MIB Viewer

SWITCHING-EXTENSION-MIB

454 objects
QCI switching extension MIB
Imported Objects
IANAifType-MIBIANAifType
IF-MIBifIndex InterfaceIndex InterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress InetAddressType
Q-BRIDGE-MIBdot1qFdbId dot1qVlanIndex VlanIndex
QUANTA-SWITCH-MIBAgentPortMask quanta switch
RFC1213-MIBDisplayString PhysAddress
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMIInteger32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCMacAddress RowStatus TEXTUAL-CONVENTION TimeStamp
SWITCHING-MIBVlanList
OIDNameAccessStatusDescription
1.3.6.1.4.1.7244.2.101IdentityswitchingExtensionQCI switching extension MIB
1.3.6.1.4.1.7244.2.101.1NodeagentInfoGroupExtension
1.3.6.1.4.1.7244.2.101.1.1NodeagentInventoryGroupExtension
1.3.6.1.4.1.7244.2.101.1.1.100ScalaragentInventroyHardwareVersionread-onlycurrentThe switch's hardware version.
1.3.6.1.4.1.7244.2.101.1.1.102ScalaragentInventoryLoaderVersionread-onlycurrentThe Switch's loader version
1.3.6.1.4.1.7244.2.101.1.1.103ScalaragentInventoryBootRomVersionread-onlycurrentThe switch's Boot Rom Version.
1.3.6.1.4.1.7244.2.101.1.1.104ScalaragentInventoryOpCodeVersionread-onlycurrentThe switch's Operation Code version.
1.3.6.1.4.1.7244.2.101.1.1.105ScalaragentInventoryLabelRevNumberread-onlycurrentThe switch's Label Revision Number.
1.3.6.1.4.1.7244.2.101.1.1.106TableagentTemperatureFanStatusTablenot-accessiblecurrentThe switch's temperature and FANs information table
1.3.6.1.4.1.7244.2.101.1.1.106.1RowagentTemperatureFanStatusEntrynot-accessiblecurrententry of temperature and FANs information table
1.3.6.1.4.1.7244.2.101.1.1.106.1.1ColumnagentTemperatureFanUnitIndexread-onlycurrentUnique index of temperature and FANs Information entry
1.3.6.1.4.1.7244.2.101.1.1.106.1.2ColumnagentTemperatureread-onlycurrenttemperature of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.11ColumnagentTemperature1read-onlycurrenttemperature 1 of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.12ColumnagentTemperature2read-onlycurrenttemperature 2 of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.13ColumnagentTemperature3read-onlycurrenttemperature 3 of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.14ColumnagentTemperature4read-onlycurrenttemperature 4 of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.15ColumnagentTemperature5read-onlycurrenttemperature 5 of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.21ColumnagentFAN1read-onlycurrentFAN1 status of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.22ColumnagentFAN2read-onlycurrentFAN2 status of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.23ColumnagentFAN3read-onlycurrentFAN3 status of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.24ColumnagentFAN4read-onlycurrentFAN3 status of the unit
1.3.6.1.4.1.7244.2.101.1.1.106.1.31ColumnagentFANChipTyperead-onlycurrentfan chip type of the unit
1.3.6.1.4.1.7244.2.101.1.1.107TableagentPowerSupplyStatusTablenot-accessiblecurrentThe switch's power supplies information table
1.3.6.1.4.1.7244.2.101.1.1.107.1RowagentPowerSupplyStatusEntrynot-accessiblecurrententry of power supplies information table
1.3.6.1.4.1.7244.2.101.1.1.107.1.1ColumnagentPowerSupplyUnitIndexread-onlycurrentUnique index of power supplies Information entry
1.3.6.1.4.1.7244.2.101.1.1.107.1.2ColumnagentPowerSupplyStatusread-onlycurrentstatus of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.3ColumnagentPowerSupplyNameread-onlycurrentname of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.4ColumnagentPowerSupplyModelread-onlycurrentmodel of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.5ColumnagentPowerSupplyRevisionNumberread-onlycurrentrevision number of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.6ColumnagentPowerSupplyManufacturerLocationread-onlycurrentmanufacturer location of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.7ColumnagentPowerSupplyManufacturingDateread-onlycurrentmanufacturing date of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.8ColumnagentPowerSupplySerialNumberread-onlycurrentserial number of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.9ColumnagentPowerSupplyTemperature1read-onlycurrenttemperature 1 of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.10ColumnagentPowerSupplyTemperature2read-onlycurrenttemperature 2 of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.11ColumnagentPowerSupplyFanSpeedread-onlycurrentfan speed of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.12ColumnagentPowerSupplyFanDutyread-onlycurrentfan duty of the power supply
1.3.6.1.4.1.7244.2.101.1.1.107.1.13ColumnagentPowerConsumptionread-onlycurrentpower consumption of the power supply
1.3.6.1.4.1.7244.2.101.1.1.108TableagentDOMTablenot-accessiblecurrentThe switch's dom information table
1.3.6.1.4.1.7244.2.101.1.1.108.1RowagentDOMEntrynot-accessiblecurrententry of dom information table
1.3.6.1.4.1.7244.2.101.1.1.108.1.1ColumnagentDOMtransceiverIndexread-onlycurrentUnique index of dom Information entry
1.3.6.1.4.1.7244.2.101.1.1.108.1.2ColumnagentDOMTemperatureread-onlycurrenttemperature of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.3ColumnagentDOMVoltageread-onlycurrentvotage of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.4ColumnagentDOMBiasread-onlycurrentBias current of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.5ColumnagentDOMTxpowerread-onlycurrentTx Power of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.6ColumnagentDOMRxpowerread-onlycurrentRx Power of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.7ColumnagentDOMtemperatureHighAlarmread-onlycurrentTemperature high alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.8ColumnagentDOMtemperatureHighWarningread-onlycurrentTemperature high warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.9ColumnagentDOMtemperatureLowWarningread-onlycurrentTemperature low warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.10ColumnagentDOMtemperatureLowAlarmread-onlycurrentTemperature low alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.11ColumnagentDOMvotageHighAlarmread-onlycurrentVotage high alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.12ColumnagentDOMvotageHighWarningread-onlycurrentVotage high warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.13ColumnagentDOMvotageLowWarningread-onlycurrentVotage low warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.14ColumnagentDOMvotageLowAlarmread-onlycurrentVotage low alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.15ColumnagentDOMbiasHighAlarmread-onlycurrentBias high alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.16ColumnagentDOMbiasHighWarningread-onlycurrentBias high warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.17ColumnagentDOMbiasLowWarningread-onlycurrentBias low warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.18ColumnagentDOMbiasLowAlarmread-onlycurrentBias low alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.19ColumnagentDOMtxpowerHighAlarmread-onlycurrentTx Power high alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.20ColumnagentDOMtxpowerHighWarningread-onlycurrentTx Power high warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.21ColumnagentDOMtxpowerLowWarningread-onlycurrentTx Power low warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.22ColumnagentDOMtxpowerLowAlarmread-onlycurrentTx Power low alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.23ColumnagentDOMrxpowerHighAlarmread-onlycurrentRx Power high alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.24ColumnagentDOMrxpowerHighWarningread-onlycurrentRx Power high warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.25ColumnagentDOMrxpowerLowWarningread-onlycurrentRx Power low warning of the transceiver module
1.3.6.1.4.1.7244.2.101.1.1.108.1.26ColumnagentDOMrxpowerLowAlarmread-onlycurrentRx Power low alarm of the transceiver module
1.3.6.1.4.1.7244.2.101.1.2Nodeagent10GModuleInfoGroupExtension
1.3.6.1.4.1.7244.2.101.1.2.107Tableagent10GModuleTablenot-accessiblecurrentThe switch's 10G module information table
1.3.6.1.4.1.7244.2.101.1.2.107.1Rowagent10GModuleEntrynot-accessiblecurrententry of 10G module information table
1.3.6.1.4.1.7244.2.101.1.2.107.1.1Columnagent10GModuleUnitIndexread-onlycurrentThe unit number associated with this unit.
1.3.6.1.4.1.7244.2.101.1.2.107.1.2Columnagent10GModuleSlotIndexread-onlycurrentUnique slot index in 10G module entry.
1.3.6.1.4.1.7244.2.101.1.2.107.1.3Columnagent10GModulePortIndexread-onlycurrentUnique port index of the slot in 10G module entry.
1.3.6.1.4.1.7244.2.101.1.2.107.1.4Columnagent10GModuleIndexread-onlycurrentUnique index of 10G module entry.
1.3.6.1.4.1.7244.2.101.1.2.107.1.5Columnagent10GModuleInterfaceNumberread-onlycurrentInterface number of the corresponding 10G module index entry.
1.3.6.1.4.1.7244.2.101.1.2.107.1.6Columnagent10GModuleTyperead-onlycurrent10G module's types. It could be CX4 or SFP Plus.
1.3.6.1.4.1.7244.2.101.1.2.107.1.7Columnagent10GModuleComplianceCoderead-onlycurrent10G module's Compliance codes
1.3.6.1.4.1.7244.2.101.1.2.107.1.8Columnagent10GModuleVendorNameread-onlycurrent10G module's vendor name.
1.3.6.1.4.1.7244.2.101.1.2.107.1.9Columnagent10GModulePartNumberread-onlycurrent10G module's part number.
1.3.6.1.4.1.7244.2.101.1.2.107.1.10Columnagent10GModuleSerialNumberread-onlycurrent10G module's serial number.
1.3.6.1.4.1.7244.2.101.1.2.107.1.11Columnagent10GModuleRevisionNumberread-onlycurrent10G module's revision number.
1.3.6.1.4.1.7244.2.101.1.2.107.1.12Columnagent10GModuleManufacturingDateread-onlycurrent10G module's Manufacturing date.
1.3.6.1.4.1.7244.2.101.1.3TableagentGBICInfoTablenot-accessiblecurrentThe switch's GBIC information table
1.3.6.1.4.1.7244.2.101.1.3.1RowagentGBICInfoEntrynot-accessiblecurrententry of GBIC information table
1.3.6.1.4.1.7244.2.101.1.3.1.1ColumnagentGBICInfoIndexread-onlycurrentUnique index of GBIC Information entry
1.3.6.1.4.1.7244.2.101.1.3.1.2ColumnagentGBICInfoInterfaceNumberread-onlycurrentinterface number of the corresponding GBIC index entry
1.3.6.1.4.1.7244.2.101.1.3.1.3ColumnagentGBICInfoComplianceCoderead-onlycurrentGigabit Ethernet Compliance codes
1.3.6.1.4.1.7244.2.101.1.3.1.4ColumnagentGBICInfoVendorNameread-onlycurrentGBIC vendor name
1.3.6.1.4.1.7244.2.101.1.3.1.5ColumnagentGBICInfoPartNumberread-onlycurrentGBIC part number
1.3.6.1.4.1.7244.2.101.1.3.1.6ColumnagentGBICInfoSerialNumberread-onlycurrentGBIC serial number
1.3.6.1.4.1.7244.2.101.1.3.1.7ColumnagentGBICInfoRevisionNumberread-onlycurrentGBIC revision number
1.3.6.1.4.1.7244.2.101.1.3.1.8ColumnagentGBICInfoManufacturingDateread-onlycurrentGBIC manufacturing date
1.3.6.1.4.1.7244.2.101.2NodeagentConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.1NodeagentCLIConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.1.5NodeagentSerialGroupExtension
1.3.6.1.4.1.7244.2.101.2.1.5.100ScalaragentSerialPasswdCntread-writecurrentThe switch's serial port password count threshold.
1.3.6.1.4.1.7244.2.101.2.1.5.101ScalaragentSerialPasswdCntSetToDefaultread-writecurrentSet the switch's serial port password count threshold to the default value.
1.3.6.1.4.1.7244.2.101.2.1.5.102ScalaragentSerialSilentTimeread-writecurrentIf a user fail to login into the console for agentSerialPasswdCnt times, the user cannot login again for a period of agentSerialSilentTime seconds
1.3.6.1.4.1.7244.2.101.2.1.5.103ScalaragentSerialSilentTimeSetToDefaultread-writecurrentSet the switch's serial port silent time to the default value.
1.3.6.1.4.1.7244.2.101.2.1.6NodeagentVtyGroupExtension
1.3.6.1.4.1.7244.2.101.2.1.6.103ScalaragentVtyTelnetServerAdminModeread-writecurrentThe switch's telnet server admin mode.
1.3.6.1.4.1.7244.2.101.2.1.6.104ScalaragentVtyPasswdCntread-writecurrentThe switch's password count threshold for telnet and SSH connections. System will reject telnet or SSH connections if users fail the password authentication fo…
1.3.6.1.4.1.7244.2.101.2.1.6.105ScalaragentVtyPasswdCntSetToDefaultread-writecurrentSet the switch's password count threshold to the default value for telnet and SSH connections.
1.3.6.1.4.1.7244.2.101.2.1.6.106ScalaragentVtyTerminalLengthread-writecurrentThe switch's terminal length for telnet connections.
1.3.6.1.4.1.7244.2.101.2.1.6.107ScalaragentVtyTerminalLengthSetToDefaultread-writecurrentSet the switch's terminal length to the default value for telnet connections.
1.3.6.1.4.1.7244.2.101.2.3NodeagentNetworkConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.3.100ScalaragentNetworkHttpPortread-writecurrentThe switch's HTTP port number.
1.3.6.1.4.1.7244.2.101.2.3.101ScalaragentNetworkDhcpClientIfClientIdFormatread-writecurrentSet the switch's client ID agentNetworkDhcpClientIfClientId format. It could be HEX(00:00:00:00:00:00) or TEXT( which length is less or equal to 32)
1.3.6.1.4.1.7244.2.101.2.3.102ScalaragentNetworkDhcpClientIfClientIdread-writecurrentSet the switch's Client ID. The client ID is used in asking for an IP address from the DHCP server. It could be HEX(00:00:00:00:00:00) or TEXT( which length is…
1.3.6.1.4.1.7244.2.101.2.3.103ScalaragentNetworkDhcpSetToInventoryClientIfClientIdread-writecurrentIf enable, set switch's Client ID to the inventory's default value
1.3.6.1.4.1.7244.2.101.2.3.104ScalaragentNetworkDhcpRestartread-writeobsoleteIf restart, release current IP address and Re-get the switch's IP address from the DHCP/BOOTP server
1.3.6.1.4.1.7244.2.101.2.8NodeagentSwitchConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.8.6NodeagentSwitchSnoopingGroupExtension
1.3.6.1.4.1.7244.2.101.2.8.6.112TableagentIgmpSnoopL2MulticastStaticTablenot-accessiblecurrentTable for IGMP snooping static multicast addresses.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1RowagentIgmpSnoopL2MulticastStaticEntrynot-accessiblecurrentEntry for static multicast addresses.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1.1ColumnagentIgmpSnoopL2MulticastStaticIndexread-onlycurrentUnique index of agentIgmpSnoopL2MulticastStaticEntry.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1.2ColumnagentIgmpSnoopL2MulticastStaticVlanIdread-onlycurrentThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1.3ColumnagentIgmpSnoopL2MulticastStaticMacAddressread-onlycurrentMAC address of multicast group.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1.4ColumnagentIgmpSnoopL2MulticastStaticMemberPortMaskread-onlycurrentIGMP Snooping L2 Multicast Static Port Mask.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1.5ColumnagentIgmpSnoopL2MulticastStaticActivePortMaskread-onlycurrentIGMP Snooping L2 Multicast Static Active Port Mask.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1.6ColumnagentIgmpSnoopL2MulticastStaticMemberPortsread-createcurrentThe set of ports which are members. (2,3) means port 2 and port 3 are Multicast Static Ports.
1.3.6.1.4.1.7244.2.101.2.8.6.112.1.7ColumnagentIgmpSnoopL2MulticastStaticActivePortsread-onlycurrentThe set of ports which are active. (2,3) means port 2 and port 3 are active.
1.3.6.1.4.1.7244.2.101.2.8.6.113TableagentMldSnoopL2MulticastStaticTablenot-accessiblecurrentTable for MLD snooping static multicast addresses.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1RowagentMldSnoopL2MulticastStaticEntrynot-accessiblecurrentEntry for static multicast addresses.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1.1ColumnagentMldSnoopL2MulticastStaticIndexread-onlycurrentUnique index of agentMldSnoopL2MulticastStaticEntry.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1.2ColumnagentMldSnoopL2MulticastStaticVlanIdread-onlycurrentThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1.3ColumnagentMldSnoopL2MulticastStaticMacAddressread-onlycurrentMAC address of multicast group.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1.4ColumnagentMldSnoopL2MulticastStaticMemberPortMaskread-onlycurrentMLD Snooping L2 Multicast Static Port Mask.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1.5ColumnagentMldSnoopL2MulticastStaticActivePortMaskread-onlycurrentMLD Snooping L2 Multicast Static Active Port Mask.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1.6ColumnagentMldSnoopL2MulticastStaticMemberPortsread-createcurrentThe set of ports which are members. (2,3) means port 2 and port 3 are Multicast Static Ports.
1.3.6.1.4.1.7244.2.101.2.8.6.113.1.7ColumnagentMldSnoopL2MulticastStaticActivePortsread-onlycurrentThe set of ports which are active. (2,3) means port 2 and port 3 are active.
1.3.6.1.4.1.7244.2.101.2.8.10NodeagentIPFilterConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.8.10.10ScalaragentIPFilterConfigAdminModeread-writecurrentenable/disable IP filter function of the switch.
1.3.6.1.4.1.7244.2.101.2.8.10.11ScalaragentIpFilterConfigCreateread-writecurrentCreates a new IpFilter entry with name and ip mask or ipv6/prefix length. Max length of ip filter name is 64. Ipv4 Example: IpFilterName 1.1.1.1 255.255.255.0 …
1.3.6.1.4.1.7244.2.101.2.8.10.12ScalaragentIpFilterConfigDeleteread-writecurrentDelete a IpFilter entry by name.
1.3.6.1.4.1.7244.2.101.2.8.10.30TableagentIpFilterConfigTablenot-accessiblecurrentThe switch's IP filter table
1.3.6.1.4.1.7244.2.101.2.8.10.30.1RowagentIpFilterConfigEntrynot-accessiblecurrententry of IP filter table
1.3.6.1.4.1.7244.2.101.2.8.10.30.1.1ColumnagentIpFilterConfigIndexread-onlycurrentUnique index of IP Filter entry
1.3.6.1.4.1.7244.2.101.2.8.10.30.1.2ColumnagentIpFilterConfigIPread-writecurrentset the IPv4/IPv6 address which are allowed to connect to DUT IP should be changed with mask.
1.3.6.1.4.1.7244.2.101.2.8.10.30.1.3ColumnagentIpFilterConfigMaskread-writecurrentset the IPv4/IPv6 mask for defining an IPv4/IPv6 range. IP should be changed with mask.
1.3.6.1.4.1.7244.2.101.2.8.10.30.1.4ColumnagentIpFilterConfigNameread-writecurrentThe name of IpFilter entry.
1.3.6.1.4.1.7244.2.101.2.8.18NodeagentStormContorlConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.8.18.1ScalaragentSwitchBroadcastControlModeread-writecurrentThe switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadca…
1.3.6.1.4.1.7244.2.101.2.8.18.2ScalaragentSwitchMulticastControlModeread-writecurrentThe switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for Multicast Storm Recovery and the multica…
1.3.6.1.4.1.7244.2.101.2.8.18.3ScalaragentSwitchUnicastControlModeread-writecurrentThe switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unicast traff…
1.3.6.1.4.1.7244.2.101.2.8.18.4ScalaragentSwitchDot3FlowControlModeread-writecurrentConfig switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports.
1.3.6.1.4.1.7244.2.101.2.8.18.10TableagentSwitchStormControlBroadcastTablenot-accessiblecurrentThe switch's storm control table
1.3.6.1.4.1.7244.2.101.2.8.18.10.1RowagentSwitchStormControlBroadcastEntrynot-accessiblecurrentstorm control for a specific port.
1.3.6.1.4.1.7244.2.101.2.8.18.10.1.1ColumnagentSwitchBcastStormIfIndexread-onlycurrentUnique index of switch broadcast storm entry
1.3.6.1.4.1.7244.2.101.2.8.18.10.1.2ColumnagentSwitchBcastStormExtensionPktRateread-writecurrentThe Pkt rate, range is from 1 to 14880000.
1.3.6.1.4.1.7244.2.101.2.8.18.10.1.3ColumnagentSwitchBcastStormExtensionAdminModeread-writecurrentenable/disable broadcast storm control
1.3.6.1.4.1.7244.2.101.2.8.18.20TableagentSwitchStormControlMulticastTablenot-accessiblecurrentThe switch's storm control table
1.3.6.1.4.1.7244.2.101.2.8.18.20.1RowagentSwitchStormControlMulticastEntrynot-accessiblecurrentstorm control for a specific port.
1.3.6.1.4.1.7244.2.101.2.8.18.20.1.1ColumnagentSwitchMcastStormIfIndexread-onlycurrentUnique index of switch Multicast storm entry
1.3.6.1.4.1.7244.2.101.2.8.18.20.1.2ColumnagentSwitchMcastStormExtensionPktRateread-writecurrentThe Pkt rate, range is from 1 to 14880000.
1.3.6.1.4.1.7244.2.101.2.8.18.20.1.3ColumnagentSwitchMcastStormExtensionAdminModeread-writecurrentenable/disable Multicast storm control
1.3.6.1.4.1.7244.2.101.2.8.18.30TableagentSwitchStormControlUnicastTablenot-accessiblecurrentThe switch's storm control table
1.3.6.1.4.1.7244.2.101.2.8.18.30.1RowagentSwitchStormControlUnicastEntrynot-accessiblecurrentstorm control for a specific port.
1.3.6.1.4.1.7244.2.101.2.8.18.30.1.1ColumnagentSwitchUcastStormIfIndexread-onlycurrentUnique index of switch Unicast storm entry
1.3.6.1.4.1.7244.2.101.2.8.18.30.1.2ColumnagentSwitchUcastStormExtensionPktRateread-writecurrentThe Pkt rate, range is from 1 to 14880000.
1.3.6.1.4.1.7244.2.101.2.8.18.30.1.3ColumnagentSwitchUcastStormExtensionAdminModeread-writecurrentenable/disable ingress rate limit
1.3.6.1.4.1.7244.2.101.2.8.18.40TableagentSwitchFlowControlTablenot-accessiblecurrentThe switch's storm control table
1.3.6.1.4.1.7244.2.101.2.8.18.40.1RowagentSwitchFlowControlEntrynot-accessiblecurrentstorm control for a specific port.
1.3.6.1.4.1.7244.2.101.2.8.18.40.1.1ColumnagentSwitchFlowControlIfIndexread-onlycurrentUnique index of switch FlowControl storm entry
1.3.6.1.4.1.7244.2.101.2.8.18.40.1.2ColumnagentSwitchFlowControlAdminModeread-writecurrentenable/disable FlowControl storm control
1.3.6.1.4.1.7244.2.101.2.8.18.50TableagentSwitchStormControlActionTablenot-accessiblecurrentThe switch's storm control table
1.3.6.1.4.1.7244.2.101.2.8.18.50.1RowagentSwitchStormControlActionEntrynot-accessiblecurrentstorm control for a specific port.
1.3.6.1.4.1.7244.2.101.2.8.18.50.1.1ColumnagentSwitchStormControlActionIfIndexread-onlycurrentUnique index of switch StormControlAction storm entry
1.3.6.1.4.1.7244.2.101.2.8.18.50.1.2ColumnagentSwitchStormControlActionShutdownModeread-writecurrentShutdown this interface if a storm occurs.
1.3.6.1.4.1.7244.2.101.2.8.18.50.1.3ColumnagentSwitchStormControlActionTrapModeread-writecurrentSend SNMP trap if a storm occurs.
1.3.6.1.4.1.7244.2.101.2.8.28NodeagentErrRecoveryConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.8.28.1ScalaragentErrRecoveryIntervalread-writecurrentConfigure Recovery Timer Interval.
1.3.6.1.4.1.7244.2.101.2.8.28.2ScalaragentErrRecoveryStormCtrlCauseModeread-writecurrentEnable/Disable timer to recover from storm-control error disable state.
1.3.6.1.4.1.7244.2.101.2.8.28.3ScalaragentErrRecoveryUdldCauseModeread-writecurrentEnable/Disable timer to recover from udld error disable state.
1.3.6.1.4.1.7244.2.101.2.8.28.4ScalaragentErrRecoveryPortSecurityCauseModeread-writecurrentEnable/Disable timer to recover from port-security error disable state.
1.3.6.1.4.1.7244.2.101.2.8.28.5ScalaragentErrRecoveryBpduCauseModeread-writecurrentEnable/Disable timer to recover from bpdu error disable state.
1.3.6.1.4.1.7244.2.101.2.8.28.6ScalaragentErrRecoveryLinkFlapCauseModeread-writecurrentEnable/Disable timer to recover from link flap error disable state.
1.3.6.1.4.1.7244.2.101.2.8.28.7ScalaragentErrRecoveryMacFlapCauseModeread-writecurrentEnable/Disable timer to recover from MAC flap error disable state.
1.3.6.1.4.1.7244.2.101.2.8.28.8ScalaragentErrDetectLinkFlapCauseModeread-writecurrentEnable/Disable error disable detection for link flapping state.
1.3.6.1.4.1.7244.2.101.2.8.28.9ScalaragentErrDetectMacFlapCauseModeread-writecurrentEnable/Disable error disable detection for MAC flapping state.
1.3.6.1.4.1.7244.2.101.2.9NodeagentTransferConfigGroupExtension
1.3.6.1.4.1.7244.2.101.2.9.3NodeagentTransferCopyGroup
1.3.6.1.4.1.7244.2.101.2.9.3.1ScalaragentTransferCopyRunningConfigToSwitchDestFilenameread-writecurrentThe filename used to store current running config in the switch. It can be up to 30 alphanumeric characters.
1.3.6.1.4.1.7244.2.101.2.9.3.2ScalaragentTransferCopyRunningConfigStartread-writecurrentCopy running configure to switch, the filename is specified in agentTransferCopyRunningConfigToSwitchDestFilename.
1.3.6.1.4.1.7244.2.101.2.9.3.3ScalaragentTransferCopyRunningConfigStatusread-onlycurrentIndicates the current status of a copy running configure operation.
1.3.6.1.4.1.7244.2.101.2.9.4NodeagentTransferDeleteGroup
1.3.6.1.4.1.7244.2.101.2.9.4.1ScalaragentTransferDeleteSwitchFilenameread-writecurrentThe filename of the file to be deleted from the switch. It can be up to 32 alphanumeric characters.
1.3.6.1.4.1.7244.2.101.2.9.4.2ScalaragentTransferDeleteStartread-writecurrentstart deleting file; the filename is specified in agentTransferDeleteSwitchFilename.
1.3.6.1.4.1.7244.2.101.2.9.4.3ScalaragentTransferDeleteStatusread-onlycurrentIndicates the current status of the deleting operation.
1.3.6.1.4.1.7244.2.101.2.13TableagentPortConfigExtensionTablenot-accessiblecurrentThe switch's port capability table
1.3.6.1.4.1.7244.2.101.2.13.1RowagentPortConfigExtensionEntrynot-accessiblecurrentport capability setting for a specific port.
1.3.6.1.4.1.7244.2.101.2.13.1.1ColumnagentPortConfigExtensionIfIndexread-onlycurrentport index used to uniquelly identify an entry of the port capability Table
1.3.6.1.4.1.7244.2.101.2.13.1.6ColumnagentPortConfigExtensionAdminModeread-writecurrentThe switch's Port Admin Mode
1.3.6.1.4.1.7244.2.101.2.13.1.9ColumnagentPortConfigExtensionLinkTrapModeread-writecurrentIf enabled, link up and link down traps will be sent for this port.
1.3.6.1.4.1.7244.2.101.2.13.1.10ColumnagentPortConfigExtensionClearStatsread-writecurrentclear stats for this port only
1.3.6.1.4.1.7244.2.101.2.13.1.18ColumnagentPortConfigExtensionMaxFrameSizeLimitread-onlycurrentThis object identifies the largest value that can be configured for agentPortConfigExtensionMaxFrameSize
1.3.6.1.4.1.7244.2.101.2.13.1.19ColumnagentPortConfigExtensionMaxFrameSizeread-writecurrentThis object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agent…
1.3.6.1.4.1.7244.2.101.15NodeagentLinkStateConfigGroup
1.3.6.1.4.1.7244.2.101.15.1ScalaragentLinkStateConfigAdminModeread-writecurrentThe administration mode of the Link state.
1.3.6.1.4.1.7244.2.101.15.2TableagentLinkStateGroupTablenot-accessiblecurrentThis table includes entries for the status of all currently configured Link state group.
1.3.6.1.4.1.7244.2.101.15.2.1RowagentLinkStateGroupEntrynot-accessiblecurrentThis table includes entries for the status of all currently configured Link state group.
1.3.6.1.4.1.7244.2.101.15.2.1.1ColumnagentLinkStateGroupIdread-onlycurrentThe id of the Link State group.
1.3.6.1.4.1.7244.2.101.15.2.1.2ColumnagentLinkStateGroupModeread-writecurrentThe mode of this Link State group.
1.3.6.1.4.1.7244.2.101.15.2.1.3ColumnagentLinkStateGroupUpstreamPortread-writecurrentThe up stream port of the Link State group.
1.3.6.1.4.1.7244.2.101.15.2.1.4ColumnagentLinkStateGroupDownstreamPortread-writecurrentThe down stream port of the Link State group.
1.3.6.1.4.1.7244.2.101.15.2.1.5ColumnagentLinkStateGroupStatusread-createcurrentThe status of Link State group. active(1) - This group setting is active. createAndGo(4) - Set to this value to create a new group. destroy(6) - Set to this va…
1.3.6.1.4.1.7244.2.101.16NodeagentPortBackupConfigGroup
1.3.6.1.4.1.7244.2.101.16.1ScalaragentPortBackupConfigAdminModeread-writecurrentThe administration mode of the Port-backup.
1.3.6.1.4.1.7244.2.101.16.2TableagentPortBackupGroupTablenot-accessiblecurrentThis table includes entries for the status of all currently configured Port-backup group.
1.3.6.1.4.1.7244.2.101.16.2.1RowagentPortBackupGroupEntrynot-accessiblecurrentThis table includes entries for the status of all currently configured Port-backup group.
1.3.6.1.4.1.7244.2.101.16.2.1.1ColumnagentPortBackupGroupIdread-onlycurrentThe id of the Port-backup group.
1.3.6.1.4.1.7244.2.101.16.2.1.2ColumnagentPortBackupGroupModeread-writecurrentThe mode of this Port-backup group.
1.3.6.1.4.1.7244.2.101.16.2.1.3ColumnagentPortBackupGroupActivePortread-writecurrentThe active port of the Port-backup group.
1.3.6.1.4.1.7244.2.101.16.2.1.4ColumnagentPortBackupGroupBackupPortread-writecurrentThe backup port of the Port-backup group.
1.3.6.1.4.1.7244.2.101.16.2.1.5ColumnagentMacMoveUpdatetModeread-writecurrentThe mode of MAC Address-Table Move Update.
1.3.6.1.4.1.7244.2.101.16.2.1.6ColumnagentPortBackupGroupStatusread-createcurrentThe status of Port-backup group. active(1) - This group setting is active. createAndGo(4) - Set to this value to create a new group. destroy(6) - Set to this v…
1.3.6.1.4.1.7244.2.101.16.2.1.7ColumnagentPortBackupGroupFailBackTimeread-writecurrentThe value of the Port-backup fail back time.
1.3.6.1.4.1.7244.2.101.100NodeagentDOMGroup
1.3.6.1.4.1.7244.2.101.100.1ScalaragentDOMAdminModeread-writecurrentEnable or disable the DOM feature. The default mode is disabled.
1.3.6.1.4.1.7244.2.101.100.2ScalaragentDOMIntervalread-writecurrentConfigure the interval of Digital Optical Monitor.
1.3.6.1.4.1.7244.2.101.103NodeagentSwitchCurrBootFilesGroupExtension
1.3.6.1.4.1.7244.2.101.103.1ScalaragentSwitchCurrBootRomFileNameread-writecurrentCurrent BootRom Filename. This is shown on vxWorks plateforms.
1.3.6.1.4.1.7244.2.101.103.3ScalaragentSwitchCurrBootLoaderFileNameread-onlycurrentCurrent Boot Loader Filename. This is shown on vxWorks plateforms.
1.3.6.1.4.1.7244.2.101.103.5ScalaragentSwitchCurrBootConfigFileNameread-writecurrentCurrent configuration Filename
1.3.6.1.4.1.7244.2.101.103.7ScalaragentSwitchCurrBootOpCodeFileNameread-writecurrentCurrent Operation Code Filename
1.3.6.1.4.1.7244.2.101.103.9ScalaragentSwitchCurrUBootFileNameread-onlycurrentCurrent UBoot Filename. This is shown on linux plateforms.
1.3.6.1.4.1.7244.2.101.103.11ScalaragentSwitchCurrKernelFileNameread-onlycurrentCurrent Kernel Filename. This is shown on linux plateforms.
1.3.6.1.4.1.7244.2.101.103.12ScalaragentSwitchCurrVMTracerFileNameread-onlycurrentCurrent VMTracer image Filename. This is shown on vmtracer supported L3 linux plateforms.
1.3.6.1.4.1.7244.2.101.110NodeagentCDPConfigGroup
1.3.6.1.4.1.7244.2.101.110.1ScalaragentCDPConfigAdminModeread-writecurrentenable/disable CDP (Cisco Discovery Protocol)
1.3.6.1.4.1.7244.2.101.110.2ScalaragentCDPConfigTimeToLiveread-writecurrentThe time that CDP information will be kept in other CDP-aware switch. The range is 10 to 255.
1.3.6.1.4.1.7244.2.101.110.3ScalaragentCDPConfigTransmitIntervalread-writecurrentThe time interval that the CDP information is sent. The range is 5 to 254.
1.3.6.1.4.1.7244.2.101.110.4ScalaragentCDPConfigNumInPktsread-onlycurrentThe number of CDP packets received.
1.3.6.1.4.1.7244.2.101.110.5ScalaragentCDPConfigNumOutPktsread-onlycurrentThe number of CDP packets sent out.
1.3.6.1.4.1.7244.2.101.110.6ScalaragentCDPConfigNumErrPktsread-onlycurrentThe number of error CDP packets received/sent.
1.3.6.1.4.1.7244.2.101.110.7ScalaragentCDPConfigResetNumPktsread-writecurrentreset CDP in/out/err packet counters
1.3.6.1.4.1.7244.2.101.110.8ScalaragentCDPConfigResetDeviceInformationread-writecurrentclear CDP neighbor information
1.3.6.1.4.1.7244.2.101.110.10TableagentCDPConfigPortModeTablenot-accessiblecurrentThe switch CDP administration table
1.3.6.1.4.1.7244.2.101.110.10.1RowagentCDPConfigPortModeEntrynot-accessiblecurrentCDP administration setting for a specific port.
1.3.6.1.4.1.7244.2.101.110.10.1.1ColumnagentCDPConfigPortModeIfIndexread-onlycurrentport index used to uniquelly identify an entry of the CDP administration Table
1.3.6.1.4.1.7244.2.101.110.10.1.2ColumnagentCDPConfigPortModeAdminModeread-writecurrentCDP administration for every individual port.
1.3.6.1.4.1.7244.2.101.110.20TableagentCDPConfigNeighborInfoTablenot-accessiblecurrentThe switch CDP neighbor information table
1.3.6.1.4.1.7244.2.101.110.20.1RowagentCDPConfigNeighborInfoEntrynot-accessiblecurrentCDP neighbor information.
1.3.6.1.4.1.7244.2.101.110.20.1.1ColumnagentCDPConfigNeighborInfoIndexread-onlycurrentindex used to uniquelly identify an entry of the CDP neighbor information Table
1.3.6.1.4.1.7244.2.101.110.20.1.2ColumnagentCDPConfigNeighborInfoDeviceIDread-onlycurrentneighbor CDP device ID.
1.3.6.1.4.1.7244.2.101.110.20.1.3ColumnagentCDPConfigNeighborInfoLocalIFread-onlycurrentLocal IF number from which the CDP packets are received.
1.3.6.1.4.1.7244.2.101.110.20.1.4ColumnagentCDPConfigNeighborInfoHoldTimeread-onlycurrentCDP packets' time to live.
1.3.6.1.4.1.7244.2.101.110.20.1.5ColumnagentCDPConfigNeighborInfoCapabilityread-onlycurrentneighborhood's capabilities.
1.3.6.1.4.1.7244.2.101.110.20.1.6ColumnagentCDPConfigNeighborInfoPlatformread-onlycurrentneighborhood's platform.
1.3.6.1.4.1.7244.2.101.110.20.1.7ColumnagentCDPConfigNeighborInfoPortIDread-onlycurrentneighborhood's port ID from which the CDP packets are sent out.
1.3.6.1.4.1.7244.2.101.110.20.1.8ColumnagentCDPConfigNeighborInfoManagementAddressread-onlycurrentneighborhood's management address from which the CDP packets are sent out.
1.3.6.1.4.1.7244.2.101.111NodeagentVlanVoiceConfigGroup
1.3.6.1.4.1.7244.2.101.111.1ScalaragentVlanVoiceVlanIDCreateread-writecurrentThe Voice Vlan Vlan Id.
1.3.6.1.4.1.7244.2.101.111.2ScalaragentVlanVoiceAdminModeread-writecurrentThe Voice Vlan administration.
1.3.6.1.4.1.7244.2.101.111.3ScalaragentVlanVoiceMacAddressread-writecurrentThe Voice Vlan MAC address. Multicast mac address is not allowed.
1.3.6.1.4.1.7244.2.101.111.4ScalaragentVlanVoiceMacMaskread-writecurrentThe Voice Vlan MAC mask.
1.3.6.1.4.1.7244.2.101.111.5ScalaragentVlanVoicePriorityread-writecurrentThe Voice Vlan priority.
1.3.6.1.4.1.7244.2.101.111.6ScalaragentVlanVoiceNameread-writecurrentThe Voice Vlan name.
1.3.6.1.4.1.7244.2.101.111.7TableagentVlanVoiceConfigTablenot-accessiblecurrentThe switch Voice Vlan show table.
1.3.6.1.4.1.7244.2.101.111.7.1RowagentVlanVoiceConfigEntrynot-accessiblecurrentThe switch Voice Vlan show entry.
1.3.6.1.4.1.7244.2.101.111.7.1.1ColumnagentVlanVoiceConfigIndexread-onlycurrentVoice Vlan Index.
1.3.6.1.4.1.7244.2.101.111.7.1.2ColumnagentVlanVoiceConfigNameread-onlycurrentThe Voice Vlan name.
1.3.6.1.4.1.7244.2.101.111.7.1.3ColumnagentVlanVoiceConfigMacAddressread-onlycurrentThe Voice Vlan MAC address.
1.3.6.1.4.1.7244.2.101.111.7.1.4ColumnagentVlanVoiceConfigMacMaskread-onlycurrentThe Voice Vlan MAC mask.
1.3.6.1.4.1.7244.2.101.111.7.1.5ColumnagentVlanVoiceConfigPriorityread-onlycurrentThe Voice Vlan priority.
1.3.6.1.4.1.7244.2.101.111.7.1.6ColumnagentVlanVoiceConfigDeleteread-writecurrentRemove Voice Vlan entry.
1.3.6.1.4.1.7244.2.101.114NodeagentVoiceVlanConfigGroup
1.3.6.1.4.1.7244.2.101.114.1ScalaragentVoiceVlanAdminModeread-writecurrentThe Voice Vlan administration Mode. The default mode is disabled.
1.3.6.1.4.1.7244.2.101.114.2TableagentVoiceVlanConfigTablenot-accessiblecurrentThe switch Voice Vlan show table.
1.3.6.1.4.1.7244.2.101.114.2.1RowagentVoiceVlanConfigEntrynot-accessiblecurrentThe switch Voice Vlan show entry.
1.3.6.1.4.1.7244.2.101.114.2.1.1ColumnagentVoiceVlanConfigIndexread-onlycurrentVoice Vlan Index.
1.3.6.1.4.1.7244.2.101.114.2.1.2ColumnagentVoiceVlanConfigIfModeread-writecurrentThe Voice VLAN mode for selected interface.
1.3.6.1.4.1.7244.2.101.114.2.1.3ColumnagentVoiceVlanConfigIfModeValueread-writecurrentThe Voice VLAN mode value of the selected interface.
1.3.6.1.4.1.7244.2.101.114.2.1.4ColumnagentVoiceVlanConfigCosOverrideModeread-writecurrentThe CoS Override mode for selected interface. The default mode is disabled.
1.3.6.1.4.1.7244.2.101.114.2.1.5ColumnagentVoiceVlanConfigOperStateread-onlycurrentThe operational status of the voice vlan of the given interface.
1.3.6.1.4.1.7244.2.101.115NodeagentVTPConfigGroup
1.3.6.1.4.1.7244.2.101.115.1ScalaragentVTPAdminModeread-writecurrentEnable or disable the VTP feature. The default mode is enabled.
1.3.6.1.4.1.7244.2.101.115.2ScalaragentVTPVersionread-onlycurrentThe VTP version.
1.3.6.1.4.1.7244.2.101.115.3ScalaragentVTPConfigRevisionread-onlycurrentThe revision for the VTP domain status.
1.3.6.1.4.1.7244.2.101.115.4ScalaragentVTPMaxVlanNumSupportedread-onlycurrentThe maximum VLANs supported for VTP.
1.3.6.1.4.1.7244.2.101.115.5ScalaragentVTPVlanNumSupportedread-onlycurrentThe VLAN number for VTP currently.
1.3.6.1.4.1.7244.2.101.115.6ScalaragentVTPOperatingModeread-writecurrentThe operational mode of VTP device. The default setting is server mode.
1.3.6.1.4.1.7244.2.101.115.7ScalaragentVTPDomainNameread-writecurrentThe name of the VTP administrative domain.
1.3.6.1.4.1.7244.2.101.115.8ScalaragentVTPPruningModeread-writecurrentEnable or disable the VTP pruning mode.
1.3.6.1.4.1.7244.2.101.115.9ScalaragentVTPDomainPasswordread-writecurrentThe the password for the VTP administrative domain.
1.3.6.1.4.1.7244.2.101.115.10ScalaragentVTPV2Moderead-writecurrentEnable or disable the VTP V2 mode.
1.3.6.1.4.1.7244.2.101.115.11ScalaragentVTPMD5Digestread-onlycurrentThe MD5 Digest for the VTP domain status.
1.3.6.1.4.1.7244.2.101.115.12ScalaragentVTPConfigLastModifiedread-onlycurrentThe timestamp of the last configuration modification and the IP address of the switch that caused the configuration change to the database.
1.3.6.1.4.1.7244.2.101.115.13ScalaragentVTPLocalUpdaterIDread-onlycurrentThe local updater ID for the VTP domain status.
1.3.6.1.4.1.7244.2.101.115.14TableagentVTPPortConfigTablenot-accessiblecurrentThe VTP Trunk status show table.
1.3.6.1.4.1.7244.2.101.115.14.1RowagentVTPPortConfigEntrynot-accessiblecurrentThe switch Voice Vlan show entry.
1.3.6.1.4.1.7244.2.101.115.14.1.1ColumnagentVTPPortConfigIndexnot-accessiblecurrentVTP Trunkport Index.
1.3.6.1.4.1.7244.2.101.115.14.1.2ColumnagentVTPPortConfigTrunkModeread-writecurrentThe VTP Trunk mode for selected interface.
1.3.6.1.4.1.7244.2.101.116NodeagentFIPSnoopingGroup
1.3.6.1.4.1.7244.2.101.116.1ScalaragentFIPSnoopingAdminModeread-writecurrentEnable or disable the FIPSnooping feature. The default mode is disable.
1.3.6.1.4.1.7244.2.101.116.2TableagentFIPSnoopingVlanConfigTablenot-accessiblecurrentA table of the FIP Snooping Vlan configuration entries.
1.3.6.1.4.1.7244.2.101.116.2.1RowagentFIPSnoopingVlanConfigEntrynot-accessiblecurrentRepresents entry for a FIP Snooping configurable Vlan.
1.3.6.1.4.1.7244.2.101.116.2.1.1ColumnagentFIPSnoopingVlanIndexread-onlycurrentVlanIndex values in the vlans.
1.3.6.1.4.1.7244.2.101.116.2.1.2ColumnagentFIPSnoopingVlanAdminModeread-writecurrentThis enables or disables FIP Snooping on a selected Vlan interface.
1.3.6.1.4.1.7244.2.101.116.5TableagentFIPSnoopingSessionTablenot-accessiblecurrentA table that contains the objects for the with each port.
1.3.6.1.4.1.7244.2.101.116.5.1RowagentFIPSnoopingSessionEntrynot-accessiblecurrentThe information for FIP Snooping sessions.
1.3.6.1.4.1.7244.2.101.116.5.1.1ColumnagentFIPSnoopingSessionKeyread-onlycurrentThe FIP Snooping Session Key.
1.3.6.1.4.1.7244.2.101.116.5.1.2ColumnagentFIPSnoopingSessionIfIndexread-onlycurrentName of the interface which is connected.
1.3.6.1.4.1.7244.2.101.116.5.1.3ColumnagentFIPSnoopingSessionFCFMacAddressread-onlycurrentThe FCF MAC address of the session.
1.3.6.1.4.1.7244.2.101.116.5.1.4ColumnagentFIPSnoopingSessionENodeMacAddressread-onlycurrentThe ENode MAC address of the session.
1.3.6.1.4.1.7244.2.101.116.5.1.5ColumnagentFIPSnoopingSessionENodeIfIndexread-onlycurrentThe ENode interface of the session.
1.3.6.1.4.1.7244.2.101.116.6TableagentFIPSnoopingFCFTablenot-accessiblecurrentA table that contains the objects for the with each port.
1.3.6.1.4.1.7244.2.101.116.6.1RowagentFIPSnoopingFCFEntrynot-accessiblecurrentThe information for FIP Snooping FCF.
1.3.6.1.4.1.7244.2.101.116.6.1.1ColumnagentFIPSnoopingFCFKeyread-onlycurrentThe FIP Snooping FCF Key.
1.3.6.1.4.1.7244.2.101.116.6.1.2ColumnagentFIPSnoopingFCFIfIndexread-onlycurrentName of the interface to which the FCoE Forwarder (FCF) is connected.
1.3.6.1.4.1.7244.2.101.116.6.1.3ColumnagentFIPSnoopingFCFVlanread-onlycurrentVlan Index for which this entry is associated with.
1.3.6.1.4.1.7244.2.101.116.6.1.4ColumnagentFIPSnoopingFCFENodeNumberread-onlycurrentTotal number of ENodes that are connected to the FCF
1.3.6.1.4.1.7244.2.101.116.6.1.5ColumnagentFIPSnoopingFCFFCMapread-onlycurrentFC-Map value used by the FCF. The default value is 0xEFC00.
1.3.6.1.4.1.7244.2.101.116.6.1.6ColumnagentFIPSnoopingFCFSwitchNameread-onlycurrentName ID
1.3.6.1.4.1.7244.2.101.116.6.1.7ColumnagentFIPSnoopingFCFFabricNameread-onlycurrentName of the FCF.
1.3.6.1.4.1.7244.2.101.116.7TableagentFIPSnoopingENodeTablenot-accessiblecurrentA table that contains the objects for the with each port.
1.3.6.1.4.1.7244.2.101.116.7.1RowagentFIPSnoopingENodeEntrynot-accessiblecurrentThe information for FIP Snooping ENode.
1.3.6.1.4.1.7244.2.101.116.7.1.1ColumnagentFIPSnoopingENodeKeyread-onlycurrentThe FIP Snooping ENode Key.
1.3.6.1.4.1.7244.2.101.116.7.1.2ColumnagentFIPSnoopingENodeIfIndexread-onlycurrentThe interface of enode.
1.3.6.1.4.1.7244.2.101.116.7.1.3ColumnagentFIPSnoopingENodeVlanread-onlycurrentVlan Index for which this entry is associated with.
1.3.6.1.4.1.7244.2.101.116.7.1.4ColumnagentFIPSnoopingENodeNameIDread-onlycurrentName ID
1.3.6.1.4.1.7244.2.101.117NodeagentMLAGGroup
1.3.6.1.4.1.7244.2.101.117.1ScalaragentMLAGAdminModeread-writecurrentEnable or disable the MLAG feature. The default mode is disabled.
1.3.6.1.4.1.7244.2.101.117.2ScalaragentMLAGDomainIdread-writecurrentConfigure the domain Id of Multi-Chassis Link Aggregation.
1.3.6.1.4.1.7244.2.101.117.3ScalaragentMLAGConfigurationConsistancyStatusread-onlycurrentCheck the switch configuration for consistency parameter.
1.3.6.1.4.1.7244.2.101.117.4ScalaragentMLAGMemberCountread-onlycurrentGet the number of MLAG members.
1.3.6.1.4.1.7244.2.101.117.5ScalaragentMLAGSystemMacread-writecurrentSet the system mac of Multi-Chassis Link Aggregation.
1.3.6.1.4.1.7244.2.101.117.6ScalaragentMLAGKeepaliveTimeoutread-writecurrentTo specify the timeout (in seconds) between re-transmissions to the MLAG peer device. The range is from 3 to 20. The default is 5.
1.3.6.1.4.1.7244.2.101.117.7ScalaragentMLAGPeerGatewayModeread-writecurrentEnable or disable Layer 3 forwarding for packets destined to the gateway MAC address of the MLAG. The default mode is enabled.
1.3.6.1.4.1.7244.2.101.117.8ScalaragentMLAGDelayRestoreread-writecurrentTo delay the MLAG from coming up on the restored MLAG peer device after a reload when the peer adjacency is already established. The default value is 0, it mea…
1.3.6.1.4.1.7244.2.101.117.9ScalaragentMLAGMemberLinkdownModeread-writecurrentEnable or disable member port link down mode when MLAG is starting or stopping. The default mode is disabled.
1.3.6.1.4.1.7244.2.101.117.10NodeagentMLAGPeerLinkGroup
1.3.6.1.4.1.7244.2.101.117.10.1ScalaragentMLAGPeerLinkifIndexread-writecurrentUse this to set MLAG peer link interface. Set 0 to disable MLAG peer link.
1.3.6.1.4.1.7244.2.101.117.10.2ScalaragentMLAGPeerLinkifStatusread-onlycurrentShow MLAG peer link interface status.
1.3.6.1.4.1.7244.2.101.117.10.3ScalaragentMLAGPeerLinkActiveVlansread-onlycurrentShow MLAG peer link interface active vlans.
1.3.6.1.4.1.7244.2.101.117.10.4ScalaragentMLAGPeerLinkForbiddenVlansread-onlycurrentShow MLAG peer link interface forbidden vlans.
1.3.6.1.4.1.7244.2.101.117.11TableagentMLAGPortChannelTablenot-accessiblecurrentTable of Multi-Chassis Link Aggregation port channel status for the specified interface.
1.3.6.1.4.1.7244.2.101.117.11.1RowagentMLAGPortChannelEntrynot-accessiblecurrentTable of Multi-Chassis Link Aggregation port channel status for the specified interface.
1.3.6.1.4.1.7244.2.101.117.11.1.1ColumnagentMLAGPortChannelifIndexread-onlycurrentThis is a unique index for an entry in the agentMLAGPortChannelTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTab…
1.3.6.1.4.1.7244.2.101.117.11.1.2ColumnagentMLAGPortChannelIdread-createcurrentIdentity of MLAG port channel number. Zero to disable MLAG mode.
1.3.6.1.4.1.7244.2.101.117.11.1.3ColumnagentMLAGPortChannelifIndexStatusread-onlycurrentInterface status of MLAG port channel number.
1.3.6.1.4.1.7244.2.101.117.11.1.4ColumnagentMLAGPortChannelConsistancyread-onlycurrentConfiguration consistancy of MLAG port channel number.
1.3.6.1.4.1.7244.2.101.117.11.1.5ColumnagentMLAGPortChannelActiveVlansread-onlycurrentActive vlans of MLAG port channel number.
1.3.6.1.4.1.7244.2.101.117.12TableagentMLAGVlanRoutingPortTablenot-accessiblecurrentTable of Multi-Chassis Link Aggregation Forbidden Configuration for the specified vlan routing interface.
1.3.6.1.4.1.7244.2.101.117.12.1RowagentMLAGVlanRoutingPortEntrynot-accessiblecurrentTable of Multi-Chassis Link Aggregation Forbidden Configuration for the specified vlan routing interface.
1.3.6.1.4.1.7244.2.101.117.12.1.1ColumnagentMLAGVlanRoutingPortifIndexread-onlycurrentThis is a unique index for an entry in the agentMLAGVlanRoutingPortTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the i…
1.3.6.1.4.1.7244.2.101.117.12.1.2ColumnagentMLAGVlanRoutingPortForbiddenModeread-writecurrentEnable or disable forbidden mode of VLAN on peer link interface. The default mode is disabled.
1.3.6.1.4.1.7244.2.101.118NodeagentDCBXGroup
1.3.6.1.4.1.7244.2.101.118.1TableagentDCBXConfigTablenot-accessiblecurrentTable of Data center bridging exchange configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.118.1.1RowagentDCBXConfigEntrynot-accessiblecurrentTable of Data center bridging exchange configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.118.1.1.1ColumnagentDCBXifIndexread-onlycurrentThis is a unique index for an entry in the agentDCBXPFCConfigTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable.
1.3.6.1.4.1.7244.2.101.118.1.1.2ColumnagentDCBXAdminModeread-writecurrentEnable/Disable DCBX for the specified interface.
1.3.6.1.4.1.7244.2.101.118.1.1.3ColumnagentDCBXVersionread-writecurrentConfigure DCBX version for the specified interface.
1.3.6.1.4.1.7244.2.101.118.2TableagentDCBXPFCConfigTablenot-accessiblecurrentTable of Data center bridging exchange configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.118.2.1RowagentDCBXPFCConfigEntrynot-accessiblecurrentTable of Data center bridging exchange configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.118.2.1.1ColumnagentDCBXPFCEnableModeread-onlycurrentShow the enable mode setting for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.2ColumnagentDCBXPFCAdvertiseModeread-onlycurrentConfigure advertise mode setting for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.3ColumnagentDCBXPFCWillingModeread-writecurrentConfigure willing mode setting for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.4ColumnagentDCBXPFCPriorityMaskread-onlycurrentShow the priority mask for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.5ColumnagentDCBXPFCMaxTrafficClassread-onlycurrentShow the max traffic class for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.6ColumnagentDCBXPFCOperVersionread-onlycurrentShow the version for Operational DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.7ColumnagentDCBXPFCOperMaxVersionread-onlycurrentShow the max version for Operational DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.8ColumnagentDCBXPFCOperErrorsread-onlycurrentShows error reason for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.9ColumnagentDCBXPFCOperModeread-onlycurrentShow the operational mode for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.10ColumnagentDCBXPFCOperPeerSyncdread-onlycurrentShow feature sync for Operational DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.11ColumnagentDCBXPFCOperPriorityMaskread-onlycurrentShow the priority mask for Operational DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.12ColumnagentDCBXPFCOperMaxTrafficClassread-onlycurrentShow the max traffic class for Operational DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.13ColumnagentDCBXPFCPeerLocalifIndexread-onlycurrentShow the local interface for Peer DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.14ColumnagentDCBXPFCPeerStatusread-onlycurrentShow the status for Peer DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.15ColumnagentDCBXPFCPeerEnableModeread-onlycurrentShow administrative mode setting for Peer DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.16ColumnagentDCBXPFCPeerWillingModeread-onlycurrentShow willing mode setting for Peer DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.17ColumnagentDCBXPFCPeerPriorityMaskread-onlycurrentShow priority mask for Peer DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.18ColumnagentDCBXPFCPeerMaxTrafficClassread-onlycurrentShow the max traffic class for Peer DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.2.1.19ColumnagentDCBXPFCDCBXOperVersionread-onlycurrentShow the operational version for DCBX PFC feature.
1.3.6.1.4.1.7244.2.101.118.3TableagentDCBXPgConfigTablenot-accessiblecurrentTable of Data center bridging exchange Priority Group feature configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.118.3.1RowagentDCBXPgConfigEntrynot-accessiblecurrentTable of Data center bridging exchange Priority Group feature configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.118.3.1.1ColumnagentDCBXPgEnableModeread-onlycurrentShow enable mode setting for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.2ColumnagentDCBXPgAdvertiseModeread-onlycurrentEnable/Disable advertise mode setting for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.3ColumnagentDCBXPgWillingModeread-writecurrentEnable/Disable willing mode setting for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.4ColumnagentDCBXPgGroupBandwidthread-onlycurrentShow a 8 byte array which will be filled with bandwidth of 8 priority group.
1.3.6.1.4.1.7244.2.101.118.3.1.5ColumnagentDCBXPgPriorityGroupIdread-onlycurrentShow priority map for Peer DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.6ColumnagentDCBXPgMaxTrafficClassread-onlycurrentShow the max traffic class for Peer DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.7ColumnagentDCBXPgOperVersionread-onlycurrentShow opertional version for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.8ColumnagentDCBXPgMaxVersionread-onlycurrentShow max version for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.9ColumnagentDCBXPgErrorReasonread-onlycurrentShow error reason for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.10ColumnagentDCBXPgIsOperationalread-onlycurrentShow the operational mode of the PG for a interface.
1.3.6.1.4.1.7244.2.101.118.3.1.11ColumnagentDCBXPgSyncedModeread-onlycurrentShow feature sync for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.12ColumnagentDCBXPgOperGroupBandwidthread-onlycurrentShow a 8 byte array which will be filled with bandwidth of 8 priority group.
1.3.6.1.4.1.7244.2.101.118.3.1.13ColumnagentDCBXPgOperPriorityGroupIdread-onlycurrentShow the operational priority map of the PG for a interface.
1.3.6.1.4.1.7244.2.101.118.3.1.14ColumnagentDCBXPgOperMaxTrafficClassread-onlycurrentShow the max traffic class for Operational DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.15ColumnagentDCBXPgPeerStatusread-onlycurrentShow status (Error bit) for Peer DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.16ColumnagentDCBXPgPeerEnableModeread-onlycurrentShow enable mode setting for Peer DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.17ColumnagentDCBXPgPeerWillingModeread-onlycurrentShow willing mode setting for Peer DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.18ColumnagentDCBXPgPeerGroupBandwidthread-onlycurrentShow a 8 byte array which will be filled with bandwidth of 8 priority group.
1.3.6.1.4.1.7244.2.101.118.3.1.19ColumnagentDCBXPgPeerPriorityGroupIdread-onlycurrentShow priority map for Peer DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.20ColumnagentDCBXPgPeerMaxTrafficClassread-onlycurrentShow the max traffic class for Peer DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.118.3.1.21ColumnagentDCBXPgDCBXOperVersionread-onlycurrentShow the operational version for DCBX Priority Group feature.
1.3.6.1.4.1.7244.2.101.119NodeagentEvbGroup
1.3.6.1.4.1.7244.2.101.119.1TableagentEvbConfigTablenot-accessiblecurrentTable of Edge Virtual Bridging feature configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.119.1.1RowagentEvbConfigEntrynot-accessiblecurrentTable of Edge Virtual Bridging feature configurations for the specified interface.
1.3.6.1.4.1.7244.2.101.119.1.1.1ColumnagentEvbifIndexread-onlycurrentShow interface index for Evb feature.
1.3.6.1.4.1.7244.2.101.119.1.1.2ColumnagentEvbAdminModeread-writecurrentEnable/disable mode setting for Evb feature.
1.3.6.1.4.1.7244.2.101.119.1.1.3ColumnagentEvbCapabilityread-onlycurrentConfigure capabilities for Evb feature.
1.3.6.1.4.1.7244.2.101.119.1.1.4ColumnagentEvbForwardingModeread-onlycurrentConfigure forwarding mode for Evb feature.
1.3.6.1.4.1.7244.2.101.119.1.1.5ColumnagentEvbRetransmissionExpread-writecurrentConfigure RTE for Evb feature.
1.3.6.1.4.1.7244.2.101.119.1.1.6ColumnagentEvbOperCapabilityread-onlycurrentShow current capabilities for Evb feature.
1.3.6.1.4.1.7244.2.101.119.1.1.7ColumnagentEvbOperForwardingModeread-onlycurrentShow forwarding mode for Evb feature.
1.3.6.1.4.1.7244.2.101.119.1.1.8ColumnagentEvbOperRetransmissionExpread-onlycurrentShow RTE for Evb feature.
1.3.6.1.4.1.7244.2.101.119.2NodeagentEvbVsiGroup
1.3.6.1.4.1.7244.2.101.119.2.1TableagentEvbVsiTablenot-accessiblecurrentTable of Edge Virtual Bridging VSI feature status for the specified interface.
1.3.6.1.4.1.7244.2.101.119.2.1.1RowagentEvbVsiEntrynot-accessiblecurrentTable of Edge Virtual Bridging VSI feature status for the specified interface.
1.3.6.1.4.1.7244.2.101.119.2.1.1.1ColumnagentEvbVsiInstanceIdread-onlycurrentShow interface instance id for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.1.1.2ColumnagentEvbVsiMgrIdread-onlycurrentShow interface mgr id for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.1.1.3ColumnagentEvbVsiIdread-onlycurrentShow id for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.1.1.4ColumnagentEvbVsiVersionread-onlycurrentShow interface version for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.1.1.5ColumnagentEvbVsiModeread-onlycurrentShow interface mode for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.1.1.6ColumnagentEvbVsiStateread-onlycurrentShow interface state for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.1.1.7ColumnagentEvbVsiNumMacsread-onlycurrentShow interface number of Macs for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.2TableagentEvbVsiMacTablenot-accessiblecurrentTable of Edge Virtual Bridging VSI Mac feature status for the specified interface.
1.3.6.1.4.1.7244.2.101.119.2.2.1RowagentEvbVsiMacEntrynot-accessiblecurrentTable of Edge Virtual Bridging VSI Mac feature status for the specified interface.
1.3.6.1.4.1.7244.2.101.119.2.2.1.1ColumnagentEvbVsiMacAddressread-onlycurrentShow interface MacAddress for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.119.2.2.1.2ColumnagentEvbVsiVlanIdread-onlycurrentShow interface VlanId for Evb Vsi feature.
1.3.6.1.4.1.7244.2.101.120NodeagentVMTracerGroup
1.3.6.1.4.1.7244.2.101.120.1TableagentVMTracerIfCtlTablenot-accessiblecurrentTable of VM Tracer feature status for the specified interface.
1.3.6.1.4.1.7244.2.101.120.1.1RowagentVMTracerIfCtlEntrynot-accessiblecurrentTable of VM Tracer feature status for the specified interface.
1.3.6.1.4.1.7244.2.101.120.1.1.1ColumnagentVMTracerIfIndexread-onlycurrentShow interface index for VM Tracer feature.
1.3.6.1.4.1.7244.2.101.120.1.1.2ColumnagentVMTracerAdminModeread-writecurrentEnable/Disable VM Tracer mode for specified interface.
1.3.6.1.4.1.7244.2.101.120.2TableagentVMTracerSessionTablenot-accessiblecurrentTable of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1RowagentVMTracerSessionEntrynot-accessiblecurrentTable of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.1ColumnagentVMTracerSessionIndexread-onlycurrentIndex of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.2ColumnagentVMTracerSessionNameread-writecurrentName of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.3ColumnagentVMTracerSessionUrlread-writecurrentUrl of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.4ColumnagentVMTracerSessionUsernameread-writecurrentUsername of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.5ColumnagentVMTracerSessionPasswordread-writecurrentPassword of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.6ColumnagentVMTracerSessionAutoVlanModeread-writecurrentAutoVlan mode of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.7ColumnagentVMTracerSessionAllowVlanread-writecurrentAllow vlan range of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.8ColumnagentVMTracerSessionConnectionStatusread-onlycurrentConnection status of VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.2.1.9ColumnagentVMTracerSessionClearread-writecurrentClear current VM Tracer feature session.
1.3.6.1.4.1.7244.2.101.120.3TableagentVMTracerVMTablenot-accessiblecurrentTable of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1RowagentVMTracerVMEntrynot-accessiblecurrentTable of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.1ColumnagentVMTracerVMIndexread-onlycurrentIndex of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.2ColumnagentVMTracerVMNameread-onlycurrentName of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.3ColumnagentVMTracerVMInterfaceread-onlycurrentInterface of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.4ColumnagentVMTracerVMAdapterread-onlycurrentAdapter of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.5ColumnagentVMTracerVMMacAddressread-onlycurrentMacAddress of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.6ColumnagentVMTracerVMPortGroupread-onlycurrentPortGroup of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.7ColumnagentVMTracerVMVlanIdread-onlycurrentVlanId of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.8ColumnagentVMTracerVMSwitchread-onlycurrentSwitch of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.9ColumnagentVMTracerVMHostread-onlycurrentHost of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.10ColumnagentVMTracerVMHostCpuSpeedread-onlycurrentHost Cpu Speed of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.11ColumnagentVMTracerVMHostMemoryread-onlycurrentHost Memory of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.12ColumnagentVMTracerVMHostSystemread-onlycurrentHost System of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.13ColumnagentVMTracerVMHostVendorread-onlycurrentHost Vendor of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.14ColumnagentVMTracerVMHostCpuCoresread-onlycurrentHost Cpu Cores of VM Tracer feature vm.
1.3.6.1.4.1.7244.2.101.120.3.1.15ColumnagentVMTracerVMHostCpuPackagesread-onlycurrentHost Cpu Packages of VM Tracer feature vm.
Type Definitions
NameSyntaxStatusDescription
BridgeEvbTLVTCBITS { vdpCapable (0), ecpCapable (1), ecpRTE (2), vdpTimerCapable (3), reflectiveRelayCap(14), stdForwardingCap (15) }currentEVB TLV structure.
MIB Viewer