SW-ACLMGMT-MIB
100 objects
The Structure of Access Control List Information for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-mgmt |
| Q-BRIDGE-MIB | PortList |
| RFC1213-MIB | DisplayString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.5 | IdentityswAclMgmtMIB | The Structure of Access Control List Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.11.5.1 | NodeswAclMaskMgmt | |||
| 1.3.6.1.4.1.171.11.5.1.1 | TableswACLEthernetTable | not-accessible | current | This table contain ACL mask of Ethernet information. Access profiles will be created on the switch by row creation and to define which parts of each incoming f… |
| 1.3.6.1.4.1.171.11.5.1.1.1 | RowswACLEthernetEntry | not-accessible | current | A list of information about ACL of Ethernet. |
| 1.3.6.1.4.1.171.11.5.1.1.1.1 | ColumnswACLEthernetProfileID | read-only | current | The ID of ACL mask entry ,and is unique in the mask list. |
| 1.3.6.1.4.1.171.11.5.1.1.1.2 | ColumnswACLEthernetUsevlan | read-create | current | Specifies that the switch will examine the VLAN part of each packet header. |
| 1.3.6.1.4.1.171.11.5.1.1.1.3 | ColumnswACLEthernetMacAddrMaskState | read-create | current | This object indicates the status of MAC address mask. other(1) - Neither source MAC address nor destination MAC address are masked. dst-mac-addr(2) - recieved … |
| 1.3.6.1.4.1.171.11.5.1.1.1.4 | ColumnswACLEthernetSrcMacAddrMask | read-create | current | This object Specifies the MAC address mask for the source MAC address. |
| 1.3.6.1.4.1.171.11.5.1.1.1.5 | ColumnswACLEthernetDstMacAddrMask | read-create | current | This object Specifies the MAC address mask for the destination MAC address. |
| 1.3.6.1.4.1.171.11.5.1.1.1.6 | ColumnswACLEthernetUse8021p | read-create | current | Specifies if the switch will examine the 802.1p priority value in the frame's header or not. |
| 1.3.6.1.4.1.171.11.5.1.1.1.7 | ColumnswACLEthernetUseEthernetType | read-create | current | Specifies if the switch will examine the Ethernet type value in each frame's header or not. |
| 1.3.6.1.4.1.171.11.5.1.1.1.8 | ColumnswACLEthernetPort | read-create | current | This object indicates the portlist of this entry. |
| 1.3.6.1.4.1.171.11.5.1.1.1.9 | ColumnswACLEthernetRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.5.1.2 | TableswACLIpTable | not-accessible | current | This table contain ACL mask of IP information. Access profiles will be created on the switch by row creation and to define which parts of each incoming frame's… |
| 1.3.6.1.4.1.171.11.5.1.2.1 | RowswACLIpEntry | not-accessible | current | A list of information about ACL of IP Layer. |
| 1.3.6.1.4.1.171.11.5.1.2.1.1 | ColumnswACLIpProfileID | read-only | current | The ID of ACL mask entry ,and is unique in the mask list. |
| 1.3.6.1.4.1.171.11.5.1.2.1.2 | ColumnswACLIpUsevlan | read-create | current | This object indicates if IP layer vlan is examined or not. |
| 1.3.6.1.4.1.171.11.5.1.2.1.3 | ColumnswACLIpIpAddrMaskState | read-create | current | This object indicates the status of IP address mask. other(1) - Neither source IP address nor destination IP address are masked. dst-ip-addr(2) - recieved fram… |
| 1.3.6.1.4.1.171.11.5.1.2.1.4 | ColumnswACLIpSrcIpAddrMask | read-create | current | This object Specifies IP address mask for the source IP address. |
| 1.3.6.1.4.1.171.11.5.1.2.1.5 | ColumnswACLIpDstIpAddrMask | read-create | current | This object Specifies the IP address mask for the destination IP address. |
| 1.3.6.1.4.1.171.11.5.1.2.1.6 | ColumnswACLIpUseDSCP | read-create | current | This object indicates DSCP protocol is is examined or not. |
| 1.3.6.1.4.1.171.11.5.1.2.1.7 | ColumnswACLIpUseProtoType | read-create | current | That object indicates which protocol will be examined. |
| 1.3.6.1.4.1.171.11.5.1.2.1.8 | ColumnswACLIpIcmpOption | read-create | current | This object indicates which fields should be filled in of ICMP. none(1)- two fields are null. type(2)- type field should be filled in. code(3)- code field shou… |
| 1.3.6.1.4.1.171.11.5.1.2.1.9 | ColumnswACLIpIgmpOption | read-create | current | This object indicates Options of IGMP is examined or not. |
| 1.3.6.1.4.1.171.11.5.1.2.1.10 | ColumnswACLIpTcpOption | read-create | current | This object indicates the status of filtered address of TCP. other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's de… |
| 1.3.6.1.4.1.171.11.5.1.2.1.11 | ColumnswACLIpUdpOption | read-create | current | This object indicates the status of filtered address of UDP . other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's d… |
| 1.3.6.1.4.1.171.11.5.1.2.1.12 | ColumnswACLIpTCPorUDPSrcPortMask | read-create | current | Specifies a TCP port mask for the source port if swACLIpUseProtoType is TCP Specifies a UDP port mask for the source port if swACLIpUseProtoType is UDP. |
| 1.3.6.1.4.1.171.11.5.1.2.1.13 | ColumnswACLIpTCPorUDPDstPortMask | read-create | current | Specifies a TCP port mask for the destination port if swACLIpUseProtoType is TCP Specifies a UDP port mask for the destination port if swACLIpUseProtoType is U… |
| 1.3.6.1.4.1.171.11.5.1.2.1.14 | ColumnswACLIpTCPFlagBit | read-create | current | Specifies a TCP connection flag mask. |
| 1.3.6.1.4.1.171.11.5.1.2.1.16 | ColumnswACLIpProtoIDOption | read-create | current | Specifies that the switch will examine each frame's Protocol ID field or not. |
| 1.3.6.1.4.1.171.11.5.1.2.1.17 | ColumnswACLIpProtoIDMask | read-create | current | Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header. |
| 1.3.6.1.4.1.171.11.5.1.2.1.18 | ColumnswACLIpPort | read-create | current | This object indicates the portlist of this entry. |
| 1.3.6.1.4.1.171.11.5.1.2.1.19 | ColumnswACLIpRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.5.1.2.1.115 | ColumnswACLIpTCPFlagBitMask | read-create | current | A value which indicates the set of TCP flags that this entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for ea… |
| 1.3.6.1.4.1.171.11.5.1.3 | TableswACLPayloadTable | not-accessible | current | This table contain ACL mask of payload information. |
| 1.3.6.1.4.1.171.11.5.1.3.1 | RowswACLPayloadEntry | not-accessible | current | This Entry contain ACL mask of payload information. |
| 1.3.6.1.4.1.171.11.5.1.3.1.1 | ColumnswACLPayloadProfileID | read-only | current | The ID of ACL mask entry ,and is unique in the mask list. |
| 1.3.6.1.4.1.171.11.5.1.3.1.2 | ColumnswACLPayloadPort | read-create | current | The portlist of ACL mask entry . |
| 1.3.6.1.4.1.171.11.5.1.3.1.3 | ColumnswACLPayloadOffSet0to15 | read-create | current | The offset of ACL mask entry . |
| 1.3.6.1.4.1.171.11.5.1.3.1.4 | ColumnswACLPayloadOffSet16to31 | read-create | current | The offset of ACL mask entry . |
| 1.3.6.1.4.1.171.11.5.1.3.1.5 | ColumnswACLPayloadOffSet32to47 | read-create | current | The offset of ACL mask entry . |
| 1.3.6.1.4.1.171.11.5.1.3.1.6 | ColumnswACLPayloadOffSet48to63 | read-create | current | The offset of ACL mask entry . |
| 1.3.6.1.4.1.171.11.5.1.3.1.7 | ColumnswACLPayloadOffSet64to79 | read-create | current | The offset of ACL mask entry . |
| 1.3.6.1.4.1.171.11.5.1.3.1.8 | ColumnswACLPayloadRowStatus | read-create | current | The status of the entry . |
| 1.3.6.1.4.1.171.11.5.2 | NodeswAclRuleMgmt | |||
| 1.3.6.1.4.1.171.11.5.2.1 | TableswACLEtherRuleTable | not-accessible | current | This table contain ACL rule of ethernet information. |
| 1.3.6.1.4.1.171.11.5.2.1.1 | RowswACLEtherRuleEntry | not-accessible | current | A list of information about ACL rule of the layer 2 part of each packet. |
| 1.3.6.1.4.1.171.11.5.2.1.1.1 | ColumnswACLEtherRuleProfileID | read-only | current | The ID of ACL mask entry ,and is unique in the mask list. |
| 1.3.6.1.4.1.171.11.5.2.1.1.2 | ColumnswACLEtherRuleAccessID | read-only | current | The ID of ACL rule entry relate to swACLEtherRuleProfileID. |
| 1.3.6.1.4.1.171.11.5.2.1.1.3 | ColumnswACLEtherRuleVlan | read-create | current | Specifies that the access will apply to only to this VLAN. |
| 1.3.6.1.4.1.171.11.5.2.1.1.4 | ColumnswACLEtherRuleSrcMacAddress | read-create | current | Specifies that the access will apply to only packets with this source MAC address. |
| 1.3.6.1.4.1.171.11.5.2.1.1.5 | ColumnswACLEtherRuleDstMacAddress | read-create | current | Specifies that the access will apply to only packets with this destination MAC address. |
| 1.3.6.1.4.1.171.11.5.2.1.1.6 | ColumnswACLEtherRule8021P | read-create | current | Specifies that the access will apply only to packets with this 802.1p priority value. |
| 1.3.6.1.4.1.171.11.5.2.1.1.7 | ColumnswACLEtherRuleEtherType | read-create | current | Specifies that the access will apply only to packets with this hexidecimal 802.1Q Ethernet type value in the packet header. |
| 1.3.6.1.4.1.171.11.5.2.1.1.8 | ColumnswACLEtherRuleEnablePriority | read-create | current | Specifies that the access will apply only to packets with priority value. |
| 1.3.6.1.4.1.171.11.5.2.1.1.9 | ColumnswACLEtherRulePriority | read-create | current | Specific the priority will change to the packets while the swACLEtherRuleReplacePriority is enabled . |
| 1.3.6.1.4.1.171.11.5.2.1.1.10 | ColumnswACLEtherRuleReplacePriority | read-create | current | Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not . |
| 1.3.6.1.4.1.171.11.5.2.1.1.11 | ColumnswACLEtherRuleEnableReplaceDscp | read-create | current | Specific the packets that match the access profile will replaced the DSCP field by the switch or not . |
| 1.3.6.1.4.1.171.11.5.2.1.1.12 | ColumnswACLEtherRuleRepDscp | read-create | current | specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-… |
| 1.3.6.1.4.1.171.11.5.2.1.1.14 | ColumnswACLEtherRulePermit | read-create | current | This object indicates the permit status of this entry. |
| 1.3.6.1.4.1.171.11.5.2.1.1.15 | ColumnswACLEtherRuleRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.5.2.2 | TableswACLIpRuleTable | not-accessible | current | |
| 1.3.6.1.4.1.171.11.5.2.2.1 | RowswACLIpRuleEntry | not-accessible | current | |
| 1.3.6.1.4.1.171.11.5.2.2.1.1 | ColumnswACLIpRuleProfileID | read-only | current | The ID of ACL mask entry ,and is unique in the mask list. |
| 1.3.6.1.4.1.171.11.5.2.2.1.2 | ColumnswACLIpRuleAccessID | read-only | current | The ID of ACL IP rule entry . |
| 1.3.6.1.4.1.171.11.5.2.2.1.3 | ColumnswACLIpRuleVlan | read-create | current | Specifies that the access will apply to only to this VLAN. |
| 1.3.6.1.4.1.171.11.5.2.2.1.4 | ColumnswACLIpRuleSrcIpaddress | read-create | current | Specific an IP source address. |
| 1.3.6.1.4.1.171.11.5.2.2.1.5 | ColumnswACLIpRuleDstIpaddress | read-create | current | Specific an IP destination address. |
| 1.3.6.1.4.1.171.11.5.2.2.1.6 | ColumnswACLIpRuleDscp | read-create | current | Specific the value of dscp, the value can be configured 0 to 63 |
| 1.3.6.1.4.1.171.11.5.2.2.1.7 | ColumnswACLIpRuleProtocol | read-only | current | Specifies the IP protocol which has been configured in swACLIpEntry . |
| 1.3.6.1.4.1.171.11.5.2.2.1.8 | ColumnswACLIpRuleType | read-create | current | Specific that the rule applies to the value of icmp type traffic. |
| 1.3.6.1.4.1.171.11.5.2.2.1.9 | ColumnswACLIpRuleCode | read-create | current | Specific that the rule applies to the value of icmp code traffic. |
| 1.3.6.1.4.1.171.11.5.2.2.1.10 | ColumnswACLIpRuleSrcPort | read-create | current | Specific that the rule applies the range of tcp/udp source port |
| 1.3.6.1.4.1.171.11.5.2.2.1.11 | ColumnswACLIpRuleDstPort | read-create | current | Specific the range of tcp/udp destination port range |
| 1.3.6.1.4.1.171.11.5.2.2.1.12 | ColumnswACLIpRuleFlagBits | read-create | current | A value which indicates the set of TCP flags that this entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for ea… |
| 1.3.6.1.4.1.171.11.5.2.2.1.13 | ColumnswACLIpRuleProtoID | read-create | current | Specific that the rule applies to the value of ip protocol id traffic |
| 1.3.6.1.4.1.171.11.5.2.2.1.14 | ColumnswACLIpRuleUserMask | read-create | current | Specific that the rule applies to the ip protocol id and the range of options behind the IP header. |
| 1.3.6.1.4.1.171.11.5.2.2.1.15 | ColumnswACLIpRuleEnablePriority | read-create | current | Specifies that the access will apply only to packets with priority value. |
| 1.3.6.1.4.1.171.11.5.2.2.1.16 | ColumnswACLIpRulePriority | read-create | current | Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header. |
| 1.3.6.1.4.1.171.11.5.2.2.1.17 | ColumnswACLIpRuleReplacePriority | read-create | current | Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not . |
| 1.3.6.1.4.1.171.11.5.2.2.1.18 | ColumnswACLIpRuleEnableReplaceDscp | read-create | current | Indicate weather the DSCP field can be over-write or not. |
| 1.3.6.1.4.1.171.11.5.2.2.1.19 | ColumnswACLIpRuleRepDscp | read-create | current | specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-… |
| 1.3.6.1.4.1.171.11.5.2.2.1.21 | ColumnswACLIpRulePermit | read-create | current | |
| 1.3.6.1.4.1.171.11.5.2.2.1.22 | ColumnswACLIpRuleRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.5.2.3 | TableswACLPayloadRuleTable | not-accessible | current | |
| 1.3.6.1.4.1.171.11.5.2.3.1 | RowswACLPayloadRuleEntry | not-accessible | current | |
| 1.3.6.1.4.1.171.11.5.2.3.1.1 | ColumnswACLPayloadRuleProfileID | read-only | current | The ID of ACL RULE entry ,and is unique in the mask list. |
| 1.3.6.1.4.1.171.11.5.2.3.1.2 | ColumnswACLPayloadRuleAccessID | read-only | current | th id of the entry |
| 1.3.6.1.4.1.171.11.5.2.3.1.4 | ColumnswACLPayloadRuleOffSet0to15 | read-create | current | The offset of ACL rule entry . |
| 1.3.6.1.4.1.171.11.5.2.3.1.5 | ColumnswACLPayloadRuleOffSet16to31 | read-create | current | The offset of ACL rule entry . |
| 1.3.6.1.4.1.171.11.5.2.3.1.6 | ColumnswACLPayloadRuleOffSet32to47 | read-create | current | The offset of ACL rule entry . |
| 1.3.6.1.4.1.171.11.5.2.3.1.7 | ColumnswACLPayloadRuleOffSet48to63 | read-create | current | The offset of ACL rule entry . |
| 1.3.6.1.4.1.171.11.5.2.3.1.8 | ColumnswACLPayloadRuleOffSet64to79 | read-create | current | The offset of ACL rule entry . |
| 1.3.6.1.4.1.171.11.5.2.3.1.9 | ColumnswACLPayloadRuleEnablePriority | read-create | current | |
| 1.3.6.1.4.1.171.11.5.2.3.1.10 | ColumnswACLPayloadRulePriority | read-create | current | Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header. |
| 1.3.6.1.4.1.171.11.5.2.3.1.11 | ColumnswACLPayloadRuleReplacePriority | read-create | current | |
| 1.3.6.1.4.1.171.11.5.2.3.1.12 | ColumnswACLPayloadRuleEnableReplaceDscp | read-create | current | Indicate wether the DSCP field can be over-write or not |
| 1.3.6.1.4.1.171.11.5.2.3.1.13 | ColumnswACLPayloadRuleRepDscp | read-create | current | specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-… |
| 1.3.6.1.4.1.171.11.5.2.3.1.14 | ColumnswACLPayloadRulePermit | read-create | current | The offset of ACL rule entry . |
| 1.3.6.1.4.1.171.11.5.2.3.1.15 | ColumnswACLPayloadRuleRowStatus | read-create | current | The status of ACL rule entry . |