SYNLINK-MIB
173 objects
MIB File for SynLink PDUs SNMP functionality
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21728 | Nodesynaccess | |||
| 1.3.6.1.4.1.21728.4 | Identitysynlink | MIB File for SynLink PDUs SNMP functionality | ||
| 1.3.6.1.4.1.21728.4.1 | Nodedevice | |||
| 1.3.6.1.4.1.21728.4.1.1 | ScalarsynLinkModel | read-only | current | The model number of SynLink PDU |
| 1.3.6.1.4.1.21728.4.1.2 | ScalarenclosureSerialNumber | read-only | current | Serial number of SynLink PDU Controller and Enclosure |
| 1.3.6.1.4.1.21728.4.1.3 | ScalarcontrollerSerialNumber | read-only | current | Serial number of SynLink PDU Controller and Enclosure |
| 1.3.6.1.4.1.21728.4.1.4 | ScalarinletConfiguration | read-only | current | Either 'standard', 'dualcircuit', or 'ats' |
| 1.3.6.1.4.1.21728.4.1.5 | ScalarnumOutlets | read-only | current | Number of outlets on PDU |
| 1.3.6.1.4.1.21728.4.1.6 | ScalarnumBanks | read-only | current | Number of banks currently connected |
| 1.3.6.1.4.1.21728.4.1.7 | Scalarphase | read-only | current | 1 for single phase. 2 for 3 phase delta. 3 for 3 phase wye. |
| 1.3.6.1.4.1.21728.4.1.8 | ScalarnumInlets | read-only | current | Number of Inlets. Either 1 or 2. ATS Dual inlets count as a single inlet. |
| 1.3.6.1.4.1.21728.4.1.9 | ScalaroutletPwrMeasurementsSupported | read-only | current | Describes if individual outlet current measurements is supported |
| 1.3.6.1.4.1.21728.4.1.10 | ScalaroutletSwitchingSupported | read-only | current | Describes if individual outlet switching is supported |
| 1.3.6.1.4.1.21728.4.1.11 | ScalardeviceName | read-write | current | User defined name for device |
| 1.3.6.1.4.1.21728.4.1.12 | ScalardeviceIpAddress | read-only | current | IP Address for device. |
| 1.3.6.1.4.1.21728.4.2 | Nodeinlets | |||
| 1.3.6.1.4.1.21728.4.2.1 | TableinletTable | not-accessible | current | Table of all inlets entries. Inlet Entry includes information about plug type, power capacity number of poles and more. |
| 1.3.6.1.4.1.21728.4.2.1.1 | RowinletEntry | not-accessible | current | Inlet Object for an individual inlet instance. |
| 1.3.6.1.4.1.21728.4.2.1.1.1 | ColumninletIndex | not-accessible | current | Which number inlet it is. |
| 1.3.6.1.4.1.21728.4.2.1.1.2 | ColumninletType | read-only | current | Describes which type of setup the inlet is part of. Single for one input plug. Double for two simultaneously used input plugs. ATS (Auto Transfer Switch) for 2… |
| 1.3.6.1.4.1.21728.4.2.1.1.3 | ColumninletPlug | read-only | current | The type of Inlet Plug Connector. |
| 1.3.6.1.4.1.21728.4.2.1.1.4 | ColumninletName | read-write | current | User defined name for Inlet |
| 1.3.6.1.4.1.21728.4.2.1.1.5 | ColumninletEnergyAccumulation | read-only | current | kWH value to show energy consumption for inlet plug |
| 1.3.6.1.4.1.21728.4.2.1.1.6 | ColumninletPowerFactor | read-only | current | Power factor value for inlet plug |
| 1.3.6.1.4.1.21728.4.2.1.1.7 | ColumninletPhase | read-only | current | Possibilities are: Single Phase, 3 Phase Delta, or 3 Phase Wye |
| 1.3.6.1.4.1.21728.4.2.1.1.8 | ColumninletUuid | read-only | current | Unique identifier for Inlet |
| 1.3.6.1.4.1.21728.4.2.1.1.9 | Columninlet3PhaseBalance | read-only | current | Percentage of imbalance in 3 phase inlet. Calculated with largest difference of any 2 lines, divided by average current. All times 100. |
| 1.3.6.1.4.1.21728.4.2.1.1.10 | ColumninletLine1CurrentRms | read-only | current | Line 1 of 3 phase inlet Current RMS in Amperes |
| 1.3.6.1.4.1.21728.4.2.1.1.11 | ColumninletLine2CurrentRms | read-only | current | Line 2 of 3 phase inlet Current RMS in Amperes |
| 1.3.6.1.4.1.21728.4.2.1.1.12 | ColumninletLine3CurrentRms | read-only | current | Line 3 of 3 phase inlet Current RMS in Amperes |
| 1.3.6.1.4.1.21728.4.2.1.1.13 | ColumninletLineConfiguration | read-only | current | Applies only to single phase. Options are L-L, L-N, or L-L\N |
| 1.3.6.1.4.1.21728.4.2.1.1.14 | ColumninletActivePower | read-only | current | Inlet Active Power in watts |
| 1.3.6.1.4.1.21728.4.2.1.1.15 | ColumninletApparentPower | read-only | current | Inlet Apparent Power in Volt-amperes (VA) |
| 1.3.6.1.4.1.21728.4.2.1.1.16 | ColumninletReactivePower | read-only | current | Inlet Reactive Power in Volt-Amps-Reactive (VAR) |
| 1.3.6.1.4.1.21728.4.2.1.1.17 | ColumninletCurrentRms | read-only | current | Inlet current draw in amps |
| 1.3.6.1.4.1.21728.4.2.1.1.18 | ColumninletLineFrequency | read-only | current | Inlet line frequency in hertz |
| 1.3.6.1.4.1.21728.4.2.1.1.19 | ColumninletVoltageRms | read-only | current | Inlet voltage RMS in volts |
| 1.3.6.1.4.1.21728.4.2.1.1.20 | ColumnatsActiveInlet | read-only | current | If inputType is 'ats' then this value will be true if it is the currently used inlet. False if the inlet is not in use. |
| 1.3.6.1.4.1.21728.4.2.1.1.21 | ColumnatsInletId | read-only | current | Should be A (primary) or B (secondary) for two ATS inputs |
| 1.3.6.1.4.1.21728.4.2.1.1.22 | ColumnatsInletReady | read-only | current | Whether the Inlet is ready to be used as a power source |
| 1.3.6.1.4.1.21728.4.4 | Nodebanks | |||
| 1.3.6.1.4.1.21728.4.4.1 | TablebankTable | not-accessible | current | Table of bank instances. |
| 1.3.6.1.4.1.21728.4.4.1.1 | RowbankEntry | not-accessible | current | Bank object for a particular outlet bank. |
| 1.3.6.1.4.1.21728.4.4.1.1.1 | ColumnbankIndex | not-accessible | current | Which number bank it is. |
| 1.3.6.1.4.1.21728.4.4.1.1.2 | ColumnbankUuid | read-only | current | Unique Identifier for Bank |
| 1.3.6.1.4.1.21728.4.4.1.1.3 | ColumnbankOutletSwitchingSupported | read-only | current | Describes if bank outlets have relays for switching |
| 1.3.6.1.4.1.21728.4.4.1.1.4 | ColumnbankOutletMeteringSupported | read-only | current | Describes if bank outlets can measure individual outlet current in amps |
| 1.3.6.1.4.1.21728.4.4.1.1.5 | ColumnbankCurrentRms | read-only | current | Current RMS of all outlets on bank in Amperes. |
| 1.3.6.1.4.1.21728.4.4.1.1.6 | ColumnbankVoltage | read-only | current | Voltage of bank. |
| 1.3.6.1.4.1.21728.4.4.1.1.7 | ColumnbankLineFrequency | read-only | current | Line Frequency of bank. |
| 1.3.6.1.4.1.21728.4.4.1.1.8 | ColumnbankPowerFactor | read-only | current | Bank Power factor |
| 1.3.6.1.4.1.21728.4.4.1.1.9 | ColumnbankLines | read-only | current | Specific Lines or line configuration which this bank is utilizing |
| 1.3.6.1.4.1.21728.4.4.1.1.10 | ColumnbankActivePower | read-only | current | Active Power of bank. |
| 1.3.6.1.4.1.21728.4.4.1.1.11 | ColumnbankReactivePower | read-only | current | Reactive Power of bank. |
| 1.3.6.1.4.1.21728.4.4.1.1.12 | ColumnbankApparentPower | read-only | current | Apparent Power of bank. |
| 1.3.6.1.4.1.21728.4.4.1.1.13 | ColumnbankName | read-write | current | User defined bank name. |
| 1.3.6.1.4.1.21728.4.4.1.1.14 | ColumnbankBreakerSupported | read-only | current | True if bank has an associated over current protector. |
| 1.3.6.1.4.1.21728.4.4.1.1.15 | ColumnbankBreakerState | read-only | current | True if breaker is working and not considered 'tripped' |
| 1.3.6.1.4.1.21728.4.5 | Nodeoutlets | |||
| 1.3.6.1.4.1.21728.4.5.1 | TableoutletTable | not-accessible | current | Table of outlet instances. |
| 1.3.6.1.4.1.21728.4.5.1.1 | RowoutletEntry | not-accessible | current | Outlet object for a particular input line. |
| 1.3.6.1.4.1.21728.4.5.1.1.1 | ColumnoutletIndex | not-accessible | current | Which number outlet it is. |
| 1.3.6.1.4.1.21728.4.5.1.1.2 | ColumnoutletUuid | read-only | current | Unique identifier for outlet |
| 1.3.6.1.4.1.21728.4.5.1.1.3 | ColumnoutletName | read-write | current | User defined name for outlet. |
| 1.3.6.1.4.1.21728.4.5.1.1.6 | ColumnoutletCurrentRms | read-only | current | Current RMS in Amperes for individual outlet if supported. |
| 1.3.6.1.4.1.21728.4.5.1.1.7 | ColumnoutletState | read-write | current | State of relay. '0' means outlet is off (relay is open). '1' means outlet is on (relay is closed). Set '2' to power cycle outlet. |
| 1.3.6.1.4.1.21728.4.5.1.1.8 | ColumnoutletConnector | read-only | current | Type of Outlet Receptacle. |
| 1.3.6.1.4.1.21728.4.6 | Nodegroups | |||
| 1.3.6.1.4.1.21728.4.6.1 | TablegroupTable | not-accessible | current | Table of all outlet groups entries. |
| 1.3.6.1.4.1.21728.4.6.1.1 | RowgroupEntry | not-accessible | current | Group Object for a group of outlets. |
| 1.3.6.1.4.1.21728.4.6.1.1.1 | ColumngroupIndex | not-accessible | current | Which number group it is. |
| 1.3.6.1.4.1.21728.4.6.1.1.2 | ColumngroupName | read-write | current | User defined name for group |
| 1.3.6.1.4.1.21728.4.6.1.1.3 | ColumngroupUuid | read-only | current | Unique identifier for group |
| 1.3.6.1.4.1.21728.4.6.1.1.4 | ColumngroupSetState | read-write | current | Set all outlets within state to given state. On for on, off for off. |
| 1.3.6.1.4.1.21728.4.6.1.1.5 | ColumngroupReboot | read-write | current | Reboot all outlets within a group |
| 1.3.6.1.4.1.21728.4.6.1.1.6 | ColumngroupCurrentRms | read-only | current | Current RMS sum of all outlet current measurements. Available only of outlet metering supported. |
| 1.3.6.1.4.1.21728.4.7 | Nodesensors | |||
| 1.3.6.1.4.1.21728.4.7.1 | TablesensorTable | not-accessible | current | Table of Sensor entries. |
| 1.3.6.1.4.1.21728.4.7.1.1 | RowsensorEntry | not-accessible | current | Sensor instance. |
| 1.3.6.1.4.1.21728.4.7.1.1.1 | ColumnsensorIndex | not-accessible | current | Number of sensor |
| 1.3.6.1.4.1.21728.4.7.1.1.2 | ColumnsensorType | read-only | current | Type of sensor. hum_temp for humidity & temp sensor |
| 1.3.6.1.4.1.21728.4.7.1.1.3 | ColumnsensorTemp | read-only | current | Temperature if supported in celsius. sensorTempOffset is added to raw value to generate output of this OID. |
| 1.3.6.1.4.1.21728.4.7.1.1.4 | ColumnsensorHumidity | read-only | current | Humidity if supported in percentage humidity. sensorHumidityOffset is added to raw value to generate output of this OID. |
| 1.3.6.1.4.1.21728.4.7.1.1.5 | ColumnsensorTempOffset | read-write | current | Offset for temperature. Signed value. |
| 1.3.6.1.4.1.21728.4.7.1.1.6 | ColumnsensorHumidityOffset | read-write | current | Offset for humidity. Signed Value |
| 1.3.6.1.4.1.21728.4.7.1.1.7 | ColumnsensorName | read-write | current | User defined name for sensor |
| 1.3.6.1.4.1.21728.4.8 | Nodelogs | |||
| 1.3.6.1.4.1.21728.4.8.1 | TablepowerLogTable | not-accessible | current | Table of all logging metric related to power |
| 1.3.6.1.4.1.21728.4.8.1.1 | RowpowerLogEntry | not-accessible | current | Instance of logging metric |
| 1.3.6.1.4.1.21728.4.8.1.1.1 | ColumnpwrLogIndex | not-accessible | current | ID for log entry |
| 1.3.6.1.4.1.21728.4.8.1.1.2 | ColumnpwrLogType | read-only | current | Type of logging metric. Can be |
| 1.3.6.1.4.1.21728.4.8.1.1.3 | ColumnpwrLogValue | read-only | current | Various types. Current values. |
| 1.3.6.1.4.1.21728.4.8.2 | TableenvironmentLogTable | not-accessible | current | Table of all logging metric related to temperature and humidity |
| 1.3.6.1.4.1.21728.4.8.2.1 | RowenvironmentLogEntry | not-accessible | current | Instance of logging metric |
| 1.3.6.1.4.1.21728.4.8.2.1.1 | ColumnenvLogIndex | not-accessible | current | ID for log entry |
| 1.3.6.1.4.1.21728.4.8.2.1.2 | ColumnenvLogType | read-only | current | Type of logging metric. Can be temp or humidity |
| 1.3.6.1.4.1.21728.4.8.2.1.3 | ColumnenvLogValue | read-only | current | Either temp in celsius or humidity in percentage |
| 1.3.6.1.4.1.21728.4.9 | Nodeevents | |||
| 1.3.6.1.4.1.21728.4.9.0 | NodeeventTraps | |||
| 1.3.6.1.4.1.21728.4.9.0.1 | NotificationautopingTimeout | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.2 | Notificationline1CurrentMaxThreshold | current | Line 1 Max current trigger | |
| 1.3.6.1.4.1.21728.4.9.0.3 | Notificationline2CurrentMaxThreshold | current | Line 2 Max current trigger | |
| 1.3.6.1.4.1.21728.4.9.0.4 | Notificationline3CurrentMaxThreshold | current | Line 3 Max current trigger | |
| 1.3.6.1.4.1.21728.4.9.0.5 | Notificationline1CurrentMinThreshold | current | Line 1 Max current trigger | |
| 1.3.6.1.4.1.21728.4.9.0.6 | Notificationline2CurrentMinThreshold | current | Line 1 Max current trigger | |
| 1.3.6.1.4.1.21728.4.9.0.7 | Notificationline3CurrentMinThreshold | current | Line 1 Max current trigger | |
| 1.3.6.1.4.1.21728.4.9.0.8 | NotificationinletCurrentMaxThreshold | current | Inlet Max Current Threshold Trigger. Applies to single phase PDUs Only | |
| 1.3.6.1.4.1.21728.4.9.0.9 | NotificationinletCurrentMinThreshold | current | Inlet Max Current Threshold Trigger. Applies to single phase PDUs Only | |
| 1.3.6.1.4.1.21728.4.9.0.10 | NotificationinletVoltageMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.11 | NotificationinletVoltageMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.12 | NotificationinletLineFrequencyMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.13 | NotificationinletLineFrequencyMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.14 | NotificationinletPowerFactorMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.15 | NotificationinletActiveEnergyMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.16 | NotificationinletActivePowerMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.17 | NotificationinletActivePowerMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.18 | NotificationinletApparentPowerMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.19 | NotificationinletApparentPowerMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.20 | NotificationinletReactivePowerMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.21 | NotificationinletReactivePowerMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.22 | Notificationinlet3phaseImbalance | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.23 | NotificationbankBreakerTrip | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.24 | NotificationbankCurrentMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.25 | NotificationbankCurrentMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.26 | NotificationbankVoltageMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.27 | NotificationbankVoltageMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.28 | NotificationbankLineFrequencyMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.29 | NotificationbankLineFrequencyMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.30 | NotificationbankPowerfactorMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.32 | NotificationbankActivePowerMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.33 | NotificationbankActivePowerMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.34 | NotificationbankApparentPowerMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.35 | NotificationbankApparentPowerMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.36 | NotificationbankReactivePowerMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.37 | NotificationbankReactivePowerMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.38 | NotificationoutletCurrentMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.39 | NotificationoutletCurrentMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.42 | NotificationtemperatureMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.43 | NotificationtemperatureMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.44 | NotificationhumidityMaxThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.45 | NotificationhumidityMinThreshold | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.46 | NotificationscheduledTime | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.47 | NotificationscheduledInterval | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.48 | NotificationatsInletSwitchedToSecondary | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.49 | NotificationatsInletSwitchedToPrimary | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.50 | NotificationatsInletSecondaryPowerLoss | current | event description | |
| 1.3.6.1.4.1.21728.4.9.0.51 | NotificationatsInletSecondaryPowerRestored | current | event description | |
| 1.3.6.1.4.1.21728.4.9.2 | NodeeventTriggers | |||
| 1.3.6.1.4.1.21728.4.9.2.1 | TableeventTriggerTable | not-accessible | current | Table of all Event Triggers |
| 1.3.6.1.4.1.21728.4.9.2.1.1 | RoweventTriggerEntry | not-accessible | current | Instance of Event Trigger |
| 1.3.6.1.4.1.21728.4.9.2.1.1.1 | ColumneventTriggerIndex | not-accessible | current | ID for event trigger entry |
| 1.3.6.1.4.1.21728.4.9.2.1.1.2 | ColumneventType | read-only | current | Type of event. Can be any of traps. (Show Table) |
| 1.3.6.1.4.1.21728.4.9.2.1.1.3 | ColumneventCode | read-only | current | Unique code for event |
| 1.3.6.1.4.1.21728.4.9.2.1.1.4 | ColumneventName | read-only | current | Used defined name for event trigger. |
| 1.3.6.1.4.1.21728.4.9.2.1.1.5 | ColumneventTriggerAttr1 | read-only | current | First Attribute. See Event Table for details on specified Attr. |
| 1.3.6.1.4.1.21728.4.9.2.1.1.6 | ColumneventTriggerAttr2 | read-only | current | Second Attribute. See Event Table for details on specified Attr. |
| 1.3.6.1.4.1.21728.4.9.2.1.1.7 | ColumneventTriggerAttr3 | read-only | current | Third Attribute. See Event Table for details on specified Attr. |
| 1.3.6.1.4.1.21728.4.9.2.1.1.8 | ColumneventIsTriggered | read-only | current | Describes whether or not the trigger has met it's threshold |
| 1.3.6.1.4.1.21728.4.9.2.1.1.9 | ColumneventTriggeredTime | read-only | current | Time in seconds that this event has been triggered |
| 1.3.6.1.4.1.21728.4.10 | Nodeconformance | |||
| 1.3.6.1.4.1.21728.4.10.1 | NodesynLinkGroups | |||
| 1.3.6.1.4.1.21728.4.10.1.1 | GroupsynLinkDeviceGroup | current | Device Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.2 | GroupsynLinkInletGroup | current | Inlet Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.4 | GroupsynLinkBankGroup | current | Bank Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.5 | GroupsynLinkOutletGroup | current | Outlet Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.6 | GroupsynLinkGroupGroup | current | Outlet Group Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.7 | GroupsynLinkSensorGroup | current | Sensor Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.8 | GroupsynLinkLogGroup | current | Log Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.9 | GroupsynLinkEventGroup | current | Event Triggers Objects Group | |
| 1.3.6.1.4.1.21728.4.10.1.10 | GroupsynLinkTrapGroup | current | Event Trap Objects Groups | |
| 1.3.6.1.4.1.21728.4.10.2 | NodesynLinkCompliances | |||
| 1.3.6.1.4.1.21728.4.10.2.1 | CompliancesynLinkCompliance | current | Requirements for SYNLINK-MIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RelayEnumeration | INTEGER { open(0), closed(1) } | current | Relay States |