SWITCH-CHASSIS-MIB
72 objects
The MIB module for SWITCH chassis entity.
Imported Objects
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeStamp |
| TELESYN-ATI-TC | switchChassis |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.9.1.1 | IdentityswitchChassisMib | The MIB module for SWITCH chassis entity. | ||
| 1.3.6.1.4.1.207.8.9.1.1.1 | NodechassisParams | |||
| 1.3.6.1.4.1.207.8.9.1.1.1.1 | ScalarchassisSerialNumber | read-only | current | The serial number of the chassis. |
| 1.3.6.1.4.1.207.8.9.1.1.1.2 | ScalarchassisHwId | read-only | current | A version number for the motherboard - first 16 bits is the major number, second 16 bits is the minor number. |
| 1.3.6.1.4.1.207.8.9.1.1.1.3 | ScalarchassisOSVersion | read-only | current | Software version of the operating system kernel. |
| 1.3.6.1.4.1.207.8.9.1.1.1.4 | ScalarchassisFwVersion | read-only | current | The chassis firmware version. |
| 1.3.6.1.4.1.207.8.9.1.1.1.5 | ScalarchassisLastChanges | read-only | current | Counts the number of times the system config file has been written to flash since last reboot. |
| 1.3.6.1.4.1.207.8.9.1.1.1.6 | ScalarchassisBaseMacAddress | read-only | current | This object is the 6-byte 'base' MAC address for this chassis. |
| 1.3.6.1.4.1.207.8.9.1.1.1.7 | ScalarchassisFanStatus | read-only | current | The operational status of fan. 'slowOrStopped' indicates the fan rpm is lower than a minimum required value. |
| 1.3.6.1.4.1.207.8.9.1.1.1.8 | ScalarchassisBoardSerialNumber | read-only | current | The serial number of the mother board. |
| 1.3.6.1.4.1.207.8.9.1.1.3 | NodeipParams | |||
| 1.3.6.1.4.1.207.8.9.1.1.3.1 | ScalaripAddr | read-write | obsolete | The IP address that the device will use after a restart. The device's active IP address can be determined by examining the appropriate instance of the ipAdEntA… |
| 1.3.6.1.4.1.207.8.9.1.1.3.2 | ScalaripNetMask | read-write | obsolete | The subnet mask that the device will use after a restart. The device's active subnet mask can be determined by examining the appropriate instance of the ipAdEn… |
| 1.3.6.1.4.1.207.8.9.1.1.3.3 | ScalaripBcastForm | read-write | obsolete | The type of IP broadcast address that the device will use after a restart: the Internet standard all-ones broadcast address or the non- standard all zeros broa… |
| 1.3.6.1.4.1.207.8.9.1.1.3.4 | ScalaripEncap | read-write | obsolete | The type of IP datagram encapsulation that the device will use after a restart: Ethernet or IEEE802.2. The active type of IP datagram encapsulation can be dete… |
| 1.3.6.1.4.1.207.8.9.1.1.3.5 | ScalaripDefaultGateway | read-write | obsolete | The default gateway IP address that the device will use after a restart. The device's operational default gateway IP address can be determined by examining the… |
| 1.3.6.1.4.1.207.8.9.1.1.3.6 | ScalaripDomainName | read-write | obsolete | The device's domain name. |
| 1.3.6.1.4.1.207.8.9.1.1.4 | NodesysConfigParams | |||
| 1.3.6.1.4.1.207.8.9.1.1.4.1 | ScalarbootFlag | read-write | deprecated | Boot flags to define the startup parameters |
| 1.3.6.1.4.1.207.8.9.1.1.4.2 | ScalardramSize | read-only | current | DRAM size in bytes |
| 1.3.6.1.4.1.207.8.9.1.1.4.3 | ScalarcpuVer | read-only | current | Hardware identifier of the processor. |
| 1.3.6.1.4.1.207.8.9.1.1.4.4 | ScalariscVer | read-only | current | Hardware identifier of the Galileo chip. |
| 1.3.6.1.4.1.207.8.9.1.1.4.5 | ScalarpigVer | read-only | current | Hardware identifier of the PIG chip. |
| 1.3.6.1.4.1.207.8.9.1.1.4.6 | ScalarpostVer | read-only | current | Software version of the POST diagnostic. |
| 1.3.6.1.4.1.207.8.9.1.1.4.7 | ScalarisdVer | read-only | current | Software version of the ISD diagnostic. |
| 1.3.6.1.4.1.207.8.9.1.1.4.8 | ScalarbootVer | read-only | current | Software version of the boot prom. |
| 1.3.6.1.4.1.207.8.9.1.1.4.9 | ScalarqmuMemSize | read-only | current | QME memory size |
| 1.3.6.1.4.1.207.8.9.1.1.4.10 | TablesegBusTable | not-accessible | current | A table of attributes associated with segBus. |
| 1.3.6.1.4.1.207.8.9.1.1.4.10.1 | RowsegBusEntry | not-accessible | current | A list of attributes associated with a segBus. |
| 1.3.6.1.4.1.207.8.9.1.1.4.10.1.1 | ColumnsegBusIndex | not-accessible | current | SegBus number |
| 1.3.6.1.4.1.207.8.9.1.1.4.10.1.2 | ColumnsegBusPmiuId | read-only | current | Hardware identifier of the Port Manager Interface Unit (PMIU) chip |
| 1.3.6.1.4.1.207.8.9.1.1.4.10.1.3 | ColumnsegBusQmuId | read-only | current | Hardware identifier of the Queue Management Unit (QMU) chip |
| 1.3.6.1.4.1.207.8.9.1.1.6 | NodesnmpParams | |||
| 1.3.6.1.4.1.207.8.9.1.1.6.1 | TablesnmpIpTrapRcvrTable | not-accessible | current | A list of entries containing information about network management stations with Ip addresses that are to receive traps generated by this device over UDP. |
| 1.3.6.1.4.1.207.8.9.1.1.6.1.1 | RowsnmpIpTrapRcvrEntry | not-accessible | current | An entry containing information about a single network management station with an Ip address that is to receive traps generated by this device over UDP. |
| 1.3.6.1.4.1.207.8.9.1.1.6.1.1.1 | ColumnsnmpIpTrapRcvrIpAddress | not-accessible | current | The Ip address of this trap receiver. |
| 1.3.6.1.4.1.207.8.9.1.1.6.1.1.2 | ColumnsnmpIpTrapRcvrPort | read-create | current | The UDP port number for the Trap receiver. |
| 1.3.6.1.4.1.207.8.9.1.1.6.1.1.3 | ColumnsnmpIpTrapRcvrCommunity | read-create | current | The community string to be specified in traps sent to this ip trap receiver. |
| 1.3.6.1.4.1.207.8.9.1.1.6.1.1.4 | ColumnsnmpIpTrapRcvrStatus | read-create | current | This object is used to create or delete entries in the snmpIpTrapRcvrTable. |
| 1.3.6.1.4.1.207.8.9.1.1.6.2 | ScalarsnmpUnAuthIpAddr | read-only | current | The IP address of the last management station that attempted to access this agent with an invalid community string. This object is used as a variable binding i… |
| 1.3.6.1.4.1.207.8.9.1.1.6.3 | ScalarsnmpUnAuthCommunity | read-only | current | The community string specified by the most recent unauthenticated attempt to access this agent. This object is used as a variable binding in an Authentication … |
| 1.3.6.1.4.1.207.8.9.1.1.7 | NodeconsoleParams | |||
| 1.3.6.1.4.1.207.8.9.1.1.7.1 | ScalarconsolePortSpeed | read-write | deprecated | The speed of the console port in bits per second. |
| 1.3.6.1.4.1.207.8.9.1.1.7.2 | ScalarconsolePortDataBits | read-write | deprecated | The console port's number of data bits. |
| 1.3.6.1.4.1.207.8.9.1.1.7.3 | ScalarconsolePortStopBits | read-write | deprecated | The console port's number of stop bits. |
| 1.3.6.1.4.1.207.8.9.1.1.7.4 | ScalarconsolePortParity | read-write | deprecated | The console port's parity setting. |
| 1.3.6.1.4.1.207.8.9.1.1.8 | NodelogParams | |||
| 1.3.6.1.4.1.207.8.9.1.1.8.1 | ScalareventLogEnable | read-write | current | The value of this object indicates whether or not system event logging is currently enabled. Changes to this object take effect immediately. |
| 1.3.6.1.4.1.207.8.9.1.1.8.2 | ScalareventLogSize | read-only | current | The maximum number of entries retrievable from the system event log. If the value of this object is greater than the value of the eventLogCount object, then on… |
| 1.3.6.1.4.1.207.8.9.1.1.8.3 | ScalareventLogCount | read-only | current | The total number of events logged to the system event log. If the value of this object exceeds the value of the eventLogSize object, only the most recent event… |
| 1.3.6.1.4.1.207.8.9.1.1.8.4 | TableeventLogTable | not-accessible | current | A list of system event log entries. |
| 1.3.6.1.4.1.207.8.9.1.1.8.4.1 | RoweventLogEntry | not-accessible | current | A single system event log entry. |
| 1.3.6.1.4.1.207.8.9.1.1.8.4.1.1 | ColumneventLogIndex | not-accessible | current | A unique value for each entry in the event log. Its value is between 1 and the minimum of the value of the eventLogSize and eventLogCount objects. The oldest e… |
| 1.3.6.1.4.1.207.8.9.1.1.8.4.1.2 | ColumneventLogTime | read-only | current | The time (according to the system clock) in human-readable form at which this system event log entry was logged. |
| 1.3.6.1.4.1.207.8.9.1.1.8.4.1.3 | ColumneventLogDescr | read-only | current | A human-readable string describing the event represented by this system event log entry. |
| 1.3.6.1.4.1.207.8.9.1.1.8.4.1.4 | ColumneventLogDetail | read-only | current | A human-readable string providing more detailed information about the event respresented by this system event log entry. |
| 1.3.6.1.4.1.207.8.9.1.1.8.4.1.5 | ColumneventLogRawEntry | read-only | current | The first 255 octets of raw, unformatted system event log entry as it appears internally. |
| 1.3.6.1.4.1.207.8.9.1.1.9 | NodebootParams | |||
| 1.3.6.1.4.1.207.8.9.1.1.9.1 | ScalardeviceReset | read-write | current | The value of this object returned in response to an SNMP Get or Get-Next request is always noOp(1). Changing the value of this object to reset(2) will cause th… |
| 1.3.6.1.4.1.207.8.9.1.1.9.4 | NodetftpGroup | |||
| 1.3.6.1.4.1.207.8.9.1.1.9.4.1 | ScalartftpServerName | read-write | current | The name of the TFTP server from which to read or write the device's configuration files or from which to read a firmware image. The value of this object can b… |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.2 | ScalartftpUserName | read-write | current | The user name that makes the TFTP request. This object may be set only if tftpAdminStatus has the value 'configure'. |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.3 | ScalartftpRemoteFileName | read-write | current | The file name of the file on the remote TFTP server. This object may be set only if tftpAdminStatus has the value 'configure'. |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.4 | ScalartftpLocalFileName | read-write | current | The local file name of the file which is copied to or from the remote server. If this string is a 0 length string, then the value of tftpRemoteFileName shall a… |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.5 | ScalartftpOperation | read-write | current | When tftpOperation has the value putFile(1) when tftpAdminStatus is set to 'execute', the device attempts to copy the file identified by tftpLocalFileName to t… |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.6 | ScalartftpAdminState | read-write | current | This object is used to initiate a file transfer using the TFTP protocol between the local system and a remote TFTP server identified by tftpServerAddr. The fil… |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.7 | ScalartftpOperationState | read-only | current | The value 'executing' reflects a transition of tftpAdminState from 'configure' to 'execute'. In the 'executing' state, the TFTP operation identified by the val… |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.8 | ScalartftpOperationStateChange | read-only | current | This is the value of sysUpTime when the value of tftpOperationState changes. |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.9 | ScalartftpErrorMessage | read-only | current | An error message giving a brief description of the error if the tftpOperation did not succeed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HostNameOrIpAddr | DisplayString | current | The DNS, NIS (or equivalent name), or the ip address (in dotted quad notation) of the host. |
| HwIdentifier | OCTET STRING (SIZE(4)) | current | The hardware identifier consists of 2 16 bit values, called major and minor. The first 2 octets contain the major number; the second 2 octets contain the minor number. |
| SwVersionId | OCTET STRING (SIZE(6)) | current | The software version id consists of 3 16 bit values. The first 2 octets contain the major number; the octets 3, 4 contain the minor number, octets 5,6 contain a release number. |