SUPERMICRO-RTM6-MIB
29 objects
This mib module is for RTMv6 module
Imported Objects
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.92 | Identityfuturertm6 | This mib module is for RTMv6 module | ||
| 1.3.6.1.4.1.10876.101.1.92.1 | Nodefsrrd6Scalar | |||
| 1.3.6.1.4.1.10876.101.1.92.1.1 | ScalarfsRrd6RouterId | read-write | current | The 4-byte Identifier value that uniquely identifies the router in its operational environment. This can be set only if the fsRrd6AdminStatus is disabled. |
| 1.3.6.1.4.1.10876.101.1.92.1.2 | ScalarfsRrd6FilterByOspfTag | read-write | current | To enable distribution of routes based on the tag value (ref RFC1745 sec 2.1). This filter takes precedence over the common RRD6 control table. |
| 1.3.6.1.4.1.10876.101.1.92.1.3 | ScalarfsRrd6FilterOspfTag | read-write | current | The tag based on which routes have to be filtered for export to routing protocols |
| 1.3.6.1.4.1.10876.101.1.92.1.4 | ScalarfsRrd6FilterOspfTagMask | read-write | current | The bitmask to be applied to fsRrd6FilterOspfTag for comparison. This bitmask specifies the fields of the OSPF tag to be considered for filtering. |
| 1.3.6.1.4.1.10876.101.1.92.1.5 | ScalarfsRrd6RouterASNumber | read-write | current | The Autonomous system number in which this router is running. |
| 1.3.6.1.4.1.10876.101.1.92.1.6 | ScalarfsRrd6AdminStatus | read-write | current | The Admin status of the RTM. This object can be set to enabled only after setting the AS number and the Router ID to a valid value. |
| 1.3.6.1.4.1.10876.101.1.92.1.7 | ScalarfsRrd6Trace | read-write | current | Enables the tracing in the selected submodule in RTM6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - … |
| 1.3.6.1.4.1.10876.101.1.92.1.8 | ScalarfsRrd6ThrotLimit | read-write | current | In RTM6 operations which hogs CPU for a long time are being throttled. These events will process only limited number of routes set by this object for each iter… |
| 1.3.6.1.4.1.10876.101.1.92.2 | TablefsRrd6ControlTable | not-accessible | current | Control Table for configuring routes allowed/denied for export. |
| 1.3.6.1.4.1.10876.101.1.92.2.1 | RowfsRrd6ControlEntry | not-accessible | current | An entry of fsRrd6ControlTable. |
| 1.3.6.1.4.1.10876.101.1.92.2.1.1 | ColumnfsRrd6ControlDestIpAddress | not-accessible | current | The destination IPv6 address of this route. |
| 1.3.6.1.4.1.10876.101.1.92.2.1.2 | ColumnfsRrd6ControlNetMaskLen | not-accessible | current | Indicate the prefix len and the derived reverse mask should be logical-ANDed with the destination address. The mask is also used to specify the range of IP add… |
| 1.3.6.1.4.1.10876.101.1.92.2.1.3 | ColumnfsRrd6ControlSourceProto | read-write | current | The Identifier of the source routing protocol. A value of zero will be interpreted as 'any', which matches route from all protocols. This object should be set … |
| 1.3.6.1.4.1.10876.101.1.92.2.1.4 | ColumnfsRrd6ControlDestProto | read-write | current | The identifier of the destination routing protocol. This field is a bit mask, a 1 indicates that the route has to be exported to the routing protocol correspon… |
| 1.3.6.1.4.1.10876.101.1.92.2.1.5 | ColumnfsRrd6ControlRouteExportFlag | read-write | current | This flag specifies whether the route is allowed for export or denied. If the ALL ROUTE entry has this value as permit, then all other entries can be set only … |
| 1.3.6.1.4.1.10876.101.1.92.2.1.6 | ColumnfsRrd6ControlRowStatus | read-write | current | The status of this row by which a new row can be created or deleted according to the SMIv2 conventions. The values supported for set operation are - createandw… |
| 1.3.6.1.4.1.10876.101.1.92.3 | TablefsRrd6RoutingProtoTable | not-accessible | current | Registration Table for the different routing protocols. This table is read-only and reflects the information of routing protocols held by the Route Table Manag… |
| 1.3.6.1.4.1.10876.101.1.92.3.1 | RowfsRrd6RoutingProtoEntry | not-accessible | current | An entry in to the fsRrd6RoutingProtoTable. |
| 1.3.6.1.4.1.10876.101.1.92.3.1.1 | ColumnfsRrd6RoutingProtoId | not-accessible | current | The Identifier of the routing protocol registered with the routing table manager |
| 1.3.6.1.4.1.10876.101.1.92.3.1.2 | ColumnfsRrd6RoutingRegnId | read-only | current | The Registeration ID assigned by the RTM for this Routing Protocol |
| 1.3.6.1.4.1.10876.101.1.92.3.1.3 | ColumnfsRrd6RoutingProtoTaskIdent | read-only | current | The Name/Identifier of the Routing Task |
| 1.3.6.1.4.1.10876.101.1.92.3.1.4 | ColumnfsRrd6RoutingProtoQueueIdent | read-only | current | The Name/Identifier of the Message Queue to which messages to the Routing Task are posted. |
| 1.3.6.1.4.1.10876.101.1.92.3.1.5 | ColumnfsRrd6AllowOspfAreaRoutes | read-write | current | A single configuration to PERMIT all OSPF inter-area and intra-area address/mask pairs to be exported into this routing protocol. This configuration takes prec… |
| 1.3.6.1.4.1.10876.101.1.92.3.1.6 | ColumnfsRrd6AllowOspfExtRoutes | read-write | current | A single configuration to PERMIT all OSPF Type 1 and Type 2 Exteral address/mask pairs to be exported into this routing protocol. This configuration together w… |
| 1.3.6.1.4.1.10876.101.1.92.4 | NodefsRtm6RedTest | |||
| 1.3.6.1.4.1.10876.101.1.92.4.1 | ScalarfsRtm6RedEntryTime | read-only | current | Time when the node starts entering active state from standby state |
| 1.3.6.1.4.1.10876.101.1.92.4.2 | ScalarfsRtm6RedExitTime | read-only | current | Time when the node completes entering active state from standby state |