScalarfsPbbTeTestApiContextIdread-writecurrentIdentifies Virtual Context in the system.
1.3.6.1.4.1.10876.101.2.11.5.2ScalarfsPbbTeTestApiTeSidread-writecurrentTraffic-engineering Service-instance identifier. Specifying TE-SID is optional when creating an ESP. If TE-SID is not provided, a Vlan Static Filtering entry a…
1.3.6.1.4.1.10876.101.2.11.5.3ScalarfsPbbTeTestApiDestMacAddrread-writecurrentDestination Mac Address of the ESP.
1.3.6.1.4.1.10876.101.2.11.5.4ScalarfsPbbTeTestApiSourceMacAddrread-writecurrentSource Mac Address of the ESP. Specifying Source MAC address is optional when creating an ESP. It is mandatory only when the TESID is specified. Otherwise it i…
1.3.6.1.4.1.10876.101.2.11.5.5ScalarfsPbbTeTestApiEspVlanIdread-writecurrentVlan Id that has been allocated as an ESP vlan.
1.3.6.1.4.1.10876.101.2.11.5.6ScalarfsPbbTeTestApiEgressPortread-writecurrentEgress port for point to point ESPs. If the Egress port is configured as zero, then the EgressPortList will be referred.
1.3.6.1.4.1.10876.101.2.11.5.7ScalarfsPbbTeTestApiEgressPortListread-writecurrentEgreePortList in case of port to multipoint ESPs. This object will be referred only when the EgressPort is configured as zero.
1.3.6.1.4.1.10876.101.2.11.5.8ScalarfsPbbTeTestApiActionread-writecurrentThis object indicates the status of this entry. When this object is configured, the PBB-TE API for ESP creation will be invoked with the last configured values…