SYSLOG-MIB
16 objects
The Structure of System Log Information for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.12 | IdentityswSysLogMIB | The Structure of System Log Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.12.12.1 | ScalarswSysLogCtrlState | read-write | current | This object can be enabled or disabled functionality of System Log during runtime of the system. |
| 1.3.6.1.4.1.171.12.12.2 | TableswSysLogServerTable | not-accessible | current | This table contain System Log Server information. |
| 1.3.6.1.4.1.171.12.12.2.1 | RowswSysLogServerEntry | not-accessible | current | A list of information about System Log Server. |
| 1.3.6.1.4.1.171.12.12.2.1.1 | ColumnswSysLogServerIndex | read-only | current | The index of System Log Server entry ,and is unique. |
| 1.3.6.1.4.1.171.12.12.2.1.2 | ColumnswSysLogServerIPAddress | read-create | current | specifies the IP address of the System Log Server. |
| 1.3.6.1.4.1.171.12.12.2.1.3 | ColumnswSysLogServerFacility | read-create | current | syslog Message Facilities |
| 1.3.6.1.4.1.171.12.12.2.1.4 | ColumnswSysLogServerSeverity | read-create | current | syslog Message Severities |
| 1.3.6.1.4.1.171.12.12.2.1.5 | ColumnswSysLogServerUDPPort | read-create | current | syslog uses the user datagram protocol (UDP) as its underlying tranaposrt layer mechanism. The UDP port that has been assigned to syslog is 514. It is RECOMMEN… |
| 1.3.6.1.4.1.171.12.12.2.1.6 | ColumnswSysLogServerState | read-create | current | enabled or disabled the specific System Log Server during runtime. |
| 1.3.6.1.4.1.171.12.12.2.1.7 | ColumnswSysLogServerRowStatus | read-create | current | indicates the status of this entry. When creating a syslog server entry, the IP address should be set, too. |
| 1.3.6.1.4.1.171.12.12.3 | NodeswLogSaveCtrl | |||
| 1.3.6.1.4.1.171.12.12.3.1 | ScalarswLogSaveMethod | read-write | current | Used to show and configure the method to save log. when set time-interval(1),Save log to flash every swLogSaveTimeInterval minutes. (if no log happened in this… |
| 1.3.6.1.4.1.171.12.12.3.2 | ScalarswLogSaveTimeInterval | read-write | current | The time(minutes) interval to save log to flash. It can only be set when you have selected the time-interval(1) in swLogSaveMethod. |
| 1.3.6.1.4.1.171.12.12.4 | NodeswSysLogCtrl | |||
| 1.3.6.1.4.1.171.12.12.4.1 | ScalarswSysLogCtrlClearLog | read-write | current | Clear the switch history log. |