SUPERMICRO-RIP6-MIB
80 objects
The MIB module for RIP6.
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.3 | Identityfsrip6 | The MIB module for RIP6. | ||
| 1.3.6.1.4.1.10876.101.1.3.1 | Nodefsrip6Scalars | |||
| 1.3.6.1.4.1.10876.101.1.3.1.1 | Scalarfsrip6RoutePreference | read-write | current | The route prefered for forwarding a packet to a destination when a statically configured route, as well as a dynamically learnt route exists for a particular d… |
| 1.3.6.1.4.1.10876.101.1.3.1.2 | Scalarfsrip6GlobalDebug | read-write | current | Enables the tracing in RIP6. A 32 bit integer is used to store the Tracing level. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 -… |
| 1.3.6.1.4.1.10876.101.1.3.1.3 | Scalarfsrip6GlobalInstanceIndex | read-write | current | This object specifes Instance Index, used to indicate the instance w.r.t which all the configuration will be performed. Before any configuration this object ha… |
| 1.3.6.1.4.1.10876.101.1.3.1.4 | Scalarfsrip6PeerFilter | read-write | current | Flag to set peer list to allow or deny. if the flag set to allow, then responses from the peers in the list can be allowed to be processed. If the flag is set … |
| 1.3.6.1.4.1.10876.101.1.3.1.5 | Scalarfsrip6AdvFilter | read-write | current | Flag to enable filtering of routes in the Ripng responses to be advertised. Setting the flag to enable(1) will filter the corresponding routing entries in the … |
| 1.3.6.1.4.1.10876.101.1.3.1.6 | ScalarfsRip6RRDAdminStatus | read-write | current | Controls redistribution of Direct, Static, OSPF and BGP routes into RIP. If this object is set to enable, then routes from protocols as specified by fsrip6RRDP… |
| 1.3.6.1.4.1.10876.101.1.3.1.7 | Scalarfsrip6RRDProtoMaskForEnable | read-write | current | The bit mask of source protocols from which routes are imported to RIP.(LSB corresponds to Bit 0) Bit 1, if set, indicates that direct routes can be redistribu… |
| 1.3.6.1.4.1.10876.101.1.3.1.8 | Scalarfsrip6RRDSrcProtoMaskForDisable | read-write | current | The bit mask of source protocols from which redistribution to BGP is disabled.(LSB corresponds to Bit 0) Bit 1, if set, indicates that direct routes cannot be … |
| 1.3.6.1.4.1.10876.101.1.3.1.9 | Scalarfsrip6RRDRouteDefMetric | read-write | current | The default metric to be used for the imported routes from RTM6. If 0, then metric value from the RTM6 will be used. |
| 1.3.6.1.4.1.10876.101.1.3.1.10 | Scalarfsrip6RRDRouteMapName | read-write | current | Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value. |
| 1.3.6.1.4.1.10876.101.1.3.1.11 | Scalarfsrip6RouteCount | read-only | current | Indicates the number of route entries. |
| 1.3.6.1.4.1.10876.101.1.3.2 | Nodefsrip6Tables | |||
| 1.3.6.1.4.1.10876.101.1.3.2.1 | Tablefsrip6InstanceTable | not-accessible | current | The table contains Instance related parameters. This table is a global table i.e. its not instance specific. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1 | Rowfsrip6InstanceEntry | not-accessible | current | The entry in the IPv6 RIP Instance Table. An entry is created/deleted in this table when the corresponding RIP6 instance is created/deleted. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1 | Columnfsrip6InstanceIndex | not-accessible | current | The index value which uniquely identifies the RIPng Instance. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.2 | Columnfsrip6InstanceStatus | read-write | current | The status of the specific Instance whether UP or DOWN. |
| 1.3.6.1.4.1.10876.101.1.3.2.2 | Tablefsrip6InstIfMapTable | not-accessible | current | The table contains Instance-If mapping parametersits. This is a global table ie its not instance specific. |
| 1.3.6.1.4.1.10876.101.1.3.2.2.1 | Rowfsrip6InstIfMapEntry | not-accessible | current | The entry in this table is created whenever an Interface gets attached to an Instance and deleted whenever and Instance get deleted or an Interface gets detach… |
| 1.3.6.1.4.1.10876.101.1.3.2.2.1.1 | Columnfsrip6IfIndex | not-accessible | current | The index value which uniquely identifies the RIPng Interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.2.1.2 | Columnfsrip6InstIfMapInstId | read-only | current | The index value which uniquely identifies the RIPng Instance to which a RIPng Interface is attached. When a row is created in this table this object is assigne… |
| 1.3.6.1.4.1.10876.101.1.3.2.2.1.3 | Columnfsrip6InstIfMapIfAtchStatus | read-write | current | The attachment status of a RIPng Interface, whether attached to an instance or not. |
| 1.3.6.1.4.1.10876.101.1.3.2.3 | Tablefsrip6RipIfTable | not-accessible | current | The table containing interface-related RIPng parameters. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1 | Rowfsrip6RipIfEntry | not-accessible | current | The entry in the IPv6 RIP Interface Table. An entry is created/deleted in this table when corresponding IPv6 interface is created/deleted. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.1 | Columnfsrip6RipIfIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this fsrip6RipIfEntry exists. The interface identified by a particular value of this inde… |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.2 | Columnfsrip6RipIfProfileIndex | read-write | current | Index into the RIPng Profile Table which contains the RIPng parameters for this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.3 | Columnfsrip6RipIfCost | read-write | current | The 'cost' associated with this interface. This 'cost' is added to the metric of all routes learnt over this interface before they are installed in the routing… |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.4 | Columnfsrip6RipIfOperStatus | read-only | current | The operational status of this interface and whether RIPng is enabled/disabled on it. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.5 | Columnfsrip6RipIfProtocolEnable | read-write | current | RIPng is enabled over this Interface or Not. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.6 | Columnfsrip6RipIfInMessages | read-only | current | Number of RIPng messages received on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.7 | Columnfsrip6RipIfInRequests | read-only | current | Number of RIPng Requests received on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.8 | Columnfsrip6RipIfInResponses | read-only | current | Number of RIPng Responses received on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.9 | Columnfsrip6RipIfUnknownCmds | read-only | current | Number of RIPng packets with unknown command received on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.10 | Columnfsrip6RipIfInOtherVer | read-only | current | Number of RIPng packets received with other version on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.11 | Columnfsrip6RipIfInDiscards | read-only | current | Number of received RIPng packets that were discarded. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.12 | Columnfsrip6RipIfOutMessages | read-only | current | Number of RIPng messages sent out on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.13 | Columnfsrip6RipIfOutRequests | read-only | current | Number of RIPng Requests sent out on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.14 | Columnfsrip6RipIfOutResponses | read-only | current | Number of RIPng Responses sent out on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.15 | Columnfsrip6RipIfOutTrigUpdates | read-only | current | Number of triggered updates sent out on this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.3.1.16 | Columnfsrip6RipIfDefRouteAdvt | read-write | current | This Object controls the advertisement of default route over this interface. |
| 1.3.6.1.4.1.10876.101.1.3.2.4 | Tablefsrip6RipProfileTable | not-accessible | current | The table containing RIPng related configurable parameters which are maintained as a profile and referred by the fsrip6RipIfTable. |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1 | Rowfsrip6RipProfileEntry | not-accessible | current | The entry in the IPv6 Address Profile Table which contains RIPng parameters. One or more RIP interfaces refer to this profile through the object fsrip6RipIfPro… |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1.1 | Columnfsrip6RipProfileIndex | not-accessible | current | A unique value identifying the particular IPv6 RIP profile. This is referred by fsrip6RipIfProfileIndex of the IPv6 RIP interface Table. |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1.2 | Columnfsrip6RipProfileStatus | read-write | current | Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2). |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1.3 | Columnfsrip6RipProfileHorizon | read-write | current | Indicates the type of horizoning to be done while sending routing informations (learnt on that interface) over that interface. If the configured value is split… |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1.4 | Columnfsrip6RipProfilePeriodicUpdTime | read-write | current | Indicates the interval in seconds between the periodic RIPng updates. |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1.5 | Columnfsrip6RipProfileTrigDelayTime | read-write | current | Indicates the time interval in seconds by which further triggered updates are delayed after one triggered update is sent. |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1.6 | Columnfsrip6RipProfileRouteAge | read-write | current | Indicates the period in seconds for which a dynamic route will be kept in the IPv6 RIP routing table without receiving any updates for the route. After this ti… |
| 1.3.6.1.4.1.10876.101.1.3.2.4.1.7 | Columnfsrip6RipProfileGarbageCollectTime | read-write | current | Indicates the period in seconds for which a route which has aged out is retained in the IPv6 RIP Routing Table. After this time interval the route is deleted f… |
| 1.3.6.1.4.1.10876.101.1.3.2.5 | Tablefsrip6RipRouteTable | not-accessible | current | This table contains dynamic routes that are learnt through RIPng protocol as well as non-RIPng routes learnt via redistribution. |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1 | Rowfsrip6RipRouteEntry | not-accessible | current | An entry in the RIPng Routing Table. An entry can be created by means of the RIPng protocol and redistributed routes from IPv6. There can be a non-RIPng route … |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.1 | Columnfsrip6RipRouteDest | not-accessible | current | The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value. |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.2 | Columnfsrip6RipRoutePfxLength | not-accessible | current | Indicates the prefix length of the destination address. |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.3 | Columnfsrip6RipRouteProtocol | not-accessible | current | The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix. |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.4 | Columnfsrip6RipRouteIfIndex | not-accessible | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.5 | Columnfsrip6RipRouteNextHop | read-only | current | Next hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.6 | Columnfsrip6RipRouteMetric | read-write | current | The routing metric associated with this route. A metric of 16 indicates infinity implying the route is no longer valid. |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.7 | Columnfsrip6RipRouteTag | read-write | current | This object specifies whether this route is an internal or external route. Value 0 represent routes are internal to the routing domain and Value > 0 represent … |
| 1.3.6.1.4.1.10876.101.1.3.2.5.1.8 | Columnfsrip6RipRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. For statically configured routes and locally derived routes, thi… |
| 1.3.6.1.4.1.10876.101.1.3.2.6 | Tablefsrip6RipPeerTable | not-accessible | current | This table contains the Addresses of those Peers whose RIPng Responses are to be accepted or denied |
| 1.3.6.1.4.1.10876.101.1.3.2.6.1 | Rowfsrip6RipPeerEntry | not-accessible | current | Single entity in the fsrip6RipPeerTable. |
| 1.3.6.1.4.1.10876.101.1.3.2.6.1.1 | Columnfsrip6RipPeerAddr | not-accessible | current | The Address of the Peer, from whom Responses are to be Allowed or Denied |
| 1.3.6.1.4.1.10876.101.1.3.2.6.1.2 | Columnfsrip6RipPeerEntryStatus | read-write | current | 'valid' indicated presence of the entry. 'invalid' means the entry is unavailable. |
| 1.3.6.1.4.1.10876.101.1.3.2.7 | Tablefsrip6RipAdvFilterTable | not-accessible | current | This table contains the routes which are NOT to be advertised in the RIPng Responses sent by the router, if fsrip6AdvFilter is enabled |
| 1.3.6.1.4.1.10876.101.1.3.2.7.1 | Rowfsrip6RipAdvFilterEntry | not-accessible | current | Single entity in the fsrip6RipAdvFilterTable |
| 1.3.6.1.4.1.10876.101.1.3.2.7.1.1 | Columnfsrip6RipAdvFilterAddress | not-accessible | current | The route(s) with this address is NOT to be advertised to the Peers, if fsrip6AdvFilter is enabled |
| 1.3.6.1.4.1.10876.101.1.3.2.7.1.2 | Columnfsrip6RipAdvFilterStatus | read-write | current | 'valid' indicated presence of the entry. 'invalid' means the entry is unavailable. |
| 1.3.6.1.4.1.10876.101.1.3.3 | Nodefsrip6DistInOutRouteMap | |||
| 1.3.6.1.4.1.10876.101.1.3.3.1 | TablefsRip6DistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.10876.101.1.3.3.1.1 | RowfsRip6DistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.10876.101.1.3.3.1.1.1 | ColumnfsRip6DistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.10876.101.1.3.3.1.1.3 | ColumnfsRip6DistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.10876.101.1.3.3.1.1.4 | ColumnfsRip6DistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.10876.101.1.3.3.1.1.5 | ColumnfsRip6DistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.10876.101.1.3.4 | Nodefsrip6PreferenceGroup | |||
| 1.3.6.1.4.1.10876.101.1.3.4.1 | ScalarfsRip6PreferenceValue | read-write | current | Preference value for RIP6 routes. If the value is set as '0',it will inturn be mapped to default value |
| 1.3.6.1.4.1.10876.101.1.3.5 | NodefsRip6Test | |||
| 1.3.6.1.4.1.10876.101.1.3.5.1 | ScalarfsRip6TestBulkUpd | read-write | current | This is disabled to crash the active node during bulk update. |
| 1.3.6.1.4.1.10876.101.1.3.5.2 | ScalarfsRip6TestDynamicUpd | read-write | current | This is disabled to make the active node drop the dynamic update to standby node. |