SWSYSTEM-MIB
51 objects
The MIB module is for system information. Copyright (c) 2018 Extreme Networks, Inc. All rights reserved.
Imported Objects
| Brocade-TC | SwPortIndex SwSensorIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| SWBASE-MIB | sw |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.0 | IdentityswTrapsV2 | current | The Traps for Extreme's Switch. | |
| 1.3.6.1.4.1.1588.2.1.1.1.0.4 | NotificationswEventTrap | current | This trap is generated when an event whose level at or below swEventTrapLevel occurs. | |
| 1.3.6.1.4.1.1588.2.1.1.1.0.12 | NotificationswStateChangeTrap | current | This trap is sent whenever switch state changes to online/offline | |
| 1.3.6.1.4.1.1588.2.1.1.1.1 | IdentityswSystem | The MIB module is for system information. Copyright (c) 2018 Extreme Networks, Inc. All rights reserved. | ||
| 1.3.6.1.4.1.1588.2.1.1.1.1.1 | ScalarswCurrentDate | read-only | current | The current date information in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.2 | ScalarswBootDate | read-only | current | The date and time when the system last booted, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.3 | ScalarswFWLastUpdated | read-only | current | The information indicates the date when the firmware was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.4 | ScalarswFlashLastUpdated | read-only | current | The information indicates the date when the FLASH was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.5 | ScalarswBootPromLastUpdated | read-only | current | The information indicates the date when the boot PROM was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.6 | ScalarswFirmwareVersion | read-only | current | The current version of the firwmare. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.7 | ScalarswOperStatus | read-only | current | The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external port; o offline(2) means the … |
| 1.3.6.1.4.1.1588.2.1.1.1.1.10 | ScalarswSsn | read-only | current | The soft serial number of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.18 | ScalarswBeaconOperStatus | read-only | current | The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and ri… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.19 | ScalarswBeaconAdmStatus | read-only | current | The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right t… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.20 | ScalarswDiagResult | read-only | current | The result of the power-on startup (POST) diagnostics. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.21 | ScalarswNumSensors | read-only | current | The number of sensors inside the switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22 | TableswSensorTable | not-accessible | current | The table of sensor entries. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 | RowswSensorEntry | not-accessible | current | An entry of the sensor information. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 | ColumnswSensorIndex | read-only | current | This object identifies the sensor. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 | ColumnswSensorType | read-only | current | This object identifies the sensor type. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 | ColumnswSensorStatus | read-only | current | The current status of the sensor. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 | ColumnswSensorValue | read-only | current | The current value (reading) of the sensor. The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability t… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 | ColumnswSensorInfo | read-only | current | Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.24 | ScalarswID | read-only | current | The number of the logical switch (0/1). |
| 1.3.6.1.4.1.1588.2.1.1.1.1.25 | ScalarswEtherIPAddress | read-only | current | The IP Address of the Ethernet interface of this logical switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.26 | ScalarswEtherIPMask | read-only | current | The IP Mask of the Ethernet interface of this logical switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.29 | ScalarswIPv6Address | not-accessible | current | IPV6 address. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.30 | ScalarswIPv6Status | not-accessible | current | The current status of ipv6 address. |
| 1.3.6.1.4.1.1588.2.1.1.1.8 | IdentityswEvent | current | The OID sub-tree for swEvent group. | |
| 1.3.6.1.4.1.1588.2.1.1.1.8.1 | ScalarswEventTrapLevel | read-write | deprecated | swAgtTrapSeverityLevel, in absence of swEventTrapLevel, specifies the Trap Severity Level of each defined trap recipient host. This object specifies the swEven… |
| 1.3.6.1.4.1.1588.2.1.1.1.8.4 | ScalarswEventNumEntries | read-only | current | The number of entries in the Event Table. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5 | TableswEventTable | not-accessible | current | The table of event entries. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 | RowswEventEntry | not-accessible | current | An entry of the event table. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 | ColumnswEventIndex | read-only | current | This object identifies the event entry. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 | ColumnswEventTimeInfo | read-only | current | This object identifies the date and time when this event occurred, in textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 | ColumnswEventLevel | read-only | current | This object identifies the severity level of this event entry. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 | ColumnswEventRepeatCount | read-only | current | This object identifies how many times this particular event has occurred. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 | ColumnswEventDescr | read-only | current | This object identifies the textual description of the event. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.6 | ColumnswEventVfId | read-only | current | This object identifies the Virtual fabric id. |
| 1.3.6.1.4.1.1588.2.1.1.1.26 | IdentityswCpuOrMemoryUsage | current | The OID sub-tree for cpu or mem usage group. | |
| 1.3.6.1.4.1.1588.2.1.1.1.26.1 | ScalarswCpuUsage | read-only | current | System's cpu usage. |
| 1.3.6.1.4.1.1588.2.1.1.1.26.2 | ScalarswCpuNoOfRetries | read-only | current | Number of times system should take cpu utilization sample before sending the CPU utilization trap. |
| 1.3.6.1.4.1.1588.2.1.1.1.26.3 | ScalarswCpuUsageLimit | read-only | current | CPU usage limit |
| 1.3.6.1.4.1.1588.2.1.1.1.26.4 | ScalarswCpuPollingInterval | read-only | current | Time interval between two memory samples. |
| 1.3.6.1.4.1.1588.2.1.1.1.26.5 | ScalarswCpuAction | read-only | current | Specifies the actions to be taken if system resources exceed the specified threshold. |
| 1.3.6.1.4.1.1588.2.1.1.1.26.6 | ScalarswMemUsage | read-only | current | System's memory usage. |
| 1.3.6.1.4.1.1588.2.1.1.1.26.7 | ScalarswMemNoOfRetries | read-only | current | Number of times system should take memory usage sample before sending the memory usage trap. |
| 1.3.6.1.4.1.1588.2.1.1.1.26.8 | ScalarswMemUsageLimit | read-only | current | Memory usage limit |
| 1.3.6.1.4.1.1588.2.1.1.1.26.9 | ScalarswMemPollingInterval | read-only | current | Time interval between two memory samples. |
| 1.3.6.1.4.1.1588.2.1.1.1.26.10 | ScalarswMemAction | read-only | current | Specifies the actions to be taken if system resources exceed the specified threshold. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FcPortFlag | BITS { physical (0), virtual (1) } | current | Represents the port status for a FC Flag. Currently this will indicate if the port is virtual or physical. |