SUPERMICRO-RM-MIB
55 objects
The proprietary MIB module for RM. This MIB supports 1:1 Redundancy.
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv6 |
| RMON2-MIB | ZeroBasedCounter32 |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.99 | IdentityfsRmMIB | The proprietary MIB module for RM. This MIB supports 1:1 Redundancy. | ||
| 1.3.6.1.4.1.10876.101.1.99.0 | NodefsRmNotifications | |||
| 1.3.6.1.4.1.10876.101.1.99.0.1 | NotificationfsRmTrapEvent | current | This trap signifies the status of various operations performed in a system with Redundancy capability. Standby node cannot send external traps. It forwards the… | |
| 1.3.6.1.4.1.10876.101.1.99.1 | NodefsRm | |||
| 1.3.6.1.4.1.10876.101.1.99.1.1 | ScalarfsRmSelfNodeId | read-only | current | The NodeId of this node |
| 1.3.6.1.4.1.10876.101.1.99.1.2 | ScalarfsRmPeerNodeId | read-only | current | The NodeId of the Peer. Currently one peer is supported. |
| 1.3.6.1.4.1.10876.101.1.99.1.3 | ScalarfsRmActiveNodeId | read-only | current | The NodeId of the active node. Active node is elected by discovering the peer node Ip address and then selecting the node with greater Ip address. |
| 1.3.6.1.4.1.10876.101.1.99.1.4 | ScalarfsRmNodeState | read-only | current | State of the node. The state of the node is decided after election. Election is based on the NodeId. |
| 1.3.6.1.4.1.10876.101.1.99.1.5 | ScalarfsRmHbInterval | read-write | current | The time interval in milli-seconds, between the Heart Beat messages. This value should be 4 times lesser than that of PeerDead Interval. This value must be sam… |
| 1.3.6.1.4.1.10876.101.1.99.1.6 | ScalarfsRmPeerDeadInterval | read-write | current | The number of milli-seconds that a node's Heart Beat messages have not seen before declaring peer down. This value should be 4 times greater than that of the H… |
| 1.3.6.1.4.1.10876.101.1.99.1.7 | ScalarfsRmTrcLevel | read-write | current | Level of trace required for RM. The levels are defined as follows: 0x00000001 0x00000002 0x00000004 0x00000008 0x00000010 0x00000020 0x00000040 0x00000080 0x00… |
| 1.3.6.1.4.1.10876.101.1.99.1.8 | ScalarfsRmForceSwitchoverFlag | read-write | current | To force-switchover the ACTIVE node to become STANDBY, this flag can be enabled. This object is not saved and restored during mib save-restore operation 1. ena… |
| 1.3.6.1.4.1.10876.101.1.99.1.9 | ScalarfsRmPeerDeadIntMultiplier | read-write | current | The peer dead interval is expressed as a multiple of heart beat interval. This object is used to store the multiplier value by which the heart beat interval is… |
| 1.3.6.1.4.1.10876.101.1.99.1.10 | ScalarfsRmSwitchId | read-write | current | Slot Number of a Switch in a Stacked environment. This object is applicable only for Coldstandby case. |
| 1.3.6.1.4.1.10876.101.1.99.1.11 | ScalarfsRmConfiguredState | read-write | current | The value represents the configured/desired state of the switch in a Stacked environment 1 - Preferred Master 2 - Backup Master 3 - Preferred Slave This object… |
| 1.3.6.1.4.1.10876.101.1.99.1.12 | ScalarfsRmStackMacAddr | read-only | current | Stack Mac Address of the switch in a Stacked environment. This object is applicable only for Coldstandby case. |
| 1.3.6.1.4.1.10876.101.1.99.1.13 | TablefsRmPeerTable | not-accessible | current | RM Peer Table consists of Peer infomation in a Stacked environment. This table is applicable only for Coldstandby case. |
| 1.3.6.1.4.1.10876.101.1.99.1.13.1 | RowfsRmPeerTableEntry | not-accessible | current | An entry in the table represents a peer infomation in a stacked environment. |
| 1.3.6.1.4.1.10876.101.1.99.1.13.1.1 | ColumnfsRmPeerSwitchId | not-accessible | current | Switch identifier of a peer. |
| 1.3.6.1.4.1.10876.101.1.99.1.13.1.2 | ColumnfsRmPeerStackIpAddr | read-only | current | Stacking IP address of peer switch. Link local address will be used as stack IP address. |
| 1.3.6.1.4.1.10876.101.1.99.1.13.1.3 | ColumnfsRmPeerStackMacAddr | read-only | current | Stack MAC address of peer switch. |
| 1.3.6.1.4.1.10876.101.1.99.1.13.1.4 | ColumnfsRmPeerSwitchBaseMacAddr | read-only | current | Ethernet address (Base MAC address) of peer. |
| 1.3.6.1.4.1.10876.101.1.99.1.14 | ScalarfsRmStackPortCount | read-write | current | The object defines the number of stack ports configured in a device for the purpose of stacking. BY default the stack port count will be zero. If the stack por… |
| 1.3.6.1.4.1.10876.101.1.99.1.15 | ScalarfsRmColdStandby | read-write | current | The object is for enabling or disabling the coldstandby stacking support in a stacked environment. By default it will be disabled. |
| 1.3.6.1.4.1.10876.101.1.99.1.16 | ScalarfsRmModuleTrc | read-write | current | This object is used to enable the High Availability enabled module trace. Currently defined modules as follows: 0x00000001 0x00000002 0x00000004 0x00000008 0x0… |
| 1.3.6.1.4.1.10876.101.1.99.1.17 | ScalarfsRmProtocolRestartFlag | read-write | current | This object is used for enabling or disabling the restart of all the protocols registered with the RM, in the standby state, when the ISS node reaches an unpre… |
| 1.3.6.1.4.1.10876.101.1.99.1.18 | ScalarfsRmProtocolRestartRetryCnt | read-write | current | This object is used to specify the maximum number of times the protocols in the ISS switch can be restarted when the ISS node reaches an unpredictable state. T… |
| 1.3.6.1.4.1.10876.101.1.99.1.19 | ScalarfsRmHitlessRestartFlag | read-write | current | This object is used for hitless restart feature. Initially this object is set as disable (value = 0). User is allowed to configure only the value store (value … |
| 1.3.6.1.4.1.10876.101.1.99.1.20 | ScalarfsRmIpAddress | read-write | current | This object is used only if the Rm stacking interface type is Inband.This object is used to specify the IP Address to be used for RM TCP /IP communication . If… |
| 1.3.6.1.4.1.10876.101.1.99.1.21 | ScalarfsRmSubnetMask | read-write | current | This object is used only if the Rm stacking interface type is Inband.This object is used to specify the Subnet Mask to be associated withIP Address to be used … |
| 1.3.6.1.4.1.10876.101.1.99.1.22 | ScalarfsRmStackInterface | read-write | current | This object is used only if the Rm stacking interface type is Inband.This object is used to specify the Stacking port to be used for RM TCP/IP Communication .I… |
| 1.3.6.1.4.1.10876.101.1.99.2 | NodefsRmTrap | |||
| 1.3.6.1.4.1.10876.101.1.99.2.1 | ScalarfsRmTrapModuleId | accessible-for-notify | current | This object specifies the module identifier which generates the trap. |
| 1.3.6.1.4.1.10876.101.1.99.2.2 | ScalarfsRmTrapOperation | accessible-for-notify | current | Operations performed by the modules specified in fsRmTrapModuleId. syncUp - Synchronization operation performed by modules running on standby node. i.e., stand… |
| 1.3.6.1.4.1.10876.101.1.99.2.3 | ScalarfsRmTrapOperationStatus | accessible-for-notify | current | The status of operation specified by object fsRmTrapOperation. |
| 1.3.6.1.4.1.10876.101.1.99.2.4 | ScalarfsRmTrapError | accessible-for-notify | current | The reason for the failure of particular fsRmTrapOperation. The value of this object is valid only when fsRmTrapOperationStatus is set to failure(3), in all ot… |
| 1.3.6.1.4.1.10876.101.1.99.2.5 | ScalarfsRmTrapEventTime | accessible-for-notify | current | This object specifies the date and time at which fsRmTrapOperation was performed. |
| 1.3.6.1.4.1.10876.101.1.99.2.6 | ScalarfsRmTrapErrorStr | accessible-for-notify | current | This object specifies the details of the error information in string format. This object is set only when fsRmTrapOperationStatus is failed(3).. Contains NULL … |
| 1.3.6.1.4.1.10876.101.1.99.2.7 | ScalarfsRmTrapSwitchId | read-only | current | Slot number of the switch which sends trap message. This objects is applicable only for Coldstandby case. |
| 1.3.6.1.4.1.10876.101.1.99.3 | NodefsRmStatistics | |||
| 1.3.6.1.4.1.10876.101.1.99.3.1 | ScalarfsRmStatsSyncMsgTxCount | read-only | current | Total number of synchronization messages successfully sent from ACTIVE node. |
| 1.3.6.1.4.1.10876.101.1.99.3.2 | ScalarfsRmStatsSyncMsgTxFailedCount | read-only | current | Total number of sync-up messages failed while sending. |
| 1.3.6.1.4.1.10876.101.1.99.3.3 | ScalarfsRmStatsSyncMsgRxCount | read-only | current | Total number of sync-up messages received at STANDBY node. |
| 1.3.6.1.4.1.10876.101.1.99.3.4 | ScalarfsRmStatsSyncMsgProcCount | read-only | current | Total number of sync-up messages received and processed at STANDBY node. |
| 1.3.6.1.4.1.10876.101.1.99.3.5 | ScalarfsRmStatsSyncMsgMissedCount | read-only | current | RM module at standby receives and processes the synchronization messages with the help of the sequence number in the message. In some failure cases, when the m… |
| 1.3.6.1.4.1.10876.101.1.99.3.6 | ScalarfsRmStatsConfSyncMsgFailCount | read-only | current | Total number of static configuration sync-up messages that have been failed. This counter will be incremented only if the failure happens after the completion … |
| 1.3.6.1.4.1.10876.101.1.99.4 | NodefsRmTest | |||
| 1.3.6.1.4.1.10876.101.1.99.4.1 | TablefsRmSwitchoverTimeTable | not-accessible | current | RM Switch over Table consists of the switch over time taken by every module. |
| 1.3.6.1.4.1.10876.101.1.99.4.1.1 | RowfsRmSwitchoverTimeEntry | not-accessible | current | An entry in the table represents the time taken by a particular module for switch over in a stacked environment. |
| 1.3.6.1.4.1.10876.101.1.99.4.1.1.1 | ColumnfsRmAppId | not-accessible | current | Application identifier for a module. |
| 1.3.6.1.4.1.10876.101.1.99.4.1.1.2 | ColumnfsRmAppName | read-only | current | Application name for a module. |
| 1.3.6.1.4.1.10876.101.1.99.4.1.1.3 | ColumnfsRmEntryTime | read-only | current | The entry time in milli seconds when RM has given the GO_ACTIVE event to the particular module |
| 1.3.6.1.4.1.10876.101.1.99.4.1.1.4 | ColumnfsRmExitTime | read-only | current | The exit time in milliseconds when RM has completed the GO_ACTIVE event processing and returned ACK to RM |
| 1.3.6.1.4.1.10876.101.1.99.4.1.1.5 | ColumnfsRmSwitchoverTime | read-only | current | The time taken for a particular module in milli seconds to complete the switch over ie. Active to Standby transition |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FsRmState | INTEGER { init(0), active(1), standby(2) } | current | The State of the node. |