SYMBOL-CC-WS2000-MIB
1436 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | BITS Counter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString PhysAddress TestAndIncr TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.388 | Nodesymbol | |||
| 1.3.6.1.4.1.388.11 | Nodewsd | |||
| 1.3.6.1.4.1.388.11.1 | Nodesysoids | |||
| 1.3.6.1.4.1.388.11.1.1 | Identityws2000 | current | WS2000 with 1 WAN port, 6 LAN ports. | |
| 1.3.6.1.4.1.388.11.2 | Nodews2k | |||
| 1.3.6.1.4.1.388.11.2.1 | Identitymoduleid | |||
| 1.3.6.1.4.1.388.11.2.2 | NodeccAdmin | |||
| 1.3.6.1.4.1.388.11.2.2.1 | NodeccInfo | |||
| 1.3.6.1.4.1.388.11.2.2.1.1 | ScalarccInfoSerialNumber | read-only | current | The serial number of the switch. This value is unique for each instance of the WS2000 switch. |
| 1.3.6.1.4.1.388.11.2.2.1.2 | ScalarccInfoCountrySelection | read-write | current | This value is a two-character representation of the country code. Note: when changing this _CountrySelection, the current channel and power levels are NOT chan… |
| 1.3.6.1.4.1.388.11.2.2.1.3 | NodeccIdentfication | |||
| 1.3.6.1.4.1.388.11.2.2.1.3.1 | ScalarccIdHwVersion | read-only | current | The same text that follows 'HW=' in sysDescr, EXCLUDING the 'HW='. |
| 1.3.6.1.4.1.388.11.2.2.1.3.2 | ScalarccIdFwVersion | read-only | current | The same text that follows 'FW=' in sysDescr, EXCLUDING the 'FW='. (The bootcode version). |
| 1.3.6.1.4.1.388.11.2.2.1.3.3 | ScalarccIdSwVersion | read-only | current | The same text that follows 'SW=' in sysDescr, EXCLUDING the 'SW='. |
| 1.3.6.1.4.1.388.11.2.2.1.3.4 | ScalarccIdMibVersion | read-only | current | The same text that follows 'MIB=' in sysDescr, EXCLUDING the 'MIB='. The MIB version is identified by a two-digit major version number (with a leading zero if … |
| 1.3.6.1.4.1.388.11.2.2.1.3.5 | ScalarccIdCliVersion | read-only | current | The same text that follows 'CLI=' in sysDescr, EXCLUDING the 'CLI='. |
| 1.3.6.1.4.1.388.11.2.2.1.3.6 | ScalarccIdXmlVersion | read-only | current | Version of XML template implemented on this switch. (Much like MIB version - read details there). |
| 1.3.6.1.4.1.388.11.2.2.1.3.7 | ScalarccIdSerialNumber | read-only | current | The serial number of the switch. This value is unique for each instance of a given switch type. |
| 1.3.6.1.4.1.388.11.2.2.1.4 | ScalarccSysDNSRelayMode | read-write | current | Enable/Disable DNS Relay Mode |
| 1.3.6.1.4.1.388.11.2.2.1.5 | ScalarccApSslv2Mode | read-write | current | Enable/Disable SSLV2 Support |
| 1.3.6.1.4.1.388.11.2.2.1.6 | ScalarccApSshv1Mode | read-write | current | Enable/Disable SSHV1 Support |
| 1.3.6.1.4.1.388.11.2.2.1.7 | ScalarccApSslWeakCipherSupport | read-write | current | Enable/Disable SSL Weak Cipher Support |
| 1.3.6.1.4.1.388.11.2.2.2 | NodeccReset | |||
| 1.3.6.1.4.1.388.11.2.2.2.1 | ScalarccResetFactory | read-write | current | Writing this value causes the switch to reset to factory conditions. NOTHING is retained, NOT the static IP address assignments (if any), NOR any non-factory-d… |
| 1.3.6.1.4.1.388.11.2.2.2.2 | ScalarccResetSwitch | read-write | current | Writing this value causes the switch to reset in the same fashion as a common, (non-factory) reset. |
| 1.3.6.1.4.1.388.11.2.2.2.3 | ScalarccResetMuCounters | read-write | obsolete | Writing this value resets all counters in the ccRf > ccMus sub-tree. Obsolete in WS2000 v1.5 |
| 1.3.6.1.4.1.388.11.2.2.2.4 | ScalarccResetFactoryExceptIpSnmp | read-write | current | Performs a factory reset, EXCEPT that Wan IP and SNMP access settings are retained across the reset. Specifically: Wan Ip + related settings Pppoe settings WS2… |
| 1.3.6.1.4.1.388.11.2.2.2.5 | ScalarccResetStatCounters | read-write | current | Writing this value resets all counters in the ccRf sub-tree except for the ccPortalSystemStatsTable and ccPortalTable |
| 1.3.6.1.4.1.388.11.2.2.3 | NodeccLoadFw | |||
| 1.3.6.1.4.1.388.11.2.2.3.1 | ScalarccLoadFwOperation | read-write | current | Specifies if the firmware is to be loaded to the switch via FTP or TFTP or SFTP or CF Card. |
| 1.3.6.1.4.1.388.11.2.2.3.2 | ScalarccLoadFwInterface | read-write | current | The interface to use in contacting the FTP or TFTP or SFTP server. This is required since the actual firmware load is accomplished via boot code that does not … |
| 1.3.6.1.4.1.388.11.2.2.3.3 | ScalarccLoadFwServerPath | read-write | current | The path to the firmware on the SFTP/TFTP/FTP server. Remember that the type of separator varies depending on the operating system of the server. For Windows, … |
| 1.3.6.1.4.1.388.11.2.2.3.4 | ScalarccLoadFwServerFilename | read-write | current | The name, (on the server), of the firmware file to load. If operation is set to cfFirmwareToSwitch, this variable is the file name on the compact flash card. |
| 1.3.6.1.4.1.388.11.2.2.3.5 | ScalarccLoadFwStart | read-write | current | Set this value to start the firmware load operation. Note that the actual SFTP/TFTP/FTP does not begin immediately, as first the 'operational' firmware shuts-d… |
| 1.3.6.1.4.1.388.11.2.2.3.6 | ScalarccLoadFwResult | read-only | current | This value reflects the result of the most-recent firmware load since reboot, (if any). |
| 1.3.6.1.4.1.388.11.2.2.3.7 | ScalarccLoadFwSuccess | read-only | current | The success/failure status of the most recent firmware load. |
| 1.3.6.1.4.1.388.11.2.2.4 | NodeccLoadCfg | |||
| 1.3.6.1.4.1.388.11.2.2.4.1 | ScalarccLoadCfgOperation | read-write | current | Specifies the type and direction of the transfer to perform involving the configuration file. |
| 1.3.6.1.4.1.388.11.2.2.4.2 | ScalarccLoadCfgServerPath | read-write | current | The path to the firmware on the SFTP/TFTP/FTP server. Remember that the type of separator varies depending on the operating system of the server. For Windows, … |
| 1.3.6.1.4.1.388.11.2.2.4.3 | ScalarccLoadCfgServerFilename | read-write | current | The name, (on the server), of the configuration file to load/store from/to the server. |
| 1.3.6.1.4.1.388.11.2.2.4.4 | ScalarccLoadCfgStart | read-write | current | Set this value to start the configuration file operation. Note that unlike a firmware load, the actual FTP/TFTP/SFTP transfer does begin virtually immediately. |
| 1.3.6.1.4.1.388.11.2.2.4.5 | ScalarccLoadCfgOperationsDone | read-only | current | This value counts the total number of configuration file transfers completed, (whether they succeed or fail). The SNMP manager should save the value of this co… |
| 1.3.6.1.4.1.388.11.2.2.4.6 | ScalarccLoadCfgResult | read-only | current | This value reflects the result of the most-recent configuration file load/store. |
| 1.3.6.1.4.1.388.11.2.2.4.7 | ScalarccLoadCfgSuccess | read-only | current | The success/failure status of the most recent configuration file load/store. |
| 1.3.6.1.4.1.388.11.2.2.5 | NodeccCfgHist | |||
| 1.3.6.1.4.1.388.11.2.2.5.1 | ScalarccCfgHistChangeCount | read-write | current | This value will increment by 1 or more for each config change. It persists across reboots. This variable can only be SET with the same value that it currently … |
| 1.3.6.1.4.1.388.11.2.2.5.2 | ScalarccCfgHistChangeTime | read-only | current | A snapshot of sysUpTime as of the last config change. |
| 1.3.6.1.4.1.388.11.2.2.5.3 | ScalarccCfgHistSemaphore | read-write | current | Can be used to solve the multiple-manager problem. Before performing any SETs, the manager reads this value. As a VAR-BIND of the only/last SET PDU, this value… |
| 1.3.6.1.4.1.388.11.2.2.6 | NodeccLoad | |||
| 1.3.6.1.4.1.388.11.2.2.6.1 | ScalarccLoadServerIpAddr | read-write | current | IP address of the server used for a firmware load, or configuration file load/store operation. |
| 1.3.6.1.4.1.388.11.2.2.6.2 | ScalarccLoadFtpUsername | read-write | current | Username for FTP LoadFw or LoadCfg operations. |
| 1.3.6.1.4.1.388.11.2.2.6.3 | ScalarccLoadFtpPassword | read-write | current | Password for FTP LoadFw or LoadCfg operations. |
| 1.3.6.1.4.1.388.11.2.2.7 | NodeccSnmp | |||
| 1.3.6.1.4.1.388.11.2.2.7.1 | ScalarccSnmpAclViolations | read-only | current | Counts the total number of SNMP requests rejected due to ACL violations since boot. |
| 1.3.6.1.4.1.388.11.2.2.7.2 | ScalarccSnmpLastDeniedIpAddr | read-only | current | The IP address of the last SNMP request to be denied due to ACL violation. |
| 1.3.6.1.4.1.388.11.2.2.7.3 | ScalarccSnmpV3EngineId | read-only | current | SNMPv3 Engine ID |
| 1.3.6.1.4.1.388.11.2.2.7.4 | NodeccSnmpAccess | |||
| 1.3.6.1.4.1.388.11.2.2.7.4.1 | TableccSnmpAccessV12Table | not-accessible | current | Table of SNMP v1/v2 access entries. |
| 1.3.6.1.4.1.388.11.2.2.7.4.1.1 | RowccSnmpAccessV12Entry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.2.7.4.1.1.1 | ColumnccSnmpAccessV12Index | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.2.7.4.1.1.2 | ColumnccSnmpAccessV12Community | read-write | current | Community Name of the SNMP manager. |
| 1.3.6.1.4.1.388.11.2.2.7.4.1.1.3 | ColumnccSnmpAccessV12CustomOid | read-write | current | Starting OID. |
| 1.3.6.1.4.1.388.11.2.2.7.4.1.1.4 | ColumnccSnmpAccessV12OidLimit | read-write | current | OID Limit whether the entire MIB tree or a specific OID set. |
| 1.3.6.1.4.1.388.11.2.2.7.4.1.1.5 | ColumnccSnmpAccessV12Access | read-write | current | Access type whether RO or RW. |
| 1.3.6.1.4.1.388.11.2.2.7.4.1.1.6 | ColumnccSnmpAccessV12Enable | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2 | TableccSnmpAccessV3Table | not-accessible | current | Table of SNMP v3 access entries. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1 | RowccSnmpAccessV3Entry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.1 | ColumnccSnmpAccessV3Index | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.2 | ColumnccSnmpAccessV3User | read-write | current | v3 User Name. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.3 | ColumnccSnmpAccessV3SecurityLevel | read-write | current | Security Level. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.4 | ColumnccSnmpAccessV3CustomOid | read-write | current | Starting OID. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.5 | ColumnccSnmpAccessV3OidLimit | read-write | current | OID Limit whether the entire MIB tree or a specific OID set. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.6 | ColumnccSnmpAccessV3Access | read-write | current | Access type whether RO or RW. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.7 | ColumnccSnmpAccessV3AuthAlgorithm | read-write | current | Authentication Algorithm used. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.8 | ColumnccSnmpAccessV3AuthPassword | read-write | current | Authentication Password. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.9 | ColumnccSnmpAccessV3PrivacyAlgorithm | read-write | current | Privacy Algorithm used. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.10 | ColumnccSnmpAccessV3PrivacyPassword | read-write | current | Privacy Password. |
| 1.3.6.1.4.1.388.11.2.2.7.4.2.1.11 | ColumnccSnmpAccessV3Enable | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.2.7.4.3 | TableccSnmpAccessControlTable | not-accessible | current | Table of SNMP access control entries. |
| 1.3.6.1.4.1.388.11.2.2.7.4.3.1 | RowccSnmpAccessControlEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.2.7.4.3.1.1 | ColumnccSnmpAccessControlIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.2.7.4.3.1.2 | ColumnccSnmpAccessControlStartIp | read-write | current | Starting IP range of the SNMP manager allowed to access the switch. |
| 1.3.6.1.4.1.388.11.2.2.7.4.3.1.3 | ColumnccSnmpAccessControlEndIp | read-write | current | Ending IP range of the SNMP manager allowed to access the switch. |
| 1.3.6.1.4.1.388.11.2.2.7.4.3.1.4 | ColumnccSnmpAccessControlEnable | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.2.7.5 | NodeccSnmpTraps | |||
| 1.3.6.1.4.1.388.11.2.2.7.5.1 | TableccSnmpTrapSinkV12Table | not-accessible | current | Table of SNMP v1/v2 trap configuration entries. |
| 1.3.6.1.4.1.388.11.2.2.7.5.1.1 | RowccSnmpTrapSinkV12Entry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.2.7.5.1.1.1 | ColumnccSnmpTrapSinkV12Index | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.2.7.5.1.1.2 | ColumnccSnmpTrapSinkV12DestinationIp | read-write | current | Destination IP of Trap Manager. |
| 1.3.6.1.4.1.388.11.2.2.7.5.1.1.3 | ColumnccSnmpTrapSinkV12Port | read-write | current | Destination Port of Trap Manager. |
| 1.3.6.1.4.1.388.11.2.2.7.5.1.1.4 | ColumnccSnmpTrapSinkV12Community | read-write | current | Community Name. |
| 1.3.6.1.4.1.388.11.2.2.7.5.1.1.5 | ColumnccSnmpTrapSinkV12Version | read-write | current | SNMP protocol version. |
| 1.3.6.1.4.1.388.11.2.2.7.5.1.1.6 | ColumnccSnmpTrapSinkV12Enable | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2 | TableccSnmpTrapSinkV3Table | not-accessible | current | Table of SNMP v3 trap configuration entries. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1 | RowccSnmpTrapSinkV3Entry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.1 | ColumnccSnmpTrapSinkV3Index | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.2 | ColumnccSnmpTrapSinkV3DestinationIp | read-write | current | Destination IP of Trap Manager. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.3 | ColumnccSnmpTrapSinkV3Port | read-write | current | Destination Port of Trap Manager. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.4 | ColumnccSnmpTrapSinkV3Username | read-write | current | User name of SNMP v3 user. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.5 | ColumnccSnmpTrapSinkV3SecurityLevel | read-write | current | Security Level. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.6 | ColumnccSnmpTrapSinkV3AuthAlgorithm | read-write | current | SNMP v3 Authentication Algorithm. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.7 | ColumnccSnmpTrapSinkV3AuthPassword | read-write | current | SNMP v3 Authentication Password. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.8 | ColumnccSnmpTrapSinkV3PrivacyAlgorithm | read-write | current | SNMP v3 Privacy Algorithm. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.9 | ColumnccSnmpTrapSinkV3PrivacyPassword | read-write | current | SNMP v3 Privacy Password. |
| 1.3.6.1.4.1.388.11.2.2.7.5.2.1.10 | ColumnccSnmpTrapSinkV3Enable | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.2.8 | NodeccCompactFlash | |||
| 1.3.6.1.4.1.388.11.2.2.8.1 | ScalarccCompactFlashCapacity | read-only | current | Capacity of the Compact Flash card in Kbyte. |
| 1.3.6.1.4.1.388.11.2.2.8.2 | ScalarccCompactFlashUsed | read-only | current | Number of Kbyte in use on the Compact Flash card. |
| 1.3.6.1.4.1.388.11.2.2.9 | NodeccSumStats | |||
| 1.3.6.1.4.1.388.11.2.2.9.1 | ScalarccSumStatsShortWindow | read-only | current | The number of seconds backwards from the specified timestamp that the the 'Short' window extends backwards in time. |
| 1.3.6.1.4.1.388.11.2.2.9.2 | ScalarccSumStatsShortUpdateInterval | read-only | current | The frequency at which the 'Short' summary stats are updated. |
| 1.3.6.1.4.1.388.11.2.2.9.3 | ScalarccSumStatsLongWindow | read-only | current | Same as corresponding 'Short' value, for the 'Long' window. |
| 1.3.6.1.4.1.388.11.2.2.9.4 | ScalarccSumStatsLongUpdateInterval | read-only | current | Same as corresponding 'Short' value, for the 'Long' window. |
| 1.3.6.1.4.1.388.11.2.2.10 | NodeccMgmtAccess | |||
| 1.3.6.1.4.1.388.11.2.2.10.1 | ScalarccMgmtAccessToAllow | read-write | current | Types of network management access to permit. |
| 1.3.6.1.4.1.388.11.2.2.10.2 | NodeccMgmtAccessAirbeam | |||
| 1.3.6.1.4.1.388.11.2.2.10.2.1 | ScalarccMgmtAccessAirbeamAllow | read-write | current | Allow Airbeam smart. (If enabled, Airbeam access is only allowed from the LAN interfaces). |
| 1.3.6.1.4.1.388.11.2.2.10.2.2 | ScalarccMgmtAccessAirbeamPassword | read-write | current | Airbeam password. (username is 'airbeam'). |
| 1.3.6.1.4.1.388.11.2.2.10.3 | NodeccMgmtAccessAdmin | |||
| 1.3.6.1.4.1.388.11.2.2.10.3.1 | ScalarccMgmtAccessAdminAuth | read-write | current | The type of authentication used to authenticate the administrator.It can be a local database or a radius server. |
| 1.3.6.1.4.1.388.11.2.2.10.3.2 | ScalarccMgmtAccessAdminPassword | read-write | current | Administrator password. Can only be read, (via GET), using a community string capable of writing, (via SET), the value. If an otherwise valid community string … |
| 1.3.6.1.4.1.388.11.2.2.10.3.4 | ScalarccMgmtAccessAdminAuthRadiusServerIp | read-write | current | The IP address of the radius server which is used to authenticate the administrator |
| 1.3.6.1.4.1.388.11.2.2.10.3.5 | ScalarccMgmtAccessAdminAuthRadiusServerPort | read-write | current | The port of the radius server which is used to authenticate the administrator |
| 1.3.6.1.4.1.388.11.2.2.10.3.6 | ScalarccMgmtAccessAdminAuthRadiusSharedSecret | read-write | current | The shared secret the radius server which is used to authenticate the administrator |
| 1.3.6.1.4.1.388.11.2.2.10.4 | NodeccMgmtAccessSsh | |||
| 1.3.6.1.4.1.388.11.2.2.10.4.1 | ScalarccMgmtAccessSshAuthTimeout | read-write | current | The duration within which the user can enter the password after providing the user id. |
| 1.3.6.1.4.1.388.11.2.2.10.4.2 | ScalarccMgmtAccessSshInactivityTimeout | read-write | current | The duration within which the server should receive the keep alive responses from the client. In SSH v2, the server shall timeout if does not receive Keep aliv… |
| 1.3.6.1.4.1.388.11.2.2.10.5 | ScalarccMgmtAccessHttpsTimeout | read-write | current | HTTP/HTTPS connection timeout. |
| 1.3.6.1.4.1.388.11.2.2.11 | NodeccLogging | |||
| 1.3.6.1.4.1.388.11.2.2.11.1 | ScalarccLoggingLevel | read-write | current | Level of logging to perform. |
| 1.3.6.1.4.1.388.11.2.2.11.2 | ScalarccLoggingToSyslog | read-write | current | Send logs to external syslog. |
| 1.3.6.1.4.1.388.11.2.2.11.3 | ScalarccLoggingSyslogServer | read-write | current | IP addr of syslog server. |
| 1.3.6.1.4.1.388.11.2.2.11.4 | ScalarccLoggingDeleteCoreFile | read-write | current | Delete the Core File. |
| 1.3.6.1.4.1.388.11.2.2.11.5 | ScalarccLoggingTransferCoreFile | read-write | current | Transfer the core file to external FTP server. |
| 1.3.6.1.4.1.388.11.2.2.12 | NodeccNtp | |||
| 1.3.6.1.4.1.388.11.2.2.12.1 | ScalarccNtpEnable | read-write | current | Enable NTP. |
| 1.3.6.1.4.1.388.11.2.2.12.2 | ScalarccNtp0Server | read-write | current | Preferred NTP server IPaddr. |
| 1.3.6.1.4.1.388.11.2.2.12.3 | ScalarccNtp0Port | read-write | current | Preferred NTP server port number. |
| 1.3.6.1.4.1.388.11.2.2.12.4 | ScalarccNtp1Server | read-write | current | 1st alternate NTP server IPaddr. |
| 1.3.6.1.4.1.388.11.2.2.12.5 | ScalarccNtp1Port | read-write | current | 1st alternate NTP server port number. |
| 1.3.6.1.4.1.388.11.2.2.12.6 | ScalarccNtp2Server | read-write | current | 2nd alternate NTP server IPaddr. |
| 1.3.6.1.4.1.388.11.2.2.12.7 | ScalarccNtp2Port | read-write | current | 2nd alternate NTP server port number. |
| 1.3.6.1.4.1.388.11.2.2.12.8 | ScalarccNtpGmtHourOffset | read-only | current | GMT Hour Offset. Not implemented in WS2000 2.0 |
| 1.3.6.1.4.1.388.11.2.2.12.9 | ScalarccNtpGmtMinuteOffset | read-only | current | GMT Minute Offset. Not implemented in WS2000 2.0 |
| 1.3.6.1.4.1.388.11.2.2.12.10 | ScalarccNtpCurrentDateTime | read-only | current | Current date/time. If NTP is not running, or has not yet synchronized the time, this value will be 0. |
| 1.3.6.1.4.1.388.11.2.2.12.11 | ScalarccNtpSyncInterval | read-write | current | Synchronization Interval (in minutes) |
| 1.3.6.1.4.1.388.11.2.2.14 | NodeccDhcpOptions | |||
| 1.3.6.1.4.1.388.11.2.2.14.1 | ScalarccDhcpOptionsUpdateFwEna | read-write | current | Enable updating of firmware using DHCP vendor options |
| 1.3.6.1.4.1.388.11.2.2.14.2 | ScalarccDhcpOptionsUpdateCfgEna | read-write | current | Enable updating of configuration using DHCP vendor options |
| 1.3.6.1.4.1.388.11.2.2.14.3 | ScalarccDhcpOptionsUpdateInterface | read-write | current | The interface to use in contacting the FTP or TFTP server. This is required since the actual firmware load is accomplished via boot code that does not contain … |
| 1.3.6.1.4.1.388.11.2.2.14.4 | ScalarccDhcpOptionsUpdateFwFilename | read-only | current | The firmware filename most recently provided via DHCP options. The success/failure of actually fetching that file via TFTP is reported in ccLoadFwSuccess and c… |
| 1.3.6.1.4.1.388.11.2.2.14.5 | ScalarccDhcpOptionsUpdateCfgFilename | read-only | current | The config filename most recently provided via DHCP options. The success/failure of actually fetching that file via TFTP is reported in ccLoadCfgSuccess and cc… |
| 1.3.6.1.4.1.388.11.2.2.15 | NodeccRedundancy | |||
| 1.3.6.1.4.1.388.11.2.2.15.1 | ScalarccRedundancyAdminState | read-write | current | The desired state of redundancy for this switch. 'standAlone' is for a switch with no redundancy. 'redundantPrimary' and 'redundantStandby' for when the switch… |
| 1.3.6.1.4.1.388.11.2.2.15.2 | ScalarccRedundancyOperState | read-write | current | The actual state of redundancy for this switch. |
| 1.3.6.1.4.1.388.11.2.2.15.3 | ScalarccRedundancyHeartbeatInterface | read-write | current | The interface to use in contacting the FTP or TFTP server. This is required since the actual firmware load is accomplished via boot code that does not contain … |
| 1.3.6.1.4.1.388.11.2.2.15.4 | ScalarccRedundancyHeartbeatInterval | read-write | current | The duration in seconds between consecutive heartbeats. User can control the frequency of hearbeats by tuning this parameter. |
| 1.3.6.1.4.1.388.11.2.2.15.5 | ScalarccRedundancyRevertDelay | read-write | current | The duration which the master WS2000 shall wait before taking over from a backup WS2000. |
| 1.3.6.1.4.1.388.11.2.2.15.6 | ScalarccRedundancyOperMode | read-only | current | Current Operational Mode of the switch. |
| 1.3.6.1.4.1.388.11.2.2.16 | NodeccCertMgnt | |||
| 1.3.6.1.4.1.388.11.2.2.16.1 | NodeccCertMgntSelfCerts | |||
| 1.3.6.1.4.1.388.11.2.2.16.1.1 | TableccCertMgntSelfCertsReqTable | not-accessible | current | This table allows the admin to create and store up to three certificate signature requests. The required fields are ccSelfCertsReqKeyId and ccSelfCertReqSubjec… |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1 | RowccCertMgntSelfCertsReqEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.1 | ColumnccCertMgntSelfCertsReqIndex | accessible-for-notify | current | Simple index. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.2 | ColumnccCertMgntSelfCertsReqKeyId | read-write | current | The ID for the certificate. Use this field to distinguish between certificates. This is a required field. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.3 | ColumnccCertMgntSelfCertsReqSubject | read-write | current | The subject of the certificate. This is a required field. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.4 | ColumnccCertMgntSelfCertsReqDept | read-write | current | The department that is making the request. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.5 | ColumnccCertMgntSelfCertsReqOrg | read-write | current | The name of the organization or company that is making the request. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.6 | ColumnccCertMgntSelfCertsReqCity | read-write | current | The name of the city where the organization resides. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.7 | ColumnccCertMgntSelfCertsReqState | read-write | current | The name of the state where the organzation resides. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.8 | ColumnccCertMgntSelfCertsReqPostal | read-write | current | The postal code (zip code in US) for the organization. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.9 | ColumnccCertMgntSelfCertsReqCountry | read-write | current | The two-letter ISO code for the country where the organization resides. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.10 | ColumnccCertMgntSelfCertsReqEmail | read-write | current | The email address to be used for identification purposes. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.11 | ColumnccCertMgntSelfCertsReqDomain | read-write | current | The domain name to associate with the certificate. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.12 | ColumnccCertMgntSelfCertsReqIp | read-write | current | The WAN IP of the WS 2000 Wireless Switch. Contact your CA to determine whether this field is required. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.13 | ColumnccCertMgntSelfCertsReqSigAlgo | read-write | current | The signature algorithm you want used for the certificate. The options are: MD5-RSA: This option uses the Message Digest 5 algorithm in combination with RSA en… |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.14 | ColumnccCertMgntSelfCertsReqKeyLen | read-write | current | The desired length of the key. Possible values are 512, 1024, and 2048. Select a lower number to enhance performance. Select a large number to enhance security. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.15 | ColumnccCertMgntSelfCertsReqGenReq | read-write | current | Start generating certificate request. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.16 | ColumnccCertMgntSelfCertsReqCertReqStr | read-only | current | The generated certificate request string. |
| 1.3.6.1.4.1.388.11.2.2.16.1.1.1.17 | ColumnccCertMgntSelfCertsReqRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.388.11.2.2.16.1.2 | ScalarccCertMgntSelfCertsIdName | read-write | current | ID Name of the signed certificate. |
| 1.3.6.1.4.1.388.11.2.2.16.1.3 | ScalarccCertMgntSelfCertsSignedStr | read-write | current | The signed certificate. |
| 1.3.6.1.4.1.388.11.2.2.16.1.4 | ScalarccCertMgntSelfCertsSignedImport | read-write | current | Start importing the signed certificate from ccCertMgntSelfCertsSignedStr to a new row in ccCertMgntSelfCertsSignedTable. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5 | TableccCertMgntSelfCertsSignedTable | not-accessible | current | This table allows the admin to store up to three signed certificates. This table supports a max size of three rows. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1 | RowccCertMgntSelfCertsSignedEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1.1 | ColumnccCertMgntSelfCertsSignedIndex | accessible-for-notify | current | Simple index. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1.2 | ColumnccCertMgntSelfCertsSignedKeyId | read-only | current | The ID for the certificate. Use this field to distinguish between certificates. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1.3 | ColumnccCertMgntSelfCertsSignedIssuerName | read-only | current | The name of the certificate authority who signed the certificate. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1.4 | ColumnccCertMgntSelfCertsSignedSubject | read-only | current | The subject of the certificate. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1.5 | ColumnccCertMgntSelfCertsSignedSerialNumber | read-only | current | The serial number of the certificate. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1.6 | ColumnccCertMgntSelfCertsSignedExpiry | read-only | current | The date when the certificate expires. |
| 1.3.6.1.4.1.388.11.2.2.16.1.5.1.7 | ColumnccCertMgntSelfCertsSignedDeleteRow | read-write | current | Delete row. |
| 1.3.6.1.4.1.388.11.2.2.16.2 | NodeccCACerts | |||
| 1.3.6.1.4.1.388.11.2.2.16.2.1 | ScalarccCACertsStr | read-write | current | The CA certificate to be imported. |
| 1.3.6.1.4.1.388.11.2.2.16.2.2 | ScalarccCACertsImport | read-write | current | Start import operation for the CA certificate stored in ccCACertsStr. This operation adds a row in ccCACertsTable. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3 | TableccCACertsTable | not-accessible | current | This table allows the admin to store up to three CA certificates. This table supports a max size of three rows. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1 | RowccCACertsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1.1 | ColumnccCACertsIndex | accessible-for-notify | current | Simple index. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1.2 | ColumnccCACertsKeyId | read-only | current | The ID for the certificate. Use this field to distinguish between certificates. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1.3 | ColumnccCACertsIssuerName | read-only | current | The name of the certificate authority. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1.4 | ColumnccCACertsSubject | read-only | current | The subject of the certificate. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1.5 | ColumnccCACertsSerialNumber | read-only | current | The serial number of the certificate. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1.6 | ColumnccCACertsExpiry | read-only | current | The date when the certificate expires. |
| 1.3.6.1.4.1.388.11.2.2.16.2.3.1.7 | ColumnccCACertsDeleteRow | read-write | current | Delete Row. |
| 1.3.6.1.4.1.388.11.2.3 | NodeccNotifications | |||
| 1.3.6.1.4.1.388.11.2.3.1 | NotificationccPortalAdopted | current | A Portal has been adopted by the switch. Example: Portal MAC=%s1 has been adopted. | |
| 1.3.6.1.4.1.388.11.2.3.2 | NotificationccPortalUnAdopted | current | A Portal has been un-adopted by the switch. Example: Portal MAC=%s1 has been UN-adopted for reason %s2. | |
| 1.3.6.1.4.1.388.11.2.3.3 | NotificationccPortalDenied | current | A Portal has been denied adoption by the switch. Example: Portal MAC=%s1 has been denied adopted for reason %s2. | |
| 1.3.6.1.4.1.388.11.2.3.4 | NotificationccMuAssociated | current | An MU has been associated to a Portal adopted by this switch. Example: MU MAC=%s1 has associated to Portal MAC=%s2. | |
| 1.3.6.1.4.1.388.11.2.3.5 | NotificationccMuUnAssociated | current | An MU has been un-associated to a Portal adopted by this switch. Example: MU MAC=%s1 has UN-associated from Portal MAC=%s2 for reason %s3. | |
| 1.3.6.1.4.1.388.11.2.3.6 | NotificationccMuDenied | current | An MU has been denied association to a Portal adopted by this switch. Example: MU MAC=%s1 has been denied association to Portal MAC=%s2 for reason %s3. | |
| 1.3.6.1.4.1.388.11.2.3.7 | NotificationccConfigChange | current | The configuration of this switch has changed. Example: The configuration of the switch changed as of sysUpTime=%s1; the total number of config changes since re… | |
| 1.3.6.1.4.1.388.11.2.3.8 | NotificationccSnmpAclViolation | current | An attempt to communicate via SNMP to the switch has been denied based on configured ACLs. Example: IP-addr %s1 has attempted, but been prohibited, from commun… | |
| 1.3.6.1.4.1.388.11.2.3.9 | NotificationccPortStatusChange | current | A [physical] port's state has changed from up down Example: Port %i1 has changed state to %s1. | |
| 1.3.6.1.4.1.388.11.2.3.10 | NotificationccCfAlmostFull | current | The compact flash is almost full; (it has crossed the threshold defined by ccTrapCtrlCfAlmostFullThreshold). Example: The compact flash is almost full; Used=%s… | |
| 1.3.6.1.4.1.388.11.2.3.11 | NotificationccFirewallUnderAttack | current | The firewall has detected an attack in progress. Example: The WAN firewall is being attached by method %s1. | |
| 1.3.6.1.4.1.388.11.2.3.12 | NotificationccRadarDetected | current | Radar has been detected on a Portal channel. Example: Radar has been detected on Portal MAC=%s1, on channel %s2. | |
| 1.3.6.1.4.1.388.11.2.3.13 | NotificationccSumStatsMu | current | A summary statistic has crossed the prescribed threshold by an MU. Example: Threshold '%s1' of value %s2 (units:%s3) has been crossed by MU MAC=%s4 with IP-add… | |
| 1.3.6.1.4.1.388.11.2.3.14 | NotificationccSumStatsPortal | current | A summary statistic has crossed the prescribed threshold by a Portal. Example: Threshold #%s1 of value %s2 (units:%s3) has been crossed by Portal index=%s4 wit… | |
| 1.3.6.1.4.1.388.11.2.3.15 | NotificationccSumStatsWlan | current | A summary statistic has crossed the prescribed threshold by a WLAN. Example: Threshold #%s1 of value %s2 (units:%s3) has been crossed by WLAN index=%s4 with na… | |
| 1.3.6.1.4.1.388.11.2.3.16 | NotificationccSumStatsSwitch | current | A summary statistic has crossed the prescribed threshold by the entire Switch. Example: Threshold %s1 of value %s2 (units:%s3) has been crossed by the entire s… | |
| 1.3.6.1.4.1.388.11.2.3.17 | NotificationccLanVlanActivated | current | A Vlan is activated. When ever a MU is associated with the switch, and it receives a VLAN attribute from the radius server, the specified VLAN is activated. | |
| 1.3.6.1.4.1.388.11.2.3.18 | NotificationccDhcpOptionsFileTransferStatus | current | Trap to say that the device received DHCP options instructing it to load a new fw or cnfg file, and that it has completed the transfer. The varbinds tell if th… | |
| 1.3.6.1.4.1.388.11.2.3.19 | NotificationccRedundancyStateChange | current | The state of this switch's ccRedundancyOperState has changed. Example: The switch has changed it's redundancy state to %s1. | |
| 1.3.6.1.4.1.388.11.2.3.1000 | NodeccTrapCtrl | |||
| 1.3.6.1.4.1.388.11.2.3.1000.1 | TableccTrapCtrlEnableTable | not-accessible | current | Table of Trap Enable entries. |
| 1.3.6.1.4.1.388.11.2.3.1000.1.1 | RowccTrapCtrlEnableEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.3.1000.1.1.1 | ColumnccTrapCtrlEnableIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.3.1000.1.1.2 | ColumnccTrapCtrlEnableName | read-only | current | Name of the Trap. |
| 1.3.6.1.4.1.388.11.2.3.1000.1.1.3 | ColumnccTrapCtrlEnable | read-write | current | Enable/Disbale a particular Trap. |
| 1.3.6.1.4.1.388.11.2.3.1000.2 | NodeccTrapCtrlDetails | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.1 | IdentityccTrapCtrlPortalAdopted | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.2 | IdentityccTrapCtrlPortalUnAdopted | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.3 | IdentityccTrapCtrlPortalDenied | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.4 | IdentityccTrapCtrlMuAssociated | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.5 | IdentityccTrapCtrlMuUnAssociated | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.6 | IdentityccTrapCtrlMuDenied | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.7 | IdentityccTrapCtrlConfigChange | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.8 | IdentityccTrapCtrlSnmpAclViolation | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.9 | IdentityccTrapCtrlPortStatusChange | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.10 | NodeccTrapCtrlCfAlmostFull | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.10.1 | ScalarccTrapCtrlCfAlmostFullThreshold | read-write | current | A ccCfAlmostFull trap will be sent when less than this number of bytes are remained on the Compact Flash card. The trap is currently scheduled to fire every 5 … |
| 1.3.6.1.4.1.388.11.2.3.1000.2.11 | NodeccTrapCtrlFirewallUnderAttack | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.11.1 | ScalarccTrapCtrlFirewallUnderAttackDescription | accessible-for-notify | current | Description of Firewall Under Attack. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.11.2 | ScalarccTrapCtrlFirewallUnderAttackRateLimit | read-write | current | The max rate at which ccFirewallUnderAttack traps/notifications will be sent from the switch. If the switch detects a FirewallUnderAttack condition and it has … |
| 1.3.6.1.4.1.388.11.2.3.1000.2.12 | NodeccTrapCtrlRadarDetected | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.12.1 | ScalarccTrapCtrlRadarDetectedPortalMac | accessible-for-notify | current | MAC address of the Portal that has detected Radar. (Note that this variable is accessible-for-notify only). |
| 1.3.6.1.4.1.388.11.2.3.1000.2.12.2 | ScalarccTrapCtrlRadarDetectedChannel | accessible-for-notify | current | Channel on which Radar has been detected. (Note that this variable is accessible-for-notify only). |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13 | NodeccTrapCtrlSumStats | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1 | TableccTrapCtrlSumStatsTable | not-accessible | current | This table configures thresholds that can be monitored for - all MUs and/or - all Portals and/or - all WLANs and/or - for the entire switch When a given thresh… |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1 | RowccTrapCtrlSumStatsEntry | not-accessible | current | The rows/instances in this table occur at the exact same indices as the corresponding monitored data occurs in the _SumStats tables. For example, row #2 / inst… |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.1 | ColumnccTrapCtrlSumStatsIndex | accessible-for-notify | current | Index into table. Note that specific thresholds occur at specific instance values as denoted by the enumeration values assigned to this variable. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.2 | ColumnccTrapCtrlSumStatsDescr | read-only | current | Description of the threshold. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.3 | ColumnccTrapCtrlSumStatsUnits | read-only | current | Units of the the threshold. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.4 | ColumnccTrapCtrlSumStatsCanBeSetMu | read-only | current | If true, the threshold can be set for MUs. If false, attempting the threshold will return a READ-ONLY. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.5 | ColumnccTrapCtrlSumStatsThresholdMu | read-write | current | The threshold for all MUs. If 0, no threshold checking is performed. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.6 | ColumnccTrapCtrlSumStatsCanBeSetPortal | read-only | current | If true, the threshold can be set for Portals. If false, attempting the threshold will return a READ-ONLY. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.7 | ColumnccTrapCtrlSumStatsThresholdPortals | read-write | current | The threshold for all Portals. If 0, no threshold checking is performed. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.8 | ColumnccTrapCtrlSumStatsCanBeSetWlan | read-only | current | If true, the threshold can be set for Wlans. If false, attempting the threshold will return a READ-ONLY. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.9 | ColumnccTrapCtrlSumStatsThresholdWlans | read-write | current | The threshold for all Wlans. If 0, no threshold checking is performed. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.10 | ColumnccTrapCtrlSumStatsCanBeSetSwitch | read-only | current | If true, the threshold can be set for the entire switch. If false, attempting the threshold will return a READ-ONLY. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.11 | ColumnccTrapCtrlSumStatsThresholdSwitch | read-write | current | The threshold for the entire Switch. If 0, no threshold checking is performed. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.13.2 | ScalarccTrapCtrlSumStatsMinPktsForTrap | read-write | current | The minimum number of packets that must be in a window/dataset before any of the threshold traps will 'fire'. |
| 1.3.6.1.4.1.388.11.2.3.1000.2.14 | IdentityccTrapCtrlSumStatsPortal | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.15 | IdentityccTrapCtrlSumStatsWlan | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.16 | IdentityccTrapCtrlSumStatsSwitch | current | (place-holder for future use and to keep the last OID of each ccTrapCtrl_ item here to match the last OID of the corresponding notification). | |
| 1.3.6.1.4.1.388.11.2.3.1000.2.17 | NodeccTrapCtrlLanVlanActivated | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.17.1 | ScalarccTrapCtrlLanVlanActivatedVlanId | accessible-for-notify | current | VLAN ID to which MU has been associated. (Note that this variable is accessible-for-notify only). |
| 1.3.6.1.4.1.388.11.2.3.1000.2.18 | NodeccTrapCtrlDhcpOptionsFileTransferStatus | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.18.1 | ScalarccTrapCtrlDhcpOptionsFileTransferStatusRequested | accessible-for-notify | current | DHCP request received. (Note that this variable is accessible-for-notify only). |
| 1.3.6.1.4.1.388.11.2.3.1000.2.19 | NodeccTrapCtrlRedundancyStateChange | |||
| 1.3.6.1.4.1.388.11.2.3.1000.2.19.1 | ScalarccTrapCtrlRedundancyPreviousOperState | accessible-for-notify | current | The actual state of redundancy for this switch. |
| 1.3.6.1.4.1.388.11.2.4 | NodeccRf | |||
| 1.3.6.1.4.1.388.11.2.4.1 | NodeccAp | |||
| 1.3.6.1.4.1.388.11.2.4.1.1 | TableccApTable | not-accessible | current | This table lists all Access Ports that contain at least one Portal that has been adopted by this WS2000. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1 | RowccApEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.1 | ColumnccApIndex | accessible-for-notify | current | Small, arbitrary integer index. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.2 | ColumnccApNicMac | read-only | current | MAC address of this Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.3 | ColumnccApModelNumber | read-only | current | Model number of the Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.4 | ColumnccApSerialNumber | read-only | current | Serial Number of this Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.5 | ColumnccApPcbRevision | read-only | current | Revision of the printed circuit board for this Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.6 | ColumnccApBootLoaderRev | read-only | current | Revision of the boot loader code in this Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.7 | ColumnccApWispVersion | read-only | current | Version of the WISP (AP-switch) protocol implemented by this Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.8 | ColumnccApRuntimeFwVersion | read-only | current | Version of run-time code on this Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.9 | ColumnccApNumPortals | read-only | current | The number of Portals implemented on this Access Port. |
| 1.3.6.1.4.1.388.11.2.4.1.1.1.10 | ColumnccApPointersToPortals | read-only | current | If bit <n> of this value is set, this ApTable entry 'points' to entry <n> in the Portal Table. Such a reference conveys that the Portal entry pointed-to repres… |
| 1.3.6.1.4.1.388.11.2.4.2 | NodeccPortal | |||
| 1.3.6.1.4.1.388.11.2.4.2.1 | TableccPortalTable | not-accessible | current | This table lists all Portals that have been adopted or have failed adoption (by this WS2000). |
| 1.3.6.1.4.1.388.11.2.4.2.1.1 | RowccPortalEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.1 | ColumnccPortalIndex | accessible-for-notify | current | Small, arbitrary integer index. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.2 | ColumnccPortalPointerToAp | read-only | current | This value is the index in the ApTable for the entry representing the Access Port that contains this Portal. Since each Portal has one and only one Access Port… |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.3 | ColumnccPortalPointersToWlans | read-only | current | (Reserved for future implementation). |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.4 | ColumnccPortalName | read-only | current | Name of this Portal, as assigned by the Web UI or CLI. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.5 | ColumnccPortalLocation | read-only | current | Location string for this Portal, as assigned by the Web UI or CLI. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.6 | ColumnccPortalOptions | read-only | current | This value describes the presence/absence of internal and/or external primary and/or secondary antennas. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.7 | ColumnccPortalMac | read-only | current | MAC address of the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.8 | ColumnccPortalNumberOfEss | read-only | current | The number of ESSs implemented by this Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.9 | ColumnccPortalNumberOfBss | read-only | current | The number of BSSs implemented by this Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.10 | ColumnccPortalAssociatedMus | read-only | current | The number of MUs currently associated to this Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.11 | ColumnccPortalRadioType | read-only | current | Radio type of the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.12 | ColumnccPortalChannel | read-only | current | The value describes the channel the Portal is currently operating on. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.13 | ColumnccPortalTxPowerLevel | read-only | current | Output power level for the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.14 | ColumnccPortalLastAdoption | read-only | current | A snapshot of the WS2000's sysUpTime when this Portal was last adopted. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.15 | ColumnccPortalState | read-only | current | This value describes the state of the Portal. A healthy Portal would power-on, and quickly advance from portalUpAndWaitingForConfig and then on to portalReceiv… |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.16 | ColumnccPortalBackgroundNoiseNumSamples | read-only | current | Total packets received via the Portal included in all the other counters reported in this row. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.17 | ColumnccPortalBackgroundNoiseBest | read-only | current | The best Signal value seen from the Portal so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.18 | ColumnccPortalBackgroundNoiseWorst | read-only | current | The worst Signal value seen from the Portal so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.19 | ColumnccPortalBackgroundNoiseSum | read-only | current | A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received via this Portal. Note that this value is normall… |
| 1.3.6.1.4.1.388.11.2.4.2.1.1.20 | ColumnccPortalBackgroundNoiseSumSquares | read-only | current | A sum of the squares of each Signal value calculated for packets received via this Portal. Unlike _SignalSum, this value is never negative, since the square of… |
| 1.3.6.1.4.1.388.11.2.4.2.2 | ScalarccPortalLastMac | read-only | current | This scalar records the MAC address of the most recent Portal to be Adopted, UnAdopted, or Denied. |
| 1.3.6.1.4.1.388.11.2.4.2.3 | ScalarccPortalLastReason | read-only | current | This value notes the reason for the most-recent Portal UnAdoption or Denial. |
| 1.3.6.1.4.1.388.11.2.4.2.4 | TableccPortalAdoptionTable | not-accessible | current | Table describing which WLANs are eligible to adopt a new portal. The illegal MAC address value of 'FF:FF:FF:FF:FF:FF' is used in both _StartMac and _EndMac fie… |
| 1.3.6.1.4.1.388.11.2.4.2.4.1 | RowccPortalAdoptionEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.4.1.1 | ColumnccPortalAdoptionIndex | accessible-for-notify | current | Table that describes which portals can be adopted by which WLANs. |
| 1.3.6.1.4.1.388.11.2.4.2.4.1.2 | ColumnccPortalAdoptionStartMac | read-write | current | Starting MAC address of range of MAC addresses. |
| 1.3.6.1.4.1.388.11.2.4.2.4.1.3 | ColumnccPortalAdoptionEndMac | read-write | current | Ending MAC address of range of MAC addresses. |
| 1.3.6.1.4.1.388.11.2.4.2.4.1.4 | ColumnccPortalAdoptionWlanPointers | read-write | current | Pointer to zero or more WLANs which are eligible to adopt portals whose MAC address falls within the specified range. Any WLAN selected by this value must firs… |
| 1.3.6.1.4.1.388.11.2.4.2.4.1.5 | ColumnccPortalAdoptionRowStatus | read-write | current | Simple row status. |
| 1.3.6.1.4.1.388.11.2.4.2.5 | TableccPortalSystemStatsTable | not-accessible | current | This table includes statistics for 802.11 system packets transmitted/received at each Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1 | RowccPortalSystemStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.1 | ColumnccPortalSystemStatsBeaconsTx | read-only | current | The number of Beacons sent. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.2 | ColumnccPortalSystemStatsBeaconsTxOctets | read-only | current | The number of octets sent in Beacons. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.3 | ColumnccPortalSystemStatsProbeReqRx | read-only | current | The number of Probe Request packets received. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.4 | ColumnccPortalSystemStatsProbeReqRxOctets | read-only | current | The number of octets received in Probe Request packets. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.5 | ColumnccPortalSystemStatsProbeRespRetriesNone | read-only | current | The number of Probe Response packets sent with no retries. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.6 | ColumnccPortalSystemStatsProbeRespRetries1 | read-only | current | The number of Probe Response packets sent with exactly 1 retry. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.7 | ColumnccPortalSystemStatsProbeRespRetries2 | read-only | current | The number of Probe Response packets sent with exactly 2 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.8 | ColumnccPortalSystemStatsProbeRespRetries3OrMore | read-only | current | The number of Probe Response packets sent with exactly 3 retries or more retries. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.9 | ColumnccPortalSystemStatsProbeRespRetriesFailed | read-only | current | The number of Probe Response packets that were never successfully transmitted because the max retry count was reached. |
| 1.3.6.1.4.1.388.11.2.4.2.5.1.10 | ColumnccPortalSystemStatsProbeRespTxOctets | read-only | current | The number of octets successfully transmitted in Probe Response packets. (For example, the octets in a Probe Response that is transmitted twice - one retry - o… |
| 1.3.6.1.4.1.388.11.2.4.2.6 | TableccPortalSettingsTable | not-accessible | current | Use ccPortalSettingsTable to view and set the properties of the Access Ports. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1 | RowccPortalSettingsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.1 | ColumnccPortalSettingsName | read-write | current | Name of Access Port. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.2 | ColumnccPortalSettingsLocation | read-write | current | Site location of Access Port. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.3 | ColumnccPortalSettingsAntenna | read-write | current | The antenna diversity setting for the access port. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.4 | ColumnccPortalSettingsShortPreamble | read-write | current | Enable support for Short Preamble when MUs associate with the Access Port. Enabling Short Preamble may cause incompatibility with some older clients. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.5 | ColumnccPortalSettingsUniSpread | read-write | current | Eable the Uniform Spreading feature of the AP300. To comply with Dynamic Frequency Selection(DFS) requirements in the European Union, the 802.11a radio on AP30… |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.6 | ColumnccPortalSettingsRtsThresh | read-write | current | The Request To Send(RTS) threshold(in bytes) for use by the WLAN's adopted Access Port. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.7 | ColumnccPortalSettingsBeaconInt | read-write | current | Specify a beacon interval in units of 1,000 microseconds (K-us). This is a multiple of the DTIM (ccPortalCfgDefaultADtimPrd) value, for example, 100 : 10. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.8 | ColumnccPortalSettingsDtimPrd | read-write | current | Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.9 | ColumnccPortalSettingsSecBeacon | read-write | current | Enable the Secure Beacon checkbox to disallow the Access Port from broadcasting an ESSID in its beacons. This is a safeguard to prevent intruders from tapping … |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.10 | ColumnccPortalSettingsPriWlan | read-write | current | Associate a primary WLAN with the Access Port for broadcast of the Extended Service Set Identification (ESSID). The purpose of such broadcasting is to allow mo… |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.11 | ColumnccPortalSettingsBasicRates | read-write | current | List of basic rates for the radio. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.12 | ColumnccPortalSettingsSupportedRates | read-write | current | List of supported rates for the radio. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.13 | ColumnccPortalSettingsBGMode | read-write | current | Radio mode. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.14 | ColumnccPortalSettingsAdoptedWlan | read-only | current | Enable the bits for the WLANs you wish to associate the Access Port with. |
| 1.3.6.1.4.1.388.11.2.4.2.6.1.15 | ColumnccPortalSettingsDetector | read-write | current | Description. |
| 1.3.6.1.4.1.388.11.2.4.2.7 | TableccPortalCfgRadioTable | not-accessible | current | Use ccPortalCfgRadioTable to view and set the radio properties of the Access Ports. The process can be broken down into the following steps: 1. Set ccPortalCfg… |
| 1.3.6.1.4.1.388.11.2.4.2.7.1 | RowccPortalCfgRadioEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.1 | ColumnccPortalCfgRadioDesPlacement | read-write | current | The desired placement for radio. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.2 | ColumnccPortalCfgRadioPosChannel | read-only | current | The possible channels that can be set when placement = ccPortalCfgRadioDesPlacement. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.3 | ColumnccPortalCfgRadioDesChannel | read-write | current | The desired channel for radio. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.4 | ColumnccPortalCfgRadioPosPowerLevel | read-only | current | The max possible power level (dBm) that can be set when channel= ccPortalCfgRadioDesChannel. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.5 | ColumnccPortalCfgRadioDesPowerLevel | read-write | current | The desired power level (dBm) for radio. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.6 | ColumnccPortalCfgRadioDesPowerInMW | read-only | current | ccPortalCfgRadioDesPowerLevel in mW. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.7 | ColumnccPortalCfgRadioSet | read-write | current | Validate values in ccPortalCfgRadioDes_ fields. If it is a valid combination, configure the switch with this combination and set ccPortalCfgRadio_ to these val… |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.8 | ColumnccPortalCfgRadioReset | read-write | current | Reset the following OIDs. ccPortalCfgRadioDesPlacement ccPortalCfgRadioDesChannel ccPortalCfgRadioDesPowerLevel ccPortalCfgRadioPosChannel ccPortalCfgRadioPosP… |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.9 | ColumnccPortalCfgRadioPlacement | read-only | current | The placement configuration for radio. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.10 | ColumnccPortalCfgRadioChannel | read-only | current | The channel configuration for radio. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.11 | ColumnccPortalCfgRadioPowerLevel | read-only | current | The power level (dBm) configuration for radio. |
| 1.3.6.1.4.1.388.11.2.4.2.7.1.12 | ColumnccPortalCfgRadioPowerInMW | read-only | current | ccPortalCfgRadioPowerLevel in mW. |
| 1.3.6.1.4.1.388.11.2.4.2.8 | TableccPortalSettingsDefaultTable | not-accessible | current | The ccPortalSettingsDefaultsTable contains the initial settings for the Access Ports. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1 | RowccPortalSettingsDefaultEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.1 | ColumnccPortalSettingsDefaultIndex | accessible-for-notify | current | The type of the radio |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.2 | ColumnccPortalSettingsDefaultAntenna | read-write | current | The antenna diversity setting for the access port. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.3 | ColumnccPortalSettingsDefaultShortPreamble | read-write | current | Enable support for Short Preamble when MUs associate with the Access Port. Enabling Short Preamble may cause incompatibility with some older clients. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.4 | ColumnccPortalSettingsDefaultUniSpread | read-write | current | Eable the Uniform Spreading feature of the AP300. To comply with Dynamic Frequency Selection(DFS) requirements in the European Union, the 802.11a radio on AP30… |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.5 | ColumnccPortalSettingsDefaultRtsThresh | read-write | current | The Request To Send(RTS) threshold(in bytes) for use by the WLAN's adopted Access Port. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.6 | ColumnccPortalSettingsDefaultBeaconInt | read-write | current | Specify a beacon interval in units of 1,000 microseconds (K-us). This is a multiple of the DTIM (ccPortalCfgDefaultADtimPrd) value, for example, 100 : 10. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.7 | ColumnccPortalSettingsDefaultDtimPrd | read-write | current | Specify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.8 | ColumnccPortalSettingsDefaultSecBeacon | read-write | current | Enable the Secure Beacon checkbox to disallow the Access Port from broadcasting an ESSID in its beacons. This is a safeguard to prevent intruders from tapping … |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.9 | ColumnccPortalSettingsDefaultPriWlan | read-write | current | Associate a primary WLAN with the Access Port for broadcast of the Extended Service Set Identification (ESSID). The purpose of such broadcasting is to allow mo… |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.10 | ColumnccPortalSettingsDefaultBasicRates | read-write | current | List of basic rates for the radio. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.11 | ColumnccPortalSettingsDefaultSupportedRates | read-write | current | List of supported rates for the radio. |
| 1.3.6.1.4.1.388.11.2.4.2.8.1.12 | ColumnccPortalSettingsDefaultBGMode | read-write | current | Radio mode. |
| 1.3.6.1.4.1.388.11.2.4.2.9 | TableccPortalCfgRadioDefaultTable | not-accessible | current | The ccPortalCfgRadioDefaultTable contains the initial settings for the radio settings of the Access Ports. Please refer to descriptions in ccPortalCfgRadioTabl… |
| 1.3.6.1.4.1.388.11.2.4.2.9.1 | RowccPortalCfgRadioDefaultEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.1 | ColumnccPortalCfgRadioDefaultDesPlacement | read-write | current | The default desired placement for radio type. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.2 | ColumnccPortalCfgRadioDefaultPosChannel | read-only | current | The possible channels that can be set when placement = ccPortalCfgRadioDefaultDesPlacement. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.3 | ColumnccPortalCfgRadioDefaultDesChannel | read-write | current | The default desired channel for radio type. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.4 | ColumnccPortalCfgRadioDefaultPosPowerLevel | read-only | current | The max possible power level (dBm) that can be set when channel= ccPortalCfgRadioDefaultDesChannel. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.5 | ColumnccPortalCfgRadioDefaultDesPowerLevel | read-write | current | The desired power level (dBm) for radio. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.6 | ColumnccPortalCfgRadioDefaultDesPowerInMW | read-only | current | ccPortalCfgRadioDefaultDesPowerLevel in mW. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.7 | ColumnccPortalCfgRadioDefaultSet | read-write | current | Validate values in ccPortalCfgRadioDefaultDes_ fields. If it is a valid combination, configure the switch with this combination and set ccPortalCfgRadioDefault… |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.8 | ColumnccPortalCfgRadioDefaultReset | read-write | current | Reset the following OIDs. ccPortalCfgRadioDefaultDesPlacement ccPortalCfgRadioDefaultDesChannel ccPortalCfgRadioDefaultDesPowerLevel ccPortalCfgRadioDefaultPos… |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.9 | ColumnccPortalCfgRadioDefaultPlacement | read-only | current | The default placement configuration for radio type. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.10 | ColumnccPortalCfgRadioDefaultChannel | read-only | current | The default channel configuration for radio type. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.11 | ColumnccPortalCfgRadioDefaultPowerLevel | read-only | current | The default power level (dBm) configuration for radio type. |
| 1.3.6.1.4.1.388.11.2.4.2.9.1.12 | ColumnccPortalCfgRadioDefaultPowerInMW | read-only | current | ccPortalCfgRadioDefaultPowerLevel in mW. |
| 1.3.6.1.4.1.388.11.2.4.2.10 | Nodecc802dt1xPortAuth | |||
| 1.3.6.1.4.1.388.11.2.4.2.10.1 | Scalarcc802dt1xPortAuthLogin | read-write | current | 802.1x Port Authentication username. |
| 1.3.6.1.4.1.388.11.2.4.2.10.2 | Scalarcc802dt1xPortAuthPass | read-write | current | 802.1x Port Authentication password. |
| 1.3.6.1.4.1.388.11.2.4.2.10.3 | Scalarcc802dt1xPortAuthSetAp300 | read-write | current | Set the username and password stored in cc802dt1xPortAuthLogin and cc802dt1xPortAuthPass on all AP 300 Access Ports adopted by the switch. |
| 1.3.6.1.4.1.388.11.2.4.2.100 | NodeccPortalRfSum | |||
| 1.3.6.1.4.1.388.11.2.4.2.100.1 | TableccPortalStatsTable | not-accessible | current | This table describes general statistics about packets sent/recieved via each Portal on the switch. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1 | RowccPortalStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.1 | ColumnccPortalTxPktsUcast | read-only | current | Count of unicast packets sent via the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.2 | ColumnccPortalRxPktsUcast | read-only | current | Count of unicast packets received via the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.3 | ColumnccPortalRxPktsNUcast | read-only | current | Count of non-unicast (broadcast & multicast) packets received via the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.4 | ColumnccPortalTxOctetsUcast | read-only | current | Count of unicast octets sent via the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.5 | ColumnccPortalRxOctetsUcast | read-only | current | Count of unicast octets received via the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.6 | ColumnccPortalRxOctetsNUcast | read-only | current | Count of non-unicast (broadcast & multicast) octets received via the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.7 | ColumnccPortalRxUndecryptablePkts | read-only | current | Count of packets received via the Portal that could not be decrypted. |
| 1.3.6.1.4.1.388.11.2.4.2.100.1.1.8 | ColumnccPortalLastActivity | read-only | current | A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received) via the Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2 | TableccPortalRxPktsTable | not-accessible | current | For each Portal on the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1 | RowccPortalRxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.1 | ColumnccPortalRxPktsAt1Mb | read-only | current | Number of pkts received via this Portal at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.2 | ColumnccPortalRxPktsAt2Mb | read-only | current | Number of pkts received via this Portal at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.3 | ColumnccPortalRxPktsAt5pt5Mb | read-only | current | Number of pkts received via this Portal at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.4 | ColumnccPortalRxPktsAt6Mb | read-only | current | Number of pkts received via this Portal at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.5 | ColumnccPortalRxPktsAt9Mb | read-only | current | Number of pkts received via this Portal at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.6 | ColumnccPortalRxPktsAt11Mb | read-only | current | Number of pkts received via this Portal at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.7 | ColumnccPortalRxPktsAt12Mb | read-only | current | Number of pkts received via this Portal at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.8 | ColumnccPortalRxPktsAt18Mb | read-only | current | Number of pkts received via this Portal at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.9 | ColumnccPortalRxPktsAt22Mb | read-only | current | Number of pkts received via this Portal at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.10 | ColumnccPortalRxPktsAt24Mb | read-only | current | Number of pkts received via this Portal at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.11 | ColumnccPortalRxPktsAt36Mb | read-only | current | Number of pkts received via this Portal at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.12 | ColumnccPortalRxPktsAt48Mb | read-only | current | Number of pkts received via this Portal at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.2.1.13 | ColumnccPortalRxPktsAt54Mb | read-only | current | Number of pkts received via this Portal at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3 | TableccPortalTxPktsTable | not-accessible | current | For each Portal on the switch, this table describes counts of packets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1 | RowccPortalTxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.1 | ColumnccPortalTxPktsAt1Mb | read-only | current | Number of pkts transmitted via this Portal at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.2 | ColumnccPortalTxPktsAt2Mb | read-only | current | Number of pkts transmitted via this Portal at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.3 | ColumnccPortalTxPktsAt5pt5Mb | read-only | current | Number of pkts transmitted via this Portal at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.4 | ColumnccPortalTxPktsAt6Mb | read-only | current | Number of pkts transmitted via this Portal at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.5 | ColumnccPortalTxPktsAt9Mb | read-only | current | Number of pkts transmitted via this Portal at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.6 | ColumnccPortalTxPktsAt11Mb | read-only | current | Number of pkts transmitted via this Portal at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.7 | ColumnccPortalTxPktsAt12Mb | read-only | current | Number of pkts transmitted via this Portal at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.8 | ColumnccPortalTxPktsAt18Mb | read-only | current | Number of pkts transmitted via this Portal at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.9 | ColumnccPortalTxPktsAt22Mb | read-only | current | Number of pkts transmitted via this Portal at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.10 | ColumnccPortalTxPktsAt24Mb | read-only | current | Number of pkts transmitted via this Portal at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.11 | ColumnccPortalTxPktsAt36Mb | read-only | current | Number of pkts transmitted via this Portal at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.12 | ColumnccPortalTxPktsAt48Mb | read-only | current | Number of pkts transmitted via this Portal at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.3.1.13 | ColumnccPortalTxPktsAt54Mb | read-only | current | Number of pkts transmitted via this Portal at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4 | TableccPortalRxOctetsTable | not-accessible | current | For each Portal on this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1 | RowccPortalRxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.1 | ColumnccPortalRxOctetsAt1Mb | read-only | current | Number of octets received via this Portal at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.2 | ColumnccPortalRxOctetsAt2Mb | read-only | current | Number of octets received via this Portal at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.3 | ColumnccPortalRxOctetsAt5pt5Mb | read-only | current | Number of octets received via this Portal at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.4 | ColumnccPortalRxOctetsAt6Mb | read-only | current | Number of octets received via this Portal at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.5 | ColumnccPortalRxOctetsAt9Mb | read-only | current | Number of octets received via this Portal at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.6 | ColumnccPortalRxOctetsAt11Mb | read-only | current | Number of octets received via this Portal at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.7 | ColumnccPortalRxOctetsAt12Mb | read-only | current | Number of octets received via this Portal at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.8 | ColumnccPortalRxOctetsAt18Mb | read-only | current | Number of octets received via this Portal at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.9 | ColumnccPortalRxOctetsAt22Mb | read-only | current | Number of octets received via this Portal at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.10 | ColumnccPortalRxOctetsAt24Mb | read-only | current | Number of octets received via this Portal at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.11 | ColumnccPortalRxOctetsAt36Mb | read-only | current | Number of octets received via this Portal at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.12 | ColumnccPortalRxOctetsAt48Mb | read-only | current | Number of octets received via this Portal at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.4.1.13 | ColumnccPortalRxOctetsAt54Mb | read-only | current | Number of octets received via this Portal at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5 | TableccPortalTxOctetsTable | not-accessible | current | For each Portal on this switch, this table describes counts of octets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1 | RowccPortalTxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.1 | ColumnccPortalTxOctetsAt1Mb | read-only | current | Number octets transmitted via this Portal at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.2 | ColumnccPortalTxOctetsAt2Mb | read-only | current | Number octets transmitted via this Portal at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.3 | ColumnccPortalTxOctetsAt5pt5Mb | read-only | current | Number octets transmitted via this Portal at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.4 | ColumnccPortalTxOctetsAt6Mb | read-only | current | Number octets transmitted via this Portal at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.5 | ColumnccPortalTxOctetsAt9Mb | read-only | current | Number octets transmitted via this Portal at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.6 | ColumnccPortalTxOctetsAt11Mb | read-only | current | Number octets transmitted via this Portal at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.7 | ColumnccPortalTxOctetsAt12Mb | read-only | current | Number octets transmitted via this Portal at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.8 | ColumnccPortalTxOctetsAt18Mb | read-only | current | Number octets transmitted via this Portal at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.9 | ColumnccPortalTxOctetsAt22Mb | read-only | current | Number octets transmitted via this Portal at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.10 | ColumnccPortalTxOctetsAt24Mb | read-only | current | Number octets transmitted via this Portal at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.11 | ColumnccPortalTxOctetsAt36Mb | read-only | current | Number octets transmitted via this Portal at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.12 | ColumnccPortalTxOctetsAt48Mb | read-only | current | Number octets transmitted via this Portal at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.5.1.13 | ColumnccPortalTxOctetsAt54Mb | read-only | current | Number octets transmitted via this Portal at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6 | TableccPortalTxRetriesPktsTable | not-accessible | current | For each Portal on the switch, this table describes counts of the number of packets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1 | RowccPortalTxRetriesPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.1 | ColumnccPortalTxRetriesPktsNone | read-only | current | Number of pkts successfully transmitted via this Portal with no retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.2 | ColumnccPortalTxRetriesPkts01 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 1 retry. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.3 | ColumnccPortalTxRetriesPkts02 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 2 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.4 | ColumnccPortalTxRetriesPkts03 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 3 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.5 | ColumnccPortalTxRetriesPkts04 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 4 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.6 | ColumnccPortalTxRetriesPkts05 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 5 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.7 | ColumnccPortalTxRetriesPkts06 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 6 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.8 | ColumnccPortalTxRetriesPkts07 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 7 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.9 | ColumnccPortalTxRetriesPkts08 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 8 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.10 | ColumnccPortalTxRetriesPkts09 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 9 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.11 | ColumnccPortalTxRetriesPkts10 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 10 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.12 | ColumnccPortalTxRetriesPkts11 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 11 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.13 | ColumnccPortalTxRetriesPkts12 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 12 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.14 | ColumnccPortalTxRetriesPkts13 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 13 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.15 | ColumnccPortalTxRetriesPkts14 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 14 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.16 | ColumnccPortalTxRetriesPkts15 | read-only | current | Number of pkts successfully transmitted via this Portal with exactly 15 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.6.1.17 | ColumnccPortalTxRetriesPktsFailed | read-only | current | Number of pkts that never were successfully transmitted to via this Portal because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7 | TableccPortalTxRetriesOctetsTable | not-accessible | current | For each Portal on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1 | RowccPortalTxRetriesOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.1 | ColumnccPortalTxRetriesOctetsNone | read-only | current | Number of octets successfully transmitted via this Portal with no retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.2 | ColumnccPortalTxRetriesOctets01 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 1 retry. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.3 | ColumnccPortalTxRetriesOctets02 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 2 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.4 | ColumnccPortalTxRetriesOctets03 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 3 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.5 | ColumnccPortalTxRetriesOctets04 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 4 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.6 | ColumnccPortalTxRetriesOctets05 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 5 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.7 | ColumnccPortalTxRetriesOctets06 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 6 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.8 | ColumnccPortalTxRetriesOctets07 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 7 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.9 | ColumnccPortalTxRetriesOctets08 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 8 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.10 | ColumnccPortalTxRetriesOctets09 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 9 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.11 | ColumnccPortalTxRetriesOctets10 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 10 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.12 | ColumnccPortalTxRetriesOctets11 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 11 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.13 | ColumnccPortalTxRetriesOctets12 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 12 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.14 | ColumnccPortalTxRetriesOctets13 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 13 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.15 | ColumnccPortalTxRetriesOctets14 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 14 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.16 | ColumnccPortalTxRetriesOctets15 | read-only | current | Number of octets successfully transmitted via this Portal with exactly 15 retries. |
| 1.3.6.1.4.1.388.11.2.4.2.100.7.1.17 | ColumnccPortalTxRetriesOctetsFailed | read-only | current | Number of octets that never were successfully transmitted to via this Portal because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8 | TableccPortalSigStatsTable | not-accessible | current | This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each Portal on the switch. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1 | RowccPortalSigStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.1 | ColumnccPortalSigStatsNumPkts | read-only | current | Total packets received via the Portal included in all the other counters reported in this row. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.2 | ColumnccPortalSigStatsSignalBest | read-only | current | The best Signal value seen from the Portal so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.3 | ColumnccPortalSigStatsSignalWorst | read-only | current | The worst Signal value seen from the Portal so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.4 | ColumnccPortalSigStatsSignalSum | read-only | current | A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received via this Portal. Note that this value is normall… |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.5 | ColumnccPortalSigStatsSignalSumSquares | read-only | current | A sum of the squares of each Signal value calculated for packets received via this Portal. Unlike _SignalSum, this value is never negative, since the square of… |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.6 | ColumnccPortalSigStatsSignalMostRecent | read-only | current | The best Signal value seen from the Portal so far. (Remember that a -20dBm Signal is better than -60dBm). This value does not make sense when ccPortalSigStatsN… |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.7 | ColumnccPortalSigStatsNoiseBest | read-only | current | The best Noise value seen from the Portal so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.8 | ColumnccPortalSigStatsNoiseWorst | read-only | current | The worst Noise value seen from the Portal so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.9 | ColumnccPortalSigStatsNoiseSum | read-only | current | A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets received via this Portal. Like _SignalSum, this value is n… |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.10 | ColumnccPortalSigStatsNoiseSumSquares | read-only | current | A sum of the squares of each Noise value calculated for packets received via this Portal. As with _SignalSumSquares, this value is never negative. (This value … |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.11 | ColumnccPortalSigStatsNoiseMostRecent | read-only | current | The best Noise value seen from the Portal so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccPortalSigStatsNumPk… |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.12 | ColumnccPortalSigStatsSnrBest | read-only | current | The best SNR value seen from the Portal so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.13 | ColumnccPortalSigStatsSnrWorst | read-only | current | The worst SNR value seen from the Portal so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB. |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.14 | ColumnccPortalSigStatsSnrSum | read-only | current | A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received via this Portal. Unlike _Signal and _Noise, this va… |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.15 | ColumnccPortalSigStatsSnrSumSquares | read-only | current | A sum of the squares of each SNR value calculated for packets received via this Portal. This value is never negative. (This value can be used to calculate the … |
| 1.3.6.1.4.1.388.11.2.4.2.100.8.1.16 | ColumnccPortalSigStatsSnrMostRecent | read-only | current | The best SNR value seen from the Portal so far. (Remember that +30dBm SNR is better than +20dBm). This value does not make sense when ccPortalSigStatsNumPkts e… |
| 1.3.6.1.4.1.388.11.2.4.2.100.9 | TableccPortalSumStatsShortTable | not-accessible | current | Averages and rates calculated over the SHORT window for each Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1 | RowccPortalSumStatsShortEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.1 | ColumnccPortalSumStatsShortTimestamp | read-only | current | Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.2 | ColumnccPortalSumStatsShortNumPkts | read-only | current | The number of packets used to calculate the statistics in this window. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.3 | ColumnccPortalSumStatsShortPktsPerSec100 | read-only | current | Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).… |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.4 | ColumnccPortalSumStatsShortPktsPerSecTx100 | read-only | current | Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not c… |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.5 | ColumnccPortalSumStatsShortPktsPerSecRx100 | read-only | current | Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.6 | ColumnccPortalSumStatsShortThroughput | read-only | current | Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent … |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.7 | ColumnccPortalSumStatsShortThroughputTx | read-only | current | Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the numb… |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.8 | ColumnccPortalSumStatsShortThroughputRx | read-only | current | Actual number of bits RX over the window, divided by the number of seconds in the window. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.9 | ColumnccPortalSumStatsShortAvgBitSpeed | read-only | current | An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divi… |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.10 | ColumnccPortalSumStatsShortAvgMuSignal | read-only | current | The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.11 | ColumnccPortalSumStatsShortAvgMuNoise | read-only | current | The average of all noise values over the window. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.12 | ColumnccPortalSumStatsShortAvgMuSnr | read-only | current | The average of all SNR values over the window. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.13 | ColumnccPortalSumStatsShortPp10kNUcastPkts | read-only | current | Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.14 | ColumnccPortalSumStatsShortPp10kTxWithRetries | read-only | current | Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.15 | ColumnccPortalSumStatsShortPp10kTxMaxRetries | read-only | current | Ratio of TX packets that were dropped due to excessive. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.16 | ColumnccPortalSumStatsShortTxAvgRetries100 | read-only | current | For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max … |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.17 | ColumnccPortalSumStatsShortPp10kRxUndecrypt | read-only | current | Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.18 | ColumnccPortalSumStatsShortTotalMus | read-only | current | The total number of MUs associated to the given Portal. |
| 1.3.6.1.4.1.388.11.2.4.2.100.9.1.19 | ColumnccPortalSumStatsShortPp10kRfUtil | read-only | current | The approximate utilization of the Portal's RF port. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.2.100.10 | TableccPortalSumStatsLongTable | not-accessible | current | Averages and rates calculated over the LONG window for each Portal. (Refer to ccPortalSumStatsShortTable for descriptions). |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1 | RowccPortalSumStatsLongEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.1 | ColumnccPortalSumStatsLongTimestamp | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.2 | ColumnccPortalSumStatsLongNumPkts | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.3 | ColumnccPortalSumStatsLongPktsPerSec100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.4 | ColumnccPortalSumStatsLongPktsPerSecTx100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.5 | ColumnccPortalSumStatsLongPktsPerSecRx100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.6 | ColumnccPortalSumStatsLongThroughput | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.7 | ColumnccPortalSumStatsLongThroughputTx | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.8 | ColumnccPortalSumStatsLongThroughputRx | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.9 | ColumnccPortalSumStatsLongAvgBitSpeed | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.10 | ColumnccPortalSumStatsLongAvgMuSignal | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.11 | ColumnccPortalSumStatsLongAvgMuNoise | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.12 | ColumnccPortalSumStatsLongAvgMuSnr | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.13 | ColumnccPortalSumStatsLongPp10kNUcastPkts | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.14 | ColumnccPortalSumStatsLongPp10kTxWithRetries | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.15 | ColumnccPortalSumStatsLongPp10kTxMaxRetries | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.16 | ColumnccPortalSumStatsLongTxAvgRetries100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.17 | ColumnccPortalSumStatsLongPp10kRxUndecrypt | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.18 | ColumnccPortalSumStatsLongTotalMus | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.2.100.10.1.19 | ColumnccPortalSumStatsLongPp10kRfUtil | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.3 | NodeccAssociation | |||
| 1.3.6.1.4.1.388.11.2.4.3.1 | TableccAssociationTable | not-accessible | current | This table contains one entry for each Portal-MU association. |
| 1.3.6.1.4.1.388.11.2.4.3.1.1 | RowccAssociationEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.3.1.1.1 | ColumnccAssociationFirstAssociate | read-only | current | A snapshot of the switch's sysUpTime at the time of the first time this MU associated to this Portal. |
| 1.3.6.1.4.1.388.11.2.4.3.1.1.2 | ColumnccAssociationLastAssociate | read-only | current | A snapshot of the switch's sysUpTime at the time of the time this MU most recently associated to this Portal. |
| 1.3.6.1.4.1.388.11.2.4.3.1.1.3 | ColumnccAssociationCountAssociates | read-only | current | A count of the total number of times this MU has associated to this Portal. |
| 1.3.6.1.4.1.388.11.2.4.4 | NodeccMus | |||
| 1.3.6.1.4.1.388.11.2.4.4.1 | TableccMuInfoTable | not-accessible | current | This table describes general information about each MU serviced by the switch. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1 | RowccMuInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.1 | ColumnccMuMac | read-only | current | MAC address of the MU. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.2 | ColumnccMuWlanIndex | read-only | current | (Reserved for future implementation). |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.3 | ColumnccMuWlanName | read-only | current | The name of the WLAN this MU is associated to. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.4 | ColumnccMuIsDataReady | read-only | current | This value is true if the WS2000 is ready to forward/switch packets to/from this MU, (internally called the 'data ready' state). Otherwise this value is false. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.5 | ColumnccMuPortalIndex | read-only | current | The index of the entry in the PortalTable to which this MU is associated. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.6 | ColumnccMuPortalMac | read-only | current | The MAC address of the Portal to which this MU is associated. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.7 | ColumnccMuSymbolRogueApEna | read-only | current | If true, this MU supports Symbol's Rogue AP detection assist algorithm. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.8 | ColumnccMuIpAddr | read-only | current | IP address of the MU. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.9 | ColumnccMuType | read-only | current | Type of the MU. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.10 | ColumnccMuRadioType | read-only | current | Radio type of the MU. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.11 | ColumnccMuSupportedRates | read-only | current | A bit-mask of rates supported by this MU. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.12 | ColumnccMuPowerMode | read-only | current | Power-mode implemented by the MU. A MU's status will constantly switch between PSP and CAM mode when it is in PSP mode. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.13 | ColumnccMuAuthenticationMethod | read-only | current | Authentication method implemented by the MU. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.14 | ColumnccMuEncryptionMethod | read-only | current | Encryption method implemented by the MU. |
| 1.3.6.1.4.1.388.11.2.4.4.1.1.15 | ColumnccMuVlanId | read-only | current | The VLAN that this MU is assigned to. |
| 1.3.6.1.4.1.388.11.2.4.4.2 | TableccMuStatsTable | not-accessible | current | This table describes general statistics about packets sent/recieved via each MU serviced by the switch. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1 | RowccMuStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.1 | ColumnccMuTxPktsUcast | read-only | current | Count of unicast packets sent. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.2 | ColumnccMuRxPktsUcast | read-only | current | Count of unicast packets received. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.3 | ColumnccMuRxPktsNUcast | read-only | obsolete | Count of non-unicast (broadcast & multicast) packets received. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.4 | ColumnccMuTxOctetsUcast | read-only | current | Count of unicast octets sent. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.5 | ColumnccMuRxOctetsUcast | read-only | current | Count of unicast octets received. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.6 | ColumnccMuRxOctetsNUcast | read-only | obsolete | Count of non-unicast (broadcast & multicast) octets received. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.7 | ColumnccMuRxUndecryptablePkts | read-only | current | Count of packets received that could not be decrypted. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.8 | ColumnccMuRxRssiNumPkts | read-only | current | Total RSSI packets received. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.9 | ColumnccMuRxRssiSum | read-only | current | A running sum of all RSSI values calculated by the switch for packets. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.10 | ColumnccMuRxRssiSumSquares | read-only | current | A sum of the squares of each RSSI value calculated for packets received. This value is never negative. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.11 | ColumnccMuRxRssiMostRecent | read-only | current | The best RSSI value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccMuRxRssiNumPkts equals to 0. |
| 1.3.6.1.4.1.388.11.2.4.4.2.1.12 | ColumnccMuLastActivity | read-only | current | A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received). |
| 1.3.6.1.4.1.388.11.2.4.4.3 | TableccMuRxPktsTable | not-accessible | current | For each MU serviced by the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.4.3.1 | RowccMuRxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.1 | ColumnccMuRxPktsAt1Mb | read-only | current | Number of pkts received at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.2 | ColumnccMuRxPktsAt2Mb | read-only | current | Number of pkts received at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.3 | ColumnccMuRxPktsAt5pt5Mb | read-only | current | Number of pkts received at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.4 | ColumnccMuRxPktsAt6Mb | read-only | current | Number of pkts received at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.5 | ColumnccMuRxPktsAt9Mb | read-only | current | Number of pkts received at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.6 | ColumnccMuRxPktsAt11Mb | read-only | current | Number of pkts received at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.7 | ColumnccMuRxPktsAt12Mb | read-only | current | Number of pkts received at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.8 | ColumnccMuRxPktsAt18Mb | read-only | current | Number of pkts received at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.9 | ColumnccMuRxPktsAt22Mb | read-only | current | Number of pkts received at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.10 | ColumnccMuRxPktsAt24Mb | read-only | current | Number of pkts received at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.11 | ColumnccMuRxPktsAt36Mb | read-only | current | Number of pkts received at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.12 | ColumnccMuRxPktsAt48Mb | read-only | current | Number of pkts received at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.3.1.13 | ColumnccMuRxPktsAt54Mb | read-only | current | Number of pkts received at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4 | TableccMuTxPktsTable | not-accessible | current | For each MU serviced by the switch, this table describes counts of packets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.4.4.1 | RowccMuTxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.1 | ColumnccMuTxPktsAt1Mb | read-only | current | Number of pkts transmitted at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.2 | ColumnccMuTxPktsAt2Mb | read-only | current | Number of pkts transmitted at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.3 | ColumnccMuTxPktsAt5pt5Mb | read-only | current | Number of pkts transmitted at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.4 | ColumnccMuTxPktsAt6Mb | read-only | current | Number of pkts transmitted at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.5 | ColumnccMuTxPktsAt9Mb | read-only | current | Number of pkts transmitted at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.6 | ColumnccMuTxPktsAt11Mb | read-only | current | Number of pkts transmitted at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.7 | ColumnccMuTxPktsAt12Mb | read-only | current | Number of pkts transmitted at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.8 | ColumnccMuTxPktsAt18Mb | read-only | current | Number of pkts transmitted at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.9 | ColumnccMuTxPktsAt22Mb | read-only | current | Number of pkts transmitted at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.10 | ColumnccMuTxPktsAt24Mb | read-only | current | Number of pkts transmitted at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.11 | ColumnccMuTxPktsAt36Mb | read-only | current | Number of pkts transmitted at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.12 | ColumnccMuTxPktsAt48Mb | read-only | current | Number of pkts transmitted at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.4.1.13 | ColumnccMuTxPktsAt54Mb | read-only | current | Number of pkts transmitted at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5 | TableccMuRxOctetsTable | not-accessible | current | For each MU serviced by this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.4.5.1 | RowccMuRxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.1 | ColumnccMuRxOctetsAt1Mb | read-only | current | Number of octets received at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.2 | ColumnccMuRxOctetsAt2Mb | read-only | current | Number of octets received at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.3 | ColumnccMuRxOctetsAt5pt5Mb | read-only | current | Number of octets received at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.4 | ColumnccMuRxOctetsAt6Mb | read-only | current | Number of octets received at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.5 | ColumnccMuRxOctetsAt9Mb | read-only | current | Number of octets received at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.6 | ColumnccMuRxOctetsAt11Mb | read-only | current | Number of octets received at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.7 | ColumnccMuRxOctetsAt12Mb | read-only | current | Number of octets received at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.8 | ColumnccMuRxOctetsAt18Mb | read-only | current | Number of octets received at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.9 | ColumnccMuRxOctetsAt22Mb | read-only | current | Number of octets received at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.10 | ColumnccMuRxOctetsAt24Mb | read-only | current | Number of octets received at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.11 | ColumnccMuRxOctetsAt36Mb | read-only | current | Number of octets received at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.12 | ColumnccMuRxOctetsAt48Mb | read-only | current | Number of octets received at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.5.1.13 | ColumnccMuRxOctetsAt54Mb | read-only | current | Number of octets received at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6 | TableccMuTxOctetsTable | not-accessible | current | For each MU serviced by this switch, this table describes counts of octets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.4.6.1 | RowccMuTxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.1 | ColumnccMuTxOctetsAt1Mb | read-only | current | Number of octets transmitted at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.2 | ColumnccMuTxOctetsAt2Mb | read-only | current | Number of octets transmitted at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.3 | ColumnccMuTxOctetsAt5pt5Mb | read-only | current | Number of octets transmitted at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.4 | ColumnccMuTxOctetsAt6Mb | read-only | current | Number of octets transmitted at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.5 | ColumnccMuTxOctetsAt9Mb | read-only | current | Number of octets transmitted at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.6 | ColumnccMuTxOctetsAt11Mb | read-only | current | Number of octets transmitted at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.7 | ColumnccMuTxOctetsAt12Mb | read-only | current | Number of octets transmitted at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.8 | ColumnccMuTxOctetsAt18Mb | read-only | current | Number of octets transmitted at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.9 | ColumnccMuTxOctetsAt22Mb | read-only | current | Number of octets transmitted at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.10 | ColumnccMuTxOctetsAt24Mb | read-only | current | Number of octets transmitted at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.11 | ColumnccMuTxOctetsAt36Mb | read-only | current | Number of octets transmitted at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.12 | ColumnccMuTxOctetsAt48Mb | read-only | current | Number of octets transmitted at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.6.1.13 | ColumnccMuTxOctetsAt54Mb | read-only | current | Number of octets transmitted at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.4.7 | TableccMuTxRetriesTable | not-accessible | current | For each MU serviced by the switch, this table describes counts of the number of packets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave… |
| 1.3.6.1.4.1.388.11.2.4.4.7.1 | RowccMuTxRetriesEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.1 | ColumnccMuTxRetriesNone | read-only | current | Number of pkts successfully transmitted with no retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.2 | ColumnccMuTxRetries01 | read-only | current | Number of pkts successfully transmitted with exactly 1 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.3 | ColumnccMuTxRetries02 | read-only | current | Number of pkts successfully transmitted with exactly 2 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.4 | ColumnccMuTxRetries03 | read-only | current | Number of pkts successfully transmitted with exactly 3 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.5 | ColumnccMuTxRetries04 | read-only | current | Number of pkts successfully transmitted with exactly 4 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.6 | ColumnccMuTxRetries05 | read-only | current | Number of pkts successfully transmitted with exactly 5 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.7 | ColumnccMuTxRetries06 | read-only | current | Number of pkts successfully transmitted with exactly 6 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.8 | ColumnccMuTxRetries07 | read-only | current | Number of pkts successfully transmitted with exactly 7 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.9 | ColumnccMuTxRetries08 | read-only | current | Number of pkts successfully transmitted with exactly 8 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.10 | ColumnccMuTxRetries09 | read-only | current | Number of pkts successfully transmitted with exactly 9 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.11 | ColumnccMuTxRetries10 | read-only | current | Number of pkts successfully transmitted with exactly 10 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.12 | ColumnccMuTxRetries11 | read-only | current | Number of pkts successfully transmitted with exactly 11 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.13 | ColumnccMuTxRetries12 | read-only | current | Number of pkts successfully transmitted with exactly 12 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.14 | ColumnccMuTxRetries13 | read-only | current | Number of pkts successfully transmitted with exactly 13 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.15 | ColumnccMuTxRetries14 | read-only | current | Number of pkts successfully transmitted with exactly 14 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.16 | ColumnccMuTxRetries15 | read-only | current | Number of pkts successfully transmitted with exactly 15 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.17 | ColumnccMuTxRetriesFailed | read-only | current | Number of pkts that never were successfully transmitted to because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.18 | ColumnccMuTxRetriesTotal | read-only | current | A total sum of all retries across all packets sent to this MU. For example, if 4 packets have been sent, with the following number of retires: 2, 0, 5, gave-up… |
| 1.3.6.1.4.1.388.11.2.4.4.7.1.19 | ColumnccMuTxRetriesMostRecent | read-only | current | Most recent retry done by MU. |
| 1.3.6.1.4.1.388.11.2.4.4.8 | ScalarccMuLastMac | read-only | current | This scalar records the MAC address of the most recent MU to be Adopted, UnAdopted, or Denied. |
| 1.3.6.1.4.1.388.11.2.4.4.9 | ScalarccMuLastReason | read-only | current | This value notes the reason for the most-recent MU UnAdoption or Denial. Enum item associationFailed indicates that a key association field was missing, or a m… |
| 1.3.6.1.4.1.388.11.2.4.4.10 | ScalarccMuLastPortal | read-only | current | This value notes the reason for the most-recent MU UnAdoption or Denial. |
| 1.3.6.1.4.1.388.11.2.4.4.100 | NodeccMuRfSum | |||
| 1.3.6.1.4.1.388.11.2.4.4.100.1 | TableccMuTxRetriesOctetsTable | not-accessible | current | For each MU serviced by the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-… |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1 | RowccMuTxRetriesOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.1 | ColumnccMuTxRetriesOctetsNone | read-only | current | Number of octets successfully transmitted with no retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.2 | ColumnccMuTxRetriesOctets01 | read-only | current | Number of octets successfully transmitted with exactly 1 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.3 | ColumnccMuTxRetriesOctets02 | read-only | current | Number of octets successfully transmitted with exactly 2 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.4 | ColumnccMuTxRetriesOctets03 | read-only | current | Number of octets successfully transmitted with exactly 3 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.5 | ColumnccMuTxRetriesOctets04 | read-only | current | Number of octets successfully transmitted with exactly 4 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.6 | ColumnccMuTxRetriesOctets05 | read-only | current | Number of octets successfully transmitted with exactly 5 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.7 | ColumnccMuTxRetriesOctets06 | read-only | current | Number of octets successfully transmitted with exactly 6 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.8 | ColumnccMuTxRetriesOctets07 | read-only | current | Number of octets successfully transmitted with exactly 7 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.9 | ColumnccMuTxRetriesOctets08 | read-only | current | Number of octets successfully transmitted with exactly 8 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.10 | ColumnccMuTxRetriesOctets09 | read-only | current | Number of octets successfully transmitted with exactly 9 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.11 | ColumnccMuTxRetriesOctets10 | read-only | current | Number of octets successfully transmitted with exactly 10 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.12 | ColumnccMuTxRetriesOctets11 | read-only | current | Number of octets successfully transmitted with exactly 11 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.13 | ColumnccMuTxRetriesOctets12 | read-only | current | Number of octets successfully transmitted with exactly 12 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.14 | ColumnccMuTxRetriesOctets13 | read-only | current | Number of octets successfully transmitted with exactly 13 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.15 | ColumnccMuTxRetriesOctets14 | read-only | current | Number of octets successfully transmitted with exactly 14 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.16 | ColumnccMuTxRetriesOctets15 | read-only | current | Number of octets successfully transmitted with exactly 15 retries. |
| 1.3.6.1.4.1.388.11.2.4.4.100.1.1.17 | ColumnccMuTxRetriesOctetsFailed | read-only | current | Number of octets that never were successfully transmitted to because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2 | TableccMuSigStatsTable | not-accessible | current | This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each MU serviced by the switch. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1 | RowccMuSigStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.1 | ColumnccMuSigStatsNumPkts | read-only | current | Total packets received included in all the other counters reported in this row. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.2 | ColumnccMuSigStatsSignalBest | read-only | current | The best Signal value seen so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.3 | ColumnccMuSigStatsSignalWorst | read-only | current | The worst Signal value seen so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.4 | ColumnccMuSigStatsSignalSum | read-only | current | A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received. Note that this value is normally a negative val… |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.5 | ColumnccMuSigStatsSignalSumSquares | read-only | current | A sum of the squares of each Signal value calculated for packets received. Unlike _SignalSum, this value is never negative, since the square of a negative numb… |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.6 | ColumnccMuSigStatsSignalMostRecent | read-only | current | The best Signal value seen so far. (Remember that a -20dBm Signal is better than -60dBm). This value does not make sense when ccMuSigStatsNumPkts equals to 0. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.7 | ColumnccMuSigStatsNoiseBest | read-only | current | The best Noise value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.8 | ColumnccMuSigStatsNoiseWorst | read-only | current | The worst Noise value seen so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.9 | ColumnccMuSigStatsNoiseSum | read-only | current | A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets. Like _SignalSum, this value is normally a negative value. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.10 | ColumnccMuSigStatsNoiseSumSquares | read-only | current | A sum of the squares of each Noise value calculated for packets received. As with _SignalSumSquares, this value is never negative. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.11 | ColumnccMuSigStatsNoiseMostRecent | read-only | current | The best Noise value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccMuSigStatsNumPkts equals to 0. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.12 | ColumnccMuSigStatsSnrBest | read-only | current | The best SNR value seen so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.13 | ColumnccMuSigStatsSnrWorst | read-only | current | The worst SNR value seen so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.14 | ColumnccMuSigStatsSnrSum | read-only | current | A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received. Unlike _Signal and _Noise, this value is never neg… |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.15 | ColumnccMuSigStatsSnrSumSquares | read-only | current | A sum of the squares of each SNR value calculated for packets received. This value is never negative. |
| 1.3.6.1.4.1.388.11.2.4.4.100.2.1.16 | ColumnccMuSigStatsSnrMostRecent | read-only | current | The best SNR value seen so far. (Remember that +30dBm SNR is better than +20dBm). This value does not make sense when ccMuSigStatsNumPkts equals to 0. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3 | TableccMuSumStatsShortTable | not-accessible | current | Averages and rates calculated over the SHORT window for each MU. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1 | RowccMuSumStatsShortEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.1 | ColumnccMuSumStatsShortTimestamp | read-only | current | Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.2 | ColumnccMuSumStatsShortNumPkts | read-only | current | The number of packets used to calculate the statistics in this window. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.3 | ColumnccMuSumStatsShortPktsPerSec100 | read-only | current | Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).… |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.4 | ColumnccMuSumStatsShortPktsPerSecTx100 | read-only | current | Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not c… |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.5 | ColumnccMuSumStatsShortPktsPerSecRx100 | read-only | current | Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.6 | ColumnccMuSumStatsShortThroughput | read-only | current | Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent … |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.7 | ColumnccMuSumStatsShortThroughputTx | read-only | current | Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the numb… |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.8 | ColumnccMuSumStatsShortThroughputRx | read-only | current | Actual number of bits RX over the window, divided by the number of seconds in the window. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.9 | ColumnccMuSumStatsShortAvgBitSpeed | read-only | current | An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divi… |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.10 | ColumnccMuSumStatsShortAvgMuSignal | read-only | current | The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.11 | ColumnccMuSumStatsShortAvgMuNoise | read-only | current | The average of all noise values over the window. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.12 | ColumnccMuSumStatsShortAvgMuSnr | read-only | current | The average of all SNR values over the window. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.13 | ColumnccMuSumStatsShortPp10kNUcastPkts | read-only | current | Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.14 | ColumnccMuSumStatsShortPp10kTxWithRetries | read-only | current | Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.15 | ColumnccMuSumStatsShortPp10kDropped | read-only | current | Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packet… |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.16 | ColumnccMuSumStatsShortTxAvgRetries100 | read-only | current | For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max … |
| 1.3.6.1.4.1.388.11.2.4.4.100.3.1.17 | ColumnccMuSumStatsShortPp10kRxUndecrypt | read-only | current | Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.4.100.4 | TableccMuSumStatsLongTable | not-accessible | current | Averages and rates calculated over the LONG window for each MU. (Refer to ccMuSumStatsShortTable for descriptions). |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1 | RowccMuSumStatsLongEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.1 | ColumnccMuSumStatsLongTimestamp | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.2 | ColumnccMuSumStatsLongNumPkts | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.3 | ColumnccMuSumStatsLongPktsPerSec100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.4 | ColumnccMuSumStatsLongPktsPerSecTx100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.5 | ColumnccMuSumStatsLongPktsPerSecRx100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.6 | ColumnccMuSumStatsLongThroughput | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.7 | ColumnccMuSumStatsLongThroughputTx | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.8 | ColumnccMuSumStatsLongThroughputRx | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.9 | ColumnccMuSumStatsLongAvgBitSpeed | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.10 | ColumnccMuSumStatsLongAvgMuSignal | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.11 | ColumnccMuSumStatsLongAvgMuNoise | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.12 | ColumnccMuSumStatsLongAvgMuSnr | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.13 | ColumnccMuSumStatsLongPp10kNUcastPkts | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.14 | ColumnccMuSumStatsLongPp10kTxWithRetries | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.15 | ColumnccMuSumStatsLongPp10kDropped | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.16 | ColumnccMuSumStatsLongTxAvgRetries100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.4.100.4.1.17 | ColumnccMuSumStatsLongPp10kRxUndecrypt | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5 | NodeccWlan | |||
| 1.3.6.1.4.1.388.11.2.4.5.1 | TableccWlanTable | not-accessible | current | Table of wireless LANs configured on the switch. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1 | RowccWlanEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.1 | ColumnccWlanIndex | accessible-for-notify | current | Simple index. (In the ccRfSum tables, entry 1001 is used to represent the roll-up of all RF communications on this switch). |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.2 | ColumnccWlanName | read-write | current | Name of the WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.3 | ColumnccWlanEssid | read-write | current | ESSID of the WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.4 | ColumnccWlanSubnet | read-write | current | The subnet/LAN this WLAN is associated with. If not associated with any subnet/LAN, this value will be 0. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.5 | ColumnccWlanPortalsAdopted | read-only | current | Pointer to portal(s) adopted by this WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.6 | ColumnccWlanEnable | read-write | current | Row enable. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.7 | ColumnccWlanDisallowMuToMu | read-write | current | Set to true to prohibit MU-to-MU communication. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.8 | ColumnccWlanVoicePrioritization | read-write | current | Enable voice prioritization. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.9 | ColumnccWlanAnswerBroadcastEss | read-write | current | Answer broadcast ESS. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.10 | ColumnccWlanMulticastAddr1 | read-write | current | Multicast address 1. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.11 | ColumnccWlanMulticastAddr2 | read-write | current | Multicast address 2. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.12 | ColumnccWlanMuAclDefault | read-write | current | Describes the default behavior if none of this WLAN's ccWlanMuAclTable entries match the MAC address of an MU attempting to associate with this WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.13 | ColumnccWlanAuthentication | read-write | current | If auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the ccWlanAuthEapTable. Likewise, if authKerberos, use the se… |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.14 | ColumnccWlanEncryption | read-write | current | If cryptoWep40 or cryptoWep128, additional WEP settings for this WLAN will be used from the matching entry in the ccWlanCryptoWepTable. Likewise, if cryptoWpaT… |
| 1.3.6.1.4.1.388.11.2.4.5.1.1.15 | ColumnccWlanWeight | read-write | current | The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100. |
| 1.3.6.1.4.1.388.11.2.4.5.2 | NodeccWlanAuth | |||
| 1.3.6.1.4.1.388.11.2.4.5.2.1 | TableccWlanAuthEapTable | not-accessible | current | Table of EAP authentication settings for each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1 | RowccWlanAuthEapEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.1 | ColumnccWlanAuthEapReauthenticationEnable | read-write | current | Enable reauthentication. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.2 | ColumnccWlanAuthEapReauthenticationPeriod | read-write | current | Reauthentication period. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.3 | ColumnccWlanAuthEapReauthenticationMaxRetries | read-write | current | Reauthentication max retries. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.4 | ColumnccWlanAuthEapRadius1Server | read-write | current | IP address of the primary RADIUS server. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.5 | ColumnccWlanAuthEapRadius1Port | read-write | current | Port number of the primary RADIUS server. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.6 | ColumnccWlanAuthEapRadius1SharedSecret | read-write | current | Shared secret of the primary RADIUS server. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.7 | ColumnccWlanAuthEapRadius2Server | read-write | current | IP address of the secondary RADIUS server. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.8 | ColumnccWlanAuthEapRadius2Port | read-write | current | Port number of the secondary RADIUS server. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.9 | ColumnccWlanAuthEapRadius2SharedSecret | read-write | current | Shared secret of the secondary RADIUS server. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.10 | ColumnccWlanAuthEapMuQuietPeriod | read-write | current | MU quiet period. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.11 | ColumnccWlanAuthEapMuTimeout | read-write | current | MU timeout. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.12 | ColumnccWlanAuthEapMuTxPeriod | read-write | current | MU Tx period. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.13 | ColumnccWlanAuthEapMuMaxRetries | read-write | current | MU max retries. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.14 | ColumnccWlanAuthEapServerTimeout | read-write | current | Server timeout. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.15 | ColumnccWlanAuthEapServerMaxRetries | read-write | current | Server max retries. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.16 | ColumnccWlanAuthEapRadiusAcctMode | read-write | current | Radius Accounting Mode. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.17 | ColumnccWlanAuthEapRadiusAcctMuTimeout | read-write | current | Radius Accounting MU Timeout. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.18 | ColumnccWlanAuthEapRadiusAcctMuRetries | read-write | current | Radius Accounting MU Retries. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.19 | ColumnccWlanAuthEapSyslogMode | read-write | current | Logging Mode. |
| 1.3.6.1.4.1.388.11.2.4.5.2.1.1.20 | ColumnccWlanAuthEapSyslogSeverIp | read-write | current | Syslog Server IP Address. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2 | TableccWlanAuthKerberosTable | not-accessible | current | Table of Kerberos authentication settings for each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1 | RowccWlanAuthKerberosEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.1 | ColumnccWlanAuthKerberosRealmName | read-write | current | Realm name. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.2 | ColumnccWlanAuthKerberosUsername | read-write | current | Username. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.3 | ColumnccWlanAuthKerberosPassword | read-write | current | Password. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.4 | ColumnccWlanAuthKerberosKdcServerIp1 | read-write | current | Primary KDC server IP addr. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.5 | ColumnccWlanAuthKerberosKdcPort1 | read-write | current | Primary KDC port. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.6 | ColumnccWlanAuthKerberosKdcServerIp2 | read-write | current | Backup KDC server IP addr. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.7 | ColumnccWlanAuthKerberosKdcPort2 | read-write | current | Backup KDC port. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.8 | ColumnccWlanAuthKerberosKdcServerIpR | read-write | current | Remote KDC server IP addr. |
| 1.3.6.1.4.1.388.11.2.4.5.2.2.1.9 | ColumnccWlanAuthKerberosKdcPortR | read-write | current | Remote KDC port. |
| 1.3.6.1.4.1.388.11.2.4.5.3 | NodeccWlanCrypto | |||
| 1.3.6.1.4.1.388.11.2.4.5.3.1 | TableccWlanCryptoWepTable | not-accessible | current | Table of WEP encryption settings for each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.3.1.1 | RowccWlanCryptoWepEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.3.1.1.1 | ColumnccWlanCryptoWepPassKey | read-write | current | Pass key. If this value is written, the four WepKey1..4 will be overwritten. |
| 1.3.6.1.4.1.388.11.2.4.5.3.1.1.2 | ColumnccWlanCryptoWepKey1 | read-write | current | WEP key #1 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key). |
| 1.3.6.1.4.1.388.11.2.4.5.3.1.1.3 | ColumnccWlanCryptoWepKey2 | read-write | current | WEP key #2 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key). |
| 1.3.6.1.4.1.388.11.2.4.5.3.1.1.4 | ColumnccWlanCryptoWepKey3 | read-write | current | WEP key #3 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key). |
| 1.3.6.1.4.1.388.11.2.4.5.3.1.1.5 | ColumnccWlanCryptoWepKey4 | read-write | current | WEP key #4 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key). |
| 1.3.6.1.4.1.388.11.2.4.5.3.1.1.6 | ColumnccWlanCryptoWepKeyToUse | read-write | current | Specifies which WEP key to use. |
| 1.3.6.1.4.1.388.11.2.4.5.3.2 | TableccWlanCryptoWpaTable | not-accessible | current | Table of WPA-TKIP encryption settings for each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.3.2.1 | RowccWlanCryptoWpaEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.3.2.1.1 | ColumnccWlanCryptoWpaBcastKeyRotation | read-write | current | Use broadcast key rotation. |
| 1.3.6.1.4.1.388.11.2.4.5.3.2.1.2 | ColumnccWlanCryptoWpaKeyRotationInterval | read-write | current | Broadcast key rotation, (if enabled), occurs every this many seconds. |
| 1.3.6.1.4.1.388.11.2.4.5.3.2.1.3 | ColumnccWlanCryptoWpaKeyToUse | read-write | current | Specifies which key to use. |
| 1.3.6.1.4.1.388.11.2.4.5.3.2.1.4 | ColumnccWlanCryptoWpaPassphrase | read-write | current | Passphrase. |
| 1.3.6.1.4.1.388.11.2.4.5.3.2.1.5 | ColumnccWlanCryptoWpaKey | read-write | current | Key. |
| 1.3.6.1.4.1.388.11.2.4.5.3.3 | TableccWlanCryptoKeyguardTable | not-accessible | current | Table of KeyGuard-MCM encryption settings for each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.3.3.1 | RowccWlanCryptoKeyguardEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.3.3.1.1 | ColumnccWlanCryptoKeyguardPasskey | read-write | current | Pass key. |
| 1.3.6.1.4.1.388.11.2.4.5.3.3.1.2 | ColumnccWlanCryptoKeyguardKey1 | read-write | current | Key #1. |
| 1.3.6.1.4.1.388.11.2.4.5.3.3.1.3 | ColumnccWlanCryptoKeyguardKey2 | read-write | current | Key #2. |
| 1.3.6.1.4.1.388.11.2.4.5.3.3.1.4 | ColumnccWlanCryptoKeyguardKey3 | read-write | current | Key #3. |
| 1.3.6.1.4.1.388.11.2.4.5.3.3.1.5 | ColumnccWlanCryptoKeyguardKey4 | read-write | current | Key #4. |
| 1.3.6.1.4.1.388.11.2.4.5.3.3.1.6 | ColumnccWlanCryptoKeyguardKeyToUse | read-write | current | Specifies which WEP key to use. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4 | TableccWlanCryptoWpaTwoTable | not-accessible | current | Table of WPA-CCMP encryption settings for each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1 | RowccWlanCryptoWpaTwoEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.1 | ColumnccWlanCryptoWpaTwoBcastKeyRotation | read-write | current | Use broadcast key rotation. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.2 | ColumnccWlanCryptoWpaTwoKeyRotationInterval | read-write | current | Broadcast key rotation, (if enabled), occurs every this many seconds. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.3 | ColumnccWlanCryptoWpaTwoKeyToUse | read-write | current | Specifies which key to use. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.4 | ColumnccWlanCryptoWpaTwoPassphrase | read-write | current | Passphrase. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.5 | ColumnccWlanCryptoWpaTwoKey | read-write | current | Key. |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.6 | ColumnccWlanCryptoWpaTwoAllowTkipClient | read-write | current | WPA2-CCMP Mixed Mode enables WPA2-CCMP and WPA-TKIP Clients to operate simultaneously on the network. Enabling this option allows backwards compatiblity for cl… |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.7 | ColumnccWlanCryptoWpaTwoFastRoamPreAuth | read-write | current | Enabling this option enables a client associated with one Access Port to carry out an 802.1x authentication with another Access Port before it roams over to it… |
| 1.3.6.1.4.1.388.11.2.4.5.3.4.1.8 | ColumnccWlanCryptoWpaTwoFastRoamKeyCache | read-write | current | This option enables the WS2000 to use a Pairwise Master Key (PMK) derived with a client on one Access Port, with the same client when it roams over to another … |
| 1.3.6.1.4.1.388.11.2.4.5.4 | TableccWlanMuAclTable | not-accessible | current | Table describing ACLs for allowing or denying, (depending on default behavior for the WLAN specified in ccWlanMuAclDefault), MU association with each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.4.1 | RowccWlanMuAclEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.4.1.1 | ColumnccWlanMuAclIndex | accessible-for-notify | current | Simple index. |
| 1.3.6.1.4.1.388.11.2.4.5.4.1.2 | ColumnccWlanMuAclStartingMac | read-write | current | Starting MAC address in a range of addresses. |
| 1.3.6.1.4.1.388.11.2.4.5.4.1.3 | ColumnccWlanMuAclEndingMac | read-write | current | Ending MAC address in a range of addresses. |
| 1.3.6.1.4.1.388.11.2.4.5.4.1.4 | ColumnccWlanMuAclRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.388.11.2.4.5.5 | ScalarccWlanBwShareMode | read-write | current | This variable configures the manner in which bandwidth is shared among the WLANs. Only in mode 'weightedRoundRobin' are the ccWlanWeight values for each WLAN u… |
| 1.3.6.1.4.1.388.11.2.4.5.6 | TableccWlanQosMonitorTable | not-accessible | current | Table of QOS values. |
| 1.3.6.1.4.1.388.11.2.4.5.6.1 | RowccWlanQosMonitorEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.4.5.6.1.1 | ColumnccWlanQosMonitorSent | read-only | current | Packets Sent. |
| 1.3.6.1.4.1.388.11.2.4.5.6.1.2 | ColumnccWlanQosMonitorDropped | read-only | current | Packets Dropped. |
| 1.3.6.1.4.1.388.11.2.4.5.100 | NodeccWlanRfSum | |||
| 1.3.6.1.4.1.388.11.2.4.5.100.1 | TableccWlanStatsTable | not-accessible | current | This table describes general statistics about packets sent/recieved via each WLAN on the switch. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1 | RowccWlanStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.1 | ColumnccWlanTxPktsUcast | read-only | current | Count of unicast packets sent. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.2 | ColumnccWlanRxPktsUcast | read-only | current | Count of unicast packets received. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.3 | ColumnccWlanRxPktsNUcast | read-only | current | Count of non-unicast (broadcast & multicast) packets received. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.4 | ColumnccWlanTxOctetsUcast | read-only | current | Count of unicast octets sent. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.5 | ColumnccWlanRxOctetsUcast | read-only | current | Count of unicast octets received. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.6 | ColumnccWlanRxOctetsNUcast | read-only | current | Count of non-unicast (broadcast & multicast) octets received. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.7 | ColumnccWlanRxUndecryptablePkts | read-only | current | Count of packets received that could not be decrypted. |
| 1.3.6.1.4.1.388.11.2.4.5.100.1.1.8 | ColumnccWlanLastActivity | read-only | current | A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received). |
| 1.3.6.1.4.1.388.11.2.4.5.100.2 | TableccWlanRxPktsTable | not-accessible | current | For each WLAN on the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1 | RowccWlanRxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.1 | ColumnccWlanRxPktsAt1Mb | read-only | current | Number of pkts received at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.2 | ColumnccWlanRxPktsAt2Mb | read-only | current | Number of pkts received at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.3 | ColumnccWlanRxPktsAt5pt5Mb | read-only | current | Number of pkts received at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.4 | ColumnccWlanRxPktsAt6Mb | read-only | current | Number of pkts received at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.5 | ColumnccWlanRxPktsAt9Mb | read-only | current | Number of pkts received at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.6 | ColumnccWlanRxPktsAt11Mb | read-only | current | Number of pkts received at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.7 | ColumnccWlanRxPktsAt12Mb | read-only | current | Number of pkts received at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.8 | ColumnccWlanRxPktsAt18Mb | read-only | current | Number of pkts received at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.9 | ColumnccWlanRxPktsAt22Mb | read-only | current | Number of pkts received at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.10 | ColumnccWlanRxPktsAt24Mb | read-only | current | Number of pkts received at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.11 | ColumnccWlanRxPktsAt36Mb | read-only | current | Number of pkts received at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.12 | ColumnccWlanRxPktsAt48Mb | read-only | current | Number of pkts received at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.2.1.13 | ColumnccWlanRxPktsAt54Mb | read-only | current | Number of pkts received at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3 | TableccWlanTxPktsTable | not-accessible | current | For each MU serviced by the switch, this table describes counts of packets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1 | RowccWlanTxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.1 | ColumnccWlanTxPktsAt1Mb | read-only | current | Number of pkts transmitted at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.2 | ColumnccWlanTxPktsAt2Mb | read-only | current | Number of pkts transmitted at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.3 | ColumnccWlanTxPktsAt5pt5Mb | read-only | current | Number of pkts transmitted at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.4 | ColumnccWlanTxPktsAt6Mb | read-only | current | Number of pkts transmitted at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.5 | ColumnccWlanTxPktsAt9Mb | read-only | current | Number of pkts transmitted at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.6 | ColumnccWlanTxPktsAt11Mb | read-only | current | Number of pkts transmitted at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.7 | ColumnccWlanTxPktsAt12Mb | read-only | current | Number of pkts transmitted at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.8 | ColumnccWlanTxPktsAt18Mb | read-only | current | Number of pkts transmitted at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.9 | ColumnccWlanTxPktsAt22Mb | read-only | current | Number of pkts transmitted at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.10 | ColumnccWlanTxPktsAt24Mb | read-only | current | Number of pkts transmitted at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.11 | ColumnccWlanTxPktsAt36Mb | read-only | current | Number of pkts transmitted at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.12 | ColumnccWlanTxPktsAt48Mb | read-only | current | Number of pkts transmitted at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.3.1.13 | ColumnccWlanTxPktsAt54Mb | read-only | current | Number of pkts transmitted at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4 | TableccWlanRxOctetsTable | not-accessible | current | For each MU serviced by this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1 | RowccWlanRxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.1 | ColumnccWlanRxOctetsAt1Mb | read-only | current | Number of octets received at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.2 | ColumnccWlanRxOctetsAt2Mb | read-only | current | Number of octets received at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.3 | ColumnccWlanRxOctetsAt5pt5Mb | read-only | current | Number of octets received at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.4 | ColumnccWlanRxOctetsAt6Mb | read-only | current | Number of octets received at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.5 | ColumnccWlanRxOctetsAt9Mb | read-only | current | Number of octets received at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.6 | ColumnccWlanRxOctetsAt11Mb | read-only | current | Number of octets received at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.7 | ColumnccWlanRxOctetsAt12Mb | read-only | current | Number of octets received at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.8 | ColumnccWlanRxOctetsAt18Mb | read-only | current | Number of octets received at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.9 | ColumnccWlanRxOctetsAt22Mb | read-only | current | Number of octets received at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.10 | ColumnccWlanRxOctetsAt24Mb | read-only | current | Number of octets received at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.11 | ColumnccWlanRxOctetsAt36Mb | read-only | current | Number of octets received at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.12 | ColumnccWlanRxOctetsAt48Mb | read-only | current | Number of octets received at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.4.1.13 | ColumnccWlanRxOctetsAt54Mb | read-only | current | Number of octets received at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5 | TableccWlanTxOctetsTable | not-accessible | current | For each WLAN on this switch, this table describes counts of octets transmitted at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1 | RowccWlanTxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.1 | ColumnccWlanTxOctetsAt1Mb | read-only | current | Number of octets transmitted at 1 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.2 | ColumnccWlanTxOctetsAt2Mb | read-only | current | Number of octets transmitted at 2 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.3 | ColumnccWlanTxOctetsAt5pt5Mb | read-only | current | Number of octets transmitted at 5.5 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.4 | ColumnccWlanTxOctetsAt6Mb | read-only | current | Number of octets transmitted at 6 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.5 | ColumnccWlanTxOctetsAt9Mb | read-only | current | Number of octets transmitted at 9 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.6 | ColumnccWlanTxOctetsAt11Mb | read-only | current | Number of octets transmitted at 11 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.7 | ColumnccWlanTxOctetsAt12Mb | read-only | current | Number of octets transmitted at 12 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.8 | ColumnccWlanTxOctetsAt18Mb | read-only | current | Number of octets transmitted at 18 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.9 | ColumnccWlanTxOctetsAt22Mb | read-only | current | Number of octets transmitted at 22 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.10 | ColumnccWlanTxOctetsAt24Mb | read-only | current | Number of octets transmitted at 24 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.11 | ColumnccWlanTxOctetsAt36Mb | read-only | current | Number of octets transmitted at 36 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.12 | ColumnccWlanTxOctetsAt48Mb | read-only | current | Number of octets transmitted at 48 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.5.1.13 | ColumnccWlanTxOctetsAt54Mb | read-only | current | Number of octets transmitted at 54 Mb. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6 | TableccWlanTxRetriesPktsTable | not-accessible | current | For each WLAN on the switch, this table describes counts of the number of packets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1 | RowccWlanTxRetriesPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.1 | ColumnccWlanTxRetriesPktsNone | read-only | current | Number of pkts successfully transmitted with no retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.2 | ColumnccWlanTxRetriesPkts01 | read-only | current | Number of pkts successfully transmitted with exactly 1 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.3 | ColumnccWlanTxRetriesPkts02 | read-only | current | Number of pkts successfully transmitted with exactly 2 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.4 | ColumnccWlanTxRetriesPkts03 | read-only | current | Number of pkts successfully transmitted with exactly 3 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.5 | ColumnccWlanTxRetriesPkts04 | read-only | current | Number of pkts successfully transmitted with exactly 4 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.6 | ColumnccWlanTxRetriesPkts05 | read-only | current | Number of pkts successfully transmitted with exactly 5 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.7 | ColumnccWlanTxRetriesPkts06 | read-only | current | Number of pkts successfully transmitted with exactly 6 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.8 | ColumnccWlanTxRetriesPkts07 | read-only | current | Number of pkts successfully transmitted with exactly 7 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.9 | ColumnccWlanTxRetriesPkts08 | read-only | current | Number of pkts successfully transmitted with exactly 8 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.10 | ColumnccWlanTxRetriesPkts09 | read-only | current | Number of pkts successfully transmitted with exactly 9 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.11 | ColumnccWlanTxRetriesPkts10 | read-only | current | Number of pkts successfully transmitted with exactly 10 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.12 | ColumnccWlanTxRetriesPkts11 | read-only | current | Number of pkts successfully transmitted with exactly 11 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.13 | ColumnccWlanTxRetriesPkts12 | read-only | current | Number of pkts successfully transmitted with exactly 12 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.14 | ColumnccWlanTxRetriesPkts13 | read-only | current | Number of pkts successfully transmitted with exactly 13 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.15 | ColumnccWlanTxRetriesPkts14 | read-only | current | Number of pkts successfully transmitted with exactly 14 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.16 | ColumnccWlanTxRetriesPkts15 | read-only | current | Number of pkts successfully transmitted with exactly 15 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.6.1.17 | ColumnccWlanTxRetriesPktsFailed | read-only | current | Number of pkts that never were successfully transmitted to because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7 | TableccWlanTxRetriesOctetsTable | not-accessible | current | For each WLAN on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1 | RowccWlanTxRetriesOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.1 | ColumnccWlanTxRetriesOctetsNone | read-only | current | Number of octets successfully transmitted with no retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.2 | ColumnccWlanTxRetriesOctets01 | read-only | current | Number of octets successfully transmitted with exactly 1 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.3 | ColumnccWlanTxRetriesOctets02 | read-only | current | Number of octets successfully transmitted with exactly 2 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.4 | ColumnccWlanTxRetriesOctets03 | read-only | current | Number of octets successfully transmitted with exactly 3 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.5 | ColumnccWlanTxRetriesOctets04 | read-only | current | Number of octets successfully transmitted with exactly 4 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.6 | ColumnccWlanTxRetriesOctets05 | read-only | current | Number of octets successfully transmitted with exactly 5 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.7 | ColumnccWlanTxRetriesOctets06 | read-only | current | Number of octets successfully transmitted with exactly 6 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.8 | ColumnccWlanTxRetriesOctets07 | read-only | current | Number of octets successfully transmitted with exactly 7 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.9 | ColumnccWlanTxRetriesOctets08 | read-only | current | Number of octets successfully transmitted with exactly 8 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.10 | ColumnccWlanTxRetriesOctets09 | read-only | current | Number of octets successfully transmitted with exactly 9 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.11 | ColumnccWlanTxRetriesOctets10 | read-only | current | Number of octets successfully transmitted with exactly 10 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.12 | ColumnccWlanTxRetriesOctets11 | read-only | current | Number of octets successfully transmitted with exactly 11 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.13 | ColumnccWlanTxRetriesOctets12 | read-only | current | Number of octets successfully transmitted with exactly 12 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.14 | ColumnccWlanTxRetriesOctets13 | read-only | current | Number of octets successfully transmitted with exactly 13 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.15 | ColumnccWlanTxRetriesOctets14 | read-only | current | Number of octets successfully transmitted with exactly 14 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.16 | ColumnccWlanTxRetriesOctets15 | read-only | current | Number of octets successfully transmitted with exactly 15 retries. |
| 1.3.6.1.4.1.388.11.2.4.5.100.7.1.17 | ColumnccWlanTxRetriesOctetsFailed | read-only | current | Number of octets that never were successfully transmitted to because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8 | TableccWlanSigStatsTable | not-accessible | current | This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each WLAN on the switch. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1 | RowccWlanSigStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.1 | ColumnccWlanSigStatsNumPkts | read-only | current | Total packets received included in all the other counters reported in this row. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.2 | ColumnccWlanSigStatsSignalBest | read-only | current | The best Signal value seen so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.3 | ColumnccWlanSigStatsSignalWorst | read-only | current | The worst Signal value seen so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.4 | ColumnccWlanSigStatsSignalSum | read-only | current | A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received. Note that this value is normally a negative val… |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.5 | ColumnccWlanSigStatsSignalSumSquares | read-only | current | A sum of the squares of each Signal value calculated for packets received. Unlike _SignalSum, this value is never negative, since the square of a negative numb… |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.6 | ColumnccWlanSigStatsNoiseBest | read-only | current | The best Noise value seen so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.7 | ColumnccWlanSigStatsNoiseWorst | read-only | current | The worst Noise value seen so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.8 | ColumnccWlanSigStatsNoiseSum | read-only | current | A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets. Like _SignalSum, this value is normally a negative value. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.9 | ColumnccWlanSigStatsNoiseSumSquares | read-only | current | A sum of the squares of each Noise value calculated for packets received. As with _SignalSumSquares, this value is never negative. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.10 | ColumnccWlanSigStatsSnrBest | read-only | current | The best SNR value seen so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.11 | ColumnccWlanSigStatsSnrWorst | read-only | current | The worst SNR value seen so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB. |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.12 | ColumnccWlanSigStatsSnrSum | read-only | current | A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received. Unlike _Signal and _Noise, this value is never neg… |
| 1.3.6.1.4.1.388.11.2.4.5.100.8.1.13 | ColumnccWlanSigStatsSnrSumSquares | read-only | current | A sum of the squares of each SNR value calculated for packets received. This value is never negative. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9 | TableccWlanSumStatsShortTable | not-accessible | current | Averages and rates calculated over the SHORT window for each WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1 | RowccWlanSumStatsShortEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.1 | ColumnccWlanSumStatsShortTimestamp | read-only | current | Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.2 | ColumnccWlanSumStatsShortNumPkts | read-only | current | The number of packets used to calculate the statistics in this window. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.3 | ColumnccWlanSumStatsShortPktsPerSec100 | read-only | current | Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).… |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.4 | ColumnccWlanSumStatsShortPktsPerSecTx100 | read-only | current | Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not c… |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.5 | ColumnccWlanSumStatsShortPktsPerSecRx100 | read-only | current | Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.6 | ColumnccWlanSumStatsShortThroughput | read-only | current | Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent … |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.7 | ColumnccWlanSumStatsShortThroughputTx | read-only | current | Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the numb… |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.8 | ColumnccWlanSumStatsShortThroughputRx | read-only | current | Actual number of bits RX over the window, divided by the number of seconds in the window. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.9 | ColumnccWlanSumStatsShortAvgBitSpeed | read-only | current | An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divi… |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.10 | ColumnccWlanSumStatsShortAvgMuSignal | read-only | current | The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.11 | ColumnccWlanSumStatsShortAvgMuNoise | read-only | current | The average of all noise values over the window. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.12 | ColumnccWlanSumStatsShortAvgMuSnr | read-only | current | The average of all SNR values over the window. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.13 | ColumnccWlanSumStatsShortPp10kNUcastPkts | read-only | current | Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.14 | ColumnccWlanSumStatsShortPp10kTxWithRetries | read-only | current | Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.15 | ColumnccWlanSumStatsShortPp10kDropped | read-only | current | Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packet… |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.16 | ColumnccWlanSumStatsShortTxAvgRetries100 | read-only | current | For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max … |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.17 | ColumnccWlanSumStatsShortPp10kRxUndecrypt | read-only | current | Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.18 | ColumnccWlanSumStatsShortTotalMus | read-only | current | The number of packets used to calculate the statistics in this window for all MUs associated with WLAN. |
| 1.3.6.1.4.1.388.11.2.4.5.100.9.1.19 | ColumnccWlanSumStatsShortSkip1 | read-write | obsolete | Not relevant for WS2000 2.0. |
| 1.3.6.1.4.1.388.11.2.4.5.100.10 | TableccWlanSumStatsLongTable | not-accessible | current | Averages and rates calculated over the LONG window for each WLAN. (Refer to ccWlanSumStatsShortTable for descriptions). |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1 | RowccWlanSumStatsLongEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.1 | ColumnccWlanSumStatsLongTimestamp | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.2 | ColumnccWlanSumStatsLongNumPkts | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.3 | ColumnccWlanSumStatsLongPktsPerSec100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.4 | ColumnccWlanSumStatsLongPktsPerSecTx100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.5 | ColumnccWlanSumStatsLongPktsPerSecRx100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.6 | ColumnccWlanSumStatsLongThroughput | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.7 | ColumnccWlanSumStatsLongThroughputTx | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.8 | ColumnccWlanSumStatsLongThroughputRx | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.9 | ColumnccWlanSumStatsLongAvgBitSpeed | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.10 | ColumnccWlanSumStatsLongAvgMuSignal | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.11 | ColumnccWlanSumStatsLongAvgMuNoise | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.12 | ColumnccWlanSumStatsLongAvgMuSnr | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.13 | ColumnccWlanSumStatsLongPp10kNUcastPkts | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.14 | ColumnccWlanSumStatsLongPp10kTxWithRetries | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.15 | ColumnccWlanSumStatsLongPp10kDropped | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.16 | ColumnccWlanSumStatsLongTxAvgRetries100 | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.17 | ColumnccWlanSumStatsLongPp10kRxUndecrypt | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.18 | ColumnccWlanSumStatsLongTotalMus | read-only | current | |
| 1.3.6.1.4.1.388.11.2.4.5.100.10.1.19 | ColumnccWlanSumStatsLongSkip1 | read-write | obsolete | Description. |
| 1.3.6.1.4.1.388.11.2.5 | NodeccSwitch | |||
| 1.3.6.1.4.1.388.11.2.5.1 | NodeccWan | |||
| 1.3.6.1.4.1.388.11.2.5.1.1 | TableccWanTable | not-accessible | current | Table of WAN interfaces. There is only one WAN interface on the WS2000, but we show the WAN interface in a table for consistancy and to have an entry to point … |
| 1.3.6.1.4.1.388.11.2.5.1.1.1 | RowccWanEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.1 | ColumnccWanIndex | accessible-for-notify | current | Simple index. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.2 | ColumnccWanDhcpEnable | read-write | current | Enable DHCP on this WAN interface. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.3 | ColumnccWanDhcpIpAddr | read-only | current | The IP address obtained via DHCP. If DHCP is disabled or if DHCP has not yet obtained values, this value will be 0.0.0.0. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.4 | ColumnccWanDhcpSubnetMask | read-only | current | The subnet mask address obtained via DHCP. If DHCP is disabled or if DHCP has not yet obtained values, this value will be 0.0.0.0. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.5 | ColumnccWanDhcpDefaultGateway | read-only | current | The default gateway obtained via DHCP. If DHCP is disabled or if DHCP has not yet obtained values, this value will be 0.0.0.0. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.6 | ColumnccWanDhcpPrimaryDnsServer | read-only | current | The primary DNS server obtained via DHCP. If DHCP is disabled or if DHCP has not yet obtained values, this value will be 0.0.0.0. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.7 | ColumnccWanDhcpSecondaryDnsServer | read-only | current | The secondary DNS server obtained via DHCP. If DHCP is disabled or if DHCP has not yet obtained values, this value will be 0.0.0.0. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.8 | ColumnccWanSubnetMask | read-write | current | The subnet mask to use if DHCP is not enabled. If DHCP is enabled, this value is still writeable, but is not used. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.9 | ColumnccWanDefaultGateway | read-write | current | The default gateway to use if DHCP is not enabled. If DHCP is enabled, this value is still writeable, but is not used. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.10 | ColumnccWanPrimaryDnsServer | read-write | current | The primary DNS server to use if DHCP is not enabled. If DHCP is enabled, this value is still writeable, but is not used. |
| 1.3.6.1.4.1.388.11.2.5.1.1.1.11 | ColumnccWanSecondaryDnsServer | read-write | current | The secondary DNS server to use if DHCP is not enabled. If DHCP is enabled, this value is still writeable, but is not used. |
| 1.3.6.1.4.1.388.11.2.5.1.2 | TableccWanPppoeTable | not-accessible | current | PPPoE settings for WAN interfaces. |
| 1.3.6.1.4.1.388.11.2.5.1.2.1 | RowccWanPppoeEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.1.2.1.1 | ColumnccWanPppoeEnable | read-write | current | Enable PPPoE for this WAN interface. |
| 1.3.6.1.4.1.388.11.2.5.1.2.1.2 | ColumnccWanPppoeUsername | read-write | current | PPPoE username. |
| 1.3.6.1.4.1.388.11.2.5.1.2.1.3 | ColumnccWanPppoePassword | read-write | current | PPPoE password. When this value is read, the switch returns a DisplayString of zero length. |
| 1.3.6.1.4.1.388.11.2.5.1.2.1.4 | ColumnccWanPppoeKeepAlive | read-write | current | PPPoE keep-alive. |
| 1.3.6.1.4.1.388.11.2.5.1.2.1.5 | ColumnccWanPppoeIdleTime | read-write | current | PPPoE idle time. |
| 1.3.6.1.4.1.388.11.2.5.1.2.1.6 | ColumnccWanPppoeAuthType | read-write | current | PPPoE authentication type. If no bits are set, no authentication is done. If more than one bit is set, any of the selected methods may be used by the switch. |
| 1.3.6.1.4.1.388.11.2.5.1.3 | TableccWanIpAddrTable | not-accessible | current | Table of IP addresses for the given WAN interface. Up to 8 IP addresses per WAN interface. |
| 1.3.6.1.4.1.388.11.2.5.1.3.1 | RowccWanIpAddrEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.1.3.1.1 | ColumnccWanIpAddrIndex | accessible-for-notify | current | Simple index 1..8 of entries for each WAN interface. |
| 1.3.6.1.4.1.388.11.2.5.1.3.1.2 | ColumnccWanIpAddrEnable | read-write | current | Enable this entry. |
| 1.3.6.1.4.1.388.11.2.5.1.3.1.3 | ColumnccWanIpAddr | read-write | current | WAN IP address. |
| 1.3.6.1.4.1.388.11.2.5.1.4 | NodeccWanFirewall | |||
| 1.3.6.1.4.1.388.11.2.5.1.4.1 | ScalarccWanFirewallGlobalEnable | read-write | current | This variable enables/disables the global state of the firewall. Note that if the firewall function is disabled, NAT, VPN, content filtering and subnet access … |
| 1.3.6.1.4.1.388.11.2.5.1.4.2 | TableccWanFirewallTable | not-accessible | current | Table of Firewall attacks that can be enabled/disabled. |
| 1.3.6.1.4.1.388.11.2.5.1.4.2.1 | RowccWanFirewallEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.1.4.2.1.1 | ColumnccWanFirewallIndex | accessible-for-notify | current | Simple index, but with explicitly enumerated values. |
| 1.3.6.1.4.1.388.11.2.5.1.4.2.1.2 | ColumnccWanFirewallDescription | read-only | current | Short description of the type of attack. |
| 1.3.6.1.4.1.388.11.2.5.1.4.2.1.3 | ColumnccWanFirewallAlwaysEnabled | read-only | current | A few of the firewall algorithms can NOT be disabled. If this value is TRUE, this is one of those algorithms. Any attempt to set ccWanFwEnable to FALSE will re… |
| 1.3.6.1.4.1.388.11.2.5.1.4.2.1.4 | ColumnccWanFirewallEnable | read-write | current | Set to TRUE to enable this type of firewall check. |
| 1.3.6.1.4.1.388.11.2.5.1.4.3 | ScalarccWanFirewallMimeFloodMaxHeaderLength | read-write | current | Mime flood attack check max header length. |
| 1.3.6.1.4.1.388.11.2.5.1.4.4 | ScalarccWanFirewallMimeFloodMaxHeaders | read-write | current | Mime flood attack check max headers. |
| 1.3.6.1.4.1.388.11.2.5.1.4.5 | ScalarccWanNatTimeout | read-write | current | Timeout value for NAT. |
| 1.3.6.1.4.1.388.11.2.5.1.5 | NodeccWanNat | |||
| 1.3.6.1.4.1.388.11.2.5.1.5.1 | ScalarccWanNatLowestUnusedSlot | read-only | current | Since the ccWanNatTable is actually implemented as a single list of entries, the second index of the ccWanNatTable, (ccWanNatIndex), must be unique across all … |
| 1.3.6.1.4.1.388.11.2.5.1.5.2 | TableccWanNatTable | not-accessible | current | Table of NAT mappings for each IP address assigned to each WAN interface. (The WS2000 currently only has one WAN interface, but all MIBs are designed for the p… |
| 1.3.6.1.4.1.388.11.2.5.1.5.2.1 | RowccWanNatEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.1.5.2.1.1 | ColumnccWanNatIndex | accessible-for-notify | current | Simple index matching the simple index in the ccWanTable. |
| 1.3.6.1.4.1.388.11.2.5.1.5.2.1.2 | ColumnccWanNatWanIpAddress | accessible-for-notify | current | One, (of possibly several), IP addresses assigned to this WAN interface. One entries in this table will appear for each matching entry in the ccWanIpAddrTable. |
| 1.3.6.1.4.1.388.11.2.5.1.5.2.1.3 | ColumnccWanNatType | read-write | current | Configure the NAT type. Only if 'nat1to1' is selected is the ccWanNat1to1IpAddr value is used. In such a case, any corresponding entries in the ccWanNatInbound… |
| 1.3.6.1.4.1.388.11.2.5.1.5.2.1.4 | ColumnccWanNat1to1IpAddr | read-write | current | The IP address to use for outbound 1-to-1 mapping. Only used if ccWanNatType is '1to1'. |
| 1.3.6.1.4.1.388.11.2.5.1.5.2.1.5 | ColumnccWanNatInboundDefaultEna | read-write | current | If set, any port that is NOT found in the ccWanNatInboundTable entries is forwarded to the IP addr specified by ccWanNatInboundDefaultIp. |
| 1.3.6.1.4.1.388.11.2.5.1.5.2.1.6 | ColumnccWanNatInboundDefaultIp | read-write | current | IP addr to send ports that do not match any entry in the ccWanNatInboundTable. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3 | TableccWanNatInboundTable | not-accessible | current | Table of inbound NAT mappings for IP addresses on WAN interfaces that are set to ccWanNatType of '1to1' or '1toMany'. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1 | RowccWanNatInboundEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.1 | ColumnccWanNatInboundIndex | accessible-for-notify | current | A given IP address on a given WAN interface may have many inbound NAT mappings. This (3rd) index numbers those many mappings. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.2 | ColumnccWanNatInboundName | read-write | current | Name of the inbound mapping. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.3 | ColumnccWanNatInboundTransport | read-write | current | Transport for which this mapping applies. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.4 | ColumnccWanNatInboundStartPort | read-write | current | Low-end of the port range. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.5 | ColumnccWanNatInboundEndPort | read-write | current | High-end of the port range. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.6 | ColumnccWanNatInboundIpAddr | read-write | current | IP address to map to. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.7 | ColumnccWanNatInboundTranslationPort | read-write | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.1.5.3.1.8 | ColumnccWanNatInboundRowStatus | read-write | current | Simple row status. |
| 1.3.6.1.4.1.388.11.2.5.1.5.4 | TableccWanNatOutboundTable | not-accessible | current | Table of outbound NAT mappings for IP addresses on WAN interfaces that are set to ccWanNatType of '1toMany'. |
| 1.3.6.1.4.1.388.11.2.5.1.5.4.1 | RowccWanNatOutboundEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.1.5.4.1.1 | ColumnccWanNatOutboundSubnetIndex | accessible-for-notify | current | A different mapping can be set for each subnet. This (3rd) index specifies the subnet. This index is the same value for a given subnet as in the ccLanTable. |
| 1.3.6.1.4.1.388.11.2.5.1.5.4.1.2 | ColumnccWanNatOutboundEnable | read-write | current | Enable the Outbound entry. |
| 1.3.6.1.4.1.388.11.2.5.1.5.4.1.3 | ColumnccWanNatOutboundPossibleIpAddr | read-only | current | This multi-bit-mask-pointer points to every IP address in the ccWanIpAddrTable that is a valid outbound NAT mapping for this subnet. Setting this value to all … |
| 1.3.6.1.4.1.388.11.2.5.1.5.4.1.4 | ColumnccWanNatOutboundIpAddr | read-write | current | This value points to the ccWanIpAddrTable entry that has been selected for the outbound NAT mapping. |
| 1.3.6.1.4.1.388.11.2.5.1.6 | NodeccWanVpn | |||
| 1.3.6.1.4.1.388.11.2.5.1.6.4 | NodeccWanVpnTunnelConfig | |||
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1 | TableccWanVpnTable | not-accessible | current | Table of VPN entries. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1 | RowccWanVpnEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.1 | ColumnccWanVpnIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.2 | ColumnccWanVpnName | read-write | current | Name of VPN tunnel. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.3 | ColumnccWanVpnLocalSubnet | read-write | current | Points to a ccSubnetTable entry. 1-LAN1, 2-LAN2, 3-WAN |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.4 | ColumnccWanVpnLocalWanIp | read-write | current | Points to a ccWanIpAddr entry. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.5 | ColumnccWanVpnRemoteSubnet | read-write | current | IP addr of the remote subnet. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.6 | ColumnccWanVpnRemoteSubnetMask | read-write | current | Mask for remote subnet. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.7 | ColumnccWanVpnRemoteGateway | read-write | current | Gateway IP addr for the remote subnet. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.8 | ColumnccWanVpnKeyExchange | read-write | current | Selects manual or automatic key exchange mechanism. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.9 | ColumnccWanVpnRowStatus | read-write | current | Used to create/destroy rows. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2 | TableccWanVpnKeyManualTable | not-accessible | current | Table of Manual Key Setting entries. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1 | RowccWanVpnKeyManualEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.1 | ColumnccWanVpnKeyManualAhAuth | read-write | current | data authentication and anti-replay services for the VPN tunnel. The following 2 keys have max length: md5 - 32 hex characters sha1 - 40 |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.2 | ColumnccWanVpnKeyManualInAhAuthKey | read-write | current | AH Authentication Key for inbound traffic. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.3 | ColumnccWanVpnKeyManualOutAhAuthKey | read-write | current | AH Authentication Key for outbound traffic. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.4 | ColumnccWanVpnKeyManualInAhSpi | read-write | current | inbound security association created by the AH algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.5 | ColumnccWanVpnKeyManualOutAhSpi | read-write | current | outbound security association created by the AH algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.6 | ColumnccWanVpnKeyManualEspType | read-write | current | packet encryption and optional data authentication and anti-replay services for the VPN tunnel. Some of the next 6 variables are used depending on: none - all … |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.7 | ColumnccWanVpnKeyManualEspEncrypAlg | read-write | current | ESP Encryption Algorithm. The following 2 keys have max length: des - 16 hex characters des3 - 48 aes128bit - 32 aes192bit - 48 aes256bit - 64 |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.8 | ColumnccWanVpnKeyManualInEspEncrypKey | read-write | current | ESP Encryption Key for inbound traffic. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.9 | ColumnccWanVpnKeyManualOutEspEncrypKey | read-write | current | ESP Encryption Key for inbound traffic. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.10 | ColumnccWanVpnKeyManualEspAuthAlg | read-write | current | ESP Authentication Algorithm. The following 2 keys have max length: md5 - 32 hex characters sha1 - 40 |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.11 | ColumnccWanVpnKeyManualInEspAuthKey | read-write | current | ESP Authentication Key for inbound traffic. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.12 | ColumnccWanVpnKeyManualOutEspAuthKey | read-write | current | ESP Authentication Key for outbound traffic. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.13 | ColumnccWanVpnKeyManualInEspSpi | read-write | current | inbound security association created by the ESP algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.14 | ColumnccWanVpnKeyManualOutEspSpi | read-write | current | outbound security association created by the ESP algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3 | TableccWanVpnKeyAutoTable | not-accessible | current | Table of Auto Key Setting entries. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1 | RowccWanVpnKeyAutoEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.1 | ColumnccWanVpnKeyAutoUsePerfectSecrecy | read-write | current | enable Perfect Forward Secrecy. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.2 | ColumnccWanVpnKeyAutoAhAuth | read-write | current | data authentication and anti-replay services for the VPN tunnel. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.3 | ColumnccWanVpnKeyAutoEspType | read-write | current | packet encryption and optional data authentication and anti-replay services for the VPN tunnel. Some of the next 2 variables are used depending on: none - the … |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.4 | ColumnccWanVpnKeyAutoEspEncrypAlg | read-write | current | ESP Encryption Algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.5 | ColumnccWanVpnKeyAutoEspAuthAlg | read-write | current | ESP Authentication Algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.6 | ColumnccWanVpnKeyAutoIkeOperationMode | read-write | current | IKE opreational mode. IKE main mode refers to the identity-protection exchange, and IKE aggressive mode refers to the aggressive exchange |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.7 | ColumnccWanVpnKeyAutoIkeLocalIdType | read-write | current | type of ID to be used for the WS 2000 end of the SA. The next variable only applies if this is set to 'fqdn' or 'ufqdn'. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.8 | ColumnccWanVpnKeyAutoIkeLocalIdData | read-write | current | Based upon the Local ID type you gave, specify the FQDN or UFQDN, |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.9 | ColumnccWanVpnKeyAutoIkeRemoteIdType | read-write | current | type of ID to be used for the remote end of the SA. The next variable only applies if this is set to 'fqdn' or 'ufqdn'. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.10 | ColumnccWanVpnKeyAutoIkeRemoteIdData | read-write | current | Based upon the Remote ID type you gave, specify the FQDN or UFQDN. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.11 | ColumnccWanVpnKeyAutoIkeAuthType | read-write | current | IKE Authentication Type. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.12 | ColumnccWanVpnKeyAutoIkeAuthAlg | read-write | current | IKE Authentication Algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.13 | ColumnccWanVpnKeyAutoIkeAuthPassphrase | read-write | current | With Pre-Shared Key as the authentication mode, provide a key. MD5 : 32-character hexadecimal key. SHA1 : 40-character hexadecimal key. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.14 | ColumnccWanVpnKeyAutoIkeEncrypAlg | read-write | current | IKE Encryption Algorithm. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.15 | ColumnccWanVpnKeyAutoIkeXauthMode | read-write | current | Currently XAUTH mechanism is not supported by WS2000 version 2.0. If 'none', the next 2 variables are ignored. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.16 | ColumnccWanVpnKeyAutoIkeXauthUsername | read-write | current | Currently XAUTH mechanism is not supported by WS2000 version 2.0. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.17 | ColumnccWanVpnKeyAutoIkeXauthPassword | read-write | current | Currently XAUTH mechanism is not supported by WS2000 version 2.0. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.18 | ColumnccWanVpnKeyAutoIkeKeyLifetime | read-write | current | The number of seconds that the key is valid. |
| 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.19 | ColumnccWanVpnKeyAutoIkeDiffieHelmanGroup | read-write | current | The Diffie-Hellman key agreement protocol allows two users to exchange a secret key over an insecure medium without any prior secrets. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5 | NodeccWanVpnTunnelStatus | |||
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1 | TableccWanVpnSaTable | not-accessible | current | Status of all tunnels that have been configured on the switch. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1 | RowccWanVpnSaEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.1 | ColumnccWanVpnSaTunnelName | read-only | current | Tunnel Name. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.2 | ColumnccWanVpnSaStatus | read-only | current | Status of each of the configured tunnels. When the tunnel is not in use the status will read NOT_ACTIVE. When the tunnel is connected the status will read ACTI… |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.3 | ColumnccWanVpnSaInSpi | read-only | current | Inbound SPI Security Parameter Index (SPI) for each of the tunnels. This is used locally by the switch to identify a security association. There are unique out… |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.4 | ColumnccWanVpnSaOutSpi | read-only | current | Outbound Security Parameter Index (SPI) for each of the tunnels. This is used locally by the switch to identify a security association. There are unique outbou… |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.5 | ColumnccWanVpnSaLifetime | read-only | current | Lifetime associated with a particular Security Association (SA). |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.6 | ColumnccWanVpnSaTxBytes | read-only | current | Total number amount of data (in bytes) transmitted through each of the configured tunnels. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.7 | ColumnccWanVpnSaRxBytes | read-only | current | Total number amount of data (in bytes) received through each of the configured tunnels. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.2 | TableccWanVpnIkeTable | not-accessible | current | Table of tunnels configured to use IKE for automatic key exchange |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1 | RowccWanVpnIkeEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1.1 | ColumnccWanVpnIkeTunnelName | read-only | current | Tunnel name. |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1.2 | ColumnccWanVpnIkeState | read-only | current | State for each of the tunnels configured to use IKE for automatic key exchange. When the tunnel is not active this will display NOT_CONNECTED. When the tunnel … |
| 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1.3 | ColumnccWanVpnIkeRemainingLife | read-only | current | Remaining life for the current IKE key for each of the listed tunnels. |
| 1.3.6.1.4.1.388.11.2.5.1.7 | NodeccWanContentBlock | |||
| 1.3.6.1.4.1.388.11.2.5.1.7.1 | ScalarccWanContentBlockSmtp | read-write | current | SMTP content block. |
| 1.3.6.1.4.1.388.11.2.5.1.7.2 | ScalarccWanContentBlockFtp | read-write | current | FTP content block. |
| 1.3.6.1.4.1.388.11.2.5.1.7.3 | ScalarccWanContentBlockHttp | read-write | current | HTTP content block. |
| 1.3.6.1.4.1.388.11.2.5.1.7.4 | TableccWanContentBlockOutUrlTable | not-accessible | current | Table of Content Block URL entries. |
| 1.3.6.1.4.1.388.11.2.5.1.7.4.1 | RowccWanContentBlockOutUrlEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.1.7.4.1.1 | ColumnccWanContentBlockOutUrlIndex | read-only | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.5.1.7.4.1.2 | ColumnccWanContentBlockOutUrlExtension | read-write | current | URL extension. |
| 1.3.6.1.4.1.388.11.2.5.1.7.4.1.3 | ColumnccWanContentBlockOutUrlRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.5.2 | NodeccPort | |||
| 1.3.6.1.4.1.388.11.2.5.2.1 | TableccPortTable | not-accessible | current | This table contains one entry for each physical port on the switch. |
| 1.3.6.1.4.1.388.11.2.5.2.1.1 | RowccPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.2.1.1.1 | ColumnccPortIndex | accessible-for-notify | current | Simple index. Instance/index .1 represents the port labelled '1' on the physical unit. The WAN port will reside after all ports that are numbered on the physci… |
| 1.3.6.1.4.1.388.11.2.5.2.1.1.2 | ColumnccPortType | read-only | current | Indicates the type of the port. |
| 1.3.6.1.4.1.388.11.2.5.2.1.1.3 | ColumnccPortPoeEquipped | read-only | current | Indicates the port can provide power-over-ethernet. |
| 1.3.6.1.4.1.388.11.2.5.2.1.1.4 | ColumnccPortStatus | read-only | current | Tells if the port is up/down. |
| 1.3.6.1.4.1.388.11.2.5.2.1.1.5 | ColumnccPortDuplex | read-only | current | Describes the duplex, (half/full), status of the port. |
| 1.3.6.1.4.1.388.11.2.5.2.1.1.6 | ColumnccPortSpeed | read-only | current | Link's speed in bits per second. |
| 1.3.6.1.4.1.388.11.2.5.4 | NodeccLan | |||
| 1.3.6.1.4.1.388.11.2.5.4.2 | NodeccSubnet | |||
| 1.3.6.1.4.1.388.11.2.5.4.2.1 | TableccSubnetTable | not-accessible | current | Table of Subnets. |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1 | RowccSubnetEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.1 | ColumnccSubnetIndex | accessible-for-notify | current | Simple index, 1..4 |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.2 | ColumnccSubnetEnable | read-write | current | Enable this Subnet. |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.3 | ColumnccSubnetName | read-write | current | Subnet name. |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.4 | ColumnccSubnetIpAddress | read-write | current | Ip address of this Subnet. |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.5 | ColumnccSubnetIpSubnetMask | read-write | current | IPaddr subnet mask of this Subnet |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.6 | ColumnccSubnetPortMembers | read-write | current | Pointer to zero or more ports that are members of this Subnet. No port can be a member of more than one Subnet at any given time. |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.7 | ColumnccSubnetWlanMembers | read-write | current | Pointer to zero or more WLANs that are members of this Subnet. No Subnet can be a member of more than one Subnet at any given time. |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.8 | ColumnccSubnetDhcpState | read-write | current | Specifies how Subnet gets its IP address/mask. |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.9 | ColumnccSubnetDhcpIpAddress | read-only | current | The IP address obtained via DHCP if this Subnet is configured as a DHCP client. If this Subnet is configured to not use DHCP, or is a DHCP server this value wi… |
| 1.3.6.1.4.1.388.11.2.5.4.2.1.1.10 | ColumnccSubnetDhcpSubnetMask | read-only | current | The Subnet IPaddr subnet mask obtained via DHCP if this Subnet is configured as a DHCP client. If this Subnet is configured to not use DHCP, or is a DHCP serve… |
| 1.3.6.1.4.1.388.11.2.5.4.2.2 | TableccSubnetDhcpServerTable | not-accessible | current | Configures a DHCP server for a Subnet. While these values can always be SET, they will only take effect if the given Subnet is enabled and configured to be a D… |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1 | RowccSubnetDhcpServerEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.1 | ColumnccSubnetDhcpServerEnable | read-only | current | Enable DHCP Server functionality on this Subnet. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.2 | ColumnccSubnetDhcpServerPoolStart | read-write | current | The start/low end of the range of IP addresses to give-out. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.3 | ColumnccSubnetDhcpServerPoolEnd | read-write | current | The end/high-end of the range of IP addresses to give-out. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.4 | ColumnccSubnetDhcpServerPrimaryDns | read-write | current | IP address of primary DNS server to assign to DHCP clients. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.5 | ColumnccSubnetDhcpServerSecondaryDns | read-write | current | IP address of secondary DNS server to assign to DHCP clients. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.6 | ColumnccSubnetDhcpServerDefaultGateway | read-write | current | IP address of default gateway to assign to DHCP clients. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.7 | ColumnccSubnetDhcpServerLeaseTime | read-write | current | DHCP lease time. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.8 | ColumnccSubnetDhcpServerWinsServer | read-write | current | DHCP Server WINS server IP Address. |
| 1.3.6.1.4.1.388.11.2.5.4.2.2.1.9 | ColumnccSubnetDhcpServerDomainName | read-write | current | DHCP server Domain Name. |
| 1.3.6.1.4.1.388.11.2.5.4.2.3 | TableccSubnetDhcpServerStaticMapTable | not-accessible | current | Table of static MAC-IPaddr mappings for the given DHCP server. |
| 1.3.6.1.4.1.388.11.2.5.4.2.3.1 | RowccSubnetDhcpServerStaticMapEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.4.2.3.1.1 | ColumnccSubnetDhcpServerStaticMapMac | read-create | current | MAC address to be mapped. |
| 1.3.6.1.4.1.388.11.2.5.4.2.3.1.2 | ColumnccSubnetDhcpServerStaticMapIpAddr | read-create | current | IP address to assign to this MAC address. |
| 1.3.6.1.4.1.388.11.2.5.4.2.3.1.3 | ColumnccSubnetDhcpServerStaticMapEnable | read-create | current | Value to control row creation/deletion. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4 | NodeccSubnetAccess | |||
| 1.3.6.1.4.1.388.11.2.5.4.2.4.1 | TableccSubnetAccessTable | not-accessible | current | Describes how packets are allowed to flow from different sources to different destinations. Note that since only subnets can be sources for this table, the ccS… |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1 | RowccSubnetAccessEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.1 | ColumnccSubnetAccessDestIndex | accessible-for-notify | current | Simple index for destination. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.2 | ColumnccSubnetAccessDestType | read-only | current | Type of the destination. destDrop is a 'virtual' destination that accounts for all dropped packets. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.3 | ColumnccSubnetAccessDestPtrToDest | read-only | current | A pointer to the corresponding entry in the ccSubnet or ccWan table, (depending on _DestType). |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.4 | ColumnccSubnetAccessRuleType | read-write | current | All ccSubnetAccessRuleTable entries for this combination of ccSubnetIndex and ccSubnetAccessDestIndex will be of the same type, (accept or deny). |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.5 | ColumnccSubnetAccessPtrToRules | read-only | current | Points to the zero or more ccSubnetAccessRuleTable entries that correspond to this ccSubnetIndex + ccSubnetAccessDestIndex combination/entry. This value cannot… |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2 | TableccSubnetAccessRuleTable | not-accessible | current | Describes how packets are allowed to flow from different sources to different destinations. Note that since only subnets can be sources for this table, the ccS… |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1 | RowccSubnetAccessRuleEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.1 | ColumnccSubnetAccessRuleIndex | accessible-for-notify | current | Each src/dest combination can have several rules; this value is the index. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.2 | ColumnccSubnetAccessRuleSrcPtr | read-write | current | This is the value of ccSubnetIndex corresponding to the source for this rule. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.3 | ColumnccSubnetAccessRuleDestPtr | read-write | current | This is the value of ccSubnetAccessDestIndex corresponding to the destination for this rule. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.4 | ColumnccSubnetAccessRuleName | read-write | current | Name of ACL entry. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.5 | ColumnccSubnetAccessRuleTransport | read-write | current | Transport. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.6 | ColumnccSubnetAccessRuleStartPort | read-write | current | Starting port number. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.7 | ColumnccSubnetAccessRuleEndPort | read-write | current | Ending port number. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.8 | ColumnccSubnetAccessRuleRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3 | TableccSubnetAccessAdvInTable | not-accessible | current | Table of Advanced Inbound entries. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1 | RowccSubnetAccessAdvInEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.1 | ColumnccSubnetAccessAdvInIndex | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.2 | ColumnccSubnetAccessAdvInSrcIp | read-write | current | Source IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.3 | ColumnccSubnetAccessAdvInSrcIpLength | read-write | current | Mask length for the IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.4 | ColumnccSubnetAccessAdvInDestIp | read-write | current | Destination IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.5 | ColumnccSubnetAccessAdvInDestIpLength | read-write | current | mask length for the IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.6 | ColumnccSubnetAccessAdvInTransport | read-write | current | Type of transport |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.7 | ColumnccSubnetAccessAdvInSrcPortStart | read-write | current | start of source port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.8 | ColumnccSubnetAccessAdvInSrcPortEnd | read-write | current | End of source port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.9 | ColumnccSubnetAccessAdvInDestPortStart | read-write | current | start of destination port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.10 | ColumnccSubnetAccessAdvInDestPortEnd | read-write | current | End of destination port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.12 | ColumnccSubnetAccessAdvInReverseNatIp | read-write | current | Address to use for reverse NAT. To disable, use 0.0.0.0. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.13 | ColumnccSubnetAccessAdvInReverseNatPort | read-write | current | Port to use for reverse NAT. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.14 | ColumnccSubnetAccessAdvInAction | read-write | current | Action on the acl i.e allow or deny |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.15 | ColumnccSubnetAccessAdvInRowStatus | read-write | current | status of the row |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4 | TableccSubnetAccessAdvOutTable | not-accessible | current | Table of Advanced Outbound entries. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1 | RowccSubnetAccessAdvOutEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.1 | ColumnccSubnetAccessAdvOutIndex | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.2 | ColumnccSubnetAccessAdvOutSrcIp | read-write | current | Source IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.3 | ColumnccSubnetAccessAdvOutSrcIpLength | read-write | current | Mask length for the IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.4 | ColumnccSubnetAccessAdvOutDestIp | read-write | current | Destination IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.5 | ColumnccSubnetAccessAdvOutDestIpLength | read-write | current | mask length for the IP address |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.6 | ColumnccSubnetAccessAdvOutTransport | read-write | current | Type of transport |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.7 | ColumnccSubnetAccessAdvOutSrcPortStart | read-write | current | start of source port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.8 | ColumnccSubnetAccessAdvOutSrcPortEnd | read-write | current | End of source port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.9 | ColumnccSubnetAccessAdvOutDestPortStart | read-write | current | start of destination port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.10 | ColumnccSubnetAccessAdvOutDestPortEnd | read-write | current | End of destination port list |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.11 | ColumnccSubnetAccessAdvOutReverseNat | read-write | current | Points to a ccWanIpAddrTable entry representing the WAN IP addr to be used for NAT. To disable NAT, set this value to 0. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.12 | ColumnccSubnetAccessAdvOutAction | read-write | current | Action on the acl i.e allow or deny |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.13 | ColumnccSubnetAccessAdvOutRowStatus | read-write | current | status of the row |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.5 | ScalarccSubnetAccessAdvOverrideMode | read-write | current | Override the Subnet Access and NAT settings. |
| 1.3.6.1.4.1.388.11.2.5.4.2.4.6 | ScalarccSubnetAccessAdvImportRules | read-write | current | When set to 1 the Subnet Access Rules shall be imported on top of the Advanced Access rules. |
| 1.3.6.1.4.1.388.11.2.5.4.3 | NodeccLanVlan | |||
| 1.3.6.1.4.1.388.11.2.5.4.3.1 | ScalarccLanVlanType | read-write | current | Type of the VLAN port/user based |
| 1.3.6.1.4.1.388.11.2.5.4.3.2 | ScalarccLanVlanTrunkPort | read-write | current | Port used for VLAN trunking ( 1-6) |
| 1.3.6.1.4.1.388.11.2.5.4.3.3 | ScalarccLanVlanDefaultTag | read-write | current | Deafult VLAN tag ( default is 1) |
| 1.3.6.1.4.1.388.11.2.5.4.3.4 | ScalarccLanVlanTrunked | read-write | current | List of VLANs which are trunked. |
| 1.3.6.1.4.1.388.11.2.5.4.3.5 | TableccLanVlanTable | not-accessible | current | Table of VLAN IDs mapped to Subnets. |
| 1.3.6.1.4.1.388.11.2.5.4.3.5.1 | RowccLanVlanEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.5.4.3.5.1.1 | ColumnccLanVlanId | read-write | current | Vlan associated with a subnet |
| 1.3.6.1.4.1.388.11.2.6 | NodeccRouter | |||
| 1.3.6.1.4.1.388.11.2.6.1 | NodeccRouterRip | |||
| 1.3.6.1.4.1.388.11.2.6.1.1 | ScalarccRouterRipType | read-write | current | RIP type. |
| 1.3.6.1.4.1.388.11.2.6.1.2 | ScalarccRouterRipDirection | read-write | current | RIP direction. |
| 1.3.6.1.4.1.388.11.2.6.1.3 | NodeccRouterRip2 | |||
| 1.3.6.1.4.1.388.11.2.6.1.3.1 | ScalarccRouterRip2AuthType | read-write | current | RIP v2 authentication type. |
| 1.3.6.1.4.1.388.11.2.6.1.3.2 | ScalarccRouterRip2SimplePassword | read-write | current | Password used for RIP v2 simple authentication. |
| 1.3.6.1.4.1.388.11.2.6.1.3.3 | ScalarccRouterRip2Md5Key1Id | read-write | current | RIP v2 with MD5 authentication: key #1 - ID. |
| 1.3.6.1.4.1.388.11.2.6.1.3.4 | ScalarccRouterRip2Md5Key1AuthKey | read-write | current | RIP v2 with MD5 authentication: key #1 - auth key. |
| 1.3.6.1.4.1.388.11.2.6.1.3.5 | ScalarccRouterRip2Md5Key2Id | read-write | current | RIP v2 with MD5 authentication: key #2 - ID. |
| 1.3.6.1.4.1.388.11.2.6.1.3.6 | ScalarccRouterRip2Md5Key2AuthKey | read-write | current | RIP v2 with MD5 authentication: key #2 - auth key. |
| 1.3.6.1.4.1.388.11.2.6.2 | TableccRouterRoutesTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.6.2.1 | RowccRouterRoutesEntry | not-accessible | current | Table of Routing entries. |
| 1.3.6.1.4.1.388.11.2.6.2.1.1 | ColumnccRouterRoutesIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.6.2.1.2 | ColumnccRouterRoutesDest | read-only | current | IP address of the destination |
| 1.3.6.1.4.1.388.11.2.6.2.1.3 | ColumnccRouterRoutesDestMask | read-only | current | Mask used to specify the route |
| 1.3.6.1.4.1.388.11.2.6.2.1.4 | ColumnccRouterRoutesGateway | read-only | current | Ip address of the gateway for this route |
| 1.3.6.1.4.1.388.11.2.6.2.1.5 | ColumnccRouterRoutesInterface | read-only | current | Interface used for this route |
| 1.3.6.1.4.1.388.11.2.6.2.1.6 | ColumnccRouterRoutesMetric | read-only | current | Metric specified for this route. |
| 1.3.6.1.4.1.388.11.2.6.3 | TableccRouterUserRoutesTable | not-accessible | current | Table of User defined Routes. |
| 1.3.6.1.4.1.388.11.2.6.3.1 | RowccRouterUserRoutesEntry | not-accessible | current | User defined routes |
| 1.3.6.1.4.1.388.11.2.6.3.1.1 | ColumnccRouterUserRoutesIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.6.3.1.2 | ColumnccRouterUserRoutesDest | read-write | current | IP address of the destination |
| 1.3.6.1.4.1.388.11.2.6.3.1.3 | ColumnccRouterUserRoutesDestMask | read-write | current | Mask used to specify the route |
| 1.3.6.1.4.1.388.11.2.6.3.1.4 | ColumnccRouterUserRoutesGateway | read-write | current | Ip address of the gateway for this route |
| 1.3.6.1.4.1.388.11.2.6.3.1.5 | ColumnccRouterUserRoutesInterface | read-write | current | Interface used for this route |
| 1.3.6.1.4.1.388.11.2.6.3.1.6 | ColumnccRouterUserRoutesMetric | read-write | current | Metric specified for this route. |
| 1.3.6.1.4.1.388.11.2.6.3.1.7 | ColumnccRouterUserRoutesRowStatus | read-write | current | Status of this row. |
| 1.3.6.1.4.1.388.11.2.7 | NodeccRap | |||
| 1.3.6.1.4.1.388.11.2.7.1 | NodeccRapControl | |||
| 1.3.6.1.4.1.388.11.2.7.1.3 | NodeccRapControlPollSymbolMus | |||
| 1.3.6.1.4.1.388.11.2.7.1.3.1 | ScalarccRapPollSymbolMusEnable | read-write | current | Enable/disable polling MUs for their lists of known APs. The state of this variable persists across reboots. The factory-default state is disabled. |
| 1.3.6.1.4.1.388.11.2.7.1.3.2 | ScalarccRapPollSymbolMusInterval | read-write | current | Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of 5min or more… |
| 1.3.6.1.4.1.388.11.2.7.1.4 | NodeccRapControlOnChannel | |||
| 1.3.6.1.4.1.388.11.2.7.1.4.1 | ScalarccRapOnChannelEnable | read-write | current | Enable/disable polling MUs for their lists of known APs. The state of this variable persists across reboots. The factory-default state is disabled. |
| 1.3.6.1.4.1.388.11.2.7.1.4.2 | ScalarccRapOnChannelInterval | read-write | current | Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of 5min or more… |
| 1.3.6.1.4.1.388.11.2.7.1.5 | NodeccRapControlDetectors | |||
| 1.3.6.1.4.1.388.11.2.7.1.5.1 | ScalarccRapDetectorsEnable | read-write | current | Enable/disable the entire 'detector' sub-system. On the true-to-false transition, any portals previously claimed as listeners will be released and reset. Once … |
| 1.3.6.1.4.1.388.11.2.7.1.5.2 | ScalarccRapDetectorsInterval | read-write | current | Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of 5min or more… |
| 1.3.6.1.4.1.388.11.2.7.2 | NodeccRapAuth | |||
| 1.3.6.1.4.1.388.11.2.7.2.2 | NodeccRapAuthList | |||
| 1.3.6.1.4.1.388.11.2.7.2.2.1 | ScalarccRapAuthAllSymbolMac | read-write | current | If TRUE, any newly-discovered AP that has a MAC address with a Symbol vendor prefix is authorized, regardless of the ESSID. |
| 1.3.6.1.4.1.388.11.2.7.2.2.2 | TableccRapAuthTable | not-accessible | current | A list of 'authorized' APs. There is no need to include on this list any APs adopted by the switch. Typically, this list will contain APs that are located in n… |
| 1.3.6.1.4.1.388.11.2.7.2.2.2.1 | RowccRapAuthEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.7.2.2.2.1.1 | ColumnccRapAuthIndex | accessible-for-notify | current | Index. |
| 1.3.6.1.4.1.388.11.2.7.2.2.2.1.2 | ColumnccRapAuthMacFilter | read-write | current | MAC address of AP to consider 'authorized'. To specify the entire MAC address as a wildcard, (match any MAC address), use FF:FF:FF:FF:FF:FF. (While it had been… |
| 1.3.6.1.4.1.388.11.2.7.2.2.2.1.3 | ColumnccRapAuthEssidFilter | read-write | current | ESSID of AP to consider 'authorized'. Set to 33 '*' characters for wildcard, (to match any ESSID). (ESSIDs must be 32ch or less). |
| 1.3.6.1.4.1.388.11.2.7.2.2.2.1.4 | ColumnccRapAuthRowExists | read-write | current | A kludge to avoid RowStatus and save development time. Set this value to true when creating the row. Set this value to false to destroy the row. ??- better nam… |
| 1.3.6.1.4.1.388.11.2.7.2.2.3 | ScalarccRapAuthErase | read-write | current | Setting this value to TRUE erases all AuthTable entries. |
| 1.3.6.1.4.1.388.11.2.7.2.2.4 | ScalarccRapAuthCopyAllApproved | read-write | current | Causes all ccRapResultsApprovedTable entries to be immediately copied to the ccRapAuthTable. |
| 1.3.6.1.4.1.388.11.2.7.2.2.5 | ScalarccRapAuthCopyAllRogue | read-write | current | Causes all ccRapResultsRogueTable entries to be immediately copied to the ccRapAuthTable. |
| 1.3.6.1.4.1.388.11.2.7.3 | NodeccRapResults | |||
| 1.3.6.1.4.1.388.11.2.7.3.1 | NodeccRapResultsApproved | |||
| 1.3.6.1.4.1.388.11.2.7.3.1.1 | ScalarccRapResultsApprovedAgeOut | read-write | current | If an entry in the _ResultsApproved table is not heard by any means for this number of minutes, is elligable to be removed from the table by the switch; (the s… |
| 1.3.6.1.4.1.388.11.2.7.3.1.2 | TableccRapResultsApprovedTable | not-accessible | current | Each AP MAC/ESSID combination heard by any enabled detection method will be reported in this table, if it has been determined to be 'approved' via one of the e… |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1 | RowccRapResultsApprovedEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.1 | ColumnccRapResultsApprovedIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.2 | ColumnccRapResultsApprovedApMac | read-only | current | MAC address of the heard AP. |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.3 | ColumnccRapResultsApprovedEssid | read-only | current | ESSID of the heard AP. |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.4 | ColumnccRapResultsApprovedCopyToAuthTable | read-write | current | When set to TRUE, this entry is copied to the RuleTable. |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.5 | ColumnccRapResultsApprovedFirstHeard | read-only | current | Snapshot of sysUpTime the first time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.6 | ColumnccRapResultsApprovedLastHeard | read-only | current | Snapshot of sysUpTime the most recent time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.7 | ColumnccRapResultsApprovedPortalPtr | read-only | current | A mask of Portal table entries. Those Portal entries indicated by a '1' in this mask were at one time the servicing Portal for an MU that reported hearing this… |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.8 | ColumnccRapResultsApprovedHowFound | read-only | current | Describes the status of this AP. ??- I don't think we would report adoptedAp on the results table, so don't need this enum value. |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.9 | ColumnccRapResultsApprovedHowAuth | read-only | current | Describes how this AP was authorized, (or not). The order in which the various methods of authorizing APs is attempted is exactly the numerical order of the en… |
| 1.3.6.1.4.1.388.11.2.7.3.1.2.1.10 | ColumnccRapResultsApprovedChannel | read-only | current | Describes on which channel this AP was found. |
| 1.3.6.1.4.1.388.11.2.7.3.1.3 | ScalarccRapResultsApprovedErase | read-write | current | Setting this value to TRUE erases all Results entries. Any APs heard after that event will be treated as newly heard; (which means they will also generate noti… |
| 1.3.6.1.4.1.388.11.2.7.3.1.4 | NotificationccRapNewApprovedAp | current | A new AP has been heard that was in some manner authorized. | |
| 1.3.6.1.4.1.388.11.2.7.3.2 | NodeccRapResultsRogue | |||
| 1.3.6.1.4.1.388.11.2.7.3.2.1 | ScalarccRapResultsRogueAgeOut | read-write | current | If an entry in the _ResultsRogue table is not heard by any means for this number of minutes, is elligable to be removed from the table by the switch; (the swit… |
| 1.3.6.1.4.1.388.11.2.7.3.2.2 | TableccRapResultsRogueTable | not-accessible | current | Each AP MAC/ESSID combination heard by any enabled detection method will be reported in this table, if it has NOT been determined to be 'approved' via one of t… |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1 | RowccRapResultsRogueEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.1 | ColumnccRapResultsRogueIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.2 | ColumnccRapResultsRogueApMac | read-only | current | MAC address of the heard AP. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.3 | ColumnccRapResultsRogueEssid | read-only | current | ESSID of the heard AP. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.4 | ColumnccRapResultsRogueCopyToAuthTable | read-write | current | When set to TRUE, this entry is copied to the RuleTable. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.5 | ColumnccRapResultsRogueFirstHeard | read-only | current | Snapshot of sysUpTime the first time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.6 | ColumnccRapResultsRogueLastHeard | read-only | current | Snapshot of sysUpTime the most recent time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.7 | ColumnccRapResultsRoguePortalPtr | read-only | current | A mask of Portal table entries. Those Portal entries indicated by a '1' in this mask were at one time the servicing Portal for an MU that reported hearing this… |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.8 | ColumnccRapResultsRogueHowFound | read-only | current | Describes the status of this AP. ??- I don't think we would report adoptedAp on the results table, so don't need this enum value. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.9 | ColumnccRapResultsRogueClosestPortalPtr | read-only | current | A pointer to closest reporting Portal to the Rogue AP, (where 'closest' is defined as greatest RSSI value among all Portals reporting this AP). |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.10 | ColumnccRapResultsRogueClosestPortalRssi | read-only | current | RSSI reported by the closest Portal. |
| 1.3.6.1.4.1.388.11.2.7.3.2.2.1.11 | ColumnccRapResultsRogueChannel | read-only | current | Describes on which channel this AP was found. |
| 1.3.6.1.4.1.388.11.2.7.3.2.3 | ScalarccRapResultsRogueErase | read-write | current | Setting this value to TRUE erases all Results entries. Any APs heard after that event will be treated as newly heard; (which means they will also generate noti… |
| 1.3.6.1.4.1.388.11.2.7.3.2.4 | NotificationccRapNewRogueAp | current | A new AP has been heard that was NOT authorized. | |
| 1.3.6.1.4.1.388.11.2.7.4 | NodeccRapLocate | |||
| 1.3.6.1.4.1.388.11.2.7.4.1 | NodeccRapPortalResults | |||
| 1.3.6.1.4.1.388.11.2.7.4.1.1 | ScalarccRapPortalResultsApMac | read-write | current | The MAC address of the AP to be reported. (No wildcarding of the AP MAC is allowed. If it were, several APs could be found that match the selection criteria). |
| 1.3.6.1.4.1.388.11.2.7.4.1.2 | ScalarccRapPortalResultsApEssid | read-write | current | The ESSID of the AP to be reported. (No wildcarding of the AP ESSID is allowed. If it were, several APs could be found that match the selection criteria). |
| 1.3.6.1.4.1.388.11.2.7.4.1.3 | ScalarccRapPortalResultsInProcess | read-write | current | Setting to true erases the _PortalResultsTable, and immediately initiates a scan of all Portals currently enabled in ccRapControlOnChannel and ccRapControlDete… |
| 1.3.6.1.4.1.388.11.2.7.4.1.4 | TableccRapPortalResultsTable | not-accessible | current | Each (enabled/configured) Portal that hears the specified AP's MAC/ESSID combination will be reported as one entry in this table. For a rogue of limited range … |
| 1.3.6.1.4.1.388.11.2.7.4.1.4.1 | RowccRapPortalResultsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.7.4.1.4.1.1 | ColumnccRapPortalResultsIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.7.4.1.4.1.2 | ColumnccRapPortalResultsPortalMac | read-only | current | MAC address of the Portal reporting having heard the specified AP. |
| 1.3.6.1.4.1.388.11.2.7.4.1.4.1.3 | ColumnccRapPortalResultsRssi | read-only | current | RSSI value heard by the Portal. |
| 1.3.6.1.4.1.388.11.2.7.4.2 | NodeccRapPollOneMu | |||
| 1.3.6.1.4.1.388.11.2.7.4.2.1 | ScalarccRapPollOneMuMac | read-write | current | Writing this value with the MAC address of a MU causes the switch to read that MU's known AP list. This read is performed just once, (it is not repeated). This… |
| 1.3.6.1.4.1.388.11.2.7.4.2.2 | ScalarccRapPollOneMuInProcess | read-write | current | Setting to true initiates the polling of one specified MU's known AP table. Once the switch receives a response from the requested MU, it sets this value to fa… |
| 1.3.6.1.4.1.388.11.2.7.4.2.3 | ScalarccRapPollOneMuStatus | read-only | current | Describes if the MU is associated or not, and if so, if the MU is Symbol Rogue detect enabled or not. |
| 1.3.6.1.4.1.388.11.2.7.4.2.4 | TableccRapPollOneMuResultsTable | not-accessible | current | Shows the known AP table as read from the specified MU. This table is NOT cumulative; that is, it only reflects exactly what was read from the most recent read… |
| 1.3.6.1.4.1.388.11.2.7.4.2.4.1 | RowccRapPollOneMuResultsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.11.2.7.4.2.4.1.1 | ColumnccRapPollOneMuResultsIndex | accessible-for-notify | current | Simple index into the table. |
| 1.3.6.1.4.1.388.11.2.7.4.2.4.1.2 | ColumnccRapPollOneMuResultsRssi | read-only | current | RSSI reported for that known AP. |
| 1.3.6.1.4.1.388.11.2.7.4.2.4.1.3 | ColumnccRapPollOneMuResultsEssid | read-only | current | ESSID of the heard AP. |
| 1.3.6.1.4.1.388.11.2.7.4.2.4.1.4 | ColumnccRapPollOneMuResultsApMac | read-only | current | MAC address of the heard AP. |
| 1.3.6.1.4.1.388.11.2.8 | NodeccRadiusServer | |||
| 1.3.6.1.4.1.388.11.2.8.1 | NodeccRadius | |||
| 1.3.6.1.4.1.388.11.2.8.1.1 | ScalarccRadiusDataSource | read-write | current | Source of data for authentication. It can be local database on the switch or LDAP database i.e ADS or openLDAP |
| 1.3.6.1.4.1.388.11.2.8.1.2 | ScalarccRadiusDefaultEapType | read-write | current | Deafult EAP type advertised by the radius server. |
| 1.3.6.1.4.1.388.11.2.8.1.4 | ScalarccRadiusAuthTypePeap | read-write | current | Type of EAP type within PEAP |
| 1.3.6.1.4.1.388.11.2.8.1.5 | ScalarccRadiusAuthTypeTtls | read-write | current | Type of EAP type within TTLS |
| 1.3.6.1.4.1.388.11.2.8.1.6 | ScalarccRadiusServerCertificate | read-write | current | Id of the ceritificate used by RADIUS |
| 1.3.6.1.4.1.388.11.2.8.1.7 | ScalarccRadiusCACertificate | read-write | current | ID of the CA certificate used by RADIUS |
| 1.3.6.1.4.1.388.11.2.8.1.8 | TableccRadiusClientAuthTable | not-accessible | current | Table of Radius Client Entries. |
| 1.3.6.1.4.1.388.11.2.8.1.8.1 | RowccRadiusClientAuthEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.8.1.8.1.1 | ColumnccRadiusClientAuthIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.8.1.8.1.2 | ColumnccRadiusClientAuthIpAddr | read-write | current | IP address of the client |
| 1.3.6.1.4.1.388.11.2.8.1.8.1.3 | ColumnccRadiusClientAuthMask | read-write | current | Mask of the client's IP address |
| 1.3.6.1.4.1.388.11.2.8.1.8.1.4 | ColumnccRadiusClientAuthSharedSecret | read-write | current | Shared secret between the client and the radius server |
| 1.3.6.1.4.1.388.11.2.8.1.8.1.5 | ColumnccRadiusClientAuthRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.8.2 | NodeccRadiusProxy | |||
| 1.3.6.1.4.1.388.11.2.8.2.1 | ScalarccRadiusProxyRetryCount | read-write | current | Number of retries for sending messages to a proxy |
| 1.3.6.1.4.1.388.11.2.8.2.2 | ScalarccRadiusProxyTimeout | read-write | current | TImeout in seconds before retrying to a proxy |
| 1.3.6.1.4.1.388.11.2.8.2.3 | TableccRadiusProxyServerTable | not-accessible | current | Table of Proxy Realm Entries. |
| 1.3.6.1.4.1.388.11.2.8.2.3.1 | RowccRadiusProxyServerEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.8.2.3.1.1 | ColumnccRadiusProxyServerIndex | accessible-for-notify | current | Simple Index. |
| 1.3.6.1.4.1.388.11.2.8.2.3.1.2 | ColumnccRadiusProxyServerPrefixOrSuffix | read-write | current | Prefix of suffix used for proxying radius request to a proxy server |
| 1.3.6.1.4.1.388.11.2.8.2.3.1.3 | ColumnccRadiusProxyServerIp | read-write | current | IP address of the proxy server |
| 1.3.6.1.4.1.388.11.2.8.2.3.1.4 | ColumnccRadiusProxyServerPort | read-write | current | Port of proxy server |
| 1.3.6.1.4.1.388.11.2.8.2.3.1.5 | ColumnccRadiusProxyServerSharedSecret | read-write | current | Shared secret between radius server and proxy server |
| 1.3.6.1.4.1.388.11.2.8.2.3.1.6 | ColumnccRadiusProxyServerRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.8.3 | NodeccRadiusLdap | |||
| 1.3.6.1.4.1.388.11.2.8.3.1 | ScalarccRadiusLdapServerIp | read-write | current | IP address of the LDAP server |
| 1.3.6.1.4.1.388.11.2.8.3.2 | ScalarccRadiusLdapServerPort | read-write | current | Port of the LDAP server |
| 1.3.6.1.4.1.388.11.2.8.3.3 | ScalarccRadiusLdapLoginAttribute | read-write | current | Name of the login attribute used by LDAP for authenticating the user. |
| 1.3.6.1.4.1.388.11.2.8.3.4 | ScalarccRadiusLdapPasswordAttribute | read-write | current | Name of the login attribute used by LDAP for authenticating the user. |
| 1.3.6.1.4.1.388.11.2.8.3.5 | ScalarccRadiusLdapBindDistinguishedName | read-write | current | Bind DN used the LDAP client on the WS2000 to connect to a LDAP server |
| 1.3.6.1.4.1.388.11.2.8.3.6 | ScalarccRadiusLdapBindDistinguishedPassword | read-write | current | Bind password used the LDAP client on the WS2000 to connect to a LDAP server |
| 1.3.6.1.4.1.388.11.2.8.3.7 | ScalarccRadiusLdapBaseDistinguishedName | read-write | current | Base DN used the LDAP client on the WS2000 to connect to a LDAP server. |
| 1.3.6.1.4.1.388.11.2.8.3.8 | ScalarccRadiusLdapGroupAttribute | read-write | current | Name of the group attribute used by LDAP for retrieving the group associated with a user |
| 1.3.6.1.4.1.388.11.2.8.3.9 | ScalarccRadiusLdapGroupFilter | read-write | current | Filter specification used by the LDAP client to retrieve the groups associated with a user |
| 1.3.6.1.4.1.388.11.2.8.3.10 | ScalarccRadiusLdapGroupMembershipAttribute | read-write | current | Name of the attribute in the user schema which specifies groups associated with the user. This is used if the group filter specified by ccRadiusGroupFilter ret… |
| 1.3.6.1.4.1.388.11.2.8.4 | NodeccRadiusUsers | |||
| 1.3.6.1.4.1.388.11.2.8.4.1 | TableccRadiusUsersGroupTable | not-accessible | obsolete | Table of Group entries. |
| 1.3.6.1.4.1.388.11.2.8.4.1.1 | RowccRadiusUsersGroupEntry | not-accessible | obsolete | Description. |
| 1.3.6.1.4.1.388.11.2.8.4.1.1.1 | ColumnccRadiusUsersGroup | read-create | obsolete | Name of the group |
| 1.3.6.1.4.1.388.11.2.8.4.1.1.2 | ColumnccRadiusUsersGroupRowStatus | read-create | obsolete | Row status |
| 1.3.6.1.4.1.388.11.2.8.4.1.1.3 | ColumnccRadiusUsersGroupId | read-only | obsolete | Actual index of that Group in the Configuration. Added to solve a problem encountered by SEMM for resolving the Multipointer ccRadiusUsersGroups. |
| 1.3.6.1.4.1.388.11.2.8.4.2 | TableccRadiusUsersTable | not-accessible | current | Table of User entries. |
| 1.3.6.1.4.1.388.11.2.8.4.2.1 | RowccRadiusUsersEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.11.2.8.4.2.1.1 | ColumnccRadiusUsersId | read-create | current | User name. |
| 1.3.6.1.4.1.388.11.2.8.4.2.1.2 | ColumnccRadiusUsersPassword | read-create | current | Password. |
| 1.3.6.1.4.1.388.11.2.8.4.2.1.3 | ColumnccRadiusUsersGroups | read-create | current | List of groups associated with the user. Note that if a group is deleted, the corresponding bit pointing to that group will be cleared in this variable for all… |
| 1.3.6.1.4.1.388.11.2.8.4.2.1.4 | ColumnccRadiusUsersRowStatus | read-create | current | Row Status. |
| 1.3.6.1.4.1.388.11.2.8.5 | NodeccRadiusAccess | |||
| 1.3.6.1.4.1.388.11.2.8.5.1 | TableccRadiusAccessTable | not-accessible | obsolete | Table of Access Policy entries. |
| 1.3.6.1.4.1.388.11.2.8.5.1.1 | RowccRadiusAccessEntry | not-accessible | obsolete | Acess table entry specifying the the WLANs allowed for each group |
| 1.3.6.1.4.1.388.11.2.8.5.1.1.2 | ColumnccRadiusAccessWlanPtrs | read-write | obsolete | Points to the zero or more WLANs for which the given GroupId is allowed access. |
| 1.3.6.1.4.1.388.11.2.1000 | NodeccGroups | |||
| 1.3.6.1.4.1.388.11.2.1000.1 | NodeccGroupsV1dot0 | |||
| 1.3.6.1.4.1.388.11.2.1000.1.1 | GroupccAdminGroup | current | ||
| 1.3.6.1.4.1.388.11.2.1000.1.2 | GroupccNotificationsGroup | current | ||
| 1.3.6.1.4.1.388.11.2.1000.1.3 | GroupccApGroup | current | ||
| 1.3.6.1.4.1.388.11.2.1000.1.4 | GroupccPortalGroup | current | ||
| 1.3.6.1.4.1.388.11.2.1000.1.5 | GroupccAssociationGroup | current | ||
| 1.3.6.1.4.1.388.11.2.1000.1.6 | GroupccMuGroup | current | ||
| 1.3.6.1.4.1.388.11.2.1000.2 | NodeccGroupsV1dot5 | |||
| 1.3.6.1.4.1.388.11.2.1000.2.1 | GroupccGroupsV1dot5variables | current | variables implemented in v1.5 | |
| 1.3.6.1.4.1.388.11.2.1000.2.2 | GroupccGroupsV1dot5obsoleted | obsolete | variables obsoleted in v1.5 | |
| 1.3.6.1.4.1.388.11.2.1000.2.3 | GroupccGroupsV1dot5notifications | current | notifications implemented in v1.5 | |
| 1.3.6.1.4.1.388.11.2.1000.3 | NodeccGroupsV2dot0 | |||
| 1.3.6.1.4.1.388.11.2.1000.3.1 | GroupccGroupsV2dot0variables | current | Description. | |
| 1.3.6.1.4.1.388.11.2.1000.3.2 | GroupccGroupsV2dot0obsoleted | obsolete | Description. | |
| 1.3.6.1.4.1.388.11.2.1000.3.3 | GroupccGroupsV2dot0notifications | current | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateAndTime | OCTET STRING (SIZE (0..255)) | current | A date-time specification. field octets contents range 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction fr… |
| RowStatus | INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } | current | The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |