SUPERMICRO-RSTP-MIB
79 objects
MIB for Rapid Spanning Tree Algorithm & Protocol
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBaseBridgeAddress dot1dStpDesignatedRoot dot1dStpPortState |
| RSTP-MIB | dot1dStpVersion |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.79 | IdentityfutureRstMIB | MIB for Rapid Spanning Tree Algorithm & Protocol | ||
| 1.3.6.1.4.1.10876.101.1.79.1 | Nodedot1wFutureRst | |||
| 1.3.6.1.4.1.10876.101.1.79.1.1 | ScalarfsRstSystemControl | read-write | current | The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP shoul… |
| 1.3.6.1.4.1.10876.101.1.79.1.2 | ScalarfsRstModuleStatus | read-write | current | The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates t… |
| 1.3.6.1.4.1.10876.101.1.79.1.3 | ScalarfsRstTraceOption | read-write | current | This object is used to enable Trace Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte int… |
| 1.3.6.1.4.1.10876.101.1.79.1.4 | ScalarfsRstDebugOption | read-write | current | This object is used to enable Debug Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte i… |
| 1.3.6.1.4.1.10876.101.1.79.1.5 | ScalarfsRstRstpUpCount | read-only | current | The number of times RSTP Module has been enabled. |
| 1.3.6.1.4.1.10876.101.1.79.1.6 | ScalarfsRstRstpDownCount | read-only | current | The number of times RSTP Module has been disabled. |
| 1.3.6.1.4.1.10876.101.1.79.1.7 | ScalarfsRstBufferFailureCount | read-only | current | The number of times buffer overflows/failures have occurred. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.10876.101.1.79.1.8 | ScalarfsRstMemAllocFailureCount | read-only | current | The number of times memory allocation failures have occurred. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.10876.101.1.79.1.9 | ScalarfsRstNewRootIdCount | read-only | current | The number of times this Bridge has detected a new Root in the topology. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.10876.101.1.79.1.10 | ScalarfsRstPortRoleSelSmState | read-only | current | This indicates the current state of the Port Role Selection State Machine. This object will hold the value 'initbridge' when the Port Role Selection state mach… |
| 1.3.6.1.4.1.10876.101.1.79.1.11 | ScalarfsRstOldDesignatedRoot | read-only | current | The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. |
| 1.3.6.1.4.1.10876.101.1.79.1.12 | TablefsRstPortExtTable | not-accessible | current | This is a table that is an extension to the dot1dStpExtPortTable. This contains object(s) that are Port-based. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1 | RowfsRstPortExtEntry | not-accessible | current | Each entry in this table is for each port present in the system. This table is indexed by the fsRstPort. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.1 | ColumnfsRstPort | not-accessible | current | A unique value, greater than zero, indicating the Port number. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.2 | ColumnfsRstPortRole | read-only | current | This indicates the current Port Role assumed by this Port. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.3 | ColumnfsRstPortOperVersion | read-only | current | This indicates whether the Port is operationally in the Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting RST BPDUs or Config/TCN BPD… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.4 | ColumnfsRstPortInfoSmState | read-only | current | This indicates the current state of the Port Information state machine. This object will hold the value 'disabled' when the Port Information state machine is i… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.5 | ColumnfsRstPortMigSmState | read-only | current | This indicates the current state of the Port Protocol Migration state machine. This object will hold the value 'checkingrstp' when the Protocol Migration state… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.6 | ColumnfsRstPortRoleTransSmState | read-only | current | This indicates the current state of the Port Role Transition state machine. This object will hold the value 'init' when the Port Role Transition state machine … |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.7 | ColumnfsRstPortStateTransSmState | read-only | current | This indicates the current state of the Port State Transition state machine. This object will hold the value 'discarding' when the Port State Transition state … |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.8 | ColumnfsRstPortTopoChSmState | read-only | current | This indicates the current state of the Topology Change state machine. This object will hold the value 'inactive' when the Topology Change state machine is in … |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.9 | ColumnfsRstPortTxSmState | read-only | current | This indicates the current state of the Port Transmit state machine. This object will hold the value 'transmitinit' when the Port Transmit state machine is in … |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.10 | ColumnfsRstPortRxRstBpduCount | read-only | current | The number of RST BPDUs that have been received on this Port. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.11 | ColumnfsRstPortRxConfigBpduCount | read-only | current | The number of Config BPDUs that have been received on this Port. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.12 | ColumnfsRstPortRxTcnBpduCount | read-only | current | The number of TCN BPDUs that have been received on this Port. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.13 | ColumnfsRstPortTxRstBpduCount | read-only | current | The number of RST BPDUs that have been transmitted by this Port. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.14 | ColumnfsRstPortTxConfigBpduCount | read-only | current | The number of Config BPDUs that have been transmitted by this Port. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.15 | ColumnfsRstPortTxTcnBpduCount | read-only | current | The number of TCN BPDUs that have been transmitted by this Port. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.16 | ColumnfsRstPortInvalidRstBpduRxCount | read-only | current | The number of invalid RSTP BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.17 | ColumnfsRstPortInvalidConfigBpduRxCount | read-only | current | The number of invalid Configuration BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.18 | ColumnfsRstPortInvalidTcnBpduRxCount | read-only | current | The number of invalid TCN BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.19 | ColumnfsRstPortProtocolMigrationCount | read-only | current | The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP. A Trap is generated on… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.20 | ColumnfsRstPortEffectivePortState | read-only | current | The effective Operational state of the port. This object will be set to TRUE only when the port is operationally up in the interface manager and the force Port… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.21 | ColumnfsRstPortAutoEdge | read-write | current | This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.22 | ColumnfsRstPortRestrictedRole | read-write | current | A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priorit… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.23 | ColumnfsRstPortRestrictedTCN | read-write | current | A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This pa… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.24 | ColumnfsRstPortEnableBPDURx | read-write | current | A Boolean value set by management. If FALSE, the BPDUs received on the port are ignored. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.25 | ColumnfsRstPortEnableBPDUTx | read-write | current | A Boolean value set by management. If FALSE, no BPDUs are transmitted by this port. This variable should be FALSE before configuring port as a Layer Two Gatewa… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.26 | ColumnfsRstPortPseudoRootId | read-write | current | In RSTP Bridge, the fsRstPortPseudoRootId parameter value. By default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway Port as… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.27 | ColumnfsRstPortIsL2Gp | read-write | current | A Boolean value set by management. If TRUE, then port is functioning as a Layer Two Gateway Port. The fsRstPortEnableBPDUTx should be FALSE to set fsRstPortIsL… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.28 | ColumnfsRstPortLoopGuard | read-write | current | A Boolean value set by management. If TRUE, then it will not age out the information even if the peer does not send information. If the port continues to recei… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.29 | ColumnfsRstPortRcvdEvent | read-only | current | This object gives information about the recently received event in the system. Currently we support only ConfigurationEvent. |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.30 | ColumnfsRstPortRcvdEventSubType | read-only | current | This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstPor… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.31 | ColumnfsRstPortRcvdEventTimeStamp | read-only | current | This object gives the time stamp (in milli seconds) at which the event specified by the object fsRstPortRcvdEvent was received in the system. This object was i… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.32 | ColumnfsRstPortStateChangeTimeStamp | read-only | current | This object gives the time stamp (in milli seconds) when the port state is updated to forwarding path for any instance on this port. This object is introduced … |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.33 | ColumnfsRstPortRowStatus | read-create | current | This object is used to create or delete interfaces at RSTP module level.Ports can be created at RSTP module level only for ports that have been created in Inte… |
| 1.3.6.1.4.1.10876.101.1.79.1.12.1.34 | ColumnfsRstPortBpduGuard | read-write | current | This configures the BPDU guard feature on this port and has higher priority over Global BPDU Guard. Enable - prevents temporary loops and applicable to ports a… |
| 1.3.6.1.4.1.10876.101.1.79.1.13 | ScalarfsRstDynamicPathcostCalculation | read-write | current | This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calc… |
| 1.3.6.1.4.1.10876.101.1.79.1.14 | ScalarfsRstCalcPortPathCostOnSpeedChg | read-write | current | This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended … |
| 1.3.6.1.4.1.10876.101.1.79.1.15 | ScalarfsRstRcvdEvent | read-only | current | This object gives information about the recently received event in the system. Currently we support only ConfigurationEvent. |
| 1.3.6.1.4.1.10876.101.1.79.1.16 | ScalarfsRstRcvdEventSubType | read-only | current | This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstRcv… |
| 1.3.6.1.4.1.10876.101.1.79.1.17 | ScalarfsRstRcvdEventTimeStamp | read-only | current | The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent was received in the system at STP module for the last time. This object… |
| 1.3.6.1.4.1.10876.101.1.79.1.18 | ScalarfsRstRcvdPortStateChangeTimeStamp | read-only | current | The time stamp (in milli seconds) at which port state has been changed in the system. This object is introduced to measure the convergence time in RSTP module. |
| 1.3.6.1.4.1.10876.101.1.79.1.19 | ScalarfsRstBpduGuard | read-write | current | This object configures BPDU guard globally in RSTP and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables… |
| 1.3.6.1.4.1.10876.101.1.79.2 | Nodedot1wFsRstTrapsControl | |||
| 1.3.6.1.4.1.10876.101.1.79.2.1 | ScalarfsRstSetTraps | read-write | current | This object is used to enable and disable specific RSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol u… |
| 1.3.6.1.4.1.10876.101.1.79.2.2 | ScalarfsRstGenTrapType | read-only | current | The general events like none - none of the below values up - protocol UP, down - protocol DOWN |
| 1.3.6.1.4.1.10876.101.1.79.2.3 | ScalarfsRstErrTrapType | read-only | current | The error event like none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure |
| 1.3.6.1.4.1.10876.101.1.79.2.4 | TablefsRstPortTrapNotificationTable | not-accessible | current | This table is used to store the notification information occurred in each of the port for protocol migration and invalid packet received |
| 1.3.6.1.4.1.10876.101.1.79.2.4.1 | RowfsRstPortTrapNotificationEntry | not-accessible | current | This entry is used to store the notification information |
| 1.3.6.1.4.1.10876.101.1.79.2.4.1.1 | ColumnfsRstPortTrapIndex | not-accessible | current | A unique value, greater than zero, indicating the Port number. |
| 1.3.6.1.4.1.10876.101.1.79.2.4.1.2 | ColumnfsRstPortMigrationType | read-only | current | Port Protocol migration type occurred in the port |
| 1.3.6.1.4.1.10876.101.1.79.2.4.1.3 | ColumnfsRstPktErrType | read-only | current | Type of invalid packet received in each of the port |
| 1.3.6.1.4.1.10876.101.1.79.2.4.1.4 | ColumnfsRstPktErrVal | read-only | current | Packet error value corresponding to the above type |
| 1.3.6.1.4.1.10876.101.1.79.2.4.1.5 | ColumnfsRstPortRoleType | read-only | current | Particular Role Selected for the Port |
| 1.3.6.1.4.1.10876.101.1.79.2.4.1.6 | ColumnfsRstOldRoleType | read-only | current | Particular Role which is existing for the Port |
| 1.3.6.1.4.1.10876.101.1.79.3 | Nodedot1wFutureRstTraps | |||
| 1.3.6.1.4.1.10876.101.1.79.3.0 | NodefsRstTraps | |||
| 1.3.6.1.4.1.10876.101.1.79.3.0.1 | NotificationfsRstGenTrap | current | Generated when any of the general events like protocol up or protocol down occurrs | |
| 1.3.6.1.4.1.10876.101.1.79.3.0.2 | NotificationfsRstErrTrap | current | Generated when any of the error events like memory failure or buffer failure occurs | |
| 1.3.6.1.4.1.10876.101.1.79.3.0.3 | NotificationfsRstNewRootTrap | current | Generated whenever a new root bridge is selected in the topology | |
| 1.3.6.1.4.1.10876.101.1.79.3.0.4 | NotificationfsRstTopologyChgTrap | current | Generated when topology change is detected | |
| 1.3.6.1.4.1.10876.101.1.79.3.0.5 | NotificationfsRstProtocolMigrationTrap | current | Generated when port protocol migration happens in the port | |
| 1.3.6.1.4.1.10876.101.1.79.3.0.6 | NotificationfsRstInvalidBpduRxdTrap | current | Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time | |
| 1.3.6.1.4.1.10876.101.1.79.3.0.7 | NotificationfsRstNewPortRoleTrap | current | Generated whenever a new role is selected for the port | |
| 1.3.6.1.4.1.10876.101.1.79.3.0.8 | NotificationfsRstHwFailureTrap | current | Generated whenever an NPAPI call, that is invoked from the protocol to program the hardware port state, fails. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |