SWCOMMGMT-MIB
94 objects
The Structure of Common Management Information for the proprietary enterprise.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | IpAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress |
| SWPRIMGMT-MIB | privateMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.201.1.1 | IdentityswComMgmtMIB | The Structure of Common Management Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.2272.1.201.1.1.1 | NodeagentConfigInfo | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1 | NodeprimaryPowerOn | The trap is sent whenever the primary power is turn on. | ||
| 1.3.6.1.4.1.2272.1.201.1.1.1.1 | NodeagentBasicInfo | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.1 | ScalaragentRuntimeSwVersion | read-only | current | This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion woul… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.2 | ScalaragentPromFwVersion | read-only | current | This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion woul… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.3 | ScalaragentHwRevision | read-only | current | This is a textual description of the hardware version and revision. If the version number is one and revision number is zero agentHwRevision would be 'Ver. 1.0' |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.5 | ScalaragentDeviceSerialNumber | read-only | current | The serial number of the device. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.6 | ScalaragentMgmtProtocolCapability | read-only | current | The network management protocol(s) supported by this agent. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.7 | TableagentMibCapabilityTable | not-accessible | current | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1 | RowagentMibCapabilityEntry | not-accessible | current | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.1 | ColumnagentMibCapabilityIndex | read-only | current | A list of agentMibCapabilityDescr entries. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.2 | ColumnagentMibCapabilityDescr | read-only | current | The name of the MIB supported by the agent. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.3 | ColumnagentMibCapabilityVersion | read-only | current | The version of the MIB specified in this entry. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.4 | ColumnagentMibCapabilityType | read-only | current | The type of the MIB specified in this entry. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.8 | ScalaragentStatusConsoleInUse | read-only | current | This indicates whether console is currently in-use. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.9 | ScalaragentSerialPortDataBits | read-only | current | The number of data bits, per byte of data, this port should send/receive. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.10 | ScalaragentSerialPortParityBits | read-only | current | The Parity for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.11 | ScalaragentSerialPortStopBits | read-only | current | The Stop Bits for console mode. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.12 | ScalaragentPrimaryPowerState | read-only | current | The primary power status. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.1.13 | ScalaragentRedundantPowerState | read-only | current | The redundant power status. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2 | NodeagentBasicConfig | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.1 | ScalaragentFirmwareFile | read-write | current | The name of the firmware file to be downloaded. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.2 | ScalaragentFirmwareSourceAddr | read-write | current | The ip address where new firmware file is located on. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.3 | ScalaragentFirmwareUpdateCtrl | read-write | current | while this object is set to 'activate', FTP download is working immediately, and agentFirmwareUpdateState is changed to 'in-process'. The agent always returns … |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.4 | ScalaragentFirmwareUpdateState | read-only | current | status of firmware download control. If the value is 'other', means never firmware updated since device started up. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.5 | ScalaragentSystemRestart | read-write | current | This object indicates the agent system restart state. Setting this object to no-restart(3) has no effect. Setting this object to cold-start(2) will restart the… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.6 | ScalaragentRs232PortConfig | read-write | current | This object indicates the RS-232 mode while device restart. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.7 | ScalaragentBaudRateConfig | read-write | current | This object indicates the baud rate while device restart. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.8 | ScalaragentAutoLogoutConfig | read-write | current | This object indicates the time which the console will log out the current user if there is no user input. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.9 | ScalaragentTelnetState | read-write | current | This object decide the TELNET enabled or disabled. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.10 | ScalaragentWebState | read-write | current | This object decide the WEB enabled or disabled. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.2.11 | ScalaragentFactoryReset | read-write | current | This object indicates the agent system reset state. Setting this object to no-reset(5) has no effect. Setting this object to reset(2) will reset the agent to d… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3 | NodeagentIpProtoConfig | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.1 | ScalaragentIpNumOfIf | read-only | current | The total number of IP interfaces supported by this agent. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2 | TableagentIpIfTable | not-accessible | current | A list of IP interface entries supported by the agent. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1 | RowagentIpIfEntry | not-accessible | current | An agentIPIfEntry contains information about a particular IP interface. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.1 | ColumnagentIpIfIndex | read-only | current | This object uniquely identifies the IP interface number in the agentIpIfTable. This value should never greater than agentIpNumOfIf. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.2 | ColumnagentIpIfAddress | read-only | current | The IP address of the interface. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.3 | ColumnagentIpIfNetMask | read-only | current | The IP net mask for this interface. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.4 | ColumnagentIpIfDefaultRouter | read-only | current | The default gateway for this IP interface. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.5 | ColumnagentIpIfMacAddr | read-only | current | The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of ze… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.6 | ColumnagentIpIfType | read-only | current | The physical layer interface of the IP interface. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.3 | ScalaragentIpBootServerAddr | read-only | current | The IP Address of Boot Server. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.4 | ScalaragentIpGetIpFromBootpServer | read-write | current | This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.5 | ScalaragentIpSystemIpAddr | read-write | current | The system IP address. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.6 | ScalaragentIpSystemSubnetMask | read-write | current | The system subnet mask. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.3.7 | ScalaragentIpDefaultGateway | read-write | current | The system default gateway. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.4 | TableagentCommunityTable | not-accessible | current | A list of SNMP community string. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.4.1 | RowagentCommunityEntry | not-accessible | current | An agentCommunityEntry contains information about SNMP community string and access level. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.4.1.1 | ColumnagentCommunityString | read-only | current | When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it doesn't match, the user can't ac… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.4.1.2 | ColumnagentCommunityLevel | read-write | current | The access level of SNMP. The value read-only(2) indicates the user only can view the information about this device, but can't modify it. The value read-write(… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.4.1.3 | ColumnagentCommunitystate | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.5 | TableagentTrustHostTable | not-accessible | current | A list of managemnet station IP addresses. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.5.1 | RowagentTrustHostEntry | not-accessible | current | An agentTrustHostEntry contains information about managemnet station IP addresses and port. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.5.1.1 | ColumnagentTrustHostId | read-only | current | This object uniquely identifies the management station in the agentTrustHostTable. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.5.1.2 | ColumnagentTrustHostIPAddr | read-write | current | The IP address of the managemet station. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.5.1.3 | ColumnagentTrustHostState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.5.1.4 | ColumnagentTrustHostIPMask | read-write | current | The IP subnet mask of the managemet station. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.6 | NodeagentLogConfig | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.6.1 | ScalaragentLogUploadLogFileName | read-write | current | The name of the log file to be uploaded from the device to TFTP server when enabling log upload function (by writing agentLogUploadLog). |
| 1.3.6.1.4.1.2272.1.201.1.1.1.6.2 | ScalaragentLogUploadLogSourceAddr | read-write | current | The ip address where been uploaded log file. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.6.3 | ScalaragentLogUploadLog | read-write | current | As the object is set to active, it will immediately invoke log upload function. If set to normal, do nothing. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.6.4 | ScalaragentLogUploadLogState | read-only | current | status of upload log control. If the value is 'other', means never log updated since device started up. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.6.5 | ScalaragentLogClearLog | read-write | current | As the object is set to active, the log table will be clear. If set to normal, do nothing. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.7 | NodeagentTblSize | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.7.1 | ScalaragentArpNumber | read-only | current | The number of current ipNetToMediaTable entries that are not invalid. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.7.2 | ScalaragentIpNumber | read-only | current | The number of current IP interface on this device. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.7.3 | ScalaragentStaticVlanNumber | read-only | current | The number of static VLAN on this device. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.8 | NodeagentRTC | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.8.1 | ScalaragentRTCYear | read-write | current | The number of the year. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.8.2 | ScalaragentRTCMonth | read-write | current | The number of the month. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.8.3 | ScalaragentRTCDate | read-write | current | The number of the date. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.8.4 | ScalaragentRTCHour | read-write | current | The number of the hour. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.8.5 | ScalaragentRTCMinute | read-write | current | The number of the hour. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.8.6 | ScalaragentRTCSecond | read-write | current | The number of the second. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.8.7 | ScalaragentRTCWeekDay | read-only | current | The current week day. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.9 | NodeagentMIBTraps | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.10 | NodeagentSyslog | |||
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.1 | ScalaragentSyslogState | read-write | current | This object decide the Syslog sending message enabled or disabled. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.2 | ScalaragentSyslogMaxHostSupport | read-write | current | The maximum number of syslog servers supported. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3 | TableagentSyslogHostTable | not-accessible | current | This table specifys syslog server configurations. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1 | RowagentSyslogHostEntry | not-accessible | current | A list of information specifies syslog server configurations. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.1 | ColumnagentSyslogHostId | read-only | current | The index of syslog host. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.2 | ColumnagentSyslogHostIp | read-write | current | The IP address of the host. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.3 | ColumnagentSyslogHostSeverity | read-write | current | The object indicates the severity level indicator.The device support four severity levels in SYSLOG protocol. The fatal(3) mapping to emergency and critical le… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.4 | ColumnagentSyslogHostFacility | read-write | current | Some of the operating system daemons and processes have been assigned Facility values. Processes and daemons that have not been explicitly assigned a Facility … |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.5 | ColumnagentSyslogHostUDPPort | read-write | current | The object indicates UDP port number. |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.6 | ColumnagentSyslogHostState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.2272.1.201.1.1.1.10.4 | ScalaragentRemoteUserLogState | read-write | current | This object decide the remote user log message will be shown on screen or not. |
| 1.3.6.1.4.1.2272.1.201.1.1.2 | NodeprimaryPowerOff | The trap is sent whenever the primary power is turn off. | ||
| 1.3.6.1.4.1.2272.1.201.1.1.3 | NoderedundantPowerOn | The trap is sent whenever the redundant power is turn on. | ||
| 1.3.6.1.4.1.2272.1.201.1.1.4 | NoderedundantPowerOff | The trap is sent whenever the redundant power is turn off. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ErrorReturnCode | INTEGER { cannotModifyMltMemberPort(201), onlyOnePortInMlt(202), moreThan4PortsInMlt(203), mltWithDifferentVlan(204), cannotModifyVlanPortWithMltMemberPort(205), arpClassIdSpecified(206), arpClassIdOnlyForIpSubnetVlan(207), ipSubnetVlanArpClassIdCannotBeZero(208), arpClassIdWithExistVid(209) } | current | This variable is used primarily as an enumeration to list the proprietary return codes that this device can send to a management station in response to a failed SNMP operation. |