Sentry3-MIB
154 objects
This is the MIB module for the third generation of the Sentry product family. This includes the Sentry Remote Power Manager (RPM), Sentry Power Distribution Unit (PDU), Sentry Environmental Monitor (EM), Sentry Smart and Switched Cabinet Distribution Unit (CDU), and Sentry Switched -48 VDC.
Imported Objects
| SNMPv2-SMI | enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1718 | NodeserverTech | |||
| 1.3.6.1.4.1.1718.3 | Identitysentry3 | This is the MIB module for the third generation of the Sentry product family. This includes the Sentry Remote Power Manager (RPM), Sentry Power Distribution Un… | ||
| 1.3.6.1.4.1.1718.3.1 | NodesystemGroup | |||
| 1.3.6.1.4.1.1718.3.1.1 | ScalarsystemVersion | read-only | current | The firmware version of the system. |
| 1.3.6.1.4.1.1718.3.1.2 | ScalarsystemNICSerialNumber | read-only | current | The serial number of the network interface card in the system. |
| 1.3.6.1.4.1.1718.3.1.3 | ScalarsystemLocation | read-write | current | The location of the system. |
| 1.3.6.1.4.1.1718.3.1.4 | ScalarsystemTowerCount | read-only | current | The number of towers in the system. |
| 1.3.6.1.4.1.1718.3.1.5 | ScalarsystemEnvMonCount | read-only | current | The number of environmental monitors in the system. |
| 1.3.6.1.4.1.1718.3.1.6 | ScalarsystemTotalPower | read-only | current | The total power consumption of all of the input feeds in the system. A non-negative value indicates the total power consumption in Watts. A negative value indi… |
| 1.3.6.1.4.1.1718.3.1.7 | ScalarsystemArea | read-write | current | The area that the footprint of the system occupies. A non-zero non-negative value indicates the area in tenths of area units as selected by the systemAreaUnit … |
| 1.3.6.1.4.1.1718.3.1.8 | ScalarsystemWattsPerAreaUnit | read-only | current | The system Watts per area unit. A non-negative value indicates the power consumption per area unit as selected by the systemAreaUnit object. A negative value i… |
| 1.3.6.1.4.1.1718.3.1.9 | ScalarsystemAreaUnit | read-write | current | The unit of area for the systemArea and systemWattsPerAreaUnit objects. If the agent does not support this object, then the unit of area is a square foot. |
| 1.3.6.1.4.1.1718.3.1.10 | ScalarsystemPowerFactor | read-write | current | The power factor used in power calculations performed by the system. |
| 1.3.6.1.4.1.1718.3.1.11 | ScalarsystemFeatures | read-only | current | The key-activated features enabled in the system. |
| 1.3.6.1.4.1.1718.3.1.12 | ScalarsystemFeatureKey | read-write | current | A valid feature key written to this object will enable a feature in the system. A valid feature key is in the form xxxx-xxxx-xxxx-xxxx. A read of this object r… |
| 1.3.6.1.4.1.1718.3.1.13 | ScalarsystemOutletSeqInterval | read-write | current | The power-on sequencing interval for all outlets. |
| 1.3.6.1.4.1.1718.3.1.14 | ScalarsystemOutletRebootDelay | read-write | current | The reboot delay for all outlets. |
| 1.3.6.1.4.1.1718.3.1.15 | ScalarsystemConfigModifiedCount | read-only | current | The total number of times the system configuration has changed. |
| 1.3.6.1.4.1.1718.3.2 | NodesystemTables | |||
| 1.3.6.1.4.1.1718.3.2.1 | TabletowerTable | not-accessible | current | A table of towers. |
| 1.3.6.1.4.1.1718.3.2.1.1 | RowtowerEntry | not-accessible | current | Row definition for the tower table. |
| 1.3.6.1.4.1.1718.3.2.1.1.1 | ColumntowerIndex | not-accessible | current | Index for the tower table. |
| 1.3.6.1.4.1.1718.3.2.1.1.2 | ColumntowerID | read-only | current | The ID of the tower. |
| 1.3.6.1.4.1.1718.3.2.1.1.3 | ColumntowerName | read-write | current | The name of the tower. |
| 1.3.6.1.4.1.1718.3.2.1.1.4 | ColumntowerStatus | read-only | current | The operational status of the tower. |
| 1.3.6.1.4.1.1718.3.2.1.1.5 | ColumntowerInfeedCount | read-only | current | The number of input feeds on the tower. |
| 1.3.6.1.4.1.1718.3.2.1.1.6 | ColumntowerProductSN | read-only | current | The product serial number of the tower. |
| 1.3.6.1.4.1.1718.3.2.1.1.7 | ColumntowerModelNumber | read-only | current | The model number of the tower. |
| 1.3.6.1.4.1.1718.3.2.1.1.8 | ColumntowerCapabilities | read-only | current | The capabilities of the tower. |
| 1.3.6.1.4.1.1718.3.2.1.1.9 | ColumntowerVACapacity | read-only | current | The total apparent power capacity of the tower circuit. A non-negative value indicates the maximum total apparent power in Volt-Amps. A negative value indicate… |
| 1.3.6.1.4.1.1718.3.2.1.1.10 | ColumntowerVACapacityUsed | read-only | current | The used percentage of the tower circuit total apparent power capacity (towerApparentPower / towerVACapacity x 100). A non-negative value indicates the percent… |
| 1.3.6.1.4.1.1718.3.2.1.1.11 | ColumntowerActivePower | read-only | current | The total active power consumption of the tower circuit. A non-negative value indicates the total active power consumption in Watts. A negative value indicates… |
| 1.3.6.1.4.1.1718.3.2.1.1.12 | ColumntowerApparentPower | read-only | current | The total apparent power consumption of the tower circuit. A non-negative value indicates the total apparent power consumption in Volt-Amps. A negative value i… |
| 1.3.6.1.4.1.1718.3.2.1.1.13 | ColumntowerPowerFactor | read-only | current | The overall power factor of the tower circuit. A non- negative value indicates the overall power factor in hundredths. A negative value indicates that the over… |
| 1.3.6.1.4.1.1718.3.2.1.1.14 | ColumntowerEnergy | read-only | current | The total energy consumption of the tower circuit. A non- negative value indicates the total energy consumption in Kilowatt-Hours. A negative value indicates t… |
| 1.3.6.1.4.1.1718.3.2.1.1.15 | ColumntowerLineFrequency | read-only | current | The frequency of the input feed line voltage. A non- negative value indicates the frequency in Hertz. A negative value indicates that the frequency was not ava… |
| 1.3.6.1.4.1.1718.3.2.2 | TableinfeedTable | not-accessible | current | A table of input feeds. |
| 1.3.6.1.4.1.1718.3.2.2.1 | RowinfeedEntry | not-accessible | current | Row definition for the input feed table. |
| 1.3.6.1.4.1.1718.3.2.2.1.1 | ColumninfeedIndex | not-accessible | current | Index for the input feed table. |
| 1.3.6.1.4.1.1718.3.2.2.1.2 | ColumninfeedID | read-only | current | The ID of the input feed. |
| 1.3.6.1.4.1.1718.3.2.2.1.3 | ColumninfeedName | read-write | current | The name of the input feed. |
| 1.3.6.1.4.1.1718.3.2.2.1.4 | ColumninfeedCapabilities | read-only | current | The capabilities of the input feed. |
| 1.3.6.1.4.1.1718.3.2.2.1.5 | ColumninfeedStatus | read-only | current | The status of the input feed line. If the infeedCapabilities 'onSense' bit is TRUE, then all of the states are supported and indicate the sensed state of the i… |
| 1.3.6.1.4.1.1718.3.2.2.1.6 | ColumninfeedLoadStatus | read-only | current | The status of the load measured on the input feed line. If the infeedCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the infeedC… |
| 1.3.6.1.4.1.1718.3.2.2.1.7 | ColumninfeedLoadValue | read-only | current | The load measured on the input feed line. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value … |
| 1.3.6.1.4.1.1718.3.2.2.1.8 | ColumninfeedLoadHighThresh | read-write | current | The load high threshold value of the input feed line in Amps. |
| 1.3.6.1.4.1.1718.3.2.2.1.9 | ColumninfeedOutletCount | read-only | current | The number of controlled and/or monitored outlets on the input feed. |
| 1.3.6.1.4.1.1718.3.2.2.1.10 | ColumninfeedCapacity | read-only | current | The load capacity of the input feed line. A non-negative value indicates the maximum load in Amps. A negative value indicates that the capacity was not availab… |
| 1.3.6.1.4.1.1718.3.2.2.1.11 | ColumninfeedVoltage | read-only | current | The line-to-line voltage of the input feed. A non-negative value indicates the voltage in tenths of Volts. A negative value indicates that the voltage was not … |
| 1.3.6.1.4.1.1718.3.2.2.1.12 | ColumninfeedPower | read-only | current | The active power consumption of the input feed phase. A non- negative value indicates the active power consumption in Watts. A negative value indicates that th… |
| 1.3.6.1.4.1.1718.3.2.2.1.13 | ColumninfeedApparentPower | read-only | current | The apparent power consumption of the input feed phase. A non-negative value indicates the apparent power consumption in Volt-Amps. A negative value indicates … |
| 1.3.6.1.4.1.1718.3.2.2.1.14 | ColumninfeedPowerFactor | read-only | current | The power factor of the input feed phase. A non-negative value indicates the power factor in hundredths. A negative value indicates that the power factor was n… |
| 1.3.6.1.4.1.1718.3.2.2.1.15 | ColumninfeedCrestFactor | read-only | current | The crest factor for the load of the input feed phase. A non-negative value indicates the crest factor in tenths. A negative value indicates that the crest fac… |
| 1.3.6.1.4.1.1718.3.2.2.1.16 | ColumninfeedEnergy | read-only | current | The energy consumption of the input feed phase. A non- negative value indicates the energy consumption in tenths of Kilowatt-Hours. A negative value indicates … |
| 1.3.6.1.4.1.1718.3.2.2.1.17 | ColumninfeedReactance | read-only | current | The characterization of the phase relation between the voltage and current of the input feed phase. |
| 1.3.6.1.4.1.1718.3.2.2.1.18 | ColumninfeedPhaseVoltage | read-only | current | The voltage measured for the input feed phase. A non- negative value indicates the voltage in tenths of Volts. A negative value indicates that the voltage was … |
| 1.3.6.1.4.1.1718.3.2.2.1.19 | ColumninfeedPhaseCurrent | read-only | current | The current measured for the input feed phase. A non- negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load … |
| 1.3.6.1.4.1.1718.3.2.2.1.20 | ColumninfeedCapacityUsed | read-only | current | The used percentage of the input feed line load capacity (infeedLoadValue / infeedCapacity x 100). A non-negative value indicates the percentage of capacity us… |
| 1.3.6.1.4.1.1718.3.2.2.1.21 | ColumninfeedLineID | read-only | current | The ID of the input feed line. |
| 1.3.6.1.4.1.1718.3.2.2.1.22 | ColumninfeedLineToLineID | read-only | current | The line-to-line ID of the input feed. |
| 1.3.6.1.4.1.1718.3.2.2.1.23 | ColumninfeedPhaseID | read-only | current | The ID of the input feed phase. |
| 1.3.6.1.4.1.1718.3.2.2.1.24 | ColumninfeedVACapacity | read-only | current | The apparent power capacity of the input feed circuit. A non-negative value indicates the maximum apparent power in Volt-Amps. A negative value indicates that … |
| 1.3.6.1.4.1.1718.3.2.2.1.25 | ColumninfeedVACapacityUsed | read-only | current | The used percentage of the input feed circuit apparent power capacity (infeedApparentPower / infeedVACapacity x 100). A non-negative value indicates the percen… |
| 1.3.6.1.4.1.1718.3.2.3 | TableoutletTable | not-accessible | current | A table of outlets. |
| 1.3.6.1.4.1.1718.3.2.3.1 | RowoutletEntry | not-accessible | current | Row definition for the outlet table. |
| 1.3.6.1.4.1.1718.3.2.3.1.1 | ColumnoutletIndex | not-accessible | current | Index for the outlet table. |
| 1.3.6.1.4.1.1718.3.2.3.1.2 | ColumnoutletID | read-only | current | The ID of the outlet. |
| 1.3.6.1.4.1.1718.3.2.3.1.3 | ColumnoutletName | read-write | current | The name of the outlet. |
| 1.3.6.1.4.1.1718.3.2.3.1.4 | ColumnoutletCapabilities | read-only | current | The capabilities of the outlet. |
| 1.3.6.1.4.1.1718.3.2.3.1.5 | ColumnoutletStatus | read-only | current | The status of the outlet. If the outletCapabilities 'onSense' bit is TRUE, then the state indicates the sensed state of the outlet, not a derived state, and 'o… |
| 1.3.6.1.4.1.1718.3.2.3.1.6 | ColumnoutletLoadStatus | read-only | current | The status of the load measured on the outlet. If the outletCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the outletCapabiliti… |
| 1.3.6.1.4.1.1718.3.2.3.1.7 | ColumnoutletLoadValue | read-only | current | The load measured on the outlet. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was not a… |
| 1.3.6.1.4.1.1718.3.2.3.1.8 | ColumnoutletLoadLowThresh | read-write | current | The load low threshold value of the outlet in Amps. |
| 1.3.6.1.4.1.1718.3.2.3.1.9 | ColumnoutletLoadHighThresh | read-write | current | The load high threshold value of the outlet in Amps. |
| 1.3.6.1.4.1.1718.3.2.3.1.10 | ColumnoutletControlState | read-only | current | The control state of the outlet. The supported states are dependent upon the outletCapabilities 'powerControl' and 'shutdown' bits, as well as the supported fe… |
| 1.3.6.1.4.1.1718.3.2.3.1.11 | ColumnoutletControlAction | read-write | current | An action to change the control state of the outlet. If the outletCapabilities 'powerControl' bit is TRUE, then the 'on', 'off', and 'reboot' actions can be us… |
| 1.3.6.1.4.1.1718.3.2.3.1.12 | ColumnoutletCapacity | read-only | current | The load capacity of the outlet. A non-negative value indicates the maximum load in Amps. A negative value indicates that the capacity was not available. |
| 1.3.6.1.4.1.1718.3.2.3.1.13 | ColumnoutletVoltage | read-only | current | The voltage of the outlet. A non-negative value indicates the voltage in tenths of Volts. A negative value indicates that the voltage was not available. |
| 1.3.6.1.4.1.1718.3.2.3.1.14 | ColumnoutletPower | read-only | current | The active power consumption of the device plugged into the outlet. A non-negative value indicates the active power consumption in Watts. A negative value indi… |
| 1.3.6.1.4.1.1718.3.2.3.1.15 | ColumnoutletApparentPower | read-only | current | The apparent power consumption of the device plugged into the outlet. A non-negative value indicates the apparent power consumption in Volt-Amps. A negative va… |
| 1.3.6.1.4.1.1718.3.2.3.1.16 | ColumnoutletPowerFactor | read-only | current | The power factor of the device plugged into the outlet. A non-negative value indicates the power factor in hundredths. A negative value indicates that the powe… |
| 1.3.6.1.4.1.1718.3.2.3.1.17 | ColumnoutletCrestFactor | read-only | current | The crest factor for the load of the device plugged into the outlet. A non-negative value indicates the crest factor in tenths. A negative value indicates that… |
| 1.3.6.1.4.1.1718.3.2.3.1.18 | ColumnoutletEnergy | read-only | current | The energy consumption of the device plugged into the outlet. A non-negative value indicates the energy consumption in Watt-Hours. A negative value indicates t… |
| 1.3.6.1.4.1.1718.3.2.3.1.19 | ColumnoutletWakeupState | read-write | current | The wakeup state of the outlet. |
| 1.3.6.1.4.1.1718.3.2.3.1.20 | ColumnoutletPostOnDelay | read-write | current | The post-on delay of the outlet. |
| 1.3.6.1.4.1.1718.3.2.4 | TableenvMonTable | not-accessible | current | A table of environmental monitors. |
| 1.3.6.1.4.1.1718.3.2.4.1 | RowenvMonEntry | not-accessible | current | Row definition for the environmental monitor table. |
| 1.3.6.1.4.1.1718.3.2.4.1.1 | ColumnenvMonIndex | not-accessible | current | Index for the environmental monitor table. |
| 1.3.6.1.4.1.1718.3.2.4.1.2 | ColumnenvMonID | read-only | current | The ID of the environmental monitor. |
| 1.3.6.1.4.1.1718.3.2.4.1.3 | ColumnenvMonName | read-write | current | The name of the environmental monitor. |
| 1.3.6.1.4.1.1718.3.2.4.1.4 | ColumnenvMonStatus | read-only | current | The operational status of the environmental monitor. |
| 1.3.6.1.4.1.1718.3.2.4.1.5 | ColumnenvMonWaterSensorName | read-write | current | The name of the water sensor. |
| 1.3.6.1.4.1.1718.3.2.4.1.6 | ColumnenvMonWaterSensorStatus | read-only | current | The status of the water sensor. |
| 1.3.6.1.4.1.1718.3.2.4.1.7 | ColumnenvMonADCName | read-write | current | The name of the analog-to-digital converter. |
| 1.3.6.1.4.1.1718.3.2.4.1.8 | ColumnenvMonADCStatus | read-only | current | The status of the analog-to-digital converter. |
| 1.3.6.1.4.1.1718.3.2.4.1.9 | ColumnenvMonADCCount | read-only | current | The 8-bit count value from the analog-to-digital converter. A non-negative value indicates the digital value retrieved from the ADC. A negative value indicates… |
| 1.3.6.1.4.1.1718.3.2.4.1.10 | ColumnenvMonADCLowThresh | read-write | current | The 8-bit count low threshold value of the analog-to-digital converter. |
| 1.3.6.1.4.1.1718.3.2.4.1.11 | ColumnenvMonADCHighThresh | read-write | current | The 8-bit count high threshold value of the analog-to-digital converter. |
| 1.3.6.1.4.1.1718.3.2.4.1.12 | ColumnenvMonTempHumidSensorCount | read-only | current | The number of temperature/humidity sensors on the environmental monitor. |
| 1.3.6.1.4.1.1718.3.2.4.1.13 | ColumnenvMonContactClosureCount | read-only | current | The number of contact closures on the environmental monitor. |
| 1.3.6.1.4.1.1718.3.2.5 | TabletempHumidSensorTable | not-accessible | current | A table of temperature/humidity sensors. |
| 1.3.6.1.4.1.1718.3.2.5.1 | RowtempHumidSensorEntry | not-accessible | current | Row definition for the temperature/humidity sensor table. |
| 1.3.6.1.4.1.1718.3.2.5.1.1 | ColumntempHumidSensorIndex | not-accessible | current | Index for the temperature/humidity sensor table. |
| 1.3.6.1.4.1.1718.3.2.5.1.2 | ColumntempHumidSensorID | read-only | current | The ID of the temperature/humidity sensor. |
| 1.3.6.1.4.1.1718.3.2.5.1.3 | ColumntempHumidSensorName | read-write | current | The name of the temperature/humidity sensor. |
| 1.3.6.1.4.1.1718.3.2.5.1.4 | ColumntempHumidSensorStatus | read-only | current | The operational status of the temperature/humidity sensor. |
| 1.3.6.1.4.1.1718.3.2.5.1.5 | ColumntempHumidSensorTempStatus | read-only | current | The status of the temperature sensor. |
| 1.3.6.1.4.1.1718.3.2.5.1.6 | ColumntempHumidSensorTempValue | read-only | current | The temperature measured by the sensor. A non-negative value indicates the measured temperature in tenths of degrees, using the scale selected by tempHumidSens… |
| 1.3.6.1.4.1.1718.3.2.5.1.7 | ColumntempHumidSensorTempLowThresh | read-write | current | The temperature low threshold value of the sensor in degrees, using the scale selected by tempHumidSensorTempScale. If the agent does not support the tempHumid… |
| 1.3.6.1.4.1.1718.3.2.5.1.8 | ColumntempHumidSensorTempHighThresh | read-write | current | The temperature high threshold value of the sensor in degrees, using the scale selected by tempHumidSensorTempScale. If the agent does not support the tempHumi… |
| 1.3.6.1.4.1.1718.3.2.5.1.9 | ColumntempHumidSensorHumidStatus | read-only | current | The status of the humidity sensor. |
| 1.3.6.1.4.1.1718.3.2.5.1.10 | ColumntempHumidSensorHumidValue | read-only | current | The humidity measured by the sensor. A non-negative value indicates the measured humidity in percentage relative humidity. A negative value indicates that a hu… |
| 1.3.6.1.4.1.1718.3.2.5.1.11 | ColumntempHumidSensorHumidLowThresh | read-write | current | The humidity low threshold value of the sensor in percentage relative humidity. |
| 1.3.6.1.4.1.1718.3.2.5.1.12 | ColumntempHumidSensorHumidHighThresh | read-write | current | The humidity low threshold value of the sensor in percentage relative humidity. |
| 1.3.6.1.4.1.1718.3.2.5.1.13 | ColumntempHumidSensorTempScale | read-write | current | The scale used for temperature values. This is a global setting for all temperature values in the system. If the agent does not support this object, then the t… |
| 1.3.6.1.4.1.1718.3.2.5.1.14 | ColumntempHumidSensorTempRecDelta | read-write | current | The temperature recovery delta (hysteresis) value of the sensor in degrees, using the scale selected by tempHumidSensorTempScale. |
| 1.3.6.1.4.1.1718.3.2.5.1.15 | ColumntempHumidSensorHumidRecDelta | read-write | current | The humidity recovery delta (hysteresis) value of the sensor in percentage relative humidity. |
| 1.3.6.1.4.1.1718.3.2.6 | TablecontactClosureTable | not-accessible | current | A table of contact closures. |
| 1.3.6.1.4.1.1718.3.2.6.1 | RowcontactClosureEntry | not-accessible | current | Row definition for the contact closure table. |
| 1.3.6.1.4.1.1718.3.2.6.1.1 | ColumncontactClosureIndex | not-accessible | current | Index for the contact closure table. |
| 1.3.6.1.4.1.1718.3.2.6.1.2 | ColumncontactClosureID | read-only | current | The ID of the contact closure. |
| 1.3.6.1.4.1.1718.3.2.6.1.3 | ColumncontactClosureName | read-write | current | The name of the contact closure. |
| 1.3.6.1.4.1.1718.3.2.6.1.4 | ColumncontactClosureStatus | read-only | current | The status of the contact closure. |
| 1.3.6.1.4.1.1718.3.2.7 | TablebranchTable | not-accessible | current | A table of branches. |
| 1.3.6.1.4.1.1718.3.2.7.1 | RowbranchEntry | not-accessible | current | Row definition for the branch table. |
| 1.3.6.1.4.1.1718.3.2.7.1.1 | ColumnbranchIndex | not-accessible | current | Index for the branch table. |
| 1.3.6.1.4.1.1718.3.2.7.1.2 | ColumnbranchID | read-only | current | The ID of the branch. |
| 1.3.6.1.4.1.1718.3.2.7.1.3 | ColumnbranchName | read-write | current | The name of the branch. |
| 1.3.6.1.4.1.1718.3.2.7.1.4 | ColumnbranchCapabilities | read-only | current | The capabilities of the branch. |
| 1.3.6.1.4.1.1718.3.2.7.1.5 | ColumnbranchStatus | read-only | current | The status of the branch. |
| 1.3.6.1.4.1.1718.3.2.7.1.6 | ColumnbranchLoadStatus | read-only | current | The status of the load measured on the branch. |
| 1.3.6.1.4.1.1718.3.2.7.1.7 | ColumnbranchLoadValue | read-only | current | The load measured on the branch. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was not a… |
| 1.3.6.1.4.1.1718.3.2.7.1.8 | ColumnbranchLoadHighThresh | read-write | current | The load high threshold value of the branch in Amps. |
| 1.3.6.1.4.1.1718.3.2.7.1.9 | ColumnbranchCapacity | read-only | current | The load capacity of the branch. A non-negative value indicates the maximum load in Amps. A negative value indicates that the capacity was not available. |
| 1.3.6.1.4.1.1718.3.99 | NodeeventInformationGroup | |||
| 1.3.6.1.4.1.1718.3.99.1 | ScalareventStatusText | read-only | current | The text representation of the enumerated integer value of the status object included in a trap. The value of this object is set only when sent with a trap. A … |
| 1.3.6.1.4.1.1718.3.99.2 | ScalareventStatusCondition | read-only | current | The condition of the enumerated integer value of the status object included in a trap. The value of this object is set only when sent with a trap. A get of thi… |
| 1.3.6.1.4.1.1718.3.100 | Nodesentry3Traps | |||
| 1.3.6.1.4.1.1718.3.100.0 | Nodeevents | |||
| 1.3.6.1.4.1.1718.3.100.0.1 | NotificationtowerStatusEvent | current | Tower status event. If enabled, this trap is sent when the towerStatus indicates an error state ('noComm', 'fanFail', 'overTemp', 'nvmFail', or 'outOfBalance')… | |
| 1.3.6.1.4.1.1718.3.100.0.2 | NotificationinfeedStatusEvent | current | Input feed status event. If enabled, this trap is sent when the infeedStatus indicates an error state ('offError', 'onError', 'noComm', 'offFuse', or 'onFuse')… | |
| 1.3.6.1.4.1.1718.3.100.0.3 | NotificationinfeedLoadEvent | current | Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'no… | |
| 1.3.6.1.4.1.1718.3.100.0.4 | NotificationoutletStatusEvent | current | Outlet status event. If enabled, this trap is sent when the outletStatus indicates an error state ('offError', 'onError', 'noComm', 'offFuse', or 'onFuse'). Th… | |
| 1.3.6.1.4.1.1718.3.100.0.5 | NotificationoutletLoadEvent | current | Outlet load event. If enabled, this trap is sent when the outletLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm… | |
| 1.3.6.1.4.1.1718.3.100.0.6 | NotificationoutletChangeEvent | current | Outlet on/off change event. If enabled, this trap is sent when the outletStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'of… | |
| 1.3.6.1.4.1.1718.3.100.0.7 | NotificationenvMonStatusEvent | current | Environmental monitor status event. If enabled, this trap is sent when the envMonStatus indicates an error state ('noComm'). This trap is repeated periodically… | |
| 1.3.6.1.4.1.1718.3.100.0.8 | NotificationenvMonWaterSensorEvent | current | Environmental monitor water sensor event. If enabled, this trap is sent when the envMonWaterSensorStatus indicates an error state ('alarm'). This trap is repea… | |
| 1.3.6.1.4.1.1718.3.100.0.9 | NotificationenvMonADCEvent | current | Environmental monitor analog-to-digital converter event. If enabled, this trap is sent when the envMonADCStatus indicates an error state ('countLow' or 'countH… | |
| 1.3.6.1.4.1.1718.3.100.0.10 | NotificationtempHumidSensorStatusEvent | current | Temperature/humidity sensor status event. If enabled, this trap is sent when the tempHumidSensorStatus indicates an error state ('lost'). This trap is repeated… | |
| 1.3.6.1.4.1.1718.3.100.0.11 | NotificationtempHumidSensorTempEvent | current | Temperature/humidity sensor temperature event. If enabled, this trap is sent when the tempHumidSensorTempStatus indicates an error state ('tempLow' or 'tempHig… | |
| 1.3.6.1.4.1.1718.3.100.0.12 | NotificationtempHumidSensorHumidEvent | current | Temperature/humidity sensor humidity event. If enabled, this trap is sent when the tempHumidSensorHumidStatus indicates an error state ('humidLow' or 'humidHig… | |
| 1.3.6.1.4.1.1718.3.100.0.13 | NotificationcontactClosureEvent | current | Contact closure event. If enabled, this trap is sent when the contactClosureStatus indicates an error state ('alarm'). This trap is repeated periodically while… | |
| 1.3.6.1.4.1.1718.3.100.0.14 | NotificationbranchStatusEvent | current | Branch status event. If enabled, this trap is sent when the branchStatus indicates an error state ('offError', 'onError', 'noComm', 'offFuse', or 'onFuse'). Th… | |
| 1.3.6.1.4.1.1718.3.100.0.15 | NotificationbranchLoadEvent | current | Branch load event. If enabled, this trap is sent when the branchLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm… |