SYNERGY100G-HPE-STORMCONTROL-MIB
14 objects
||syn100GhpeStormControl mib||||
Imported Objects
| HPSVRMGMT-OID | hpVCSE-100Gb-F32-Module |
| IF-MIB | ifIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.5.7.5.9.1 | Nodesyn100GhpeSynergyStormControlMIBObjects | |||
| 1.3.6.1.4.1.11.5.7.5.9.1.1 | Nodesyn100GhpeStormControlGroup | |||
| 1.3.6.1.4.1.11.5.7.5.9.1.1.1 | Scalarsyn100GhpeStormControlSystemStatus | read-write | current | This object is used to enable or disable the StormControl on system. When user disables all storm control configurations will be deleted |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.2 | Scalarsyn100GhpeStormControlSystemRateLimitInPps | read-write | current | Allows to configure the limiting value for the maximum number of broadcast, multicast and destination lookup failure packets that can be received per second ov… |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.3 | Scalarsyn100GhpeStormControlSystemPollingInterval | read-write | current | This object is used to configure the polling time interval in seconds and this timer interval is used to read the multicast,broadcast and destination lookup fa… |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.4 | Tablesyn100GhpeStormControlStatsTable | not-accessible | current | A table to get the multicast,broadcast and destination lookup failure drop counters due to the rate limit for each physical interface. |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.4.1 | Rowsyn100GhpeStormControlStatsEntry | not-accessible | current | an entry appears in this table for each physical interface. |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.4.1.1 | Columnsyn100GhpeStormControlDLFDropCounters | read-only | current | An entry to get the received destination lookup failure packet drop counters due to the rate limit for the physical interface. |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.4.1.2 | Columnsyn100GhpeStormControlMCASTDropCounters | read-only | current | An entry to get the received multicast packet drop counters due to the rate limit for the physical interface. |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.4.1.3 | Columnsyn100GhpeStormControlBCASTDropCounters | read-only | current | An entry to get the received broad cast packet drop counters due to the rate limit for the physical interface. |
| 1.3.6.1.4.1.11.5.7.5.9.1.1.4.1.4 | Columnsyn100GhpeStormControlIfStatus | read-only | current | An entry to get the current drop status of dlf,bacst and mcast for the physical interface. The represntation of reason is as follows Bit 0 - dlf Drop Reason Bi… |
| 1.3.6.1.4.1.11.5.7.5.9.1.4110 | Identitysyn100GhpeStormControl | ||syn100GhpeStormControl mib|||| | ||
| 1.3.6.1.4.1.11.5.7.5.9.1.4110.2 | Nodesyn100GhpeStormControlTrap | |||
| 1.3.6.1.4.1.11.5.7.5.9.1.4110.2.1 | Notificationsyn100GhpestormControlTrap | current | This trap is generated when bcast,mcast and dlf drop counters are reached the configured rate limit within specified polling interval for each physical interfa… |