SUPERMICRO-RTM6MI-MIB
33 objects
This mib module is for RTMv6 module with virtual routing and forwarding support
Imported Objects
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.32 | IdentityfsMIRtm6 | This mib module is for RTMv6 module with virtual routing and forwarding support | ||
| 1.3.6.1.4.1.10876.101.2.32.1 | NodefsMIRtm6Scalar | |||
| 1.3.6.1.4.1.10876.101.2.32.1.1 | ScalarfsMIRtm6GlobalTrace | read-write | current | This is a global RTMv6 trace and not specific to any RTMv6 context. Enables the tracing in the selected submodule in RTM6. A 32 bit integer is used to store th… |
| 1.3.6.1.4.1.10876.101.2.32.1.2 | ScalarfsMIRtm6ThrotLimit | read-write | current | In RTM6 operations which hogs CPU for a long time are being throttled. These events will process only limited number of routes set by this object for each iter… |
| 1.3.6.1.4.1.10876.101.2.32.2 | TablefsMIRtm6Table | not-accessible | current | Information describing the parameters of RTMv6's Virtual context |
| 1.3.6.1.4.1.10876.101.2.32.2.1 | RowfsMIRtm6Entry | not-accessible | current | Information describing the parameters of one of the RTMv6's virtual context |
| 1.3.6.1.4.1.10876.101.2.32.2.1.1 | ColumnfsMIRtm6ContextId | not-accessible | current | A 32-bit unique context id identifing the RTMv6 virtual Context Minimum value of context ID is 0 (this is for defualt Virtual context. The Max context ID is sy… |
| 1.3.6.1.4.1.10876.101.2.32.2.1.2 | ColumnfsMIRrd6RouterId | read-write | current | The 4-byte Identifier value that uniquely identifies the router in its operational environment. This can be set only if the fsMIRrd6AdminStatus is disabled. Ro… |
| 1.3.6.1.4.1.10876.101.2.32.2.1.3 | ColumnfsMIRrd6FilterByOspfTag | read-write | current | To enable distribution of routes based on the tag value (ref RFC1745 sec 2.1). This filter takes precedence over the common RRD6 control table. |
| 1.3.6.1.4.1.10876.101.2.32.2.1.4 | ColumnfsMIRrd6FilterOspfTag | read-write | current | The tag based on which routes have to be filtered for export to routing protocols |
| 1.3.6.1.4.1.10876.101.2.32.2.1.5 | ColumnfsMIRrd6FilterOspfTagMask | read-write | current | The bitmask to be applied to fsMIRrd6FilterOspfTag for comparison. This bitmask specifies the fields of the OSPF tag to be considered for filtering. |
| 1.3.6.1.4.1.10876.101.2.32.2.1.6 | ColumnfsMIRrd6RouterASNumber | read-write | current | The Autonomous system number in which this router is running. |
| 1.3.6.1.4.1.10876.101.2.32.2.1.7 | ColumnfsMIRrd6AdminStatus | read-write | current | The Admin status of the RTMv6 virtual context. This object can be set to enabled only after setting the AS number and the Router ID to a valid value. |
| 1.3.6.1.4.1.10876.101.2.32.2.1.8 | ColumnfsMIRrd6Trace | read-write | current | This is used to define the trace level in each RTMv6 virtual context. Enables the tracing in the selected submodule in RTM6v6 context. A 32 bit integer is used… |
| 1.3.6.1.4.1.10876.101.2.32.3 | TablefsMIRrd6ControlTable | not-accessible | current | Control Table for configuring routes allowed/denied for export in the RTMv6 virtual Context. |
| 1.3.6.1.4.1.10876.101.2.32.3.1 | RowfsMIRrd6ControlEntry | not-accessible | current | An entry of fsMIRrd6ControlTable. |
| 1.3.6.1.4.1.10876.101.2.32.3.1.1 | ColumnfsMIRrd6ControlDestIpAddress | not-accessible | current | The destination IPv6 address of this route. |
| 1.3.6.1.4.1.10876.101.2.32.3.1.2 | ColumnfsMIRrd6ControlNetMaskLen | not-accessible | current | Indicate the prefix len and the derived reverse mask should be logical-ANDed with the destination address. The mask is also used to specify the range of IP add… |
| 1.3.6.1.4.1.10876.101.2.32.3.1.3 | ColumnfsMIRrd6ControlSourceProto | read-write | current | The Identifier of the source routing protocol. A value of zero will be interpreted as 'any', which matches route from all protocols. This object should be set … |
| 1.3.6.1.4.1.10876.101.2.32.3.1.4 | ColumnfsMIRrd6ControlDestProto | read-write | current | The identifier of the destination routing protocol. This field is a bit mask, a 1 indicates that the route has to be exported to the routing protocol correspon… |
| 1.3.6.1.4.1.10876.101.2.32.3.1.5 | ColumnfsMIRrd6ControlRouteExportFlag | read-write | current | This flag specifies whether the route is allowed for export or denied. If the ALL ROUTE entry has this value as permit, then all other entries can be set only … |
| 1.3.6.1.4.1.10876.101.2.32.3.1.6 | ColumnfsMIRrd6ControlRowStatus | read-write | current | The status of this row by which a new row can be created or deleted according to the SMIv2 conventions. The values supported for set operation are - createandw… |
| 1.3.6.1.4.1.10876.101.2.32.4 | TablefsMIRrd6RoutingProtoTable | not-accessible | current | Registration Table for the different routing protocols. This table is read-only and reflects the information of routing protocols held by the Route Table Manag… |
| 1.3.6.1.4.1.10876.101.2.32.4.1 | RowfsMIRrd6RoutingProtoEntry | not-accessible | current | An entry in to the fsMIRrd6RoutingProtoTable. |
| 1.3.6.1.4.1.10876.101.2.32.4.1.1 | ColumnfsMIRrd6RoutingProtoId | not-accessible | current | The Identifier of the routing protocol registered with the routing table manager |
| 1.3.6.1.4.1.10876.101.2.32.4.1.2 | ColumnfsMIRrd6RoutingRegnId | read-only | current | The Registeration ID assigned by the RTM for this Routing Protocol |
| 1.3.6.1.4.1.10876.101.2.32.4.1.3 | ColumnfsMIRrd6RoutingProtoTaskIdent | read-only | current | The Name/Identifier of the Routing Task |
| 1.3.6.1.4.1.10876.101.2.32.4.1.4 | ColumnfsMIRrd6RoutingProtoQueueIdent | read-only | current | The Name/Identifier of the Message Queue to which messages to the Routing Task are posted. |
| 1.3.6.1.4.1.10876.101.2.32.4.1.5 | ColumnfsMIRrd6AllowOspfAreaRoutes | read-write | current | A single configuration to PERMIT all OSPF inter-area and intra-area address/mask pairs to be exported into this routing protocol. This configuration takes prec… |
| 1.3.6.1.4.1.10876.101.2.32.4.1.6 | ColumnfsMIRrd6AllowOspfExtRoutes | read-write | current | A single configuration to PERMIT all OSPF Type 1 and Type 2 Exteral address/mask pairs to be exported into this routing protocol. This configuration together w… |
| 1.3.6.1.4.1.10876.101.2.32.5 | NodefsMIRtm6RedTest | |||
| 1.3.6.1.4.1.10876.101.2.32.5.1 | ScalarfsMIRtm6RedEntryTime | read-only | current | Time when the node starts entering active state from standby state |
| 1.3.6.1.4.1.10876.101.2.32.5.2 | ScalarfsMIRtm6RedExitTime | read-only | current | Time when the node completes entering active state from standby state |