MIB Viewer

SYSLOG-R-MIB

52 objects
Syslog MIB.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType
RAD-SMI-MIBradExperimental
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus StorageType TEXTUAL-CONVENTION TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.4.1.164.20.14IdentitysyslogMIBRSyslog MIB.
1.3.6.1.4.1.164.20.14.0NodesyslogNotifications
1.3.6.1.4.1.164.20.14.0.1NotificationsyslogStatusChangedcurrentThis notification is sent when a syslog entity changes state. For example when the syslog entity starts [syslogOperationsStatus is ''started'' ] or the syslog …
1.3.6.1.4.1.164.20.14.1NodesyslogObjects
1.3.6.1.4.1.164.20.14.1.1NodesyslogSystem
1.3.6.1.4.1.164.20.14.1.1.1ScalarsyslogDefaultServiceread-onlycurrentThe default service name or port number that a syslog receiver will bind to.
1.3.6.1.4.1.164.20.14.1.1.2ScalarsyslogDefaultEncapsulationread-onlycurrentThe default encapsulation used by a syslog receiver to receive syslog messages.
1.3.6.1.4.1.164.20.14.1.2TablesyslogControlTablenot-accessiblecurrentA table containing the configuration parameters pertaining to the syslog entities serviced by an SNMP agent.
1.3.6.1.4.1.164.20.14.1.2.1RowsyslogControlEntrynot-accessiblecurrentThe configuration parameters pertaining to a syslog entity.
1.3.6.1.4.1.164.20.14.1.2.1.1ColumnsyslogControlIndexnot-accessiblecurrentThe Index that uniquely identifies the syslog entity in the syslogControlTable. The value of the index for a syslog entity may not be the same across system re…
1.3.6.1.4.1.164.20.14.1.2.1.2ColumnsyslogControlDescrread-createcurrentA user definable description of the syslog entity. This description could be used by syslog management applications e.g. in reports or in user interfaces.
1.3.6.1.4.1.164.20.14.1.2.1.3ColumnsyslogControlRolesread-createcurrentThe roles of the syslog entity.
1.3.6.1.4.1.164.20.14.1.2.1.4ColumnsyslogControlBindAddrTyperead-createcurrentThe type of Internet address which follows in syslogControlBindAddr. If this syslog entity is not a syslog receiver, the value of this object will be 'unknown'…
1.3.6.1.4.1.164.20.14.1.2.1.5ColumnsyslogControlBindAddrread-createcurrentThe specific address the syslog receiver will bind to. The format of the address is specified by the corresponding syslogControlBindAddrType object. If the add…
1.3.6.1.4.1.164.20.14.1.2.1.6ColumnsyslogControlServiceread-createcurrentThe service name or port number that this syslog receiver will bind to. If this syslog entity is not a syslog receiver the value of this object will be zero. I…
1.3.6.1.4.1.164.20.14.1.2.1.7ColumnsyslogControlEncapsulationread-createcurrentThe encapsulation that will be used for syslog messages by the syslog receiver. If this syslog entity is not a syslog receiver the value of this object will be…
1.3.6.1.4.1.164.20.14.1.2.1.8ColumnsyslogControlMaxMessageSizeread-createcurrentThe maximum size of the syslog messages in bytes for this syslog entity. A syslog receiver may reject or truncate messages larger than the specified maximum sy…
1.3.6.1.4.1.164.20.14.1.2.1.9ColumnsyslogControlConfFileNameread-createcurrentThe fullpath name of the configuration file where the syslog entity's message selection and corresponding action rules will be read from. If the syslog entity …
1.3.6.1.4.1.164.20.14.1.2.1.11ColumnsyslogControlStorageTyperead-createcurrentThis object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up by non-volatile or permanent …
1.3.6.1.4.1.164.20.14.1.2.1.12ColumnsyslogControlRowStatusread-createcurrentThis object is used to create, modify and delete rows in the syslogControlTable. The value of syslogControlDescr can be changed when this object is in state ''…
1.3.6.1.4.1.164.20.14.1.2.1.13ColumnsyslogControlAccountingTyperead-createcurrentThe accounting type can be configured as: Bit 0 = shell (login and logout events) Bit 1 = system (system events and alarms) Bit 2 = commands (CLI commands) By …
1.3.6.1.4.1.164.20.14.1.3TablesyslogOperationsTablenot-accessiblecurrentA table containing operations information about the syslog entities serviced by an SNMP agent. This table complements the (configuration) information in syslog…
1.3.6.1.4.1.164.20.14.1.3.1RowsyslogOperationsEntrynot-accessiblecurrentThe operations information pertaining to a syslog entity.
1.3.6.1.4.1.164.20.14.1.3.1.1ColumnsyslogOperationsMsgsReceivedread-onlycurrentThe number of messages received by the syslog receiver. This includes messages that were discarded. If this syslog entity is not a syslog receiver the value of…
1.3.6.1.4.1.164.20.14.1.3.1.2ColumnsyslogOperationsMsgsTransmittedread-onlycurrentThe number of messages transmitted by the syslog sender. This does not include the messages that could not be queued for transmission by the syslog sender. If …
1.3.6.1.4.1.164.20.14.1.3.1.3ColumnsyslogOperationsMsgsRelayedread-onlycurrentThe number of messages relayed by the syslog relay to other syslog entities. If this syslog entity is not a syslog relay the value of this object will be zero.…
1.3.6.1.4.1.164.20.14.1.3.1.4ColumnsyslogOperationsMsgsDroppedread-onlycurrentThe number of messages that could not be queued for transmission by the syslog sender. If this syslog entity is not a syslog sender the value of this object wi…
1.3.6.1.4.1.164.20.14.1.3.1.5ColumnsyslogOperationsMsgsMalFormedread-onlycurrentThe number of messages received by the syslog receiver which had malformed header. If this syslog entity is not a syslog receiver, then this object will have a…
1.3.6.1.4.1.164.20.14.1.3.1.6ColumnsyslogOperationsMsgsDiscardedread-onlycurrentThe number of messages that were discarded by the syslog receiver. This will include messages that were discarded because the message size was greater than the…
1.3.6.1.4.1.164.20.14.1.3.1.7ColumnsyslogOperationsLastMsgRecdTimeread-onlycurrentThe value of sysUpTime when the last message was received by the syslog receiver. If this syslog entity is not a syslog receiver or, if no messages have been r…
1.3.6.1.4.1.164.20.14.1.3.1.8ColumnsyslogOperationsLastMsgTransmittedTimeread-onlycurrentThe value of sysUpTime when the last message was transmitted by the syslog sender. If this syslog entity is not a syslog sender or, if no messages have been tr…
1.3.6.1.4.1.164.20.14.1.3.1.9ColumnsyslogOperationsStartTimeread-onlycurrentThe value of sysUpTime when this syslog entity was started.
1.3.6.1.4.1.164.20.14.1.3.1.10ColumnsyslogOperationsLastErrorread-onlycurrentA description of the last error related to sending, receiving or processing a syslog message that was encountered by this syslog entity. If no error has been e…
1.3.6.1.4.1.164.20.14.1.3.1.11ColumnsyslogOperationsLastErrorTimeread-onlycurrentThe value of sysUpTime when the last error was encountered. If no error has been encountered by this syslog entity since the last re-initialization of the loca…
1.3.6.1.4.1.164.20.14.1.3.1.12ColumnsyslogOperationsRunIndexread-onlycurrentIf the Host resource MIB is instantiated on the host then this entry will have the value of the hrSWRunIndex of the corresponding entry in the hrSWRunTable. No…
1.3.6.1.4.1.164.20.14.1.3.1.13ColumnsyslogOperationsCounterDiscontinuityTimeread-onlycurrentThe value of sysUpTime on the most recent occasion at which any one or more of this syslog entity's counters, viz., counters with OID prefix 'syslogOperationsM…
1.3.6.1.4.1.164.20.14.1.3.1.14ColumnsyslogOperationsStatusread-onlycurrentThe status of the syslog entity.
1.3.6.1.4.1.164.20.14.3NodesyslogConformance
1.3.6.1.4.1.164.20.14.3.1NodesyslogGroups
1.3.6.1.4.1.164.20.14.3.1.1GroupsyslogDefaultGroupcurrentA collection of objects providing default parameters for syslog entities
1.3.6.1.4.1.164.20.14.3.1.2GroupsyslogOperationsGroupcurrentA collection of objects providing message related statistics.
1.3.6.1.4.1.164.20.14.3.1.3GroupsyslogControlGroupcurrentA collection of objects representing the run time parameters for the syslog entities.
1.3.6.1.4.1.164.20.14.3.1.4GroupsyslogNotificationGroupcurrentA collection of notifications about the operational state of a syslog entity.
1.3.6.1.4.1.164.20.14.3.2NodesyslogCompliances
1.3.6.1.4.1.164.20.14.3.2.1CompliancesyslogFullCompliance1currentThe compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be bo…
1.3.6.1.4.1.164.20.14.3.2.2CompliancesyslogFullCompliance2currentThe compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and c…
1.3.6.1.4.1.164.20.14.3.2.3CompliancesyslogReadOnlyCompliance1read-onlycurrentThe compliance statement for SNMP entities which implement the syslog MIB without support for read-write (i.e. in read-only mode). It can also send notificatio…
1.3.6.1.4.1.164.20.14.3.2.4CompliancesyslogReadOnlyCompliance2read-onlycurrentThe compliance statement for SNMP entities which implement the syslog MIB without support for read-write (i.e. in read-only mode).
1.3.6.1.4.1.164.20.14.3.2.5CompliancesyslogNotificationCompliancecurrentThe compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a syslog ent…
Type Definitions
NameSyntaxStatusDescription
SyslogEncapsulationINTEGER { other (1), none (2), tls (3), beep (4) }currentThis textual convention enumerates the encapsulations of the syslog message that is used between syslog application endpoints.
SyslogRolesBITS { sender (0), receiver (1), relay (2) }currentThis textual convention enumerates the roles of a syslog entity. Note that a syslog entity can have multiple roles.
SyslogServiceOCTET STRING (SIZE (0..255))currentThe service name or port number that this syslog receiver will bind to. The service name must resolve to a port number on the local host.