SUPERMICRO-RM-TE-LINK-MIB
46 objects
All rights reserved
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMPv2-SMI | enterprises IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.10 | IdentityfutRMTe | All rights reserved | ||
| 1.3.6.1.4.1.10876.101.1.10.0 | NodefutRMTeLinkNotifications | |||
| 1.3.6.1.4.1.10876.101.1.10.1 | NodefutRMTeLinkObjects | |||
| 1.3.6.1.4.1.10876.101.1.10.1.1 | NodefutRmTeLinkGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.1.1.1 | ScalarfutRmTeLinkRegDeregistration | read-write | current | This specific scalar object is for RM(Resource Manager) module to register/deregister itself with the OSPF-TE module to provide link/interface information. |
| 1.3.6.1.4.1.10876.101.1.10.1.2 | TablefutRMTeLinkTable | not-accessible | current | This table specifies the grouping of characteristics/attributes of TE links. |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1 | RowfutRMTeLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry with an ifType of futRMTeLink(200), i.e. for every TE link. An ifEntry in the ifTable must exist before a futRMT… |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.1 | ColumnfutRMTeLinkLocalIpAddr | read-create | current | The local Internet address for numbered links. For an unnumbered link, the local address is of type unknown and this object is set to the zero length string an… |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.2 | ColumnfutRMTeLinkRemoteIpAddr | read-create | current | The remote Internet address for numbered links. The remote IP address associated with the TE link (IPv4). For an unnumbered link, the remote address is of type… |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.3 | ColumnfutRMTeLinkRemoteRtrId | read-create | current | This object identifies the routerId of the router/device at the other end of the link. This is useful in the case of FA-TE links where it is not possible to ge… |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.4 | ColumnfutRMTeLinkMetric | read-create | current | The traffic engineering metric for the TE link. |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.5 | ColumnfutRMTeLinkProtectionType | read-create | current | This attribute specifies link protection type of the TE link. Description of the different protection types can be found in the 'Routing Extensions in Support … |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.6 | ColumnfutRMTeLinkResourceClass | read-create | current | This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. Encoding of the resource class is described in the 'Traffic Engin… |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.7 | ColumnfutRMTeLinkIncomingIfId | read-create | current | For unnumbered links, the incoming interface is set to the outgoing interface identifier chosen by the neighboring LSR for the reverse link corresponding to th… |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.8 | ColumnfutRMTeLinkOutgoingIfId | read-create | current | If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR. For num… |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.9 | ColumnfutRMTeLinkMaxBw | read-create | current | Maximum Bandwidth of the TE Link |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.10 | ColumnfutRMTeLinkMaxResBw | read-create | current | Maximum Reservable Bandwidth of the TE Link |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.11 | ColumnfutRMTeLinkAreaId | read-create | current | AreaId of the area to which this TE link belongs to. For forwarding adjacency link this variable must be set to indicate the area id of the TE link. |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.12 | ColumnfutRMTeLinkInfoType | read-create | current | This is to indicate the link information type. This information is very crucial for proper generation of Traffic Engineering LSAs. areaIdInfo Resource Manager … |
| 1.3.6.1.4.1.10876.101.1.10.1.2.1.13 | ColumnfutRMTeLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.10876.101.1.10.1.3 | TablefutRMTeLinkSwDescriptorTable | not-accessible | current | This table specifies the link descriptors associated with the TE links. |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1 | RowfutRMTeLinkSwDescriptorEntry | not-accessible | current | An entry in this table is created for every TE link descriptor. An ifEntry in the ifTable must exist before a futRMTeLinkDescriptorEntry using the same ifIndex… |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1.1 | ColumnfutRMTeLinkSwDescriptorId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1.2 | ColumnfutRMTeLinkSwDescrSwitchingCap | read-create | current | This attribute specifies the TE link switching capability information. |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1.3 | ColumnfutRMTeLinkSwDescrEncodingType | read-create | current | This attribute specifies the TE link encoding type. |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1.4 | ColumnfutRMTeLinkSwDescrMinLSPBandwidth | read-create | current | This attribute specifies the minimum reservable bandwidth on the TE link. |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1.5 | ColumnfutRMTeLinkSwDescrMTU | read-create | current | This attribute specifies the maximum MTU size to use on this link for forwarding data packets. |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1.6 | ColumnfutRMTeLinkSwDescrIndication | read-create | current | This attribute indicates whether the interface supports standard or arbitrary SONET/SDH is encoded in 1 octet field. This is 0 if the interface supports standa… |
| 1.3.6.1.4.1.10876.101.1.10.1.3.1.7 | ColumnfutRMTeLinkSwDescrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be changed if futRMTeLinkDescrRowStatus is in active(1) s… |
| 1.3.6.1.4.1.10876.101.1.10.1.4 | TablefutRMTeLinkSwDescrMaxBwTable | not-accessible | current | This table specifies the link Maxbandwidths associated with the TE links. |
| 1.3.6.1.4.1.10876.101.1.10.1.4.1 | RowfutRMTeLinkSwDescrMaxBwEntry | not-accessible | current | An entry in this table is created for each TE link interface. An ifEntry in the ifTable must exist before a futRMTeLinkSwDescrMaxBwEntry using the same ifIndex… |
| 1.3.6.1.4.1.10876.101.1.10.1.4.1.1 | ColumnfutRMTeLinkSwDescrMaxBwPriority | not-accessible | current | This object specifies priority at which this MaxLSPBandwidth is available. |
| 1.3.6.1.4.1.10876.101.1.10.1.4.1.2 | ColumnfutRMTeLinkSwDescrMaxLSPBandwidth | read-create | current | This attribute specifies the Maximum Link Bandwidth of the TE link. Maximum LSP bandwidth is carried per priority, and may vary as LSPs are set up and torn dow… |
| 1.3.6.1.4.1.10876.101.1.10.1.4.1.3 | ColumnfutRMTeLinkSwDescrMaxBwRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be changed if futRMTeLinkSwDescrMaxBwRowStatus is in acti… |
| 1.3.6.1.4.1.10876.101.1.10.1.5 | TablefutRMTeLinkSrlgTable | not-accessible | current | This table specifies the SRLGs associated with TE links. |
| 1.3.6.1.4.1.10876.101.1.10.1.5.1 | RowfutRMTeLinkSrlgEntry | not-accessible | current | An entry in this table contains information about a SRLG associated with a TE link. An ifEntry in the ifTable must exist before a futRMTeLinkSrlgEntry using th… |
| 1.3.6.1.4.1.10876.101.1.10.1.5.1.1 | ColumnfutRMTeLinkSrlg | not-accessible | current | This identifies a SRLG supported by the TE link. An SRLG is identified with a 32 bit number that is unique within an IGP domain. Zero is a valid SRLG number. |
| 1.3.6.1.4.1.10876.101.1.10.1.5.1.2 | ColumnfutRMTeLinkSrlgRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified if futRMTeLinkSrlgRowStatus is active(1). |
| 1.3.6.1.4.1.10876.101.1.10.1.6 | TablefutRMTeLinkBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth table for TE links. |
| 1.3.6.1.4.1.10876.101.1.10.1.6.1 | RowfutRMTeLinkBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth of TE links. An ifEntry in the ifTable must exist before a futRMTeLinkBandwidthE… |
| 1.3.6.1.4.1.10876.101.1.10.1.6.1.1 | ColumnfutRMTeLinkBandwidthPriority | not-accessible | current | This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering Extensions to OSPF Version 2' document. |
| 1.3.6.1.4.1.10876.101.1.10.1.6.1.2 | ColumnfutRMTeLinkUnreservedBandwidth | read-create | current | This attribute specifies the TE link unreserved bandwidth at priority p. |
| 1.3.6.1.4.1.10876.101.1.10.1.6.1.3 | ColumnfutRMTeLinkBandwidthRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when futRMTeLinkBandwidthRowStatus is active(… |
| 1.3.6.1.4.1.10876.101.1.10.2 | NodefutRMTeLinkConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TeLinkEncodingType | INTEGER { packet(1), ethernet(2), ansiEtsiPdh(3), sdhItuSonetAnsi(5), digitalWrapper(7), lambda(8), fiber(9), fiberChannel(11) } | current | Link encoding type as specified in 'GMPLS Signaling Functional Description' document. The values specified in this document are not contiguous. |
| TeLinkPriority | Unsigned32 (0..7) | current | This type is used to represent a priority. Each connection is assigned a priority. This priority is used when accounting for bandwidth on TE links or component links, for resource allocation and for rerouting purposes. … |