SYNOPTICS-COMMON-MIB
106 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| SYNOPTICS-ROOT-MIB | s3SnmpAgent series3000 SnpxBackplaneType SnpxChassisType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.2.1 | Nodes3AgentSw | |||
| 1.3.6.1.4.1.45.1.2.1.1 | Scalars3AgentType | read-only | mandatory | The 3000 series agent's Module type. |
| 1.3.6.1.4.1.45.1.2.1.2 | Scalars3AgentFwVer | read-only | mandatory | The agent's module firmware version 0=Rev A,1=Rev B,etc. |
| 1.3.6.1.4.1.45.1.2.1.3 | Scalars3AgentSwMajorVer | read-only | mandatory | The agent major software version number. (version is specified as major.minor.maint or 3.0.1). Object is in decimal. |
| 1.3.6.1.4.1.45.1.2.1.4 | Scalars3AgentSwMinorVer | read-only | mandatory | The agent minor software version number (version is specified as major.minor.maint or 3.0.1). Object is in decimal. |
| 1.3.6.1.4.1.45.1.2.1.5 | Scalars3AgentBootProtocol | read-only | mandatory | Boot protocol used to load the module with its software. On Agents with the Local Load option the value return by this object is valid only if the MIB object s… |
| 1.3.6.1.4.1.45.1.2.1.6 | Scalars3AgentBootFile | read-write | mandatory | The name of the boot file that is sent to the file server during boot time. The actual boot protocol used to retrieve the file is determined by s3AgentBootProt… |
| 1.3.6.1.4.1.45.1.2.1.7 | Scalars3AgentAuthTrap | read-write | deprecated | Enable or disable the use of authentication error trap generation. This parameter will take effect only after a restart (s3AgentRestart) is issued. This parame… |
| 1.3.6.1.4.1.45.1.2.1.8 | Scalars3AgentLocation | read-write | deprecated | This is a informational string that could be used to show the physical location (i.e. area) of the NMM or concentrator. This parameter will take effect only af… |
| 1.3.6.1.4.1.45.1.2.1.9 | Scalars3AgentMibLevel | read-only | mandatory | Used to determine current MIB release supported by agent. The encoding of this object is of the following form: xyy, where x is the major version number and yy… |
| 1.3.6.1.4.1.45.1.2.1.10 | Scalars3AgentFeatureLevel | read-only | deprecated | Used to determine feature level of the agent. The encoding of this object is of the following form: xyy, where x is the major version number and yy is the mino… |
| 1.3.6.1.4.1.45.1.2.1.11 | Scalars3AgentMySlotId | read-only | mandatory | Slot where this agent currently resides. If hardware is unable to determine then a 0 should be returned. |
| 1.3.6.1.4.1.45.1.2.1.12 | Scalars3AgentUnAuthIp | read-only | mandatory | This object contains the IP address of the last station that tried to access this agent with an invalid community string. This object is used as a VarBind in a… |
| 1.3.6.1.4.1.45.1.2.1.13 | Scalars3AgentUnAuthComm | read-only | mandatory | This object contains the community string of the last unauthenticated attempt to access this agent. This object is used as a VarBind in an Authentication Trap … |
| 1.3.6.1.4.1.45.1.2.1.14 | Scalars3AgentSwLicenseCode | read-only | mandatory | The software license code assigned to this agent. This code is required for initializing the agent. The code consists of exactly eight printable characters. |
| 1.3.6.1.4.1.45.1.2.1.15 | Scalars3AgentPerformance | read-only | mandatory | This counts the CPU idle time of the agent in units of 10 microseconds. |
| 1.3.6.1.4.1.45.1.2.1.16 | Scalars3AgentSwMaintVer | read-only | mandatory | The agent software maintenance version number (version is specified as major.minor.maint or 3.0.1). Object is in decimal. |
| 1.3.6.1.4.1.45.1.2.1.17 | Scalars3AgentConfigLoadMode | read-write | mandatory | This indicates whether the agent should get configuration data from the network, use the local configuration data, or try the network first and then fall back … |
| 1.3.6.1.4.1.45.1.2.1.18 | Scalars3AgentConfigActualSource | read-only | mandatory | This indicates whether the agent loaded configuration data from the network or used the local configuration data. |
| 1.3.6.1.4.1.45.1.2.1.19 | Scalars3AgentMgmtProtoMode | read-write | mandatory | This indicates from which network transports over which the agent will accept SNMP requests. This object only applies to agents with IP and IPX dual stack supp… |
| 1.3.6.1.4.1.45.1.2.1.20 | Scalars3AgentActualMgmtProtocol | read-only | mandatory | This indicates which network transports over which the agent will currently accept SNMP requests. |
| 1.3.6.1.4.1.45.1.2.1.21 | Scalars3AgentImageFile | read-write | mandatory | The name of the agent image file that the NMM loads at boot time. This parameter will not take effect until written to EEPROM (s3AgentWriteEeprom) and a reset … |
| 1.3.6.1.4.1.45.1.2.2 | Nodes3AgentNetProtocol | |||
| 1.3.6.1.4.1.45.1.2.2.1 | Nodes3AgentIpProtocol | |||
| 1.3.6.1.4.1.45.1.2.2.1.1 | Scalars3AgentIpAddr | read-write | mandatory | The Agent's administrative IP address. The current operational IP address can be obtained by the ipAdEntAddr entry in the ipAddrTable. This parameter will take… |
| 1.3.6.1.4.1.45.1.2.2.1.2 | Scalars3AgentNetMask | read-write | mandatory | The Agent's administrative subnet mask. The current operational subnet mask can be obtained by the ipAdEntNetMask entry in the ipAddrTable. This parameter will… |
| 1.3.6.1.4.1.45.1.2.2.1.3 | Scalars3AgentDefaultGateway | read-write | mandatory | The Agent's administrative default gateway IP address. The current operational default gateway's IP address can be obtained from the ipRoutingTable. This param… |
| 1.3.6.1.4.1.45.1.2.2.1.4 | Scalars3AgentBootServerAddr | read-write | mandatory | The IP address to which the requests for boot files are sent. The protocol used to retrieve the boot files is determined by object s3AgentBootProtocol. This pa… |
| 1.3.6.1.4.1.45.1.2.2.1.5 | Scalars3AgentSecDefaultGateway | read-write | mandatory | The agent's administrative secondary default gateway IP address. This default gateway's IP address will be used when the primary default gateway (s3AgentDefaul… |
| 1.3.6.1.4.1.45.1.2.2.1.6 | Scalars3AgentPingDefaultRtrSwitch | read-write | mandatory | Controls whether the agent will periodically send out the icmp echos (pings) to the default router(s). The values are: other(1)...unknown or other on(2)......a… |
| 1.3.6.1.4.1.45.1.2.2.1.7 | Scalars3AgentPingDefaultRtrTime | read-write | mandatory | The time interval that the agent uses to send out the pings periodically to the default router(s) to check if the router(s) are still reachable. |
| 1.3.6.1.4.1.45.1.2.2.1.8 | Scalars3AgentBootRouter | read-write | mandatory | The default route IP address used at boot time to download the NMM's agent configuration and image files from the TFTP server. This parameter will not survive … |
| 1.3.6.1.4.1.45.1.2.3 | Tables3AgentTrapReceiverTable | not-accessible | mandatory | Table containing list of NMS's that are to receive traps generated by this NMM. |
| 1.3.6.1.4.1.45.1.2.3.1 | Rows3AgentTrapReceiverEntry | not-accessible | mandatory | A destination address and community string to a particular trap server, along with a trap filter and entry aging capability. |
| 1.3.6.1.4.1.45.1.2.3.1.1 | Columns3AgentTrapRcvrStatus | read-write | mandatory | Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the s3AgentTrapReceiverTable. That is, it effectively dis… |
| 1.3.6.1.4.1.45.1.2.3.1.2 | Columns3AgentTrapRcvrNetAddress | read-write | mandatory | IP address for trap server that is to receive the trap. |
| 1.3.6.1.4.1.45.1.2.3.1.3 | Columns3AgentTrapRcvrComm | read-write | mandatory | Community string used for traps sent to this trap receiver. |
| 1.3.6.1.4.1.45.1.2.3.1.4 | Columns3AgentTrapRcvrAgeTime | read-write | mandatory | This is the time interval used to age entries out of the trap receiver table. The default value if not specified will be 0, or infinite, never to be aged out. |
| 1.3.6.1.4.1.45.1.2.4 | Nodes3AgentHw | |||
| 1.3.6.1.4.1.45.1.2.4.1 | Scalars3AgentStatus | read-only | mandatory | This indicates whether the NMM is online(2) and operating, or offline(1) (ie: not connected to the concentrator backplane). |
| 1.3.6.1.4.1.45.1.2.4.2 | Scalars3AgentMdaHwVer | read-only | mandatory | The network management module's MDA hardware version number (0=Rev. A, 1=Rev. B, etc.). |
| 1.3.6.1.4.1.45.1.2.4.3 | Scalars3AgentMode | read-write | mandatory | This indicates whether the NMM is operating in primary(1) or secondary(2) mode. |
| 1.3.6.1.4.1.45.1.2.4.4 | Scalars3AgentReset | read-write | mandatory | Network management module reset status. Writing a reset(2) to this object will reset the NMM and perform a download and restart. |
| 1.3.6.1.4.1.45.1.2.4.5 | Scalars3AgentRestart | read-write | mandatory | Network management module restart status. Writing a restart(2) to this object will restart the NMM. This initializes all the counters, re-reads the EEPROM data… |
| 1.3.6.1.4.1.45.1.2.4.6 | Scalars3AgentBootMode | read-write | mandatory | The method for obtaining boot parameter information. The possible values are: eeprom(1)......get boot info from eeprom net(2).........get boot info from remote… |
| 1.3.6.1.4.1.45.1.2.4.7 | Scalars3AgentWriteEeprom | read-write | mandatory | Network management module EEPROM write status. Writing a (2) to this object will write the contents of current EEPROM data structure in the EEPROM. |
| 1.3.6.1.4.1.45.1.2.4.8 | Scalars3AgentBaudRate | read-write | mandatory | Specifies the baud rate in bits per second of either the internal modem or the RS-232 port. This parameter will take effect only after a restart (s3AgentRestar… |
| 1.3.6.1.4.1.45.1.2.4.9 | Scalars3AgentInitString | read-write | mandatory | This is the initialization string used to establish the out-of-band connection. (i.e. could contain the string ATDT,415-960-1100 for an internal or external mo… |
| 1.3.6.1.4.1.45.1.2.4.10 | Scalars3AgentEepromSize | read-only | mandatory | The size of the EEPROM of the agent in units of bytes. |
| 1.3.6.1.4.1.45.1.2.4.11 | Scalars3AgentEpromSize | read-only | mandatory | The size of the EPROM of the agent in units of bytes. |
| 1.3.6.1.4.1.45.1.2.4.12 | Scalars3AgentDramSize | read-only | mandatory | The size of the DRAM of the agent in units of bytes. |
| 1.3.6.1.4.1.45.1.2.4.13 | Scalars3AgentHexDisplay | read-only | mandatory | The current 4 ASCII character display of the agent. Agents with no hex display hardware should return a zero length string. |
| 1.3.6.1.4.1.45.1.2.4.14 | Scalars3AgentFlashStatus | read-only | mandatory | This indicates the operational status of the flash device of the agent. A fail(3) indicates that either the flash device configuration on board is not valid or… |
| 1.3.6.1.4.1.45.1.2.5 | Nodes3AgentSpecific | |||
| 1.3.6.1.4.1.45.1.2.6 | Nodes3AgentLocImage | |||
| 1.3.6.1.4.1.45.1.2.6.1 | Scalars3LocImageValid | read-only | mandatory | This indicates whether the agent has a valid local code image on board. An EPROM checksum failure would cause the agent to return localImageInvalid(3). |
| 1.3.6.1.4.1.45.1.2.6.2 | Scalars3LocImageMajorVersion | read-only | mandatory | The major software version number of the locally-stored image. This object applies only to agents with valid local image. Other agents should return zero. |
| 1.3.6.1.4.1.45.1.2.6.3 | Scalars3LocImageMinorVersion | read-only | mandatory | The minor software version number of the locally-stored image. This object applies only to agents with valid local image. Other agents should return zero. |
| 1.3.6.1.4.1.45.1.2.6.4 | Scalars3LocImageLoadMode | read-write | mandatory | This indicates whether the agent should get code from the network, use a local image, or try the network first and then fall back to local image if the network… |
| 1.3.6.1.4.1.45.1.2.6.5 | Scalars3LocImageActualSource | read-only | mandatory | This indicates whether the agent loaded code from the network or used a local image. When the the ImageLoadMode is localAsBackup, this variable indicates wheth… |
| 1.3.6.1.4.1.45.1.2.6.6 | Scalars3LocImageMaintVersion | read-only | mandatory | The maintenance software version number of the locally-stored image. This object applies only to agents with valid local image. Other agents should return zero. |
| 1.3.6.1.4.1.45.1.3.1 | Nodes3000Chassis | |||
| 1.3.6.1.4.1.45.1.3.1.1 | Scalars3ChassisType | read-only | mandatory | The chassis type. |
| 1.3.6.1.4.1.45.1.3.1.2 | Scalars3ChassisBkplType | read-only | mandatory | The chassis backplane type. |
| 1.3.6.1.4.1.45.1.3.1.3 | Scalars3ChassisBkplRev | read-only | mandatory | The chassis backplane revision. |
| 1.3.6.1.4.1.45.1.3.1.4 | Scalars3ChassisPsType | read-only | mandatory | The chassis power supply type. This value is valid only when the backplane type is not other(1). If the chassis has a redundant backplane, the agent returns re… |
| 1.3.6.1.4.1.45.1.3.1.5 | Scalars3ChassisPsStatus | read-only | mandatory | The chassis power supply status. |
| 1.3.6.1.4.1.45.1.3.1.6 | Scalars3ChassisFanStatus | read-only | mandatory | The status of the chassis cooling fan. |
| 1.3.6.1.4.1.45.1.3.1.7 | Tables3SlotConfigTable | not-accessible | mandatory | The chassis slot configuration table. |
| 1.3.6.1.4.1.45.1.3.1.7.1 | Rows3SlotConfigEntry | not-accessible | mandatory | What type of module is in each slot of the chassis. |
| 1.3.6.1.4.1.45.1.3.1.7.1.1 | Columns3SlotNumber | read-only | mandatory | The 3000 Chassis slot number. Valid entries are 1-12. |
| 1.3.6.1.4.1.45.1.3.1.7.1.2 | Columns3SlotModuleId | read-only | mandatory | ID for the module. Values are specified in SynOptics technical documents. |
| 1.3.6.1.4.1.45.1.3.1.7.1.3 | Columns3SlotModuleType | read-only | deprecated | The type of module this entry represents. Values are specified in SynOptics technical documents. |
| 1.3.6.1.4.1.45.1.3.1.7.1.4 | Columns3SlotModuleDescr | read-only | mandatory | Module description. Values are specified in SynOptics technical documents. |
| 1.3.6.1.4.1.45.1.3.1.7.1.5 | Columns3SlotModuleLed | read-only | mandatory | Status of the module LEDs. Format is specified in SynOptics technical documents. NOTE: the 291x FDDI workgroup concentrators actually return a string with size… |
| 1.3.6.1.4.1.45.1.3.1.7.1.6 | Columns3SlotModuleMdaId | read-only | mandatory | ID of the medium-dependent part of the board. The value is board dependent. Values are specified in SynOptics technical documents. |
| 1.3.6.1.4.1.45.1.3.1.8 | Tables3CommonBoardTable | not-accessible | mandatory | A table containing information about the boards currently plugged into the 3000 Chassis. This board table contains an entry for each non-empty slot in the s3Sl… |
| 1.3.6.1.4.1.45.1.3.1.8.1 | Rows3CommonBoardEntry | not-accessible | mandatory | A table entry containing information about a single Board currently plugged into the 3000 Chassis. These values can be retrieved using the common board NMI com… |
| 1.3.6.1.4.1.45.1.3.1.8.1.1 | Columns3CommonBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.1.8.1.2 | Columns3CommonBoardId | read-only | mandatory | This is the ID of the board, which is 'hard-coded' in the board, and identifies the board's basic functionality. Some boards have the capability to change aspe… |
| 1.3.6.1.4.1.45.1.3.1.8.1.3 | Columns3CommonBoardHwVer | read-only | mandatory | The hardware revision of the board. 0=Rev. A, 1=Rev. B, etc. |
| 1.3.6.1.4.1.45.1.3.1.8.1.4 | Columns3CommonBoardStatus | read-only | mandatory | This indicates the operational status of the board. |
| 1.3.6.1.4.1.45.1.3.1.8.1.5 | Columns3CommonBoardReset | read-write | mandatory | This indicates the reset state of the board. Writing with the value reset (2) will reset the board. |
| 1.3.6.1.4.1.45.1.3.1.8.1.6 | Columns3CommonBoardPartStatus | read-write | mandatory | Tells whether the board is partitioned or enabled. Writing with the value partition(2) will partition the board indefinitely and writing with the value enabled… |
| 1.3.6.1.4.1.45.1.3.1.8.1.7 | Columns3CommonBoardNmCntlStatus | read-only | mandatory | Tells whether the board is under network management control. The value nmControl(2) indicates that the board or one or more ports are being controlled by netwo… |
| 1.3.6.1.4.1.45.1.3.1.8.1.8 | Columns3CommonBoardPsStatus | read-only | mandatory | This indicates the operational status of the board power supply. A fail(2) indicates that one of the power supplies on the board has failed. |
| 1.3.6.1.4.1.45.1.3.1.8.1.9 | Columns3CommonBoardPartTime | read-write | mandatory | When partitioning the board for a specified time, s3CommonBoardPartStatus must be set with timedPartition(3) and this object must be supplied with the duration… |
| 1.3.6.1.4.1.45.1.3.1.9 | Scalars3SlotConfigOctetString | read-only | mandatory | Packed octet string for the slot configuration table. Format is specified in SynOptics technical documents. NOTE: the 291x FDDI workgroup concentrators actuall… |
| 1.3.6.1.4.1.45.1.3.1.10 | Nodes3000RedundantPs | |||
| 1.3.6.1.4.1.45.1.3.1.10.1 | Scalars3RedPsPlus5vCurrent | read-only | mandatory | This gauge is measured in amperes. |
| 1.3.6.1.4.1.45.1.3.1.10.2 | Scalars3RedPsPlus12vCurrent | read-only | mandatory | This gauge is measured in amperes. |
| 1.3.6.1.4.1.45.1.3.1.10.3 | Scalars3RedPsAmbientTempStatus | read-only | mandatory | This status indicates whether the ambient temperature is normal, i.e., below 40 degree C. |
| 1.3.6.1.4.1.45.1.3.1.10.4 | Scalars3RedPsAmbientTemperature | read-only | mandatory | This gauge is measured in Celsius. |
| 1.3.6.1.4.1.45.1.3.1.10.5 | Scalars3RedPsPrimaryConfig | read-only | mandatory | This indicates the primary power supply type (PS 1). Note that value redundantCapable(5) should not be returned for this object. |
| 1.3.6.1.4.1.45.1.3.1.10.6 | Scalars3RedPsSecondaryConfig | read-only | mandatory | This indicates the secondary power supply type (PS 2). Note that value redundantCapable(5) should not be returned for this object. |
| 1.3.6.1.4.1.45.1.3.1.10.7 | Scalars3RedPsDiodeStatus | read-only | mandatory | This gives the status of the summing diode on the 3100R associated with the indicated power supply. |
| 1.3.6.1.4.1.45.1.3.1.10.8 | Scalars3RedPsPowerAlarm | read-only | mandatory | This tells whether the indicated power supply is sensing voltage on the backplane. |
| 1.3.6.1.4.1.45.1.3.1.11 | Scalars3ChassisBkPlEthChanDiv | read-only | mandatory | A value that describes the divisions of the segmentable ethernet channel. For those devices that do not implement a backplane with this feature, they still nee… |
| 1.3.6.1.4.1.45.1.3.1.12 | Scalars3ChassisEnetChannelAType | read-only | mandatory | The agent will return aSegmentable(2) for the 3000N, 3000NT, 3000S, 3000SR, and any other backplanes in which Ethernet channel A can be divided into multiple s… |
| 1.3.6.1.4.1.45.1.3.2 | Nodes3000Ethernet | |||
| 1.3.6.1.4.1.45.1.3.3 | Nodes3000TokenRing | |||
| 1.3.6.1.4.1.45.1.3.4 | Nodes3000FDDI | |||
| 1.3.6.1.4.1.45.1.3.5 | Nodes3000Bridge | |||
| 1.3.6.1.4.1.45.1.3.6 | Nodes3000TerminalServer | |||
| 1.3.6.1.4.1.45.1.3.7 | Nodes3000LattisTalk | |||
| 1.3.6.1.4.1.45.1.3.8 | Nodes3000Trb |