SUPERMICRO-SNOOP-MIB
199 objects
Added multicast profiles and port related configurations and statistics. Added support for group based VLAN classification. Added support for Provider Bridging (i.e double vlan) functionality. Added explicit host tracking feature support.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | PortList VlanIndex |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.105 | Identityfssnoop | Added multicast profiles and port related configurations and statistics. Added support for group based VLAN classification. Added support for Provider Bridging… | ||
| 1.3.6.1.4.1.10876.101.1.105.1 | NodefsSnoopSystem | |||
| 1.3.6.1.4.1.10876.101.1.105.2 | NodefsSnoopInst | |||
| 1.3.6.1.4.1.10876.101.1.105.2.1 | TablefsSnoopInstanceGlobalTable | not-accessible | current | This table contains multicast forwarding mode configuration for each instance running in the snooping switch |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1 | RowfsSnoopInstanceGlobalEntry | not-accessible | current | This table contains instance number and the multicast forwarding mode configuration for the particular instance |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.1 | ColumnfsSnoopInstanceGlobalInstId | not-accessible | current | Instance ID pertaining to the global configuration entry. |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.2 | ColumnfsSnoopInstanceGlobalMcastFwdMode | read-write | current | Indicates the mode to be used for building the forwarding table i.e, whether IP based or MAC address based. The hardware should support programming of S,G and … |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.3 | ColumnfsSnoopInstanceGlobalSystemControl | read-write | current | Snooping module is shutdown or started through this object. When set to 'start', resources required by the SNOOP module is allocated and the module starts runn… |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.4 | ColumnfsSnoopInstanceGlobalLeaveConfigLevel | read-write | current | A global configuration to specify if the leave processing mechanism needs to be configured at the vlan level or at the port level. When this object is set to v… |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.5 | ColumnfsSnoopInstanceGlobalEnhancedMode | read-create | current | This object is used to enable or disable the snooping module functioning in the enhanced mode. By default, the snooping module operates in the normal or defaul… |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.6 | ColumnfsSnoopInstanceGlobalReportProcessConfigLevel | read-write | current | A global configuration to specify if the report processing mechanism needs to be configured for the non-router ports or at the all ports level. When this objec… |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.7 | ColumnfsSnoopInstanceGlobalSparseMode | read-create | current | This object is used to enable or disable the snooping module functioning in the sparse mode. By default, the snooping module operates in the non-sparse mode. I… |
| 1.3.6.1.4.1.10876.101.1.105.2.1.1.8 | ColumnfsSnoopInstanceGlobalMulticastFilterStatus | read-write | current | This object is used to enable/disable the IGS multicast filtering feature. Interface mapping configurations will not be affected by this object status. |
| 1.3.6.1.4.1.10876.101.1.105.2.2 | TablefsSnoopInstanceConfigTable | not-accessible | current | This table contains global configuration of snooping for each instance running in switch |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1 | RowfsSnoopInstanceConfigEntry | not-accessible | current | This table contains instance number, address type and the list of global configuration for the particular instance and address type |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.1 | ColumnfsSnoopInstanceConfigInstId | not-accessible | current | Instance ID pertaining to the global configuration entry. |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.2 | ColumnfsSnoopInetAddressType | not-accessible | current | Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.3 | ColumnfsSnoopStatus | read-write | current | Enables or disables IGMP/MLD snooping in the system. When set to 'enabled', the IGS/MLDS module starts protocol operations. When set to 'disabled', the IGS/MLD… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.4 | ColumnfsSnoopProxyReportingStatus | read-write | current | Enables or disables proxy-reporting in the system. When proxy-reporting is 'enabled' the switch generates reports and forwards them to the router based on the … |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.5 | ColumnfsSnoopRouterPortPurgeInterval | read-write | deprecated | This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInter… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.6 | ColumnfsSnoopPortPurgeInterval | read-write | deprecated | This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received, this timer runs for 'PortPur… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.7 | ColumnfsSnoopReportForwardInterval | read-write | current | This timer is used when both proxy and proxy-reporting is disabled. The switch then has to suppress multiple IGMPv2/ MLDv1 report messages for the same group f… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.8 | ColumnfsSnoopRetryCount | read-write | current | In proxy/proxy-reporting mode, when the switch receives leave message on a port, it sends group specific query to check if there are any other interested v2 re… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.9 | ColumnfsSnoopGrpQueryInterval | read-write | current | The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there are any intersted receiv… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.10 | ColumnfsSnoopReportFwdOnAllPorts | read-write | current | In snooping mode, Snooping module will forward reports only on router ports by default. This object provides administrative control either to forward the repor… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.11 | ColumnfsSnoopTraceOption | read-write | current | This object is used to enable trace statements in snooping module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer … |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.12 | ColumnfsSnoopOperStatus | read-only | current | The operational status of the IGS/MLDS protocol. The value enabled(1) indicates the IGS/MLDS module is currently enabled in the system. The value disable(1) in… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.13 | ColumnfsSnoopSendQueryOnTopoChange | read-write | current | The Snooping Switch can be configured to send IGMP/MLD General queries on all non router ports when spanning tree topology change occurs in a network. If the s… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.14 | ColumnfsSnoopSendLeaveOnTopoChange | read-write | current | The Snooping Switch can be configured to issue an IGMP proxy query solicitation on network ports, i.e. an IGMP Group Leave with group address 0.0.0.0. This wil… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.15 | ColumnfsSnoopFilterStatus | read-write | current | This object is used to enable/disable the IGS filtering feature. Interface mapping configurations will not be affected by this object status. When this object … |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.16 | ColumnfsSnoopMulticastVlanStatus | read-write | current | This object is used to enable/disable the Multicast VLAN feature. When Multicast VLAN feature is enabled, each incoming untagged report or leave message will b… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.17 | ColumnfsSnoopProxyStatus | read-write | current | This object enables or disables Proxy in the system. Proxy can be enabled only if Proxy-reporting is disabled. In proxy mode, the switch act as querier for all… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.18 | ColumnfsSnoopQueryFwdOnAllPorts | read-write | current | In proxy and proxy reporting mode, Snooping module will send query messages only to the non-router ports by default. This object provides administrative contro… |
| 1.3.6.1.4.1.10876.101.1.105.2.2.1.19 | ColumnfsSnoopFwdGroupsCnt | read-only | current | Provide Forwarding DataBase Group Count for Particular instance and Address Type. |
| 1.3.6.1.4.1.10876.101.1.105.3 | NodefsSnoopVlan | |||
| 1.3.6.1.4.1.10876.101.1.105.3.1 | TablefsSnoopVlanMcastMacFwdTable | not-accessible | current | This table contains MAC based multicast forwarding information. This information is applicable only if the 'fsSnoopMcastForwardingMode' is set to 'macbased' |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1 | RowfsSnoopVlanMcastMacFwdEntry | not-accessible | current | This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded. |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1.1 | ColumnfsSnoopVlanMcastMacFwdInstId | not-accessible | current | Instance ID pertaining to the Multicast forwarding entry. |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1.2 | ColumnfsSnoopVlanMcastMacFwdVlanId | not-accessible | current | VLAN ID pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1.3 | ColumnfsSnoopVlanMcastMacFwdInetAddressType | not-accessible | current | InetAddressType pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1.4 | ColumnfsSnoopVlanMcastMacFwdGroupAddress | not-accessible | current | Multicast group MAC address. |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1.5 | ColumnfsSnoopVlanMcastMacFwdPortList | read-only | current | List of ports onto which the multicast data packets destined for this group will be forwarded. |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1.6 | ColumnfsSnoopVlanMcastMacFwdLocalPortList | read-only | current | List of ports onto which the multicast data packets destined for this group will be forwarded. Each bit in this object represent interfaces denoted by the obje… |
| 1.3.6.1.4.1.10876.101.1.105.3.1.1.7 | ColumnfsSnoopVlanMcastMacFwdEntryFlag | read-only | current | This flag tell about the entry type: either it is a Static group entry or it is a Dynamic group entry |
| 1.3.6.1.4.1.10876.101.1.105.3.2 | TablefsSnoopVlanMcastIpFwdTable | not-accessible | deprecated | This table contains IP based multicast forwarding information. This information is applicable only if the 'fsSnoopInstMcastForwardingMode' is set to 'ip-based'… |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1 | RowfsSnoopVlanMcastIpFwdEntry | not-accessible | deprecated | This table contains VLAN ID, unicast source address , multicast group address and the list of ports onto which the multicast data packets for group should be f… |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1.1 | ColumnfsSnoopVlanMcastIpFwdInstId | not-accessible | deprecated | Instance ID pertaining to the Multicast forwarding entry. |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1.2 | ColumnfsSnoopVlanMcastIpFwdVlanId | not-accessible | deprecated | VLAN ID pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1.3 | ColumnfsSnoopVlanMcastIpFwdAddressType | not-accessible | deprecated | InetAddressType pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1.4 | ColumnfsSnoopVlanMcastIpFwdSourceAddress | not-accessible | deprecated | Unicast source address of the data source that sends multicast data for this group |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1.5 | ColumnfsSnoopVlanMcastIpFwdGroupAddress | not-accessible | deprecated | IP/IPv6 multicast group address |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1.6 | ColumnfsSnoopVlanMcastIpFwdPortList | read-only | deprecated | List of ports onto which the multicast data packets destined for this source and group will be forwarded. |
| 1.3.6.1.4.1.10876.101.1.105.3.2.1.7 | ColumnfsSnoopVlanMcastIpFwdEntryFlag | read-only | current | This flag tell about the entry type: either it is a Static group entry or it is a Dynamic group entry |
| 1.3.6.1.4.1.10876.101.1.105.3.3 | TablefsSnoopVlanRouterTable | not-accessible | current | This table contains the list of ports through which a router, in a particular VLAN is reachable. |
| 1.3.6.1.4.1.10876.101.1.105.3.3.1 | RowfsSnoopVlanRouterEntry | not-accessible | current | Contains the VLAN ID and list of ports on which routers are present in the VLAN. |
| 1.3.6.1.4.1.10876.101.1.105.3.3.1.1 | ColumnfsSnoopVlanRouterInstId | not-accessible | current | Instance ID pertaining to the router port entry. |
| 1.3.6.1.4.1.10876.101.1.105.3.3.1.2 | ColumnfsSnoopVlanRouterVlanId | not-accessible | current | VLAN ID of the ports through which router is reachable. |
| 1.3.6.1.4.1.10876.101.1.105.3.3.1.3 | ColumnfsSnoopVlanRouterInetAddressType | not-accessible | current | It indicates whether the row belongs to IGMP / MLD snooping. |
| 1.3.6.1.4.1.10876.101.1.105.3.3.1.4 | ColumnfsSnoopVlanRouterPortList | read-only | current | List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically… |
| 1.3.6.1.4.1.10876.101.1.105.3.3.1.5 | ColumnfsSnoopVlanRouterLocalPortList | read-only | current | List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically… |
| 1.3.6.1.4.1.10876.101.1.105.3.4 | TablefsSnoopVlanFilterTable | not-accessible | current | This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system. |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1 | RowfsSnoopVlanFilterEntry | not-accessible | current | Contains snooping status , version and fast leave configuration for a specific VLAN. |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.1 | ColumnfsSnoopVlanFilterInstId | not-accessible | current | Instance ID pertaining to VLAN filter table entry. |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.2 | ColumnfsSnoopVlanFilterVlanId | not-accessible | current | VLAN ID for which snooping configuration is to be done. |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.3 | ColumnfsSnoopVlanFilterInetAddressType | not-accessible | current | Indicates whether the row belongs to IGS/MLD snooping |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.4 | ColumnfsSnoopVlanSnoopStatus | read-write | current | Enables or disables IGS/MLDS on that specific VLAN |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.5 | ColumnfsSnoopVlanOperatingVersion | read-only | deprecated | Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD v… |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.6 | ColumnfsSnoopVlanCfgOperVersion | read-write | deprecated | Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD v… |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.7 | ColumnfsSnoopVlanFastLeave | read-write | current | Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message the switch checks if they are any interested receivers for t… |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.8 | ColumnfsSnoopVlanQuerier | read-only | current | Indicates whether the switch is configured as a querier in the VLAN |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.9 | ColumnfsSnoopVlanCfgQuerier | read-write | current | The snooping switch can be configured to send IGMP/MLD queries when IGMP/MLD routers are not present in the VLAN. When set to 'enabled' the switch will generat… |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.10 | ColumnfsSnoopVlanQueryInterval | read-write | current | This is the interval (in seconds) for which the switch sends general queries in proxy and proxy-reporting mode. In proxy-reporting mode, General queries will b… |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.11 | ColumnfsSnoopVlanRtrPortList | read-write | current | List of ports which are configured statically as router ports. statically. This object may not be sufficient to represent the full set of interfaces in each sw… |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.12 | ColumnfsSnoopVlanRowStatus | read-write | current | The status of a row in the VLAN filter table. Using this object, new entries can be created in the VLAN filter table and the existing entries can be removed fr… |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.13 | ColumnfsSnoopVlanStartupQueryCount | read-write | current | The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. The default value is the Robustness. |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.14 | ColumnfsSnoopVlanStartupQueryInterval | read-write | current | Interval between the general query messages sent by the switch during startup of querier election process. This value must be <= (Query Interval/4) |
| 1.3.6.1.4.1.10876.101.1.105.3.4.1.15 | ColumnfsSnoopVlanOtherQuerierPresentInterval | read-write | current | The Other Querier Present Interval is the length of time that must pass before a multicast router decides that there is no longer another multicast router whic… |
| 1.3.6.1.4.1.10876.101.1.105.3.5 | TablefsSnoopVlanMcastGroupTable | not-accessible | current | This table contains the information about dynamically learnt multicast groups and the ports on which they are learnt. When enhanced mode is enabled this table … |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1 | RowfsSnoopVlanMcastGroupEntry | not-accessible | current | Contains the information learnt about a multicast group. |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1.1 | ColumnfsSnoopVlanMcastGroupInstanceId | not-accessible | current | Instance Id pertaining to a particular virtual context. |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1.2 | ColumnfsSnoopVlanMcastGroupOuterVlanId | not-accessible | current | The outer vlan id on which the multicast group is learnt. |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1.3 | ColumnfsSnoopVlanMcastGroupInetAddressType | not-accessible | current | Inet Address Type corresponding to this group entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1.4 | ColumnfsSnoopVlanMcastGroupAddress | not-accessible | current | The Multicast group address learnt. |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1.5 | ColumnfsSnoopVlanMcastGroupInnerVlanId | not-accessible | current | The inner vlan id on which the multicast group is learnt. |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1.6 | ColumnfsSnoopVlanMcastGroupPortList | read-only | current | The list of interfaces on which the group entry is learnt. statically. This object may not be sufficient to represent the full set of interfaces in each switch… |
| 1.3.6.1.4.1.10876.101.1.105.3.5.1.7 | ColumnfsSnoopVlanMcastGroupLocalPortList | read-only | current | The list of interfaces on which the group entry is learnt. Each bit in this object represent interfaces denoted by the object fsVcHlPortId associated to the in… |
| 1.3.6.1.4.1.10876.101.1.105.3.6 | TablefsSnoopVlanMcastReceiverTable | not-accessible | current | This table contains the information about dynamically learnt multicast groups, the source ip of the hosts sending the multicast reports and the registered sour… |
| 1.3.6.1.4.1.10876.101.1.105.3.6.1 | RowfsSnoopVlanMcastReceiverEntry | not-accessible | current | Contains an entry for each multicast report sent by each host for a multicast group and requesting data from a specific source. |
| 1.3.6.1.4.1.10876.101.1.105.3.6.1.1 | ColumnfsSnoopVlanMcastReceiverPortIndex | not-accessible | current | The interface on which the multicast group address is learnt. |
| 1.3.6.1.4.1.10876.101.1.105.3.6.1.2 | ColumnfsSnoopVlanMcastReceiverHostAddress | not-accessible | current | The IP address of the multicast receiver that has sent the multicast report to join this group. |
| 1.3.6.1.4.1.10876.101.1.105.3.6.1.3 | ColumnfsSnoopVlanMcastReceiverSourceAddress | not-accessible | current | Unicast source address of the data source that sends multicast data for this group |
| 1.3.6.1.4.1.10876.101.1.105.3.6.1.4 | ColumnfsSnoopVlanMcastReceiverFilterMode | read-only | current | The include or the exclude mode that has been registered by the multicast receiver for the unicast source address specified. |
| 1.3.6.1.4.1.10876.101.1.105.3.7 | TablefsSnoopVlanIpFwdTable | not-accessible | current | This table contains IP multicast forwarding information based on both Outer VLAN and Inner VLAN. When enhanced mode is enabled this table will be populated wit… |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1 | RowfsSnoopVlanIpFwdEntry | not-accessible | current | This table contains Outer VLAN ID, unicast source address, multicast group address, Inner VLAN ID and the list of ports onto which the multicast data packets f… |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.1 | ColumnfsSnoopVlanIpFwdInstanceId | not-accessible | current | Instance Id pertaining to a particular virtual context. |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.2 | ColumnfsSnoopVlanIpFwdOuterVlanId | not-accessible | current | The outer vlan id on which the multicast group is learnt. |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.3 | ColumnfsSnoopVlanIpFwdInetAddressType | not-accessible | current | Inet Address Type corresponding to this forwarding table entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.4 | ColumnfsSnoopVlanIpFwdSourceAddress | not-accessible | current | Unicast source address of the data source that sends multicast data for this group |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.5 | ColumnfsSnoopVlanIpFwdGroupAddress | not-accessible | current | The Multicast group address learnt. |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.6 | ColumnfsSnoopVlanIpFwdInnerVlanId | not-accessible | current | The inner vlan id on which the multicast group is learnt. |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.7 | ColumnfsSnoopVlanIpFwdPortList | read-only | current | List of ports onto which the multicast data packets from this source, destined for this group, will be forwarded statically. This object may not be sufficient … |
| 1.3.6.1.4.1.10876.101.1.105.3.7.1.8 | ColumnfsSnoopVlanIpFwdLocalPortList | read-only | current | List of ports onto which the multicast data packets from this source destined for this group, will be forwarded. Each bit in this object represent interfaces d… |
| 1.3.6.1.4.1.10876.101.1.105.3.8 | TablefsSnoopVlanFilterXTable | not-accessible | current | This table is an extention table of fsSnoopVlanFilterTable |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1 | RowfsSnoopVlanFilterXEntry | not-accessible | current | Each entry contains configurations for specific VLANs |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.1 | ColumnfsSnoopVlanBlkRtrPortList | read-write | current | List of ports which are configured statically as blocked router ports statically. This object may not be sufficient to represent full set of interfaces in each… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.2 | ColumnfsSnoopVlanFilterMaxLimitType | read-write | current | Indicates the type of limit to be applied on this VLAN. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.3 | ColumnfsSnoopVlanFilterMaxLimit | read-write | current | Sets the maximum number of unique entries (channel or group) that can be learned simultaneously on this VLAN. The fsSnoopVlanFilterMaxLimitType must be set bef… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.4 | ColumnfsSnoopVlanFilter8021pPriority | read-write | current | Configures the priority with which the reports assigned to this VLAN should be processed by the hardware as well as by the upstream router. Priority 0 means lo… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.5 | ColumnfsSnoopVlanFilterDropReports | read-write | current | Some implementations might require that IGMPv1 should not be supported, as IGMPv1 does not have any group leaving mechanism. Some other implementations might r… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.6 | ColumnfsSnoopVlanMulticastProfileId | read-write | current | This object contains the multicast profile id configured for a particular VLAN and is used for multicast vlan classification. When any untagged report or leave… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.7 | ColumnfsSnoopVlanPortPurgeInterval | read-only | current | This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received,this timer runs for 'PortPurg… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.8 | ColumnfsSnoopVlanMaxResponseTime | read-create | current | The maximum response code advertised in queries send over this vlan.This object is used to configure max response code for both IGS and MLDS.Minimum value for … |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.9 | ColumnfsSnoopVlanRtrLocalPortList | read-write | current | List of ports which are configured statically as router ports. Each bit in this object represent interfaces denoted by the object fsVcHlPortId associated to th… |
| 1.3.6.1.4.1.10876.101.1.105.3.8.1.10 | ColumnfsSnoopVlanBlkRtrLocalPortList | read-write | current | List of ports which are configured statically as blocked router ports. Each bit in this object represent interfaces denoted by the object fsVcHlPortId associat… |
| 1.3.6.1.4.1.10876.101.1.105.3.9 | TablefsSnoopVlanStaticMcastGrpTable | not-accessible | current | This table contains IP based multicast forwarding information. |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1 | RowfsSnoopVlanStaticMcastGrpEntry | not-accessible | current | This table contains VLAN ID, unicast source address , multicast group address and the list of ports onto which the multicast data packets for group should be f… |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1.1 | ColumnfsSnoopVlanStaticMcastGrpInstId | not-accessible | current | Instance ID pertaining to the Multicast forwarding entry. Currently only one instance is supported so it is always 1 |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1.2 | ColumnfsSnoopVlanStaticMcastGrpVlanId | not-accessible | current | VLAN ID pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1.3 | ColumnfsSnoopVlanStaticMcastGrpAddressType | not-accessible | current | InetAddressType pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1.4 | ColumnfsSnoopVlanStaticMcastGrpSourceAddress | not-accessible | current | Unicast source address of the data source that sends multicast data for this group |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1.5 | ColumnfsSnoopVlanStaticMcastGrpGroupAddress | not-accessible | current | IP/IPv6 multicast group address |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1.6 | ColumnfsSnoopVlanStaticMcastGrpPortList | read-write | current | List of ports onto which the multicast data packets destined for this source and group will be forwarded. |
| 1.3.6.1.4.1.10876.101.1.105.3.9.1.7 | ColumnfsSnoopVlanStaticMcastGrpRowStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.10876.101.1.105.4 | NodefsSnoopStats | |||
| 1.3.6.1.4.1.10876.101.1.105.4.1 | TablefsSnoopStatsTable | not-accessible | current | This table contains snooping statistics maintained by the switch. The statistics are maintained on a per VLAN basis. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1 | RowfsSnoopStatsEntry | not-accessible | current | Contains snooping statistics for a particular VLAN. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.1 | ColumnfsSnoopStatsInstId | not-accessible | current | Instance ID pertaining for the statistics entry. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.2 | ColumnfsSnoopStatsVlanId | not-accessible | current | VLAN ID for which snooping statistics are displayed |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.3 | ColumnfsSnoopStatsInetAddressType | not-accessible | current | Indicates whether the statistics are for IGS/MLDS |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.4 | ColumnfsSnoopStatsRxGenQueries | read-only | current | Provides the statistics of General Queries received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.5 | ColumnfsSnoopStatsRxGrpQueries | read-only | current | Provides the statistics of Group Specific Queries received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.6 | ColumnfsSnoopStatsRxGrpAndSrcQueries | read-only | current | Provides the statistics of Group and Source Specific Queries received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.7 | ColumnfsSnoopStatsRxAsmReports | read-only | current | Provides the statistics of IGMPv1/IGMPv2 Membership reports received by the snooping switch. In case of MLDS, it provides the statistics of MLDv1 membership re… |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.8 | ColumnfsSnoopStatsRxSsmReports | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.9 | ColumnfsSnoopStatsRxSsmIsInMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type IS_IN received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.10 | ColumnfsSnoopStatsRxSsmIsExMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type IS_EX received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.11 | ColumnfsSnoopStatsRxSsmToInMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type TO_IN received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.12 | ColumnfsSnoopStatsRxSsmToExMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type TO_EX received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.13 | ColumnfsSnoopStatsRxSsmAllowMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type ALLOW received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.14 | ColumnfsSnoopStatsRxSsmBlockMsgs | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports of type BLOCK received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.15 | ColumnfsSnoopStatsRxAsmLeaves | read-only | current | Provides the statistics of IGMPv2/MLDv1 Leave messages received by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.16 | ColumnfsSnoopStatsTxGenQueries | read-only | current | Provides the statistics of General Queries transmitted by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.17 | ColumnfsSnoopStatsTxGrpQueries | read-only | current | Provides the statistics of Group Specific Queries transmitted by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.18 | ColumnfsSnoopStatsTxGrpAndSrcQueries | read-only | current | Provides the statistics of Group and Source Specific Queries transmitted by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.19 | ColumnfsSnoopStatsTxAsmReports | read-only | current | Provides the statistics of IGMPv1/IGMPv2 Membership reports transmitted by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.20 | ColumnfsSnoopStatsTxSsmReports | read-only | current | Provides the statistics of IGMPv3/MLDv2 Membership reports transmitted by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.21 | ColumnfsSnoopStatsTxAsmLeaves | read-only | current | Provides the statistics of IGMPv2/MLDv1 Leave messages transmitted by the snooping switch. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.22 | ColumnfsSnoopStatsDroppedPkts | read-only | current | Provides the number of erroneous IGMP/MLD packets dropped by the snooping switch due to failure in checksum calculation. |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.23 | ColumnfsSnoopStatsUnsuccessfulJoins | read-only | current | Provides the total number of IGMP groups or channels dropped, because the maximum limit of groups or channels allowed for the VLAN has been reached. By default… |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.24 | ColumnfsSnoopStatsActiveJoins | read-only | current | Provides the total number of IGMP groups or channels active on this VLAN at the given time. By default, this object is for groups, but if fsSnoopVlanFilterMaxL… |
| 1.3.6.1.4.1.10876.101.1.105.4.1.1.25 | ColumnfsSnoopStatsActiveGroups | read-only | current | Provides the total number of IGMP groups or channels active on this VLAN at the given time. |
| 1.3.6.1.4.1.10876.101.1.105.5 | NodefsSnoopPort | |||
| 1.3.6.1.4.1.10876.101.1.105.5.1 | TablefsSnoopPortTable | not-accessible | current | This table contains Port-related configurable information. This table is applicable only when the snooping module is operating in the default Mode. This table … |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1 | RowfsSnoopPortEntry | not-accessible | current | This table contains the list of paramter/attribute objects that can be configured on a port. |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.1 | ColumnfsSnoopPortIndex | not-accessible | current | The interface index of the port. |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.2 | ColumnfsSnoopPortInetAddressType | not-accessible | current | Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.3 | ColumnfsSnoopPortLeaveMode | read-write | current | Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave me… |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.4 | ColumnfsSnoopPortRateLimit | read-write | current | Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value sup… |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.5 | ColumnfsSnoopPortMaxLimitType | read-write | current | Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations wh… |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.6 | ColumnfsSnoopPortMaxLimit | read-write | current | Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The fsSnoopPortMaxLimitType must be se… |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.7 | ColumnfsSnoopPortProfileId | read-write | current | The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGM… |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.8 | ColumnfsSnoopPortMemberCnt | read-only | current | Provides the total number of groups or channels active on the interface at the given time. |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.9 | ColumnfsSnoopPortMaxBandwidthLimit | read-write | current | Sets the Maximum bandwidth allowed on this port for Multicast. The fsSnoopPortMaxLimitType must be set before configuring this object. If the fsSnoopPortMaxLim… |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.10 | ColumnfsSnoopPortDropReports | read-write | current | This object decides whether to process or drop the IGMP reports coming on this port. |
| 1.3.6.1.4.1.10876.101.1.105.5.1.1.11 | ColumnfsSnoopPortRowStatus | read-create | current | The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table. |
| 1.3.6.1.4.1.10876.101.1.105.5.2 | TablefsSnoopEnhPortTable | not-accessible | current | This table contains Port-related configurable information. This table is applicable only when the snooping module is operating in the enhanced Mode. This table… |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1 | RowfsSnoopEnhPortEntry | not-accessible | current | This table contains the list of paramter/attribute objects that can be configured on an interface. |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.1 | ColumnfsSnoopEnhPortIndex | not-accessible | current | The interface index of the port. |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.2 | ColumnfsSnoopEnhPortInnerVlanId | not-accessible | current | The Inner VLAN Identifier. |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.3 | ColumnfsSnoopEnhPortInetAddressType | not-accessible | current | Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.4 | ColumnfsSnoopEnhPortLeaveMode | read-write | current | Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave me… |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.5 | ColumnfsSnoopEnhPortRateLimit | read-write | current | Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value sup… |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.6 | ColumnfsSnoopEnhPortMaxLimitType | read-write | current | Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations wh… |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.7 | ColumnfsSnoopEnhPortMaxLimit | read-write | current | Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The fsSnoopEnhPortMaxLimitType must be… |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.8 | ColumnfsSnoopEnhPortProfileId | read-write | current | The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGM… |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.9 | ColumnfsSnoopEnhPortMemberCnt | read-only | current | Provides the total number of groups or channels active on the interface at the given time. |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.10 | ColumnfsSnoopEnhPortMaxBandwidthLimit | read-write | current | Sets the Maximum bandwidth allowed on this port for Multicast. The fsSnoopEnhPortMaxLimitType must be set before configuring this object. If the fsSnoopEnhPort… |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.11 | ColumnfsSnoopEnhPortDropReports | read-write | current | This object decides whether to process or drop the IGMP reports coming on this port. |
| 1.3.6.1.4.1.10876.101.1.105.5.2.1.12 | ColumnfsSnoopEnhPortRowStatus | read-create | current | The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table. |
| 1.3.6.1.4.1.10876.101.1.105.5.3 | TablefsSnoopRtrPortTable | not-accessible | current | This table contains upstream Router Port-related configurable information. Router port entry in this table will be created when the router port is either learn… |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1 | RowfsSnoopRtrPortEntry | not-accessible | current | This table contains the upstream router port operating and configured version of IGMP. |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1.1 | ColumnfsSnoopRtrPortIndex | not-accessible | current | The interface index of the port which is defined as an upstream router port. |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1.2 | ColumnfsSnoopRtrPortVlanId | not-accessible | current | The VLAN Identifier for the upstream router port |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1.3 | ColumnfsSnoopRtrPortInetAddressType | not-accessible | current | Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1.4 | ColumnfsSnoopRtrPortOperVersion | read-only | current | Indicates the operating version of the IGMP Proxy on the upstream router port. Operating version is used by the Proxy to send consolidated reports on the route… |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1.5 | ColumnfsSnoopRtrPortCfgOperVersion | read-write | current | Indicates the configured version of the IGMP Proxy on the upstream router port.The default operating mode is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2… |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1.6 | ColumnfsSnoopOlderQuerierInterval | read-write | current | The time interval after which proxy assumes that there are no v1/v2 routers present on the upstream port.While OlderQuerierTimer is running, proxy will reply t… |
| 1.3.6.1.4.1.10876.101.1.105.5.3.1.7 | ColumnfsSnoopV3QuerierInterval | read-only | current | The time interval after which proxy assumes that there are no IGMPv3 routers present on the upstream port.While V3QuerierTimer is running, proxy will reply to … |
| 1.3.6.1.4.1.10876.101.1.105.5.4 | TablefsXSnoopRtrPortTable | not-accessible | current | This augment table contains additional objects for fsSnoopRtrPortTable. |
| 1.3.6.1.4.1.10876.101.1.105.5.4.1 | RowfsXSnoopRtrPortEntry | not-accessible | current | This table contains management information applicable to an interface. |
| 1.3.6.1.4.1.10876.101.1.105.5.4.1.1 | ColumnfsXSnoopRtrPortRowStatus | read-write | current | The Row status of this entry which is used only in two scenarios. 1. CREATE_AND_WAIT 2. DESTROY. Where '1' will be used during port creation and '2' will be us… |
| 1.3.6.1.4.1.10876.101.1.105.6 | NodefsSnoopTrapObjects | |||
| 1.3.6.1.4.1.10876.101.1.105.6.5 | TablefsSnoopTrapObjectsTable | not-accessible | current | This table is used to notify the error occurred, when an NPAPI call invoked from the Snooping module fails, in the form of a trap |
| 1.3.6.1.4.1.10876.101.1.105.6.5.1 | RowfsSnoopTrapObjectsEntry | not-accessible | current | This entry is used to store the notification information |
| 1.3.6.1.4.1.10876.101.1.105.6.5.1.1 | ColumnfsSnoopTrapHwErrType | read-only | current | Indicates the type of hardware call that failed. |
| 1.3.6.1.4.1.10876.101.1.105.7 | NodefsSnoopNotifications | |||
| 1.3.6.1.4.1.10876.101.1.105.7.0 | NodefsSnoopTraps | |||
| 1.3.6.1.4.1.10876.101.1.105.7.0.1 | NotificationfsSnoopHwFailureTrap | current | Generated when an NPAPI call invoked from the snooping module fails |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InnerVlanIndex | Unsigned32 (0..4094) | current | A value used to represent the Inner VLAN that might be carried in a packet. A value between 1 and 4094 inclusive, represents a valid vlan and is used only in cases where the switch understands and is capable of handling… |