MIB Viewer

SUPERMICRO-RTM-MIB

44 objects
This mib module is for Route redidtribution support provided by Route Table Manager
Imported Objects
SNMPv2-SMIenterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.10876.101.1.107IdentityfuturertmThis mib module is for Route redidtribution support provided by Route Table Manager
1.3.6.1.4.1.10876.101.1.107.1NodefsrrdScalar
1.3.6.1.4.1.10876.101.1.107.1.1ScalarfsRrdRouterIdread-writecurrentThe BGP/OSPF Router Id.
1.3.6.1.4.1.10876.101.1.107.1.2ScalarfsRrdFilterByOspfTagread-writecurrentTo enable distribution of routes from OSPF to BGP/IDRP based on the OSPF tag or the various subfields of the OSPF tag (ref RFC1745 sec 2.1). This filter takes …
1.3.6.1.4.1.10876.101.1.107.1.3ScalarfsRrdFilterOspfTagread-writecurrentThe OSPF tag based on which routes have to be filtered for export to BGP/IDRP
1.3.6.1.4.1.10876.101.1.107.1.4ScalarfsRrdFilterOspfTagMaskread-writecurrentThe bitmask to be applied to fsRrdFilterOspfTag for comparison. This bitmask specifies the fields of the OSPF tag to be considered for filtering.
1.3.6.1.4.1.10876.101.1.107.1.5ScalarfsRrdRouterASNumberread-writecurrentThe Autonomous system number in which this router is running.
1.3.6.1.4.1.10876.101.1.107.1.6ScalarfsRrdAdminStatusread-writecurrentThe Admin status of the RTM. This object can be set to enabled only after setting the AS number and the Router ID to a valid value.
1.3.6.1.4.1.10876.101.1.107.1.7ScalarfsRtmThrottleLimitread-writecurrentIn order to avoid CPU hogs while processing the routes, the number of routes being processed is restricted via this throlle limit.
1.3.6.1.4.1.10876.101.1.107.2TablefsRrdControlTablenot-accessiblecurrentControl Table for configuring routes allowed/denied for export.
1.3.6.1.4.1.10876.101.1.107.2.1RowfsRrdControlEntrynot-accessiblecurrentAn entry of fsRrdControlTable.
1.3.6.1.4.1.10876.101.1.107.2.1.1ColumnfsRrdControlDestIpAddressnot-accessiblecurrentThe destination IP address of this route. This object may not take a Multicast (Class D) address or the reserved address (Class E) value. Any assignment (impli…
1.3.6.1.4.1.10876.101.1.107.2.1.2ColumnfsRrdControlNetMasknot-accessiblecurrentIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do n…
1.3.6.1.4.1.10876.101.1.107.2.1.3ColumnfsRrdControlSourceProtoread-writecurrentThe Identifier of the source routing protocol. A value of zero will be interpreted as 'any', which may be used to configure interface based route redistributio…
1.3.6.1.4.1.10876.101.1.107.2.1.4ColumnfsRrdControlDestProtoread-writecurrent
1.3.6.1.4.1.10876.101.1.107.2.1.5ColumnfsRrdControlRouteExportFlagread-writecurrentThis flag specifies whether the route is allowed for export or denied.
1.3.6.1.4.1.10876.101.1.107.2.1.6ColumnfsRrdControlRowStatusread-writecurrentThe status of this row by which a new row can be created or deleted according to the SMIv2 conventions.
1.3.6.1.4.1.10876.101.1.107.3TablefsRrdRoutingProtoTablenot-accessiblecurrentRegistration Table for the different routing protocols. This table is read-only and reflects the information of routing protocols held by the Route Table Manag…
1.3.6.1.4.1.10876.101.1.107.3.1RowfsRrdRoutingProtoEntrynot-accessiblecurrentAn entry in to the fsRrdRoutingProtoTable.
1.3.6.1.4.1.10876.101.1.107.3.1.1ColumnfsRrdRoutingProtoIdnot-accessiblecurrentThe Identifier of the routing protocol registered with the routing table manager
1.3.6.1.4.1.10876.101.1.107.3.1.2ColumnfsRrdRoutingRegnIdread-onlycurrentThe Registeration ID assigned by the RTM for this Routing Protocol
1.3.6.1.4.1.10876.101.1.107.3.1.3ColumnfsRrdRoutingProtoTaskIdentread-onlycurrentThe Name/Identifier of the Routing Task
1.3.6.1.4.1.10876.101.1.107.3.1.4ColumnfsRrdRoutingProtoQueueIdentread-onlycurrentThe Name/Identifier of the Message Queue to which messages to the Routing Task are posted.
1.3.6.1.4.1.10876.101.1.107.3.1.5ColumnfsRrdAllowOspfAreaRoutesread-writecurrentA single configuration parameter that enables administator to have a contol over PERMIT/deny of all OSPF inter-area and intra-area address/mask pairs to be exp…
1.3.6.1.4.1.10876.101.1.107.3.1.6ColumnfsRrdAllowOspfExtRoutesread-writecurrentA single configuration parameter that enables administator to have a contol over PERMIT/deny of all OSPF Type 1 and Type 2 Exteral address/mask pairs to be exp…
1.3.6.1.4.1.10876.101.1.107.4TablefsRtmCommonRouteTablenot-accessiblecurrentThis entity's IP Routing table. This table can be used to view all the routes present in the system
1.3.6.1.4.1.10876.101.1.107.4.1RowfsRtmCommonRouteEntrynot-accessiblecurrentA particular route to a particular destina- tion, under a particular policy.
1.3.6.1.4.1.10876.101.1.107.4.1.1ColumnfsRtmCommonRouteDestnot-accessiblecurrentThe destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o…
1.3.6.1.4.1.10876.101.1.107.4.1.2ColumnfsRtmCommonRouteMasknot-accessiblecurrentIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the fsRtmCommonRouteDest field. For those systems that…
1.3.6.1.4.1.10876.101.1.107.4.1.3ColumnfsRtmCommonRouteTosnot-accessiblecurrentThe policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specif…
1.3.6.1.4.1.10876.101.1.107.4.1.4ColumnfsRtmCommonRouteNextHopnot-accessiblecurrentOn remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
1.3.6.1.4.1.10876.101.1.107.4.1.5ColumnfsRtmCommonRouteIfIndexread-createcurrentThe ifIndex value which identifies the local interface through which the next hop of this route should be reached.
1.3.6.1.4.1.10876.101.1.107.4.1.6ColumnfsRtmCommonRouteTyperead-createcurrentThe type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is …
1.3.6.1.4.1.10876.101.1.107.4.1.7ColumnfsRtmCommonRouteProtoread-onlycurrentThe routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support …
1.3.6.1.4.1.10876.101.1.107.4.1.8ColumnfsRtmCommonRouteAgeread-onlycurrentThe number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug…
1.3.6.1.4.1.10876.101.1.107.4.1.9ColumnfsRtmCommonRouteInforead-createcurrentA reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the r…
1.3.6.1.4.1.10876.101.1.107.4.1.10ColumnfsRtmCommonRouteNextHopASread-createcurrentThe Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's fsRtmCommonRouteProt…
1.3.6.1.4.1.10876.101.1.107.4.1.11ColumnfsRtmCommonRouteMetric1read-createcurrentThe primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's fsRtmCommonRouteProto v…
1.3.6.1.4.1.10876.101.1.107.4.1.12ColumnfsRtmCommonRoutePrivateStatusread-createcurrentThis object is applicapble only for static routes. If the private status is enabled, this route can not be redistributed to other routing protocols.Else the ro…
1.3.6.1.4.1.10876.101.1.107.4.1.13ColumnfsRtmCommonRouteStatusread-createcurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.10876.101.1.107.4.1.14ColumnfsRtmCommonRouteProviderread-writecurrentThis object is used to indicates the source where the route was learned.
1.3.6.1.4.1.10876.101.1.107.5NodefsRtmRedTest
1.3.6.1.4.1.10876.101.1.107.5.1ScalarfsRtmRedEntryTimeread-onlycurrentTime when the node starts entering active state from standby state
1.3.6.1.4.1.10876.101.1.107.5.2ScalarfsRtmRedExitTimeread-onlycurrentTime when the node completes entering active state from standby state