SYMBOL-WS5000-MIB
1761 objects
Description.
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.388 | Nodesymbol | |||
| 1.3.6.1.4.1.388.6 | NodesymbolCC | |||
| 1.3.6.1.4.1.388.6.0 | Identityws5000 | current | sysOID value for Wireless Switch 5000; (not the family of 5000s, but the actual older 5000 hardware with 128Mb DRAM, 128Mb DOM, 100Mb Ethernet ports). This sys… | |
| 1.3.6.1.4.1.388.6.0.1 | Identityws5100 | current | sysOID value for Wireless Switch 5100; (the new hardware first shipping around 7/2004, first supported via software v1.3; upgraded to 256Mb DRAM, 256Mb DOM, 10… | |
| 1.3.6.1.4.1.388.6.1 | NodesymbolCCSystem | |||
| 1.3.6.1.4.1.388.6.1.1 | NodeccSysCfg | |||
| 1.3.6.1.4.1.388.6.1.1.1 | ScalarccModuleName | read-write | current | The name of the Wireless Switch. Changing the switch name will require the KDC configuration to be recreated if it is currently configured. Note that the follo… |
| 1.3.6.1.4.1.388.6.1.1.2 | ScalarccModuleDesc | read-write | current | A description of the Wireless Switch module. Ex. <Butterfly@Symbol Technologies> |
| 1.3.6.1.4.1.388.6.1.1.3 | ScalarccManufacture | read-only | current | The manufacturer of the Wireless Switch. |
| 1.3.6.1.4.1.388.6.1.1.4 | ScalarccCopyright | read-only | current | The Copyright information about the Wireless Switch. |
| 1.3.6.1.4.1.388.6.1.1.5 | ScalarccModuleVer | read-only | current | The software version for this model. |
| 1.3.6.1.4.1.388.6.1.1.6 | ScalarccMaxNumAP | read-only | current | The maximum number of Access Ports supported by the Wireless Switch. |
| 1.3.6.1.4.1.388.6.1.1.7 | ScalarccMaxNumMu | read-only | current | The maxium number of Mobile Unit supported by the Wireless Switch. |
| 1.3.6.1.4.1.388.6.1.1.8 | ScalarccActivePolicy | read-write | current | The current Wireless Switch policy for this model. |
| 1.3.6.1.4.1.388.6.1.1.9 | ScalarccTaf | read-write | current | The object is for running TAF executable. Ex. 1. 'addgw $1 $2' addgw: Add a new gateway into the system routing table. $1: new gateway IP $2: IP family More us… |
| 1.3.6.1.4.1.388.6.1.1.10 | ScalarccSnmpOpers | read-write | current | This object should be one of the following value: 0 - Soft Kill == Save the current changes in the agent and terminate the agent. 1 - Hard Kill == Just termina… |
| 1.3.6.1.4.1.388.6.1.1.11 | ScalarccUptime | read-only | current | The time since when the Wireless Switch has been up. |
| 1.3.6.1.4.1.388.6.1.1.12 | ScalarccFTP | read-only | current | The status of FTP in the Wireless Switch. True implies that FTP is on. |
| 1.3.6.1.4.1.388.6.1.1.13 | ScalarccTelnet | read-only | current | The status of Telnet in the Wireless Switch. True implies that Telnet is on. |
| 1.3.6.1.4.1.388.6.1.1.14 | ScalarccWeb | read-only | current | Returns 'http' or 'https' depending on whether SSL is being used by the web server or not. |
| 1.3.6.1.4.1.388.6.1.1.15 | ScalarccSNMPFlag | read-write | current | A 'true' as input forces the Wireless Switch to re-read the SNMP Trap configuration. 'false' is not an acceptable input. This object is SET-only. |
| 1.3.6.1.4.1.388.6.1.1.16 | ScalarccTime | read-write | current | Set CC time and timezone. Here's the format: 'yyyy/mm/dd hh:mm:dd timezone daylight', where, yyyy = 4 digit of year mm = 2 digit of month [1-12] dd = 2 digit o… |
| 1.3.6.1.4.1.388.6.1.1.17 | ScalarccSNMPKdc | read-write | current | Regardless of the input value, always to disable Snmp KDC feature. After disabling the KDC feature, there is no data returned from the OID tree <ccOnBoardKerbe… |
| 1.3.6.1.4.1.388.6.1.1.18 | ScalarccCliKdc | read-write | current | Regardless of the input value, always to disable CLI Kdc feature. |
| 1.3.6.1.4.1.388.6.1.1.19 | ScalarccPolicyAddObj | read-write | current | Add one Wireless Switch Policy for this Wireless Switch object. The maximum number of characters allowed is 50, and the following characters cannot be part of … |
| 1.3.6.1.4.1.388.6.1.1.20 | ScalarccPolicyRemObj | read-write | current | Remove one Wireless Switch Policy for this Wireless Switch object. The maximum number of characters allowed is 50, and the following characters cannot be part … |
| 1.3.6.1.4.1.388.6.1.1.23 | ScalarccLicenseCount | read-only | current | The number of licenses issued to the WS-5000 Wireless Switch. (the number of AP that the switch can adopt at the current state) Note: The number of AP that the… |
| 1.3.6.1.4.1.388.6.1.1.24 | ScalarccEmergencyPolicy | read-write | current | The policy which will become the emergency active policy for the switch. In order to undefine an emergency policy, leave the input blank while SETting this var… |
| 1.3.6.1.4.1.388.6.1.1.25 | ScalarccEmergencyMode | read-write | current | 'true' activates the emergency mode. Which means that the switch will immediately start working under the emergency policy if 'true' is sent. 'false' will deac… |
| 1.3.6.1.4.1.388.6.1.1.26 | ScalarccRunACS | read-write | current | Setting it to 'true' will run Automatic Channel Selection. 'false' is not an acceptable input. This object is SET-only. |
| 1.3.6.1.4.1.388.6.1.1.27 | ScalarccEnableSNMPTrap | read-write | current | Enable/Disable the trap functionality in the switch. 'true' enables it, 'false' disables it |
| 1.3.6.1.4.1.388.6.1.1.28 | ScalarccEnableWVPNSupport | read-write | current | Enable(1)/Disable(2) WVPN Support. This will reboot the switch and subsequent reboots will have WVPN enabled at startup. Enable(1)/Disable(2) WVPN Support. syn… |
| 1.3.6.1.4.1.388.6.1.1.29 | ScalarccEnableRap | read-write | current | Enable the Rogue AP feature on the switch. To begin RogueAP detection, ccDetectorAP has to be enabled for an active AP. |
| 1.3.6.1.4.1.388.6.1.1.30 | ScalarccAPTxPPS | read-only | current | Display packets transmitted per sec by all APs adapted to WS. |
| 1.3.6.1.4.1.388.6.1.1.31 | ScalarccAPRxPPS | read-only | current | Display packets received per sec by all APs adopted to WS |
| 1.3.6.1.4.1.388.6.1.1.32 | ScalarccAvgTxRetry | read-only | current | Display transmit retry packets by all AP's adopted to WS |
| 1.3.6.1.4.1.388.6.1.1.33 | ScalarccAvgRSSI | read-only | current | Display avg Receive Signal Strength Indicator(RSSI) for the WS. |
| 1.3.6.1.4.1.388.6.1.1.34 | ScalarccAvgSNR | read-only | current | Display average Signal to Noise Ratio (SNR) for WS. |
| 1.3.6.1.4.1.388.6.1.1.49 | ScalarccConfigChangeLast | read-only | current | Description. Last Configuration Changed. |
| 1.3.6.1.4.1.388.6.1.1.60 | NodeccNTP | |||
| 1.3.6.1.4.1.388.6.1.1.60.1 | ScalarccNtpPrefTimeServer | read-write | current | The IP Address for the preferred time server. |
| 1.3.6.1.4.1.388.6.1.1.60.2 | ScalarccNtpFirstAltTimeServer | read-write | current | The IP Address for the first alternative time server. Note: If the other two Time Servers (prefer time server and the second time server) are invalid time serv… |
| 1.3.6.1.4.1.388.6.1.1.60.3 | ScalarccNtpSecondAltTimeServer | read-write | current | The IP Address for the second alternative time server. Note: If the other two Time Servers (prefer time server and the first time server) are invalid time serv… |
| 1.3.6.1.4.1.388.6.1.1.60.4 | ScalarccNtpGroupSetTimeServer | read-write | current | Instead of setting each object one by one, this entry can be used to set all the time servers at the same time. Input string format: <timesrv_1,timesrv_2,times… |
| 1.3.6.1.4.1.388.6.1.1.60.5 | ScalarccNtpDelAll | read-write | current | Delete all NTP servers. |
| 1.3.6.1.4.1.388.6.1.2 | TableccPolicyTable | not-accessible | current | Wireless Switch Policy Table. |
| 1.3.6.1.4.1.388.6.1.2.1 | RowccPolicyEntry | not-accessible | current | The entries of information about the Wireless Switch Policies. |
| 1.3.6.1.4.1.388.6.1.2.1.1 | ColumnccPolicyIndex | not-accessible | current | The index of the policy. |
| 1.3.6.1.4.1.388.6.1.2.1.2 | ColumnccPolicyName | read-write | current | The name of the policy. The Maximum length of the Policy Name can be 50 characters, Note that the following characters cannot be part of Policy Name field, dou… |
| 1.3.6.1.4.1.388.6.1.2.1.3 | ColumnccPolicyDesc | read-write | current | The description of the policy. The Maximum length of the description can be 128 characters, please note that the following characters cannot be part of descrip… |
| 1.3.6.1.4.1.388.6.1.2.1.4 | ColumnccPolicyCountry | read-write | current | The Country Code chosed by this policy. |
| 1.3.6.1.4.1.388.6.1.2.1.5 | ColumnccPolicyDefAdoptAPPolicy | read-write | deprecated | The default AP policy for any adopted Access Port. |
| 1.3.6.1.4.1.388.6.1.2.1.6 | ColumnccPolicyAPPolicyCount | read-only | current | The number of Access Port policies used by the Wireless Switch policy. |
| 1.3.6.1.4.1.388.6.1.2.1.7 | ColumnccPolicyAPNameOfPolicy | read-only | current | A list of AP policies applied for this ccPolicy. |
| 1.3.6.1.4.1.388.6.1.2.1.8 | ColumnccPolicyAddAPPolicy | read-write | current | Add an AP policy to the Wireless Switch Policy. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string… |
| 1.3.6.1.4.1.388.6.1.2.1.9 | ColumnccPolicyRmvAPPolicy | read-write | current | Remove an AP policy from the Wireless Switch Policy. The maximum number of characters allowed is 50, and the following characters cannot be part of the input s… |
| 1.3.6.1.4.1.388.6.1.2.1.10 | ColumnccPolicyExcludeInfo | read-write | current | Add new entries to be excluded from adoption by the WS5000 Wireless Switch, and view the current exclusion list. This table includs MAC-Start and MAC-End addre… |
| 1.3.6.1.4.1.388.6.1.2.1.11 | ColumnccPolicyExcludeEdit | read-write | current | Edit the existing Exclude Table. Note: the input string format must be in the following format: 1. <OldMacStartAddr,OldRadioType,NewMacStartAddr,NewRadioType> … |
| 1.3.6.1.4.1.388.6.1.2.1.12 | ColumnccPolicyExcludeRmv | read-write | current | Remove an existing entry from the Exclude Table in the Adoption List. Note: the input string must be in the format: <Start-MAC, RadioType>, where Start-MAC is … |
| 1.3.6.1.4.1.388.6.1.2.1.13 | ColumnccPolicyIncludeInfo | read-write | current | Add new entries to be included for adoption by the WS5000 Wireless Switch. This table includes MAC-Start and MAC-End address,the radio type, and the APPolicy w… |
| 1.3.6.1.4.1.388.6.1.2.1.14 | ColumnccPolicyIncludeEdit | read-write | current | Edit an existing entry in the Include list for adoption. The entered string should have either of the following format: 1. <OldMacStartAddr,OldRadioType,NewMac… |
| 1.3.6.1.4.1.388.6.1.2.1.15 | ColumnccPolicyIncludeRmv | read-write | current | Remove an existing entry from the Include Table in the Adoption List. Note: the input string must be in the format: <Start MAC, RadioType>, where Start-MAC is … |
| 1.3.6.1.4.1.388.6.1.2.1.16 | ColumnccPolicyEtherPolicy | read-write | current | The current active Ethernet policy for the Ethernet Port. |
| 1.3.6.1.4.1.388.6.1.2.1.17 | ColumnccPolicyTrap | read-write | current | The true(1) indicates: send a SNMP trap when deny an AP adoption. The false(2) indicates: not send a SNMP trap when deny an AP adoption |
| 1.3.6.1.4.1.388.6.1.2.1.18 | ColumnccPolicyDefChannel | read-write | deprecated | The default Channel to be used. |
| 1.3.6.1.4.1.388.6.1.2.1.19 | ColumnccPolicyDefPower | read-write | deprecated | The default power to be used (in mW). Valid values are :1,5,10,15,100. |
| 1.3.6.1.4.1.388.6.1.2.1.20 | ColumnccPolicyChannel11a | read-write | current | The Channel to be used for 11a radios. Valid values for this channel are: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161 You can also input 'auto-always' f… |
| 1.3.6.1.4.1.388.6.1.2.1.21 | ColumnccPolicyPower11a | read-write | current | The power to be used (in dbM). Valid values are :4-20 |
| 1.3.6.1.4.1.388.6.1.2.1.22 | ColumnccPolicyChannel11b | read-write | current | The Channel to be used for 11b radios. Valid values range from 1,2,3... through 14. You can also input 'auto-always' for allowing the switch to choose channels… |
| 1.3.6.1.4.1.388.6.1.2.1.23 | ColumnccPolicyPower11b | read-write | current | The power to be used (in dBm). Valid values are :4-20 |
| 1.3.6.1.4.1.388.6.1.2.1.24 | ColumnccPolicyDSCoExistence | read-write | current | Enable(true)/disable(false) FH and DS coexistence. Set for country code US,Israel,Mexico,Sri Lanka,Japan returns an error and Get returns -1. |
| 1.3.6.1.4.1.388.6.1.2.1.25 | ColumnccPolicyDefAdoptAPPolicy11a | read-write | current | The default AP policy to be used for adopted 11a radios. To clear the existing policy, leave the input blank. |
| 1.3.6.1.4.1.388.6.1.2.1.26 | ColumnccPolicyDefAdoptAPPolicy11b | read-write | current | The default AP policy to be used for adopted 11b radios. To clear the existing policy, leave the input blank. |
| 1.3.6.1.4.1.388.6.1.2.1.27 | ColumnccPolicyDefAdoptAPPolicyFH | read-write | current | The default AP policy to be used for adopted FH radios. To clear the existing policy, leave the input blank. |
| 1.3.6.1.4.1.388.6.1.2.1.28 | ColumnccPolicyDefAdoptAPPolicy11g | read-write | current | The default AP policy to be used for adopted 11g radios. To clear the existing policy, leave the input blank. |
| 1.3.6.1.4.1.388.6.1.2.1.29 | ColumnccPolicyChannel11g | read-write | current | The default Channel to be used for 11g radios. Valid values are 1 to 14. You can also input 'auto-always' for allowing the switch to choose channels automatica… |
| 1.3.6.1.4.1.388.6.1.2.1.30 | ColumnccPolicyPower11g | read-write | current | The power to be used (in dBm). Valid values are :4-20 |
| 1.3.6.1.4.1.388.6.1.3 | TableccCountryInfoTable | not-accessible | current | Country Information Table. |
| 1.3.6.1.4.1.388.6.1.3.1 | RowccCountryInfoEntry | not-accessible | current | An entry in this table indicates one country information. |
| 1.3.6.1.4.1.388.6.1.3.1.1 | ColumnccCCIndex | read-only | current | Index of the table. |
| 1.3.6.1.4.1.388.6.1.3.1.2 | ColumnccCCode | read-only | current | The Country Code for this country |
| 1.3.6.1.4.1.388.6.1.3.1.3 | ColumnccFullName | read-only | current | The name of this country. |
| 1.3.6.1.4.1.388.6.1.3.1.6 | Columncc11aChannels | read-only | current | The list of 11a channels applicable to this country. |
| 1.3.6.1.4.1.388.6.1.3.1.7 | Columncc11bChannels | read-only | current | The list of 11b channels applicable to this country. |
| 1.3.6.1.4.1.388.6.1.3.1.8 | ColumnccFHTableNum | read-only | current | The hop sequence table number |
| 1.3.6.1.4.1.388.6.1.3.1.9 | ColumnccFHChannels | read-only | current | List of all FH Channels |
| 1.3.6.1.4.1.388.6.1.3.1.10 | ColumnccFHAlgorithm | read-only | current | The algorithm used for frequency hopping. |
| 1.3.6.1.4.1.388.6.1.3.1.11 | ColumnccFHContiguous | read-only | current | Number of total contiguous channels |
| 1.3.6.1.4.1.388.6.1.3.1.12 | ColumnccFHHopSequence | read-only | current | The Hop Sequence used in the frequency hopping algorithm |
| 1.3.6.1.4.1.388.6.1.3.1.13 | Columncc11gChannels | read-only | current | The list of 11g channels applicable to this country. |
| 1.3.6.1.4.1.388.6.1.4 | NodeccOnBoardKerberos | |||
| 1.3.6.1.4.1.388.6.1.4.3 | NodekerbCfgKDC | |||
| 1.3.6.1.4.1.388.6.1.4.3.1 | ScalarkdcType | read-only | current | Represent the current KDC type MASTER/SLAVE. return string format: <master> or <slave> or <neither> Note: <neither> means that no KDC server has been configure… |
| 1.3.6.1.4.1.388.6.1.4.3.7 | ScalarmasterHost | read-only | current | The host name of a remote master KDC used by the on-board Slave-KDC. This object is valid when the onboard KDC is configured is Slave. |
| 1.3.6.1.4.1.388.6.1.4.3.8 | ScalarmasterIPAddress | read-only | current | The IP address of a remote master KDC used by the on-board Slave-KDC. only valid for creating a Slave-KDC. |
| 1.3.6.1.4.1.388.6.1.4.3.9 | ScalarcreateMsKdc | read-write | current | Configure an on-board Master KDC. Input string format: <realm,interface> Input string length limits: realm: 32 bytes interface integer The following characters… |
| 1.3.6.1.4.1.388.6.1.4.3.10 | ScalardelMsKdc | read-write | current | True will delete the Master KDC and false is an invalid input. |
| 1.3.6.1.4.1.388.6.1.4.3.11 | ScalarcreateSlvKdc | read-write | current | Configure an on-board Slave KDC. Input string format: <realm,master_hostname,master_ip,interface> Input string length limits: realm: 32 characters hostname: 50… |
| 1.3.6.1.4.1.388.6.1.4.3.12 | ScalardelSlvKdc | read-write | current | True will delete the Slave KDC and false is an invalid input. |
| 1.3.6.1.4.1.388.6.1.4.3.13 | ScalarkdcRealm | read-only | current | The REALM of the on-board KDC. The Maximum length of the KDC Realm can be 32 characters. Note that the following characters cannot be part of KDC Realm field -… |
| 1.3.6.1.4.1.388.6.1.4.3.14 | ScalarinterfaceNumber | read-only | current | The Interface this KDC is to be configured on. Valid Interface values 'ethernet1' & 'ethernet2'. |
| 1.3.6.1.4.1.388.6.1.4.3.15 | ScalaraddkdcMu | read-write | current | Add a KDC user. This is Write-only. syntax <kdcUsername,password,ticket_life> |
| 1.3.6.1.4.1.388.6.1.4.3.16 | ScalarremkdcMu | read-write | current | Remove a KDC user This is Write-only. |
| 1.3.6.1.4.1.388.6.1.4.4 | NodekerbCfgSlave | |||
| 1.3.6.1.4.1.388.6.1.4.4.1 | ScalaraddSlave | read-write | current | Add one slave kdc into the on-board Master KDC. Input string format: <hostname,domain,ip> For hostname, only the following characters are allowed: 0123456789AB… |
| 1.3.6.1.4.1.388.6.1.4.4.2 | ScalardelSlave | read-write | current | Delete one slave kdc from the on-board Master KDC. Input string format: <hostname,domain,ip> For hostname, only the following characters are allowed: 012345678… |
| 1.3.6.1.4.1.388.6.1.4.4.3 | ScalarslaveCount | read-only | current | The index of the KDC-Slave for this on-board Kerberos. |
| 1.3.6.1.4.1.388.6.1.4.4.4 | TableslaveTable | not-accessible | current | A table of remote Slave-KDC information. Then we assume that the current on-board KDC is a master KDC. |
| 1.3.6.1.4.1.388.6.1.4.4.4.1 | RowslaveEntry | not-accessible | current | The entries of information about the remote Slave-KDC. |
| 1.3.6.1.4.1.388.6.1.4.4.4.1.1 | ColumnhostName | read-only | current | The host name of a remote slave KDC. The Maximum length of the KDC Host Name can be 50 characters. For hostname, only the following characters are allowed: 012… |
| 1.3.6.1.4.1.388.6.1.4.4.4.1.2 | ColumnrealM | read-only | current | The realm for the remote Slave-KDC. The Maximum length of the KDC Realm can be 32 characters. Note that the following characters cannot be part of KDC Realm fi… |
| 1.3.6.1.4.1.388.6.1.4.4.4.1.3 | ColumnipAddress | read-only | current | The IP address of the remote Slave-KDC. |
| 1.3.6.1.4.1.388.6.1.4.4.4.1.4 | ColumndomainName | read-only | current | The domain name of a remote slave KDC. For domain, only the following characters are allowed: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-… |
| 1.3.6.1.4.1.388.6.1.4.4.4.1.5 | ColumnslaveIndex | not-accessible | current | The index of the SlaveTable |
| 1.3.6.1.4.1.388.6.1.4.4.5 | ScalarsyncDB | read-write | current | Synchronize the slave KDC database. Input string format: <hostname,domain,ip> For hostname, only the following characters are allowed: 0123456789ABCDEFGHIJKLMN… |
| 1.3.6.1.4.1.388.6.1.4.5 | NodekerbCfgNTP | |||
| 1.3.6.1.4.1.388.6.1.4.5.1 | ScalarprefTimeServer | read-write | current | The IP address for the preferred time server. |
| 1.3.6.1.4.1.388.6.1.4.5.2 | ScalarfirstAltTimeServer | read-write | current | The IP address for the first alternative time server. Note: If other two Time Server (prefer time server and the second time server ) are invalid time server i… |
| 1.3.6.1.4.1.388.6.1.4.5.3 | ScalarsecondAltTimeServer | read-write | current | The IP address for the second alternative time server. Note: If other two Time Server (prefer time server and the first time server ) are invalid time server i… |
| 1.3.6.1.4.1.388.6.1.4.5.4 | ScalargroupSetTimeServer | read-write | current | Instead of setting each object one by one, this entry can be used to set all the time servers at the same time. Input string format: <timesrv_1,timesrv_2,times… |
| 1.3.6.1.4.1.388.6.1.4.5.5 | ScalardelAll | read-write | current | Delete all of NTP servers. |
| 1.3.6.1.4.1.388.6.1.4.5.6 | ScalardelTimeServer | read-write | deprecated | Delete a Time Server.Enter either '1' or '2' or '3', to delete the preferred, first alternative server, and second alternative server respectively |
| 1.3.6.1.4.1.388.6.1.4.6 | NodekerbKDCUsers | |||
| 1.3.6.1.4.1.388.6.1.4.6.1 | TablekdcUserTable | not-accessible | current | |
| 1.3.6.1.4.1.388.6.1.4.6.1.1 | RowkdcUserEntry | not-accessible | current | The Users(MU's) in the KDC with ticketlife. |
| 1.3.6.1.4.1.388.6.1.4.6.1.1.1 | ColumnkdcUserIndex | not-accessible | current | The Index of the kdcUserEntry table. |
| 1.3.6.1.4.1.388.6.1.4.6.1.1.2 | ColumnkdcUserName | read-only | current | The list of Users(MU's) registered in the KDC. The Maximum length of the User Name can be 20 characters. Note that the following characters cannot be part of U… |
| 1.3.6.1.4.1.388.6.1.4.6.1.1.3 | ColumnkdcUserTlife | read-write | current | A Kerberos Ticket life time for this user. The range would be in (1 - 600). |
| 1.3.6.1.4.1.388.6.1.4.6.2 | TablekdcWLANTable | not-accessible | current | |
| 1.3.6.1.4.1.388.6.1.4.6.2.1 | RowkdcWLANEntry | not-accessible | current | The list of WLAN's registered in the KDC. |
| 1.3.6.1.4.1.388.6.1.4.6.2.1.1 | ColumnkdcWLANIndex | not-accessible | current | The index of the WLANs for this on-board Kerberos. |
| 1.3.6.1.4.1.388.6.1.4.6.2.1.2 | ColumnkdcWLANName | read-only | current | The name of a WLAN's which has a registered account in the On-Board KDC. |
| 1.3.6.1.4.1.388.6.1.4.6.2.1.3 | ColumnkdcWLANTlife | read-write | current | A Kerberos Ticket life time for this WLAN. The range would be in (0 - 600). |
| 1.3.6.1.4.1.388.6.1.5 | NoderadiusAuthentication | |||
| 1.3.6.1.4.1.388.6.1.5.2 | NoderadiusAuthClientMIB | |||
| 1.3.6.1.4.1.388.6.1.5.2.1 | NoderadiusAuthClientMIBObjects | |||
| 1.3.6.1.4.1.388.6.1.5.2.1.1 | NoderadiusAuthClient | |||
| 1.3.6.1.4.1.388.6.1.5.2.1.1.1 | ScalarradiusAuthClientInvalidServerAddresses | read-only | current | The number of RADIUS Access-Response packets received from unknown addresses |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3 | TableradiusAuthServerTable | not-accessible | current | The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1 | RowradiusAuthServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.1 | ColumnradiusAuthServerIndex | not-accessible | current | A number uniquely identifying each RADIUS Authentication server with which this client communicates. Note that Index 1 denotes the Primary RADIUS server, while… |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.2 | ColumnradiusAuthServerAddress | read-write | current | The IP address or the name of the RADIUS authentication server referred to in this table entry.The syntax for the input is :<host_name/IP>,<RADIUS Secret>. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.3 | ColumnradiusAuthClientServerPortNumber | read-write | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.4 | ColumnradiusAuthClientRoundTripTime | read-only | current | The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS aut… |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.5 | ColumnradiusAuthClientAccessRequests | read-only | current | The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.6 | ColumnradiusAuthClientAccessRetransmissions | read-write | current | The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.7 | ColumnradiusAuthClientAccessAccepts | read-only | current | The number of RADIUS Access-Accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.8 | ColumnradiusAuthClientAccessRejects | read-only | current | The number of RADIUS Access-Reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.9 | ColumnradiusAuthClientAccessChallenges | read-only | current | The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.10 | ColumnradiusAuthClientMalformedAccessResponses | read-only | current | The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators … |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.11 | ColumnradiusAuthClientBadAuthenticators | read-only | current | The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.12 | ColumnradiusAuthClientPendingRequests | read-only | current | The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an A… |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.13 | ColumnradiusAuthClientTimeouts | read-write | current | The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry … |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.14 | ColumnradiusAuthClientUnknownTypes | read-only | current | The number of RADIUS packets of unknown type which were received from this server on the authentication port. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.15 | ColumnradiusAuthClientPacketsDropped | read-only | current | The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason. |
| 1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.16 | ColumnradiusAuthClientIdentifier | read-only | current | The NAS identifier of the RADIUS authentication client. |
| 1.3.6.1.4.1.388.6.1.5.2.2 | NoderadiusAuthClientMIBConformance | |||
| 1.3.6.1.4.1.388.6.1.5.2.2.1 | NoderadiusAuthClientMIBCompliances | |||
| 1.3.6.1.4.1.388.6.1.5.2.2.1.1 | ComplianceradiusAuthClientMIBCompliance | current | The compliance statement for authentication clients implementing the RADIUS Authentication Client MIB. | |
| 1.3.6.1.4.1.388.6.1.5.2.2.2 | NoderadiusAuthClientMIBGroups | |||
| 1.3.6.1.4.1.388.6.1.5.2.2.2.1 | GroupradiusAuthClientMIBGroup | current | The basic collection of objects providing management of RADIUS Authentication Clients. | |
| 1.3.6.1.4.1.388.6.1.6 | NodeccEventsObjects | |||
| 1.3.6.1.4.1.388.6.1.6.1 | ScalarccEventsAllLocalLog | read-write | current | Enable/Disable local logging for all Events. This variable is SET-only. |
| 1.3.6.1.4.1.388.6.1.6.2 | ScalarccEventsAllSNMPTrap | read-write | current | Enable/Disable SNMP Trap for all Events. This variable is SET-only. |
| 1.3.6.1.4.1.388.6.1.6.3 | ScalarccEventsAllSyslog | read-write | current | Enable/Disable Syslog for all Events. In order to SET the Syslog level for all Events to a particular severity level, enter the severity level as the input. Th… |
| 1.3.6.1.4.1.388.6.1.6.4 | ScalarccEventsAllDefault | read-write | current | Set all Events to their default state. Only 'true' is a valid input. This variable is SET-only. |
| 1.3.6.1.4.1.388.6.1.6.5 | TableccEventTable | not-accessible | current | A list of Syslog predefined events |
| 1.3.6.1.4.1.388.6.1.6.5.1 | RowccEventEntry | not-accessible | current | An entry in the Events Table |
| 1.3.6.1.4.1.388.6.1.6.5.1.1 | ColumnccEventIndex | not-accessible | current | Index of an specific event. |
| 1.3.6.1.4.1.388.6.1.6.5.1.2 | ColumnccEventDescr | read-only | current | Description of an specific event. |
| 1.3.6.1.4.1.388.6.1.6.5.1.3 | ColumnccEventDefault | read-write | current | Set the event to its default state. Only 'true' is an acceptable value. This variable is SET-only. |
| 1.3.6.1.4.1.388.6.1.6.5.1.4 | ColumnccEventSyslog | read-write | current | Enable/Disable Syslog for this Event. In order to SET the Syslog level for this Event to a particular severity level, enter the severity level as the input. Th… |
| 1.3.6.1.4.1.388.6.1.6.5.1.5 | ColumnccEventSNMPTrap | read-write | current | Current SNMP-Trap's status of an specific event. Setting it to 'true' activates the SNMP trap for this particular Event, while 'false' deactivates it |
| 1.3.6.1.4.1.388.6.1.6.5.1.6 | ColumnccEventLocalLog | read-write | current | Activate/Deactivate local logging. 'true' activates local logging. 'false' deactivates local logging for this particular Event. |
| 1.3.6.1.4.1.388.6.1.6.6 | NodeccSyslogObjects | |||
| 1.3.6.1.4.1.388.6.1.6.6.1 | ScalarccSysLogStatus | read-write | current | To retrieve and set the current syslog settings within CC. Acceptable values are: True(1), False(2) |
| 1.3.6.1.4.1.388.6.1.6.6.2 | NodeccSyslogHosts | |||
| 1.3.6.1.4.1.388.6.1.6.6.2.1 | ScalarccSyslogAddHost | read-write | current | Add a new Syslog collector host. You also need to provide the IP address of the host, so the input format is : <hostname,IP Address> Only the following charact… |
| 1.3.6.1.4.1.388.6.1.6.6.2.2 | ScalarccSyslogRemHost | read-write | current | Remove an existing Syslog collector host. |
| 1.3.6.1.4.1.388.6.1.6.6.2.3 | TableccSyslogHostsTable | not-accessible | current | A list of Syslog Hosts |
| 1.3.6.1.4.1.388.6.1.6.6.2.3.1 | RowccSyslogHostsEntry | not-accessible | current | An entry in Syslog Hosts table |
| 1.3.6.1.4.1.388.6.1.6.6.2.3.1.1 | ColumnccSyslogHostIndex | not-accessible | current | Index of specific Syslog Host. |
| 1.3.6.1.4.1.388.6.1.6.6.2.3.1.2 | ColumnccSyslogHostName | read-only | current | DNS name of specific Syslog Host. |
| 1.3.6.1.4.1.388.6.1.6.6.2.3.1.3 | ColumnccSyslogHostIPAddr | read-write | current | IP address of the Syslog Host |
| 1.3.6.1.4.1.388.6.1.6.6.2.3.1.4 | ColumnccSyslogHostDomain | read-write | current | Domain Name of the Syslog Host. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs… |
| 1.3.6.1.4.1.388.6.1.6.6.2.3.1.5 | ColumnccSyslogHostSetSeverity | read-write | current | Set the severity level for which this particular host will receive syslog messages. The input format is: <SeverityLevel/'all','on'/'off'> where SeverityLevel c… |
| 1.3.6.1.4.1.388.6.1.6.6.2.3.1.6 | ColumnccSyslogHostSeverityList | read-only | current | The list of all severity levels whose messages this host is configured to receive. |
| 1.3.6.1.4.1.388.6.1.7 | NodeccSystemHosts | |||
| 1.3.6.1.4.1.388.6.1.7.1 | ScalarccSystemAddHost | read-write | current | Add a new System Host. You also need to provide the IP address of the host, so the input format is : <hostname,IP Address> Only the following characters can be… |
| 1.3.6.1.4.1.388.6.1.7.2 | ScalarccSystemRemHost | read-write | current | Remove an existing System Host. |
| 1.3.6.1.4.1.388.6.1.7.3 | TableccSystemHostsTable | not-accessible | current | A list of Syslog Hosts |
| 1.3.6.1.4.1.388.6.1.7.3.1 | RowccSystemHostsEntry | not-accessible | current | An entry in Syslog Hosts table |
| 1.3.6.1.4.1.388.6.1.7.3.1.1 | ColumnccSystemHostIndex | not-accessible | current | Index of specific System Host. |
| 1.3.6.1.4.1.388.6.1.7.3.1.2 | ColumnccSystemHostName | read-only | current | DNS name of specific System Host. |
| 1.3.6.1.4.1.388.6.1.7.3.1.3 | ColumnccSystemHostIPAddr | read-write | current | IP address of the System Host |
| 1.3.6.1.4.1.388.6.1.7.3.1.4 | ColumnccSystemHostDomain | read-write | current | Domain Name of the System Host. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs… |
| 1.3.6.1.4.1.388.6.1.8 | NodeccPolicyRCObjects | |||
| 1.3.6.1.4.1.388.6.1.8.1 | TableccPolicyRCAddRemTable | not-accessible | current | A list of objects used to add/remove items from the Restricted channels list |
| 1.3.6.1.4.1.388.6.1.8.1.1 | RowccPolicyRCAddRemEntry | not-accessible | current | An entry in the table of RC Add Remove objects. The two indices are ccPolicyIndex and ccPolicyRadioType. ccPolicyIndex is taken from the ccPolicyTable, and spe… |
| 1.3.6.1.4.1.388.6.1.8.1.1.1 | ColumnccPolicyRadioType | not-accessible | current | ccPolicyRadioType is used as one of the indicies to specify the type of the radio (A or B) to which the Restricted Channel table belongs. A value of 1 for this… |
| 1.3.6.1.4.1.388.6.1.8.1.1.2 | ColumnccPolicyRCAdd | read-write | current | Add an entry into the RC Table for this CCPolicy and radiotype. If you want to specify a reason for declaring a particular channel as a restricted channel, you… |
| 1.3.6.1.4.1.388.6.1.8.1.1.3 | ColumnccPolicyRCRem | read-write | current | Remove an entry from the RC Table for this CCPolicy and radiotype. You just need to specify the channel number which you want to be removed from the table. |
| 1.3.6.1.4.1.388.6.1.8.2 | TableccPolicyRCTable | not-accessible | current | A list of restricted channels and their descriptions. (Per CCPolicy, per RadioType) |
| 1.3.6.1.4.1.388.6.1.8.2.1 | RowccPolicyRCEntry | not-accessible | current | An entry in the Restricted Channels table. The three indices are ccPolicyIndex,ccPolicyRadioType, and ccPolicyRcIndex. ccPolicyIndex is taken from the ccPolicy… |
| 1.3.6.1.4.1.388.6.1.8.2.1.1 | ColumnccPolicyRcIndex | not-accessible | current | The index of the restricted channel |
| 1.3.6.1.4.1.388.6.1.8.2.1.2 | ColumnccPolicyRCChannelDescr | read-only | current | The channel number and description,at this particular index in the Restricted channel table. The returned string is in the format <channel,description>. Note t… |
| 1.3.6.1.4.1.388.6.1.9 | NodeccPolicyObject | |||
| 1.3.6.1.4.1.388.6.1.9.2 | TableccPolicyAPPolicyTable | not-accessible | current | Table of APPolicies per Wireless Switch Policy |
| 1.3.6.1.4.1.388.6.1.9.2.1 | RowccPolicyAPPolicyEntry | not-accessible | current | The entries of APPolicies per Wireless Switch Policy. |
| 1.3.6.1.4.1.388.6.1.9.2.1.1 | ColumnccPolicyAPPolicyIndex | not-accessible | current | The index of the AP policy. |
| 1.3.6.1.4.1.388.6.1.9.2.1.2 | ColumnccPolicyAPPolicyName | read-only | current | A list of AP policies applied for this Switch Policy. |
| 1.3.6.1.4.1.388.6.2 | NodesymbolCCInterfaces | |||
| 1.3.6.1.4.1.388.6.2.1 | ScalarccAPPolicyAddObj | read-write | current | Add one AP Policy object into the AP Policy table. The Maximum length of the AP Policy Name can be 50 characters, Note that the following characters cannot be … |
| 1.3.6.1.4.1.388.6.2.2 | ScalarccAPPolicyRemObj | read-write | current | Remove one AP Policy object from the AP Policy table. |
| 1.3.6.1.4.1.388.6.2.3 | ScalarccEPPAddObj | read-write | current | Add one Ethernet policy object into the EPP table. The Maximum length of the Ethernet Policy Name can be 50 characters,Note that the following characters canno… |
| 1.3.6.1.4.1.388.6.2.4 | ScalarccEPPRemObj | read-write | current | Remove one Ethernet policy object from the EPP table. The Maximum length of the Ethernet Policy Name can be 50 characters,Note that the following characters ca… |
| 1.3.6.1.4.1.388.6.2.5 | ScalarccAccessPortAddObj | read-write | current | Add an access port. The input string should have the following syntax: <dev_mac,dev_type,radio1_name,radio1_mac,radio2_name,radio2_mac>. dev_mac is the mac add… |
| 1.3.6.1.4.1.388.6.2.6 | ScalarccAccessPortRemObj | read-write | current | Remove an AccessPort syntax :<port name> When a ap200/ap300 Access port is removed both the radio macs are removed. |
| 1.3.6.1.4.1.388.6.2.7 | ScalarccFWLanAddObj | read-write | current | Add a LAN to the system. |
| 1.3.6.1.4.1.388.6.2.8 | ScalarccFWLanRemObj | read-write | current | Remove the LAN from the system. |
| 1.3.6.1.4.1.388.6.2.10 | TableccAPTable | not-accessible | current | The Table of AccessPorts. |
| 1.3.6.1.4.1.388.6.2.10.1 | RowccAPEntry | not-accessible | current | An AccessPort Configuration entry. |
| 1.3.6.1.4.1.388.6.2.10.1.28 | ColumnccRadioIndex | not-accessible | current | The Index for the Access port. |
| 1.3.6.1.4.1.388.6.2.10.1.29 | ColumnccRadioName | read-write | current | The Name of the Access port. The Maximum length of the Radio Name can be 50 characters. Note that the following characters cannot be part of Radio Name field -… |
| 1.3.6.1.4.1.388.6.2.10.1.30 | ColumnccRadioDesc | read-write | current | The description of the Access port. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of descripti… |
| 1.3.6.1.4.1.388.6.2.10.1.31 | ColumnccRadioOnlineStatus | read-only | current | Online status for this Access port. 0(zero) means 'unavailable' or non-existent. 1 means 'active',, i.e. functional 2 means 'inactive',existent but not functio… |
| 1.3.6.1.4.1.388.6.2.10.1.32 | ColumnccRadioMAC | read-only | current | The MAC address of this radio. |
| 1.3.6.1.4.1.388.6.2.10.1.33 | ColumnccDeviceMAC | read-only | current | The MAC address of the device to which this radio belongs. |
| 1.3.6.1.4.1.388.6.2.10.1.34 | ColumnccDeviceLocation | read-write | current | The location of this device. |
| 1.3.6.1.4.1.388.6.2.10.1.35 | ColumnccRadioType | read-only | current | The type of this radio. 'A' or 'B' denote 802.11a and 802.11b respectively. 'FH' denotes an FH radio. |
| 1.3.6.1.4.1.388.6.2.10.1.36 | ColumnccRadioChannel | read-write | current | The channel on which this radio is operating. Valid values for 11a are:34,36,38,40...64. Valid values for 11b are:1,2,3,...14. Also, 'auto-once' is a valid cha… |
| 1.3.6.1.4.1.388.6.2.10.1.37 | ColumnccRadioPower | read-only | deprecated | The power on which this radio is operating. Valid values for both 11a and 11b are :1,5,15,30,Full. |
| 1.3.6.1.4.1.388.6.2.10.1.38 | ColumnccRadioPolicy | read-write | current | The policy governing this radio. To clear the existing policy, leave the input blank. |
| 1.3.6.1.4.1.388.6.2.10.1.39 | ColumnccDeviceNic | read-only | current | The NIC number on which this device is connected to the WS5000 wireless Switch. Valid Values are 1 or 2 |
| 1.3.6.1.4.1.388.6.2.10.1.40 | ColumnccDeviceType | read-only | current | The type of the device. Expect either of 'AP200','AP100','AP300','AP4121','AP3020/3021' as the value. |
| 1.3.6.1.4.1.388.6.2.10.1.41 | ColumnccRadioCCAmode | read-write | current | The CCA Mode for the Access port. |
| 1.3.6.1.4.1.388.6.2.10.1.42 | ColumnccRadioCCAthresh | read-write | current | The CCA threshold for the Access port. |
| 1.3.6.1.4.1.388.6.2.10.1.43 | ColumnccRadioDiversity | read-write | current | The antenna setting for the Access Port. Valid values are 0,1 and 2. 0 indicates Full, 1 indicates primary, and 2 indicates secondary. |
| 1.3.6.1.4.1.388.6.2.10.1.44 | ColumnccDeviceVlanid | read-only | current | The VLAN id for the Access port. |
| 1.3.6.1.4.1.388.6.2.10.1.45 | ColumnccDeviceVlanTagsSeen | read-only | current | The Vlan Tags seen by this device. |
| 1.3.6.1.4.1.388.6.2.10.1.46 | ColumnccRadioUptime | read-only | current | The time for which this radio has been up. |
| 1.3.6.1.4.1.388.6.2.10.1.47 | ColumnccRadioTxpps | read-only | current | The number of packets transmitted per second between AP and MU. |
| 1.3.6.1.4.1.388.6.2.10.1.48 | ColumnccRadioMUs | read-only | current | The number of MUs associated with this radio. |
| 1.3.6.1.4.1.388.6.2.10.1.49 | ColumnccRadioGatherStatistics | read-write | current | true(1)/false(2) to turn on/off the functionality of gathering AP statistic data. |
| 1.3.6.1.4.1.388.6.2.10.1.50 | ColumnccRadioReset | read-write | current | A 'true' as input will reset the Radio. 'false' is not an acceptable input. Note that a Reset message can be sent out only if the radio is in 'active' state. T… |
| 1.3.6.1.4.1.388.6.2.10.1.51 | ColumnccDeviceClearSeenVlanTags | read-write | deprecated | true(1) will clear the seen Vlans |
| 1.3.6.1.4.1.388.6.2.10.1.52 | ColumnccDeviceReset | read-write | current | A 'true' as input will reset the Device. 'false' is not an acceptable input. This object is SET-only. |
| 1.3.6.1.4.1.388.6.2.10.1.53 | ColumnccRadioAuto | read-only | deprecated | 'true' enables ACS-on-adoption for this particular radio.'false' disables it. |
| 1.3.6.1.4.1.388.6.2.10.1.54 | ColumnccRadioMUPower | read-only | deprecated | The power value to be put in the beacon of this radio. Valid values are : 1,5,15,30,Full,default. Note that 'default' as input causes the beacon to have the sa… |
| 1.3.6.1.4.1.388.6.2.10.1.55 | ColumnccRadioProtection | read-only | current | Defines whether 'Protection' is On or Off. |
| 1.3.6.1.4.1.388.6.2.10.1.56 | ColumnccRadioShortSlot | read-only | current | Defines whether Short Slot is On or Off. |
| 1.3.6.1.4.1.388.6.2.10.1.57 | ColumnccRadioAntenna | read-only | current | Defines whether antenna type is internal, external or unknown. |
| 1.3.6.1.4.1.388.6.2.10.1.58 | ColumnccRadioCurrentChannel | read-only | current | Current channel. |
| 1.3.6.1.4.1.388.6.2.10.1.59 | ColumnccRadioAllChannels | read-only | current | A comma seperated list of all channels valid for this radio. |
| 1.3.6.1.4.1.388.6.2.10.1.60 | ColumnccRadioPowerdBm | read-write | current | The power on which the radio is configured to operate in dBm. Valid range depends on the country and radio configuration. It is as defined in the 'ccRadioAllPo… |
| 1.3.6.1.4.1.388.6.2.10.1.61 | ColumnccRadioCurrentPower | read-only | current | The power on which the radio is currently operating in dBm. |
| 1.3.6.1.4.1.388.6.2.10.1.62 | ColumnccRadioAllPower | read-only | current | The valid power range for the radio in the format 'min_power-max_power'. |
| 1.3.6.1.4.1.388.6.2.10.1.63 | ColumnccRadioMUPowerdBm | read-write | current | Power level adjustment for MU. The valid range is -20 to 20 dB. |
| 1.3.6.1.4.1.388.6.2.10.1.64 | ColumnccRadioAntCorrection | read-write | current | Antenna correction factor. The valid range is -20 to 20dBi. Note:This OID is supported only for AP300 device with external antenna |
| 1.3.6.1.4.1.388.6.2.10.1.65 | ColumnccRadioIndoor | read-write | current | Radio location indoor or outdoor. Valid values are 'in' or 'out'. Note:This OID is supported only for AP300 device with external antenna |
| 1.3.6.1.4.1.388.6.2.10.1.66 | ColumnccRadioDFS | read-only | current | DFS status. Valid values are:off,on,active,channel scan. Supported only for 11a radio. |
| 1.3.6.1.4.1.388.6.2.10.1.67 | ColumnccRadioTPC | read-only | current | TPC status. Valid values are: off,on. Supported only for 11a radio. |
| 1.3.6.1.4.1.388.6.2.10.1.68 | ColumnccRadioRadarChannels | read-only | current | A comma seperated list of all channels with timestamps where radar was detected. |
| 1.3.6.1.4.1.388.6.2.10.1.69 | ColumnccDetectorAp | read-write | current | If this is enabled, the switch uses this AP to detect Rogue APs. |
| 1.3.6.1.4.1.388.6.2.10.1.70 | ColumnccRadioMaxMUs | read-write | current | The number of maximum MUs for the Access port |
| 1.3.6.1.4.1.388.6.2.10.1.71 | ColumnccSimulateRadar | read-write | current | True(1) value will set simulateradar. Setting it true sets the Dwell time value. Note: A get over it always return idealState(2) and this OID is supported only… |
| 1.3.6.1.4.1.388.6.2.10.1.72 | ColumnccRadioUser802x | read-write | current | Set the 802.1x user name and password Syntax: <user name>,<password> Note: This OID is supported only for AP300 device type The maximum length of user and pass… |
| 1.3.6.1.4.1.388.6.2.11 | TableccAPPolicyTable | not-accessible | current | APPolicy Table. |
| 1.3.6.1.4.1.388.6.2.11.1 | RowccAPPolicyEntry | not-accessible | current | An entry in this table indicates the interface policy information. |
| 1.3.6.1.4.1.388.6.2.11.1.1 | ColumnccAPPolicyIndex | not-accessible | current | The index of the AP policy. |
| 1.3.6.1.4.1.388.6.2.11.1.2 | ColumnccAPPolicyName | read-write | current | The name of the policy. The Maximum length of the Policy Name can be 50 characters, Note that the following characters cannot be part of Policy Name field, dou… |
| 1.3.6.1.4.1.388.6.2.11.1.3 | ColumnccAPPolicyDesc | read-write | current | The description of the AP policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description… |
| 1.3.6.1.4.1.388.6.2.11.1.10 | ColumnccAPPolicyPreAmble | read-write | current | Long/Short preamble feature for the WLANs in this APPolicy. |
| 1.3.6.1.4.1.388.6.2.11.1.11 | ColumnccAPPolicyBeaconInterval | read-write | current | The interval at which beacons are transmitted. Valid values are between 20 to 1000 |
| 1.3.6.1.4.1.388.6.2.11.1.12 | ColumnccAPPolicyRTSThreshold | read-write | current | The RTS (Request To Send) threshold for this WLAN. This threshold means that any unicast data or management frames larger than this setting must be transmitted… |
| 1.3.6.1.4.1.388.6.2.11.1.13 | ColumnccAPPolicyDTIM | read-write | current | This setting, always a multiple of the beacon period, determines how often the beacon contains a delivery traffic indication message(DTIM). The DTIM tells powe… |
| 1.3.6.1.4.1.388.6.2.11.1.14 | ColumnccAPPolicyBasicRates11a | read-write | current | The Basic Rate set for 11a radios which shall be governed by this policy. Valid values could be any combination of 6,9,12,18,24,36,48,54. |
| 1.3.6.1.4.1.388.6.2.11.1.15 | ColumnccAPPolicySupportedRates11a | read-write | current | The Supported Rate set for 11a radios which shall be governed by this policy. Valid values could be any combination of 6,9,12,18,24,36,48,54 |
| 1.3.6.1.4.1.388.6.2.11.1.16 | ColumnccAPPolicyBasicRates11b | read-write | current | The Basic Rate set for 11b radios which shall be governed by this policy. Valid values are any combination of 1,2,5.5,11 |
| 1.3.6.1.4.1.388.6.2.11.1.17 | ColumnccAPPolicySupportedRates11b | read-write | current | The Supported Rate set for 11b radios which shall be governed by this policy. Valid values are any combination of 1,2,5.5,11 |
| 1.3.6.1.4.1.388.6.2.11.1.18 | ColumnccAPPolicyBasicRatesFH | read-write | current | The Basic Rate set for FH radios which shall be governed by this policy. Valid values are any combination of 1 and 2 |
| 1.3.6.1.4.1.388.6.2.11.1.19 | ColumnccAPPolicySupportedRatesFH | read-write | current | The Supported Rate set for FH radios which shall be governed by this policy. Valid values are any combination of 1 and 2, or blank |
| 1.3.6.1.4.1.388.6.2.11.1.20 | ColumnccAPPolicyBasicRates11g | read-write | current | The Basic Rate set for 11g radios that shall be governed by this policy. Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54. |
| 1.3.6.1.4.1.388.6.2.11.1.21 | ColumnccAPPolicySupportedRates11g | read-write | current | The Supported Rate set for 11g radios that shall be governed by this policy. Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54 or blan… |
| 1.3.6.1.4.1.388.6.2.11.1.22 | ColumnccAPPolicyNonSpectrumMgmt | read-write | current | Allow non DFC/TPC MU to associate when spectrum management is required. Valid values:true,false. |
| 1.3.6.1.4.1.388.6.2.11.1.23 | ColumnccAPPolicyAddAllWlan | read-write | current | Add a WLAN to a Access Port Policy, WLAN added should be a valid WLAN and should not have already been added to this policy. Upto 16 WLANs can be added to a AP… |
| 1.3.6.1.4.1.388.6.2.11.1.24 | ColumnccAPPolicyRemAllWlan | read-write | current | Removes a WLAN from a Access Port Policy. The WLAN to be removed should have already been added to this policy. Thw WLAN will be removed from all the mappings … |
| 1.3.6.1.4.1.388.6.2.11.1.25 | ColumnccAPPolicyWMEEnable | read-write | current | Description. Enable/Disable of WME for APPolicy |
| 1.3.6.1.4.1.388.6.2.11.1.26 | ColumnccAPPolicyWMEProfile | read-write | current | Description. WME Profile of APpolicy. |
| 1.3.6.1.4.1.388.6.2.11.1.27 | ColumnccAPPolicyDTIM2 | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.2.11.1.28 | ColumnccAPPolicyDTIM3 | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.2.11.1.29 | ColumnccAPPolicyDTIM4 | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.2.12 | TableccEPTable | not-accessible | current | EtherPorts entries. |
| 1.3.6.1.4.1.388.6.2.12.1 | RowccEPEntry | not-accessible | current | An ethernet port configuration entry. |
| 1.3.6.1.4.1.388.6.2.12.1.1 | ColumnccEPIndex | read-only | current | The Index for the Ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.2 | ColumnccEPNic | read-only | current | This number indicates an index of NIC cards in the system. |
| 1.3.6.1.4.1.388.6.2.12.1.3 | ColumnccEPName | read-only | current | The Name of this ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.4 | ColumnccEPDesc | read-write | current | The detailed description for the ethernet port. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part … |
| 1.3.6.1.4.1.388.6.2.12.1.5 | ColumnccEPMacAddr | read-only | current | The Mac address for the Ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.6 | ColumnccEPEnable | read-write | current | Enable/Disable the ethernet port to be a 802.1q Trunk port. Syntax:For enabling <1,PrimaryVLanId> For disabling <0>. |
| 1.3.6.1.4.1.388.6.2.12.1.7 | ColumnccEPSpeed | read-only | deprecated | The speed of the ethernet port, such as 10 means the 10 Mps or 100 means 100 Mps. |
| 1.3.6.1.4.1.388.6.2.12.1.8 | ColumnccEPEnableDHCP | read-write | current | Enable/Disable DHCP server for this Ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.9 | ColumnccEPIPAddr | read-write | current | The IP address of Ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.10 | ColumnccEPNetMask | read-write | current | The netmask address for the Ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.13 | ColumnccEPDnsCount | read-only | current | The number of DNS used by the ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.14 | ColumnccEPDnsList | read-only | current | A list of DNS address for Ethernet port. |
| 1.3.6.1.4.1.388.6.2.12.1.15 | ColumnccEPPrimaryVid | read-write | current | Primary VLANId for this etherport. Note: 0 or 4096 means non-trunked(no VLAN) |
| 1.3.6.1.4.1.388.6.2.12.1.16 | ColumnccEPOnline | read-only | current | false(2) means the online status of the ethernet port is NOT Active. true(1) means the ethernet port is Active. |
| 1.3.6.1.4.1.388.6.2.12.1.17 | ColumnccEPDisplayName | read-only | current | The user-friendly name of the Ethernet Port. |
| 1.3.6.1.4.1.388.6.2.12.1.18 | ColumnccEPUptime | read-only | current | The time elapsed since the EtherPort has been up. |
| 1.3.6.1.4.1.388.6.2.12.1.19 | ColumnccEPTx | read-only | current | The number of output packets transmitted. |
| 1.3.6.1.4.1.388.6.2.12.1.20 | ColumnccEPRx | read-only | current | The number of input packets received. |
| 1.3.6.1.4.1.388.6.2.12.1.21 | ColumnccEPDomain | read-write | current | The domain name on this Ethernet Port. Note that only the following characters are allowed in the domain name: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijkl… |
| 1.3.6.1.4.1.388.6.2.12.1.22 | ColumnccEPGateway | read-only | current | The gateway address being used by the Ethernet port. Note:To add a gateway use ccTaf OID. |
| 1.3.6.1.4.1.388.6.2.12.1.23 | ColumnccEPCFGMode | read-write | current | The configured mode of this Etherport. Valid inputs are : '10_half','10_full','100_half', '100_full','auto'. |
| 1.3.6.1.4.1.388.6.2.12.1.24 | ColumnccEPDuplex | read-only | current | Negotiated mode - duplex |
| 1.3.6.1.4.1.388.6.2.12.1.25 | ColumnccEPMode | read-only | current | Negotiated mode - speed |
| 1.3.6.1.4.1.388.6.2.12.1.26 | ColumnccEPDhcpPriVlan | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.2.12.1.27 | ColumnccEPDDNSStatus | read-write | current | Enable (1) / Disable (2) DDNS updates by DHCP Server |
| 1.3.6.1.4.1.388.6.2.12.1.28 | ColumnccEPDDNSttl | read-write | current | TTL for DDNS |
| 1.3.6.1.4.1.388.6.2.12.1.29 | ColumnccEPDDNSUpdateAll | read-write | current | Update all DDNS entries |
| 1.3.6.1.4.1.388.6.2.12.1.30 | ColumnccEPDDNSMUserStatus | read-write | current | Enable (1) / Disable (2) RFC 3004 Multiple User Class |
| 1.3.6.1.4.1.388.6.2.12.1.31 | ColumnccEPDDNSDomainName | read-write | current | the domain to be updated by DDNS |
| 1.3.6.1.4.1.388.6.2.13 | TableccEPPTable | not-accessible | current | A list of Ethernet port policy entries. |
| 1.3.6.1.4.1.388.6.2.13.1 | RowccEPPEntry | not-accessible | current | An Ethernet port policy entry. |
| 1.3.6.1.4.1.388.6.2.13.1.1 | ColumnccEPPIndex | read-only | current | The Index for the Ethernet policy. |
| 1.3.6.1.4.1.388.6.2.13.1.2 | ColumnccEPPName | read-only | current | Ethernet policy name for one record. |
| 1.3.6.1.4.1.388.6.2.13.1.3 | ColumnccEPPAlias | read-write | current | The Alias for this EtherPort Policy. The Maximum length of the EP Policy Name can be 50 characters. Note that the following characters cannot be part of EP Pol… |
| 1.3.6.1.4.1.388.6.2.13.1.4 | ColumnccEPPDesc | read-write | current | A description about this ethernet policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of des… |
| 1.3.6.1.4.1.388.6.2.13.1.5 | ColumnccEPPRonnic | read-write | current | This object indicates a NIC port number through which the WS-5000 Wireless Switch will talk to the rest of network. That means, in case of NO VLAN, every incom… |
| 1.3.6.1.4.1.388.6.2.13.1.6 | ColumnccEPPVlanCount | read-only | current | The number of VLANs attached to the Ethernet policy. |
| 1.3.6.1.4.1.388.6.2.13.1.7 | ColumnccEPPVlanList | read-only | current | Show a list of VLAN objects attatched to this ethernet policy. Display Format LAN1,LAN2,VLAN:Interface number |
| 1.3.6.1.4.1.388.6.2.13.1.8 | ColumnccEPPCreateNewVlan | read-write | current | Create a new VLAN in this EtherPort Policy. The input has to be of the format: <VlanID,NicNumber>, where VlanID can be any integer from 1 through 4095, and Nic… |
| 1.3.6.1.4.1.388.6.2.13.1.9 | ColumnccEPPRemVlan | read-write | current | Remove one VLAN from this Etherport policy. Only the Vlan Id needs to be input for removal |
| 1.3.6.1.4.1.388.6.2.13.1.10 | ColumnccEPPDropVlan | read-write | current | Drop all the VLANs for this Etherpolicy. A 'true' does the job |
| 1.3.6.1.4.1.388.6.2.14 | Tableccdot11FHPhyTable | not-accessible | current | The table for FH specific configuration parameters |
| 1.3.6.1.4.1.388.6.2.14.1 | Rowccdot11FHPhyEntry | not-accessible | current | An entry in the FH Phy Table. |
| 1.3.6.1.4.1.388.6.2.14.1.1 | Columnccdot11FHIndex | not-accessible | current | The index of this FH radio. |
| 1.3.6.1.4.1.388.6.2.14.1.2 | Columnccdot11FHHopTime | read-only | current | The time in microseconds for the PMD to change from channel 2 to channel 80. |
| 1.3.6.1.4.1.388.6.2.14.1.3 | Columnccdot11FHCurrentChannelNumber | read-only | current | The current channel number of the frequency output by the RF synthesizer. |
| 1.3.6.1.4.1.388.6.2.14.1.4 | Columnccdot11FHMaxDwellTime | read-only | current | The maximum time in TU that the transmitter is permitted to operate on a single channel. |
| 1.3.6.1.4.1.388.6.2.14.1.5 | Columnccdot11FHCurrentDwellTime | read-write | current | The current time in TU that the transmitter shall operate on a single channel, as set by the MAC. The valid range is from 25 to 1000 milliseconds (both inclusi… |
| 1.3.6.1.4.1.388.6.2.14.1.6 | Columnccdot11FHCurrentSet | read-write | current | The current set of patterns the PHY LME is using to determine the hopping sequence. A value of 255 returned by the switch indicates that there is no value set … |
| 1.3.6.1.4.1.388.6.2.14.1.7 | Columnccdot11FHCurrentPattern | read-write | current | The current pattern the PHY LME is using to determine the hop sequence. A value of 255 returned by the switch indicates that there is no value set for this var… |
| 1.3.6.1.4.1.388.6.2.14.1.8 | Columnccdot11FHCurrentIndex | read-only | current | The current index value the PHY LME is using the determine the CurrentChannelNumber. |
| 1.3.6.1.4.1.388.6.2.16 | NodeccAPPolicyObjects | |||
| 1.3.6.1.4.1.388.6.2.16.2 | TableccAPPolicyAddRemWLANTable | not-accessible | current | A table for adding and removing WLANs |
| 1.3.6.1.4.1.388.6.2.16.2.1 | RowccAPPolicyAddRemWLANEntry | not-accessible | current | A table for adding and removing WLANs. Select/Unselect and WLAN for a mapping. The second index is the mapping. 1 as its value indicates addition/removal of a … |
| 1.3.6.1.4.1.388.6.2.16.2.1.1 | ColumnccAPPolicyDeviceType | not-accessible | current | The type of mapping to/from which WLANs will be selected/unselected. |
| 1.3.6.1.4.1.388.6.2.16.2.1.2 | ColumnccAPPolicyAddWLAN | read-only | deprecated | Add a WLAN to this particular APPolicy and device. The format for entering the input is <existing Wlan,bandwidth>, where the sum of all bandwidth for this AP p… |
| 1.3.6.1.4.1.388.6.2.16.2.1.3 | ColumnccAPPolicyRemWLAN | read-only | deprecated | Remove a WLAN from this particular APPolicy and device. Note:Default AP Policy cannot be edited |
| 1.3.6.1.4.1.388.6.2.16.2.1.4 | ColumnccAPPolicySelectWLAN | read-write | current | Select a WLAN for this mapping. The WLAN should already be added to this Access Port Policy for mapping. (4BSS-4ESS) :Four WLANs can be selected, if full unsel… |
| 1.3.6.1.4.1.388.6.2.16.2.1.5 | ColumnccAPPolicyUnselectWLAN | read-write | current | UnSelect a WLAN for this mapping. The WLAN should already have been selected for this mapping. WLAN can be unselected for (4BSS-4ESS) and (1BSS-1ESS) mapping o… |
| 1.3.6.1.4.1.388.6.2.16.3 | TableccAPPolicyWLANTable | not-accessible | current | A table for setting attributes of a wlan for a particular mapping for a Access Port Policy. |
| 1.3.6.1.4.1.388.6.2.16.3.1 | RowccAPPolicyWLANEntry | not-accessible | current | This table allows Get/Set attributes of a WLAN for a mapping for a particular AP policy. First index is a AP Policy, Second index is the Mapping 1 indicates ma… |
| 1.3.6.1.4.1.388.6.2.16.3.1.1 | ColumnccAPPolicyWLANIndex | not-accessible | current | The index of this particular WLAN. |
| 1.3.6.1.4.1.388.6.2.16.3.1.2 | ColumnccAPPolicyWLAN | read-only | current | Name of this particular WLAN which belongs to this APPolicy and this devicetype. |
| 1.3.6.1.4.1.388.6.2.16.3.1.3 | ColumnccAPPolicyWLANBW | read-write | current | The bandwidth allocated to this particular WLAN, which belongs to this APPolicy and this devicetype. Bandwidth of an FH port is 100% by default, and any attemp… |
| 1.3.6.1.4.1.388.6.2.16.3.1.4 | ColumnccAPPolicyWLANNP | read-write | current | The Network Policy which belongs to this particular WLAN, which belongs to this APPolicy. WLAN must already be configured for this AP Policy to set the Network… |
| 1.3.6.1.4.1.388.6.2.16.3.1.5 | ColumnccAPPolicyWLANBSS | read-write | current | The BSS of this particular WLAN, which belongs to this APPolicy and this devicetype. BSS ID for AP 100, FHSS, AP200a is set to 1 by default and cannot be modif… |
| 1.3.6.1.4.1.388.6.2.16.4 | TableccAPPolicyBSSTable | not-accessible | current | A table to GET/SET the primary wlan property of a particular bss and device type |
| 1.3.6.1.4.1.388.6.2.16.4.1 | RowccAPPolicyBSSEntry | not-accessible | current | This table will GET/SET the primary wlan property 'per APPolicy, per devicetype,per BSS. ccAPPolicyIndex and ccDeviceType are defined earlier. ccAPPolicyBSS is… |
| 1.3.6.1.4.1.388.6.2.16.4.1.1 | ColumnccAPPolicyBSS | not-accessible | current | The BSS for which the primary wlan property needs to be get/set |
| 1.3.6.1.4.1.388.6.2.16.4.1.2 | ColumnccAPPolicyPrimaryWLAN | read-write | current | The primary wlan property for this particular APPolicy, per device type and per BSS, the WLAN marked as primary should already be added as a wlan into this pol… |
| 1.3.6.1.4.1.388.6.2.17 | TableccFWLANTable | not-accessible | current | A list of LAN descriptors. Note:This Feature is VPN dependent feature hence if vpnsupport is not enabled then the walk over this table will not return anything… |
| 1.3.6.1.4.1.388.6.2.17.1 | RowccFWLANEntry | not-accessible | current | A LAN descriptor. |
| 1.3.6.1.4.1.388.6.2.17.1.1 | ColumnccLANIndex | read-only | current | The Index for the LAN descriptor. |
| 1.3.6.1.4.1.388.6.2.17.1.2 | ColumnccLANName | read-only | current | LAN name. |
| 1.3.6.1.4.1.388.6.2.17.1.3 | ColumnccLANDesc | read-write | current | LAN description. |
| 1.3.6.1.4.1.388.6.2.17.1.4 | ColumnccLANNATCount | read-only | current | The number of NAT entries attached to a LAN. |
| 1.3.6.1.4.1.388.6.2.17.1.5 | ColumnccLANAddNAT | read-write | current | Create a new NAT entry for this LAN. Syntax: <RemoteRealIP,LocalNatIP> OR <RemoteRealIP,LocalNatIP,NumberOfEntries> The agent will execute the appropriate code… |
| 1.3.6.1.4.1.388.6.2.17.1.6 | ColumnccLANRemNAT | read-write | current | Remove one NAT entry from this LAN. Syntax: <RemoteRealIP,LocalNatIP> OR <RemoteRealIP,LocalNatIP,NumberOfEntries> The agent will execute the appropriate code … |
| 1.3.6.1.4.1.388.6.2.17.1.7 | ColumnccLANEp | read-write | current | LAN Ethernet Port. Enter an ethernet port number. Valid port numbers are 1 and 2 (for the two physical ethernet ports) as well as 3 (for a virtual VPN port con… |
| 1.3.6.1.4.1.388.6.2.17.1.8 | ColumnccLANNp | read-write | current | Network policy associated with this LAN. Enter either the name of an existing network policy, or enter 'remove' to set the current value to blank. |
| 1.3.6.1.4.1.388.6.2.17.1.9 | ColumnccLANPfAllow | read-write | current | Port Filter for this LAN. Valid input values are https ,http ,ftp and telnet .The input values are case sensitive. Only one value can be set at a time. |
| 1.3.6.1.4.1.388.6.2.17.1.10 | ColumnccLANPfDeny | read-write | current | Port Filter for this LAN. Valid input values are https ,http ,ftp and telnet and web. Only one value can be given at a time. |
| 1.3.6.1.4.1.388.6.2.18 | TableccFWLANNATTable | not-accessible | current | A list of LAN NAT Entries. This is a dual-index table, NAT entries for all LANs are displayed. A single entry of 0.0.0.0 for a LAN means that LAN has no NAT en… |
| 1.3.6.1.4.1.388.6.2.18.1 | RowccFWLANNATEntry | not-accessible | current | A LAN descriptor. |
| 1.3.6.1.4.1.388.6.2.18.1.1 | ColumnccLANNATIndex | read-only | current | The Index for the NAT entry. |
| 1.3.6.1.4.1.388.6.2.18.1.2 | ColumnccLANNATRemoteRealIP | read-only | current | The Remote Real IP address in a NAT translation. |
| 1.3.6.1.4.1.388.6.2.18.1.3 | ColumnccLANNATLocalNatIP | read-only | current | The Local NAT IP address in a NAT translation. |
| 1.3.6.1.4.1.388.6.2.19 | TableccRouteTable | not-accessible | current | Display current network routing table. |
| 1.3.6.1.4.1.388.6.2.19.1 | RowccRouteEntry | not-accessible | current | A Route entry. |
| 1.3.6.1.4.1.388.6.2.19.1.1 | ColumnccRouteIndex | read-only | current | The Index for the Route entry. |
| 1.3.6.1.4.1.388.6.2.19.1.2 | ColumnccRouteDest | read-only | current | The Destination for the Route entry. |
| 1.3.6.1.4.1.388.6.2.19.1.3 | ColumnccRouteGateway | read-only | current | The Gateway for the Route entry. |
| 1.3.6.1.4.1.388.6.2.19.1.4 | ColumnccRouteFlags | read-only | current | The Flags for the Route entry. These are standard 'netstat' flags, including (but not limited to): C - Generate new routes on use G - Destination requires forw… |
| 1.3.6.1.4.1.388.6.2.19.1.5 | ColumnccRouteRefs | read-only | current | The number of references to the Route entry. |
| 1.3.6.1.4.1.388.6.2.19.1.6 | ColumnccRouteUse | read-only | current | The Use count for the Route entry. |
| 1.3.6.1.4.1.388.6.2.19.1.7 | ColumnccRouteInterface | read-only | current | The Interface for the Route entry. |
| 1.3.6.1.4.1.388.6.2.19.1.8 | ColumnccRouteGenMask | read-only | current | The netmask for the Route entry |
| 1.3.6.1.4.1.388.6.2.20 | ScalarccRouteAddObj | read-write | current | Add route to the network routing table. Syntax:host <host addr> <gateway> or net <network addr> <gateway> netmask <netmask> |
| 1.3.6.1.4.1.388.6.2.21 | ScalarccRouteRemObj | read-write | current | Remove route from the network routing table. Syntax:host <host addr> <gateway> or net <network addr> <gateway> netmask <netmask> |
| 1.3.6.1.4.1.388.6.2.22 | ScalarccRouteFlush | read-write | current | Remove all routes from the network routing table. when set to True |
| 1.3.6.1.4.1.388.6.2.23 | NodeccDhcpSrvNIC1 | |||
| 1.3.6.1.4.1.388.6.2.23.1 | ScalarccDhcp1Srv | read-write | current | Enable(1)/Disable(2) DHCP Server on Ethernet 1. Note:DHCP Server can be enabled only on single interface at a time Note:This Feature is VPN dependent feature h… |
| 1.3.6.1.4.1.388.6.2.23.2 | ScalarccDhcp1Subnet | read-only | current | The subnet on Ethernet port 1 that the DHCP Server serves IP address for. |
| 1.3.6.1.4.1.388.6.2.23.3 | ScalarccDhcp1Netmask | read-only | current | The netmask address for the Ethernet port 1 that the DHCP Server serves IP addresses for. |
| 1.3.6.1.4.1.388.6.2.23.4 | ScalarccDhcp1BcastIP | read-only | current | The broadcast IP address for the subnet the DHCP Server serves on Ethernet Port 1. |
| 1.3.6.1.4.1.388.6.2.23.5 | ScalarccDhcp1RouterIP | read-write | current | The default Router/Gateway IP address for the subnet the DHCP Server serves on Ethernet Port 1. To remove the router option set SNMP Set Value to 0.0.0.0 . |
| 1.3.6.1.4.1.388.6.2.23.6 | ScalarccDhcp1PriDNSIP | read-write | current | The Primary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 1. To remove domain-name-servers option, set SNMP Set Value to 0.0.0.0 . |
| 1.3.6.1.4.1.388.6.2.23.7 | ScalarccDhcp1SecDNSIP | read-write | current | The Secondary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 1. To remove Secondary DNS IP, set SNMP Set Value to 0.0.0.0 . |
| 1.3.6.1.4.1.388.6.2.23.8 | ScalarccDhcp1DomainName | read-write | current | The Domain Name for the subnet the DHCP Server serves on Ethernet Port 1. To remove domain-name option, set SNMP Set Value to 0. |
| 1.3.6.1.4.1.388.6.2.23.9 | ScalarccDhcp1DefLease | read-write | current | The Default lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 1. To set to default-lease-time option, set SNMP Set Value to 0… |
| 1.3.6.1.4.1.388.6.2.23.10 | ScalarccDhcp1MaxLease | read-write | current | The Maximum lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 1. To set to default max-lease-time option, set SNMP Set Value … |
| 1.3.6.1.4.1.388.6.2.23.11 | TableccDhcp1IPRangeTable | not-accessible | current | A table of DHCP IP Ranges for Ethernet 1. |
| 1.3.6.1.4.1.388.6.2.23.11.1 | RowccDhcp1IPRangeEntry | not-accessible | current | A DHCP IP Range entry. |
| 1.3.6.1.4.1.388.6.2.23.11.1.1 | ColumnccDhcp1RangeIndex | read-only | current | An integer index for ccDhcp1IPRangeTable. |
| 1.3.6.1.4.1.388.6.2.23.11.1.2 | ColumnccDhcp1RangeStartIP | read-only | current | The DHCP IP Range Start IP Address. |
| 1.3.6.1.4.1.388.6.2.23.11.1.3 | ColumnccDhcp1RangeEndIP | read-only | current | The DHCP IP Range End IP Address. |
| 1.3.6.1.4.1.388.6.2.23.12 | ScalarccDhcp1AddIPRangeObj | read-write | current | Add a DHCP dynamically assignable IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip]. |
| 1.3.6.1.4.1.388.6.2.23.13 | ScalarccDhcp1RemIPRangeObj | read-write | current | Remove a dynamically assignable DHCP IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip]. |
| 1.3.6.1.4.1.388.6.2.23.14 | TableccDhcp1StaticIPTable | not-accessible | current | A table of DHCP Static Entries for Ethernet 1. |
| 1.3.6.1.4.1.388.6.2.23.14.1 | RowccDhcp1StaticIPEntry | not-accessible | current | A DHCP Static IP entry. |
| 1.3.6.1.4.1.388.6.2.23.14.1.1 | ColumnccDhcp1StaticIPIndex | read-only | current | An integer index for ccDhcp2StaticIPTable. |
| 1.3.6.1.4.1.388.6.2.23.14.1.2 | ColumnccDhcp1StaticIP | read-only | current | The DHCP Static Entry IP Address. |
| 1.3.6.1.4.1.388.6.2.23.14.1.3 | ColumnccDhcp1StaticMac | read-only | current | The DHCP Static Entry MAC Address. |
| 1.3.6.1.4.1.388.6.2.23.14.1.4 | ColumnccDhcp1StaticHost | read-only | current | The DHCP Static Entry host name. |
| 1.3.6.1.4.1.388.6.2.23.15 | ScalarccDhcp1AddStaticIPObj | read-write | current | Add a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address, mac_address, host_name. |
| 1.3.6.1.4.1.388.6.2.23.16 | ScalarccDhcp1RemStaticIPObj | read-write | current | Remove a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address. |
| 1.3.6.1.4.1.388.6.2.23.17 | TableccDhcp1OptionTable | not-accessible | current | A table of DHCP Options for Ethernet 1. |
| 1.3.6.1.4.1.388.6.2.23.17.1 | RowccDhcp1OptionEntry | not-accessible | current | A DHCP Option entry. |
| 1.3.6.1.4.1.388.6.2.23.17.1.1 | ColumnccDhcp1OptionIndex | read-only | current | An integer index for ccDhcp1OptionTable. |
| 1.3.6.1.4.1.388.6.2.23.17.1.2 | ColumnccDhcp1OptionName | read-only | current | The DHCP Option name. |
| 1.3.6.1.4.1.388.6.2.23.17.1.3 | ColumnccDhcp1OptionCode | read-only | current | The DHCP Option Code. |
| 1.3.6.1.4.1.388.6.2.23.17.1.4 | ColumnccDhcp1OptionType | read-only | current | The DHCP Option type. |
| 1.3.6.1.4.1.388.6.2.23.17.1.5 | ColumnccDhcp1OptionValue | read-only | current | The DHCP option value. |
| 1.3.6.1.4.1.388.6.2.23.18 | ScalarccDhcp1AddOptionObj | read-write | current | Add a DHCP option. This is a write-only object. Data input syntax: option_name, option_code, value_type, value value_type = ip-address | text |
| 1.3.6.1.4.1.388.6.2.23.19 | ScalarccDhcp1RemOptionObj | read-write | current | Remove a DHCP option. This is a write-only object. Data input syntax: option_name. |
| 1.3.6.1.4.1.388.6.2.23.20 | TableccDhcp1LeasesTable | not-accessible | current | A table of DHCP Leases for Ethernet 1. |
| 1.3.6.1.4.1.388.6.2.23.20.1 | RowccDhcp1LeasesEntry | not-accessible | current | A DHCP lease entry. |
| 1.3.6.1.4.1.388.6.2.23.20.1.1 | ColumnccDhcp1LeaseIndex | read-only | current | An integer index for ccDhcpLeaseTable1. |
| 1.3.6.1.4.1.388.6.2.23.20.1.2 | ColumnccDhcp1LeaseIP | read-only | current | The DHCP lease IP address assigned to MU. |
| 1.3.6.1.4.1.388.6.2.23.20.1.3 | ColumnccDhcp1LeaseMac | read-only | current | The DHCP lease MAC address for MU. |
| 1.3.6.1.4.1.388.6.2.23.20.1.4 | ColumnccDhcp1LeaseStartTime | read-only | current | The DHCP lease start time. |
| 1.3.6.1.4.1.388.6.2.23.20.1.5 | ColumnccDhcp1LeaseEndTime | read-only | current | The DHCP lease expiration time. |
| 1.3.6.1.4.1.388.6.2.23.21 | ScalarccDhcp1RemLeaseObj | read-write | current | Remove a DHCP lease. This is a write-only object. Data input syntax: ip_address. |
| 1.3.6.1.4.1.388.6.2.23.22 | ScalarccDhcp1RemStaticHost | read-write | current | Remove a DHCP statically assigned Host name. Data input syntax: Host name. A get operation on ccDhcp1RemStaticHost displays all the available StaticHost's. |
| 1.3.6.1.4.1.388.6.2.24 | NodeccDhcpSrvNIC2 | |||
| 1.3.6.1.4.1.388.6.2.24.1 | ScalarccDhcp2Srv | read-write | current | Enable(1)/Disable(2) DHCP Server on Ethernet 2. Note:DHCP Server can be enabled only on single interface at a time. Note:This Feature is VPN dependent feature … |
| 1.3.6.1.4.1.388.6.2.24.2 | ScalarccDhcp2Subnet | read-only | current | The subnet on Ethernet port 2 that the DHCP Server serves IP address for. |
| 1.3.6.1.4.1.388.6.2.24.3 | ScalarccDhcp2Netmask | read-only | current | The netmask address for the Ethernet port 2 that the DHCP Server serves IP addresses for. |
| 1.3.6.1.4.1.388.6.2.24.4 | ScalarccDhcp2BcastIP | read-only | current | The broadcast IP address for the subnet the DHCP Server serves on Ethernet Port 2. |
| 1.3.6.1.4.1.388.6.2.24.5 | ScalarccDhcp2RouterIP | read-write | current | The default Router/Gateway IP address for the subnet the DHCP Server serves on Ethernet Port 2. To remove the router option set SNMP Set Value to 0.0.0.0 . |
| 1.3.6.1.4.1.388.6.2.24.6 | ScalarccDhcp2PriDNSIP | read-write | current | The Primary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 2. To remove domain-name-servers option, set SNMP Set Value to 0.0.0.0 . |
| 1.3.6.1.4.1.388.6.2.24.7 | ScalarccDhcp2SecDNSIP | read-write | current | The Secondary DNS IP address for the subnet the DHCP Server serves on Ethernet Port 2. To remove Secondary DNS IP, set SNMP Set Value to 0.0.0.0 . |
| 1.3.6.1.4.1.388.6.2.24.8 | ScalarccDhcp2DomainName | read-write | current | The Domain Name for the subnet the DHCP Server serves on Ethernet Port 2. To remove domain-name option, set SNMP Set Value to 0. |
| 1.3.6.1.4.1.388.6.2.24.9 | ScalarccDhcp2DefLease | read-write | current | The Default lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 2. To set to default-lease-time option, set SNMP Set Value to 0… |
| 1.3.6.1.4.1.388.6.2.24.10 | ScalarccDhcp2MaxLease | read-write | current | The Maximum lease time of the IP address for the subnet the DHCP Server serves on Ethernet Port 2. To set to max-lease-time option, set SNMP Set Value to 0 it … |
| 1.3.6.1.4.1.388.6.2.24.11 | TableccDhcp2IPRangeTable | not-accessible | current | A table of DHCP IP Ranges for Ethernet 2. |
| 1.3.6.1.4.1.388.6.2.24.11.1 | RowccDhcp2IPRangeEntry | not-accessible | current | A DHCP IP Range entry. |
| 1.3.6.1.4.1.388.6.2.24.11.1.1 | ColumnccDhcp2RangeIndex | read-only | current | An integer index for ccDhcp1IPRangeTable. |
| 1.3.6.1.4.1.388.6.2.24.11.1.2 | ColumnccDhcp2RangeStartIP | read-only | current | The DHCP IP Range Start IP Address. |
| 1.3.6.1.4.1.388.6.2.24.11.1.3 | ColumnccDhcp2RangeEndIP | read-only | current | The DHCP IP Range End IP Address. |
| 1.3.6.1.4.1.388.6.2.24.12 | ScalarccDhcp2AddIPRangeObj | read-write | current | Add a DHCP dynamically assignable IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip]. |
| 1.3.6.1.4.1.388.6.2.24.13 | ScalarccDhcp2RemIPRangeObj | read-write | current | Remove a dynamically assignable DHCP IP address range. This is a write-only object. Data input syntax: start_ip[, end_ip]. |
| 1.3.6.1.4.1.388.6.2.24.14 | TableccDhcp2StaticIPTable | not-accessible | current | A table of DHCP Static Entries for Ethernet 2. |
| 1.3.6.1.4.1.388.6.2.24.14.1 | RowccDhcp2StaticIPEntry | not-accessible | current | A DHCP Static IP entry. |
| 1.3.6.1.4.1.388.6.2.24.14.1.1 | ColumnccDhcp2StaticIPIndex | read-only | current | An integer index for ccDhcp2StaticIPTable. |
| 1.3.6.1.4.1.388.6.2.24.14.1.2 | ColumnccDhcp2StaticIP | read-write | current | The DHCP Static Entry IP Address. |
| 1.3.6.1.4.1.388.6.2.24.14.1.3 | ColumnccDhcp2StaticMac | read-only | current | The DHCP Static Entry MAC Address. |
| 1.3.6.1.4.1.388.6.2.24.14.1.4 | ColumnccDhcp2StaticHost | read-only | current | The DHCP Static Entry host name. |
| 1.3.6.1.4.1.388.6.2.24.15 | ScalarccDhcp2AddStaticIPObj | read-write | current | Add a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address, mac_address, host_name. |
| 1.3.6.1.4.1.388.6.2.24.16 | ScalarccDhcp2RemStaticIPObj | read-write | current | Remove a DHCP statically assigned IP address. This is a write-only object. Data input syntax: ip_address. |
| 1.3.6.1.4.1.388.6.2.24.17 | TableccDhcp2OptionTable | not-accessible | current | A table of DHCP Options for Ethernet 2. |
| 1.3.6.1.4.1.388.6.2.24.17.1 | RowccDhcp2OptionEntry | not-accessible | current | A DHCP Option entry. |
| 1.3.6.1.4.1.388.6.2.24.17.1.1 | ColumnccDhcp2OptionIndex | read-only | current | An integer index for ccDhcp2OptionTable. |
| 1.3.6.1.4.1.388.6.2.24.17.1.2 | ColumnccDhcp2OptionName | read-only | current | The DHCP Option name. |
| 1.3.6.1.4.1.388.6.2.24.17.1.3 | ColumnccDhcp2OptionCode | read-write | current | The DHCP Option Code. |
| 1.3.6.1.4.1.388.6.2.24.17.1.4 | ColumnccDhcp2OptionType | read-only | current | The DHCP Option type. |
| 1.3.6.1.4.1.388.6.2.24.17.1.5 | ColumnccDhcp2OptionValue | read-only | current | The DHCP option value. |
| 1.3.6.1.4.1.388.6.2.24.18 | ScalarccDhcp2AddOptionObj | read-write | current | Add a DHCP option. This is a write-only object. Data input syntax: option_name, option_code, value_type, value value_type = ip-address | text |
| 1.3.6.1.4.1.388.6.2.24.19 | ScalarccDhcp2RemOptionObj | read-write | current | Remove a DHCP option. This is a write-only object. Data input syntax: option_name. |
| 1.3.6.1.4.1.388.6.2.24.20 | TableccDhcp2LeasesTable | not-accessible | current | A table of DHCP Leases for Ethernet 2. |
| 1.3.6.1.4.1.388.6.2.24.20.1 | RowccDhcp2LeasesEntry | not-accessible | current | A DHCP lease entry. |
| 1.3.6.1.4.1.388.6.2.24.20.1.1 | ColumnccDhcp2LeaseIndex | read-write | current | An integer index for ccDhcp2LeaseTable. |
| 1.3.6.1.4.1.388.6.2.24.20.1.2 | ColumnccDhcp2LeaseIP | read-only | current | The DHCP lease IP address assigned to MU. |
| 1.3.6.1.4.1.388.6.2.24.20.1.3 | ColumnccDhcp2LeaseMac | read-only | current | The DHCP lease MAC address for MU. |
| 1.3.6.1.4.1.388.6.2.24.20.1.4 | ColumnccDhcp2LeaseStartTime | read-only | current | The DHCP lease start time. |
| 1.3.6.1.4.1.388.6.2.24.20.1.5 | ColumnccDhcp2LeaseEndTime | read-write | current | The DHCP lease expiration time. |
| 1.3.6.1.4.1.388.6.2.24.21 | ScalarccDhcp2RemLeaseObj | read-write | current | Remove a DHCP lease. This is a write-only object. Data input syntax: ip_address. |
| 1.3.6.1.4.1.388.6.2.24.22 | ScalarccDhcp2RemStaticHost | read-write | current | Remove a DHCP statically assigned Host name. Data input syntax: Host name. A get operation on ccDhcp2RemStaticHost displays all the available StaticHost's |
| 1.3.6.1.4.1.388.6.3 | NodesymbolCCMgmt | |||
| 1.3.6.1.4.1.388.6.3.1 | ScalarccWLANAddObj | read-write | current | Add one WLAN Object into the WLAN Table. The Maximum length of the WLAN Name can be 50 characters, Note that the following characters cannot be part of WLAN Na… |
| 1.3.6.1.4.1.388.6.3.2 | ScalarccWLANRemObj | read-write | current | Remove one WLAN Object from the WLAN Table.The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',… |
| 1.3.6.1.4.1.388.6.3.3 | ScalarccUserAddObj | read-write | current | Add a user to the User Table. The Maximum length of the User name can be 20 characters. Note that the following characters cannot be part of User Name field - … |
| 1.3.6.1.4.1.388.6.3.4 | ScalarccUserRemObj | read-write | current | Remove a user from the User Table. |
| 1.3.6.1.4.1.388.6.3.5 | ScalarccGraphAddObj | read-write | current | Add a Graph object to the Graph table. |
| 1.3.6.1.4.1.388.6.3.6 | ScalarccGraphRemObj | read-write | current | Remove a Graph object from the Graph table. |
| 1.3.6.1.4.1.388.6.3.11 | ScalarccSecAddObj | read-write | current | Add a security object into the table. |
| 1.3.6.1.4.1.388.6.3.12 | ScalarccSecRemObj | read-write | current | Remove a security object from the table. |
| 1.3.6.1.4.1.388.6.3.13 | ScalarccACLAddObj | read-write | current | Add an ACL object into the table. |
| 1.3.6.1.4.1.388.6.3.14 | ScalarccACLRemObj | read-write | current | Remove an ACL object from the table. |
| 1.3.6.1.4.1.388.6.3.21 | TableccUserTable | not-accessible | current | User information table entries. |
| 1.3.6.1.4.1.388.6.3.21.1 | RowccUserEntry | not-accessible | current | User Information entries. |
| 1.3.6.1.4.1.388.6.3.21.1.1 | ColumnccUserID | read-only | current | The user name. Cannot change the user id, but can achieve the same goal through removing and recreating a new user with a different name. |
| 1.3.6.1.4.1.388.6.3.21.1.2 | ColumnccUserFullName | read-write | current | The full name of the user. The Maximum length of the User name can be 20 characters. Note that the following characters cannot be part of User Name field - ',&… |
| 1.3.6.1.4.1.388.6.3.21.1.3 | ColumnccUserPwd | read-write | current | The user login password to access Wireless Switch services. The Maximum length of the Password is 20 characters. Note that the following characters cannot be p… |
| 1.3.6.1.4.1.388.6.3.21.1.4 | ColumnccUserAdminRight | read-write | deprecated | Setting this object to the value <true(1)> gives the user admin rights, <false(2)> takes away the admin rights from the user. |
| 1.3.6.1.4.1.388.6.3.21.1.5 | ColumnccUserProfileMgmtRight | read-write | current | Setting this object to the value <true(1)> gives the user Profile Management rights, <false(2)> takes away the Profile Management rights from the user. |
| 1.3.6.1.4.1.388.6.3.21.1.6 | ColumnccUserSysAdminRight | read-write | current | Setting this object to the value <true(1)> gives the user Sys-Admin rights, <false(2)> takes away the Sys-Admin rights from the user. |
| 1.3.6.1.4.1.388.6.3.21.1.7 | ColumnccUserSNMPAdminRight | read-write | current | Setting this object to the value <true(1)> gives the user SNMP- Admin rights, <false(2)> takes away the SNMP-Admin rights from the user. |
| 1.3.6.1.4.1.388.6.3.21.1.8 | ColumnccUserSecurityAdminRight | read-write | current | Setting this object to the value <true(1)> gives the user Security- Admin rights, <false(2)> takes away the Security-Admin rights from the user. |
| 1.3.6.1.4.1.388.6.3.21.1.10 | ColumnccUserIndex | not-accessible | current | The index of the user table. |
| 1.3.6.1.4.1.388.6.3.22 | TableccWLANTable | not-accessible | current | A list of WLAN Object entries. |
| 1.3.6.1.4.1.388.6.3.22.1 | RowccWLANEntry | not-accessible | current | A WLAN Object entry. |
| 1.3.6.1.4.1.388.6.3.22.1.1 | ColumnccWLANIndex | read-only | current | The index for this WLAN object. |
| 1.3.6.1.4.1.388.6.3.22.1.2 | ColumnccWLANName | read-write | current | The WLAN object name. The Maximum length of the WLAN Name can be 50 characters. Note that the following characters cannot be part of WLAN Name field - ',.,\,&,… |
| 1.3.6.1.4.1.388.6.3.22.1.3 | ColumnccESSID | read-write | current | The ESSID for the interface. |
| 1.3.6.1.4.1.388.6.3.22.1.4 | ColumnccSecurity | read-write | current | A security Policy to be used by this WLAN. If your Network Manager/MIB Browser displays an error message, it is likely that the security policy being added is … |
| 1.3.6.1.4.1.388.6.3.22.1.5 | ColumnccACLEnabled | read-write | current | Enable or Disable ACL feature. |
| 1.3.6.1.4.1.388.6.3.22.1.14 | ColumnccMaxMus | read-write | current | The maximum number of MUs supported by this WLAN. |
| 1.3.6.1.4.1.388.6.3.22.1.15 | ColumnccKerberosAuthName | read-write | current | The name used for authenticating to a Kerberos Server. |
| 1.3.6.1.4.1.388.6.3.22.1.16 | ColumnccKerberosAuthPass | read-write | current | The password for authenticating to a Kerberos Server. The minimum length of a password to 6 characters. |
| 1.3.6.1.4.1.388.6.3.22.1.17 | ColumnccWLANACL | read-write | current | The ACL used by this WLAN. For removing the ACL from this WLAN, just input an empty string. |
| 1.3.6.1.4.1.388.6.3.22.1.18 | ColumnccWLANIsAuthenticated | read-only | current | Tells whether the WLAN is authenticated or not. |
| 1.3.6.1.4.1.388.6.3.22.1.19 | ColumnccWLANMUTraffic | read-write | current | Changes the results of an MU to MU commmunication. 0 indicates that MU to MU traffic is allowed, 1 indicates that it is not allowed and 2 indicates that all MU… |
| 1.3.6.1.4.1.388.6.3.22.1.20 | ColumnccWLANSecuredBeacon | read-write | current | 'true' indicates that beacons need to be secured, while 'false' allows them to be unsecured. |
| 1.3.6.1.4.1.388.6.3.22.1.21 | ColumnccWLANCurrentMU | read-only | current | The current number of MUs on this WLAN |
| 1.3.6.1.4.1.388.6.3.22.1.22 | ColumnccWLANNetMask | read-write | current | The Network Mask for the subnet. |
| 1.3.6.1.4.1.388.6.3.22.1.23 | ColumnccWLANDefaultRoute | read-write | current | The IP Address of the default route. |
| 1.3.6.1.4.1.388.6.3.22.1.24 | ColumnccWLANBCMC11A | read-only | current | WLAN broadcast/multicast encryption type on 802.11a radios. |
| 1.3.6.1.4.1.388.6.3.22.1.25 | ColumnccWLANBCMC11B | read-only | current | WLAN broadcast/multicast encryption type on 802.11b radios. |
| 1.3.6.1.4.1.388.6.3.22.1.26 | ColumnccWLANBCMCFH | read-only | current | WLAN broadcast/multicast encryption type on FH radios. |
| 1.3.6.1.4.1.388.6.3.22.1.27 | ColumnccBroadcastEss | read-write | current | Enable (true)/Disable (false) Broadcast ESS feature for the WLAN. Broadcast ESS feature implies that a probe request containing a zero length SSID will be allo… |
| 1.3.6.1.4.1.388.6.3.22.1.28 | ColumnccWLANDesc | read-write | current | The description of the WLAN. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',… |
| 1.3.6.1.4.1.388.6.3.22.1.29 | ColumnccWlanWMEEnable | read-write | current | Description. Enable/Disable of WME for WLAN. |
| 1.3.6.1.4.1.388.6.3.22.1.30 | ColumnccWlanWMEProfile | read-write | current | Description. WME Profile for WLan |
| 1.3.6.1.4.1.388.6.3.23 | TableccKnownCCTable | not-accessible | current | A table of Known Wireless Switch entries |
| 1.3.6.1.4.1.388.6.3.23.1 | RowccKnownCCEntry | not-accessible | current | The entries of information about the known Wireless Switch. |
| 1.3.6.1.4.1.388.6.3.23.1.1 | ColumnccKnownCCIndex | read-only | current | An index of the table. |
| 1.3.6.1.4.1.388.6.3.23.1.2 | ColumnccKnownCCName | read-only | current | A known Wireless Switch name. |
| 1.3.6.1.4.1.388.6.3.23.1.3 | ColumnccKnownCCMac | read-only | current | A known Wireless Switch mac address. |
| 1.3.6.1.4.1.388.6.3.24 | TableccKnownAPTable | not-accessible | current | A table of Known Access-Point entries. |
| 1.3.6.1.4.1.388.6.3.24.1 | RowccKnownAPEntry | not-accessible | current | Entries of information about Known APs. |
| 1.3.6.1.4.1.388.6.3.24.1.1 | ColumnccKnownAPIndex | read-only | current | A index of the table. |
| 1.3.6.1.4.1.388.6.3.24.1.2 | ColumnccKnownAPMac | read-only | current | A known AP mac address. |
| 1.3.6.1.4.1.388.6.3.24.1.3 | ColumnccKnownAPVer | read-only | current | A known AP version. |
| 1.3.6.1.4.1.388.6.3.24.1.4 | ColumnccKnownAPIP | read-only | current | A known AP IP address. |
| 1.3.6.1.4.1.388.6.3.24.1.5 | ColumnccKnownAPPriority | read-only | current | Priority for the known AP. |
| 1.3.6.1.4.1.388.6.3.24.1.6 | ColumnccKnownAPMus | read-only | current | The number of MUs associated with the known AP. |
| 1.3.6.1.4.1.388.6.3.24.1.7 | ColumnccKnownAPType | read-only | current | The known AP type . |
| 1.3.6.1.4.1.388.6.3.24.1.8 | ColumnccKnownAPAPVer | read-only | current | The known AP version. |
| 1.3.6.1.4.1.388.6.3.24.1.9 | ColumnccKnownAPEssid | read-only | current | A known AP ESSID. |
| 1.3.6.1.4.1.388.6.3.25 | TableccGraphTable | not-accessible | current | A list of Graph entries. |
| 1.3.6.1.4.1.388.6.3.25.1 | RowccGraphEntry | not-accessible | current | Graph Object entries. |
| 1.3.6.1.4.1.388.6.3.25.1.1 | ColumnccGraphIndex | read-only | current | The index of the graph. |
| 1.3.6.1.4.1.388.6.3.25.1.2 | ColumnccGraphName | read-write | current | The name of the graph. |
| 1.3.6.1.4.1.388.6.3.25.1.7 | ColumnccGraphWlanId | read-write | current | A WLAN ID attached to this Graph. |
| 1.3.6.1.4.1.388.6.3.26 | TableccVLANTable | not-accessible | current | A list of VLAN Object entries. |
| 1.3.6.1.4.1.388.6.3.26.1 | RowccVLANEntry | not-accessible | current | A VLAN Object entry. |
| 1.3.6.1.4.1.388.6.3.26.1.1 | ColumnccVLANIndex | read-only | current | The index for this VLAN object. |
| 1.3.6.1.4.1.388.6.3.26.1.2 | ColumnccVLANName | read-only | current | The Name of the VLAN. |
| 1.3.6.1.4.1.388.6.3.26.1.3 | ColumnccVLANDesc | read-write | current | A description of the VLAN. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description ',# an… |
| 1.3.6.1.4.1.388.6.3.26.1.4 | ColumnccVLANVid | read-only | current | An id for this VLAN. |
| 1.3.6.1.4.1.388.6.3.26.1.5 | ColumnccVLANPriority | read-write | current | The priority for this VLAN. The valid values for priority for VLAN is between 0-7. |
| 1.3.6.1.4.1.388.6.3.26.1.6 | ColumnccVLANPorts | read-write | current | The ports for this VLAN. 1 means etherport1, 2 means etherport2 and 0 means both etherports. |
| 1.3.6.1.4.1.388.6.3.26.1.7 | ColumnccVLANEtherPolicy | read-only | current | The parent etherpolicy of this VLAN. |
| 1.3.6.1.4.1.388.6.3.26.1.8 | ColumnccVLANWlan | read-only | current | The number of WLANs attached to this VLAN object. |
| 1.3.6.1.4.1.388.6.3.26.1.9 | ColumnccVLANWlanList | read-only | current | A list of WLANs attatched to this VLAN. |
| 1.3.6.1.4.1.388.6.3.26.1.10 | ColumnccVLANAddWlan | read-write | current | Add a WLAN object into this VLAN. |
| 1.3.6.1.4.1.388.6.3.26.1.11 | ColumnccVLANRemWlan | read-write | current | Remove a VLAN object from the VLAN. |
| 1.3.6.1.4.1.388.6.3.28 | TableccSecurityTable | not-accessible | current | A table of Security entries. |
| 1.3.6.1.4.1.388.6.3.28.1 | RowccSecurityEntry | not-accessible | current | A Security Object entry. |
| 1.3.6.1.4.1.388.6.3.28.1.1 | ColumnccSecIndex | read-only | current | The index for this security object. |
| 1.3.6.1.4.1.388.6.3.28.1.2 | ColumnccSecName | read-write | current | The name of the security policy. The Maximum length of the Policy Name can be 50 characters. Note that the following characters cannot be part of Policy Name f… |
| 1.3.6.1.4.1.388.6.3.28.1.3 | ColumnccSecDesc | read-write | current | The description of this security policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of desc… |
| 1.3.6.1.4.1.388.6.3.28.1.4 | ColumnccSecBeaconEssid | read-write | deprecated | Enable/Disable the beacon Essid for this security policy. The default is TRUE. |
| 1.3.6.1.4.1.388.6.3.28.1.5 | ColumnccSecPreSharedAuthEnabled | read-write | current | Enable(true)/Disable(false) pre-shared WEP keys and/or WPA-PSK. Note that enabling this automatically disables Open Encryption |
| 1.3.6.1.4.1.388.6.3.28.1.6 | ColumnccSecWEPEnabled | read-write | current | Enable(true)/Disable(false) WEP. Note that enabling this automatically disables Open Encryption |
| 1.3.6.1.4.1.388.6.3.28.1.7 | ColumnccSecWEPKeyBitSize | read-write | current | WEP Key size in bits - 40 or 104. Note that if you are planning to use Kerberos as the authentication mechanism, you cannot choose the WEP key size as 40 bits,… |
| 1.3.6.1.4.1.388.6.3.28.1.8 | ColumnccSecWEPKey | read-write | current | This value is used to derive an encryption key which could be 40 bit or 128 bit in size. It will be needed if Shared Key is enabled and encryption type is WEP4… |
| 1.3.6.1.4.1.388.6.3.28.1.9 | ColumnccSecWEPKeyUse | read-write | current | Value of 0 to 3. ex. 0 1 2 3 |
| 1.3.6.1.4.1.388.6.3.28.1.10 | ColumnccSecKerberosEnabled | read-write | current | Enable(1)/Disable(2) Kerberos Authentication. Note that if you choose WEP as the encryption algorithm, you cannot choose the WEP key size to be 40 bits, since … |
| 1.3.6.1.4.1.388.6.3.28.1.11 | ColumnccSecKerberosRealm | read-write | current | A Kerberos Realm Name. Needed if Kerberos enabled. ex. APFW.SYMBOL.COM. Note that the following characters are not allowed for realm: ` @ # $ & ( ) = | \ ; dou… |
| 1.3.6.1.4.1.388.6.3.28.1.12 | ColumnccSecKerberosServer1 | read-write | current | 1st Kerberos server name or dotted-decimal IP address. |
| 1.3.6.1.4.1.388.6.3.28.1.13 | ColumnccSecKerberosServer2 | read-write | current | 2nd Kerberos server name or dotted-decimal IP address. |
| 1.3.6.1.4.1.388.6.3.28.1.14 | ColumnccSecKerberosServer3 | read-write | current | 3rd Kerberos server name or dotted-decimal IP address. |
| 1.3.6.1.4.1.388.6.3.28.1.15 | ColumnccSecKerberosPort1 | read-write | current | 1st Kerberos Server port number |
| 1.3.6.1.4.1.388.6.3.28.1.16 | ColumnccSecKerberosPort2 | read-write | current | 2nd Kerberos Server port number |
| 1.3.6.1.4.1.388.6.3.28.1.17 | ColumnccSecKerberosPort3 | read-write | current | 3rd Kerberos Server port number |
| 1.3.6.1.4.1.388.6.3.28.1.18 | ColumnccSecRadiusServer1 | read-write | current | 1st RADIUS Server Name/IP or dotted-decimal IP address. |
| 1.3.6.1.4.1.388.6.3.28.1.19 | ColumnccSecRadiusPort1 | read-write | current | 1st RADIUS Server port number |
| 1.3.6.1.4.1.388.6.3.28.1.20 | ColumnccSecRadiusSecret1 | read-write | current | 1st RADIUS server shared secret. |
| 1.3.6.1.4.1.388.6.3.28.1.21 | ColumnccSecRadiusServer2 | read-write | current | 2nd RADIUS Server Name/IP or dotted-decimal IP address. |
| 1.3.6.1.4.1.388.6.3.28.1.22 | ColumnccSecRadiusPort2 | read-write | current | 2nd RADIUS Server port number |
| 1.3.6.1.4.1.388.6.3.28.1.23 | ColumnccSecRadiusSecret2 | read-write | current | 2nd RADIUS server shared secret. |
| 1.3.6.1.4.1.388.6.3.28.1.24 | ColumnccSecRadiusHostname | read-write | current | Hostname to use with RADIUS server. |
| 1.3.6.1.4.1.388.6.3.28.1.25 | ColumnccSecEapEnabled | read-write | current | Enable(1)/Disable(2) EAP Authentication. Note that enabling this automatically disables Open Encryption |
| 1.3.6.1.4.1.388.6.3.28.1.26 | ColumnccSecEapQuietPeriod | read-write | current | EAP quiet period in seconds. Valid values lie between 1 and 99. |
| 1.3.6.1.4.1.388.6.3.28.1.27 | ColumnccSecEapTxPeriod | read-write | current | EAP transmit period in seconds. Valid values are from 1 to 99 seconds |
| 1.3.6.1.4.1.388.6.3.28.1.28 | ColumnccSecEapReauth | read-write | current | Enable(1)/Disable(2) forced EAP Re-Authentication. |
| 1.3.6.1.4.1.388.6.3.28.1.29 | ColumnccSecEapReauthPeriod | read-write | current | EAP Reauthentication period in seconds. Valid values are any value between 30 and 65535. |
| 1.3.6.1.4.1.388.6.3.28.1.30 | ColumnccSecEapReauthMaxRetries | read-write | current | Max retries for EAP re-authentication. Valid values are from 1 to 99. |
| 1.3.6.1.4.1.388.6.3.28.1.31 | ColumnccSecEapSupplTimeout | read-write | current | EAP supplicant timeout in seconds. Valid values are from 1 to 99 seconds. |
| 1.3.6.1.4.1.388.6.3.28.1.32 | ColumnccSecEapMaxreqRetries | read-write | current | Maximum retries for EAP requests. Valid values are from 1 to 10. |
| 1.3.6.1.4.1.388.6.3.28.1.33 | ColumnccSecGroupRekeyPeriod | read-write | current | Group key update period in seconds. Valid values are from 30 to 65535 seconds. |
| 1.3.6.1.4.1.388.6.3.28.1.34 | ColumnccSecPreSharedKeyMaterial | read-write | current | Preshared Key data, either 8-63 ASCII characters or 64 hex characters. |
| 1.3.6.1.4.1.388.6.3.28.1.35 | ColumnccSecOpenEncryptEnabled | read-write | current | Enable(true)/Disable(false) open encryption. Note that enabling open encryption also enables open authentication. |
| 1.3.6.1.4.1.388.6.3.28.1.36 | ColumnccSecKeyGuardEnabled | read-write | current | Enable(true)/Disable(false) KeyGuard encryption. Note that Keyguard doesn't work along with WEP encryption, if the WEP Key size is 40 bits. The WEP key size mu… |
| 1.3.6.1.4.1.388.6.3.28.1.37 | ColumnccSecTKIPEnabled | read-write | current | Enable(true)/Disable(false) TKIP encryption. Note that in the current implementation, TKIP cannot co-exist with Kerberos. Also note that TKIP cannot co-exist w… |
| 1.3.6.1.4.1.388.6.3.28.1.38 | ColumnccSecBCMCEncrType | read-only | deprecated | The encryption type of broadcast/multicast. |
| 1.3.6.1.4.1.388.6.3.28.1.39 | ColumnccSecCheckValidity | read-only | current | This OID can be used to find out whether this security policy is valid or not. If it is valid, an OK is returned in the response. If not, you get a description… |
| 1.3.6.1.4.1.388.6.3.28.1.40 | ColumnccSecCCMPEnabled | read-write | current | Enable(true)/Disable(false)AES CCMP encryption. This OID is read-only for Default security policy. For all other instances, it is read-write. |
| 1.3.6.1.4.1.388.6.3.28.1.41 | ColumnccSecPreAuthentication | read-write | current | Enable(true)/Disable(false)Pre-Authentication. This OID is read-only for 'Default' instance.(ie 'Default' Security policy) |
| 1.3.6.1.4.1.388.6.3.28.1.42 | ColumnccSecPMKCaching | read-write | current | Enable(true)/Disable(false)Opportunistic PMK Caching. This OID is read-only for 'Default' instance.(ie 'Default' security policy) |
| 1.3.6.1.4.1.388.6.3.28.1.43 | ColumnccSecVPNEnabled | read-write | current | Enable(true)/Disable(false) VPN Authentication. This OID is read-only for 'Default' instance. (ie 'Default' security policy).This OID can be enabled for only o… |
| 1.3.6.1.4.1.388.6.3.29 | TableccACLTable | not-accessible | current | A table for ACL entries. |
| 1.3.6.1.4.1.388.6.3.29.1 | RowccACLEntry | not-accessible | current | An ACL object entry. |
| 1.3.6.1.4.1.388.6.3.29.1.1 | ColumnccACLIndex | not-accessible | current | The index of this ACL object. |
| 1.3.6.1.4.1.388.6.3.29.1.2 | ColumnccACLName | read-write | current | The name of the ACL. The Maximum length of the ACL Name can be 50 characters. Note that the following characters cannot be part of ACL Name field - ',.,\,&,# a… |
| 1.3.6.1.4.1.388.6.3.29.1.3 | ColumnccACLDefaultAction | read-write | current | The default action for this ACL. Is either 'allow' or 'deny'. |
| 1.3.6.1.4.1.388.6.3.29.1.4 | ColumnccACLAction | read-write | current | SET only. Setting a new action for an already existing MAC address. Syntax is < allow/deny>,<new-MAC Address>,<old start MAC Address> or <allow/deny>,<new star… |
| 1.3.6.1.4.1.388.6.3.29.1.5 | ColumnccACLGetItemCount | read-only | current | The number of items in the ACL. |
| 1.3.6.1.4.1.388.6.3.29.1.6 | ColumnccACLGetItem | read-only | deprecated | Show the one item in the ACL list. Here's the format in which the reply is received: < MAC Addr,allow/deny >. |
| 1.3.6.1.4.1.388.6.3.29.1.7 | ColumnccACLAddItem | read-write | current | SET only. Adding a new rule into the list. Rules have to be added in the format <allow/deny,single MAC address> Or <allow/deny,Start MAC,End MAC>. The former i… |
| 1.3.6.1.4.1.388.6.3.29.1.8 | ColumnccACLRemItem | read-write | current | SET only. Removing a rule from the ACL. You need to give only the MAC address to remove the rule from the ACL. For rules which involve more than one MAC Addres… |
| 1.3.6.1.4.1.388.6.3.30 | NodeccNPolicyMgmt | |||
| 1.3.6.1.4.1.388.6.3.30.1 | ScalarccNumNPRec | read-only | current | The total number of NP records in the NP table. |
| 1.3.6.1.4.1.388.6.3.30.2 | ScalarccNumPORec | read-only | current | The total number of Policy Objects in the Policy table. |
| 1.3.6.1.4.1.388.6.3.30.3 | ScalarccNumCGRec | read-only | current | The total number of Classification Groups in the CG table. |
| 1.3.6.1.4.1.388.6.3.30.4 | ScalarccNumCFRec | read-only | current | The total number of Classifiers in the CF table. |
| 1.3.6.1.4.1.388.6.3.30.5 | ScalarccCFAddObj | read-write | current | Add one new Classifier object into the table. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string -… |
| 1.3.6.1.4.1.388.6.3.30.6 | ScalarccCFRemObj | read-write | current | Remove one Classifier object from the table. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - … |
| 1.3.6.1.4.1.388.6.3.30.7 | ScalarccCGAddObj | read-write | current | Add one Classification Group Object into the ccCGTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the inpu… |
| 1.3.6.1.4.1.388.6.3.30.8 | ScalarccCGRemObj | read-write | current | Remove one Classification Group Object from the ccCGTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the i… |
| 1.3.6.1.4.1.388.6.3.30.9 | ScalarccPOAddObj | read-write | current | Add one Policy Object into the ccPOTable. The 'type' of the Policy Object needs to be specified while adding. Here's the syntax: <PolicyObjectName, Type>. Type… |
| 1.3.6.1.4.1.388.6.3.30.10 | ScalarccPORemObj | read-write | current | Remove one Policy Object from the ccPOTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - … |
| 1.3.6.1.4.1.388.6.3.30.11 | ScalarccNPAddObj | read-write | current | Add one network policy object into the ccNPTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input stri… |
| 1.3.6.1.4.1.388.6.3.30.12 | ScalarccNPRemObj | read-write | current | Remove one network policy object from the ccNPTable. The maximum number of characters allowed is 50, and the following characters cannot be part of the input s… |
| 1.3.6.1.4.1.388.6.3.30.13 | TableccNPTable | not-accessible | current | A list of Network Policy entries. |
| 1.3.6.1.4.1.388.6.3.30.13.1 | RowccNPEntry | not-accessible | current | A Network policy table entry. |
| 1.3.6.1.4.1.388.6.3.30.13.1.1 | ColumnccNPIndex | read-only | current | A Network policy index. |
| 1.3.6.1.4.1.388.6.3.30.13.1.2 | ColumnccNPName | read-write | current | The network policy name. The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string- ',… |
| 1.3.6.1.4.1.388.6.3.30.13.1.3 | ColumnccNPDesc | read-write | current | The description of the network policy name. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of t… |
| 1.3.6.1.4.1.388.6.3.30.13.1.4 | ColumnccNPInName | read-write | current | The Input network policy name.The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input strin… |
| 1.3.6.1.4.1.388.6.3.30.13.1.5 | ColumnccNPOutName | read-write | current | The Output network policy name.The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input stri… |
| 1.3.6.1.4.1.388.6.3.30.14 | TableccPOTable | not-accessible | current | A list of Policy Object entries. |
| 1.3.6.1.4.1.388.6.3.30.14.1 | RowccPOEntry | not-accessible | current | A policy table entry. |
| 1.3.6.1.4.1.388.6.3.30.14.1.1 | ColumnccPOIndex | not-accessible | current | A Network policy index. |
| 1.3.6.1.4.1.388.6.3.30.14.1.2 | ColumnccPOName | read-write | current | The network policy name. The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string- ',… |
| 1.3.6.1.4.1.388.6.3.30.14.1.3 | ColumnccPODesc | read-write | current | A description of the network policy. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of the inpu… |
| 1.3.6.1.4.1.388.6.3.30.14.1.4 | ColumnccPOCgCount | read-only | current | The count of CGs in the Policy object. |
| 1.3.6.1.4.1.388.6.3.30.14.1.11 | ColumnccPOAddCg | read-write | current | Add a classification group to the policy. |
| 1.3.6.1.4.1.388.6.3.30.14.1.12 | ColumnccPORemCg | read-write | current | Remove a classification group from the policy. |
| 1.3.6.1.4.1.388.6.3.30.14.1.13 | ColumnccPOType | read-only | current | The type of the Policy Object. The returned value denotes one of the following: 1) 5 - Outbound AccessPort 2) 6 - Inbound AccessPort 3) 9 - Outbound NIC 4) 10 … |
| 1.3.6.1.4.1.388.6.3.30.14.1.14 | ColumnccPOPacketModifier | read-only | deprecated | Denotes which of 'TOS','Priority', and 'IP-Redirect' are being used for modifying the packets. |
| 1.3.6.1.4.1.388.6.3.30.15 | TableccCGTable | not-accessible | current | A table of Classification Group entries. |
| 1.3.6.1.4.1.388.6.3.30.15.1 | RowccCGEntry | not-accessible | current | A network classificaton group table entry. |
| 1.3.6.1.4.1.388.6.3.30.15.1.1 | ColumnccCGIndex | not-accessible | current | The index for the traffic classification group entry. |
| 1.3.6.1.4.1.388.6.3.30.15.1.2 | ColumnccCGName | read-write | current | A Classification Group name. The Maximum length of the input string can be 50 characters. Note that the following characters cannot be part of the input string… |
| 1.3.6.1.4.1.388.6.3.30.15.1.3 | ColumnccCGDesc | read-write | current | A description of the CG. The Maximum length of the description can be 128 characters. Note that the following characters cannot be part of description - ',# an… |
| 1.3.6.1.4.1.388.6.3.30.15.1.4 | ColumnccCGCfCount | read-only | current | The number of Classifier included in the Classification Group. |
| 1.3.6.1.4.1.388.6.3.30.15.1.7 | ColumnccCGAddCf | read-write | current | Add a new classifier to the classification group. |
| 1.3.6.1.4.1.388.6.3.30.15.1.8 | ColumnccCGRemCf | read-write | current | Remove a classifier from the classification group. |
| 1.3.6.1.4.1.388.6.3.30.16 | TableccCFTable | not-accessible | current | A table of Classifier entries. |
| 1.3.6.1.4.1.388.6.3.30.16.1 | RowccCFEntry | not-accessible | current | A network traffic classifier table entry. |
| 1.3.6.1.4.1.388.6.3.30.16.1.1 | ColumnccCFIndex | not-accessible | current | The index of Network Traffic classifier. |
| 1.3.6.1.4.1.388.6.3.30.16.1.2 | ColumnccCFName | read-write | current | The name of the classifier. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - ',.,\,&, # and do… |
| 1.3.6.1.4.1.388.6.3.30.16.1.3 | ColumnccCFDesc | read-write | current | The description of a classifier entry. The maximum number of characters allowed is 128, and the following characters cannot be part of the input string - ',# a… |
| 1.3.6.1.4.1.388.6.3.30.16.1.4 | ColumnccCFMcCount | read-only | current | The number of Matching Criterion for the classifier. |
| 1.3.6.1.4.1.388.6.3.30.16.1.10 | ColumnccCFAddMc | read-write | current | Add one Matching Criteria to the Classifier. Choose from the following list of offsets: srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4),… |
| 1.3.6.1.4.1.388.6.3.30.16.1.11 | ColumnccCFRemMc | read-write | current | Remove one Matching Criteria from the Classifier. Choose from the following list of offsets: srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriorit… |
| 1.3.6.1.4.1.388.6.3.30.17 | NodeccPOObjects | |||
| 1.3.6.1.4.1.388.6.3.30.17.2 | TableccPOCGTable | not-accessible | current | A list of per Policy Object, per Classificatin Group entries. |
| 1.3.6.1.4.1.388.6.3.30.17.2.1 | RowccPOCGEntry | not-accessible | current | An entry of Policy Objects, per Classification Group. |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.1 | ColumnccPOCGIndex | not-accessible | current | The index of this Classification Group, per Policy Object |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.2 | ColumnccPOCGName | read-only | current | The classification group name which belong to the policy object. |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.3 | ColumnccPOCGNewIP | read-write | current | The new IP address used by the CG in the Policy Object for IP-Redirect. Valid only for Input Policy Objects. For disabling the use of IP-Redirect,use the strin… |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.4 | ColumnccPOCGVlanPriority | read-write | current | The priority of the VLAN in the CG governed by the Policy Object. 0 to 7 only. Valid only for Input Policy Objects (Trying to SET for an Output Policy results … |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.5 | ColumnccPOCGTos | read-write | current | The Type of Service in the Policy Object. This is specific to the enterprise in which the Wireless Switch is deployed.The user has to input a bit pattern of si… |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.6 | ColumnccPOCGBw | read-write | current | The Bandwidth in the CG of the Policy Object. Valid only for Output Policy (Trying to SET for an Input Policy results in an error). A '-1' in the reply implies… |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.7 | ColumnccPOCGTxProfile | read-write | current | The TxProfile of the Policy Object. This controls how the AccessPort treats a packet. Valid only for an Output policy (Trying to SET for an Input Policy result… |
| 1.3.6.1.4.1.388.6.3.30.17.2.1.8 | ColumnccPOCGPacketModifier | read-only | current | Denotes which of 'TOS','Priority', and 'IP-Redirect' are being used for modifying the packets. |
| 1.3.6.1.4.1.388.6.3.30.18 | NodeccCGObjects | |||
| 1.3.6.1.4.1.388.6.3.30.18.2 | TableccCGCFTable | not-accessible | current | A table of Classier Entries, per Classification Group. |
| 1.3.6.1.4.1.388.6.3.30.18.2.1 | RowccCGCFEntry | not-accessible | current | A Classifier entry, per Classification Group |
| 1.3.6.1.4.1.388.6.3.30.18.2.1.1 | ColumnccCGCFIndex | not-accessible | current | The index of this classifier, per Classification Group |
| 1.3.6.1.4.1.388.6.3.30.18.2.1.2 | ColumnccCGCFAction | read-write | current | Indicates the allow/deny action for this Classifier belonging to this Classification Group. |
| 1.3.6.1.4.1.388.6.3.30.18.2.1.3 | ColumnccCGCFName | read-only | current | The name of the classifier in this CG. |
| 1.3.6.1.4.1.388.6.3.30.19 | NodeccCFObjects | |||
| 1.3.6.1.4.1.388.6.3.30.19.2 | TableccCFMcTable | not-accessible | current | A table of Matching Criteria per Classifier. |
| 1.3.6.1.4.1.388.6.3.30.19.2.1 | RowccCFMcEntry | not-accessible | current | A Matching Criteria table entry (per Classifier). |
| 1.3.6.1.4.1.388.6.3.30.19.2.1.1 | ColumnccCFMCIndex | not-accessible | current | The index of this Matching Criteria |
| 1.3.6.1.4.1.388.6.3.30.19.2.1.2 | ColumnccCFMCOffset | read-only | current | The offset of the Matching Criterion. The offsets are: srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7… |
| 1.3.6.1.4.1.388.6.3.30.19.2.1.3 | ColumnccCFMCValueCount | read-only | current | The number of values in this Matching Criterion. |
| 1.3.6.1.4.1.388.6.3.30.19.2.1.4 | ColumnccCFAddMCValue | read-write | current | Add one value to the Matching Criteria. For Source and Destination IP, Use syntax : <IPAddress:Net Mask>. <IPAddress-IPAddress>. <IPAddress>/<CIDR bits>. For P… |
| 1.3.6.1.4.1.388.6.3.30.19.2.1.5 | ColumnccCFRemMCValue | read-write | current | Remove one value from the Matching Criteria. The maximum number of characters allowed is 50, and the following characters cannot be part of the input string - … |
| 1.3.6.1.4.1.388.6.3.30.19.3 | TableccCFMcValTable | not-accessible | current | A table of the values per Matching Criterion. |
| 1.3.6.1.4.1.388.6.3.30.19.3.1 | RowccCFMcValEntry | not-accessible | current | An entry of Matching Criteria values (per Classifier, per Matching Criteria). |
| 1.3.6.1.4.1.388.6.3.30.19.3.1.1 | ColumnccCFMcValIndex | not-accessible | current | The index of this value in the Matching Criteria. |
| 1.3.6.1.4.1.388.6.3.30.19.3.1.2 | ColumnccCFMCValue | read-only | current | The value of the Matching Criterion. For Source and Destination IP, the returned value is of the format: <IPAddress:Net Mask> <IPAddress-IPAddress> <IPAddress>… |
| 1.3.6.1.4.1.388.6.3.31 | NodeccHSBConfigure | |||
| 1.3.6.1.4.1.388.6.3.31.1 | ScalarccHsbEnabled | read-write | current | Setting ccHsbEnabled to <true(1)> enables the Standby Management feature, Setting ccHsbEnabled to <false(2)> disables the Standby Management feature Mower: def… |
| 1.3.6.1.4.1.388.6.3.31.2 | ScalarccHsbMode | read-write | current | Standby Mode of the wireless switch, Primary or Standby |
| 1.3.6.1.4.1.388.6.3.31.3 | ScalarccHsbMacAddress1 | read-write | current | MAC address for establishing the heartbeat When the MAC address is set to 00:00:00:00:00:00 it sets the option to Auto discovery Enabled Note:Disable ccHsbEnab… |
| 1.3.6.1.4.1.388.6.3.31.4 | ScalarccHsbMacAddress2 | read-write | current | Second Mac address for establishing the heartbeat When the MAC address is set to 00:00:00:00:00:00 it sets the option to Auto discovery Enabled Note:Disable cc… |
| 1.3.6.1.4.1.388.6.3.31.5 | ScalarccHsbHeartbeatEnabledOnInterface1 | read-write | current | Setting to <true(1)> enables the heartbeat on interface 1, Setting to <false(2)> enables the heartbeat on interface 1 Mower: default value is TRUE. Note:Disabl… |
| 1.3.6.1.4.1.388.6.3.31.6 | ScalarccHsbHeartbeatEnabledOnInterface2 | read-write | current | Setting to <true(1)> enables the heartbeat on interface 2, Setting to <false(2)> enables the heartbeat on interface 2 Mower: default value is FALSE. Note:Disab… |
| 1.3.6.1.4.1.388.6.3.31.7 | ScalarccHsbConnectivityFlag | read-only | current | Tells the user if connectivity (heartbeat) between the Primary and Standby is established Mower: default value is FALSE. |
| 1.3.6.1.4.1.388.6.3.31.8 | ScalarccHsbFailoverState | read-only | current | This is the state of the Wireless switch. Here are the states 1: Startup 2: Find Standby 3: Waiting for Connectivity 4: Connected 5: Halted 6: Monitoring 7: Ac… |
| 1.3.6.1.4.1.388.6.3.31.9 | ScalarccHsbFailoverReason | read-only | current | This parameter tells the reason for failover. |
| 1.3.6.1.4.1.388.6.3.31.10 | ScalarccHsbResetCode | read-only | current | This is a number set by the Wireless switch when it reboots. |
| 1.3.6.1.4.1.388.6.3.31.11 | ScalarccHsbRevert | read-write | current | This is a Boolean variable. When the manager sets this variable to true the standby-active will revert to standby and disabled-primary will revert to primary. … |
| 1.3.6.1.4.1.388.6.3.31.12 | ScalarccHsbautorevert | read-write | current | State of the Auto Revert Function (Enabled/Disabled) Note:Disable ccHsbEnabled first to set this OID |
| 1.3.6.1.4.1.388.6.3.31.13 | ScalarccHsbautorevertdelay | read-write | current | Number of Minutes to delay after re-connecting before autoreverting Note:Disable ccHsbEnabled first to set this OID |
| 1.3.6.1.4.1.388.6.3.32 | TableccMUInfoTable | not-accessible | current | A table for MU Information entries. |
| 1.3.6.1.4.1.388.6.3.32.1 | RowccMUInfoEntry | not-accessible | current | An MU information object entry. |
| 1.3.6.1.4.1.388.6.3.32.1.1 | ColumnccMUInfoIndex | read-only | current | The index of MU Information Table. |
| 1.3.6.1.4.1.388.6.3.32.1.2 | ColumnccMUInfoType | read-only | current | Indicates the device type of this Mobile Unit. 0 = Data 1 = Voice 2 = Wireless AP. |
| 1.3.6.1.4.1.388.6.3.32.1.3 | ColumnccMUInfoMac | read-only | current | MAC address for this MU. |
| 1.3.6.1.4.1.388.6.3.32.1.4 | ColumnccMUInfoIP | read-only | current | IP address for this MU. |
| 1.3.6.1.4.1.388.6.3.32.1.5 | ColumnccMUInfoWlan | read-only | current | WLAN name that the MU is on currently. |
| 1.3.6.1.4.1.388.6.3.32.1.6 | ColumnccMUInfoEssid | read-only | current | ESSID currently selected by this MU. |
| 1.3.6.1.4.1.388.6.3.32.1.7 | ColumnccMUInfoAP | read-only | current | Displays the AP name this MU is associated with. |
| 1.3.6.1.4.1.388.6.3.32.1.8 | ColumnccMUInfoAPState | read-only | current | Indicates the association status of the AccessPort. Association Status: 0 = Away 1 = Associated |
| 1.3.6.1.4.1.388.6.3.32.1.9 | ColumnccMUInfoSecState | read-only | current | The security status for this MU. 0 = No Encryption 1 = WEP (per MU Key) 2 = WEP (Shared Key) 3 = TKIP (Per MU Key) 4 = TKIP (Shared Key) |
| 1.3.6.1.4.1.388.6.3.32.1.10 | ColumnccMUInfoCurRate | read-only | current | Indicates the current communication rate on the MU. 0 = 1 Mbps 1 = 2 Mbps 2 = 5.5 Mbps 3 = 6 Mbps 4 = 9 Mbps 5 = 11 Mbps 6 = 12 Mbps 7 = 18 Mbps 8 = 22 Mbps 9 … |
| 1.3.6.1.4.1.388.6.3.32.1.11 | ColumnccMUInfoSupRates | read-only | current | Indicates the current supported rates. This object meaning can be explained as the following: 1_Mbps(1) 2_Mbps(2) 1_2_Mbps(3) 5.5_Mbps(4) 1_5.5_Mbps(5) 2_5.5_M… |
| 1.3.6.1.4.1.388.6.3.32.1.12 | ColumnccMUInfoRssi | read-only | current | Receive signal strength indicator (RSSI) of this MU. |
| 1.3.6.1.4.1.388.6.3.32.1.13 | ColumnccMUInfoPsp | read-only | current | Indicates the current power mode setting on this MU. In PSP mode the radio receiver is configured to conserve battery life. 0 = Continuous Access Mode (CAM) mo… |
| 1.3.6.1.4.1.388.6.3.32.1.14 | ColumnccMUInfoIntf | read-only | current | The interface type displayed on the associated AP GUI. Like: 'RF'. |
| 1.3.6.1.4.1.388.6.3.32.1.15 | ColumnccMUInfoAsscUptime | read-only | current | The number of seconds since the MU last associated. Value is zero if the MU is not associated and was aged-out. |
| 1.3.6.1.4.1.388.6.3.32.1.16 | ColumnccMUInfoTktExp | read-only | current | The number of seconds before the security ticket expiration. |
| 1.3.6.1.4.1.388.6.3.32.1.17 | ColumnccMUInfoUserName | read-only | current | User name this MU may have for loging processing, if available. |
| 1.3.6.1.4.1.388.6.3.32.1.18 | ColumnccMUInfoPktTx | read-only | current | This is sum of all good packets sent from different transmit speed. |
| 1.3.6.1.4.1.388.6.3.32.1.19 | ColumnccMUInfoPktRx | read-only | current | This is sum of all good packets received from different transmit speed. |
| 1.3.6.1.4.1.388.6.3.32.1.20 | ColumnccMUInfoBytesTx | read-only | current | Number of bytes sent out. |
| 1.3.6.1.4.1.388.6.3.32.1.21 | ColumnccMUInfoBytesRx | read-only | current | Number of bytes received. |
| 1.3.6.1.4.1.388.6.3.32.1.22 | ColumnccMUInfoLastAct | read-only | current | Number of seconds since the last MU activity. |
| 1.3.6.1.4.1.388.6.3.32.1.23 | ColumnccMUInfoVlan | read-only | current | Value of 0, if not in used. Otherwise it's the VLAN ID. |
| 1.3.6.1.4.1.388.6.3.32.1.24 | ColumnccMUInfoAuthState | read-only | current | Informs whether the MU is authenticated or not |
| 1.3.6.1.4.1.388.6.3.32.1.25 | ColumnccMUInfoAuthMethod | read-only | current | The authentication method being used by the MU. |
| 1.3.6.1.4.1.388.6.3.32.1.26 | ColumnccMUInfoEncrMethod | read-only | current | The Unicast encryption type being used by the MU. |
| 1.3.6.1.4.1.388.6.3.32.1.27 | ColumnccMUInfoBCMCEncrType | read-only | current | The BroadCast encryption type being used by the MU. |
| 1.3.6.1.4.1.388.6.3.32.1.28 | ColumnccMUInfoRoamCount | read-only | current | Description. |
| 1.3.6.1.4.1.388.6.3.33 | NodeccACLObjects | |||
| 1.3.6.1.4.1.388.6.3.33.2 | TableccACLItemsTable | not-accessible | current | A table for individual entries per ACL |
| 1.3.6.1.4.1.388.6.3.33.2.1 | RowccACLItemsEntry | not-accessible | current | An ACL Item object entry. The instances in this table are the individual ACL entries within each ACL object |
| 1.3.6.1.4.1.388.6.3.33.2.1.1 | ColumnccACLItemIndex | not-accessible | current | The index of this specific entry per ACL |
| 1.3.6.1.4.1.388.6.3.33.2.1.2 | ColumnccACLItem | read-only | current | The individual ACL entry. The format of the string returned is <MAC Addr,allow/deny> |
| 1.3.6.1.4.1.388.6.3.34 | NodeccWVPNConfigure | |||
| 1.3.6.1.4.1.388.6.3.34.1 | NodewvpnGeneralSettings | |||
| 1.3.6.1.4.1.388.6.3.34.1.1 | ScalarwvpnServerEnable | read-write | current | This is a Boolean variable. If set to true, the WVPN server will be enabled. This is a WRITE-ONLY value. To enable the WVPN server, use a MIB instance of 0 and… |
| 1.3.6.1.4.1.388.6.3.34.1.2 | ScalarwvpnServerDisable | read-write | current | This is a Boolean variable. If set to true, the WVPN server will be disabled. This is a WRITE-ONLY value. To disable the WVPN server, use a MIB instance of 0 a… |
| 1.3.6.1.4.1.388.6.3.34.1.3 | ScalarwvpnServerRestart | read-write | current | This is a Boolean variable. If set to true, the WVPN server will be re-started. Setting to true is the only option allowed. This is a WRITE-ONLY value. To rest… |
| 1.3.6.1.4.1.388.6.3.34.1.4 | ScalarwvpnIpAddress | read-only | current | The IP address of the WVPN server. |
| 1.3.6.1.4.1.388.6.3.34.1.5 | ScalarwvpnPort | read-write | current | The port number of the WVPN server. Default value is 9102. |
| 1.3.6.1.4.1.388.6.3.34.1.6 | ScalarwvpnUnusedTimeout | read-write | current | The timeout value (seconds) for any idle WVPN session. |
| 1.3.6.1.4.1.388.6.3.34.1.7 | ScalarwvpnStatus | read-only | current | The current status of the WVPN server. |
| 1.3.6.1.4.1.388.6.3.34.1.8 | ScalardosEnable | read-write | current | This is a Boolean variable to allow use of tiny reliable UDP. |
| 1.3.6.1.4.1.388.6.3.34.1.9 | ScalardosPort | read-write | current | The reliable UDP port number. Default value is 9103. |
| 1.3.6.1.4.1.388.6.3.34.1.10 | ScalarclientKeepAlive | read-write | current | This parameter controls the keep alive functionality that sends echo requests each period when no data has passed through the session. If the WVPN server does … |
| 1.3.6.1.4.1.388.6.3.34.1.11 | ScalarvpnLicenseMax | read-only | current | The maximum number of VPN sessions allowed with the current licensing. |
| 1.3.6.1.4.1.388.6.3.34.1.12 | ScalarvpnLicenseInUse | read-only | current | The current number of VPN sessions actually in use. |
| 1.3.6.1.4.1.388.6.3.34.2 | NodewvpnWtlsSettings | |||
| 1.3.6.1.4.1.388.6.3.34.2.1 | ScalarmaxClientRsaKeySize | read-write | current | The maximum number of bits that the client certificate's public key is allowed to be. If the server receives a client certificate and this condition is not tru… |
| 1.3.6.1.4.1.388.6.3.34.2.2 | ScalarminClientRsaKeySize | read-write | current | The minimum number of bits that the client certificate's public key is allowed to be. If the server receives a client certificate and this condition is not tru… |
| 1.3.6.1.4.1.388.6.3.34.2.3 | ScalarmaxRsaKeySize | read-write | current | The maximum number of bits that the server certificate's key is allowed to be. If a server certificate is used that does not fulfill this condition, the server… |
| 1.3.6.1.4.1.388.6.3.34.2.4 | ScalarminRsaKeySize | read-write | current | The minimum number of bits that the server certificate's key is allowed to be. If a server certificate is used that does not fulfill this condition, the server… |
| 1.3.6.1.4.1.388.6.3.34.2.5 | Scalarcipher | read-write | current | A cipher for encrypting messages sent over the VPN channel. Can be one of the following values: AES256, AES192, AES128, 3DES, DES56. Default value is AES128. |
| 1.3.6.1.4.1.388.6.3.34.2.6 | Scalarmac | read-write | current | A Message Authentication Code (MAC) algorithm for verifying integrity of the messages sent over the VPN. Can be one of the following values: MD5_128, MD5_80, M… |
| 1.3.6.1.4.1.388.6.3.34.2.7 | ScalarrequireClientCertificate | read-write | current | This is a Boolean variable. WVPN server will request client to present a certificate if the value is set to true. |
| 1.3.6.1.4.1.388.6.3.34.2.8 | ScalarkeyRefresh | read-write | current | WTLS key refresh rate. The parties will refresh the session key after each 2^N (2 to the Nth power) exchanged packets, where N is the key refresh rate value. I… |
| 1.3.6.1.4.1.388.6.3.34.2.9 | ScalarwantedFipsMode | read-only | current | If set to true, only FIPS 140-2 compliant cryptographic algorithms are used to establish a VPN session. |
| 1.3.6.1.4.1.388.6.3.34.2.10 | ScalarsecurityMode | read-write | current | The current securityMode. Value can be customSecurity or defaultSecurity. Default security mode is defaultSecurity. |
| 1.3.6.1.4.1.388.6.3.34.2.11 | ScalarserverNumber | read-write | current | A server number must be between 1 and 15. This number is only relevant if there is a cluster of servers. |
| 1.3.6.1.4.1.388.6.3.34.2.12 | ScalarhandshakeTimeout | read-write | current | The number of seconds that the WVPN server allows a client to perform the whole WTLS handshake. If it times out, the client socket will be closed. Default valu… |
| 1.3.6.1.4.1.388.6.3.34.2.13 | ScalarallowSessionResume | read-write | current | This is a Boolean variable. If set to true, the WVPN server allows a client to do a session resume (i.e., a secure abbreviated handshake). If set to false, the… |
| 1.3.6.1.4.1.388.6.3.34.3 | NodewvpnAuthServerSettings | |||
| 1.3.6.1.4.1.388.6.3.34.3.1 | ScalaruseSimpleAuthentication | read-write | current | Specify whether Simple Authentication is used or not. Value could be true(1) or false(2). |
| 1.3.6.1.4.1.388.6.3.34.3.2 | ScalaruseRadiusAuthentication | read-write | current | This is a Boolean variable. If set to true, RADIUS Authentication will be enabled. |
| 1.3.6.1.4.1.388.6.3.34.3.3 | ScalaruseLdapAuthentication | read-only | current | This is a Boolean variable. If set to true, LDAP Authentication will be enabled. This feature is not implemented. |
| 1.3.6.1.4.1.388.6.3.34.3.4 | ScalaruseLocalDatabaseAuthentication | read-only | current | This is a Boolean variable. If set to true, Local Database Authentication will be enabled. This feature is not implemented. |
| 1.3.6.1.4.1.388.6.3.34.3.5 | NodesimpleAuthentication | |||
| 1.3.6.1.4.1.388.6.3.34.3.5.1 | ScalarsimpleAuthUserName | read-write | current | The Simple Authentication user name. |
| 1.3.6.1.4.1.388.6.3.34.3.5.2 | ScalarsimpleAuthPassword | read-write | current | The Simple Authentication user password. |
| 1.3.6.1.4.1.388.6.3.34.3.5.3 | ScalarsimpleAuthDomain | read-write | current | The Simple Authentication domain. |
| 1.3.6.1.4.1.388.6.3.34.3.6 | NodewvpnRadiusAuthentication | |||
| 1.3.6.1.4.1.388.6.3.34.3.6.1 | NoderadiusAuthPrimaryServer | |||
| 1.3.6.1.4.1.388.6.3.34.3.6.1.1 | ScalarradiusAuthPrimaryHost | read-write | current | The host name or IP address of the primary RADIUS server. |
| 1.3.6.1.4.1.388.6.3.34.3.6.1.2 | ScalarradiusAuthPrimaryPort | read-write | current | The UDP port the client is using to send requests to the primary RADIUS server. |
| 1.3.6.1.4.1.388.6.3.34.3.6.1.3 | ScalarradiusAuthPrimaryMaxRetries | read-write | current | The maximum number of times a client is allowed to try authenticating with the primary RADIUS server. Valid input values are from 1 to 10. |
| 1.3.6.1.4.1.388.6.3.34.3.6.1.4 | ScalarradiusAuthPrimaryTimeOut | read-write | current | The number of seconds in between retries to the primary RADIUS server. Valid input values are from 5 to 20. |
| 1.3.6.1.4.1.388.6.3.34.3.6.1.5 | ScalarradiusAuthPrimaryUserPassword | read-write | current | Some RADIUS servers require a user password to be set even though no password is required. If set, the WVPN server will send this password to the RADIUS server. |
| 1.3.6.1.4.1.388.6.3.34.3.6.1.6 | ScalarradiusAuthPrimarySecret | read-write | current | The value used to encrypt RADIUS traffic to and from the RADIUS server. A secret shared between the RADIUS server and the WVPN server. |
| 1.3.6.1.4.1.388.6.3.34.3.6.2 | NoderadiusAuthSecondaryServer | |||
| 1.3.6.1.4.1.388.6.3.34.3.6.2.1 | ScalarradiusAuthSecondaryHost | read-write | current | The host name or IP address of the secondary RADIUS server. |
| 1.3.6.1.4.1.388.6.3.34.3.6.2.2 | ScalarradiusAuthSecondaryPort | read-write | current | The UDP port the client is using to send requests to the secondary RADIUS server. |
| 1.3.6.1.4.1.388.6.3.34.3.6.2.3 | ScalarradiusAuthSecondaryMaxRetries | read-write | current | The maximum number of times a client is allowed to try authenticating with the secondary RADIUS server. Valid input values are from 1 to 10. |
| 1.3.6.1.4.1.388.6.3.34.3.6.2.4 | ScalarradiusAuthSecondaryTimeOut | read-write | current | The number of seconds in between retries to the secondary RADIUS server. Valid input values are from 5 to 20 |
| 1.3.6.1.4.1.388.6.3.34.3.6.2.5 | ScalarradiusAuthSecondaryUserPassword | read-write | current | Some RADIUS servers require a user password to be set even though no password is required. If set, the WVPN server will send this password to the RADIUS server. |
| 1.3.6.1.4.1.388.6.3.34.3.6.2.6 | ScalarradiusAuthSecondarySecret | read-write | current | The value used to encrypt RADIUS traffic to and from the RADIUS server. A secret shared between the RADIUS server and the WVPN server. |
| 1.3.6.1.4.1.388.6.3.34.4 | NodewvpnIpPoolsSettings | |||
| 1.3.6.1.4.1.388.6.3.34.4.1 | ScalarwvpnAddIpPoolObj | read-write | current | Add an IP Pool object to the wvpnIpPoolsTable. Input string format: <pool_name,begin_ip,end_ip>. Max length of pool_name is 32 bytes, and begin_ip and end_ip a… |
| 1.3.6.1.4.1.388.6.3.34.4.2 | ScalarwvpnRemIpPoolObj | read-write | current | Remove an IP Pool object from wvpnIpPoolsTable. Input string format: <pool_name>. Max length of pool_name is 32 bytes. Characters not allowed in the IPpool_nam… |
| 1.3.6.1.4.1.388.6.3.34.4.3 | ScalarwvpnAddIpPoolRange | read-write | current | Add an IP address range to an IP Pool object in the wvpnIpPoolsTable. Input string format: <pool_name,begin_ip,end_ip>. Max length of pool_name is 32 bytes, an… |
| 1.3.6.1.4.1.388.6.3.34.4.4 | ScalarwvpnRemIpPoolRange | read-write | current | Remove an IP address range from an IP Pool object in the wvpnIpPoolsTable. Input string format: <pool_name,begin_ip,end_ip>. Max length of pool_name is 32 byte… |
| 1.3.6.1.4.1.388.6.3.34.4.5 | ScalaruseDhcpGateway | read-write | current | This is a Boolean variable. If set to true, DHCP is enabled. |
| 1.3.6.1.4.1.388.6.3.34.4.6 | TablewvpnIpPoolsTable | not-accessible | current | The IP Pools Table |
| 1.3.6.1.4.1.388.6.3.34.4.6.1 | RowwvpnIpPoolsEntry | not-accessible | current | An IP Pool object. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.1 | ColumnwvpnIpPoolIndex | read-only | current | An integer index for the wvpnIpPoolsTable to access an IP Pool object. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.2 | ColumnclientIpPoolName | read-write | current | This is the client's IP Pool name. Max length of pool name is 32 bytes. Characters not allowed in the pool name: ` @ # $ & ( ) | = \ ; double-quote ' < > / sp |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.3 | ColumnclientNetMask | read-write | current | clientNetMask |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.4 | ColumnclientDhcpServerAddress | read-write | current | This is the client's DHCP server IP address. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.5 | ColumnclientDefaultGatewayAddress | read-write | current | This is the client's default gateway address. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.6 | ColumnclientDnsAddress | read-write | current | This is the client's DNS server IP address. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.7 | ColumnclientWinsAddress | read-write | current | This is the client's WINS address. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.8 | ColumnclientDomainName | read-write | current | This is the client's domain name. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.9 | ColumnclientNetBiosNodeType | read-write | current | This is the client's Net Bios Node type. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.10 | ColumnclientDhcpLeaseTime | read-only | current | This is currently not supported in this version. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.11 | ColumnreuseAddrTime | read-write | current | When client's IP returns to DHCP IP pool, this is the amount of time required before IP can be reused. Input required in seconds. Output also is in seconds. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.12 | ColumnipRangeCount | read-only | current | The total number of IP address ranges that exist for a particular IP pool object. |
| 1.3.6.1.4.1.388.6.3.34.4.6.1.13 | ColumnclientIpRanges | read-only | current | List of client's IP address ranges. Ranges are separated by a comma, and the start and end of each range is separated by a hyphen. |
| 1.3.6.1.4.1.388.6.3.34.4.7 | ScalarwvpnIpPoolsCount | read-only | current | Total size of the IP Pool object list. |
| 1.3.6.1.4.1.388.6.3.34.4.8 | ScalarwvpnIpPoolsNames | read-only | current | Comma-separated list of client IP Pool names. |
| 1.3.6.1.4.1.388.6.3.34.5 | NodewvpnCertificateSettings | |||
| 1.3.6.1.4.1.388.6.3.34.5.1 | TablewvpnServerCertificateTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1 | RowwvpnServerCertificateEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.1 | ColumnwvpnCertIndex | read-only | current | An integer index for wvpnServerCertificateTable to access a certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.2 | ColumnuserName | read-only | current | The name that identifies the certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.3 | ColumnserialNumber | read-write | current | The serial number of the certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.4 | Columnsubject | read-only | current | The subject of the certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.5 | Columnversion | read-write | current | The version of the certificate format. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.6 | Columnissuer | read-only | current | The issuer of the certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.7 | ColumnkeyLength | read-only | current | The key length of the certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.8 | ColumnvalidFrom | read-only | current | The start validity date of the certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.9 | ColumnvalidTo | read-only | current | The expiry date of the certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.10 | Columncertificate | read-only | current | Server certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.11 | Columnbinary | read-only | current | The certificate in hex binary notation. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.12 | ColumnfingerPrint | read-only | current | A hash over the entire certificate that is statistically unique. The hash algorithm is SHA-1, and the binary hash is converted to hex encoded representation. |
| 1.3.6.1.4.1.388.6.3.34.5.1.1.13 | ColumnauthFingerPrint | read-only | current | This is not supported in the current version. |
| 1.3.6.1.4.1.388.6.3.34.5.2 | ScalarserverCertCount | read-only | current | The total number of end users in the wvpnServerCertificateTable. The value is either 0 or 1. |
| 1.3.6.1.4.1.388.6.3.34.5.3 | ScalarserverCertUserNames | read-only | current | A list of certificate user names. |
| 1.3.6.1.4.1.388.6.3.34.5.4 | TablewvpnCaCertificateTable | not-accessible | current | A table of WVPN CA certificates. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1 | RowwvpnCaCertificateEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.1 | ColumnwvpnCaCertIndex | read-write | current | An integer index for wvpnCaCertificateTable to access a CA certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.2 | ColumnwvpnCaSerialNumber | read-only | current | The serial number of the CA certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.3 | ColumnwvpnCaSubject | read-only | current | The subject of the CA certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.4 | ColumnwvpnCaVersion | read-only | current | The version of the CA certificate format. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.5 | ColumnwvpnCaIssuer | read-only | current | The issuer of the CA certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.6 | ColumnwvpnCaKeyLength | read-only | current | The key length of the CA certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.7 | ColumnwvpnCaValidFrom | read-only | current | The start validity date of the CA certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.8 | ColumnwvpnCaValidTo | read-only | current | The expiry date of the CA certificate. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.9 | ColumnwvpnCaBinary | read-only | current | The CA certificate in Hex binary notation. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.10 | ColumnwvpnCaFingerPrint | read-only | current | A hash over the entire certificate that is statistically unique. The hash algorithm is SHA-1, and the binary hash is converted to hex encoded representation. |
| 1.3.6.1.4.1.388.6.3.34.5.4.1.11 | ColumnwvpnCaAuthFingerPrint | read-only | current | This is not supported in the current version. |
| 1.3.6.1.4.1.388.6.3.34.5.5 | ScalarcaCertCount | read-only | current | The total number of certificate serial numbers in the wvpnCaCertificateTable. |
| 1.3.6.1.4.1.388.6.3.34.5.6 | ScalarcertSerialNumbers | read-only | current | A list of certificate serial numbers. Serial numbers are comma delimited. |
| 1.3.6.1.4.1.388.6.3.34.5.7 | ScalarimportServerCert | read-write | current | Import a server certificate that is already residing on the local machine. Input String format: <serverCertFile,password,certFileName> serverCertFile must be a… |
| 1.3.6.1.4.1.388.6.3.34.5.8 | ScalarremoveServerCert | read-write | current | Remove a server certificate from the wvpnServerCertificateTable. Input string format: <UserName> Characters not allowed in UserName: ` @ # $ & | = ; double-quo… |
| 1.3.6.1.4.1.388.6.3.34.5.9 | ScalarimportCaCert | read-write | current | Import a CA certificate that is already residing on the local machine. Input String format: <caCertFile> caCertFile must be an absolute path to the file. Chara… |
| 1.3.6.1.4.1.388.6.3.34.5.10 | ScalarremoveCaCert | read-write | current | Remove a CA certificate at a given index from the wvpnCaCertificateTable. This is a WRITE-ONLY value. |
| 1.3.6.1.4.1.388.6.3.34.5.11 | ScalarimportTftpServerCert | read-write | current | Import a server certificate from a remote machine via TFTP. Input String format: <hostIPaddr,serverCertFile,password,certFileName> certFileName is optional, bu… |
| 1.3.6.1.4.1.388.6.3.34.5.12 | ScalarimportTftpCaCert | read-write | current | Import a CA certificate from a remote machine via TFTP. Input String format: <hostIPaddr,caCertFile> caCertFile must be an absolute path to the file. Character… |
| 1.3.6.1.4.1.388.6.3.34.5.13 | ScalardirCert | read-only | current | Dumps a list of certificate files. This diagnostic tool lists the certificate files left over from upload operations - it does not display or affect certificat… |
| 1.3.6.1.4.1.388.6.3.34.5.14 | ScalardumpCert | read-write | current | Dumps the contents of a certificate file. This diagnostic tool dumps the certificate files left over from upload operations - it does not dump or affect certif… |
| 1.3.6.1.4.1.388.6.3.34.6 | NodewvpnDDNSSettings | |||
| 1.3.6.1.4.1.388.6.3.34.6.1 | ScalarclearClientDNS | read-write | current | Remove all client IP addresses registered in the DNS server by the WVPN server. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.2 | ScalarupdateClientDNS | read-write | current | Re-register in the DNS server all client IP addresses owned by the WVPN server. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.3 | ScalaraddDNSAddr | read-write | current | Add a DNS server IP address. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.4 | ScalardeleteDNSAddr | read-write | current | Remove a DNS server IP address. This is a WRITE-ONLY value. To set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.5 | Scalarenable | read-write | current | Enable or disable DDNS service, or query the DDNS status. To get or set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.6 | Scalarttl | read-write | current | The time-to-live (ttl) value for a resource record stored in the DNS server. TTL is expressed as a percentage of the unused session timeout. To set it, use a M… |
| 1.3.6.1.4.1.388.6.3.34.6.7 | ScalarforwardZone | read-write | current | The forward zone name of the DNS server. To set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.8 | ScalarreverseZone | read-write | current | The reverse zone name of the DNS server. To set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.9 | ScalarclientNameString | read-write | current | A format string used by the WVPN server to construct client FQDN. To set it, use a MIB instance value of 0. |
| 1.3.6.1.4.1.388.6.3.34.6.10 | TablewvpnDDNSAddressTable | not-accessible | current | A table of DDNS IP addresses. |
| 1.3.6.1.4.1.388.6.3.34.6.10.1 | RowwvpnDDNSAddressEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.3.34.6.10.1.1 | ColumnwvpnDDNSAddressIndex | read-only | current | An integer index for the wvpnDDNSAddressTable to access a DNS server IP address. |
| 1.3.6.1.4.1.388.6.3.34.6.10.1.2 | ColumnwvpnDDNSipAddress | read-write | current | The IP address of the DNS server. |
| 1.3.6.1.4.1.388.6.3.34.6.11 | ScalarcleanupTimeout | read-write | current | Duration of cleanup timeout in sec. |
| 1.3.6.1.4.1.388.6.3.34.6.12 | ScalarreverseZoneList | read-only | current | List reverse zones of the DNS server. |
| 1.3.6.1.4.1.388.6.3.34.6.13 | ScalarreverseZoneAdd | read-write | current | Add new reverse zones for the DNS server. |
| 1.3.6.1.4.1.388.6.3.34.6.14 | ScalarreverseZoneDel | read-write | current | Delete a reverse zone from a list of reverse zones of the DNS Server. |
| 1.3.6.1.4.1.388.6.3.34.7 | NodewvpnRuntimeStats | |||
| 1.3.6.1.4.1.388.6.3.34.7.1 | TablewvpnSessionTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1 | RowwvpnSessionEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.1 | ColumnwvpnSessionIndex | read-only | current | An integer index for wvpnSessionTable to access a VPN session |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.2 | ColumnwvpnSessionId | read-only | current | The internal ID number by which the WVPN server identifies the session. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.3 | ColumnwvpnVpnIp | read-only | current | The private IP address assigned to the VPN client. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.4 | ColumnwvpnRealIp | read-only | current | The public IP address of the client prior to connecting to the VPN server. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.5 | ColumnwvpnLoginTime | read-only | current | The login time of the client |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.6 | ColumnwvpnRoamTime | read-only | current | Description. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.7 | ColumnwvpnLastActive | read-only | current | The last time that the client was active. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.8 | ColumnwvpnPoolName | read-only | current | The IP Pool from which the client got its' VPN IP address. |
| 1.3.6.1.4.1.388.6.3.34.7.1.1.9 | ColumnwvpnMacAddr | read-only | current | The MAC address of the client. |
| 1.3.6.1.4.1.388.6.3.34.7.2 | ScalarwvpnSessionCount | read-only | current | The number of VPN sessions. This is a READ-ONLY value. |
| 1.3.6.1.4.1.388.6.3.34.7.3 | ScalarwvpnRefreshSession | read-only | current | Refreshes the VPN session info. Returns a blank string This is a READ-ONLY value. |
| 1.3.6.1.4.1.388.6.3.34.7.4 | ScalarwvpnKillSession | read-write | current | Kills the VPN session specified by the written index number. For Example: setting this value to 4 would kill the fourth VPN session in the current list. This i… |
| 1.3.6.1.4.1.388.6.4 | NodesymbolCCPerformance | |||
| 1.3.6.1.4.1.388.6.5 | NodesymbolCCFault | |||
| 1.3.6.1.4.1.388.6.5.1 | NodeccTargetObjects | |||
| 1.3.6.1.4.1.388.6.5.1.1 | ScalarccTargetTrapString | accessible-for-notify | current | String that varies based on the trap that is being sent. |
| 1.3.6.1.4.1.388.6.5.1.2 | TableccTargetAddrTable | not-accessible | current | A table of transport addresses to be used in the generation of SNMP messages. Note: After make changes for this table objects, in order to make those modificat… |
| 1.3.6.1.4.1.388.6.5.1.2.1 | RowccTargetAddrEntry | not-accessible | current | A transport address to be used in the generation of SNMP operations. Entries in the ccTargetAddrTable are created and deleted using the ccTargetAddrRowStatus o… |
| 1.3.6.1.4.1.388.6.5.1.2.1.1 | ColumnccTargetAddrName | not-accessible | current | The locally arbitrary, but unique identifier associated with this ccTargetAddrEntry. |
| 1.3.6.1.4.1.388.6.5.1.2.1.2 | ColumnccTargetAddrSecName | read-create | current | This object contains a target(such as a snmp manager) secName. |
| 1.3.6.1.4.1.388.6.5.1.2.1.3 | ColumnccTargetAddrHost | read-create | current | This object contains a target(such as a snmp manager) ip address. |
| 1.3.6.1.4.1.388.6.5.1.2.1.4 | ColumnccTargetAddrCommunity | read-create | current | This object contains a community name. |
| 1.3.6.1.4.1.388.6.5.1.2.1.5 | ColumnccTargetAddrPort | read-create | current | This object specifies a port number for remote manager receiving the trap. |
| 1.3.6.1.4.1.388.6.5.1.2.1.6 | ColumnccTargetAddrStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.388.6.5.1.2.1.7 | ColumnccTargetAddrRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.388.6.5.1.2.1.8 | ColumnccTargetAddrOption | read-create | current | The write option for this conceptual row. com2sec(0), for setting up remote manager address. trap2sink(1), for setting up V2c trap target address. trapsink(2),… |
| 1.3.6.1.4.1.388.6.5.2 | NodeccTrapInfos | |||
| 1.3.6.1.4.1.388.6.5.2.1 | ScalarccTrapInfoEnableTrap | read-only | current | (true) implies that the traps subsystem is enabled. (false) implies that the traps subsystem is disabled. |
| 1.3.6.1.4.1.388.6.5.2.2 | ScalarccTrapInfoMaxNumSendOneTrap | read-write | current | The maximum number of times for sending one trap over the interval specified in ccTrapInfoInterval. |
| 1.3.6.1.4.1.388.6.5.2.3 | ScalarccTrapInfoInterval | read-write | current | No more than ccTrapInfoMaxNumSendOneTrap traps of same kind may be sent within this interval(in seconds). |
| 1.3.6.1.4.1.388.6.5.2.4 | ScalarccTrapInfoAclViolation | read-write | current | Enable(true)/Disable(false) this trap. MU assoc failed [ACL violation] |
| 1.3.6.1.4.1.388.6.5.2.5 | ScalarccTrapInfoDenyAdoption | read-write | current | Enable(true)/Disable(false) this trap. AP adopt failure [general] |
| 1.3.6.1.4.1.388.6.5.2.6 | ScalarccTrapInfoAPMUMaxExceed | read-write | current | Enable(true)/Disable(false) this trap. AP max MU count reached |
| 1.3.6.1.4.1.388.6.5.2.7 | ScalarccTrapInfoWLANMUMaxExceed | read-write | current | Enable(true)/Disable(false) this trap. WLAN max MU count reached |
| 1.3.6.1.4.1.388.6.5.2.8 | ScalarccTrapInfoApDetected | read-write | current | Enable(true)/Disable(false) this trap. AP detected |
| 1.3.6.1.4.1.388.6.5.2.9 | ScalarccTrapInfoApAdopted | read-write | current | Enable(true)/Disable(false) this trap. AP status [adopted] |
| 1.3.6.1.4.1.388.6.5.2.10 | ScalarccTrapInfoApReset | read-write | current | Enable(true)/Disable(false) this trap. AP status [reset] |
| 1.3.6.1.4.1.388.6.5.2.11 | ScalarccTrapInfoApUnavailable | read-write | current | Enable(true)/Disable(false) this trap. AP status [offline] |
| 1.3.6.1.4.1.388.6.5.2.13 | ScalarccTrapInfoKDCUserAuthFail | read-write | current | Enable(true)/Disable(false) this trap. MU Kerberos auth failed |
| 1.3.6.1.4.1.388.6.5.2.14 | ScalarccTrapInfoRadiusAuthFail | read-write | current | Enable(true)/Disable(false) this trap. Mgt user auth failed [radius] |
| 1.3.6.1.4.1.388.6.5.2.16 | ScalarccTrapInfoLowFlashSpace | read-write | current | Enable(true)/Disable(false) this trap. Low flash space on switch |
| 1.3.6.1.4.1.388.6.5.2.17 | ScalarccTrapInfoNicDropping | read-write | current | Enable(true)/Disable(false) this trap. Ether port disconnected |
| 1.3.6.1.4.1.388.6.5.2.19 | ScalarccTrapInfoApAlert | read-write | current | Enable(true)/Disable(false) this trap. AP status [alert] |
| 1.3.6.1.4.1.388.6.5.2.20 | ScalarccTrapInfoUserAuthFail | read-write | current | Enable(true)/Disable(false) this trap. Mgt user auth rejected |
| 1.3.6.1.4.1.388.6.5.2.21 | ScalarccTrapInfoHsbPrimaryNoHeartbeat | read-write | current | Enable(true)/Disable(false) this trap. Primary lost heartbeat |
| 1.3.6.1.4.1.388.6.5.2.22 | ScalarccTrapInfoHsbStandbyEntersFailover | read-write | current | Enable(true)/Disable(false) this trap. Standby active |
| 1.3.6.1.4.1.388.6.5.2.23 | ScalarccTrapInfoPrimaryFailedResetting | read-write | current | Enable(true)/Disable(false) this trap. Primary internal failure [reset] |
| 1.3.6.1.4.1.388.6.5.2.25 | ScalarccTrapInfoKDCPropagationFail | read-write | current | Enable(true)/Disable(false) this trap. KDC propagation failure |
| 1.3.6.1.4.1.388.6.5.2.26 | ScalarccTrapInfoHighDecryptFail | read-write | current | Enable(true)/Disable(false) this trap. MU TKIP [decrypt failure] |
| 1.3.6.1.4.1.388.6.5.2.27 | ScalarccTrapInfoHighReplyFail | read-write | current | Enable(true)/Disable(false) this trap. MU TKIP [replay failure] |
| 1.3.6.1.4.1.388.6.5.2.28 | ScalarccTrapInfoTKIPMICFail | read-write | current | Enable(true)/Disable(false) this trap. MU TKIP [MIC error] |
| 1.3.6.1.4.1.388.6.5.2.29 | ScalarccTrapInfoWPACounterMeasureStart | read-write | current | Enable(true)/Disable(false) this trap. WPA counter-measures [active] |
| 1.3.6.1.4.1.388.6.5.2.31 | ScalarlicenseChangedControl | read-write | current | Enable(true)/Disable(false) this trap. License number change |
| 1.3.6.1.4.1.388.6.5.2.32 | ScalarclockChangedControl | read-write | current | Enable(true)/Disable(false) this trap. Clock change |
| 1.3.6.1.4.1.388.6.5.2.33 | ScalarpktDiscWrongNICControl | read-write | current | Enable(true)/Disable(false) this trap. Packet discard [wrong NIC] |
| 1.3.6.1.4.1.388.6.5.2.34 | ScalarpktDiscWrongVLANControl | read-write | current | Enable(true)/Disable(false) this trap. Packet discard [wrong VLAN] |
| 1.3.6.1.4.1.388.6.5.2.35 | ScalarapAdoptFailPolControl | read-write | current | Enable(true)/Disable(false) this trap. AP adopt failure [policy disallow] |
| 1.3.6.1.4.1.388.6.5.2.36 | ScalarapAdoptFailACLControl | read-write | current | Enable(true)/Disable(false) this trap. AP adopt failure [acl disallow] |
| 1.3.6.1.4.1.388.6.5.2.37 | ScalarapAdoptFailLimitControl | read-write | current | Enable(true)/Disable(false) this trap. AP adopt failure [limit exceeded] |
| 1.3.6.1.4.1.388.6.5.2.38 | ScalarapAdoptFailLicControl | read-write | current | Enable(true)/Disable(false) this trap. AP adopt failure [license disallow] |
| 1.3.6.1.4.1.388.6.5.2.39 | ScalarapAdoptFailNoImgControl | read-write | current | Enable(true)/Disable(false) this trap. AP adopt failure [no image] |
| 1.3.6.1.4.1.388.6.5.2.40 | ScalarapCfgFailESSControl | read-write | current | Enable(true)/Disable(false) this trap. AP config failed [wrong ESS] |
| 1.3.6.1.4.1.388.6.5.2.41 | ScalardevDropInfoMsgControl | read-write | current | Enable(true)/Disable(false) this trap. Device msg dropped [info] |
| 1.3.6.1.4.1.388.6.5.2.42 | ScalardevdropLoadmeMsgControl | read-write | current | Enable(true)/Disable(false) this trap. Device msg dropped [loadme] |
| 1.3.6.1.4.1.388.6.5.2.43 | ScalaretherConnectControl | read-write | current | Enable(true)/Disable(false) this trap. Ether port connected |
| 1.3.6.1.4.1.388.6.5.2.44 | ScalarmuAssocFailControl | read-write | current | Enable(true)/Disable(false) this trap. MU assoc failed |
| 1.3.6.1.4.1.388.6.5.2.45 | ScalarmuAssocOKControl | read-write | current | Enable(true)/Disable(false) this trap. MU status [associated] |
| 1.3.6.1.4.1.388.6.5.2.46 | ScalarmuRoamedControl | read-write | current | Enable(true)/Disable(false) this trap. MU status [roamed] |
| 1.3.6.1.4.1.388.6.5.2.47 | ScalarmuDisassocControl | read-write | current | Enable(true)/Disable(false) this trap. MU status [disassociated] |
| 1.3.6.1.4.1.388.6.5.2.48 | ScalarmuEAPAuthFailControl | read-write | current | Enable(true)/Disable(false) this trap. MU EAP auth failed |
| 1.3.6.1.4.1.388.6.5.2.49 | ScalarmuEAPAuthOKControl | read-write | current | Enable(true)/Disable(false) this trap. MU EAP auth success |
| 1.3.6.1.4.1.388.6.5.2.50 | ScalarmuKDCAuthOKControl | read-write | current | Enable(true)/Disable(false) this trap. MU Kerberos auth success |
| 1.3.6.1.4.1.388.6.5.2.51 | ScalarwlanAuthOKControl | read-write | current | Enable(true)/Disable(false) this trap. WLAN auth success |
| 1.3.6.1.4.1.388.6.5.2.52 | ScalarwlanAuthFailControl | read-write | current | Enable(true)/Disable(false) this trap. WLAN auth failed |
| 1.3.6.1.4.1.388.6.5.2.53 | ScalaruserAuthOKControl | read-write | current | Enable(true)/Disable(false) this trap. Mgt user auth success [radius] |
| 1.3.6.1.4.1.388.6.5.2.54 | ScalarradiusSrvTimeoutControl | read-write | current | Enable(true)/Disable(false) this trap. Radius server timeout |
| 1.3.6.1.4.1.388.6.5.2.55 | ScalarkdcPrincAddControl | read-write | current | Enable(true)/Disable(false) this trap. KDC user [added] |
| 1.3.6.1.4.1.388.6.5.2.56 | ScalarkdcPrincChgdControl | read-write | current | Enable(true)/Disable(false) this trap. KDC user [changed] |
| 1.3.6.1.4.1.388.6.5.2.57 | ScalarkdcPrincDelControl | read-write | current | Enable(true)/Disable(false) this trap. KDC user [deleted] |
| 1.3.6.1.4.1.388.6.5.2.58 | ScalarkdcDBReplacedControl | read-write | current | Enable(true)/Disable(false) this trap. KDC DB replaced |
| 1.3.6.1.4.1.388.6.5.2.59 | ScalarhsbStdbyAutoRevControl | read-write | current | Enable(true)/Disable(false) this trap. Standy auto-revert |
| 1.3.6.1.4.1.388.6.5.2.60 | ScalarhsbPrimAutoRevControl | read-write | current | Enable(true)/Disable(false) this trap. Primary auto-revert |
| 1.3.6.1.4.1.388.6.5.2.61 | ScalaracsErrorControl | read-write | current | Enable(true)/Disable(false) this trap. Auto channel select error |
| 1.3.6.1.4.1.388.6.5.2.62 | ScalareopActiveControl | read-write | current | Enable(true)/Disable(false) this trap. Emergency Policy [active] |
| 1.3.6.1.4.1.388.6.5.2.63 | ScalareopInactiveControl | read-write | current | Enable(true)/Disable(false) this trap. Emergency Policy [deactivated] |
| 1.3.6.1.4.1.388.6.5.2.64 | ScalardebugEventControl | read-only | current | This trap is read only. Miscellaneous debug events |
| 1.3.6.1.4.1.388.6.5.2.65 | ScalarhsbStartUpControl | read-write | current | Enable(true)/Disable(false) this trap. HSB Starts Up |
| 1.3.6.1.4.1.388.6.5.2.66 | ScalarhsbPeerConnectControl | read-write | current | Enable(true)/Disable(false) this trap. HSB Peer Connect |
| 1.3.6.1.4.1.388.6.5.2.67 | ScalarccFanAndTempControl | read-write | current | Enable(true)/Disable(false) this trap. Fan and Temp Notification. |
| 1.3.6.1.4.1.388.6.5.2.68 | ScalarccAccessChangedControl | read-write | current | Enable(true)/Disable(false) this trap. Access Changed Notification. |
| 1.3.6.1.4.1.388.6.5.2.69 | ScalartpcPowerReducedControl | read-write | current | Enable(true)/Disable(false) this trap. Radio power is reduced [TPC] |
| 1.3.6.1.4.1.388.6.5.2.70 | ScalardfsRadarDetectControl | read-write | current | Enable(true)/Disable(false) this trap. Radar is detected [DFS] |
| 1.3.6.1.4.1.388.6.5.2.71 | ScalardfsChannelSelectControl | read-write | current | Enable(true)/Disable(false) this trap. Channel selected to avoid radar [DFS] |
| 1.3.6.1.4.1.388.6.5.2.72 | ScalardfsChannelSwitchControl | read-write | current | Enable(true)/Disable(false) this trap. Switch to new channel [DFS] |
| 1.3.6.1.4.1.388.6.5.2.73 | ScalardfsChannelRevertControl | read-write | current | Enable(true)/Disable(false) this trap. Revert back to original channel [DFS] |
| 1.3.6.1.4.1.388.6.5.2.74 | ScalarradioSuspendControl | read-write | current | Enable(true)/Disable(false) this trap. Radio is suspended - no available channels |
| 1.3.6.1.4.1.388.6.5.2.75 | ScalarradioResumeControl | read-write | current | Enable(true)/Disable(false) this trap. Radio is resumed |
| 1.3.6.1.4.1.388.6.5.2.76 | ScalarradioRandomChannelControl | read-write | current | Enable(true)/Disable(false) this trap. Radio is moved to random channel |
| 1.3.6.1.4.1.388.6.5.2.77 | ScalarccRapNewRogueApControl | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.5.2.78 | ScalarccRapNewApprovedApControl | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.5.2.79 | ScalarccTrapInfoWVPNAlert | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent when there are any anomalies with the client/server certificates. |
| 1.3.6.1.4.1.388.6.5.2.80 | ScalarccTrapInfoWVPNInfo | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent when there are any client/server configuration changes or connection establishments. |
| 1.3.6.1.4.1.388.6.5.2.81 | ScalarccTrapInfoRadiusAcct | read-write | current | Enable(1)/Disable(2) the trap for Radius Accounting Log. This trap is not supported. |
| 1.3.6.1.4.1.388.6.5.2.82 | ScalarccInfoRadiusServerControl | read-write | current | Enable(1)/Disable(2) this trap. |
| 1.3.6.1.4.1.388.6.5.2.83 | ScalarconfigChangeUpdateControl | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent whenever there is a configuration change in the switch. |
| 1.3.6.1.4.1.388.6.5.2.84 | ScalartunnelStatusChangedControl | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent whenever there is a Tuneel Status Change |
| 1.3.6.1.4.1.388.6.5.2.85 | ScalartunnelUnknownProtocolControl | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent whenever there is a non Ip packet received on Tunnel |
| 1.3.6.1.4.1.388.6.5.2.86 | ScalarccSumStatsApControl | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.5.2.87 | ScalarccSumStatsMuControl | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.5.2.88 | ScalarccSumStatsWlanControl | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.5.2.89 | ScalarccSumStatsSwitchControl | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.5.2.90 | ScalarsensorConvertControl | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent when AP is converted to sensor |
| 1.3.6.1.4.1.388.6.5.2.91 | ScalarsensorRevertControl | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent when Sensor is reverted back to AP |
| 1.3.6.1.4.1.388.6.5.2.92 | ScalarsensorFailureControl | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent when Failed to communicate to a sensor |
| 1.3.6.1.4.1.388.6.5.2.93 | ScalarsensorOfflineControl | read-write | current | Enable(1)/Disable(2) this trap. This trap is sent when Sensor is no longer responding to ping |
| 1.3.6.1.4.1.388.6.5.3 | NodesymbolCCTraps | |||
| 1.3.6.1.4.1.388.6.5.3.1 | NotificationccTrapLowFlashSpace | current | Low flash space on switch This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - sysLowFlashSpace | |
| 1.3.6.1.4.1.388.6.5.3.3 | NotificationccTrapNicDropping | current | Ether port disconnected This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - etherDisconnect | |
| 1.3.6.1.4.1.388.6.5.3.6 | NotificationccTrapAPMUMaxExceed | current | AP max MU count reached This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apMaxMU | |
| 1.3.6.1.4.1.388.6.5.3.7 | NotificationccTrapWLANMUMaxExceed | current | WLAN max MU count reached This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - wlanMaxMUCount | |
| 1.3.6.1.4.1.388.6.5.3.8 | NotificationccTrapAPDetected | current | AP detected This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apDetected | |
| 1.3.6.1.4.1.388.6.5.3.9 | NotificationccTrapAPAdopted | current | AP status [adopted] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apAdopted | |
| 1.3.6.1.4.1.388.6.5.3.10 | NotificationccTrapAPReset | current | AP status [reset] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apReset | |
| 1.3.6.1.4.1.388.6.5.3.11 | NotificationccTrapAPUnavailable | current | AP status [offline] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apOffline | |
| 1.3.6.1.4.1.388.6.5.3.12 | NotificationccTrapAPAlert | current | AP status [alert] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apAlert | |
| 1.3.6.1.4.1.388.6.5.3.13 | NotificationccTrapUserAuthFail | current | Mgt user auth rejected This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - userAuthRejected | |
| 1.3.6.1.4.1.388.6.5.3.14 | NotificationccTrapRadiusAuthFail | current | Mgt user auth failed [radius] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - userAuthFail | |
| 1.3.6.1.4.1.388.6.5.3.16 | NotificationccTrapACLViolation | current | MU assoc failed [ACL violation] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muAssocFailACL | |
| 1.3.6.1.4.1.388.6.5.3.18 | NotificationccTrapDenyAPAdoption | current | AP adopt failure [general] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - apAdoptFail | |
| 1.3.6.1.4.1.388.6.5.3.20 | NotificationccTrapHsbPrimaryNoHeartbeat | current | Primary lost heartbeat This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbPrimHBLoss | |
| 1.3.6.1.4.1.388.6.5.3.21 | NotificationccTrapHsbStandbyEntersFailover | current | Standby active This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbFailover | |
| 1.3.6.1.4.1.388.6.5.3.22 | NotificationccTrapHsbPrimaryFailedResetting | current | Primary internal failure [reset] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbPrimFail | |
| 1.3.6.1.4.1.388.6.5.3.23 | NotificationccTrapHsbStandbyFailedResetting | current | Standby internal failure [reset] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - hsbStdbyFail | |
| 1.3.6.1.4.1.388.6.5.3.24 | NotificationccTrapKDCUserAuthFail | current | MU Kerberos auth failed This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muKDCAuthFail | |
| 1.3.6.1.4.1.388.6.5.3.25 | NotificationccTrapKDCPropagationFail | current | KDC propagation failure This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - kdcPropFail | |
| 1.3.6.1.4.1.388.6.5.3.26 | NotificationccTrapHighDecryptFail | current | MU TKIP [decrypt failure] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muTKIPDecyptFail | |
| 1.3.6.1.4.1.388.6.5.3.27 | NotificationccTrapHighReplyFail | current | MU TKIP [replay failure] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muTKIPReplayFail | |
| 1.3.6.1.4.1.388.6.5.3.28 | NotificationccTrapTKIPMICFail | current | MU TKIP [MIC error] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - muTKIPMicError | |
| 1.3.6.1.4.1.388.6.5.3.29 | NotificationccTrapWPACounterMeasureStart | current | WPA counter-measures [active] This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event - wpaCntrMsrAct | |
| 1.3.6.1.4.1.388.6.5.3.31 | NotificationlicenseChanged | current | License number change | |
| 1.3.6.1.4.1.388.6.5.3.32 | NotificationclockChanged | current | Clock change | |
| 1.3.6.1.4.1.388.6.5.3.33 | NotificationpktDiscWrongNIC | current | Packet discard [wrong NIC] | |
| 1.3.6.1.4.1.388.6.5.3.34 | NotificationpktDiscWrongVLAN | current | Packet discard [wrong VLAN] | |
| 1.3.6.1.4.1.388.6.5.3.35 | NotificationapAdoptFailPol | current | AP adopt failure [policy disallow] | |
| 1.3.6.1.4.1.388.6.5.3.36 | NotificationapAdoptFailACL | current | AP adopt failure [acl disallow] | |
| 1.3.6.1.4.1.388.6.5.3.37 | NotificationapAdoptFailLimit | current | AP adopt failure [limit exceeded] | |
| 1.3.6.1.4.1.388.6.5.3.38 | NotificationapAdoptFailLic | current | AP adopt failure [license disallow] | |
| 1.3.6.1.4.1.388.6.5.3.39 | NotificationapAdoptFailNoImg | current | AP adopt failure [no image] | |
| 1.3.6.1.4.1.388.6.5.3.40 | NotificationapCfgFailESS | current | AP config failed [wrong ESS] | |
| 1.3.6.1.4.1.388.6.5.3.41 | NotificationdevDropInfoMsg | current | Device msg dropped [info] | |
| 1.3.6.1.4.1.388.6.5.3.42 | NotificationdevdropLoadmeMsg | current | Device msg dropped [loadme] | |
| 1.3.6.1.4.1.388.6.5.3.43 | NotificationetherConnect | current | Ether port connected | |
| 1.3.6.1.4.1.388.6.5.3.44 | NotificationmuAssocFail | current | MU assoc failed | |
| 1.3.6.1.4.1.388.6.5.3.45 | NotificationmuAssocOK | current | MU status [associated] | |
| 1.3.6.1.4.1.388.6.5.3.46 | NotificationmuRoamed | current | MU status [roamed] | |
| 1.3.6.1.4.1.388.6.5.3.47 | NotificationmuDisassoc | current | MU status [disassociated] | |
| 1.3.6.1.4.1.388.6.5.3.48 | NotificationmuEAPAuthFail | current | MU EAP auth failed | |
| 1.3.6.1.4.1.388.6.5.3.49 | NotificationmuEAPAuthOK | current | MU EAP auth success | |
| 1.3.6.1.4.1.388.6.5.3.50 | NotificationmuKDCAuthOK | current | MU Kerberos auth success | |
| 1.3.6.1.4.1.388.6.5.3.51 | NotificationwlanAuthOK | current | WLAN auth success | |
| 1.3.6.1.4.1.388.6.5.3.52 | NotificationwlanAuthFail | current | WLAN auth failed | |
| 1.3.6.1.4.1.388.6.5.3.53 | NotificationuserAuthOK | current | Mgt user auth success [radius] | |
| 1.3.6.1.4.1.388.6.5.3.54 | NotificationradiusSrvTimeout | current | Radius server timeout | |
| 1.3.6.1.4.1.388.6.5.3.55 | NotificationkdcPrincAdd | current | KDC user [added] | |
| 1.3.6.1.4.1.388.6.5.3.56 | NotificationkdcPrincChgd | current | KDC user [changed] | |
| 1.3.6.1.4.1.388.6.5.3.57 | NotificationkdcPrincDel | current | KDC user [deleted] | |
| 1.3.6.1.4.1.388.6.5.3.58 | NotificationkdcDBReplaced | current | KDC DB replaced | |
| 1.3.6.1.4.1.388.6.5.3.59 | NotificationhsbStdbyAutoRev | current | Standy auto-revert | |
| 1.3.6.1.4.1.388.6.5.3.60 | NotificationhsbPrimAutoRev | current | Primary auto-revert | |
| 1.3.6.1.4.1.388.6.5.3.61 | NotificationacsError | current | Auto channel select error | |
| 1.3.6.1.4.1.388.6.5.3.62 | NotificationeopActive | current | Emergency Policy [active] | |
| 1.3.6.1.4.1.388.6.5.3.63 | NotificationeopInactive | current | Emergency Policy [deactivated] | |
| 1.3.6.1.4.1.388.6.5.3.64 | NotificationdebugEvent | current | Miscellaneous debug events | |
| 1.3.6.1.4.1.388.6.5.3.65 | NotificationhsbStartUp | current | HSB Starts Up | |
| 1.3.6.1.4.1.388.6.5.3.66 | NotificationhsbPeerConnect | current | HSB Peer Connect | |
| 1.3.6.1.4.1.388.6.5.3.67 | NotificationccFanAndTempNotification | current | Notification sent if the given threshold has been exceeded. | |
| 1.3.6.1.4.1.388.6.5.3.68 | NotificationccAccessChangedNotification | current | This notification is sent if the permitted methods of access has changed. Note that each change to the access methods permitted generates a separate notificati… | |
| 1.3.6.1.4.1.388.6.5.3.69 | NotificationtpcPowerReduced | current | Radio power is reduced [TPC] | |
| 1.3.6.1.4.1.388.6.5.3.70 | NotificationdfsRadarDetect | current | Radar is detected [DFS] | |
| 1.3.6.1.4.1.388.6.5.3.71 | NotificationdfsChannelSelect | current | Channel selected to avoid radar [DFS] | |
| 1.3.6.1.4.1.388.6.5.3.72 | NotificationdfsChannelSwitch | current | Switch to new channel [DFS] | |
| 1.3.6.1.4.1.388.6.5.3.73 | NotificationdfsChannelRevert | current | Revert back to original channel [DFS] | |
| 1.3.6.1.4.1.388.6.5.3.74 | NotificationradioSuspend | current | Radio is suspended - no available channels | |
| 1.3.6.1.4.1.388.6.5.3.75 | NotificationradioResume | current | Radio is resumed | |
| 1.3.6.1.4.1.388.6.5.3.76 | NotificationradioRandomChannel | current | Radio is moved to random channel | |
| 1.3.6.1.4.1.388.6.5.3.77 | NotificationccRapNewRogueAp | current | A new AP has been heard that was NOT authorized. | |
| 1.3.6.1.4.1.388.6.5.3.78 | NotificationccRapNewApprovedAp | current | A new AP has been heard that was in some manner authorized. | |
| 1.3.6.1.4.1.388.6.5.3.79 | NotificationccTrapWVPNAlert | current | ccTrapWVPNAlert trap. This trap is sent when there are any anomalies with the client/server certificates. | |
| 1.3.6.1.4.1.388.6.5.3.80 | NotificationccTrapWVPNInfo | current | ccTrapWVPNInfo Trap. This trap is sent when there are any client/server configuration changes or connection establishments. | |
| 1.3.6.1.4.1.388.6.5.3.81 | NotificationccTrapInfoRadiusAcctInfo | current | ccTrapInfoRadiusAcct: This trap is not supported. | |
| 1.3.6.1.4.1.388.6.5.3.82 | NotificationccInfoRadiusServer | current | This trap is sent when ccRadiusServer is enabled/disabled or it's configuration changes are saved. | |
| 1.3.6.1.4.1.388.6.5.3.83 | NotificationconfigChangeUpdate | current | A trap for every configuration change happening in the switch. | |
| 1.3.6.1.4.1.388.6.5.3.84 | NotificationtunnelStatusChanged | current | This trap is sent whenever there is a Tuneel Status Change | |
| 1.3.6.1.4.1.388.6.5.3.85 | NotificationtunnelUnknownProtocol | current | This trap is sent whenever there is a non Ip packet received on Tunnel | |
| 1.3.6.1.4.1.388.6.5.3.86 | NotificationccSumStatsAp | current | A summary statistic has crossed the prescribed threshold by a Portal. Example: Threshold #%s1 of value %s2 (units:%s3) has been crossed by Portal index=%s4 wit… | |
| 1.3.6.1.4.1.388.6.5.3.87 | NotificationccSumStatsMu | current | A summary statistic has crossed the prescribed threshold by an MU. Example: Threshold '%s1' of value %s2 (units:%s3) has been crossed by MU MAC=%s4 with IP-add… | |
| 1.3.6.1.4.1.388.6.5.3.88 | NotificationccSumStatsWlan | current | A summary statistic has crossed the prescribed threshold by a WLAN. Example: Threshold #%s1 of value %s2 (units:%s3) has been crossed by WLAN index=%s4 with na… | |
| 1.3.6.1.4.1.388.6.5.3.89 | NotificationccSumStatsSwitch | current | A summary statistic has crossed the prescribed threshold by the entire Switch. Example: Threshold %s1 of value %s2 (units:%s3) has been crossed by the entire s… | |
| 1.3.6.1.4.1.388.6.5.3.90 | NotificationsensorConvert | current | Enable(1)/Disable(2) this trap. This trap is sent when AP is converted to sensor | |
| 1.3.6.1.4.1.388.6.5.3.91 | NotificationsensorRevert | current | Enable(1)/Disable(2) this trap. This trap is sent when Sensor is reverted back to AP | |
| 1.3.6.1.4.1.388.6.5.3.92 | NotificationsensorFailure | current | Enable(1)/Disable(2) this trap. This trap is sent when Failed to communicate to a sensor | |
| 1.3.6.1.4.1.388.6.5.3.93 | NotificationsensorOffline | current | Enable(1)/Disable(2) this trap. This trap is sent when Sensor is no longer responding to ping | |
| 1.3.6.1.4.1.388.6.6 | NodesymbolCCNewInV1dot2dot5 | |||
| 1.3.6.1.4.1.388.6.6.1 | NodeccIdentfication | |||
| 1.3.6.1.4.1.388.6.6.1.1 | ScalarccIdHwVersion | read-only | current | The same text that follows 'HW=' in sysDescr, EXCLUDING the 'HW='. |
| 1.3.6.1.4.1.388.6.6.1.2 | ScalarccIdFwVersion | read-only | current | The same text that follows 'FW=' in sysDescr, EXCLUDING the 'FW='. (The bootcode version). |
| 1.3.6.1.4.1.388.6.6.1.3 | ScalarccIdSwVersion | read-only | current | The same text that follows 'SW=' in sysDescr, EXCLUDING the 'SW='. |
| 1.3.6.1.4.1.388.6.6.1.4 | ScalarccIdMibVersion | read-only | current | The same text that follows 'MIB=' in sysDescr, EXCLUDING the 'MIB='. The MIB version is identified by a two-digit number and a single letter. For example, '07a… |
| 1.3.6.1.4.1.388.6.6.1.5 | ScalarccIdCliVersion | read-only | current | The same text that follows 'CLI=' in sysDescr, EXCLUDING the 'CLI='. |
| 1.3.6.1.4.1.388.6.6.1.6 | ScalarccIdXmlVersion | read-only | current | Version of XML template implemented on this switch. (Much like MIB version - read details there). |
| 1.3.6.1.4.1.388.6.6.1.7 | ScalarccIdSerialNumber | read-only | current | The serial number of the switch. This value is unique for each instance of a given switch type. |
| 1.3.6.1.4.1.388.6.6.1.8 | ScalarccIdSwBuildDate | read-only | current | The date & time the software was built; (corresponding to 'ccIdSwVersion' - there is no corresponding value for 'ccIdFwVersion'). The format of this data is no… |
| 1.3.6.1.4.1.388.6.6.1.9 | ScalarccIdSwBuildInfo | read-only | current | Additional information about the particular build of the software running on the switch; (corresponding to 'ccIdSwVersion' - there is no corresponding value fo… |
| 1.3.6.1.4.1.388.6.6.1.10 | ScalarccIdProductFamily | read-only | current | Describes the product family. For all Butterfly implementations, this will be 'WS5000'. |
| 1.3.6.1.4.1.388.6.6.1.11 | ScalarccIdProductModel | read-only | current | Describes the product model. For Butterfly, this will be '5000' or '5100'. |
| 1.3.6.1.4.1.388.6.6.2 | NodeccHwSensors | |||
| 1.3.6.1.4.1.388.6.6.2.1 | ScalarccHwSensorsReset | read-write | current | Set to TRUE to reset the max values seen so far. |
| 1.3.6.1.4.1.388.6.6.2.2 | TableccHwSensorsTable | not-accessible | current | A table of fan and temp sensors for this switch. (A table was used rather than a collection of scalars, so that one table could describe numerous different con… |
| 1.3.6.1.4.1.388.6.6.2.2.1 | RowccHwSensorsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.6.2.2.1.1 | ColumnccHwSensorsIndex | accessible-for-notify | current | Simple index. |
| 1.3.6.1.4.1.388.6.6.2.2.1.2 | ColumnccHwSensorsType | read-only | current | Tells the type of the fan or temp sensor, and the corresponding units for the readings. Note that any given temp sensors appears in this table only once; (NOT … |
| 1.3.6.1.4.1.388.6.6.2.2.1.3 | ColumnccHwSensorsDescr | read-only | current | A short, text description of the sensor. For example: 'system fan' 'CPU fan/blower' 'CPU temperature' 'ambient temperature - near CPU' 'ambient temperature - s… |
| 1.3.6.1.4.1.388.6.6.2.2.1.4 | ColumnccHwSensorsCurrentReading | read-only | current | The current, live reading for that sensor. For sensors of type onOffFanInDutyCycle, this value will be 0 if the fan is currently not running, and 1 if the fan … |
| 1.3.6.1.4.1.388.6.6.2.2.1.5 | ColumnccHwSensorsMinimum | read-only | current | The minimum reading observed since system reboot, (or since the fan/temp readings were reset). For sensors of type onOffFanInDutyCycle, this value will be the … |
| 1.3.6.1.4.1.388.6.6.2.2.1.6 | ColumnccHwSensorsMaximum | read-only | current | The maximum observed since system reboot, (or since the fan/temp readings were reset). For sensors of type onOffFanInDutyCycle, this value will be the maximum … |
| 1.3.6.1.4.1.388.6.6.2.2.1.7 | ColumnccHwSensorsNotifyIfAbove | read-write | current | When the given sensor's reading exceeds this threshold, a notification is generated. If no notifications are desired for this sensor, set this threshold to 0. … |
| 1.3.6.1.4.1.388.6.6.3 | NodeccSsh | |||
| 1.3.6.1.4.1.388.6.6.3.1 | ScalarccSshEnabled | read-write | current | Set to TRUE to enable SSH access to switch. |
| 1.3.6.1.4.1.388.6.6.3.2 | ScalarccSshProtocolVersion | read-write | current | The version of SSH to use in communicating with the switch. |
| 1.3.6.1.4.1.388.6.6.3.3 | ScalarccSshPort | read-write | current | Port number to use in talking SSH to the switch. Factory-default value is 22.The valid ranges are 1025-65535, 22. |
| 1.3.6.1.4.1.388.6.6.3.4 | ScalarccSshAuthenticationTimeout | read-only | deprecated | If the SSH user has not been re-authenticated within this period of time, the connection will be dropped. |
| 1.3.6.1.4.1.388.6.6.3.5 | ScalarccSshInactivityTimeout | read-only | deprecated | If there has been no activity on the connection for this period of time, the connection will be dropped. Factory-default value is 5min. |
| 1.3.6.1.4.1.388.6.6.4 | NodeccAccessMethods | |||
| 1.3.6.1.4.1.388.6.6.4.1 | ScalarccAccessMethodsPermitted | read-write | deprecated | A BITs value that indicates which management methods are currently permitted to the switch. |
| 1.3.6.1.4.1.388.6.6.1000 | NodeccV1dot2dot5Groups | |||
| 1.3.6.1.4.1.388.6.6.1000.1 | IdentityccModuleId | Description. | ||
| 1.3.6.1.4.1.388.6.6.1000.2 | Groupv1dot2dot5Group | current | Description. | |
| 1.3.6.1.4.1.388.6.6.1000.3 | Groupv1dot2dot5NotificationGroup | current | Description. | |
| 1.3.6.1.4.1.388.6.6.1000.4 | Groupv1dot2dot5GroupOfDepricated | deprecated | Description. | |
| 1.3.6.1.4.1.388.6.9 | NodeccRadiusServer | |||
| 1.3.6.1.4.1.388.6.9.1 | NodeccRadius | |||
| 1.3.6.1.4.1.388.6.9.1.1 | ScalarccRadiusDataSource | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.9.1.2 | ScalarccRadiusDefaultEapType | read-write | current | Description. Deafult EAP type advertised by the radius server. |
| 1.3.6.1.4.1.388.6.9.1.3 | ScalarccRadiusAuthTypePeap | read-write | current | Description. Type of EAP type within PEAP |
| 1.3.6.1.4.1.388.6.9.1.4 | ScalarccRadiusAuthTypeTtls | read-write | current | Description. Type of EAP type within TTLS |
| 1.3.6.1.4.1.388.6.9.1.5 | ScalarccRadiusServerCertificate | read-write | current | This OID is used to import the server certificate syntax:- /image/<server certificate file name> or <file path>/<server certificate file name> Note:- user can … |
| 1.3.6.1.4.1.388.6.9.1.6 | ScalarccRadiusCACertificate | read-write | current | This OID is used to import the CA certificate syntax:- /image/<CA certificate file name> or <file path>/<CA certificate file name> Note:- user can copy the cer… |
| 1.3.6.1.4.1.388.6.9.1.7 | TableccRadiusClientAuthTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.1.7.1 | RowccRadiusClientAuthEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.1.7.1.1 | ColumnccRadiusClientAuthIndex | read-create | current | This table(ccRadiusClientAuthTable) is indexed by the radius client name.Therefore this OID contains the Client Name. When this table is created, the client na… |
| 1.3.6.1.4.1.388.6.9.1.7.1.2 | ColumnccRadiusClientAuthIpAddr | read-create | current | The client IP address. |
| 1.3.6.1.4.1.388.6.9.1.7.1.3 | ColumnccRadiusClientAuthMask | read-create | current | Mask of the client's IP address |
| 1.3.6.1.4.1.388.6.9.1.7.1.4 | ColumnccRadiusClientAuthSharedSecret | read-create | current | Shared secret between the client and the radius server |
| 1.3.6.1.4.1.388.6.9.1.7.1.5 | ColumnccRadiusClientAuthRowStatus | read-create | current | Create/destroy a Row |
| 1.3.6.1.4.1.388.6.9.1.8 | ScalarccRadiusServerEnable | read-write | current | Enable(1) or disable(2) the radius server. Note:Before enabling or disabling radius server save the radius server status to make effect of the modifications do… |
| 1.3.6.1.4.1.388.6.9.1.9 | ScalarccRadiusSaveStatus | read-write | current | Save the configuration info for the radius server. You can only enable (1) this OID. Disable(2) is not a valid input.This OID is SET only. |
| 1.3.6.1.4.1.388.6.9.1.10 | ScalarccRadiusEapPasswd | read-write | current | Enter the Private Key Password for Eap which was used to generate the certificates. |
| 1.3.6.1.4.1.388.6.9.2 | NodeccRadiusProxy | |||
| 1.3.6.1.4.1.388.6.9.2.1 | ScalarccRadiusProxyRetryCount | read-write | current | Description. Number of retries for sending messages to a proxy |
| 1.3.6.1.4.1.388.6.9.2.2 | ScalarccRadiusProxyTimeout | read-write | current | Description. Timeout in seconds before retrying to a proxy |
| 1.3.6.1.4.1.388.6.9.2.3 | TableccRadiusProxyServerTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.2.3.1 | RowccRadiusProxyServerEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.2.3.1.1 | ColumnccRadiusProxyServerIndex | read-create | current | Description. A get operation on this OID displays the Proxy Server Name. This table is indexed by this name hence user has to give the Proxy server name as inp… |
| 1.3.6.1.4.1.388.6.9.2.3.1.2 | ColumnccRadiusProxyServerPrefixOrSuffix | read-create | current | Description. Prefix of suffix used for proxying radius request to a proxy server Note:The value of this OID has to be unique among existing proxy server.If the… |
| 1.3.6.1.4.1.388.6.9.2.3.1.3 | ColumnccRadiusProxyServerIp | read-create | current | Description. IP address of the proxy server |
| 1.3.6.1.4.1.388.6.9.2.3.1.4 | ColumnccRadiusProxyServerPort | read-create | current | Description. Port of proxy server |
| 1.3.6.1.4.1.388.6.9.2.3.1.5 | ColumnccRadiusProxyServerSharedSecret | read-create | current | Description. Shared secret between radius server and proxy server |
| 1.3.6.1.4.1.388.6.9.2.3.1.6 | ColumnccRadiusProxyServerRowStatus | read-create | current | Description. status |
| 1.3.6.1.4.1.388.6.9.3 | NodeccRadiusLdap | |||
| 1.3.6.1.4.1.388.6.9.3.1 | NodeccRadiusLdap1Server | |||
| 1.3.6.1.4.1.388.6.9.3.1.1 | ScalarccRadiusLdap1ServerIp | read-write | current | IP address of the LDAP server |
| 1.3.6.1.4.1.388.6.9.3.1.2 | ScalarccRadiusLdap1ServerPort | read-write | current | Port of the LDAP server |
| 1.3.6.1.4.1.388.6.9.3.1.3 | ScalarccRadiusLdap1LoginAttribute | read-write | current | Name of the login attribute used by LDAP for authenticating the user. |
| 1.3.6.1.4.1.388.6.9.3.1.4 | ScalarccRadiusLdap1PasswordAttribute | read-write | current | Password attribute used by LDAP for authenticating the user. The maximum length for the password is 64 chars. |
| 1.3.6.1.4.1.388.6.9.3.1.5 | ScalarccRadiusLdap1BindDistinguishedName | read-write | current | Bind DN used the LDAP client on the WS5000 to connect to a LDAP server |
| 1.3.6.1.4.1.388.6.9.3.1.6 | ScalarccRadiusLdap1BindDistinguishedPassword | read-write | current | Bind password used the LDAP client on the WS5000 to connect to a LDAP server. The maximum length for the password is 32 chars. |
| 1.3.6.1.4.1.388.6.9.3.1.7 | ScalarccRadiusLdap1BaseDistinguishedName | read-write | current | LDAP1 Distinguished Name. |
| 1.3.6.1.4.1.388.6.9.3.1.8 | ScalarccRadiusLdap1GroupAttribute | read-write | current | Name of the group attribute used by LDAP for retrieving the group associated with a user. |
| 1.3.6.1.4.1.388.6.9.3.1.9 | ScalarccRadiusLdap1GroupFilter | read-write | current | Filter specification used by the LDAP client to retrieve the groups associated with a user.The maximum of 256 characters can be in the input for GroupFilter. |
| 1.3.6.1.4.1.388.6.9.3.1.10 | ScalarccRadiusLdap1GroupMembershipAttribute | read-write | current | Name of the attribute in the user schema which specifies groups associated with the user. This is used if the group filter specified by ccRadiusGroupFilter ret… |
| 1.3.6.1.4.1.388.6.9.3.2 | NodeccRadiusLdap2Server | |||
| 1.3.6.1.4.1.388.6.9.3.2.1 | ScalarccRadiusLdap2ServerIp | read-write | current | LDAP2 is not supported at present.Hence this OID will not support any fuctionality. |
| 1.3.6.1.4.1.388.6.9.3.2.2 | ScalarccRadiusLdap2ServerPort | read-write | current | Port of the LDAP server2. LDAP2 is not supported at present.Hence this OID will not support any fuctionality. |
| 1.3.6.1.4.1.388.6.9.3.2.3 | ScalarccRadiusLdap2LoginAttribute | read-write | current | Name of the login attribute used by LDAP for authenticating the user. LDAP2 is not supported at present.Hence this OID will not support any fuctionality. |
| 1.3.6.1.4.1.388.6.9.3.2.4 | ScalarccRadiusLdap2PasswordATtribute | read-write | current | Name of the login attribute used by LDAP for authenticating the user. The maximum length for the password is 64. LDAP2 is not supported at present.Hence this O… |
| 1.3.6.1.4.1.388.6.9.3.2.5 | ScalarccRadiusLdap2BindDistinguishedName | read-write | current | Bind DN used the LDAP client on the WS5000 to connect to a LDAP server. LDAP2 is not supported at present.Hence this OID will not support any fuctionality. |
| 1.3.6.1.4.1.388.6.9.3.2.6 | ScalarccRadiusLdap2BindDistinguishedPassword | read-write | current | Bind password used the LDAP client on the WS5000 to connect to a LDAP server. The maximum length for the password is 32. LDAP2 is not supported at present.Henc… |
| 1.3.6.1.4.1.388.6.9.3.2.7 | ScalarccRadiusLdap2BaseDistinguishedName | read-write | current | LDAP2 is not supported at present.Hence this OID will not support any fuctionality. |
| 1.3.6.1.4.1.388.6.9.3.2.8 | ScalarccRadiusLdap2GroupAttribute | read-write | current | Name of the group attribute used by LDAP for retrieving the group associated with a user. LDAP2 is not supported at present.Hence this OID will not support any… |
| 1.3.6.1.4.1.388.6.9.3.2.9 | ScalarccRadiusLdap2GroupFilter | read-write | current | Filter specification used by the LDAP client to retrieve the groups associated with a user. LDAP2 is not supported at present.Hence this OID will not support a… |
| 1.3.6.1.4.1.388.6.9.3.2.10 | ScalarccRadiusLdap2GroupMembershipAttribute | read-write | current | Name of the attribute in the user schema which specifies groups associated with the user. This is used if the group filter specified by ccRadiusGroupFilter ret… |
| 1.3.6.1.4.1.388.6.9.4 | NodeccRadiusUsers | |||
| 1.3.6.1.4.1.388.6.9.4.1 | TableccRadiusGroupsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.4.1.1 | RowccRadiusGroupsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.4.1.1.1 | ColumnccRadiusGroup | read-create | current | Description. Name of the group |
| 1.3.6.1.4.1.388.6.9.4.1.1.2 | ColumnccRadiusGroupRowStatus | read-create | current | Row status shows the existence of the particular group. The valid input is 4 for Row creation and 6 for deletion of an existing row. |
| 1.3.6.1.4.1.388.6.9.4.2 | TableccRadiusUsersTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.4.2.1 | RowccRadiusUsersEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.4.2.1.1 | ColumnccRadiusUsersId | read-create | current | This OID is used to add a user. The user name can not be greater 64 characters |
| 1.3.6.1.4.1.388.6.9.4.2.1.2 | ColumnccRadiusUsersPassword | read-create | current | Set the password for the created UserID Note:User can also reset the password after the creation of the UserID. |
| 1.3.6.1.4.1.388.6.9.4.2.1.3 | ColumnccRadiusUsersGroups | read-create | current | |
| 1.3.6.1.4.1.388.6.9.4.2.1.4 | ColumnccRadiusUsersRowStatus | read-create | current | Description. |
| 1.3.6.1.4.1.388.6.9.5 | NodeccRadiusAccess | |||
| 1.3.6.1.4.1.388.6.9.5.1 | TableccRadiusAccessTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.5.1.1 | RowccRadiusAccessEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.5.1.1.1 | ColumnccRadiusAccessGroupId | read-only | current | Displays the GroupId for which coressponding WLAN mapping is being dispalyed. |
| 1.3.6.1.4.1.388.6.9.5.1.1.2 | ColumnccRadiusAccessWlanPtrs | read-write | current | |
| 1.3.6.1.4.1.388.6.9.6 | NodeccRadiusAcct | |||
| 1.3.6.1.4.1.388.6.9.6.1 | ScalarccRadiusAcctIPAddress | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.9.6.2 | ScalarccRadiusAcctPort | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.9.6.3 | ScalarccRadiusAcctTimeout | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.9.6.4 | ScalarccRadiusAcctMaxRetry | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.9.6.5 | ScalarccRadiusAcctSharedSecret | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.9.8 | NodeccRadiusTimeRestriction | |||
| 1.3.6.1.4.1.388.6.9.8.1 | TableccRadiusTimeRestrictionTable | not-accessible | current | A table for Radius Time Restrictions. |
| 1.3.6.1.4.1.388.6.9.8.1.1 | RowccRadiusTimeRestrictionEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.9.8.1.1.1 | ColumnccRadiusTimeRestrictionStart | read-write | current | Radius Time Restriction's Start time |
| 1.3.6.1.4.1.388.6.9.8.1.1.2 | ColumnccRadiusTimeRestrictionEnd | read-write | current | Radius Time Restriction's End time |
| 1.3.6.1.4.1.388.6.9.8.1.1.3 | ColumnccRadiusTimeRestrictionDays | read-write | current | Radius Time Restriction in Days. Valid values are: Sa, Su, Mo, Tu, We, Th, Fr, All, Wk(weekdays). These values are Case sensitive. |
| 1.3.6.1.4.1.388.6.10 | NodeccRap | |||
| 1.3.6.1.4.1.388.6.10.1 | NodeccRapControl | |||
| 1.3.6.1.4.1.388.6.10.1.1 | NodeccRapControlPollSymbolMus | |||
| 1.3.6.1.4.1.388.6.10.1.1.1 | ScalarccRapPollSymbolMusEnable | read-write | current | Description. Enable/disable polling MUs for their lists of known APs. The state of this variable persists across reboots. The factory-default state is disabled. |
| 1.3.6.1.4.1.388.6.10.1.1.2 | ScalarccRapPollSymbolMusInterval | read-write | current | Description. Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of… |
| 1.3.6.1.4.1.388.6.10.1.2 | NodeccRapControlOnChannel | |||
| 1.3.6.1.4.1.388.6.10.1.2.1 | ScalarccRapOnChannelEnable | read-write | current | Enable/disable polling MUs for their lists of known APs. The state of this variable persists across reboots. The factory-default state is disabled. |
| 1.3.6.1.4.1.388.6.10.1.2.2 | ScalarccRapOnChannelInterval | read-write | current | Description. Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of… |
| 1.3.6.1.4.1.388.6.10.1.3 | NodeccRapControlDetectors | |||
| 1.3.6.1.4.1.388.6.10.1.3.1 | ScalarccRapDetectorsEnable | read-write | current | Enable/disable the entire 'detector' sub-system. On the true-to-false transition, any portals previously claimed as listeners will be released and reset. Once … |
| 1.3.6.1.4.1.388.6.10.1.3.2 | ScalarccRapDetectorsInterval | read-write | current | Description. Amount of time to wait before polling the same MU for its known AP list again. Assuming the MU is disrupted for 3sec when it is polled, a value of… |
| 1.3.6.1.4.1.388.6.10.2 | NodeccRapAuth | |||
| 1.3.6.1.4.1.388.6.10.2.1 | NodeccRapAuthList | |||
| 1.3.6.1.4.1.388.6.10.2.1.1 | ScalarccRapAuthAllSymbolMac | read-write | current | Description. If TRUE, any newly-discovered AP that has a MAC address with a Symbol vendor prefix is authorized, regardless of the ESSID. |
| 1.3.6.1.4.1.388.6.10.2.1.2 | TableccRapAuthTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.10.2.1.2.1 | RowccRapAuthEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.10.2.1.2.1.1 | ColumnccRapAuthIndex | accessible-for-notify | current | Description. Index |
| 1.3.6.1.4.1.388.6.10.2.1.2.1.2 | ColumnccRapAuthMacFilter | read-write | current | Description. MAC address of AP to consider 'authorized'. To specify the entire MAC address as a wildcard, (match any MAC address), use FF:FF:FF:FF:FF:FF. (Whil… |
| 1.3.6.1.4.1.388.6.10.2.1.2.1.3 | ColumnccRapAuthEssidFilter | read-write | current | Description. ESSID of AP to consider 'authorized'. Set to 33 '*' characters for wildcard, (to match any ESSID). (ESSIDs must be 32ch or less). |
| 1.3.6.1.4.1.388.6.10.2.1.2.1.4 | ColumnccRapAuthRowExists | read-write | current | Description. A kludge to avoid RowStatus and save development time. Set this value to true when creating the row. Set this value to false to destroy the row. ?… |
| 1.3.6.1.4.1.388.6.10.2.1.3 | ScalarccRapAuthErase | read-write | current | Setting this value to TRUE erases all AuthTable entries. |
| 1.3.6.1.4.1.388.6.10.2.1.4 | ScalarccRapAuthCopyAllApproved | read-write | current | Causes all ccRapResultsApprovedTable entries to be immediately copied to the ccRapAuthTable. |
| 1.3.6.1.4.1.388.6.10.2.1.5 | ScalarccRapAuthCopyAllRogue | read-write | current | Description. |
| 1.3.6.1.4.1.388.6.10.3 | NodeccRapResults | |||
| 1.3.6.1.4.1.388.6.10.3.1 | NodeccRapResultsApproved | |||
| 1.3.6.1.4.1.388.6.10.3.1.1 | ScalarccRapResultsApprovedAgeOut | read-write | current | Description. If an entry in the _ResultsApproved table is not heard by any means for this number of minutes, is elligable to be removed from the table by the s… |
| 1.3.6.1.4.1.388.6.10.3.1.2 | TableccRapResultsApprovedTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1 | RowccRapResultsApprovedEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.1 | ColumnccRapResultsApprovedIndex | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.2 | ColumnccRapResultsApprovedApMac | read-only | current | Description. MAC address of the heard AP. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.3 | ColumnccRapResultsApprovedEssid | read-only | current | Description. ESSID of the heard AP |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.4 | ColumnccRapResultsApprovedCopyToAuthTable | read-write | current | Description. When set to TRUE, this entry is copied to the RuleTable. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.5 | ColumnccRapResultsApprovedFirstHeard | read-only | current | Description. Snapshot of sysUpTime the first time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.6 | ColumnccRapResultsApprovedLastHeard | read-only | current | Description. Snapshot of sysUpTime the most recent time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.7 | ColumnccRapResultsApprovedPortalPtr | read-only | current | Description. A mask of Portal table entries. Those Portal entries indicated by a '1' in this mask were at one time the servicing Portal for an MU that reported… |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.8 | ColumnccRapResultsApprovedHowFound | read-only | current | Description. Describes the status of this AP. ??- I don't think we would report adoptedAp on the results table, so don't need this enum value. |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.9 | ColumnccRapResultsApprovedHowAuth | read-only | current | Description. Describes how this AP was authorized, (or not). The order in which the various methods of authorizing APs is attempted is exactly the numerical or… |
| 1.3.6.1.4.1.388.6.10.3.1.2.1.10 | ColumnccRapResultsApprovedRowErase | read-write | current | Set this to 1 to erase this row. In Idle state it returns 2. |
| 1.3.6.1.4.1.388.6.10.3.1.3 | ScalarccRapResultsApprovedErase | read-write | current | Description. Setting this value to TRUE erases all Results entries. Any APs heard after that event will be treated as newly heard; (which means they will also … |
| 1.3.6.1.4.1.388.6.10.3.2 | NodeccRapResultsRogue | |||
| 1.3.6.1.4.1.388.6.10.3.2.1 | ScalarccRapResultsRogueAgeOut | read-write | current | Description. If an entry in the _ResultsRogue table is not heard by any means for this number of minutes, is elligable to be removed from the table by the swit… |
| 1.3.6.1.4.1.388.6.10.3.2.2 | TableccRapResultsRogueTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.10.3.2.2.1 | RowccRapResultsRogueEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.1 | ColumnccRapResultsRogueIndex | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.2 | ColumnccRapResultsRogueApMac | read-only | current | Description. MAC address of the heard AP |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.3 | ColumnccRapResultsRogueEssid | read-only | current | Description. ESSID of the heard AP |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.4 | ColumnccRapResultsRogueCopyToAuthTable | read-write | current | Description. When set to TRUE, this entry is copied to the RuleTable. |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.5 | ColumnccRapResultsRogueFirstHeard | read-only | current | Description. Snapshot of sysUpTime the first time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.6 | ColumnccRapResultsRogueLastHeard | read-only | current | Description. Snapshot of sysUpTime the most recent time this AP MAC/ESSID combination was heard by any Symbol MU. |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.7 | ColumnccRapResultsRoguePortalPtr | read-only | current | Description. A mask of Portal table entries. Those Portal entries indicated by a '1' in this mask were at one time the servicing Portal for an MU that reported… |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.8 | ColumnccRapResultsRogueHowFound | read-only | current | Description. Describes the status of this AP. ??- I don't think we would report adoptedAp on the results table, so don't need this enum value. |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.9 | ColumnccRapResultsRogueClosestPortalPtr | read-only | current | A pointer to closest reporting Portal to the Rogue AP, (where 'closest' is defined as greatest RSSI value among all Portals reporting this AP). |
| 1.3.6.1.4.1.388.6.10.3.2.2.1.10 | ColumnccRapResultsRogueClosestPortalRssi | read-only | current | Description. RSSI reported by the closest Portal. |
| 1.3.6.1.4.1.388.6.10.3.2.3 | ScalarccRapResultsRogueErase | read-write | current | Description. Setting this value to TRUE erases all Results entries. Any APs heard after that event will be treated as newly heard; (which means they will also … |
| 1.3.6.1.4.1.388.6.11 | NodeccImageDload | |||
| 1.3.6.1.4.1.388.6.11.1 | ScalarccRestore | read-write | current | Restore a new system image, a new configuration or a standby configuration on the switch. The syntax is : <system/config/standby>,<filename> system: Restore sy… |
| 1.3.6.1.4.1.388.6.11.2 | ScalarccFtp | read-write | current | FTP an image file, configuration file to the switch from an external server on a SET operation. The files will be transferred to the default directory in the s… |
| 1.3.6.1.4.1.388.6.11.3 | ScalarccTftp | read-write | current | Transfer files thru' tftp on a SET operation. TFTP a image file, configuration file to the switch from an external server. The files will be transferred to the… |
| 1.3.6.1.4.1.388.6.11.4 | ScalarccListFiles | read-only | current | Do a GET to list all the files present in the /image directory. |
| 1.3.6.1.4.1.388.6.11.5 | ScalarccDeleteFiles | read-write | current | A SET will delete files in the /image directory. Syntax: <filename> See ccListFiles to see a list of files in /image directory. A GET will return the status of… |
| 1.3.6.1.4.1.388.6.16 | NodeccRFStatistics | |||
| 1.3.6.1.4.1.388.6.16.1 | NodeccAp | |||
| 1.3.6.1.4.1.388.6.16.1.1 | TableccApTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.16.1.1.1 | RowccApEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.16.1.1.1.1 | ColumnccApIndex | accessible-for-notify | current | Small, arbitrary integer index |
| 1.3.6.1.4.1.388.6.16.1.1.1.2 | ColumnccApNicMac | read-only | current | MAC Address of this Access Port |
| 1.3.6.1.4.1.388.6.16.1.1.1.3 | ColumnccApModelNumber | read-only | current | Model number of Access Port |
| 1.3.6.1.4.1.388.6.16.1.1.1.4 | ColumnccApSerialNumber | read-only | current | Serial Number of this Access Port |
| 1.3.6.1.4.1.388.6.16.1.1.1.5 | ColumnccApPcbRevision | read-only | current | Revision of the printed circuit board for this Access Port |
| 1.3.6.1.4.1.388.6.16.1.1.1.6 | ColumnccApBootLoaderRev | read-only | current | Revision of the boot loader code in this Access Port. |
| 1.3.6.1.4.1.388.6.16.1.1.1.7 | ColumnccApWispVersion | read-only | current | Version of the WISP (AP-Switch) protocol implemented by this Access Port. |
| 1.3.6.1.4.1.388.6.16.1.1.1.8 | ColumnccApRuntimeFwVersion | read-only | current | Version of run-time code on this Access Port. |
| 1.3.6.1.4.1.388.6.16.1.1.1.9 | ColumnccApNumPortals | read-only | current | The number of Portals implemented on this Access Port. |
| 1.3.6.1.4.1.388.6.16.1.1.1.10 | ColumnccApPointersToPortals | read-only | current | If bit <n> of this value is set, this ApTable entry 'points' to entry <n> in the Portal Table. Such a reference conveys that the Portal entry pointed-to repres… |
| 1.3.6.1.4.1.388.6.16.2 | NodeccPortal | |||
| 1.3.6.1.4.1.388.6.16.2.1 | TableccPortalTable | not-accessible | current | This Table gives general information about the Radio. |
| 1.3.6.1.4.1.388.6.16.2.1.1 | RowccPortalEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.16.2.1.1.1 | ColumnccPortalIndex | accessible-for-notify | current | Small, arbitrary integer index. |
| 1.3.6.1.4.1.388.6.16.2.1.1.2 | ColumnccPortalPointerToAp | read-only | current | This value is the index in the ApTable for the entry representing the Access Port that contains this Radio Since each Portal has one and only one Access Port a… |
| 1.3.6.1.4.1.388.6.16.2.1.1.3 | ColumnccPortalPointersToWlans | read-only | current | (Reserved for future implementation). |
| 1.3.6.1.4.1.388.6.16.2.1.1.4 | ColumnccPortalName | read-only | current | Name of this Radio, as assigned by the Web UI or CLI. |
| 1.3.6.1.4.1.388.6.16.2.1.1.5 | ColumnccPortalLocation | read-only | current | Location string for this Radio, as assigned by the Web UI or CLI |
| 1.3.6.1.4.1.388.6.16.2.1.1.6 | ColumnccPortalOptions | read-only | current | This value describes the presence/absence of internal and/or external primary and/or secondary antennas. |
| 1.3.6.1.4.1.388.6.16.2.1.1.7 | ColumnccPortalMac | read-only | current | MAC address of the Radio. |
| 1.3.6.1.4.1.388.6.16.2.1.1.8 | ColumnccPortalNumberofEss | read-only | current | The number of ESSs implemented by this Radio |
| 1.3.6.1.4.1.388.6.16.2.1.1.9 | ColumnccPortalNumberOfBss | read-only | current | The number of BSSs implemented by this Radio |
| 1.3.6.1.4.1.388.6.16.2.1.1.10 | ColumnccPortalAssociatedMus | read-only | current | The number of MUs currently associated to this Radio |
| 1.3.6.1.4.1.388.6.16.2.1.1.11 | ColumnccPortalRadioType | read-only | current | Radio type of the Radio |
| 1.3.6.1.4.1.388.6.16.2.1.1.12 | ColumnccPortalChannel | read-only | current | The value describes the channel the Radio is currently operating on. |
| 1.3.6.1.4.1.388.6.16.2.1.1.13 | ColumnccPortalTxPowerLevel | read-only | current | Output power level for the Radio |
| 1.3.6.1.4.1.388.6.16.2.1.1.14 | ColumnccPortalLastAdoption | read-only | current | A snapshot of the WS5000's sysUpTime when this Radio was last adopted. |
| 1.3.6.1.4.1.388.6.16.2.1.1.15 | ColumnccPortalState | read-only | current | This value describes the state of the Radio A healthy Portal would power-on, and quickly advance from portalUpAndWaitingForConfig and then on to portalReceivin… |
| 1.3.6.1.4.1.388.6.16.2.1.1.16 | ColumnccPortalBackgroundNoiseNumSamples | read-only | current | Total packets received via the Radio included in all the other countries reported in this row. |
| 1.3.6.1.4.1.388.6.16.2.1.1.17 | ColumnccPortalBackgroundNoiseBest | read-only | current | The best Signal value seen from the Radio so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.6.16.2.1.1.18 | ColumnccPortalBackgroundNoiseWorst | read-only | current | The worst Signal value seen from the Radio so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.6.16.2.1.1.19 | ColumnccPortalBackgroundNoiseSum | read-only | current | A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received via this Radio. Note that this value is normally… |
| 1.3.6.1.4.1.388.6.16.2.1.1.20 | ColumnccPortalBackgroundNoiseSumSquares | read-only | current | A sum of the squares of each Signal value calculated for packets received via this Radio Unlike _SignalSum, this value is never negative, since the square of a… |
| 1.3.6.1.4.1.388.6.16.2.2 | ScalarccPortalLastMac | read-only | current | This scalar records the MAC address of the most recent Radio to be Adopted, UnAdopted, or Denied. |
| 1.3.6.1.4.1.388.6.16.2.3 | ScalarccPortalLastReason | read-only | current | This value notes the reason for the most-recent Radio UnAdoption or Denial. |
| 1.3.6.1.4.1.388.6.16.2.5 | TableccPortalSystemStatsTable | not-accessible | current | The table contains information about various management packets. Transmitted/Receieved by a Radio |
| 1.3.6.1.4.1.388.6.16.2.5.1 | RowccPortalSystemStatsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.16.2.5.1.1 | ColumnccPortalSystemStatsBeaconTx | read-only | current | The number of Beacons sent. |
| 1.3.6.1.4.1.388.6.16.2.5.1.2 | ColumnccPortalSystemStatsBeaconsTxOctets | read-only | current | The number of octets sent in Beacons. |
| 1.3.6.1.4.1.388.6.16.2.5.1.3 | ColumnccPortalSystemStatsProbeReqRx | read-only | current | The number of Probe Request packets received. |
| 1.3.6.1.4.1.388.6.16.2.5.1.4 | ColumnccPortalSystemStatsProbeReqRxOctets | read-only | current | The number of octets received in Probe Request packets. |
| 1.3.6.1.4.1.388.6.16.2.5.1.5 | ColumnccPortalSystemStatsProbeRespRetriesNone | read-only | current | The number of Probe Response packets sent with no retries. |
| 1.3.6.1.4.1.388.6.16.2.5.1.6 | ColumnccPortalSystemStatsProbeRespRetries1 | read-only | current | The number of Probe Response packets sent with exactly 1 retry |
| 1.3.6.1.4.1.388.6.16.2.5.1.7 | ColumnccPortalSystemStatsProbeRespRetries2 | read-only | current | The number of Probe Response packets sent with exactly 2 retries. |
| 1.3.6.1.4.1.388.6.16.2.5.1.8 | ColumnccPortalSystemStatsProbeRespRetries3OrMore | read-only | current | The number of Probe Response packets sent with exactly 3 retries or more retries. |
| 1.3.6.1.4.1.388.6.16.2.5.1.9 | ColumnccPortalSystemStatsProbeRespRetriesFailed | read-only | current | The number of Probe Response packets that were never successfully transmitted because the max retry count was reached. |
| 1.3.6.1.4.1.388.6.16.2.5.1.10 | ColumnccPortalSystemStatsProbeRespTxOctets | read-only | current | The number of octets successfully transmitted in Probe Response packets. (For example, the octets in a Probe Response that is transmitted twice - one retry - o… |
| 1.3.6.1.4.1.388.6.16.2.6 | NodeccPortalRfSum | |||
| 1.3.6.1.4.1.388.6.16.2.6.1 | TableccPortalStatsTable | not-accessible | current | This table describes general statistics about packets sent/recieved via each Portal on the switch. |
| 1.3.6.1.4.1.388.6.16.2.6.1.1 | RowccPortalStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.1 | ColumnccPortalTxPktsUcast | read-only | current | Count of unicast packets sent via the Radio |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.2 | ColumnccPortalRxPktsUcast | read-only | current | Count of unicast packets received via the Radio. |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.3 | ColumnccPortalRxPktsNUcast | read-only | current | Count of non-unicast (broadcast & multicast) packets received via the Radio |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.4 | ColumnccPortalTxOctetsUcast | read-only | current | Count of unicast octets sent via the Radio |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.5 | ColumnccPortalRxOctetsUcast | read-only | current | Count of unicast octets received via the Radio |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.6 | ColumnccPortalRxOctetsNUcast | read-only | current | Count of non-unicast (broadcast & multicast) octets received via the Radio |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.7 | ColumnccPortalRxUndecryptablePkts | read-only | current | Count of packets received via the Radio that could not be decrypted. |
| 1.3.6.1.4.1.388.6.16.2.6.1.1.8 | ColumnccPortalLastActivity | read-only | current | A snapshot of the switch's sysUpTime at the time of the last activity (packet sent or received) via the Radio |
| 1.3.6.1.4.1.388.6.16.2.6.2 | TableccPortalRxPktsTable | not-accessible | current | For each MU serviced by the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.6.16.2.6.2.1 | RowccPortalRxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.1 | ColumnccPortalRxPktsAt1Mb | read-only | current | Number of pkts received via this Radio at 1 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.2 | ColumnccPortalRxPktsAt2Mb | read-only | current | Number of pkts received via this Radio at 2 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.3 | ColumnccPortalRxPktsAt5pt5Mb | read-only | current | Number of pkts received via this Radio at 5.5 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.4 | ColumnccPortalRxPktsAt6Mb | read-only | current | Number of pkts received via this Radio at 6 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.5 | ColumnccPortalRxPktsAt9Mb | read-only | current | Number of pkts received via this Portal at 9 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.6 | ColumnccPortalRxPktsAt11Mb | read-only | current | Number of pkts received via this Radio at 11 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.7 | ColumnccPortalRxPktsAt12Mb | read-only | current | Number of pkts received via this Radio at 12 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.8 | ColumnccPortalRxPktsAt18Mb | read-only | current | Number of pkts received via this Radio at 18 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.9 | ColumnccPortalRxPktsAt22Mb | read-only | current | Number of pkts received via this Radio at 22 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.10 | ColumnccPortalRxPktsAt24Mb | read-only | current | Number of pkts received via this Radio at 24 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.11 | ColumnccPortalRxPktsAt36Mb | read-only | current | Number of pkts received via this Radio at 36 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.12 | ColumnccPortalRxPktsAt48Mb | read-only | current | Number of pkts received via this Radio at 48 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.2.1.13 | ColumnccPortalRxPktsAt54Mb | read-only | current | Number of pkts received via this Radio at 54 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3 | TableccPortalTxPktsTable | not-accessible | current | For each MU serviced by the switch, this table describes counts of packets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.6.16.2.6.3.1 | RowccPortalTxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.1 | ColumnccPortalTxPktsAt1Mb | read-only | current | Number of pkts transmitted via this Radio at 1 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.2 | ColumnccPortalTxPktsAt2Mb | read-only | current | Number of pkts transmitted via this Radio at 2 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.3 | ColumnccPortalTxPktsAt5pt5Mb | read-only | current | Number of pkts transmitted via this Radio at 5.5 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.4 | ColumnccPortalTxPktsAt6Mb | read-only | current | Number of pkts transmitted via this Radio at 6 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.5 | ColumnccPortalTxPktsAt9Mb | read-only | current | Number of pkts transmitted via this Radio at 9 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.6 | ColumnccPortalTxPktsAt11Mb | read-only | current | Number of pkts transmitted via this Radio at 11 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.7 | ColumnccPortalTxPktsAt12Mb | read-only | current | Number of pkts transmitted via this Radio at 12 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.8 | ColumnccPortalTxPktsAt18Mb | read-only | current | Number of pkts transmitted via this Radio at 18 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.9 | ColumnccPortalTxPktsAt22Mb | read-only | current | Number of pkts transmitted via this Radio at 22 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.10 | ColumnccPortalTxPktsAt24Mb | read-only | current | Number of pkts transmitted via this Radio at 24 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.11 | ColumnccPortalTxPktsAt36Mb | read-only | current | Number of pkts transmitted via this Radio at 36 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.12 | ColumnccPortalTxPktsAt48Mb | read-only | current | Number of pkts transmitted via this Radio at 48 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.3.1.13 | ColumnccPortalTxPktsAt54Mb | read-only | current | Number of pkts transmitted via this Radio at 54 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4 | TableccPortalRxOctetsTable | not-accessible | current | For each Portal on this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.6.16.2.6.4.1 | RowccPortalRxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.1 | ColumnccPortalRxOctetsAt1Mb | read-only | current | Number of octets received via this Radio at 1 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.2 | ColumnccPortalRxOctetsAt2Mb | read-only | current | Number of octets received via this Radio at 2 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.3 | ColumnccPortalRxOctetsAt5pt5Mb | read-only | current | Number of octets received via this Radio at 5.5 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.4 | ColumnccPortalRxOctetsAt6Mb | read-only | current | Number of octets received via this Radio at 6 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.5 | ColumnccPortalRxOctetsAt9Mb | read-only | current | Number of octets received via this Radio at 9 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.6 | ColumnccPortalRxOctetsAt11Mb | read-only | current | Number of octets received via this Radio at 11 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.7 | ColumnccPortalRxOctetsAt12Mb | read-only | current | Number of octets received via this Radio at 12 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.8 | ColumnccPortalRxOctetsAt18Mb | read-only | current | Number of octets received via this Radio at 18 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.9 | ColumnccPortalRxOctetsAt22Mb | read-only | current | Number of octets received via this Radio at 22 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.10 | ColumnccPortalRxOctetsAt24Mb | read-only | current | Number of octets received via this Radio at 24 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.11 | ColumnccPortalRxOctetsAt36Mb | read-only | current | Number of octets received via this Radio at 36 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.12 | ColumnccPortalRxOctetsAt48Mb | read-only | current | Number of octets received via this Radio at 48 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.4.1.13 | ColumnccPortalRxOctetsAt54Mb | read-only | current | Number of octets received via this Radio at 54 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5 | TableccPortalTxOctetsTable | not-accessible | current | For each Portal on this switch, this table describes counts of octets received at each possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). |
| 1.3.6.1.4.1.388.6.16.2.6.5.1 | RowccPortalTxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.1 | ColumnccPortalTxOctetsAt1Mb | read-only | current | Number octets transmitted via this Radio at 1 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.2 | ColumnccPortalTxOctetsAt2Mb | read-only | current | Number octets transmitted via this Radio at 2 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.3 | ColumnccPortalTxOctetsAt5pt5Mb | read-only | current | Number octets transmitted via this Radio at 5.5 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.4 | ColumnccPortalTxOctetsAt6Mb | read-only | current | Number octets transmitted via this Radio at 6 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.5 | ColumnccPortalTxOctetsAt9Mb | read-only | current | Number octets transmitted via this Radio at 9 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.6 | ColumnccPortalTxOctetsAt11Mb | read-only | current | Number octets transmitted via this Radio at 11 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.7 | ColumnccPortalTxOctetsAt12Mb | read-only | current | Number octets transmitted via this Radio at 12 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.8 | ColumnccPortalTxOctetsAt18Mb | read-only | current | Number octets transmitted via this Radio at 18 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.9 | ColumnccPortalTxOctetsAt22Mb | read-only | current | Number octets transmitted via this Radio at 22 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.10 | ColumnccPortalTxOctetsAt24Mb | read-only | current | Number octets transmitted via this Radio at 24 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.11 | ColumnccPortalTxOctetsAt36Mb | read-only | current | Number octets transmitted via this Radio at 36 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.12 | ColumnccPortalTxOctetsAt48Mb | read-only | current | Number octets transmitted via this Radio at 48 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.5.1.13 | ColumnccPortalTxOctetsAt54Mb | read-only | current | Number octets transmitted via this Radio at 54 Mbps. |
| 1.3.6.1.4.1.388.6.16.2.6.6 | TableccPortalTxRetriesPktsTable | not-accessible | current | For each Portal on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
| 1.3.6.1.4.1.388.6.16.2.6.6.1 | RowccPortalTxRetriesPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.1 | ColumnccPortalTxRetriesPktsNone | read-only | current | Number of pkts successfully transmitted via this Radio with no retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.2 | ColumnccPortalTxRetriesPkts01 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 1 retry. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.3 | ColumnccPortalTxRetriesPkts02 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 2 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.4 | ColumnccPortalTxRetriesPkts03 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 3 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.5 | ColumnccPortalTxRetriesPkts04 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 4 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.6 | ColumnccPortalTxRetriesPkts05 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 5 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.7 | ColumnccPortalTxRetriesPkts06 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 6 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.8 | ColumnccPortalTxRetriesPkts07 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 7 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.9 | ColumnccPortalTxRetriesPkts08 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 8 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.10 | ColumnccPortalTxRetriesPkts09 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 9 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.11 | ColumnccPortalTxRetriesPkts10 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 10 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.12 | ColumnccPortalTxRetriesPkts11 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 11 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.13 | ColumnccPortalTxRetriesPkts12 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 12 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.14 | ColumnccPortalTxRetriesPkts13 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 13 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.15 | ColumnccPortalTxRetriesPkts14 | read-only | current | Number of pkts successfully transmitted via this Radio with exactly 14 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.16 | ColumnccPortalTxRetriesPkts15 | read-only | deprecated | Number of pkts successfully transmitted via this Radio with exactly 15 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.6.1.17 | ColumnccPortalTxRetriesPktsFailed | read-only | current | Number of pkts that never were successfully transmitted to via this Portal because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.6.16.2.6.7 | TableccPortalTxRetriesOctetsTable | not-accessible | current | For each Portal on the switch, this table describes counts of the number of octets affected by transmit retries, (no retries, 1 retry, 2 retries,... gave-up). |
| 1.3.6.1.4.1.388.6.16.2.6.7.1 | RowccPortalTxRetriesOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.1 | ColumnccPortalTxRetriesOctetsNone | read-only | current | Number of octets successfully transmitted via this Radio with no retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.2 | ColumnccPortalTxRetriesOctets01 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 1 retry. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.3 | ColumnccPortalTxRetriesOctets02 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 2 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.4 | ColumnccPortalTxRetriesOctets03 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 3 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.5 | ColumnccPortalTxRetriesOctets04 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 4 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.6 | ColumnccPortalTxRetriesOctets05 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 5 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.7 | ColumnccPortalTxRetriesOctets06 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 6 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.8 | ColumnccPortalTxRetriesOctets07 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 7 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.9 | ColumnccPortalTxRetriesOctets08 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 8 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.10 | ColumnccPortalTxRetriesOctets09 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 9 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.11 | ColumnccPortalTxRetriesOctets10 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 10 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.12 | ColumnccPortalTxRetriesOctets11 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 11 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.13 | ColumnccPortalTxRetriesOctets12 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 12 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.14 | ColumnccPortalTxRetriesOctets13 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 13 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.15 | ColumnccPortalTxRetriesOctets14 | read-only | current | Number of octets successfully transmitted via this Radio with exactly 14 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.16 | ColumnccPortalTxRetriesOctets15 | read-only | deprecated | Number of octets successfully transmitted via this Radio with exactly 15 retries. |
| 1.3.6.1.4.1.388.6.16.2.6.7.1.17 | ColumnccPortalTxRetriesOctetsFailed | read-only | current | Number of octets that never were successfully transmitted to via this Portal because the max retry count was exceeded. |
| 1.3.6.1.4.1.388.6.16.2.6.8 | TableccPortalSigStatsTable | not-accessible | current | This table describes statistics about RSSI, Signal, Noise, and SNR for packets recieved via each Portal on the switch. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1 | RowccPortalSigStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.1 | ColumnccPortalSigStatsNumPkts | read-only | current | Total packets received via the Radio included in all the other counters reported in this row. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.2 | ColumnccPortalSigStatsSignalBest | read-only | current | The best Signal value seen from the Radio so far. (Remember that a -20dBm Signal is better than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.3 | ColumnccPortalSigStatsSignalWorst | read-only | current | The worst Signal value seen from the Radio so far. (Remember that a -80dBm Signal is worse than -60dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.4 | ColumnccPortalSigStatsSignalSum | read-only | current | A running sum of all Signal values calculated by the switch (using reported RSSI values), for packets received via this Radio Note that this value is normally … |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.5 | ColumnccPortalSigStatsSignalSumSquares | read-only | current | A sum of the squares of each Signal value calculated for packets received via this Radio Unlike _SignalSum, this value is never negative, since the square of a… |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.6 | ColumnccPortalSigStatsSignalMostRecent | read-only | current | The best Signal value seen from the Radio so far. (Remember that a -20dBm Signal is better than -60dBm). This value does not make sense when ccPortalSigStatsNu… |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.7 | ColumnccPortalSigStatsNoiseBest | read-only | current | The best Noise value seen from the Radio so far. (Remember that -80dBm Noise is better than -70dBm). This value is initialized to 500dBm. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.8 | ColumnccPortalSigStatsNoiseWorst | read-only | current | The worst Noise value seen from the Radio so far. (Remember that -50dBm Noise is worse than -60dBm). This value is initialized to -500dBm. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.9 | ColumnccPortalSigStatsNoiseSum | read-only | current | A running sum of all Noise values calculated by the switch (using reported RSSI values), for packets received via this Radio Like _SignalSum, this value is nor… |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.10 | ColumnccPortalSigStatsNoiseSumSquares | read-only | current | A sum of the squares of each Noise value calculated for packets received via this Radio As with _SignalSumSquares, this value is never negative. (This value ca… |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.11 | ColumnccPortalSigStatsNoiseMostRecent | read-only | current | The best Noise value seen from the Radio so far. (Remember that -80dBm Noise is better than -70dBm). This value does not make sense when ccPortalSigStatsNumPkt… |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.12 | ColumnccPortalSigStatsSnrBest | read-only | current | The best SNR value seen from the Radio so far. (Remember that +30dBm SNR is better than +20dBm). This value is initialized to -500dB. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.13 | ColumnccPortalSigStatsSnrWorst | read-only | current | The worst SNR value seen from the Radio so far. (Remember that +10dBm SNR is worse than +20dBm). This value is initialized to 500dB. |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.14 | ColumnccPortalSigStatsSnrSum | read-only | current | A running sum of all SNR values calculated by the switch (using reported RSSI values), for packets received via this Radio Unlike _Signal and _Noise, this valu… |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.15 | ColumnccPortalSigStatsSnrSumSquares | read-only | current | A sum of the squares of each SNR value calculated for packets received via this Radio This value is never negative. (This value can be used to calculate the st… |
| 1.3.6.1.4.1.388.6.16.2.6.8.1.16 | ColumnccPortalSigStatsSnrMostRecent | read-only | current | The best SNR value seen from the Radio so far. (Remember that +30dBm SNR is better than +20dBm). This value does not make sense when ccPortalSigStatsNumPkts eq… |
| 1.3.6.1.4.1.388.6.16.2.6.9 | TableccPortalSumStatsShortTable | not-accessible | current | Averages and rates calculated over the SHORT window for each Portal. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1 | RowccPortalSumStatsShortEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.1 | ColumnccPortalSumStatsShortTimestamp | read-only | current | Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.2 | ColumnccPortalSumStatsShortNumPkts | read-only | current | The number of packets used to calculate the statistics in this window. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.3 | ColumnccPortalSumStatsShortPktsPerSec100 | read-only | current | Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).… |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.4 | ColumnccPortalSumStatsShortPktsPerSecTx100 | read-only | current | Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not c… |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.5 | ColumnccPortalSumStatsShortPktsPerSecRx100 | read-only | current | Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.6 | ColumnccPortalSumStatsShortThroughput | read-only | current | Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent … |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.7 | ColumnccPortalSumStatsShortThroughputTx | read-only | current | Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the numb… |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.8 | ColumnccPortalSumStatsShortThroughputRx | read-only | current | Actual number of bits RX over the window, divided by the number of seconds in the window. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.9 | ColumnccPortalSumStatsShortAvgBitSpeed | read-only | current | An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divi… |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.10 | ColumnccPortalSumStatsShortAvgMuSignal | read-only | current | The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.11 | ColumnccPortalSumStatsShortAvgMuNoise | read-only | current | The average of all noise values over the window. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.12 | ColumnccPortalSumStatsShortAvgMuSnr | read-only | current | The average of all SNR values over the window. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.13 | ColumnccPortalSumStatsShortPp10kNUcastPkts | read-only | current | Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.14 | ColumnccPortalSumStatsShortPp10kTxWithRetries | read-only | current | Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.15 | ColumnccPortalSumStatsShortPp10kTxMaxRetries | read-only | current | Ratio of TX packets that were dropped due to excessive. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.16 | ColumnccPortalSumStatsShortTxAvgRetries100 | read-only | current | For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max … |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.17 | ColumnccPortalSumStatsShortPp10kRxUndecrypt | read-only | current | Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.18 | ColumnccPortalSumStatsShortTotalMus | read-only | current | The total number of MUs associated to the given Radio |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.19 | ColumnccPortalSumStatsShortPp10kRfUtil | read-only | current | The approximate utilization of the Portal's RF port. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.9.1.20 | ColumnccPortalSumStatsShortPp10kDropped | read-only | current | Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packet… |
| 1.3.6.1.4.1.388.6.16.2.6.10 | TableccPortalSumStatsLongTable | not-accessible | current | Averages and rates calculated over the LONG window for each Portal. (Refer to ccPortalSumStatsShortTable for descriptions). |
| 1.3.6.1.4.1.388.6.16.2.6.10.1 | RowccPortalSumStatsLongEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.1 | ColumnccPortalSumStatsLongTimestamp | read-only | current | Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.2 | ColumnccPortalSumStatsLongNumPkts | read-only | current | The number of packets used to calculate the statistics in this window |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.3 | ColumnccPortalSumStatsLongPktsPerSec100 | read-only | current | Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).… |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.4 | ColumnccPortalSumStatsLongPktsPerSecTx100 | read-only | current | Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not c… |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.5 | ColumnccPortalSumStatsLongPktsPerSecRx100 | read-only | current | Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.6 | ColumnccPortalSumStatsLongThroughput | read-only | current | Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent … |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.7 | ColumnccPortalSumStatsLongThroughputTx | read-only | current | Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the numb… |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.8 | ColumnccPortalSumStatsLongThroughputRx | read-only | current | Actual number of bits RX over the window, divided by the number of seconds in the window. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.9 | ColumnccPortalSumStatsLongAvgBitSpeed | read-only | current | An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divi… |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.10 | ColumnccPortalSumStatsLongAvgMuSignal | read-only | current | The average of all signal values over the window. NOTE: dBm are normally negative. Here the NEGATIVE values are reported as POSITIVE values. PO |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.11 | ColumnccPortalSumStatsLongAvgMuNoise | read-only | current | The average of all noise values over the window. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.12 | ColumnccPortalSumStatsLongAvgMuSnr | read-only | current | The average of all SNR values over the window. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.13 | ColumnccPortalSumStatsLongPp10kNUcastPkts | read-only | current | Ratio of packets that were NOT unicast. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.14 | ColumnccPortalSumStatsLongPp10kTxWithRetries | read-only | current | Ratio of TX packets that experienced one or more retries. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.15 | ColumnccPortalSumStatsLongPp10kTxMaxRetries | read-only | current | Ratio of TX packets that were dropped due to excessive. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.16 | ColumnccPortalSumStatsLongTxAvgRetries100 | read-only | current | For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max … |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.17 | ColumnccPortalSumStatsLongPp10kRxUndecrypt | read-only | current | Ratio of RX packets that were undecryptable. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.18 | ColumnccPortalSumStatsLongTotalMus | read-only | current | The total number of MUs associated to the given Radio |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.19 | ColumnccPortalSumStatsLongPp10kRfUtil | read-only | current | The approximate utilization of the Portal's RF port. Calculated as Throughput divided by AvgBitSpeed. Expressed as parts-per-10000. |
| 1.3.6.1.4.1.388.6.16.2.6.10.1.20 | ColumnccPortalSumStatsLongPp10kDropped | read-only | current | Packets dropped divided by packets sent. Dropped here means dropped intentionally due to the appropriate QoS queue being full. Other reasons for dropped packet… |
| 1.3.6.1.4.1.388.6.16.3 | NodeccMus | |||
| 1.3.6.1.4.1.388.6.16.3.1 | TableccMuInfoTable | not-accessible | current | This table describes general information about each MU serviced by the switch. |
| 1.3.6.1.4.1.388.6.16.3.1.1 | RowccMuInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.1.1.1 | ColumnccMuMac | accessible-for-notify | current | MAC address of the MU. |
| 1.3.6.1.4.1.388.6.16.3.1.1.2 | ColumnccMuWlanIndex | read-only | current | (Reserved for future implementation). |
| 1.3.6.1.4.1.388.6.16.3.1.1.3 | ColumnccMuWlanName | read-only | current | The name of the WLAN this MU is associated to. |
| 1.3.6.1.4.1.388.6.16.3.1.1.4 | ColumnccMuIsDataReady | read-only | current | This value is true if the WS5000 is ready to forward/switch packets to/from this MU, (internally called the 'data ready' state). Otherwise this value is false. |
| 1.3.6.1.4.1.388.6.16.3.1.1.5 | ColumnccMuPortalIndex | read-only | current | The index of the entry in the PortalTable to which this MU is associated. |
| 1.3.6.1.4.1.388.6.16.3.1.1.6 | ColumnccMuPortalMac | read-only | current | The MAC address of the Portal to which this MU is associated. |
| 1.3.6.1.4.1.388.6.16.3.1.1.7 | ColumnccMuSymbolRogueApEna | read-only | current | If true, this MU supports Symbol's Rogue AP detection assist algorithm. |
| 1.3.6.1.4.1.388.6.16.3.1.1.8 | ColumnccMuIpAddr | read-only | current | IP address of the MU. |
| 1.3.6.1.4.1.388.6.16.3.1.1.9 | ColumnccMuType | read-only | current | Type of the MU. |
| 1.3.6.1.4.1.388.6.16.3.1.1.10 | ColumnccMuRadioType | read-only | current | Radio type of the MU. |
| 1.3.6.1.4.1.388.6.16.3.1.1.11 | ColumnccMuSupportedRates | read-only | current | A bit-mask of rates supported by this MU. |
| 1.3.6.1.4.1.388.6.16.3.1.1.12 | ColumnccMuPowerMode | read-only | current | Power-mode implemented by the MU. A MU's status will constantly switch between PSP and CAM mode when it is in PSP mode. |
| 1.3.6.1.4.1.388.6.16.3.1.1.13 | ColumnccMuAuthenticationMethod | read-only | current | Authentication method implemented by the MU. |
| 1.3.6.1.4.1.388.6.16.3.1.1.14 | ColumnccMuEncryptionMethod | read-only | current | Encryption method implemented by the MU. |
| 1.3.6.1.4.1.388.6.16.3.1.1.15 | ColumnccMuVlanId | read-only | current | The VLAN that this MU is assigned to. |
| 1.3.6.1.4.1.388.6.16.3.2 | TableccMuStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.2.1 | RowccMuStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.2.1.1 | ColumnccMuTxPktsUcast | read-only | current | The number of Unicast packets transmitted to the MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.2 | ColumnccMuRxPktsUcast | read-only | current | The number of Unicast packets received from the MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.3 | ColumnccMuRxPktsNUcast | read-only | current | The number of Non unicast packets received from a MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.4 | ColumnccMuTxOctetsUcast | read-only | current | The number of unicast bytes transmitted to the MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.5 | ColumnccMuRxOctetsUcast | read-only | current | The number of unicast bytes received from an MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.6 | ColumnccMuRxOctetsNUcast | read-only | current | The number of Non Unicast Bytes received from an MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.7 | ColumnccMuRxUndecryptablePkts | read-only | current | The number of undecryptable packets received from an MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.8 | ColumnccMuRxRssiNumPkts | read-only | current | The number of packets received from an MU for which all the signal related claculations in this table are done |
| 1.3.6.1.4.1.388.6.16.3.2.1.9 | ColumnccMuRxRssiSum | read-only | current | The sum of Signal strength values of all the packets received from this MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.10 | ColumnccMuRxRssiSumSquares | read-only | current | The sumsq of Signal strength of all the packets received from this MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.11 | ColumnccMuRxRssiMostRecent | read-only | current | The most recent value of the signal strength received from this MU |
| 1.3.6.1.4.1.388.6.16.3.2.1.12 | ColumnccMuLastActivity | read-only | current | The time stamp at which the last activity was seen fromn this MU |
| 1.3.6.1.4.1.388.6.16.3.3 | TableccMuRxPktsTable | not-accessible | current | The Number of Packets received at various rates from the Moblie Unit |
| 1.3.6.1.4.1.388.6.16.3.3.1 | RowccMuRxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.3.1.1 | ColumnccMuRxPktsAt1Mb | read-only | current | The number of packets received from the Mobile Unit at 1 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.2 | ColumnccMuRxPktsAt2Mb | read-only | current | The number of packets received from the Mobile Unit at 2 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.3 | ColumnccMuRxPktsAt5pt5Mb | read-only | current | The number of packets received from the Mobile Unit at 5.5 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.4 | ColumnccMuRxPktsAt6Mb | read-only | current | The number of packets received from the Mobile Unit at 6 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.5 | ColumnccMuRxPktsAt9Mb | read-only | current | The number of packets received from the Mobile Unit at 9 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.6 | ColumnccMuRxPktsAt11Mb | read-only | current | The number of packets received from the Mobile Unit at 11 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.7 | ColumnccMuRxPktsAt12Mb | read-only | current | The number of packets received from the Mobile Unit at 12 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.8 | ColumnccMuRxPktsAt18Mb | read-only | current | The number of packets received from the Mobile Unit at 18 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.9 | ColumnccMuRxPktsAt22Mb | read-only | current | The number of packets received from the Mobile Unit at 22 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.10 | ColumnccMuRxPktsAt24Mb | read-only | current | The number of packets received from the Mobile Unit at 24 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.11 | ColumnccMuRxPktsAt36Mb | read-only | current | The number of packets received from the Mobile Unit at 36 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.12 | ColumnccMuRxPktsAt48Mb | read-only | current | The number of packets received from the Mobile Unit at 48 Mbps |
| 1.3.6.1.4.1.388.6.16.3.3.1.13 | ColumnccMuRxPktsAt54Mb | read-only | current | The number of packets received from the Mobile Unit at 54 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4 | TableccMuTxPktsTable | not-accessible | current | The Number of Packets transmitted to the Moblie Unit at various rates |
| 1.3.6.1.4.1.388.6.16.3.4.1 | RowccMuTxPktsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.4.1.1 | ColumnccMuTxPktsAt1Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 1 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.2 | ColumnccMuTxPktsAt2Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 2 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.3 | ColumnccMuTxPktsAt5pt5Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 5.5 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.4 | ColumnccMuTxPktsAt6Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 6 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.5 | ColumnccMuTxPktsAt9Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 9 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.6 | ColumnccMuTxPktsAt11Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 11 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.7 | ColumnccMuTxPktsAt12Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 12 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.8 | ColumnccMuTxPktsAt18Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 18 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.9 | ColumnccMuTxPktsAt22Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 22 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.10 | ColumnccMuTxPktsAt24Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 24 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.11 | ColumnccMuTxPktsAt36Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 36 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.12 | ColumnccMuTxPktsAt48Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 48 Mbps |
| 1.3.6.1.4.1.388.6.16.3.4.1.13 | ColumnccMuTxPktsAt54Mb | read-only | current | The number of packets transmitted to the Mobile Unit at 54 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5 | TableccMuRxOctetsTable | not-accessible | current | The number of Bytes received from the mU at various rates |
| 1.3.6.1.4.1.388.6.16.3.5.1 | RowccMuRxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.5.1.1 | ColumnccMuRxOctetsAt1Mb | read-only | current | The number of bytes received from the Mobile Unit at 1 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.2 | ColumnccMuRxOctetsAt2Mb | read-only | current | The number of bytes received from the Mobile Unit at 2 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.3 | ColumnccMuRxOctetsAt5pt5Mb | read-only | current | The number of bytes received from the Mobile Unit at 5.5 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.4 | ColumnccMuRxOctetsAt6Mb | read-only | current | The number of bytes received from the Mobile Unit at 6 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.5 | ColumnccMuRxOctetsAt9Mb | read-only | current | The number of bytes received from the Mobile Unit at 9 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.6 | ColumnccMuRxOctetsAt11Mb | read-only | current | The number of bytes received from the Mobile Unit at 11 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.7 | ColumnccMuRxOctetsAt12Mb | read-only | current | The number of bytes received from the Mobile Unit at 12 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.8 | ColumnccMuRxOctetsAt18Mb | read-only | current | The number of bytes received from the Mobile Unit at 18 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.9 | ColumnccMuRxOctetsAt22Mb | read-only | current | The number of bytes received from the Mobile Unit at 22 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.10 | ColumnccMuRxOctetsAt24Mb | read-only | current | The number of bytes received from the Mobile Unit at 24 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.11 | ColumnccMuRxOctetsAt36Mb | read-only | current | The number of bytes received from the Mobile Unit at 36 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.12 | ColumnccMuRxOctetsAt48Mb | read-only | current | The number of bytes received from the Mobile Unit at 48 Mbps |
| 1.3.6.1.4.1.388.6.16.3.5.1.13 | ColumnccMuRxOctetsAt54Mb | read-only | current | The number of bytes received from the Mobile Unit at 54 Mbps |
| 1.3.6.1.4.1.388.6.16.3.6 | TableccMuTxOctetsTable | not-accessible | current | The number of bytes transmitted to the MU at various rate |
| 1.3.6.1.4.1.388.6.16.3.6.1 | RowccMuTxOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.6.1.1 | ColumnccMuTxOctetsAt1Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 1 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.2 | ColumnccMuTxOctetsAt2Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 2 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.3 | ColumnccMuTxOctetsAt5pt5Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 5.5 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.4 | ColumnccMuTxOctetsAt6Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 6 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.5 | ColumnccMuTxOctetsAt9Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 9 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.6 | ColumnccMuTxOctetsAt11Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 11 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.7 | ColumnccMuTxOctetsAt12Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 12 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.8 | ColumnccMuTxOctetsAt18Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 18 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.9 | ColumnccMuTxOctetsAt22Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 22 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.10 | ColumnccMuTxOctetsAt24Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 24 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.11 | ColumnccMuTxOctetsAt36Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 36 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.12 | ColumnccMuTxOctetsAt48Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 48 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.6.1.13 | ColumnccMuTxOctetsAt54Mb | read-only | current | The number of bytes transmitted to the Mobile Unit at 54 Mbps (does not include re-tries) |
| 1.3.6.1.4.1.388.6.16.3.7 | TableccMuTxRetriesTable | not-accessible | current | The number of packets transmitted to the MU at various retries |
| 1.3.6.1.4.1.388.6.16.3.7.1 | RowccMuTxRetriesEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.7.1.1 | ColumnccMuTxRetriesNone | read-only | current | The number of bytes transmitted to the Mobile Unit with no retry |
| 1.3.6.1.4.1.388.6.16.3.7.1.2 | ColumnccMuTxRetries01 | read-only | current | The number of bytes transmitted to the Mobile Unit with 1 retry |
| 1.3.6.1.4.1.388.6.16.3.7.1.3 | ColumnccMuTxRetries02 | read-only | current | The number of bytes transmitted to the Mobile Unit with 2 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.4 | ColumnccMuTxRetries03 | read-only | current | The number of bytes transmitted to the Mobile Unit with 3 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.5 | ColumnccMuTxRetries04 | read-only | current | The number of bytes transmitted to the Mobile Unit with 4 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.6 | ColumnccMuTxRetries05 | read-only | current | The number of bytes transmitted to the Mobile Unit with 5 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.7 | ColumnccMuTxRetries06 | read-only | current | The number of bytes transmitted to the Mobile Unit with 6 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.8 | ColumnccMuTxRetries07 | read-only | current | The number of bytes transmitted to the Mobile Unit with 7 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.9 | ColumnccMuTxRetries08 | read-only | current | The number of bytes transmitted to the Mobile Unit with 8 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.10 | ColumnccMuTxRetries09 | read-only | current | The number of bytes transmitted to the Mobile Unit with 9 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.11 | ColumnccMuTxRetries10 | read-only | current | The number of bytes transmitted to the Mobile Unit with 10 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.12 | ColumnccMuTxRetries11 | read-only | current | The number of bytes transmitted to the Mobile Unit with 11 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.13 | ColumnccMuTxRetries12 | read-only | current | The number of bytes transmitted to the Mobile Unit with 12 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.14 | ColumnccMuTxRetries13 | read-only | current | The number of bytes transmitted to the Mobile Unit with 13 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.15 | ColumnccMuTxRetries14 | read-only | current | The number of bytes transmitted to the Mobile Unit with 14 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.16 | ColumnccMuTxRetries15 | read-only | deprecated | The number of bytes transmitted to the Mobile Unit with 15 retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.17 | ColumnccMuTxRetriesFailed | read-only | current | The number of bytes that were not sent due to excess retries |
| 1.3.6.1.4.1.388.6.16.3.7.1.18 | ColumnccMuTxRetriesTotal | read-only | current | A total sum of all retries across all packets sent to this MU. For example, if 4 packets have been sent, with the following number of retires: 2, 0, 5, gave-up… |
| 1.3.6.1.4.1.388.6.16.3.7.1.19 | ColumnccMuTxRetriesMostRecent | read-only | current | The number of retries of the most recent transmission |
| 1.3.6.1.4.1.388.6.16.3.8 | ScalarccMuLastMac | read-only | current | This scalar records the MAC address of the most recent MU to be Adopted, UnAdopted, or Denied. |
| 1.3.6.1.4.1.388.6.16.3.9 | ScalarccMuLastReason | read-only | current | This value notes the reason for the most-recent MU UnAdoption or Denial. Enum item associationFailed indicates that a key association field was missing, or a m… |
| 1.3.6.1.4.1.388.6.16.3.10 | ScalarccMuLastPortal | read-only | current | This value notes the reason for the most-recent MU UnAdoption or Denial. |
| 1.3.6.1.4.1.388.6.16.3.100 | NodeccMuRfSum | |||
| 1.3.6.1.4.1.388.6.16.3.100.1 | TableccMuTxRetriesOctetsTable | not-accessible | current | The number of packets transmitted from the MU at various retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1 | RowccMuTxRetriesOctetsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.1 | ColumnccMuTxRetriesOctetsNone | read-only | current | The number of packets transmitted to the Mobile Unit with no retry |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.2 | ColumnccMuTxRetriesOctets01 | read-only | current | The number of packets transmitted to the Mobile Unit with 1 retry |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.3 | ColumnccMuTxRetriesOctets02 | read-only | current | The number of packets transmitted to the Mobile Unit with 2 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.4 | ColumnccMuTxRetriesOctets03 | read-only | current | The number of packets transmitted to the Mobile Unit with 3 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.5 | ColumnccMuTxRetriesOctets04 | read-only | current | The number of packets transmitted to the Mobile Unit with 4 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.6 | ColumnccMuTxRetriesOctets05 | read-only | current | The number of packets transmitted to the Mobile Unit with 5 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.7 | ColumnccMuTxRetriesOctets06 | read-only | current | The number of packets transmitted to the Mobile Unit with 6 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.8 | ColumnccMuTxRetriesOctets07 | read-only | current | The number of packets transmitted to the Mobile Unit with 7 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.9 | ColumnccMuTxRetriesOctets08 | read-only | current | The number of packets transmitted to the Mobile Unit with 8 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.10 | ColumnccMuTxRetriesOctets09 | read-only | current | The number of packets transmitted to the Mobile Unit with 9 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.11 | ColumnccMuTxRetriesOctets10 | read-only | current | The number of packets transmitted to the Mobile Unit with 10 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.12 | ColumnccMuTxRetriesOctets11 | read-only | current | The number of packets transmitted to the Mobile Unit with 11 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.13 | ColumnccMuTxRetriesOctets12 | read-only | current | The number of packets transmitted to the Mobile Unit with 12 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.14 | ColumnccMuTxRetriesOctets13 | read-only | current | The number of packets transmitted to the Mobile Unit with 13 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.15 | ColumnccMuTxRetriesOctets14 | read-only | current | The number of packets transmitted to the Mobile Unit with 14 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.16 | ColumnccMuTxRetriesOctets15 | read-only | deprecated | The number of packets transmitted to the Mobile Unit with 15 retries |
| 1.3.6.1.4.1.388.6.16.3.100.1.1.17 | ColumnccMuTxRetriesOctetsFailed | read-only | current | The number of packets that were not sent due to excess retries |
| 1.3.6.1.4.1.388.6.16.3.100.2 | TableccMuSigStatsTable | not-accessible | current | The various signal strength information for this MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1 | RowccMuSigStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.1 | ColumnccMuSigStatsNumPkts | read-only | current | The Number of Packets from the MU fro which the signal strength calculations shown in this table are done |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.2 | ColumnccMuSigStatsSignalBest | read-only | current | The best value of the signal strength in Dbm |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.3 | ColumnccMuSigStatsSignalWorst | read-only | current | The worst value of signal strength in dBm |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.4 | ColumnccMuSigStatsSignalSum | read-only | current | The sum of signal strength of all the packets received from the MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.5 | ColumnccMuSigStatsSignalSumSquares | read-only | current | The sum square of all the packets received from the MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.6 | ColumnccMuSigStatsSignalMostRecent | read-only | current | The most recent signal strength value received from the MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.7 | ColumnccMuSigStatsNoiseBest | read-only | current | The best noise value heard by the Radio to which this MU is associated. Here Best value of Noise implies the the least noise value. |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.8 | ColumnccMuSigStatsNoiseWorst | read-only | current | The worst value of the noise strength as received by the radio to which the MU is associated |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.9 | ColumnccMuSigStatsNoiseSum | read-only | current | The sum of all noise samples received from the Radio t which the MU is associsated |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.10 | ColumnccMuSigStatsNoiseSumSquares | read-only | current | The sumsq of all the noise samples received from the radio to which this MU is associated |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.11 | ColumnccMuSigStatsNoiseMostRecent | read-only | current | The strength of the most recent noise value heard from the radio to which this MU is associated |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.12 | ColumnccMuSigStatsSnrBest | read-only | current | The best value of snr calculated for this MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.13 | ColumnccMuSigStatsSnrWorst | read-only | current | The worst value of snr calculated for this MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.14 | ColumnccMuSigStatsSnrSum | read-only | current | The sum of all the SNR values calculated for this MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.15 | ColumnccMuSigStatsSnrSumSquares | read-only | current | The sum squqre of all the SNR values calculated for this MU |
| 1.3.6.1.4.1.388.6.16.3.100.2.1.16 | ColumnccMuSigStatsSnrMostRecent | read-only | current | The most recent value of the SNR calculated for this MU |
| 1.3.6.1.4.1.388.6.16.3.100.3 | TableccMuSumStatsShortTable | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.100.3.1 | RowccMuSumStatsShortEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.1 | ColumnccMuSumStatsShortTimestamp | read-only | current | Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.2 | ColumnccMuSumStatsShortNumPkts | read-only | current | The number of packets used to calculate the statistics in this window |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.3 | ColumnccMuSumStatsShortPktsPerSec100 | read-only | current | Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).… |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.4 | ColumnccMuSumStatsShortPktsPerSecTx100 | read-only | current | Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not c… |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.5 | ColumnccMuSumStatsShortPktsPerSecRx100 | read-only | current | Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100 |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.6 | ColumnccMuSumStatsShortThroughput | read-only | current | Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent … |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.7 | ColumnccMuSumStatsShortThroughputTx | read-only | current | Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the numb… |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.8 | ColumnccMuSumStatsShortThroughputRx | read-only | current | Actual number of bits RX over the window, divided by the number of seconds in the window |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.9 | ColumnccMuSumStatsShortAvgBitSpeed | read-only | current | An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divi… |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.10 | ColumnccMuSumStatsShortAvgMuSignal | read-only | current | The average of all signal values over the window. NOTE: dBm are normally negative. |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.11 | ColumnccMuSumStatsShortAvgMuNoise | read-only | current | The average of all noise values over the window |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.12 | ColumnccMuSumStatsShortAvgMuSnr | read-only | current | The average of all SNR values over the window |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.13 | ColumnccMuSumStatsShortPp10kNUcastPkts | read-only | current | Ratio of packets that were NOT unicast to the total number of packets sent/received. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.14 | ColumnccMuSumStatsShortPp10kTxWithRetries | read-only | current | Ratio of TX packets that experienced one or more retries to the total number of packets sent or received. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.15 | ColumnccMuSumStatsShortPp10kDropped | read-only | current | Ratio of TX packets that were dropped due to excessive retries. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.16 | ColumnccMuSumStatsShortTxAvgRetries100 | read-only | current | For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max … |
| 1.3.6.1.4.1.388.6.16.3.100.3.1.17 | ColumnccMuSumStatsShortPp10kRxUndecrypt | read-only | current | Ratio of RX packets that were undecryptable to the total number of packets received. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.16.3.100.4 | TableccMuSumStatsLongTable | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.100.4.1 | RowccMuSumStatsLongEntry | not-accessible | current | |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.1 | ColumnccMuSumStatsLongTimestamp | read-only | current | Snapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents. |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.2 | ColumnccMuSumStatsLongNumPkts | read-only | current | The number of packets used to calculate the statistics in this window |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.3 | ColumnccMuSumStatsLongPktsPerSec100 | read-only | current | Packets per second as averaged over the 'window'. For transmitted packets, each packet sucessfully sent counts as 1, (not N, where N is the number of retries).… |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.4 | ColumnccMuSumStatsLongPktsPerSecTx100 | read-only | current | Packets per second TX as averaged over the 'window'. Each packet sucessfully sent counts as 1, (not N, where N is the number of retries). Since SNMP does not c… |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.5 | ColumnccMuSumStatsLongPktsPerSecRx100 | read-only | current | Packets per second RX as averaged over the 'window'. Since SNMP does not convey decimal values, the result is multiplied by 100 |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.6 | ColumnccMuSumStatsLongThroughput | read-only | current | Actual number of bits sent and received over the window, divided by the number of seconds in the window. For transmitted packets, each packet sucessfully sent … |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.7 | ColumnccMuSumStatsLongThroughputTx | read-only | current | Actual number of bits TX over the window, divided by the number of seconds in the window. Each packet sucessfully sent counts as 1, (not N, where N is the numb… |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.8 | ColumnccMuSumStatsLongThroughputRx | read-only | current | Actual number of bits RX over the window, divided by the number of seconds in the window |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.9 | ColumnccMuSumStatsLongAvgBitSpeed | read-only | current | An octet-weighted average of the speeds of all packets sent/received. (For each possible speed, multiply the number of octets sent/received by that speed; divi… |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.10 | ColumnccMuSumStatsLongAvgMuSignal | read-only | current | The average of all signal values over the window. NOTE: dBm are normally negative. |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.11 | ColumnccMuSumStatsLongAvgMuNoise | read-only | current | The average of all noise values over the window |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.12 | ColumnccMuSumStatsLongAvgMuSnr | read-only | current | The average of all SNR values over the window |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.13 | ColumnccMuSumStatsLongPp10kNUcastPkts | read-only | current | Ratio of packets that were NOT unicast to the total number of packets sent/received. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.14 | ColumnccMuSumStatsLongPp10kTxWithRetries | read-only | current | Ratio of TX packets that experienced one or more retries to the total number of packets sent or received. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.15 | ColumnccMuSumStatsLongPp10kDropped | read-only | current | Ratio of TX packets that were dropped due to excessive retries. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.16 | ColumnccMuSumStatsLongTxAvgRetries100 | read-only | current | For all transmit packets (those that experienced some retries, those that were successfully transmitted with only 1 transmission, and those that attempted max … |
| 1.3.6.1.4.1.388.6.16.3.100.4.1.17 | ColumnccMuSumStatsLongPp10kRxUndecrypt | read-only | current | Ratio of RX packets that were undecryptable to the total number of packets received. Expressed as parts-per-10000 |
| 1.3.6.1.4.1.388.6.18 | NodeccWME | |||
| 1.3.6.1.4.1.388.6.18.5 | TableccWMEprofileTable | not-accessible | current | Description. Table for WME Profiles. |
| 1.3.6.1.4.1.388.6.18.5.1 | RowccWMEprofileEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.18.5.1.1 | ColumnccWMEprofileIndex | accessible-for-notify | current | Description. Simple Index 1...10 |
| 1.3.6.1.4.1.388.6.18.5.1.2 | ColumnccWMEprofilename | read-create | current | Description. WME Profile Name. |
| 1.3.6.1.4.1.388.6.18.5.1.3 | ColumnccWMEprofileDesc | read-create | current | Description. |
| 1.3.6.1.4.1.388.6.18.5.1.4 | ColumnccWMEprofileAc1VoEcwmin | read-create | current | Description. WME Voice Access Category CWMin value. |
| 1.3.6.1.4.1.388.6.18.5.1.5 | ColumnccWMEprofileAc1VoEcwmax | read-create | current | Description. WME Voice Access Category CWMax value. |
| 1.3.6.1.4.1.388.6.18.5.1.6 | ColumnccWMEprofileAc1VoTxopLimit | read-create | current | Description. WME Voice Access Category Txopstime value.(B) |
| 1.3.6.1.4.1.388.6.18.5.1.7 | ColumnccWMEprofileAc1VoAgTxopLimit | read-create | current | Description. WME Voice Access Category Txopstime value.(A/G) |
| 1.3.6.1.4.1.388.6.18.5.1.8 | ColumnccWMEprofileAc1VoAifsn | read-create | current | Description. WME Voice Access Category Aifsn value. |
| 1.3.6.1.4.1.388.6.18.5.1.9 | ColumnccWMEprofileAc2ViEcwmin | read-create | current | Description. WME Video Access Category CWMin value. |
| 1.3.6.1.4.1.388.6.18.5.1.10 | ColumnccWMEprofileAc2ViEcwmax | read-create | current | Description. WME Video Access Category CWMax value. |
| 1.3.6.1.4.1.388.6.18.5.1.11 | ColumnccWMEprofileAc2ViTxopLimit | read-create | current | Description. WME Video Access Category Txopstime value.(B) |
| 1.3.6.1.4.1.388.6.18.5.1.12 | ColumnccWMEprofileAc2ViAgTxopLimit | read-create | current | Description. WME Video Access Category Txopstime value.(A/G) |
| 1.3.6.1.4.1.388.6.18.5.1.13 | ColumnccWMEprofileAc2ViAifsn | read-create | current | Description. WME Video Access Category Aifsn value. |
| 1.3.6.1.4.1.388.6.18.5.1.14 | ColumnccWMEprofileAc3BeEcwmin | read-create | current | Description. WME Best Effort Access Category CWMin value |
| 1.3.6.1.4.1.388.6.18.5.1.15 | ColumnccWMEprofileAc3BeEcwmax | read-create | current | Description. WME Best Effort Access Category CWMax value. |
| 1.3.6.1.4.1.388.6.18.5.1.16 | ColumnccWMEprofileAc3BeTxopLimit | read-create | current | Description. WME Best Effort Access Category Txopstime value. (B) |
| 1.3.6.1.4.1.388.6.18.5.1.17 | ColumnccWMEprofileAc3BeAgTxopLimit | read-create | current | Description. WME Best Effort Access Category Txopstime value.(A/G) |
| 1.3.6.1.4.1.388.6.18.5.1.18 | ColumnccWMEprofileAc3BeAifsn | read-create | current | Description. WME Best Effort Access Category Aifsn value. |
| 1.3.6.1.4.1.388.6.18.5.1.19 | ColumnccWMEprofileAc4BkEcwmin | read-create | current | Description. WME Background Access Category CWMin value. |
| 1.3.6.1.4.1.388.6.18.5.1.20 | ColumnccWMEprofileAc4BkEcwmax | read-create | current | Description. WME Background Access Category CWMax value. |
| 1.3.6.1.4.1.388.6.18.5.1.21 | ColumnccWMEprofileAc4BkTxopLimit | read-create | current | Description. WME Background Access Category Txopstime value.(B) |
| 1.3.6.1.4.1.388.6.18.5.1.22 | ColumnccWMEprofileAc4BkAgTxopLimit | read-create | current | Description. WME Background Access Category Txopstime value.(A/G) |
| 1.3.6.1.4.1.388.6.18.5.1.23 | ColumnccWMEprofileAc4BkAifsn | read-create | current | Description. WME Background Access Category Aifsn value. |
| 1.3.6.1.4.1.388.6.18.5.1.24 | ColumnccWMEprofileQosParam | read-create | current | Description. WME profile QosParam This is Read Only. |
| 1.3.6.1.4.1.388.6.18.5.1.25 | ColumnccWMEprofileRowStatus | read-create | current | Description. Used for row creation/deletion. |
| 1.3.6.1.4.1.388.6.19 | NodeccPortalBeacon | |||
| 1.3.6.1.4.1.388.6.19.5 | TableccPortalBeaconRptTable | not-accessible | current | Description. This table describes the signal values (in dBm) of beacons heard from other Portals Note that the 'neighbor' Portals reported may not be the geogr… |
| 1.3.6.1.4.1.388.6.19.5.1 | RowccPortalBeaconRptEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.19.5.1.1 | ColumnccPortalBeaconRptPortalIndex | accessible-for-notify | current | Description. The ccPortalTable:ccPortalIndex of the neighbor Portal that has been heard. |
| 1.3.6.1.4.1.388.6.19.5.1.2 | ColumnccPortalBeaconRptNumBeaconsHeard | read-only | current | Description. Number of beacons reported in this entry |
| 1.3.6.1.4.1.388.6.19.5.1.3 | ColumnccPortalBeaconRptBest | read-only | current | Description. The strongest beacon signal strength heard since boot |
| 1.3.6.1.4.1.388.6.19.5.1.4 | ColumnccPortalBeaconRptWorst | read-only | current | Description. The weakest beacon signal strength heard since boot |
| 1.3.6.1.4.1.388.6.19.5.1.5 | ColumnccPortalBeaconRptSum | read-only | current | Description. The sum of all signal values heard |
| 1.3.6.1.4.1.388.6.19.5.1.6 | ColumnccPortalBeaconRptSumSquares | read-only | current | Description. The sum of each signal value heard, squared before summing |
| 1.3.6.1.4.1.388.6.19.5.1.7 | ColumnccPortalBeaconRptMostRecent | read-only | current | Description. The most-recent value of signal heard for a beacon |
| 1.3.6.1.4.1.388.6.19.5.1.8 | ColumnccPortalBeaconRptLastHeard | read-only | current | Description. Snapshot of sysUpTime at the time the prior item(s) in this entry were last updated. |
| 1.3.6.1.4.1.388.6.19.5.1.9 | ColumnccPortalBeaconRpFinderMac | read-only | current | Description. |
| 1.3.6.1.4.1.388.6.19.5.1.10 | ColumnccPortalBeaconRpFoundMac | read-only | current | Description. |
| 1.3.6.1.4.1.388.6.19.6 | TableccMuProbeRptTable | not-accessible | current | Description. This table reports the signal strength of ProbeRequest packets heard from each MU by each Portal that heard them |
| 1.3.6.1.4.1.388.6.19.6.1 | RowccMuProbeRptEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.19.6.1.1 | ColumnccMuProbeRptSignalMostRecent | read-only | current | Description. The signal strength, (in dBm), of the most-recently heard ProbeRequest from the given MU, (specified by the primary index: ccMuMac), from the give… |
| 1.3.6.1.4.1.388.6.19.6.1.2 | ColumnccMuProbeRptLastHeard | read-only | current | Description. Snapshot of sysUpTime at the time the prior item(s) in this entry were last updated |
| 1.3.6.1.4.1.388.6.19.6.1.3 | ColumnccMuProbeRptFinderMac | read-only | current | Description. |
| 1.3.6.1.4.1.388.6.19.6.1.4 | ColumnccMuProbeRptFoundMac | read-only | current | Description. |
| 1.3.6.1.4.1.388.6.20 | NodeccSensor | |||
| 1.3.6.1.4.1.388.6.20.1 | ScalarccSensorList | read-only | current | List of Mac Address of all discovered sensors |
| 1.3.6.1.4.1.388.6.20.2 | ScalarccApList | read-only | current | List of AP300s |
| 1.3.6.1.4.1.388.6.20.3 | ScalarccSensorRevert | read-write | current | syntax : <Mac - Address> Mac address of AP300 of a sensor to revert |
| 1.3.6.1.4.1.388.6.20.4 | ScalarccSensorConvert | read-write | current | syntax : <Mac - Address> Mac address of AP300 that is to be converted to a sensor |
| 1.3.6.1.4.1.388.6.20.5 | ScalarccSensorEnable | read-write | current | syntax : Enable(1)/Disable(0) Enable/Disable Sensor |
| 1.3.6.1.4.1.388.6.20.6 | TableccApSensorTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.20.6.1 | RowccApSensorEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.388.6.20.6.1.1 | ColumnccApSensorIndex | read-only | current | Description. |
| 1.3.6.1.4.1.388.6.20.6.1.2 | ColumnccApSensorMask | read-write | current | syntax : <Subnet Mask > Subnet mask of the sensor |
| 1.3.6.1.4.1.388.6.20.6.1.3 | ColumnccApSensorGateWay | read-write | current | syntax : <Gate Way> Gate Way of the sensor |
| 1.3.6.1.4.1.388.6.20.6.1.4 | ColumnccApSensorPrimary | read-write | current | syntax : <Primary Server Ip> Primary Server of the sensor |
| 1.3.6.1.4.1.388.6.20.6.1.5 | ColumnccApSensorSecondary | read-write | current | syntax : <Secondary Server Ip> Secondary Server of the sensor |
| 1.3.6.1.4.1.388.6.20.6.1.6 | ColumnccApSensorDhcp | read-write | current | syntax : Enable(1)/Disable(0) Enable/Disable dhcp |
| 1.3.6.1.4.1.388.6.20.6.1.7 | ColumnccApSensorIpaddress | read-write | current | syntax : < Ip Address> Ip Address of the sensor |
| 1.3.6.1.4.1.388.6.20.6.1.8 | ColumnccApSensorMac | read-only | current | Mac of the Sensor . |
| 1.3.6.1.4.1.388.6.1000 | NodeccV2dot0Groups | |||
| 1.3.6.1.4.1.388.6.1000.1 | Groupv2dot0Group | current | Description. | |
| 1.3.6.1.4.1.388.6.1000.2 | Groupv2dot0NotificationGroup | current | Description. | |
| 1.3.6.1.4.1.388.6.1000.3 | Groupv2dot0GroupOfDepricated | deprecated | Description. | |
| 1.3.6.1.4.1.388.6.1000.4 | Groupv2dot1Group | current | Description. | |
| 1.3.6.1.4.1.388.6.1000.5 | Groupv2dot1NotificationGroup | current | Description. | |
| 1.3.6.1.4.1.388.6.1000.6 | Groupv2dot1StatsGroup | current | Description. | |
| 1.3.6.1.4.1.388.6.1000.7 | Groupv2dot0GroupOfDeprecated | deprecated | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| APOnlineStatus | INTEGER { unavailable(0), active(1), inactive(2), alert(3), reset(4) } | current | unavailable(0), active(1), inactive(2), alert(3), reset(4) |
| APStatus | INTEGER { away(0), associated(1) } | current | Indicates the association status of the AccessPort. |
| AuthMethod | INTEGER { unknown(0), open(1), preshared(2), eap8021x(4), kerberos(8) } | current | The authentication method being used by the MU. |
| AuthState | INTEGER { notauthenticated(0), authenticated(1) } | current | Used to inform whether the MU is authenticated or not. |
| CurrentRate | INTEGER { rt1Mbps(0), rt2Mbps(1), rt55Mbps(2), rt11Mbps(3) } | current | Indicates the current communication rate on the MU. |
| EncrType | INTEGER { unknown(0), open(1), wep40(2), wep104(4), keyguard(8), tkip(16), aesCcmp(32) } | current | The list of availabe encryption types which could be used for BroadCast/MultiCast/Unicast. |
| FHAlgorithm | INTEGER { ieee(0), hopdelta(1) } | current | IEEE(0), Hop Delta(1) |
| HsbState | INTEGER { startup(1), findStandby(2), waitingForConnectivity(3), connected(4), halted(5), monitoring(6), actingAsPrimary(7), tryingtoReconnect(8), reconnected(9), autoreverting(10) } | current | Represents a Standby State. |
| MCValueOffset | INTEGER { srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7), desIPAddr(8), srcPort(9), desPort(10), multicastMask(11) } | current | srcMacAddr(0), desMacAddr(1), etherType(2), vlanID(3), userPriority(4), protocol(5), tos(6), srcIPAddr(7), desIPAddr(8), srcPort(9), desPort(10), multicastMask(11) |
| MUDeviceType | INTEGER { data(0), voice(1), wirelessAP(2) } | current | Indicates the device type of the Mobile Unit. |
| MUSecurityStatus | INTEGER { noEncryption(0), wepPerMUKey(1), wepSharedKey(2), tkipPerMUKey(3), tkipSharedKey(4) } | current | The security status for this MU. |
| PSPowerMode | INTEGER { cam(0), psp(1) } | current | Indicates the current power mode setting on this MU. |
| RowStatus | INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } | current | The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
| SnmpAdminString | OCTET STRING (SIZE (0..255)) | current | An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct… |
| SnmpOpers | INTEGER { softkill(0), hardkill(1), restart(2), updatecfg(3) } | current | softkill(0), hardkill(1), restart(2), updatecfg(3) |
| StorageType | INTEGER { other(1), volatile(2), nonVolatile(3), permanent(4), readOnly(5) } | current | Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is per… |
| SupportedRates | INTEGER { none(0), rt1Mbps(1), rt2Mbps(2), rt1and2Mbps(3), rt55Mbps(4), rt1and55Mbps(5), rt2and55Mbps(6), rt1and2and55Mbps(7), rt11Mbps(8), rt1and11Mbps(9), rt2and11Mbps(10), rt1and2and11Mbps(11), rt55and11Mbps(12), rt1and55and11Mbps(13), rt2and55and11Mbps(14), rt1and2and55and11Mbps(15) } | current | Indicates the current supported rates. |
| TargetOptions | INTEGER (0..4) | current | com2sec(0), trap2sink(1), trapsink(2), com2secAndtrap2sink(3), all(4) |
| TruthValue | INTEGER { true(1), false(2) } | current | Represents a boolean value. |